| Age | Commit message (Collapse) | Author |
|---|
|
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate updates for 6.15 (3/6/25) from Mario Limonciello:
"A lot of code optimization to avoid cases where call paths will end up
calling the same writes multiple times and needlessly caching variables.
To accomplish this some of the writes are now made into an atomically
written "perf" variable. Locking has been overhauled to ensure it only
applies to the necessary functions. Tracing has been adjusted to ensure
trace events only are used right before writing out to the hardware."
NOTE: This is a redo of amd-pstate-v6.15-2025-03-03 with a fixed Fixes tag.
* tag 'amd-pstate-v6.15-2025-03-06' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: (29 commits)
cpufreq/amd-pstate: Drop actions in amd_pstate_epp_cpu_offline()
cpufreq/amd-pstate: Stop caching EPP
cpufreq/amd-pstate: Rework CPPC enabling
cpufreq/amd-pstate: Drop debug statements for policy setting
cpufreq/amd-pstate: Update cppc_req_cached for shared mem EPP writes
cpufreq/amd-pstate: Move all EPP tracing into *_update_perf and *_set_epp functions
cpufreq/amd-pstate: Cache CPPC request in shared mem case too
cpufreq/amd-pstate: Replace all AMD_CPPC_* macros with masks
cpufreq/amd-pstate-ut: Adjust variable scope
cpufreq/amd-pstate-ut: Run on all of the correct CPUs
cpufreq/amd-pstate-ut: Drop SUCCESS and FAIL enums
cpufreq/amd-pstate-ut: Allow lowest nonlinear and lowest to be the same
cpufreq/amd-pstate-ut: Use _free macro to free put policy
cpufreq/amd-pstate: Drop `cppc_cap1_cached`
cpufreq/amd-pstate: Overhaul locking
cpufreq/amd-pstate: Move perf values into a union
cpufreq/amd-pstate: Drop min and max cached frequencies
cpufreq/amd-pstate: Show a warning when a CPU fails to setup
cpufreq/amd-pstate: Invalidate cppc_req_cached during suspend
cpufreq/amd-pstate: Fix the clamping of perf values
...
|
|
This patch is also an issue report. get_cpu_topology will always save
into cpupower_topology a cores size of 0. The code to handle this looks
like it was commented out, and what is commented out is missing a curly
bracket.
https://elixir.bootlin.com/linux/v6.13.5/source/tools/power/cpupower/lib/cpupower.c#L206-L212
Inspiration was taken from psutil to implement this by querying
core_cpu_list. Instead of using a hashmap, I used a sorted array, and
counted the number of valid unique strings. The counting of this takes
place before the qsort for .pkg as the following code says it is
dependent on the order of that sort.
The previous code claimed Intel CPUs are not numbered correctly. I was
not able to reproduce that issue and removed that comment and the code.
This commit was tested with the libcpupower SWIG Python bindings and
performed correctly on 4 different setups. The most notable is the
Framework Intel laptop; a hybrid system of 4 P cores (8 threads) and 8 E
cores (8 threads).
The 4 setups: A 4 core virt-manager VM running Fedora 41 4c/4t (specs not
listed) was tested as a sanity test for VMs. A Lenovo Ryzen 7 Pro 7840HS
8c/16t. A Supermico Intel(R) Xeon(R) Gold 6330 CPU w/ 56c/112t with 2 CPU
sockets. A Framework 12th Gen Intel(R) Core(TM) i5-1240P with hybrid
cores.
CPU(s): 16
On-line CPU(s) list: 0-15
Vendor ID: AuthenticAMD
Model name: AMD Ryzen 7 PRO 7840HS w/ Radeon 780M Graphics
CPU family: 25
Model: 116
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 1
Stepping: 1
CPU(s): 112
On-line CPU(s) list: 0-111
Vendor ID: GenuineIntel
BIOS Vendor ID: Intel(R) Corporation
Model name: Intel(R) Xeon(R) Gold 6330 CPU @ 2.00GHz
BIOS Model name: Intel(R) Xeon(R) Gold 6330 CPU @ 2.00GHz CPU @ 2.0GHz
BIOS CPU family: 179
CPU family: 6
Model: 106
Thread(s) per core: 2
Core(s) per socket: 28
Socket(s): 2
Stepping: 6
CPU(s): 16
On-line CPU(s) list: 0-15
Vendor ID: GenuineIntel
Model name: 12th Gen Intel(R) Core(TM) i5-1240P
CPU family: 6
Model: 154
Thread(s) per core: 2
Core(s) per socket: 12
Socket(s): 1
Stepping: 3
Link: https://lore.kernel.org/r/20250305210901.24177-1-jwyatt@redhat.com
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Remove hard-coded topology depth values and replace them with
defines to improve code readability and maintainability in
cpupower-monitor code.
Link: https://lore.kernel.org/r/20250305225342.19447-3-skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
cmd_monitor() calls get_cpu_topology() to allocate memory for
cpu topology and fails to release in error legs.
Fix it to call cpu_topology_release() from error legs.
Link: https://lore.kernel.org/r/20250305225342.19447-2-skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Notice that em_dev_register_perf_domain() and the functions called by it
do not update objects pointed to by its cb and cpus parameters, so the
const modifier can be added to them.
This allows the return value of cpumask_of() or a pointer to a
struct em_data_callback declared as const to be passed to
em_dev_register_perf_domain() directly without explicit type
casting which is rather handy.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/4648962.LvFx2qVVIh@rjwysocki.net
|
|
The documentation examples in rust/kernel/workqueue.rs use pr_info!
calls that lack a trailing newline. To maintain consistency with
kernel logging practices, this patch adds the newline to all
affected examples.
Fixes: 15b286d1fd05 ("rust: workqueue: add examples")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-5-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The pr_info! example in rust/kernel/sync/locked_by.rs was missing
a newline. This patch appends the missing newline to ensure
that log messages for locked resources display correctly.
Fixes: 7b1f55e3a984 ("rust: sync: introduce `LockedBy`")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-4-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Several pr_info! calls in rust/kernel/init.rs (both in code examples
and macro documentation) were missing a newline, causing logs to
run together. This commit updates these calls to include a trailing
newline, improving readability and consistency with the C side.
Fixes: 6841d45a3030 ("rust: init: add `stack_pin_init!` macro")
Fixes: 7f8977a7fe6d ("rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`")
Fixes: d0fdc3961270 ("rust: init: add `PinnedDrop` trait and macros")
Fixes: 4af84c6a85c6 ("rust: init: update expanded macro explanation")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-3-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. Added
one more Fixes tag (still same set of stable kernels). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and wireless.
Current release - new code bugs:
- wifi: nl80211: disable multi-link reconfiguration
Previous releases - regressions:
- gso: fix ownership in __udp_gso_segment
- wifi: iwlwifi:
- fix A-MSDU TSO preparation
- free pages allocated when failing to build A-MSDU
- ipv6: fix dst ref loop in ila lwtunnel
- mptcp: fix 'scheduling while atomic' in
mptcp_pm_nl_append_new_local_addr
- bluetooth: add check for mgmt_alloc_skb() in
mgmt_device_connected()
- ethtool: allow NULL nlattrs when getting a phy_device
- eth: be2net: fix sleeping while atomic bugs in
be_ndo_bridge_getlink
Previous releases - always broken:
- core: support TCP GSO case for a few missing flags
- wifi: mac80211:
- fix vendor-specific inheritance
- cleanup sta TXQs on flush
- llc: do not use skb_get() before dev_queue_xmit()
- eth: ipa: nable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX}
for v4.7"
* tag 'net-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: ipv6: fix missing dst ref drop in ila lwtunnel
net: ipv6: fix dst ref loop in ila lwtunnel
mctp i3c: handle NULL header address
net: dsa: mt7530: Fix traffic flooding for MMIO devices
net-timestamp: support TCP GSO case for a few missing flags
vlan: enforce underlying device type
mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr
net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device
ppp: Fix KMSAN uninit-value warning with bpf
net: ipa: Enable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX} for v4.7
net: ipa: Fix QSB data for v4.7
net: ipa: Fix v4.7 resource group names
net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error
wifi: nl80211: disable multi-link reconfiguration
net: dsa: rtl8366rb: don't prompt users for LED control
be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink
llc: do not use skb_get() before dev_queue_xmit()
wifi: cfg80211: regulatory: improve invalid hints checking
caif_virtio: fix wrong pointer check in cfv_probe()
net: gso: fix ownership in __udp_gso_segment
...
|
|
Pull smb fixes from Steve French:
"Five SMB server fixes, two related client fixes, and minor MAINTAINERS
update:
- Two SMB3 lock fixes fixes (including use after free and bug on fix)
- Fix to race condition that can happen in processing IPC responses
- Four ACL related fixes: one related to endianness of num_aces, and
two related fixes to the checks for num_aces (for both client and
server), and one fixing missing check for num_subauths which can
cause memory corruption
- And minor update to email addresses in MAINTAINERS file"
* tag 'v6.14-rc5-smb3-fixes' of git://git.samba.org/ksmbd:
cifs: fix incorrect validation for num_aces field of smb_acl
ksmbd: fix incorrect validation for num_aces field of smb_acl
smb: common: change the data type of num_aces to le16
ksmbd: fix bug on trap in smb2_lock
ksmbd: fix use-after-free in smb2_lock
ksmbd: fix type confusion via race condition when using ipc_msg_send_request
ksmbd: fix out-of-bounds in parse_sec_desc()
MAINTAINERS: update email address in cifs and ksmbd entry
|
|
Add compatible string "fsl,imx94-spi" for the i.MX94 chip, which is
backward compatible with i.MX7ULP. Set it to fall back to
"fsl,imx7ulp-spi".
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250306170954.242707-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the CPU goes offline there is no need to change the CPPC request
because the CPU will go into the deepest C-state it supports already.
Actually changing the CPPC request when it goes offline messes up the
cached values and can lead to the wrong values being restored when
it comes back.
Instead drop the actions and if the CPU comes back online let
amd_pstate_epp_set_policy() restore it to expected values.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
EPP values are cached in the cpudata structure per CPU. This is needless
though because they are also cached in the CPPC request variable.
Drop the separate cache for EPP values and always reference the CPPC
request variable when needed.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The CPPC enable register is configured as "write once". That is
any future writes don't actually do anything.
Because of this, all the cleanup paths that currently exist for
CPPC disable are non-effective.
Rework CPPC enable to only enable after all the CAP registers have
been read to avoid enabling CPPC on CPUs with invalid _CPC or
unpopulated MSRs.
As the register is write once, remove all cleanup paths as well.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
There are trace events that exist now for all amd-pstate modes that
will output information right before programming to the hardware.
This makes the existing debug statements unnecessary remaining
overhead. Drop them.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
On EPP only writes update the cached variable so that the min/max
performance controls don't need to be updated again.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
functions
The EPP tracing is done by the caller today, but this precludes the
information about whether the CPPC request has changed.
Move it into the update_perf and set_epp functions and include information
about whether the request has changed from the last one.
amd_pstate_update_perf() and amd_pstate_set_epp() now require the policy
as an argument instead of the cpudata.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
In order to prevent a potential write for shmem_update_perf()
cache the request into the cppc_req_cached variable normally only
used for the MSR case.
This adds symmetry into the code and potentially avoids extra writes.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Bitfield masks are easier to follow and less error prone.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
In amd_pstate_ut_check_freq() and amd_pstate_ut_check_perf() the cpudata
variable is only needed in the scope of the for loop. Move it there.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
If a CPU is missing a policy or one has been offlined then the unit test
is skipped for the rest of the CPUs on the system.
Instead; iterate online CPUs and skip any missing policies to allow
continuing to test the rest of them.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Enums are effectively used as a boolean and don't show
the return value of the failing call.
Instead of using enums switch to returning the actual return
code from the unit test.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Several Ryzen AI processors support the exact same value for lowest
nonlinear perf and lowest perf. Loosen up the unit tests to allow this
scenario.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Using a scoped cleanup macro simplifies cleanup code.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The `cppc_cap1_cached` variable isn't used at all, there is no
need to read it at initialization for each CPU.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
amd_pstate_cpu_boost_update() and refresh_frequency_limits() both
update the policy state and have nothing to do with the amd-pstate
driver itself.
A global "limits" lock doesn't make sense because each CPU can have
policies changed independently. Each time a CPU changes values they
will atomically be written to the per-CPU perf member. Drop per CPU
locking cases.
The remaining "global" driver lock is used to ensure that only one
entity can change driver modes at a given time.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
By storing perf values in a union all the writes and reads can
be done atomically, removing the need for some concurrency protections.
While making this change, also drop the cached frequency values,
using inline helpers to calculate them on demand from perf value.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Use the perf_to_freq helpers to calculate this on the fly.
As the members are no longer cached add an extra check into
amd_pstate_epp_update_limit() to avoid unnecessary calls in
amd_pstate_update_min_max_limit().
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
I came across a system that MSR_AMD_CPPC_CAP1 for some CPUs isn't
populated. This is an unexpected behavior that is most likely a
BIOS bug. In the event it happens I'd like users to report bugs
to properly root cause and get this fixed.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
During resume it's possible the firmware didn't restore the CPPC request
MSR but the kernel thinks the values line up. This leads to incorrect
performance after resume from suspend.
To fix the issue invalidate the cached value at suspend. During resume use
the saved values programmed as cached limits.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reported-by: Miroslav Pavleski <miroslav@pavleski.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The clamping in freq_to_perf() is broken right now, as we first typecast
(read wraparound) the overflowing value into a u8 and then clamp it down.
So, use a u32 to store the >255 value in certain edge cases and then clamp
it down into a u8.
Also, use a "explicit typecast + clamp" instead of just a "clamp_t" as the
latter typecasts first and then clamps between the limits, which defeats
our purpose.
Fixes: 620136ced35a ("cpufreq/amd-pstate: Modularize perf<->freq conversion")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250222033221.554976-1-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Optimize new cluster allocation by correctly find empty entry slot
- Add a check to prevent excessive bitmap clearing due to invalid
data size of file/dir entry
- Fix incorrect error return for zero-byte writes
* tag 'exfat-for-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: add a check for invalid data size
exfat: short-circuit zero-byte writes in exfat_file_write_iter
exfat: fix soft lockup in exfat_clear_bitmap
exfat: fix just enough dentries but allocate a new cluster to dir
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix spelling mistakes in idmappings.rst
- Fix RCU warnings in override_creds()/revert_creds()
- Create new pid namespaces with default limit now that pid_max is
namespaced
* tag 'vfs-6.14-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pid: Do not set pid_max in new pid namespaces
doc: correcting two prefix errors in idmappings.rst
cred: Fix RCU warnings in override/revert_creds
|
|
This was another case that Rasmus pointed out where the direct access to
the pipe head and tail pointers broke on 32-bit configurations due to
the type changes.
As with the pipe FIONREAD case, fix it by using the appropriate helper
functions that deal with the right pipe index sizing.
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Link: https://lore.kernel.org/all/878qpi5wz4.fsf@prevas.dk/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")Cc: Oleg >
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rasmus points out that we do indeed have other cases of breakage from
the type changes that were introduced on 32-bit targets in order to read
the pipe head and tail values atomically (commit 3d252160b818: "fs/pipe:
Read pipe->{head,tail} atomically outside pipe->mutex").
Fix it up by using the proper helper functions that now deal with the
pipe buffer index types properly. This makes the code simpler and more
obvious.
The compiler does the CSE and loop hoisting of the pipe ring size
masking that we used to do manually, so open-coding this was never a
good idea.
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Link: https://lore.kernel.org/all/87cyeu5zgk.fsf@prevas.dk/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
That's what 'pipe_full()' does, so it's more consistent. But more
importantly it gets the type limits right when the pipe head and tail
are no longer necessarily 'unsigned int'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move the v4l2_info() call displaying the video device name after the
device is actually registered.
This fixes a bug where the driver was always displaying "/dev/video0"
since it was reading from the vfd before it was registered.
Fixes: cf7f34777a5b ("media: vim2m: Register video device after setting up internals")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Majewski <mattwmajewski@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
vivid-osd depends on CONFIG_FB, which can be a large dependency. Introduce
CONFIG_VIDEO_VIVID_OSD to control enabling support for testing output
overlay.
Suggested-by: Slawomir Rosek <srosek@google.com>
Co-developed-by: Slawomir Rosek <srosek@google.com>
Signed-off-by: Slawomir Rosek <srosek@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: add newline to squash checkpatch warning]
|
|
Most references to fb_info are already within vivid-osd.c. This patch
moves the remaining references into vivid-osd.c.
We also take this opportunity to make the function names in vivid-osd
more consistent.
This is a preparation patch to make CONFIG_FB optional for vivid.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Move cached EDID that takes 512 bytes to the bottom of struct
snps_hdmirx_dev to improve CPU's cache locality of the struct.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
HDMI audio CODEC is unsupported in the current version of the driver.
Support may come later. Remove HDMI CODEC bits that were left out
by accident to keep code consistent.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Remove second v4l2-common.h header inclusion.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503061231.PHF6hEL2-lkp@intel.com/
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Depending on IOMMU_DMA is suspicious, since the low-level DMA ops
internals and MSI helpers is provides are not of interest to general
drivers. In practice it mostly seems to be serving as a dependency on
ARM64 here, so do that properly. The venus driver looks like it won't
actually be useful at runtime without the IOMMU API, so add that too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The datasheet recommends 55MHz frequency sampling, with a max of 69 MHz.
(Kudos to Kosta Stefanov for the calculations).
Replace z with a 32 bit uint, and make the range of the variable
explicit.
Found by cocci:
drivers/media/dvb-frontends/tda10048.c:345:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead.
Reviewed-by: Kosta Stefanov <costa.stephanoff@gmail.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add check for the return value of clk_enable() to gurantee the success.
Fixes: 002e8f0d5927 ("media: stm32-dma2d: STM32 DMA2D driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
This loop was recently converted to use for_each_of_graph_port() which
automatically does __cleanup__ on the "port" iterator variable. Delete
the calls to of_node_put(port) to avoid a double put bug.
Fixes: 393194cdf11e ("media: xilinx-tpg: use new of_graph functions")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The smsdvb_module_init() returns without checking the retval from
smscore_register_hotplug().
If the smscore_register_hotplug() failed, the module failed to install,
leaving the smsdvb_debugfs not unregistered.
Fixes: 3f6b87cff66b ("[media] siano: allow showing the complete statistics via debugfs")
Cc: stable@vger.kernel.org
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
An of_node_put(i2c_bus) call was immediately used after a pointer check
for an of_find_i2c_adapter_by_node() call in this function implementation.
Thus call such a function only once instead directly before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
An of_node_put(ep) call was immediately used after a return value check
for a v4l2_fwnode_endpoint_parse() call in this function implementation.
Thus call such a function only once instead directly before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
