| Age | Commit message (Collapse) | Author |
|---|
|
This device can be used in conjunction with audio-graph-card to provide
an endpoint for binding with the other side of the audio link.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250226100508.2352568-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a confusing difference in error handling between rpm_suspend()
and rpm_resume() related to the special way in which -EAGAIN and -EBUSY
error values are treated by the former. Also, converting -EACCES coming
from the callback to I/O error, which it quite likely is not, may
confuse runtime PM users.
To address the above, modify rpm_callback() to convert -EACCES coming
from the driver to -EAGAIN and to set power.runtime_error only if the
return value is not -EAGAIN or -EBUSY.
This will cause the error handling in rpm_resume() and rpm_suspend() to
work consistently, so drop the no longer needed -EAGAIN or -EBUSY
special case from the latter and make it retry autosuspend if
power.runtime_error is unset.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12620037.O9o76ZdvQC@rjwysocki.net
|
|
There is a spelling mistake in a seq_puts string. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250227224006.660164-1-colin.i.king@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In preparation for subsequent changes, move the power.completion
reinitialization along with clearing power.work_in_progress into a
separate function called dpm_clear_async_state() and rearrange
dpm_async_fn() to get rid of unnecessary indentation.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/8494650.T7Z3S40VBb@rjwysocki.net
|
|
There are two ways to set the output voltage of the LD05
regulator. First by writing to the voltage selection registers
and second by toggling the SD_VSEL signal.
Usually board designers connect SD_VSEL to the VSELECT signal
controlled by the USDHC controller, but in some cases the
signal is hardwired to a fixed low level (therefore selecting
3.3V as initial value for allowing to boot from the SD card).
In these cases, the voltage is only determined by the value
of the LDO5CTRL_L register. Introduce a property
nxp,sd-vsel-fixed-low to let the driver know that SD_VSEL
is low and there is no GPIO to actually get that
information from dynamically.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://patch.msgid.link/20250303132258.50204-1-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename the async_in_progress field in struct dev_pm_info to
work_in_progress as after subsequent changes it will mean work in
general rather than just async work.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3338693.aeNJFYEL58@rjwysocki.net
|
|
Modify pm_runtime_block_if_disabled() to return true when runtime PM
is disabled for the device, regardless of the power.last_status value.
This effectively prevents "smart suspend" from being enabled for
devices with runtime PM disabled in device_prepare(), even transiently,
so update the related comment in that function accordingly.
If a device has runtime PM disabled in device_prepare(), it is not
actually known whether or not runtime PM will be enabled for that
device going forward, so it is more appropriate to postpone the
"smart suspend" optimization for the device in the given system
suspend-resume cycle than to enable it and get confused going
forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/13718674.uLZWGnKmhe@rjwysocki.net
|
|
The comment in pm_runtime_blocked() is acutally wrong: power.last_status
is not a bit field. Its data type is an enum and so one can reasonably
assume that partial updates of it will not be observed.
Accordingly, pm_runtime_blocked() can be converted to a static inline
function and the related locking overhead can be eliminated, so long
as it is only used in system suspend/resume code paths because
power.last_status is not expected to be updated concurrently while
that code is running.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/1923449.tdWV9SEqCh@rjwysocki.net
|
|
Put the update of the power.smart_suspend device flag under the PM
spinlock of the device in case multiple bit fields in struct dev_pm_info
occupy one memory location which needs to be updated via RMW every time
any of these bit fields is updated.
The lock in question is already held around the power.direct_complete
flag update in device_prepare() for the same reason, so this change does
not add locking-related overhead to the code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2368159.ElGaqSPkdT@rjwysocki.net
|
|
The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.
Fixes: 107d47b2b95e ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net
|
|
Commit 4204eccc7b2a ("ASoC: tegra: Add support for S24_LE audio format")
added support for the S24_LE audio format, but duplicated S16_LE in
OUT_DAI() for ADX instead.
Fix this by adding support for the S24_LE audio format.
Compile-tested only.
Cc: stable@vger.kernel.org
Fixes: 4204eccc7b2a ("ASoC: tegra: Add support for S24_LE audio format")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250222225700.539673-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Temperatures are reported in units of Celsius however hwmon expects
values to be in millidegree of Celsius. Userspace tools observe values
close to zero and report it as "Not available" or incorrect values like
0C or 1C. Add a simple conversion to fix that.
Before the change:
wsa884x-virtual-0
Adapter: Virtual device
temp1: +0.0°C
--
wsa884x-virtual-0
Adapter: Virtual device
temp1: +0.0°C
Also reported as N/A before first amplifier power on.
After this change and initial wsa884x power on:
wsa884x-virtual-0
Adapter: Virtual device
temp1: +39.0°C
--
wsa884x-virtual-0
Adapter: Virtual device
temp1: +37.0°C
Tested on sm8550 only.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20250221044024.1207921-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
create_sdw_dailinks()
Initialize current_be_id to 0 to handle the unlikely case when there are
no devices connected to a DAI.
In this case create_sdw_dailink() would return without touching the passed
pointer to current_be_id.
Found by gcc -fanalyzer
Fixes: 59bf457d8055 ("ASoC: intel: sof_sdw: Factor out SoundWire DAI creation")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250303065552.78328-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver implements support for the SPI-NAND mode of QCOM NAND Flash
Interface as a SPI-MEM controller with pipelined ECC capability.
Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20250224111414.2809669-3-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the QPIC-SPI-NAND flash controller present in the IPQ SoCs.
It can work both in serial and parallel mode and supports typical
SPI-NAND page cache operations.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20250224111414.2809669-2-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add STM32 OSPI driver, it supports :
- support sNOR / sNAND devices.
- Three functional modes: indirect, automatic-status polling,
memory-mapped.
- Single-, dual-, quad-, and octal-SPI communication.
- Dual-quad communication.
- Single data rate (SDR).
- DMA channel for indirect mode.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20250219080059.367045-3-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add device tree bindings for the STM32 OSPI controller.
Main features of the Octo-SPI controller :
- support sNOR / sNAND / HyperRAM™ and HyperFlash™ devices.
- Three functional modes: indirect, automatic-status polling,
memory-mapped.
- Up to 4 Gbytes of external memory can be addressed in indirect
mode (per physical port and per CS), and up to 256 Mbytes in
memory-mapped mode (combined for both physical ports and per CS).
- Single-, dual-, quad-, and octal-SPI communication.
- Dual-quad communication.
- Single data rate (SDR) and double transfer rate (DTR).
- Maximum target frequency is 133 MHz for SDR and 133 MHz for DTR.
- Data strobe support.
- DMA channel for indirect mode.
- Double CS mapping that allows two external flash devices to be
addressed with a single OCTOSPI controller mapped on a single
OCTOSPI port.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250219080059.367045-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Read temperature of the amplifier and expose it via hwmon interface, which
will be later used during calibration of speaker protection algorithms.
The method is the same as for wsa884x and therefore this is based on
Krzysztof Kozlowski's approach implemented in commit 6b99dc62d940 ("ASoC:
codecs: wsa884x: Implement temperature reading and hwmon").
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Link: https://patch.msgid.link/20250221032141.1206902-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove the unnecessary bool conversion and simplify the code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250223202547.1795-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
audio-graph-card2-custom-sample has many sample connections, but because
ALSA card has number limition for links, it is impossible to have all
samples into 1 ASoC card.
The sample is separated into 2 samples. Remove original sample.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87tt8s9hpp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
audio-graph-card2-custom-sample has many sample connections, but because
ALSA card has number limition for links, it is impossible to have all
samples into 1 ASoC card.
Separate it and took DPCM / Codec2Codec connection part.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7t89hpt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
audio-graph-card2-custom-sample has many sample connections, but because
ALSA card has number limition for links, it is impossible to have all
samples into 1 ASoC card.
Separate it and took the normal connection part.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87wmdo9hq0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No drivers are using SND_SOC_DAIFMT_CB{MS}_CF{MS}.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875xkx8owm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877c5d8ows.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/878qpt8owv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a5a98owz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87bjup8ox3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cyf58ox6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87eczl8oxa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87frk18oxe.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h64h8oxh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ikox8oxk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jz9d8oxo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldtt8oxs.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87mse98oxv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6yp8oxy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plj58oy2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87r03l8oy8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87seo18oyd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87tt8h8oyh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7sx8oyl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87wmdd8oyp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87y0xt8oyt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfi98oyx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/871pvla3jg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/8734g1a3jj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/874j0ha3jn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875xkxa3jq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877c5da3jt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/878qpta3jx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
