summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-16spi: rspi: Fixes bogus received byte in qspi_transfer_in()DongCV
In qspi_transfer_in(), when receiving the last n (or len) bytes of data, one bogus byte was written in the receive buffer. This code leads to a buffer overflow. "jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x03b40000: 0x1900 instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x03b40004: 0x000c instead" The error message above happens when trying to mount, unmount, and remount a jffs2-formatted device. This patch removed the bogus write to fixes: 3be09bec42a800d4 "spi: rspi: supports 32bytes buffer for DUAL and QUAD" And here is Geert's comment: "spi: rspi: Fix bogus received byte in qspi_transfer_in() When there are less than QSPI_BUFFER_SIZE remaining bytes to be received, qspi_transfer_in() writes one bogus byte in the receive buffer, possibly leading to a buffer overflow. This can be reproduced by mounting, unmounting, and remounting a jffs2-formatted device, causing lots of warnings like: "jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x03b40000: 0x1900 instead" Remove the bogus write to fix this. " Signed-off-by: DongCV <cv-dong@jinso.co.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16Merge tag 'media/v4.10-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: "A regression fix that makes the Siano driver to work again after the CONFIG_VMAP_STACK change" * tag 'media/v4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] siano: make it work again with CONFIG_VMAP_STACK
2017-02-16regulator: core: Resolve supplies before disabling unused regulatorsJavier Martinez Canillas
After commit 66d228a2bf03 ("regulator: core: Don't use regulators as supplies until the parent is bound"), input supplies aren't resolved if the input supplies parent device has not been bound. This prevent regulators to hold an invalid reference if its supply parent device driver probe is deferred. But this causes issues on some boards where a PMIC's regulator use as input supply a regulator from another PMIC whose driver is registered after the driver for the former. In this case the regulators for the first PMIC will fail to resolve input supplies on regulators registration (since the other PMIC wasn't probed yet). And when the core attempts to resolve again latter when the other PMIC registers its own regulators, it will fail again since the parent device isn't bound yet. This will cause some parent supplies to never be resolved and wrongly be disabled on boot due taking them as unused. To solve this problem, also attempt to resolve the pending regulators input supplies before disabling the unused regulators. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16dm cache metadata: use cursor api in blocks_are_clean_separate_dirty()Mike Snitzer
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-16dm persistent data: add cursor skip functions to the cursor APIsJoe Thornber
Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-16dm cache metadata: use dm_bitset_new() to create the dirty bitset in format 2Joe Thornber
Big speed up with large configs. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-16dm bitset: add dm_bitset_new()Joe Thornber
A more efficient way of creating a populated bitset. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-16dm cache metadata: name the cache block that couldn't be loadedMike Snitzer
Improves __load_mapping_v1() and __load_mapping_v2() DMERR messages to explicitly name the cache block number whose mapping couldn't be loaded. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-16dm cache metadata: add "metadata2" featureJoe Thornber
If "metadata2" is provided as a table argument when creating/loading a cache target a more compact metadata format, with separate dirty bits, is used. "metadata2" improves speed of shutting down a cache target. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-16dm cache metadata: use bitset cursor api to load discard bitsetJoe Thornber
Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-16dm bitset: introduce cursor apiJoe Thornber
Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-16dm btree: use GFP_NOFS in dm_btree_del()Joe Thornber
dm_btree_del() is called from an ioctl so don't recurse into FS. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-16dm space map common: memcpy the disk root to ensure it's arch alignedJoe Thornber
The metadata_space_map_root passed to sm_ll_open_metadata() may or may not be arch aligned, use memcpy to ensure it is. This is not a fast path so the extra memcpy doesn't hurt us. Long-term it'd be better to use the kernel's alignment infrastructure to remove the memcpy()s that are littered across persistent-data (btree, array, space-maps, etc). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-16dm block manager: add unlikely() annotations on dm_bufio error pathsJoe Thornber
Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-16dm cache: fix corruption seen when using cache > 2TBJoe Thornber
A rounding bug due to compiler generated temporary being 32bit was found in remap_to_cache(). A localized cast in remap_to_cache() fixes the corruption but this preferred fix (changing from uint32_t to sector_t) eliminates potential for future rounding errors elsewhere. Cc: stable@vger.kernel.org Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-16vfs: fix uninitialized flags in splice_to_pipe()Miklos Szeredi
Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the unused part of the pipe ring buffer. Previously splice_to_pipe() left the flags value alone, which could result in incorrect behavior. Uninitialized flags appears to have been there from the introduction of the splice syscall. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # 2.6.17+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "Fix a use after free bug introduced in 4.2 and using an uninitialized value introduced in 4.9" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix uninitialized flags in pipe_buffer fuse: fix use after free issue in fuse_dev_do_read()
2017-02-16Merge tag 'pci-v4.10-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Add back pcie_pme_remove() so we free the IRQ when removing PCIe port devices; previously the leaked IRQ caused an MSI BUG_ON" * tag 'pci-v4.10-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PME: Restore pcie_pme_driver.remove
2017-02-16Bluetooth: fix spelling mistake: "advetising" -> "advertising"Colin Ian King
trivial fix to spelling mistake in BT_ERR_RATELIMITED error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btmrvl: fix spelling mistake: "caibration" -> "calibration"Colin Ian King
trivial fix to spelling mistake in BT_ERR error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) In order to avoid problems in the future, make cgroup bpf overriding explicit using BPF_F_ALLOW_OVERRIDE. From Alexei Staovoitov. 2) LLC sets skb->sk without proper skb->destructor and this explodes, fix from Eric Dumazet. 3) Make sure when we have an ipv4 mapped source address, the destination is either also an ipv4 mapped address or ipv6_addr_any(). Fix from Jonathan T. Leighton. 4) Avoid packet loss in fec driver by programming the multicast filter more intelligently. From Rui Sousa. 5) Handle multiple threads invoking fanout_add(), fix from Eric Dumazet. 6) Since we can invoke the TCP input path in process context, without BH being disabled, we have to accomodate that in the locking of the TCP probe. Also from Eric Dumazet. 7) Fix erroneous emission of NETEVENT_DELAY_PROBE_TIME_UPDATE when we aren't even updating that sysctl value. From Marcus Huewe. 8) Fix endian bugs in ibmvnic driver, from Thomas Falcon. [ This is the second version of the pull that reverts the nested rhashtable changes that looked a bit too scary for this late in the release - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) rhashtable: Revert nested table changes. ibmvnic: Fix endian errors in error reporting output ibmvnic: Fix endian error when requesting device capabilities net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notification net: xilinx_emaclite: fix freezes due to unordered I/O net: xilinx_emaclite: fix receive buffer overflow bpf: kernel header files need to be copied into the tools directory tcp: tcp_probe: use spin_lock_bh() uapi: fix linux/if_pppol2tp.h userspace compilation errors packet: fix races in fanout_add() ibmvnic: Fix initial MTU settings net: ethernet: ti: cpsw: fix cpsw assignment in resume kcm: fix a null pointer dereference in kcm_sendmsg() net: fec: fix multicast filtering hardware setup ipv6: Handle IPv4-mapped src to in6addr_any dst. ipv6: Inhibit IPv4-mapped src address on the wire. net/mlx5e: Disable preemption when doing TC statistics upcall rhashtable: Add nested tables tipc: Fix tipc_sk_reinit race conditions gfs2: Use rhashtable walk interface in glock_hash_walk ...
2017-02-16Bluetooth: btqcomsmd: Allow driver to build if COMPILE_TEST is enabledJavier Martinez Canillas
The driver only has runtime but no build time dependency with QCOM_SMD && QCOM_WCNSS_CTRL. So it can be built for testing purposes if COMPILE_TEST option is enabled. This is useful to have more build coverage and make sure that the driver is not affected by changes that could cause build regressions. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: Add another AR3012 04ca:3018 deviceDmitry Tunin
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3018 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2017-02-16Bluetooth: hci_bcm: Add support for BCM2E95 and BCM2E96Daniel Drake
The BCM2E96 ID is used by the ECS EF20 laptop, and BCM2E95 is present in the Weibu F3C. Both are now logged as: hci0: BCM: chip id 82 hci0: BCM43341B0 (002.001.014) build 0000 hci0: BCM (002.001.014) build 0158 The ECS vendor kernel predates the host-wakeup support in hci_bcm but it explicitly has a comment saying that the GPIO assignment needs to be reordered for BCM2E96: 1. (not used in vendor driver) 2. Device wakeup 3. Shutdown For both devices in question, the DSDT has these GPIOs listed in order of GpioInt, GpioIo, GpioIo. And if we use the first one listed (GpioInt) as the host wakeup, that interrupt handler fires while doing bluetooth I/O. I am assuming the convention of GPIO ordering has been changed for these new device IDs, so lets use the new ordering on such devices. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btbcm: Add a delay for module resetWen-chien Jesse Sung
Some btbcm devices require more time to complete its reset process. They won't reply any hci command until reset is done. [ 17.218554] Bluetooth: hci0 command 0x1001 tx timeout [ 25.214999] Bluetooth: hci0: BCM: Reading local version info failed (-110) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: Add support for 413c:8143Wen-chien Jesse Sung
This is a Boardcom module and requires patchram to work. T: Bus=01 Lev=03 Prnt=03 Port=01 Cnt=02 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8143 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=20689D1FAF94 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16btmrvl: use dt's irqflags for wakeup pinJeffy Chen
Use irqflags parsed from dt. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16btmrvl: set irq_bt to -1 when failed to parse itJeffy Chen
The irq_of_parse_and_map will return 0 as a invalid irq. Set irq_bt to -1 in this case, so that the btmrvl resume/suspend code would not try to enable/disable it. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16btmrvl: avoid double-disable_irq() raceJeffy Chen
It's much the same as what we did for mwifiex in: b9da4d2 mwifiex: avoid double-disable_irq() race "We have a race where the wakeup IRQ might be in flight while we're calling mwifiex_disable_wake() from resume(). This can leave us disabling the IRQ twice. Let's disable the IRQ and enable it in case if we have double-disabled it." Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: Fix NULL pointer dereference in bt_sock_recvmsgEzequiel Garcia
As per the comment in include/linux/net.h, the recvfrom handlers should expect msg_name to be NULL. However, bt_sock_recvmsg() is currently not checking it, which could lead to a NULL pointer dereference. The following NULL pointer dereference was produced while testing L2CAP datagram reception. Note that the kernel is tainted due to the r8723bs module being inserted. However, it seems the fix still applies. $ l2test -r -G l2test[326]: Receiving ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ee008000 [00000000] *pgd=7f896835 Internal error: Oops: 817 [#1] PREEMPT SMP ARM Modules linked in: r8723bs(O) CPU: 0 PID: 326 Comm: l2test Tainted: G O 4.8.0 #1 Hardware name: Allwinner sun7i (A20) Family task: ef1c6880 task.stack: eea70000 PC is at __memzero+0x58/0x80 LR is at l2cap_skb_msg_name+0x1c/0x4c pc : [<c02c47d8>] lr : [<c0506278>] psr: 00070013 sp : eea71e60 ip : 00000000 fp : 00034e1c r10: 00000000 r9 : 00000000 r8 : eea71ed4 r7 : 000002a0 r6 : eea71ed8 r5 : 00000000 r4 : ee4a5d80 r3 : 00000000 r2 : 00000000 r1 : 0000000e r0 : 00000000 Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 7600806a DAC: 00000051 Process l2test (pid: 326, stack limit = 0xeea70210) Stack: (0xeea71e60 to 0xeea72000) 1e60: ee4a5d80 eeac2800 000002a0 c04d7114 173eefa0 00000000 c06ca68e 00000000 1e80: 00000001 eeac2800 eef23500 00000000 000002a0 eea71ed4 eea70000 c0504d50 1ea0: 00000000 00000000 eef23500 00000000 00000000 c044e8a0 eea71edc eea9f904 1ec0: bef89aa0 fffffff7 00000000 00035008 000002a0 00000000 00000000 00000000 1ee0: 00000000 00000000 eea71ed4 00000000 00000000 00000000 00004000 00000000 1f00: 0000011b c01078c4 eea70000 c044e5e4 00000000 00000000 642f0001 6c2f7665 1f20: 0000676f 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f40: 00000000 00000000 00000000 00000000 00000000 ffffffff 00000001 bef89ad8 1f60: 000000a8 c01078c4 eea70000 00000000 00034e1c c01e6c74 00000000 00000000 1f80: 00034e1c 000341f8 00000000 00000123 c01078c4 c044e90c 00000000 00000000 1fa0: 000002a0 c0107700 00034e1c 000341f8 00000003 00035008 000002a0 00000000 1fc0: 00034e1c 000341f8 00000000 00000123 00000000 00000000 00011ffc 00034e1c 1fe0: 00000000 bef89aa4 0001211c b6eebb60 60070010 00000003 00000000 00000000 [<c02c47d8>] (__memzero) from [<c0506278>] (l2cap_skb_msg_name+0x1c/0x4c) [<c0506278>] (l2cap_skb_msg_name) from [<c04d7114>] (bt_sock_recvmsg+0x128/0x160) [<c04d7114>] (bt_sock_recvmsg) from [<c0504d50>] (l2cap_sock_recvmsg+0x98/0x134) [<c0504d50>] (l2cap_sock_recvmsg) from [<c044e8a0>] (SyS_recvfrom+0x94/0xec) [<c044e8a0>] (SyS_recvfrom) from [<c044e90c>] (SyS_recv+0x14/0x1c) [<c044e90c>] (SyS_recv) from [<c0107700>] (ret_fast_syscall+0x0/0x3c) Code: e3110010 18a0500c e49de004 e3110008 (18a0000c) ---[ end trace 224e35e79fe06b42 ]--- Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: Configure Marvell to use one of the pins for oob wakeupRajat Jain
The Marvell devices may have many gpio pins, and hence for wakeup on these out-of-band pins, the chip needs to be told which pin is to be used for wakeup, using an hci command. Thus, we read the pin number etc from the device tree node and send a command to the chip. Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: Add out-of-band wakeup supportRajat Jain
Some onboard BT chips (e.g. Marvell 8997) contain a wakeup pin that can be connected to a gpio on the CPU side, and can be used to wakeup the host out-of-band. This can be useful in situations where the in-band wakeup is not possible or not preferable (e.g. the in-band wakeup may require the USB host controller to remain active, and hence consuming more system power during system sleep). The oob gpio interrupt to be used for wakeup on the CPU side, is read from the device tree node, (using standard interrupt descriptors). A devcie tree binding document is also added for the driver. The compatible string is in compliance with Documentation/devicetree/bindings/usb/usb-device.txt Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: Use an error label for error pathsRajat Jain
Use a label to remove the repetetive cleanup, for error cases. Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btqcomsmd: Fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/bluetooth/btqcomsmd.ko | grep alias $ After this patch: $ modinfo drivers/bluetooth/btqcomsmd.ko | grep alias alias: of:N*T*Cqcom,wcnss-btC* alias: of:N*T*Cqcom,wcnss-bt Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: add support for 0bb4:0306Christoph Haag
It's a custom USB ID for the broadcom bt adapter in the HTC Vive. T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bb4 ProdID=0306 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM2045A0 S: SerialNumber=AC3743E110CE C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) dmesg: Bluetooth: hci0: BCM: chip id 102 Bluetooth: hci0: c-l Bluetooth: hci0: BCM (001.001.005) build 0000 Bluetooth: hci0: BCM (001.001.005) build 0481 Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU Signed-off-by: Christoph Haag <haagch@frickel.club> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursorMichel Dänzer
The crtc_h/vdisplay fields may not match the CRTC viewport dimensions with special modes such as interlaced ones. Fixes the HW cursor disappearing in the bottom half of the screen with interlaced modes. Fixes: 6b16cf7785a4 ("drm/radeon: Hide the HW cursor while it's out of bounds") Cc: stable@vger.kernel.org Reported-by: Ashutosh Kumar <ashutosh.kumar@amd.com> Tested-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-02-16ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()Kees Cook
The 64-bit get_user() wasn't clearing the high word due to a typo in the error handler. The exception handler entry was already correct, though. Noticed during recent usercopy test additions in lib/test_user_copy.c. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-02-16ARM: 8657/1: uaccess: consistently check object sizesKees Cook
In commit 76624175dcae ("arm64: uaccess: consistently check object sizes"), the object size checks are moved outside the access_ok() so that bad destinations are detected before hitting the "memset(dest, 0, size)" in the copy_from_user() failure path. This makes the same change for arm, with attention given to possibly extracting the uaccess routines into a common header file for all architectures in the future. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-02-16cfq-iosched: don't call wbt_disable_default() with IRQs disabledJens Axboe
wbt_disable_default() calls del_timer_sync() to wait for the wbt timer to finish before disabling throttling. We can't do this with IRQs disable. This fixes a lockdep splat on boot, if non-root cgroups are used. Reported-by: Gabriel C <nix.or.die@gmail.com> Fixes: 87760e5eef35 ("block: hook up writeback throttling") Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-16hwmon: (sht15) Add device tree supportMarco Franchi
Allow the driver to work with device tree support. Based on initial patch submission from Peter Fox. Tested on a imx7d-sdb board connected to a SHT15 board via Mikro Bus. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-16EDAC, mce_amd: Print IPID and Syndrome on a separate lineYazen Ghannam
Currently, the IPID and Syndrome are printed on the same line as the Address. There are cases when we can have a valid Syndrome but not a valid Address. For example, the MCA_SYND register can be used to hold more detailed error info that the hardware folks can use. It's not just DRAM ECC syndromes. There are some error types that aren't related to memory that may have valid syndromes, like some errors related to links in the Data Fabric, etc. In these cases, the IPID and Syndrome are not printed at the same log level as the rest of the stanza, so users won't see them on the console. Console: [Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b [Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2 Dmesg: [Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b , Syndrome: 0x000000010b404000, IPID: 0x0001002e00000002 [Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2 Print the IPID first and on a new line. The IPID should always be printed on SMCA systems. The Syndrome will then be printed with the IPID and at the same log level when valid: [Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b [Hardware Error]: IPID: 0x0001002e00000002, Syndrome: 0x000000010b404000 [Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2 Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1487192182-2474-1-git-send-email-Yazen.Ghannam@amd.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-02-16genirq: Clarify logic calculating bogus irqreturn_t valuesJeremy Kerr
Although irqreturn_t is an enum, we treat it (and its enumeration constants) as a bitmask. However, bad_action_ret() uses a less-than operator to determine whether an irqreturn_t falls within allowable bit values, which means we need to know the signededness of an enum type to read the logic, which is implementation-dependent. This change explicitly uses an unsigned type for the comparison. We do this instead of changing to a bitwise test, as the latter compiles to increased instructions in this hot path. It looks like we get the correct behaviour currently (bad_action_ret(-1) returns 1), so this is purely a readability fix. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Link: http://lkml.kernel.org/r/1487219049-4061-1-git-send-email-jk@ozlabs.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-16genirq/msi: Add stubs for get_cached_msi_msg/pci_write_msi_msgArnd Bergmann
A bug fix to the MSIx handling in vfio added references to functions that may not be defined if MSI is disabled in the kernel, resulting in this link error: drivers/built-in.o: In function `vfio_msi_set_vector_signal': :(.text+0x450808): undefined reference to `get_cached_msi_msg' :(.text+0x45080c): undefined reference to `write_msi_msg' As suggested by Alex Williamson, add stub implementations for get_cached_msi_msg() and pci_write_msi_msg(). In case this bugfix gets backported, please note that the #ifdef has changed over time, originally both functions were implemented in drivers/pci/msi.c and controlled by CONFIG_PCI_MSI, while nowadays get_cached_msi_msg() is part of the generic MSI support and can be used without PCI. Fixes: b8f02af096b1 ("vfio/pci: Restore MSIx message prior to enabling") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Link: http://lkml.kernel.org/r/1413190208.4202.34.camel@ul30vt.home Link: http://lkml.kernel.org/r/20170214215343.3307861-1-arnd@arndb.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-16x86/cpufeature: Move RING3MWAIT feature to avoid conflictsThomas Gleixner
The original feature bit is used in a different branch already. Move it to scattered bits. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-16fuse: fix uninitialized flags in pipe_bufferMiklos Szeredi
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: d82718e348fe ("fuse_dev_splice_read(): switch to add_to_pipe()") Cc: <stable@vger.kernel.org> # 4.9+
2017-02-16regulator: Fix regulator_summary for deviceless consumersLeonard Crestez
It is allowed to call regulator_get with a NULL dev argument (_regulator_get explicitly checks for it) but this causes an error later when printing /sys/kernel/debug/regulator_summary. Fix this by explicitly handling "deviceless" consumers in the debugfs code. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2017-02-16ixgbe: Don't bother clearing buffer memory for descriptor ringsAlexander Duyck
This patch makes it so that we don't need to bother with clearing the memory out for the descriptor rings. The general idea is to only free buffers associated with buffers in use which are located between the next_to_clean and next_to_use or next_to_alloc values. Everything outside of those regions can be safely ignored since they should have no buffers associated with them. The advantage to doing things this way is that is should speed up bring-up and tear-down of the rings. Specifically we can avoid the 512 or more cycles required to memset the rings in tear-down. In the bring-up phase we then clear the memory as a part of initialization. The general idea is that the clearing in initialization can act as a prefetch of sorts for the buffer info structures so they are in the local CPU when we go to populate them. This should help to improve overall time needed to perform a suspend/resume. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Add support for build_skbAlexander Duyck
This patch adds build_skb support to the Rx path. There are several advantages to this change. 1. It avoids the memcpy and skb->head allocation for small packets which improves performance by about 5% in my tests. 2. It avoids the memcpy, skb->head allocation, and eth_get_headlen for larger packets improving performance by about 10% in my tests. 3. For VXLAN packets it allows the full header to be in skb->data which improves the performance by as much as 30% in some of my tests. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Add private flag to control buffer modeAlexander Duyck
Since there are potential drawbacks to the new Rx allocation approach I thought it best to add a "chicken bit" so that we can turn the feature off if in the event that a problem is found. It also provides a means of validating the legacy Rx path in the event that we are forced to fall back. At some point in the future when we are convinced we don't need it anymore we might be able to drop the legacy-rx flag. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Add support for padding packetAlexander Duyck
This patch adds support for providing a buffer with headroom and tailroom to allow for shared info, NET_SKB_PAD, and NET_IP_ALIGN. With this combined with the DMA changes we can start using build_skb to build frames around an incoming Rx buffer instead of having to memcpy the headers. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 07:34:11 +0000