summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-15mlx4: do not use rwlock in fast pathEric Dumazet
Using a reader-writer lock in fast path is silly, when we can instead use RCU or a seqlock. For mlx4 hwstamp clock, a seqlock is the way to go, removing two atomic operations and false sharing. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15block: do not allow updates through sysfs until registration completesTahsin Erdogan
When a new disk shows up, sysfs queue directory is created before elevator is registered. This allows a user to attempt a scheduler switch even though the initial registration hasn't completed yet. In one scenario, blk_register_queue() calls elv_register_queue() and right before cfq_registered_queue() is called, another process executes elevator_switch() and replaces q->elevator with deadline scheduler. When cfq_registered_queue() executes it interprets e->elevator_data as struct cfq_data even though it is actually struct deadline_data. Grab q->sysfs_lock in blk_register_queue() to synchronize with sysfs callers. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-15PCI/PME: Restore pcie_pme_driver.removeYinghai Lu
In addition to making PME non-modular, d7def2040077 ("PCI/PME: Make explicitly non-modular") removed the pcie_pme_driver .remove() method, pcie_pme_remove(). pcie_pme_remove() freed the PME IRQ that was requested in pci_pme_probe(). The fact that we don't free the IRQ after d7def2040077 causes the following crash when removing a PCIe port device via /sys: ------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:370! invalid opcode: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 14509 Comm: sh Tainted: G W 4.8.0-rc1-yh-00012-gd29438d RIP: 0010:[<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190 ... Call Trace: [<ffffffff9758cda4>] pci_disable_msi+0x34/0x40 [<ffffffff97583817>] cleanup_service_irqs+0x27/0x30 [<ffffffff97583e9a>] pcie_port_device_remove+0x2a/0x40 [<ffffffff97584250>] pcie_portdrv_remove+0x40/0x50 [<ffffffff97576d7b>] pci_device_remove+0x4b/0xc0 [<ffffffff9785ebe6>] __device_release_driver+0xb6/0x150 [<ffffffff9785eca5>] device_release_driver+0x25/0x40 [<ffffffff975702e4>] pci_stop_bus_device+0x74/0xa0 [<ffffffff975704ea>] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [<ffffffff97578810>] remove_store+0x50/0x70 [<ffffffff9785a378>] dev_attr_store+0x18/0x30 [<ffffffff97260b64>] sysfs_kf_write+0x44/0x60 [<ffffffff9725feae>] kernfs_fop_write+0x10e/0x190 [<ffffffff971e13f8>] __vfs_write+0x28/0x110 [<ffffffff970b0fa4>] ? percpu_down_read+0x44/0x80 [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0 [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0 [<ffffffff971e1f04>] vfs_write+0xc4/0x180 [<ffffffff971e3089>] SyS_write+0x49/0xa0 [<ffffffff97001a46>] do_syscall_64+0xa6/0x1b0 [<ffffffff9819201e>] entry_SYSCALL64_slow_path+0x25/0x25 ... RIP [<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190 RSP <ffff89ad3085bc48> ---[ end trace f4505e1dac5b95d3 ]--- Segmentation fault Restore pcie_pme_remove(). [bhelgaas: changelog] Fixes: d7def2040077 ("PCI/PME: Make explicitly non-modular") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v4.9+
2017-02-15lightnvm: set default lun range when no luns are specifiedMatias Bjørling
The create target ioctl takes a lun begin and lun end parameter, which defines the range of luns to initialize a target with. If the user does not set the parameters, it default to only using lun 0. Instead, defaults to use all luns in the OCSSD, as it is the usual behaviour users want. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-15lightnvm: fix off-by-one error on target initializationMatias Bjørling
If one specifies the end lun id to be the absolute number of luns, without taking zero indexing into account, the lightnvm core will pass the off-by-one end lun id to target creation, which then panics during nvm_ioctl_dev_create. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-15perf tools: Add missing parse_events_error() prototypeArnaldo Carvalho de Melo
As pointed out by clang, we were not providing a prototype for a function before using it: util/parse-events.y:699:6: error: conflicting types for 'parse_events_error' void parse_events_error(YYLTYPE *loc, void *data, ^ /tmp/build/perf/util/parse-events-bison.c:2224:7: note: previous implicit declaration is here yyerror (&yylloc, _data, scanner, YY_("syntax error")); ^ /tmp/build/perf/util/parse-events-bison.c:65:25: note: expanded from macro 'yyerror' #define yyerror parse_events_error 1 error generated. One line fix it. Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170215130605.GC4020@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-15Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.11. Major changes: ath10k * when trying older firmware versions don't confuse user with error messages ath9k * fix crash in AP mode (regression) * fix relayfs crash (regression) * fix initialisation with AR9340 and AR9550
2017-02-15perf pmu: Fix check for unset alias->unit arrayArnaldo Carvalho de Melo
The alias->unit field is an array, so to check that it is not set we should see if it is an empty string, i.e. alias->unit[0], instead of checking alias->unit != NULL, as this will _always_ evaluate to 'true'. Pointed out by clang. Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170214182435.GD4458@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-15arm64/kprobes: consistently handle MRS/MSR with XZRMark Rutland
Now that we have XZR-safe helpers for fiddling with registers, use these in the arm64 kprobes code rather than open-coding the logic. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-15arm64: cpufeature: correctly handle MRS to XZRMark Rutland
In emulate_mrs() we may erroneously write back to the user SP rather than XZR if we trap an MRS instruction where Xt == 31. Use the new pt_regs_write_reg() helper to handle this correctly. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Fixes: 77c97b4ee21290f5 ("arm64: cpufeature: Expose CPUID registers by emulation") Cc: Andre Przywara <andre.przywara@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-15arm64: traps: correctly handle MRS/MSR with XZRMark Rutland
Currently we hand-roll XZR-safe register handling in user_cache_maint_handler(), though we forget to do the same in ctr_read_handler(), and may erroneously write back to the user SP rather than XZR. Use the new helpers to handle these cases correctly and consistently. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Fixes: 116c81f427ff6c53 ("arm64: Work around systems with mismatched cache line sizes") Cc: Andre Przywara <andre.przywara@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-15arm64: ptrace: add XZR-safe regs accessorsMark Rutland
In A64, XZR and the SP share the same encoding (31), and whether an instruction accesses XZR or SP for a particular register parameter depends on the definition of the instruction. We store the SP in pt_regs::regs[31], and thus when emulating instructions, we must be careful to not erroneously read from or write back to the saved SP. Unfortunately, we often fail to be this careful. In all cases, instructions using a transfer register parameter Xt use this to refer to XZR rather than SP. This patch adds helpers so that we can more easily and consistently handle these cases. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-15arm64: include asm/assembler.h in entry-ftrace.SArnd Bergmann
In a randconfig build I ran into this build error: arch/arm64/kernel/entry-ftrace.S: Assembler messages: arch/arm64/kernel/entry-ftrace.S:101: Error: unknown mnemonic `ldr_l' -- `ldr_l x2,ftrace_trace_function' The macro is defined in asm/assembler.h, so we should include that file. Fixes: 829d2bd13392 ("arm64: entry-ftrace.S: avoid open-coded {adr,ldr}_l") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-15arm64: fix warning about swapper_pg_dir overflowArnd Bergmann
With 4 levels of 16KB pages, we get this warning about the fact that we are copying a whole page into an array that is declared as having only two pointers for the top level of the page table: arch/arm64/mm/mmu.c: In function 'paging_init': arch/arm64/mm/mmu.c:528:2: error: 'memcpy' writing 16384 bytes into a region of size 16 overflows the destination [-Werror=stringop-overflow=] This is harmless since we actually reserve a whole page in the definition of the array that comes from, and just the extern declaration is short. The pgdir is initialized to zero either way, so copying the actual entries here seems like the best solution. Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-15timekeeping: Use deferred printk() in debug codeSergey Senozhatsky
We cannot do printk() from tk_debug_account_sleep_time(), because tk_debug_account_sleep_time() is called under tk_core seq lock. The reason why printk() is unsafe there is that console_sem may invoke scheduler (up()->wake_up_process()->activate_task()), which, in turn, can return back to timekeeping code, for instance, via get_time()->ktime_get(), deadlocking the system on tk_core seq lock. [ 48.950592] ====================================================== [ 48.950622] [ INFO: possible circular locking dependency detected ] [ 48.950622] 4.10.0-rc7-next-20170213+ #101 Not tainted [ 48.950622] ------------------------------------------------------- [ 48.950622] kworker/0:0/3 is trying to acquire lock: [ 48.950653] (tk_core){----..}, at: [<c01cc624>] retrigger_next_event+0x4c/0x90 [ 48.950683] but task is already holding lock: [ 48.950683] (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90 [ 48.950714] which lock already depends on the new lock. [ 48.950714] the existing dependency chain (in reverse order) is: [ 48.950714] -> #5 (hrtimer_bases.lock){-.-...}: [ 48.950744] _raw_spin_lock_irqsave+0x50/0x64 [ 48.950775] lock_hrtimer_base+0x28/0x58 [ 48.950775] hrtimer_start_range_ns+0x20/0x5c8 [ 48.950775] __enqueue_rt_entity+0x320/0x360 [ 48.950805] enqueue_rt_entity+0x2c/0x44 [ 48.950805] enqueue_task_rt+0x24/0x94 [ 48.950836] ttwu_do_activate+0x54/0xc0 [ 48.950836] try_to_wake_up+0x248/0x5c8 [ 48.950836] __setup_irq+0x420/0x5f0 [ 48.950836] request_threaded_irq+0xdc/0x184 [ 48.950866] devm_request_threaded_irq+0x58/0xa4 [ 48.950866] omap_i2c_probe+0x530/0x6a0 [ 48.950897] platform_drv_probe+0x50/0xb0 [ 48.950897] driver_probe_device+0x1f8/0x2cc [ 48.950897] __driver_attach+0xc0/0xc4 [ 48.950927] bus_for_each_dev+0x6c/0xa0 [ 48.950927] bus_add_driver+0x100/0x210 [ 48.950927] driver_register+0x78/0xf4 [ 48.950958] do_one_initcall+0x3c/0x16c [ 48.950958] kernel_init_freeable+0x20c/0x2d8 [ 48.950958] kernel_init+0x8/0x110 [ 48.950988] ret_from_fork+0x14/0x24 [ 48.950988] -> #4 (&rt_b->rt_runtime_lock){-.-...}: [ 48.951019] _raw_spin_lock+0x40/0x50 [ 48.951019] rq_offline_rt+0x9c/0x2bc [ 48.951019] set_rq_offline.part.2+0x2c/0x58 [ 48.951049] rq_attach_root+0x134/0x144 [ 48.951049] cpu_attach_domain+0x18c/0x6f4 [ 48.951049] build_sched_domains+0xba4/0xd80 [ 48.951080] sched_init_smp+0x68/0x10c [ 48.951080] kernel_init_freeable+0x160/0x2d8 [ 48.951080] kernel_init+0x8/0x110 [ 48.951080] ret_from_fork+0x14/0x24 [ 48.951110] -> #3 (&rq->lock){-.-.-.}: [ 48.951110] _raw_spin_lock+0x40/0x50 [ 48.951141] task_fork_fair+0x30/0x124 [ 48.951141] sched_fork+0x194/0x2e0 [ 48.951141] copy_process.part.5+0x448/0x1a20 [ 48.951171] _do_fork+0x98/0x7e8 [ 48.951171] kernel_thread+0x2c/0x34 [ 48.951171] rest_init+0x1c/0x18c [ 48.951202] start_kernel+0x35c/0x3d4 [ 48.951202] 0x8000807c [ 48.951202] -> #2 (&p->pi_lock){-.-.-.}: [ 48.951232] _raw_spin_lock_irqsave+0x50/0x64 [ 48.951232] try_to_wake_up+0x30/0x5c8 [ 48.951232] up+0x4c/0x60 [ 48.951263] __up_console_sem+0x2c/0x58 [ 48.951263] console_unlock+0x3b4/0x650 [ 48.951263] vprintk_emit+0x270/0x474 [ 48.951293] vprintk_default+0x20/0x28 [ 48.951293] printk+0x20/0x30 [ 48.951324] kauditd_hold_skb+0x94/0xb8 [ 48.951324] kauditd_thread+0x1a4/0x56c [ 48.951324] kthread+0x104/0x148 [ 48.951354] ret_from_fork+0x14/0x24 [ 48.951354] -> #1 ((console_sem).lock){-.....}: [ 48.951385] _raw_spin_lock_irqsave+0x50/0x64 [ 48.951385] down_trylock+0xc/0x2c [ 48.951385] __down_trylock_console_sem+0x24/0x80 [ 48.951385] console_trylock+0x10/0x8c [ 48.951416] vprintk_emit+0x264/0x474 [ 48.951416] vprintk_default+0x20/0x28 [ 48.951416] printk+0x20/0x30 [ 48.951446] tk_debug_account_sleep_time+0x5c/0x70 [ 48.951446] __timekeeping_inject_sleeptime.constprop.3+0x170/0x1a0 [ 48.951446] timekeeping_resume+0x218/0x23c [ 48.951477] syscore_resume+0x94/0x42c [ 48.951477] suspend_enter+0x554/0x9b4 [ 48.951477] suspend_devices_and_enter+0xd8/0x4b4 [ 48.951507] enter_state+0x934/0xbd4 [ 48.951507] pm_suspend+0x14/0x70 [ 48.951507] state_store+0x68/0xc8 [ 48.951538] kernfs_fop_write+0xf4/0x1f8 [ 48.951538] __vfs_write+0x1c/0x114 [ 48.951538] vfs_write+0xa0/0x168 [ 48.951568] SyS_write+0x3c/0x90 [ 48.951568] __sys_trace_return+0x0/0x10 [ 48.951568] -> #0 (tk_core){----..}: [ 48.951599] lock_acquire+0xe0/0x294 [ 48.951599] ktime_get_update_offsets_now+0x5c/0x1d4 [ 48.951629] retrigger_next_event+0x4c/0x90 [ 48.951629] on_each_cpu+0x40/0x7c [ 48.951629] clock_was_set_work+0x14/0x20 [ 48.951660] process_one_work+0x2b4/0x808 [ 48.951660] worker_thread+0x3c/0x550 [ 48.951660] kthread+0x104/0x148 [ 48.951690] ret_from_fork+0x14/0x24 [ 48.951690] other info that might help us debug this: [ 48.951690] Chain exists of: tk_core --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock [ 48.951721] Possible unsafe locking scenario: [ 48.951721] CPU0 CPU1 [ 48.951721] ---- ---- [ 48.951721] lock(hrtimer_bases.lock); [ 48.951751] lock(&rt_b->rt_runtime_lock); [ 48.951751] lock(hrtimer_bases.lock); [ 48.951751] lock(tk_core); [ 48.951782] *** DEADLOCK *** [ 48.951782] 3 locks held by kworker/0:0/3: [ 48.951782] #0: ("events"){.+.+.+}, at: [<c0156590>] process_one_work+0x1f8/0x808 [ 48.951812] #1: (hrtimer_work){+.+...}, at: [<c0156590>] process_one_work+0x1f8/0x808 [ 48.951843] #2: (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90 [ 48.951843] stack backtrace: [ 48.951873] CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.10.0-rc7-next-20170213+ [ 48.951904] Workqueue: events clock_was_set_work [ 48.951904] [<c0110208>] (unwind_backtrace) from [<c010c224>] (show_stack+0x10/0x14) [ 48.951934] [<c010c224>] (show_stack) from [<c04ca6c0>] (dump_stack+0xac/0xe0) [ 48.951934] [<c04ca6c0>] (dump_stack) from [<c019b5cc>] (print_circular_bug+0x1d0/0x308) [ 48.951965] [<c019b5cc>] (print_circular_bug) from [<c019d2a8>] (validate_chain+0xf50/0x1324) [ 48.951965] [<c019d2a8>] (validate_chain) from [<c019ec18>] (__lock_acquire+0x468/0x7e8) [ 48.951995] [<c019ec18>] (__lock_acquire) from [<c019f634>] (lock_acquire+0xe0/0x294) [ 48.951995] [<c019f634>] (lock_acquire) from [<c01d0ea0>] (ktime_get_update_offsets_now+0x5c/0x1d4) [ 48.952026] [<c01d0ea0>] (ktime_get_update_offsets_now) from [<c01cc624>] (retrigger_next_event+0x4c/0x90) [ 48.952026] [<c01cc624>] (retrigger_next_event) from [<c01e4e24>] (on_each_cpu+0x40/0x7c) [ 48.952056] [<c01e4e24>] (on_each_cpu) from [<c01cafc4>] (clock_was_set_work+0x14/0x20) [ 48.952056] [<c01cafc4>] (clock_was_set_work) from [<c015664c>] (process_one_work+0x2b4/0x808) [ 48.952087] [<c015664c>] (process_one_work) from [<c0157774>] (worker_thread+0x3c/0x550) [ 48.952087] [<c0157774>] (worker_thread) from [<c015d644>] (kthread+0x104/0x148) [ 48.952087] [<c015d644>] (kthread) from [<c0107830>] (ret_from_fork+0x14/0x24) Replace printk() with printk_deferred(), which does not call into the scheduler. Fixes: 0bf43f15db85 ("timekeeping: Prints the amounts of time spent during suspend") Reported-and-tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: John Stultz <john.stultz@linaro.org> Cc: "[4.9+]" <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20170215044332.30449-1-sergey.senozhatsky@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-15mmc: core: add mmc prefix for blk_fixupsShawn Lin
That makes all the quirks table look more consistent. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15mmc: core: move all quirks together into quirks.hShawn Lin
It's not appreciated to place quirks everywhere, let's put them together just like what we do for USB, PCI etc. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15mmc: core: improve the quirks for sdio devicesShawn Lin
Rename mmc_fixup_methods to sdio_fixup_methods to better reflect that it's for sdio devices. So we could also pass on it from sdio card's probe sequence just like what we do for eMMC and block there. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15mmc: core: move some sdio IDs out of quirks fileShawn Lin
Consolidate all the sdio devices' IDs into sdio_ids. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15mmc: core: change quirks.c to be a header fileShawn Lin
Rename quirks.c to quirks.h, and include it for individual C files which need it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15mmc: sdhci-cadence: fix bit shift of read data from PHY portMasahiro Yamada
This macro is currently unused, but it may be useful for debug use. Fix it just in case. Fixes: ff6af28faff5 ("mmc: sdhci-cadence: add Cadence SD4HC support") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15MIPS: lantiq: Set physical_memsizeHauke Mehrtens
physical_memsize is needed by the vpe loader code and the platform specific code has to define it. This value will be given to the firmware loaded with the VPE loader. I am not aware of any standard interface or better value to provide here. Reported-by: kbuild test robot <lkp@intel.com> Fixes: d9ae4f18c0d2 ("MIPS: Lantiq: Activate more drivers in default configuration") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: John Crispin <john@phrozen.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14908/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-15esp: Add a software GRO codepathSteffen Klassert
This patch adds GRO ifrastructure and callbacks for ESP on ipv4 and ipv6. In case the GRO layer detects an ESP packet, the esp{4,6}_gro_receive() function does a xfrm state lookup and calls the xfrm input layer if it finds a matching state. The packet will be decapsulated and reinjected it into layer 2. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15xfrm: Extend the sec_path for IPsec offloadingSteffen Klassert
We need to keep per packet offloading informations across the layers. So we extend the sec_path to carry these for the input and output offload codepath. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15drm/dp/mst: fix kernel oops when turning off secondary monitorPierre-Louis Bossart
100% reproducible issue found on SKL SkullCanyon NUC with two external DP daisy-chained monitors in DP/MST mode. When turning off or changing the input of the second monitor the machine stops with a kernel oops. This issue happened with 4.8.8 as well as drm/drm-intel-nightly. This issue is traced to an inconsistent control flow in drm_dp_update_payload_part1(): the 'port' pointer is set to NULL at the same time as 'req_payload.num_slots' is set to zero, but the pointer is dereferenced even when req_payload.num_slot is zero. The problematic dereference was introduced in commit dfda0df34 ("drm/mst: rework payload table allocation to conform better") and may impact all versions since v3.18 The fix suggested by Chris Wilson removes the kernel oops and was found to work well after 10mn of monkey-testing with the second monitor power and input buttons Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98990 Fixes: dfda0df34264 ("drm/mst: rework payload table allocation to conform better.") Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: <stable@vger.kernel.org> # v3.18+ Tested-by: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487076561-2169-1-git-send-email-jani.nikula@intel.com
2017-02-15fuse: fix use after free issue in fuse_dev_do_read()Sahitya Tummala
There is a potential race between fuse_dev_do_write() and request_wait_answer() contexts as shown below: TASK 1: __fuse_request_send(): |--spin_lock(&fiq->waitq.lock); |--queue_request(); |--spin_unlock(&fiq->waitq.lock); |--request_wait_answer(): |--if (test_bit(FR_SENT, &req->flags)) <gets pre-empted after it is validated true> TASK 2: fuse_dev_do_write(): |--clears bit FR_SENT, |--request_end(): |--sets bit FR_FINISHED |--spin_lock(&fiq->waitq.lock); |--list_del_init(&req->intr_entry); |--spin_unlock(&fiq->waitq.lock); |--fuse_put_request(); |--queue_interrupt(); <request gets queued to interrupts list> |--wake_up_locked(&fiq->waitq); |--wait_event_freezable(); <as FR_FINISHED is set, it returns and then the caller frees this request> Now, the next fuse_dev_do_read(), see interrupts list is not empty and then calls fuse_read_interrupt() which tries to access the request which is already free'd and gets the below crash: [11432.401266] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b6b ... [11432.418518] Kernel BUG at ffffff80083720e0 [11432.456168] PC is at __list_del_entry+0x6c/0xc4 [11432.463573] LR is at fuse_dev_do_read+0x1ac/0x474 ... [11432.679999] [<ffffff80083720e0>] __list_del_entry+0x6c/0xc4 [11432.687794] [<ffffff80082c65e0>] fuse_dev_do_read+0x1ac/0x474 [11432.693180] [<ffffff80082c6b14>] fuse_dev_read+0x6c/0x78 [11432.699082] [<ffffff80081d5638>] __vfs_read+0xc0/0xe8 [11432.704459] [<ffffff80081d5efc>] vfs_read+0x90/0x108 [11432.709406] [<ffffff80081d67f0>] SyS_read+0x58/0x94 As FR_FINISHED bit is set before deleting the intr_entry with input queue lock in request completion path, do the testing of this flag and queueing atomically with the same lock in queue_interrupt(). Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: fd22d62ed0c3 ("fuse: no fc->lock for iqueue parts") Cc: <stable@vger.kernel.org> # 4.2+
2017-02-15ath9k: use correct OTP register offsets for the AR9340 and AR9550Christian Lamparter
This patch fixes the OTP register definitions for the AR934x and AR9550 WMAC SoC. Previously, the ath9k driver was unable to initialize the integrated WMAC on an Aerohive AP121: | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: Unable to initialize hardware; initialization status: -5 | ath9k ar934x_wmac: failed to initialize device | ath9k: probe of ar934x_wmac failed with error -5 It turns out that the AR9300_OTP_STATUS and AR9300_OTP_DATA definitions contain a typo. Cc: Gabor Juhos <juhosg@openwrt.org> Cc: stable@vger.kernel.org Fixes: add295a4afbdf5852d0 "ath9k: use correct OTP register offsets for AR9550" Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-15rt2500usb: don't mark register accesses as inlineArnd Bergmann
When CONFIG_KASAN is set, we get a rather large stack here: drivers/net/wireless/ralink/rt2x00/rt2500usb.c: In function 'rt2500usb_set_device_state': drivers/net/wireless/ralink/rt2x00/rt2500usb.c:1074:1: error: the frame size of 3032 bytes is larger than 100 bytes [-Werror=frame-larger-than=] If we don't force those functions to be inline, the compiler can figure this out better itself and not inline the functions when doing so would be harmful, reducing the stack size to a merge 256 bytes. Note that there is another problem that manifests in this driver, as a result of the typecheck() macro causing even larger stack frames. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15brcmfmac: Use net_device_stats from struct net_deviceTobias Klauser
Instead of using a private copy of struct net_device_stats in struct brcm_if, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: Fix if == else warnings in halbtc8723b1ant.cLarry Finger
The 0-DAY kernel test infrastructure reports the following: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c:1875:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c:2253:3-5: WARNING: possible condition with no effect (if == else) Reported-by: kbuild-all@01.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: Fix if == else warnings in halbtc8821a1ant.cLarry Finger
The 0-DAY kernel test infrastructure reports the following: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:1771:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:2126:3-5: WARNING: possible condition with no effect (if == else) Reported-by: kbuild-all@01.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: Fix if == else warnings in halbtc8821a2ant.cLarry Finger
The 0-DAY kernel test infrastructure reports the following: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3023:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3035:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3037:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3047:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3075:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3085:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3129:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3141:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3143:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3153:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3179:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3181:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3192:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2677:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2833:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2847:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2857:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2885:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2895:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2940:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2788:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2391:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2417:2-4: WARNING: possible condition with no effect (if == else) Reported-by: kbuild-all@01.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15mwifiex: don't enable/disable IRQ 0 during suspend/resumeBrian Norris
If we don't have an out-of-band wakeup IRQ configured through DT (as most platforms don't), then we fall out of this function with 'irq_wakeup == 0'. Other code (e.g., mwifiex_disable_wake() and mwifiex_enable_wake()) treats 'irq_wakeup >= 0' as a valid IRQ, and so we end up calling {enable,disable}_irq() on IRQ 0. That seems bad, so let's not do that. Same problem as fixed in this patch: https://patchwork.kernel.org/patch/9531693/ [PATCH v2 2/3] btmrvl: set irq_bt to -1 when failed to parse it with the difference that: (a) this one is actually a regression and (b) this affects both device tree and non-device-tree systems While fixing the regression, also drop the verbosity on the parse failure, so we don't see this when a DT node is present but doesn't have an interrupt property (this is perfectly legal): [ 21.999000] mwifiex_pcie 0000:01:00.0: fail to parse irq_wakeup from device tree Fixes: 853402a00823 ("mwifiex: Enable WoWLAN for both sdio and pcie") Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Rajat Jain <rajatja@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15orinoco: Use net_device_stats from struct net_deviceTobias Klauser
Instead of using a private copy of struct net_device_stats in struct orinoco_private, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: fix semicolon.cocci warningsJulia Lawall
Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15wlcore: disable multicast filter in AP modeIain Hunter
Enable AP support for allmulticast for MDNS. It can be enabled by bringing up the interface with ip command with argument allmulticast on Signed-off-by: Iain Hunter <i-hunter1@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15powerpc/mm/radix: Skip ptesync in pte update helpersAneesh Kumar K.V
We do them at the start of tlb flush, and we are sure a pte update will be followed by a tlbflush. Hence we can skip the ptesync in pte update helpers. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/mm/radix: Use ptep_get_and_clear_full when clearing pte for full mmAneesh Kumar K.V
This helps us to do some optimization for application exit case, where we can skip the DD1 style pte update sequence. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/mm/radix: Update pte update sequence for pte clear caseAneesh Kumar K.V
In the kernel we do follow the below sequence in different code paths. pte = ptep_get_clear(ptep) .... set_pte_at(ptep, pte) We do that for mremap, autonuma protection update and softdirty clearing. This implies our optimization to skip a tlb flush when clearing a pte update is not valid, because for DD1 system that followup set_pte_at will be done witout doing the required tlbflush. Fix that by always doing the dd1 style pte update irrespective of new_pte value. In a later patch we will optimize the application exit case. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/mm: Update PROTFAULT handling in the page fault pathAneesh Kumar K.V
With radix, we can get page fault with DSISR_PROTFAULT value set in case of PROT_NONE or autonuma mapping. The PROT_NONE case in handled by the vma check where we consider the access bad. For autonuma we should fall through and fixup the access mask correctly. Without this patch we trigger the WARN_ON() on radix. This code moves that WARN_ON() within a radix_enabled() check. I also moved the WARN_ON() outside the if condition making it apply for all type of faults (exec/write/read). It is also conditionalized for book3s, because BOOK3E can also get a PROTFAULT to handle the D/I cache sync. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/xmon: Fix data-breakpointRavi Bangoria
Currently xmon data-breakpoint feature is broken. Whenever there is a watchpoint match occurs, hw_breakpoint_handler will be called by do_break via notifier chains mechanism. If watchpoint is registered by xmon, hw_breakpoint_handler won't find any associated perf_event and returns immediately with NOTIFY_STOP. Similarly, do_break also returns without notifying to xmon. Solve this by returning NOTIFY_DONE when hw_breakpoint_handler does not find any perf_event associated with matched watchpoint, rather than NOTIFY_STOP, which tells the core code to continue calling the other breakpoint handlers including the xmon one. Cc: stable@vger.kernel.org Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/mm: Fix build break with BOOK3S_64=n and MEMORY_HOTPLUG=yMichael Ellerman
The recently merged HPT (Hash Page Table) resize support broke the build when BOOK3S_64=n (ie. 32-bit or 64-bit Book3E) and MEMORY_HOTPLUG=y: arch/powerpc/mm/mem.o: In function `.arch_add_memory': (.text+0x4e4): undefined reference to `.resize_hpt_for_hotplug' Fix it by adding a dummy version. Fixes: 438cc81a41e8 ("powerpc/pseries: Automatically resize HPT for memory hot add/remove") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15xfrm: Export xfrm_parse_spi.Steffen Klassert
We need it in the ESP offload handlers, so export it. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15net: Prepare gro for packet consuming gro callbacksSteffen Klassert
The upcomming IPsec ESP gro callbacks will consume the skb, so prepare for that. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15net: Add a skb_gro_flush_final helper.Steffen Klassert
Add a skb_gro_flush_final helper to prepare for consuming skbs in call_gro_receive. We will extend this helper to not touch the skb if the skb is consumed by a gro callback with a followup patch. We need this to handle the upcomming IPsec ESP callbacks as they reinject the skb to the napi_gro_receive asynchronous. The handler is used in all gro_receive functions that can call the ESP gro handlers. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15xfrm: Add a secpath_set helper.Steffen Klassert
Add a new helper to set the secpath to the skb. This avoids code duplication, as this is used in multiple places. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15ext4: fix fencepost in s_first_meta_bg validationTheodore Ts'o
It is OK for s_first_meta_bg to be equal to the number of block group descriptor blocks. (It rarely happens, but it shouldn't cause any problems.) https://bugzilla.kernel.org/show_bug.cgi?id=194567 Fixes: 3a4b77cd47bb837b8557595ec7425f281f2ca1fe Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2017-02-14net: ethernet: ti: cpsw: use var instead of func for usage countIvan Khoronzhuk
The usage count function is based on ndev_running flag that is updated before calling ndo_open/close, but if ndo is called in another place, as with suspend/resume, the counter is not changed, that breaks sus/resume. For common resource no difference which device is using it, does matter only device count. So, replace usage count function on var and inc and dec it in ndo_open/close. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14bpf: kernel header files need to be copied into the tools directoryStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14tcp: tcp_probe: use spin_lock_bh()Eric Dumazet
tcp_rcv_established() can now run in process context. We need to disable BH while acquiring tcp probe spinlock, or risk a deadlock. Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ricardo Nabinger Sanchez <rnsanchez@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 12:34:34 +0000