summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-13scsi: megaraid_sas: enhance debug logs in OCR contextShivasharan S
Add additional logging from driver in OCR context. Add debug logs for partial completion of IOs is iodone context. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: set residual bytes count during IO completionShivasharan S
Fixing issue of not setting residual bytes correctly. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: raid 1 write performance for large ioShivasharan S
Avoid Host side PCI bandwidth bottleneck and hint FW to do Write buffering using RaidFlag MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT. Once IO is landed in FW with MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT, it will do single DMA from host and buffer the Write operation. On back end, FW will DMA same buffer to the Mirror and Data Arm. This will improve large block IO performance which bottleneck due to Host side PCI bandwidth limitation. Consistent ~4000MB T.P for 256K Block size is expected performance numbers. IOPS for small Block size should be on par with Disk performance. (E.g 42 SAS Disk in JBOD mode gives 3700MB T.P. Same Drive used in R1 WT mode, should give ~1800MB T.P) Using this patch 24 R1 VDs (HDD) gives below performance for Sequential Write. Without this patch, we cannot reach above 3200MB (Throughput is in MB.) Block Size 50% 256K and 50% 4K 100% 256K 4K 3100 2030 8K 3140 2740 16K 3140 3140 32K 3400 3240 64K 3500 3700 128K 3870 3870 256K 3920 3920 Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: NVME fast path io supportShivasharan S
This patch provide true fast path IO support. Driver creates PRP for NVME drives and send Fast Path for performance. Certain h/w requirement needs to be taken care in driver. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: NVME interface target prop addedShivasharan S
This patch fetch true values of NVME property from FW using New DCMD interface MR_DCMD_DEV_GET_TARGET_PROP Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: NVME Interface detection and prop settingsShivasharan S
Adding detection logic for NVME device attached behind Ventura controller. Driver set HostPageSize in IOC_INIT frame to inform about page size for NVME devices. Firmware reports NVME page size to the driver. PD INFO DCMD provide new interface type NVME_PD. Driver set property of NVME device. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: change issue_dcmd to return void from intShivasharan S
With the changes to remove checks for a valid request descriptor, issue_dcmd will now always return DCMD_SUCCESS. This patch changes return type of issue_dcmd to void and change all callers appropriately. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: megasas_get_request_descriptor always return valid descShivasharan S
No functional change. Code clean up. Removing error code which is not valid scenario. In megasas_get_request_descriptor we can remove the error handling which is not required. With fusion controllers, if there is a valid message frame available, we are guaranteed to get a corresponding request descriptor. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Use DID_REQUEUEShivasharan S
Moving to use DID_REQUEUE return type for reliable unconditional retries. Driver wants unconditional re-queue, so replace DID_RESET with DID_REQUEUE Discussed below - https://www.spinics.net/lists/linux-scsi/msg102848.html Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: RAID map is accessed for SYS PDs when use_seqnum_jbod_fp ↵Shivasharan S
is not set Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Refactor MEGASAS_IS_LOGICAL macro using sdevShivasharan S
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: 32 bit descriptor fire cmd optimizationShivasharan S
No functional change. Code refactor. megasas_fire_cmd_fusion can always use 32 bit descriptor write for ventura. No need to pass extra flag. Only IOC INIT required 64 bit Descriptor write. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: raid 1 fast path code optimizeShivasharan S
No functional change. Code refactor. Remove function megasas_fpio_to_ldio as we never require to convert fpio to ldio because of frame unavailability. Grab extra frame of raid 1 write fast path before it creates first frame as Fast Path. Removed is_raid_1_fp_write flag as raid 1 write fast path command is decided using r1_alt_dev_handle only. Move resetting megasas_cmd_fusion fields at common function megasas_return_cmd_fusion. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: cpu select rework.Shivasharan S
No functional change. Code refactor. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13Revert "scsi: megaraid_sas: Enable or Disable Fast path based on the PCI ↵Shivasharan S
Threshold Bandwidth" This reverts commit "3e5eadb1a881" ("scsi: megaraid_sas: Enable or Disable Fast path based on the PCI Threshold Bandwidth") This patch was aimed to increase performance of R1 Write operation for large IO size. Since this method used timer approach, it turn on/off fast path did not work as expected. Patch 0013 describes new algorithm and performance number. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13mmc: queue: turn queue flags into boolsLinus Walleij
Instead of masking and setting two bits in the "flags" field for the mmc_queue, just use two bools named "suspended" and "new_request". The masking and setting would likely have race conditions anyways, it is better to use a simple member like this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: rename mmc_active to areqLinus Walleij
The mmc_active member of struct mmc_queue_req has a very confusing name: this is certainly not always "active", it is the asynchronous request associated by the mmc_queue_req but it is not guaranteed to be "active" in any sense, such as being running on the host. Simply rename this member to "areq". Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: refactor mmc_blk_rw_try_restart()Linus Walleij
The mmc_blk_rw_start_new() was named after the label inside mmc_blk_issue_rw_rq() but is really a confusing name for this function: what it does is to try to restart the latest issued command on the host and card of the current MMC queue. So rename it mmc_blk_rw_try_restart() that reflects what it is doing and at this point also refactore the function to treat the removed card as an exception and just exit if this happens and run on in the function if that is not happening. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: rename mmc_start_req() to *areq()Linus Walleij
With the coexisting __mmc_start_request(), mmc_start_request() and __mmc_start_req() it is a bit confusing that mmc_start_req() actually does not start a normal request, but an asynchronous request. Rename it to mmc_start_areq() to make it explicit what the function is doing, also fix the kerneldoc for this function while we're at it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: rename rqc and reqLinus Walleij
In the function mmc_blk_issue_rw_rq() the new request coming in from the block layer is called "rqc" and the old request that was potentially just returned back from the asynchronous mechanism is called "req". This is really confusing when trying to analyze and understand the code, it becomes a perceptual nightmare to me. Maybe others have better parserheads but it is not working for me. Rename "rqc" to "new_req" and "req" to "old_req" to reflect what is semantically going on into the syntax. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: inline the command abort and start new goto:sLinus Walleij
The goto statements sprinkled over the mmc_blk_issue_rw_rq() function has grown over the years and makes the code pretty hard to read. Inline the calls such that: goto cmd_abort; -> mmc_blk_rw_cmd_abort(card, req); mmc_blk_rw_start_new(mq, card, rqc); return; goto start_new_req; -> mmc_blk_rw_start_new(mq, card, rqc); return; After this it is more clear how we exit the do {} while loop in this function, and it gets possible to split the code apart. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: switch to ida_simple_ functions in block.cHeiner Kallweit
ida code in block.c can be significantly simplified by switching to the ida_simple_ functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: omap_hsmmc: avoid possible overflow of timeout valueRavikumar Kattekola
Fixes: a45c6cb81647 ("[ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3") when using really large timeout (up to 4*60*1000 ms for bkops) there is a possibility of data overflow using unsigned int so use 64 bit unsigned long long. Signed-off-by: Ravikumar Kattekola <rk@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: omap_hsmmc: use generic_cmd6_time to program timeout value for CMD6Kishon Vijay Abraham I
commit e2bf08d643a244ccb ("omap_hsmmc: set a large data timeout for commands with busy signal") sets an arbitrary timeout value (100ms) for commands like CMD6 (MMC SWITCH). However extended CSD register defined in the eMMC standard has a field for GENERIC_CMD6_TIME which indicates the default maximum timeout for a SWITCH command. Use busy_timeout of cmd structure (populated with GENERIC_CMD6_TIME in the case of SWITCH command) to program the data timeout value in omap_hsmmc driver. SWITCH command to turn the cache on took more than 100ms to complete with MICRON eMMC card present in AM572x IDK REV 1.3A resulting in timeout and failed enumeration. It is fixed here by programming the timeout with the value advertised in GENERIC_CMD6_TIME. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Ravikumar Kattekola <rk@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: omap_hsmmc: reset cmd line on ceb errorRavikumar Kattekola
When CEB (command end bit error) occurs reset CMD line to avoid system ending up in erroneous state. While command line is reset for CTO and CCRC errors, it's not done for CEB error. Fix it here. Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ravikumar Kattekola <rk@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13dt-bindings: mmc: sunxi: Document A64 eMMC compatibleMaxime Ripard
We introduced recently a new compatible to deal with the A64 eMMC controller, let's document its binding. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: dw_mmc: silent verbose log when calling from PM contextShawn Lin
When deploying runtime PM, it's quite verbose to print the log of ios setting. Also it's useless to print it from system PM as it should be the same with booting time. We also have sysfs to get all these information from ios attribute, so let's skip this print from PM context. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core/mmci: restore pre/post_req behaviourLinus Walleij
commit 64b12a68a9f74bb32d8efd7af1ad8a2ba02fc884 "mmc: core: fix prepared requests while doing bkops" is fixing a bug in the wrong way. A bug in the MMCI device driver is fixed by amending the MMC core. Thinking about it: what the pre- and post-callbacks are doing is to essentially map and unmap SG lists for DMA transfers. Why would we not be able to do that just because a BKOPS command is sent inbetween? Having to unprepare/prepare the next asynchronous request for DMA seems wrong. Looking the backtrace in that commit we can see what the real problem actually is: mmci_data_irq() is calling mmci_dma_unmap() twice which is goung to call arm_dma_unmap_sg() twice and v7_dma_inv_range() twice for the same sglist and that will crash. This happens because a request is prepared, then a BKOPS is sent. The IRQ completing the BKOPS command goes through mmci_data_irq() and thinks that a DMA operation has just been completed because dma_inprogress() reports true. It then proceeds to unmap the sglist. But that was wrong! dma_inprogress() should NOT be true because no DMA was actually in progress! We had just prepared the sglist, and the DMA channel dma_current has been configured, but NOT started! Because of this, the sglist is already unmapped when we get our actual data completion IRQ, and we are unmapping the sglist once more, and we get this crash. Therefore, we need to revert this solution pushing the problem to the core and causing problems, and instead augment the implementation such that dma_inprogress() only reports true if some DMA has actually been started. After this we can keep the request prepared during the BKOPS and we need not unprepare/reprepare it. Fixes: 64b12a68a9f7 ("mmc: core: fix prepared requests while doing bkops") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Add more debug informationsMaxime Ripard
Add a bit more debug messages that can be helpful when debugging the clock setup. Also fill the actual_clock field in struct mmc_host to report properly the current frequency in debugfs. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Add EMMC (MMC2) controller compatibleMaxime Ripard
The MMC2 controller on the A64 is kind of a special beast. While the general controller design is the same than the other MMC controllers in the SoC, it also has a bunch of features and changes that prevent it to be driven in the same way. It has for example a different bus width limit, a different maximum frequency, and, for some reason, the maximum buffer size of a DMA descriptor. Add a new compatible specifically for this controller. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Mask DATA0 when updating the clockMaxime Ripard
The A64 MMC controllers need DATA0 to be masked while updating the clock, otherwise any subsequent command will result in a timeout. It's not really clear at this point what DATA0 is exactly, but this behaviour is present in Allwinner's tree, and has been suggested by Allwinner engineers as fixes for the timeout. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Enable the new timings for the A64 MMC controllersMaxime Ripard
The A64 MMC controllers need to set a "new timings" bit when a new rate is set. The actual meaning of that bit is not clear yet, but not setting it leads to some corner-case issues, like the CMD53 failing, which is used to implement SDIO packet aggregation. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Always set signal delay to 0 for A64Maxime Ripard
Experience have shown that the using the autocalibration could severely degrade the performances of the MMC bus. Allwinner is using in its BSP a delay set to 0 for all the modes but HS400. Remove the calibration code for now, and add comments to document our findings. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Gate the clock when rate is 0Maxime Ripard
The MMC core assumes that the code will gate the clock when the bus frequency is set to 0, which we've been ignoring so far. Handle that. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Fix clock frequency change sequenceMaxime Ripard
The SD specification documents that the clock frequency should only be changed once gated (Section 3.2.3 - SD Clock Frequency Change Sequence). The current code first modifies the parent clock, gates it and then modifies the internal divider. This means that since the parent clock rate might be changed, the bus clock might be changed as well before it is gated, which breaks the specification. Move the gating before the parent rate modification. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: fix error path in mmc_host_allocHeiner Kallweit
Properly reverse everything if mmc_gpio_alloc(host) fails. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: simplify ida handlingHeiner Kallweit
ida handling can be simplified by switching to the ida_simple_ functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-msm: Remove unnecessary comments of CDC init sequenceRitesh Harjani
This removes CDC init sequence comments which are not useful anyway. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-msm: Remove platform_execute_tuning from sdhci_msm_opsRitesh Harjani
platform_execute_tuning should not really exist as it does not do anything useful. So remove this ops and directly plug sdhci_msm_execute_tuning with mmc_host_ops. Also in case of HS400 tuning clear SDHCI_HS400_TUNING flag once HS400 related mode selection is done. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: Extend mmc_of_parse() to check for mmc-ddr-3_3vUlf Hansson
When mmc_of_parse() finds the binding, it sets the mmc cap, MMC_CAP_3_3V_DDR, which informs the core whether eMMC DDR at 3.3V I/O is supported by the mmc host. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Jan Glauber <jglauber@cavium.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
2017-02-13mmc: dt: Document binding for eMMC DDR 3.3V I/O voltage supportUlf Hansson
Cc: <devicetree@vger.kernel.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Jan Glauber <jglauber@cavium.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Rob Herring <robh@kernel.org>
2017-02-13mmc: core: Invent MMC_CAP_3_3V_DDRUlf Hansson
According the JEDEC specification an eMMC card supporting 1.8V vccq in DDR mode should also be capable of 3.3V. However, it's been reported that some mmc hosts supports 3.3V, but not 1.8V. Currently the mmc core implements an error handling when the host fails to set 1.8V for vccq, by falling back to 3.3V. Unfortunate, this seems to be insufficient for some mmc hosts. To enable these to use eMMC DDR mode let's invent a new mmc cap, MMC_CAP_3_3V_DDR, which tells whether they support the eMMC 3.3V DDR mode. In case MMC_CAP_3_3V_DDR is set, but not MMC_CAP_1_8V_DDR, let's change to remain on the 3.3V, as it's the default voltage level for vccq, set by the earlier power up sequence. As this change introduces MMC_CAP_3_3V_DDR, let's take the opportunity to do some re-formatting of the related defines in the header file. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Jan Glauber <jglauber@cavium.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
2017-02-13mmc: core: Rename __mmc_set_signal_voltage() to mmc_set_signal_voltage()Ulf Hansson
Earlier the mmc_set_signal_voltage() existed, but since it has been renamed to mmc_set_uhs_voltage(), we can now use that name instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Jan Glauber <jglauber@cavium.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
2017-02-13mmc: core: Clarify usage of mmc_set_signal_voltage()Ulf Hansson
The mmc_set_signal_voltage() function is used for SD/SDIO when switching to 1.8V for UHS mode. To clarify this let's do the following changes. - We are always providing MMC_SIGNAL_VOLTAGE_180 as the signal_voltage parameter to the function. Then, let's just remove the parameter as it serves no purpose. - Rename the function to mmc_set_uhs_voltage(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Jan Glauber <jglauber@cavium.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
2017-02-13mmc: core: Remove redundant code in mmc_set_signal_voltage()Ulf Hansson
The mmc_set_signal_voltage() function is used for SD/SDIO when switching to 1.8V for UHS mode. Therefore let's remove the redundant code dealing with MMC_SIGNAL_VOLTAGE_330. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Jan Glauber <jglauber@cavium.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
2017-02-13mmc: sh_mobile_sdhi: explain clock bindingsChris Brandt
In the case of a single clock source, you don't need names. However, if the controller has 2 clock sources, you need to name them correctly so the driver can find the 2nd one. The 2nd clock is for the internal card detect logic. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Rob Herring <robh@kernel.org>
2017-02-13mmc: sh_mobile_sdhi: add support for 2 clocksChris Brandt
Some controllers have 2 clock sources instead of 1. The 2nd clock is for the internal card detect logic and must be enabled/disabled along with the main core clock for proper operation. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2017-02-13mmc: meson: cleanup stray debug messagesKevin Hilman
Cleanup some debug prints that cause needless noise during normal usage. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: stop passing around pointless return valuesLinus Walleij
The mmc_blk_issue_rq() function is called in exactly one place in queue.c and there the return value is ignored. So the functions called from that function that also meticulously return 0/1 do so for no good reason. Error reporting on the asynchronous requests are done upward to the block layer when the requests are eventually completed or fail, which may happen during the flow of the mmc_blk_issue_* functions directly (for "special commands") or later, when an asynchronous read/write request is completed. The issuing functions do not give rise to errors on their own, and there is nothing to return back to the caller in queue.c. Drop all return values and make the function return void. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: introduce new_areq and old_areqLinus Walleij
Recycling the same variable in an x=x+1 fashion may seem clever here but it makes the code terse and hard to follow for humans. Introduce a new_areq and old_areq variable so we see what is going on. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-14 18:32:09 +0000