summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-21Bluetooth: btusb: Add RTL8851BE device 0x0bda:0xb850WangYuli
The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b850 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Co-developed-by: Hao Li <lihao1@uniontech.com> Signed-off-by: Hao Li <lihao1@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: hci_uart: Remove unnecessary NULL check before release_firmware()Chen Ni
release_firmware() checks for NULL pointers internally. Remove unneeded NULL check for fmw here. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btmtksdio: Fix wakeup source leaks on device unbindKrzysztof Kozlowski
Device can be unbound or probe can fail, so driver must also release memory for the wakeup source. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btmrvl_sdio: Fix wakeup source leaks on device unbindKrzysztof Kozlowski
Device can be unbound or probe can fail, so driver must also release memory for the wakeup source. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btintel_pcie: Do not generate coredump for diagnostic eventsKiran K
All Intel diagnostic events are part of HCI traces and there is no need to generate coredump for the same. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btusb: Add new VID/PID 13d3/3613 for MT7925Youn MÉLOIS
Add VID 13d3 & PID 3613 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3613 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Youn Melois <youn@melois.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21wifi: mt76: mt7996: remove duplicate check in mt7996_mcu_sta_mld_setup_tlv()Dan Carpenter
The "msta_link" pointer has two NULL checks. Delete the second check. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/fde7246b-08a2-4c2f-b2dc-c3fd0e6b300b@stanley.mountain Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21Revert "wifi: mt76: Check link_conf pointer in mt76_connac_mcu_sta_basic_tlv()"Lorenzo Bianconi
In mt76_connac_mcu_sta_basic_tlv() link_conf is always not NULL. Revert the commit '9890624c1b39 ("wifi: mt76: Check link_conf pointer in mt76_connac_mcu_sta_basic_tlv()")' in order to fix the following warning: drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c:394 mt76_connac_mcu_sta_basic_tlv() warn: variable dereferenced before check 'link_conf' This reverts commit 9890624c1b3948c1c7f1d0e19ef0bb7680b8c80d. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250325-mt76_connac_mcu_sta_basic_tlv-link_conf-revert-v1-1-b84efefb74ee@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: fix uninitialized symbol warningsunliming
Fix below smatch warnings: drivers/net/wireless/mediatek/mt76/mt7996/main.c:952 mt7996_mac_sta_add_links() error: uninitialized symbol 'err'. drivers/net/wireless/mediatek/mt76/mt7996/main.c:1133 mt7996_set_rts_threshold() error: uninitialized symbol 'ret'. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202504101051.1ya4Z4va-lkp@intel.com/ Signed-off-by: sunliming <sunliming@kylinos.cn> Link: https://patch.msgid.link/20250419031528.2073892-1-sunliming@linux.dev Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: avoid null deref in mt7996_stop_phy()Qasim Ijaz
In mt7996_stop_phy() the mt7996_phy structure is dereferenced before the null sanity check which could lead to a null deref. Fix by moving the dereference operation after the sanity check. Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy") Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Link: https://patch.msgid.link/20250421111344.11484-1-qasdev00@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: avoid NULL pointer dereference in mt7996_set_monitor()Qasim Ijaz
The function mt7996_set_monitor() dereferences phy before the NULL sanity check. Fix this to avoid NULL pointer dereference by moving the dereference after the check. Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy") Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Link: https://patch.msgid.link/20250421112544.13430-1-qasdev00@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7921: add 160 MHz AP for mt7922 deviceSamuel Williams
This allows mt7922 in hostapd mode to transmit up to 1.4 Gbps. Signed-off-by: Samuel Williams <sam8641@gmail.com> Link: https://patch.msgid.link/20250511005316.1118961-1-sam8641@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: fix host interrupt register initializationMichael Lo
ensure proper interrupt handling and aligns with the hardware spec by updating the register offset for MT_WFDMA0_HOST_INT_ENA. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250509083512.455095-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: introduce thermal protectionLeon Yen
Add thermal protection to prevent the chip from possible overheating due to prolonged high traffic and adverse operating conditions. Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250509082117.453819-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt76x2: Add support for LiteOn WN4516R,WN4519RHenk Vergonet
Adds support for: - LiteOn WN4516R - LiteOn WN4519R Both use: - A nonstandard USB connector - Mediatek chipset MT7600U - ASIC revision: 76320044 Disabled VHT support on ASIC revision 76320044: This fixes the 5G connectibity issue on LiteOn WN4519R module see https://github.com/openwrt/mt76/issues/971 And may also fix the 5G issues on the XBox One Wireless Adapter see https://github.com/openwrt/mt76/issues/200 I have looked at the FCC info related to the MT7632U chip as mentioned in here: https://github.com/openwrt/mt76/issues/459 These confirm the chipset does not support 'ac' mode and hence VHT should be turned of. Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250418143914.31384-1-henk.vergonet@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: Remove an unneeded local variable in mt76x02_dma_init()Christophe JAILLET
Remove 't' which is unneeded since commit f3950a414143 ("mt76: set txwi_size according to the driver value") This slightly simplifies the code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/e86d5602bdd8b6bd22258ee69536992f39470bf5.1744928865.git.christophe.jaillet@wanadoo.fr Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: prevent uninit return in mt7996_mac_sta_add_linksQasim Ijaz
If link_conf_dereference_protected() or mt7996_vif_link() or link_sta_dereference_protected() fail the code jumps to the error_unlink label and returns ret which is uninitialised. Fix this by setting err before jumping to error_unlink. Fixes: c7e4fc362443 ("wifi: mt76: mt7996: Update mt7996_mcu_add_sta to MLO support") Fixes: dd82a9e02c05 ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks") Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Link: https://patch.msgid.link/20250421110550.9839-1-qasdev00@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21Revert "wifi: mt76: mt7996: fill txd by host driver"Shayne Chen
This reverts commit 3b522cadedfe6e9e0e8193d7d4ab5aa8d0c73209. The MTK connac3 has introduced new hardware, SDO (Software Defined Offload), to offload the process of filling the TX descriptor. Initially, there were some issues, but after several fixes, it should now be stable, allowing us to revert this commit. Additionally, activating SDO is essential for the proper functioning of features like TX checksum offload. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250328022847.1612082-1-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: Add NULL check in mt7996_thermal_initCharles Han
devm_kasprintf() can return a NULL pointer on failure,but this returned value in mt7996_thermal_init() is not checked. Add NULL check in mt7996_thermal_init(), to handle kernel NULL pointer dereference error. Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy") Signed-off-by: Charles Han <hanchunchao@inspur.com> Link: https://patch.msgid.link/20250407095551.32127-1-hanchunchao@inspur.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: add EHT preamble puncturingAllan Wang
Add mt7925 EHT preamble puncturing. Signed-off-by: Allan Wang <allan.wang@mediatek.com> Link: https://patch.msgid.link/20250401083525.2734333-1-allan.wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: Fix logical vs bitwise typoDan Carpenter
This was supposed to be & instead of &&. Fixes: f0317215b367 ("wifi: mt76: mt7925: add EHT control support based on the CLC data") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/d323a443-4e81-4064-8563-b62274b53ef4@stanley.mountain Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: rework radar HWRDD idxStanleyYP Wang
The definition of MT_RX_SEL (for rdd_rx_sel) is mixed with the definition of HWRDD idx. For example, MT_RX_SEL2 is for background HWRDD idx, not an option of rdd_rx_sel. Additionally, HWRDD idx does not exactly map to band idx for Connac 3 chips. So, add mt7996_get_rdd_idx as a helper function. Finally, remove some parts of the code inherited from the legacy chips. For instance, 1. rdd_state is used for single-band-dual-HWRDD chips (for 80+80), especially the 76xx series. 2. rdd_rx_sel is also used for single-band-dual-HWRDD chips rx_sel = 0 => RDD0 for WF0, RDD1 for WF2 rx_sel = 1 => RDD0 for WF1, RDD1 for WF3 Chip Variants | 5G rdd idx | Background rdd idx ---------------------------|----------------|------------------- MT7996 (except 205/255) | 1 | 2 MT7992 | 1 | 2 MT7990 | 1 | 2 Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Reviewed-by: Money Wang <money.wang@mediatek.com> Link: https://patch.msgid.link/20250320015926.3948672-1-StanleyYP.Wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7915: rework radar HWRDD idxStanleyYP Wang
The definition of MT_RX_SEL (for rdd_rx_sel) is mixed with the definition of HWRDD idx. For example, MT_RX_SEL2 is for background HWRDD idx, not an option of rdd_rx_sel. Therefore, add mt7915_get_rdd_idx as a helper function to get the HWRDD idx for each variants. Additionally, remove some parts of the code inherited from the legacy chips. For instance, 1. rdd_state is used for single-band-dual-HWRDD chips (for 80+80), especially the 76xx series. 2. rdd_rx_sel is also used for single-band-dual-HWRDD chips rx_sel = 0 => RDD0 for WF0, RDD1 for WF2 rx_sel = 1 => RDD0 for WF1, RDD1 for WF3 Chip Variants | 5G rdd idx(=bandidx)| Background rdd idx -------------------------------|---------------------|------------------- MT7915A | 0 | 2 MT7915D | 1 | 2 MT7916 2G + 5G (2T2R+1R) | 1 | 2 MT7916 2G + 5G (3T3R) | 1 | N/A MT7981 2G + 5G | 1 | N/A MT7986 2G + 5G (one adie DBDC) | 1 | N/A MT7986 5G (one adie) | 1 (bandidx=MT_BAND1)| N/A MT7986 2G + 5G (dual adie) | 1 | N/A Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250320015918.3948643-1-StanleyYP.Wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7915: set correct background radar capabilityStanleyYP Wang
Some of the variants do not support background radar, so add a helper to report background radar capability. For mt7916, only the variant of 5G 2T2R + 1R supports background radar. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250320015909.3948612-1-StanleyYP.Wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: add PCI device id for mt7990Peter Chiu
Add PCI device IDs to enable support for mt7990 chipsets. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-11-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: rework background radar check for mt7990StanleyYP Wang
The MT7990 comes in 2T2R and 3T3R variants, with only the 2T2R supporting background radar. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-10-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: connac: rework TX descriptor and TX free for mt7990Shayne Chen
Adjust the TX descriptor and TX free for updated hardware fields. This is a preliminary patch to support mt7990 chipset. Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-9-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: adjust HW capabilities for mt7990Peter Chiu
This is a preliminary patch to support mt7990 chipset. Co-developed-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-8-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: add eeprom support for mt7990StanleyYP Wang
Add eeprom definition and default bin file for mt7990. This is a preliminary patch to support mt7990 chipset. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-7-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: rework register mapping for mt7990StanleyYP Wang
Rework register offset and l1/l2/cbtop mapping for mt7990. This is a preliminary patch to support mt7990 chipset. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-6-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: rework DMA configuration for mt7990Peter Chiu
Modify DMA ring setting for mt7990. This is a preliminary patch to support mt7990 chipset. Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-5-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: rework WA mcu command for mt7990Peter Chiu
Since mt7990 lacks WA firmware, some WA commands are not supported or need to be refactored to use the SDO command. This is a preliminary patch to support mt7990 chipset. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-4-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: connac: add support to load firmware for mt7990StanleyYP Wang
Add firmware download support. Note that mt7990 does not have WA and DSP firmwares. This is a preliminary patch to support mt7990 chipset. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-3-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: add macros for pci device idsShayne Chen
The chipset name (i.e., brand name) used by the driver may cause confusion with the PCI device ID when adding support for new chipsets. | Chipset name | PCI device id | |--------------|----------------| | 7996 | 0x7990, 0x7991 | | 7992 | 0x7992, 0x799a | | 7990 | 0x7993, 0x799b | To prevent confusion, replace the code that directly uses the device ID with macros. This is a preliminary patch to support mt7990 chipset. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-2-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21can: dev: add struct data_bittiming_params to group FD parametersVincent Mailhol
This is a preparation patch for the introduction of CAN XL. CAN FD and CAN XL uses similar bittiming parameters. Add one level of nesting for all the CAN FD parameters. Typically: priv->can.data_bittiming; becomes: priv->can.fd.data_bittiming; This way, the CAN XL equivalent (to be introduced later) would be: priv->can.xl.data_bittiming; Add the new struct data_bittiming_params which contains all the data bittiming parameters, including the TDC and the callback functions. This done, update all the CAN FD drivers to make use of the new layout. Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250501171213.2161572-2-mailhol.vincent@wanadoo.fr [mkl: fix rcar_canfd] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21Merge patch series "Add support for RZ/G3E CANFD"Marc Kleine-Budde
Biju Das <biju.das.jz@bp.renesas.com> says: The CAN-FD module on RZ/G3E is very similar to the one on both R-Car V4H and RZ/G2L, but differs in some hardware parameters: * No external clock, but instead has ram clock. * Support up to 6 channels. * 20 interrupts. v8->v9: * Collected tags. * Added missing header bitfield.h. * Fixed logical error ch->BIT(ch) in rcar_canfd_global_error(). * Removed unneeded double space in rcar_canfd_setrnc(). * Updated commit description in patch#15. v7->v8: * Collected tags. * Updated commit description for patch#{5,9,15,16,17}. * Replaced the macro RCANFD_GERFL_EEF0_7->RCANFD_GERFL_EEF. * Dropped the redundant macro RCANFD_GERFL_EEF(ch). * Added patch for dropping the mask operation in RCANFD_GAFLCFG_SETRNC macro. * Converted RCANFD_GAFLCFG_SETRNC->rcar_canfd_setrnc(). * Updated RCANFD_GAFLCFG macro by replacing the parameter ch->w, where w is the GAFLCFG index used in the hardware manual. * Renamed the parameter x->page_num in RCANFD_GAFLECTR_AFLPN macro to make it clear. * Renamed the parameter x->cftml in RCANFD_CFCC_CFTML macro to make it clear. * Updated {rzg2l,car_gen3_hw_info} with ch_interface_mode = 0. * Updated {rzg2l,rcar_gen3}_hw_info with shared_can_regs = 0. * Started using struct rcanfd_regs instead of LUT for reg offsets. * Started using struct rcar_canfd_shift_data instead of LUT for shift data. * Renamed only_internal_clks->external_clk to avoid negation. * Updated rcar_canfd_hw_info tables with external_clk entries. * Replaced 10->sizeof(name) in scnprintf(). v6->v7: * Collected tags * Replaced 'aswell'->'as well' in patch#11 commit description. v5->v6: * Replaced RCANFD_RNC_PER_REG macro with rnc_stride variable. * Updated commit description for patch#7 and #8 * Dropped mask_table: AFLPN_MASK is replaced by max_aflpn variable. CFTML_MASK is replaced by max_cftml variable. BITTIMING MASK's are replaced by {nom,data}_bittiming variables. * Collected tag from Geert. v4->v5: * Collected tag from Geert. * The rules for R-Car Gen3/4 could be kept together, reducing the number of lines. Similar change for rzg2l-canfd aswell. * Keeping interrupts and resets together allows to keep a clear separation between RZ/G2L and RZ/G3E, at the expense of only a single line. * Retained the tags for binding patches as it is trivial changes. * Dropped the unused macro RCANFD_GAFLCFG_GETRNC. * Updated macro RCANFD_GERFL_ERR by using gpriv->channels_mask and dropped unused macro RCANFD_GERFL_EEF0_7. * Replaced RNC mask in RCANFD_GAFLCFG_SETRNC macro by using info->num_supported_rules variable. * Updated the macro RCANFD_GAFLCFG by using info->rnc_field_width variable. * Updated shift value in RCANFD_GAFLCFG_SETRNC macro by using a formula (32 - (n % rnc_per_reg + 1) * field_width). * Replaced the variable name shared_can_reg->shared_can_regs. * Improved commit description for patch{#11,#12}by replacing has->have. * Dropped RCANFD_EEF_MASK and RCANFD_RNC_MASK as it is taken care by gpriv->channels_mask and info->num_supported_rules. * Dropped RCANFD_FIRST_RNC_SH and RCANFD_SECOND_RNC_SH by using a formula (32 - (n % rnc_per_reg + 1) * rnc_field_width. * Improved commit description by "All SoCs supports extenal clock"-> "All existing SoCs support an external clock". * Updated error description in probe as "cannot get enabled ram clock" * Updated r9a09g047_hw_info table. v3->v4: * Added Rb tag from Rob for patch#2. * Added prefix RCANFD_* to enum rcar_canfd_reg_offset_id. * Added prefix RCANFD_* to enum rcar_canfd_mask_id. * Added prefix RCANFD_* to enum rcar_canfd_shift_id. v2->v3: * Collected tags. * Dropped reg_gen4() and is_gen4() by adding mask_table, shift_table, regs, ch_interface_mode and shared_can_reg variables to struct rcar_canfd_hw_info. v1->v2: * Split the series with fixes patch separately. * Added patch for Simplify rcar_canfd_probe() using of_get_available_child_by_name() as dependency patch hit on can-next. * Added Rb tag from Vincent Mailhol. * Dropped redundant comment from commit description for patch#3. Link: https://patch.msgid.link/20250417054320.14100-1-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Add RZ/G3E supportBiju Das
The CAN-FD IP found on the RZ/G3E SoC is similar to R-Car Gen4, but it has no external clock instead it has clk_ram, it has 6 channels and supports 20 interrupts. Add support for RZ/G3E CAN-FD driver. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-20-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Enhance multi_channel_irqs handlingBiju Das
Currently multi_channel_irqs has only 2 channels. But RZ/G3E has six channels. Enhance multi_channel_irqs handling to support more than two channels. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-19-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Add external_clk variable to struct rcar_canfd_hw_infoBiju Das
All existing SoCs support an external clock, but RZ/G3E has only internal clocks. Add external_clk variable to struct rcar_canfd_hw_info to handle this difference. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-18-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Add sh variable to struct rcar_canfd_hw_infoBiju Das
R-Car Gen3 and Gen4 have some differences in the shift bits. Introduce a struct rcar_canfd_shift_data to hold these values and add the struct rcar_canfd_shift_data variable sh to struct rcar_canfd_hw_info to handle these differences. After this, drop the unused functions reg_gen4() and is_gen4(). Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-17-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Add struct rcanfd_regs variable to struct rcar_canfd_hw_infoBiju Das
R-Car Gen3 and Gen4 have some differences in the register offsets. Add struct rcanfd_regs variable regs to the struct rcar_canfd_hw_info to handle these differences. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-16-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Add shared_can_regs variable to struct rcar_canfd_hw_infoBiju Das
R-Car Gen4 has shared regs for both CAN-FD and Classical CAN operations. Add shared_can_regs variable to struct rcar_canfd_hw_info to handle this difference. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-15-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Add ch_interface_mode variable to struct rcar_canfd_hw_infoBiju Das
R-Car Gen4 has channel specific interface mode bit for setting CAN-FD or Classical CAN mode whereas on R-Car Gen3 it is global. Add a ch_interface_mode variable to struct rcar_canfd_hw_info to handle this difference. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-14-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Add {nom,data}_bittiming variables to struct rcar_canfd_hw_infoBiju Das
Both R-Car Gen4 and R-Car Gen3 have different bit timing parameters Add {nom,data}_bittiming variables to struct rcar_canfd_hw_info to handle this difference. Since the mask used in the macros are max value - 1, replace that as well. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-13-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Add max_cftml variable to struct rcar_canfd_hw_infoBiju Das
R-Car Gen3 has CFTML max positional value is 15 whereas on R-Car Gen4 it is 31. Add a max_cftml variable to struct rcar_canfd_hw_info to handle this difference. While at it, rename the parameter x->cftml in RCANFD_CFCC_CFTML macro to make it clear. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-12-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Add max_aflpn variable to struct rcar_canfd_hw_infoBiju Das
R-Car Gen3 has maximum acceptance filter list page number of 31 whereas on R-Car Gen4 it is 127. Add max_aflpn variable to struct rcar_canfd_hw_info in order to support RZ/G3E that has max AFLPN of 63. While at it, rename the parameter x->page_num in RCANFD_GAFLECTR_AFLPN macro to make it clear. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-11-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Add rnc_field_width variable to struct rcar_canfd_hw_infoBiju Das
The shift and w value in rcar_canfd_setrnc() are dictated by the field width: - R-Car Gen4 packs 2 values in a 32-bit word, using a field width of 16 bits, - R-Car Gen3 packs up to 4 values in a 32-bit word, using a field width of 8 bits. Add rnc_field_width variable to struct rcar_canfd_hw_info to handle this difference. The rnc_stride is 32 / rnc_field_width and the index parameter w is calculated by ch / rnc_stride. The shift value in rcar_canfd_setrnc() is computed by using (32 - (ch % rnc_stride + 1) * rnc_field_width). Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-10-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Update RCANFD_GAFLCFG macroBiju Das
Update RCANFD_GAFLCFG macro by replacing the parameter ch->w, where w is the GAFLCFG index used in the hardware manual. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-9-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Add rcar_canfd_setrnc()Biju Das
Add rcar_canfd_setrnc() to replace the macro RCANFD_GAFLCFG_SETRNC. While at it, replace int->unsigned int for local variables offset, page and num_rules in rcar_canfd_configure_afl_rules(). Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-8-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-21can: rcar_canfd: Drop the mask operation in RCANFD_GAFLCFG_SETRNC macroBiju Das
Drop the mask operation in RCANFD_GAFLCFG_SETRNC macro as the num_rules can never be larger than number of supported rules. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250417054320.14100-7-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-09-12 11:08:48 +0000