summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-19[media] vpif: Consolidate formats from capture and displayMats Randgaard
- The ch_params tables in vpif_capture.c and vpif_display.c are moved to a common table in vpif.c. Then it is easier to maintain the table. - The field "fps" is removed from the struct vpif_channel_config_params because it is not used. Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by : Murali Karicheri <mkaricheri@gmail.com> Acked-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] vpif_cap/disp: Add debug functionalityMats Randgaard
The following functions are added to the drivers: - vpif_g_chip_ident - vpif_dbg_g_register - vpif_dbg_s_register - vpif_log_status Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] cpia2: convert .ioctl to .unlocked_ioctlHans Verkuil
Implement core-assisted locking in cpia2. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] saa7146: Convert from .ioctl to .unlocked_ioctlHans Verkuil
Convert saa7146 to use core-assisted locking. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] bttv: remove obsolete 'no_tda9875' fieldHans Verkuil
Since tda9875 is part of tvaudio this field no longer makes sense. Remove it. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] tda9875: remove duplicate driverHans Verkuil
In commit 411674fd189abe5910ea4caf08b7eac5c4a4d967 the tda9875 support was added to tvaudio. This means that tda9875 is no longer used since mid-2009. If there are out-of-tree users of this driver, then they can switch to tvaudio instead. The original commit message read as follows: This change allows bttv to use tvaudio for this device. Since this device has the same i2c address as the tda9874 we need to support both in the same tvaudio driver. This makes it possible for tvaudio to detect which chip is used. Originally the tda9875 was only available in the dedicated tda9875 driver, but that makes life very hard for bttv since loading tvaudio might misdetect a tda9875 as a tda9874. So there were good reasons for moving the tda9875 code into tvaudio. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19sched, cgroup: Use exit hook to avoid use-after-free crashPeter Zijlstra
By not notifying the controller of the on-exit move back to init_css_set, we fail to move the task out of the previous cgroup's cfs_rq. This leads to an opportunity for a cgroup-destroy to come in and free the cgroup (there are no active tasks left in it after all) to which the not-quite dead task is still enqueued. Reported-by: Miklos Vajna <vmiklos@frugalware.org> Fixed-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1293206353.29444.205.camel@laptop>
2011-01-19Merge branch 'for-2.6.38' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.38
2011-01-19sh: update INTC to clear IRQ sense valid flagMagnus Damm
Clear the valid flag is in the INTC code. Without this fix bit 7 of the sense register is mistakenly set. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-19x86: Unify "numa=" command line option handlingJan Beulich
In order to be able to suppress the use of SRAT tables that 32-bit Linux can't deal with (in one case known to lead to a non-bootable system, unless disabling ACPI altogether), move the "numa=" option handling to common code. Signed-off-by: Jan Beulich <jbeulich@novell.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Renninger <trenn@suse.de> LKML-Reference: <4D36B581020000780002D0FF@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-19Revert "ALSA: HDA: Create mixers on ALC887"Takashi Iwai
This reverts commit 03b7a1ab557efe34e8f79b78660e514bd7374248. This commit was mistakenly re-introduced. While the change is harmless (as ALC887 uses patch_alc888() now), we should get rid of any wrong code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-19Revert "x86: Make relocatable kernel work with new binutils"Ingo Molnar
This reverts commit 86b1e8dd83cb ("x86: Make relocatable kernel work with new binutils"). Markus Trippelsdorf reported a boot failure caused by this patch. The real solution to the original patch will likely involve an arch-generic solution to define an overlaid jiffies_64 and jiffies variables. Until that's done and tested on all architectures revert this commit to solve the regression. Reported-and-bisected-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: "Lu, Hongjiu" <hongjiu.lu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org>, Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <4D36A759.60704@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18ACPICA: Update version to 20110112Bob Moore
Version 20110112. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-18ACPICA: Update all ACPICA copyrights and signons to 2011Bob Moore
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-18ACPICA: Fix issues/fault with automatic "serialized" method supportLin Ming
History: This support changes a method to "serialized" on the fly if the method generates an AE_ALREADY_EXISTS error, indicating the possibility that it cannot handle reentrancy. This fix repairs a couple of issues seen in the field, especially on machines with many cores. 1) Delete method children only upon the exit of the last thread, so as to not delete objects out from under running threads. 2) Set the "serialized" bit for the method only upon the exit of the last thread, so as to not cause deadlock when running threads attempt to exit. 3) Cleanup the use of the AML "MethodFlags" and internal method flags so that there is no longer any confustion between the two. Reported-by: Dana Myers <dana.myers@oracle.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-18ACPICA: Debugger: Lock namespace for duration of a namespace dumpBob Moore
Prevents issues if the namespace is changing underneath the debugger. Especially temporary nodes, since the debugger displays these also. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Reviewed-by: Rafael Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-18ACPICA: Fix namespace race conditionDana Myers
Fixes a race condition between method execution and namespace walks that can possibly fault. Problem was apparently introduced in version 20100528 as a result of a performance optimization that reduces the number of namespace walks upon method exit by using the delete_namespace_subtree function instead of the delete_namespace_by_owner function used previously. Bug is in the delete_namespace_subtree function. Signed-off-by: Dana Myers <dana.myers@oracle.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Reviewed-by: Rafael Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-18ACPICA: Fix memory leak in acpi_ev_asynch_execute_gpe_method().Jesper Juhl
We will leak the memory allocated to 'local_gpe_event_info' if 'acpi_ut_acquire_mutex()' fails or if 'acpi_ev_valid_gpe_event()' fails in drivers/acpi/acpica/evgpe.c::acpi_ev_asynch_execute_gpe_method(). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Reviewed-by: Rafael Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-19sh: Fix sh build failure when CONFIG_SFC=mAurelien Jarno
CONFIG_SFC=m uses topology_core_cpumask() which, for sh, expects cpu_core_map to be exported. It is not. This patch exports the needed symbol. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-19ARM: mach-shmobile: mackerel: clarify shdi/mmcif switch settingsSimon Horman
* Pins 2 and 4 of switch 33 are documented as don't care on the PCB, my testing seems to confirm this. * I have been unable to do anything sensible with S1 set to on. Am I missing something with regards to MMC1? * Clarify which driver is needed for each switch setting. * Should the AP4 board code be updated to allow the SHDI driver to access SHDI1 as the mackerel code does? Signed-off-by: Simon Horman <horms@verge.net.au> Acked-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18gianfar: Fix misleading indentation in startup_gfar()Anton Vorontsov
Just stumbled upon the issue while looking for another bug. The code looks correct, the indentation is not. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18net/irda/sh_irda: return to RX mode when TX errorKuninori Morimoto
sh_irda can not use RX/TX in same time, but this driver didn't return to RX mode when TX error occurred. This patch care xmit error case to solve this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18net offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan.Jesse Gross
In netif_skb_features() we return only the features that are valid for vlans if we have a vlan packet. However, we should not mask out NETIF_F_HW_VLAN_TX since it enables transmission of vlan tags and is obviously valid. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18USB CDC NCM: tx_fixup() race condition fixAlexey Orishko
- tx_fixup() can be called from either timer callback or from xmit() in usbnet, so spinlock is added to avoid concurrency-related problem. - minor correction due to checkpatch warning for some line over 80 chars after previous patch was applied. Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18ns83820: Avoid bad pointer deref in ns83820_init_one().Jesper Juhl
In drivers/net/ns83820.c::ns83820_init_one() we dynamically allocate memory via alloc_etherdev(). We then call PRIV() on the returned storage which is 'return netdev_priv()'. netdev_priv() takes the pointer it is passed and adds 'ALIGN(sizeof(struct net_device), NETDEV_ALIGN)' to it and returns it. Then we test the resulting pointer for NULL, which it is unlikely to be at this point, and later dereference it. This will go bad if alloc_etherdev() actually returned NULL. This patch reworks the code slightly so that we test for a NULL pointer (and return -ENOMEM) directly after calling alloc_etherdev(). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18ipv6: Silence privacy extensions initializationRomain Francoise
When a network namespace is created (via CLONE_NEWNET), the loopback interface is automatically added to the new namespace, triggering a printk in ipv6_add_dev() if CONFIG_IPV6_PRIVACY is set. This is problematic for applications which use CLONE_NEWNET as part of a sandbox, like Chromium's suid sandbox or recent versions of vsftpd. On a busy machine, it can lead to thousands of useless "lo: Disabled Privacy Extensions" messages appearing in dmesg. It's easy enough to check the status of privacy extensions via the use_tempaddr sysctl, so just removing the printk seems like the most sensible solution. Signed-off-by: Romain Francoise <romain@orebokech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Update bnx2x version to 1.62.00-4Yaniv Rosner
Update bnx2x version to 1.62.00-4 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Fix AER setting for BCM57712Yaniv Rosner
Fix AER settings for BCM57712 to allow accessing all device addresses range in CL45 MDC/MDIO Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Fix BCM84823 LED behaviorYaniv Rosner
Fix BCM84823 LED behavior which may show on some systems Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Mark full duplex on some external PHYsYaniv Rosner
Device may show incorrect duplex mode for devices with external PHY Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Fix BCM8073/BCM8727 microcode loadingYaniv Rosner
Improve microcode loading verification before proceeding to next stage Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: LED fix for BCM8727 over BCM57712Yaniv Rosner
LED on BCM57712+BCM8727 systems requires different settings Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Common init will be executed only once after PORYaniv Rosner
Common init used to be called by the driver when the first port comes up, mainly to reset and reload external PHY microcode. However, in case management driver is active on the other port, traffic would halted. So limit the common init to be done only once after POR. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Swap BCM8073 PHY polarity if requiredYaniv Rosner
Enable controlling BCM8073 PN polarity swap through nvm configuration, which is required in certain systems Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18Linux 2.6.38-rc1Linus Torvalds
2011-01-19trusted-keys: avoid scattring va_end()Tetsuo Handa
We can avoid scattering va_end() within the va_start(); for (;;) { } va_end(); loop, assuming that crypto_shash_init()/crypto_shash_update() return 0 on success and negative value otherwise. Make TSS_authhmac()/TSS_checkhmac1()/TSS_checkhmac2() similar to TSS_rawhmac() by removing "va_end()/goto" from the loop. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-01-19trusted-keys: check for NULL before using itTetsuo Handa
TSS_rawhmac() checks for data != NULL before using it. We should do the same thing for TSS_authhmac(). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-01-19trusted-keys: another free memory bugfixTetsuo Handa
TSS_rawhmac() forgot to call va_end()/kfree() when data == NULL and forgot to call va_end() when crypto_shash_update() < 0. Fix these bugs by escaping from the loop using "break" (rather than "return"/"goto") in order to make sure that va_end()/kfree() are always called. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-01-18Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (lm93) Add support for LM94
2011-01-18Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Validate cpu early in perf_event_alloc() perf: Find_get_context: fix the per-cpu-counter check perf: Fix contexted inheritance
2011-01-18Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Clear irqstack thread_info x86: Make relocatable kernel work with new binutils
2011-01-18Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Malta: enable Cirrus FB console MIPS: add CONFIG_VIRTUALIZATION for virtio support MIPS: Implement __read_mostly MIPS: ath79: add common WMAC device for AR913X based boards MIPS: ath79: Add initial support for the Atheros AP81 reference board MIPS: ath79: add common SPI controller device SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs MIPS: ath79: add common GPIO buttons device MIPS: ath79: add common watchdog device MIPS: ath79: add common GPIO LEDs device MIPS: ath79: add initial support for the Atheros PB44 reference board MIPS: ath79: utilize the MIPS multi-machine support MIPS: ath79: add GPIOLIB support MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs MIPS: jump label: Add MIPS support. MIPS: Use WARN() in uasm for better diagnostics. MIPS: Optimize TLB handlers for Octeon CPUs MIPS: Add LDX and LWX instructions to uasm. MIPS: Use BBIT instructions in TLB handlers MIPS: Declare uasm bbit0 and bbit1 functions. ...
2011-01-18omap1: Fix sched_clock for the MPU timerTony Lindgren
Otherwise systems using the MPU timer will hang. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-18Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-01-18Merge branch 'fixes_a_2.6.38rc' of git://git.pwsan.com/linux-2.6 into omap-fixesTony Lindgren
2011-01-18hwmon: (lm93) Add support for LM94Guenter Roeck
This patch adds basic support for LM94 to the LM93 driver. LM94 specific sensors and features are not supported. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-01-18iwlwifi: fix valid chain reading from EEPROMWey-Yi Guy
When read valid tx/rx chains from EEPROM, there is a bug to use the tx chain value for both tx and rx, the result of this cause low receive throughput on 1x2 devices becuase rx will only utilize single chain instead of two chains Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-18ath5k: fix locking in tx_complete_poll_workBob Copeland
ath5k_reset must be called with sc->lock. Since the tx queue watchdog runs in a workqueue and accesses sc, it's appropriate to just take the lock over the whole function. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-18OMAP: PRCM: remove duplicated headersFelipe Balbi
A few headers are included twice, remove them. Found the following errors using make includecheck: arch/arm/mach-omap2/clock44xx_data.c: prm44xx.h is included more than once. arch/arm/mach-omap2/clockdomains44xx_data.c: cm1_44xx.h is included more than once. arch/arm/mach-omap2/clockdomains44xx_data.c: cm2_44xx.h is included more than once. arch/arm/mach-omap2/powerdomain2xxx_3xxx.c: prm-regbits-34xx.h is included more than once. Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Felipe Balbi <balbi@ti.com> [paul@pwsan.com: dropped lists from patch cc:s; tweaked subject line] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-01-18OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4Paul Walmsley
Commit 56a6a19dffda6b75cef8d4183c7c6ff650025cbd ("omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'") generates a lot of warnings on boot since clockdomain functions that manipulate wake-up dependencies are not implemented yet on OMAP4 for 2.6.38. This patch bypasses the OMAP2/3 functions on OMAP4, which in turn avoids the warnings when the functions would attempt to call the underlying OMAP2/3 PRCM functions. A one-line warning is still logged from the clockdomain code that the OMAP4 wake-up dependency code is not yet implemented. A clockdomain wake-up and sleep dependency implementation for OMAP4 from Rajendra should be possible to merge during the 2.6.39 merge window: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg41748.html http://www.mail-archive.com/linux-omap@vger.kernel.org/msg42222.html Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
generated by cgit (git 2.34.1) at 2025-09-16 05:06:41 +0000