summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-18sched, autogroup: Fix CONFIG_RT_GROUP_SCHED sched_setscheduler() failureMike Galbraith
If CONFIG_RT_GROUP_SCHED is set, __sched_setscheduler() fails due to autogroup not allocating rt_runtime. Free unused/unusable rt_se and rt_rq, redirect RT tasks to the root task group, and tell __sched_setscheduler() that it's ok. Reported-and-tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294890890.8089.39.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18sched: Display autogroup names in /proc/sched_debugBharata B Rao
Add autogroup name to cfs_rq and tasks information to /proc/sched_debug. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110111101257.GF4772@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18sched: Reinstate group names in /proc/sched_debugBharata B Rao
Displaying of group names in /proc/sched_debug was dropped in autogroup patches. Add group names while displaying cfs_rq and tasks information. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110111101153.GE4772@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18sched: Update effective_load() to use global share weightsPaul Turner
Previously effective_load would approximate the global load weight present on a group taking advantage of: entity_weight = tg->shares ( lw / global_lw ), where entity_weight was provided by tg_shares_up. This worked (approximately) for an 'empty' (at tg level) cpu since we would place boost load representative of what a newly woken task would receive. However, now that load is instantaneously updated this assumption is no longer true and the load calculation is rather incorrect in this case. Fix this (and improve the general case) by re-writing effective_load to take advantage of the new shares distribution code. Signed-off-by: Paul Turner <pjt@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110115015817.069769529@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18x86: Clear irqstack thread_infoBrian Gerst
Mathias Merz reported that v2.6.37 failed to boot on his system. Make sure that the thread_info part of the irqstack is initialized to zeroes. Reported-and-Tested-by: Matthias Merz <linux@merz-ka.de> Signed-off-by: Brian Gerst <brgerst@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <AANLkTimyKXfJ1x8tgwrr1hYnNLrPfgE1NTe4z7L6tUDm@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-01-18ARM: mach-shmobile: sh73a0 CPGA fix for IrDA MSTPMagnus Damm
Fix a typo for the sh73a0 CPGA code dealing with the IrDA hardware block on the AG5EVM board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: sh73a0 CPGA fix for FRQCRA M3Magnus Damm
Fix the M3 field offset for the FRQCRA register in the sh73a0 CPGA. It should be 12, not 8. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18drm/i915: set more FBC chicken bitsJesse Barnes
Add a couple of missing workaround bits for ILK & SNB. These disable clock gating on a couple of units that would otherwise prevent FBC from working. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-18x86: Make relocatable kernel work with new binutilsShaohua Li
The CONFIG_RELOCATABLE=y option is broken with new binutils, which will make boot panic. According to Lu Hongjiu, the affected binutils are from 2.20.51.0.12 to 2.21.51.0.3, which are release since Oct 22 this year. At least ubuntu 10.10 is using such binutils. See: http://sourceware.org/bugzilla/show_bug.cgi?id=12327 The reason of the boot panic is that we have 'jiffies = jiffies_64;' in vmlinux.lds.S. The jiffies isn't in any section. In kernel build, there is warning saying jiffies is an absolute address and can't be relocatable. At runtime, jiffies will have virtual address 0. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Lu Hongjiu<hongjiu.lu@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1295312269.1949.725.camel@sli10-conroe> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18Merge branch 'fix/hda' into for-linusTakashi Iwai
2011-01-18ALSA: hda - Fix initialization for HP 2011 notebooksVitaliy Kulikov
Fixes for HP 2011 notebooks: enable dock ports and disable BTL initialization in the driver. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-18ALSA: hda - Add support for VMware controllerBankim Bhavsar
Add the new PCI ID 0x15ad and device ID 0x1977 for VMware HDAudio Controller. [changed to use AZX_DRIVER_GENERIC by tiwai] Signed-off-by: Bankim Bhavsar <bbhavsar@vmware.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-18ALSA: hda - consitify string arraysTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-18ALSA: hda - Add add multi-streaming playback for AD1988Raymond Yau
Attached a patch which add a new model to support multi-streaming playback for ad1988. playback another stereo stream through the front panel headphone on device 2 while playback through the speakers connected to rear panel on device 0 at the same time. Tested with ad1988a rev2 codec on asus P5B-V motherboard. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-18autofs4: clean ->d_release() and autofs4_free_ino() upAl Viro
The latter is called only when both ino and dentry are about to be freed, so cleaning ->d_fsdata and ->dentry is pointless. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: split autofs4_init_ino()Al Viro
split init_ino into new_ino and clean_ino; the former is what used to be init_ino(NULL, sbi), the latter is for cases where we passed non-NULL ino. Lose unused arguments. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: mkdir and symlink always get a dentry that had passed lookupAl Viro
... so ->d_fsdata will have been set up before we get there Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: autofs4_get_inode() doesn't need autofs_info * argument anymoreAl Viro
Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: kill ->size in autofs_infoAl Viro
It's used only to pass the length of symlink body to autofs4_get_inode() in autofs4_dir_symlink(). We can bloody well set inode->i_size in autofs4_dir_symlink() directly and be done with that. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: pass mode to autofs4_get_inode() explicitlyAl Viro
In all cases we'd set inf->mode to know value just before passing it to autofs4_get_inode(). That kills the need to store it in autofs_info and pass it to autofs_init_ino() Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: autofs4_mkroot() is not different from autofs4_init_ino()Al Viro
Kill it. Mind you, it's been an obfuscated call of autofs4_init_ino() ever since 2.3.99pre6-4... Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: keep symlink body in inode->i_privateAl Viro
gets rid of all ->free()/->u.symlink machinery in autofs; we simply keep symlink bodies in inode->i_private and free them in ->evict_inode(). Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4 - fix debug print in autofs4_lookup()Ian Kent
oz_mode isn't defined any more, use autofs4_oz_mode(sbi) instead. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18vfs - fix dentry ref count in do_lookup()Ian Kent
There is a ref count problem in fs/namei.c:do_lookup(). When walking in ref-walk mode, if follow_managed() returns a fail we need to drop dentry and possibly vfsmount. Clean up properly, as we do in the other caller of follow_managed(). Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4 - fix get_next_positive_dentry()Ian Kent
The initialization condition in fs/autofs4/expire.c:get_next_positive_dentry() appears to be incorrect. If prev == NULL I believe that root should be returned. Further down, at the current dentry check for it being simple_positive() it looks like the d_lock for dentry p should be dropped instead of dentry ret, otherwise when p is assinged to ret we end up with no lock on p and a lost lock on ret, which leads to a deadlock. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18ARM: S5PV310: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5PV210: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6450: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6440: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6442: Enable I2S device to work on SMDK6442Jassi Brar
Add missing virtual ASoC DMA device. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18sh: fix MSIOF0 SPI on ecovec: it conflicts with VOUGuennadi Liakhovetski
MSIOF0 and VOU share pins on sh7724, make MSIOF0 available again, as long as VOU is not configured. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: remove sh7367 on-chip set_irq_type()Magnus Damm
set_irq_type() should only be used for external IRQ pins, so update the G3EVM board code to remove low level request. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: sh7372 INTCS MFIS2 interrupt updateMagnus Damm
Enable the MFIS2 interrupt source in the INTCS interrupt controller included in the sh7372 processor. The priority field is constantly enabled to let the interrupt through to both the ARM side and the SH side. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: ag5evm: Add IrDA supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-17Input: ct82710c - return proper error code for ct82c710_openDavidlohr Bueso
If request_irq() fails we should return the proper error instead of -1. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-17Input: bu21013_ts - added regulator supportNaveen Kumar Gaddipati
Add regulator support in ROHM BU21013 touch panel driver. Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-17Input: bu21013_ts - remove duplicate resolution parametersNaveen Kumar Gaddipati
Remove duplicate display resolution parameters from platform data as one pair is quite enough. Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-17Input: tnetv107x-ts - don't treat NULL clk as an errorJamie Iles
We should use IS_ERR() when checking whether clk_get() succeeded or not since it returns errors by encoding error codes with ERR_PTR(). Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-17Input: tnetv107x-keypad - don't treat NULL clk as an errorJamie Iles
We should use IS_ERR() when checking whether clk_get() succeeded or not since it returns errors by encoding error codes with ERR_PTR(). Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-18ARM: mach-shmobile: clock-sh7372: fixup pllc2 set_rateKuninori Morimoto
This patch fixup 421b446abeec55bed1251fab80cb5c12be58b773 - Care clk->rate - Don't over write PLLC2 enable bit Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18video: pxa3xx-gcu: Return -EFAULT when copy_from_user() failsaxel lin
Return -EFAULT instead of number of bytes that could not be copied if copy_from_user() fails. Also fix a typo in the comments. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18video: nuc900fb: properly free resources in nuc900fb_removeAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18video: nuc900fb: fix compile errorAxel Lin
This patch fixes below compile error: CC drivers/video/nuc900fb.o drivers/video/nuc900fb.c: In function 'nuc900fb_suspend': drivers/video/nuc900fb.c:726: error: too few arguments to function 'nuc900fb_stop_lcd' drivers/video/nuc900fb.c: In function 'nuc900fb_resume': drivers/video/nuc900fb.c:743: error: 'bfinfo' undeclared (first use in this function) drivers/video/nuc900fb.c:743: error: (Each undeclared identifier is reported only once drivers/video/nuc900fb.c:743: error: for each function it appears in.) make[2]: *** [drivers/video/nuc900fb.o] Error 1 make[1]: *** [drivers/video] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-17staging: fix build failure in bcm driverAndres Salomon
While building latest Linus git, I hit the following: CC [M] drivers/staging/bcm/Qos.o drivers/staging/bcm/Qos.c: In function ‘PruneQueue’: drivers/staging/bcm/Qos.c:367: error: ‘struct netdev_queue’ has no member named ‘tx_dropped’ drivers/staging/bcm/Qos.c: In function ‘flush_all_queues’: drivers/staging/bcm/Qos.c:416: error: ‘struct netdev_queue’ has no member named ‘tx_dropped’ make[5]: *** [drivers/staging/bcm/Qos.o] Error 1 make[4]: *** [drivers/staging/bcm] Error 2 make[3]: *** [drivers/staging] Error 2 As well as: CC [M] drivers/staging/bcm/Transmit.o drivers/staging/bcm/Transmit.c: In function ‘SetupNextSend’: drivers/staging/bcm/Transmit.c:163: error: ‘struct netdev_queue’ has no member named ‘tx_bytes’ drivers/staging/bcm/Transmit.c:164: error: ‘struct netdev_queue’ has no member named ‘tx_packets’ make[2]: *** [drivers/staging/bcm/Transmit.o] Error 1 tx_dropped/tx_bytes_tx_packets were removed in commit 1ac9ad13. This patch converts bcm to use net_device_stats instead of netdev_queue. Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Update workqueue usage RDMA/nes: Fix incorrect SFP+ link status detection on driver init RDMA/nes: Fix SFP+ link down detection issue with switch port disable RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE events RDMA/nes: Fix bonding on iw_nes IB/srp: Test only once whether iu allocation succeeded IB/mlx4: Handle protocol field in multicast table RDMA: Use vzalloc() to replace vmalloc()+memset(0) mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long) IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long)
2011-01-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (25 commits) Btrfs: forced readonly mounts on errors btrfs: Require CAP_SYS_ADMIN for filesystem rebalance Btrfs: don't warn if we get ENOSPC in btrfs_block_rsv_check btrfs: Fix memory leak in btrfs_read_fs_root_no_radix() btrfs: check NULL or not btrfs: Don't pass NULL ptr to func that may deref it. btrfs: mount failure return value fix btrfs: Mem leak in btrfs_get_acl() btrfs: fix wrong free space information of btrfs btrfs: make the chunk allocator utilize the devices better btrfs: restructure find_free_dev_extent() btrfs: fix wrong calculation of stripe size btrfs: try to reclaim some space when chunk allocation fails btrfs: fix wrong data space statistics fs/btrfs: Fix build of ctree Btrfs: fix off by one while setting block groups readonly Btrfs: Add BTRFS_IOC_SUBVOL_GETFLAGS/SETFLAGS ioctls Btrfs: Add readonly snapshots support Btrfs: Refactor btrfs_ioctl_snap_create() btrfs: Extract duplicate decompress code ...
2011-01-17Revert "mm: simplify code of swap.c"Linus Torvalds
This reverts commit d8505dee1a87b8d41b9c4ee1325cd72258226fbc. Chris Mason ended up chasing down some page allocation errors and pages stuck waiting on the IO scheduler, and was able to narrow it down to two commits: commit 744ed1442757 ("mm: batch activate_page() to reduce lock contention") and d8505dee1a87 ("mm: simplify code of swap.c"). This reverts the second one. Reported-and-debugged-by: Chris Mason <chris.mason@oracle.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jens Axboe <jaxboe@fusionio.com> Cc: linux-mm <linux-mm@kvack.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-17Revert "mm: batch activate_page() to reduce lock contention"Linus Torvalds
This reverts commit 744ed1442757767ffede5008bb13e0805085902e. Chris Mason ended up chasing down some page allocation errors and pages stuck waiting on the IO scheduler, and was able to narrow it down to two commits: commit 744ed1442757 ("mm: batch activate_page() to reduce lock contention") and d8505dee1a87 ("mm: simplify code of swap.c"). This reverts the first of them. Reported-and-debugged-by: Chris Mason <chris.mason@oracle.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jens Axboe <jaxboe@fusionio.com> Cc: linux-mm <linux-mm@kvack.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-17ath9k_hw: do PA offset calibration only on longcal intervalRajkumar Manoharan
The power detector adc offset calibration has to be done on 4 minutes interval (longcal * pa_skip_count). But the commit "ath9k_hw: fix a noise floor calibration related race condition" makes the PA calibration executed more frequently beased on nfcal_pending value. Running PAOffset calibration lesser than longcal interval doesn't help anything and the worse part is that it causes NF load timeouts and RX deaf conditions. In a very noisy environment, where the distance b/w AP & station is ~10 meter and running a downlink udp traffic with frequent background scan causes "Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x40d1a" and moves the chip into deaf state. This issue was originaly reported in Android platform where the network-manager application does bgscan more frequently on AR9271 chips. (AR9285 family usb device). Cc: stable@kernel.org Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-16 16:54:35 +0000