summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-07ideapad: add platform driver for ideapadIke Panhc
Create /sys/devices/platform/ideapad for nodes of ideapad landing. Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07fujitsu-laptop: fix compiler warning on pnp_idsNamhyung Kim
Annotate pnp_ids as '__used' to fix following warning: CC drivers/platform/x86/fujitsu-laptop.o drivers/platform/x86/fujitsu-laptop.c:1243: warning: ‘pnp_ids’ defined but not used Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07WMI: return error if wmi_create_device() failsDan Carpenter
The break resets the retval to 0 but we want to return an error code. This was introduced in c64eefd48c4 "WMI: embed struct device directly into wmi_block" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-07eeepc-wmi: never load if legacy device is enabledCorentin Chary
If legacy device (SB.ATKD - ASUS010) used by eeepc-laptop is enabled, don't allow eeepc-wmi to load because: - eeepc-laptop may be loaded, and can conflict with eeepc-wmi (they both try to register eeepc::touchpad led for example). - the WMI interface is inteded to be used when the OS is not detected as Win 7. And when this is the case, the ASUS010 device is disabled. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07eeepc-laptop: add a getter for touchpad ledCorentin Chary
Allow te get the current led state in a more accurate way. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07eeepc-wmi: remove unneeded staticCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07eeepc-wmi: claim eeepc-wmi maintainershipCorentin Chary
Since eeepc-wmi has currently no official maintainer, I claim maintainership of this driver, and add it to the acpi4asus project. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07eeepc-wmi: fix confusion between ctrl_param and retvalCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07eeepc-wmi: add debugfs entriesCorentin Chary
eeepc-wmi/ - debugfs root directory dev_id - current dev_id ctrl_param - current ctrl_param devs - call DEVS(dev_id, ctrl_param) and print result dsts - call DSTS(dev_id) and print result DEVS and DSTS are the main functions used in eeepc-wmi, this will allow to test new features without patching the drivers. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07eeepc-wmi: use attribute group to manage attributesCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07eeepc-wmi: add rfkill support for wlan, bluetooth and 3gCorentin Chary
wimax support is missing because I don't have any DSDT with WMI and wimax support. Most of the code comes from eeepc-laptop. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07eeepc-wmi: add touchpad led supportCorentin Chary
Most of the code comes from eeepc-laptop. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07eeepc-wmi: rework eeepc_wmi_init and eeepc_wmi_exitCorentin Chary
The old code was using platform_driver.probe to initialize eeepc_wmi context. That's a mistake because if probe fail, eeepc_platform_register() won't tell anyone, and chaos will happen. Wrap add and remove code inside eeepc_wmi_add() / eeepc_wmi_remove(), and try to use the static platform_device only in eeepc_wmi_init() and eeepc_wmi_exit() The code is now very similar to eeepc-laptop, except eeepc_laptop_add and eeepc_laptop_remove are called from acpi_driver, not module init/exit functions, but WMI doesn't provide such functionalities (yet ?). Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07classmate-laptop: add missing input_sync callHerton Ronaldo Krzesinski
Add missing input_sync call in cmpc_keys_handler function. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
2011-01-07classmate-laptop: little optimization for cmpc_rfkill_blockHerton Ronaldo Krzesinski
We don't need to call bios/acpi (cmpc_set_rfkill_wlan) if the blocked state is already set to the same value (little optimization). This can happen for example if we initialize the module with same initial hardware state (rfkill core always call cmpc_rfkill_block on initialization here). Also GWRI method only accepts 0 or 1 for setting rfkill block, as can be seen on AML code from acpidump->DSDT from a classmate sample I have, so should be fine setting state only to 0 or 1 directly. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
2011-01-07WMI: Cater for multiple events with same GUIDColin King
WMI data blocks can contain WMI events with the same GUID but with different notifiy_ids, for example volume up/down hotkeys. This patch enables a single event handler to be registered and unregistered against all events with same GUID but different notify_ids. Since an event handler is passed the notify_id of an event it can can differentiate between the different events. The patch also ensures we only register and unregister a device per unique GUID. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07drivers/platform/x86: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07intel_scu_ipc: Utility driver for intel scu ipcSreedhara DS
This driver implements ioctl and interfaces with intel scu ipc driver. It is used to access pmic/msic registers from user space and firmware update utility. Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com> [Extensive clean up and debug] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07deb-pkg: s/hdr/kernel_headers_/ && s/header/libc_headers_/maximilian attems
hdrpackage and headerpackage are not intuitive names, use proposed alternatives by Michel Marek. While touching them move the mkdir of the kernel_headers dir up and fix it for paranoid umask. CC: Theodore Ts'o <tytso@mit.edu> Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-07Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
2011-01-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (147 commits) [SCSI] arcmsr: fix write to device check [SCSI] lpfc: lower stack use in lpfc_fc_frame_check [SCSI] eliminate an unnecessary local variable from scsi_remove_target() [SCSI] libiscsi: use bh locking instead of irq with session lock [SCSI] libiscsi: do not take host lock in queuecommand [SCSI] be2iscsi: fix null ptr when accessing task hdr [SCSI] be2iscsi: fix gfp use in alloc_pdu [SCSI] libiscsi: add more informative failure message during iscsi scsi eh [SCSI] gdth: Add missing call to gdth_ioctl_free [SCSI] bfa: remove unused defintions and misc cleanups [SCSI] bfa: remove inactive functions [SCSI] bfa: replace bfa_assert with WARN_ON [SCSI] qla2xxx: Use sg_next to fetch next sg element while walking sg list. [SCSI] qla2xxx: Fix to avoid recursive lock failure during BSG timeout. [SCSI] qla2xxx: Remove code to not reset ISP82xx on failure. [SCSI] qla2xxx: Display mailbox register 4 during 8012 AEN for ISP82XX parts. [SCSI] qla2xxx: Don't perform a BIG_HAMMER if Get-ID (0x20) mailbox command fails on CNAs. [SCSI] qla2xxx: Remove redundant module parameter permission bits [SCSI] qla2xxx: Add sysfs node for displaying board temperature. [SCSI] qla2xxx: Code cleanup to remove unwanted comments and code. ...
2011-01-07tracing: Include module.h in define_trace.hSteven Rostedt
While doing some developing, Peter Zijlstra and I have found that if a CREATE_TRACE_POINTS include is done before module.h is included, it can break the build. We have been lucky so far that this has not broke the build since module.h is included in almost everything. Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-01-07input/tc3589x: fix compile errorDan Carpenter
There was a semi-colon missing and it broke the compile. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-07spi/omap: Fix DMA API usage in OMAP MCSPI driverRussell King - ARM Linux
Running the latest kernel on the 4430SDP board with DMA API debugging enabled results in this: WARNING: at lib/dma-debug.c:803 check_unmap+0x19c/0x6f0() NULL NULL: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000008129901a] [size=260 bytes] Modules linked in: Backtrace: [<c003cbe0>] (dump_backtrace+0x0/0x10c) from [<c0278da8>] (dump_stack+0x18/0x1c) r7:c1839dc0 r6:c0198578 r5:c0304b17 r4:00000323 [<c0278d90>] (dump_stack+0x0/0x1c) from [<c005b158>] (warn_slowpath_common+0x58/0x70) [<c005b100>] (warn_slowpath_common+0x0/0x70) from [<c005b214>] (warn_slowpath_fmt+0x38/0x40) r8:c1839e40 r7:00000000 r6:00000104 r5:00000000 r4:8129901a [<c005b1dc>] (warn_slowpath_fmt+0x0/0x40) from [<c0198578>] (check_unmap+0x19c/0x6f0) r3:c03110de r2:c0304e6b [<c01983dc>] (check_unmap+0x0/0x6f0) from [<c0198cd8>] (debug_dma_unmap_page+0x74/0x80) [<c0198c64>] (debug_dma_unmap_page+0x0/0x80) from [<c01d5ad8>] (omap2_mcspi_work+0x514/0xbf0) [<c01d55c4>] (omap2_mcspi_work+0x0/0xbf0) from [<c006dfb0>] (process_one_work+0x294/0x400) [<c006dd1c>] (process_one_work+0x0/0x400) from [<c006e50c>] (worker_thread+0x220/0x3f8) [<c006e2ec>] (worker_thread+0x0/0x3f8) from [<c00738d0>] (kthread+0x88/0x90) [<c0073848>] (kthread+0x0/0x90) from [<c005e924>] (do_exit+0x0/0x5fc) r7:00000013 r6:c005e924 r5:c0073848 r4:c1829ee0 ---[ end trace 1b75b31a2719ed20 ]--- I've no idea why this driver uses NULL for dma_unmap_single instead of the &spi->dev that is laying around just waiting to be used in that function - but it's an easy fix. Also replace this comment with a FIXME comment: /* Do DMA mapping "early" for better error reporting and * dcache use. Note that if dma_unmap_single() ever starts * to do real work on ARM, we'd need to clean up mappings * for previous transfers on *ALL* exits of this loop... */ as the comment is not true - we do work in dma_unmap() functions, particularly on ARMv6 and above. I've corrected the existing unmap functions but if any others are required they must be added ASAP. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-07Pull misc2.6.38 into release branchTony Luck
2011-01-07[IA64] Avoid array overflow if there are too many cpus in SRAT tableTony Luck
acpi_numa_init() has to parse the whole SRAT table, even if the kernel wants to limit the number of cpus it will use (because the ones it is going to use may be described by entries at the end of the SRAT table). Avoid overflowing the node_cpuid array. Reported-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-01-07spi/imx: correct the test on platform_get_irq() return valueRichard Genoud
The test "if (spi_imx->irq <= 0)" is not testing the IRQ value, but the return value of platform_get_irq(). As platform_get_irq() can return an error (-ENXIO) or the IRQ value it found, the test should be "if (spi_imx->irq < 0)" [grant.likely: Note: In general, Linux irq number 0 should also mean no irq, but arm still allows devices to be assigned 0, and the imx platform uses 0 for one of the spi devices, so this patch is needed for the device to work] Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-07Merge branch 'vfs-scale-working' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin * 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin: (57 commits) fs: scale mntget/mntput fs: rename vfsmount counter helpers fs: implement faster dentry memcmp fs: prefetch inode data in dcache lookup fs: improve scalability of pseudo filesystems fs: dcache per-inode inode alias locking fs: dcache per-bucket dcache hash locking bit_spinlock: add required includes kernel: add bl_list xfs: provide simple rcu-walk ACL implementation btrfs: provide simple rcu-walk ACL implementation ext2,3,4: provide simple rcu-walk ACL implementation fs: provide simple rcu-walk generic_check_acl implementation fs: provide rcu-walk aware permission i_ops fs: rcu-walk aware d_revalidate method fs: cache optimise dentry and inode for rcu-walk fs: dcache reduce branches in lookup path fs: dcache remove d_mounted fs: fs_struct use seqlock fs: rcu-walk for path lookup ...
2011-01-07x86: Save rbp in pt_regs on irq entryFrederic Weisbecker
From the x86_64 low level interrupt handlers, the frame pointer is saved right after the partial pt_regs frame. rbp is not supposed to be part of the irq partial saved registers, but it only requires to extend the pt_regs frame by 8 bytes to do so, plus a tiny stack offset fixup on irq exit. This changes a bit the semantics or get_irq_entry() that is supposed to provide only the value of caller saved registers and the cpu saved frame. However it's a win for unwinders that can walk through stack frames on top of get_irq_regs() snapshots. A noticeable impact is that it makes perf events cpu-clock and task-clock events based callchains working on x86_64. Let's then save rbp into the irq pt_regs. As a result with: perf record -e cpu-clock perf bench sched messaging perf report --stdio Before: 20.94% perf [kernel.kallsyms] [k] lock_acquire | --- lock_acquire | |--44.01%-- __write_nocancel | |--43.18%-- __read | |--6.08%-- fork | create_worker | |--0.88%-- _dl_fixup | |--0.65%-- do_lookup_x | |--0.53%-- __GI___libc_read --4.67%-- [...] After: 19.23% perf [kernel.kallsyms] [k] __lock_acquire | --- __lock_acquire | |--97.74%-- lock_acquire | | | |--21.82%-- _raw_spin_lock | | | | | |--37.26%-- unix_stream_recvmsg | | | sock_aio_read | | | do_sync_read | | | vfs_read | | | sys_read | | | system_call | | | __read | | | | | |--24.09%-- unix_stream_sendmsg | | | sock_aio_write | | | do_sync_write | | | vfs_write | | | sys_write | | | system_call | | | __write_nocancel v2: Fix cfi annotations. Reported-by: Soeren Sandmann Pedersen <sandmann@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Jan Beulich <JBeulich@novell.com>
2011-01-07x86, dumpstack: Fix unused variable warningRakib Mullick
In dump_stack function, bp isn't used anymore, which is introduced by commit 9c0729dc8062bed96189bd14ac6d4920f3958743. This patch removes bp completely. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Cc: Soeren Sandmann <sandmann@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <AANLkTik9U_Z0WSZ7YjrykER_pBUfPDdgUUmtYx=R74nL@mail.gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2011-01-07deb-pkg: Make deb-pkg generate a seperate linux-libc-dev debmaximilian attems
userland dev likes latest incarnation of that userland API. make it easy to also build it on make deb-pkg invocation: dpkg-deb: building package `linux-libc-dev' in `../linux-libc-dev_2.6.32-rc6-4_amd64.deb'. Last year patch rebased on top of latest deb-pkg changes. Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-07xen: HVM X2APIC supportSheng Yang
This patch is similiar to Gleb Natapov's patch for KVM, which enable the hypervisor to emulate x2apic feature for the guest. By this way, the emulation of lapic would be simpler with x2apic interface(MSR), and faster. [v2: Re-organized 'xen_hvm_need_lapic' per Ian Campbell suggestion] Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-07apic: Move hypervisor detection of x2apic to hypervisor.hSheng Yang
Then we can reuse it for Xen later. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Avi Kivity <avi@redhat.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-07sched: Constify function scope static struct sched_param usagePeter Zijlstra
Function-scope statics are discouraged because they are easily overlooked and can cause subtle bugs/races due to their global (non-SMP safe) nature. Linus noticed that we did this for sched_param - at minimum make the const. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: Message-ID: <AANLkTinotRxScOHEb0HgFgSpGPkq_6jKTv5CfvnQM=ee@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07sched: Fix strncmp operationHillf Danton
One of the operands, buf, is incorrect, since it is stripped and the correct address for subsequent string comparing could change if leading white spaces, if any, are removed from buf. It is fixed by replacing buf with cmp. Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <AANLkTinOPuYsVovrZpbuCCmG5deEyc8WgA_A1RJx_YK7@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07sched: Move sched_autogroup_exit() to free_signal_struct()Mike Galbraith
Per Oleg's suggestion, undo fork failure free/put_signal_struct change, and move sched_autogroup_exit() to free_signal_struct() instead. Signed-off-by: Mike Galbraith <efault@gmx.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294222564.8369.6.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07sched: Fix struct autogroup memory leakMike Galbraith
Seems I lost a change somewhere, leaking memory. sched: fix struct autogroup memory leak Add missing change to actually use autogroup_free(). Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294222285.8369.2.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07sched: Mark autogroup_init() __initYong Zhang
autogroup_init() is only called at boot time. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294375425-31065-1-git-send-email-yong.zhang0@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07sched: Consolidate the name of root_task_group and init_task_groupYong Zhang
root_task_group is the leftover of USER_SCHED, now it's always same to init_task_group. But as Mike suggested, root_task_group is maybe the suitable name to keep for a tree. So in this patch: init_task_group --> root_task_group init_task_group_load --> root_task_group_load INIT_TASK_GROUP_LOAD --> ROOT_TASK_GROUP_LOAD Suggested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110107071736.GA32635@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07nconf: handle comment entries within choice/endchoicePeter Korsgaard
Equivalent to af6c1598 (kconfig: handle comment entries within choice/endchoice), but for nconfig instead. Implement support for comment entries within choice groups. Comment entries are displayed visually distinct from normal configs, and selecting them is a no-op. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-07x86, NMI: Clean-up default_do_nmi()Don Zickus
Just re-arrange the code a bit to make it easier to follow what is going on. Basically un-negating the if-statement and swapping the code inside the if-statement with code outside. No functional changes. Originally-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-7-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPUDon Zickus
In original NMI handler, NMI reason io port (0x61) is only processed on BSP. This makes it impossible to hot-remove BSP. To solve the issue, a raw spinlock is used to allow the port to be processed on any CPU. Originally-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-6-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Remove DIE_NMI_IPIDon Zickus
With priorities in place and no one really understanding the difference between DIE_NMI and DIE_NMI_IPI, just remove DIE_NMI_IPI and convert everyone to DIE_NMI. This also simplifies default_do_nmi() a little bit. Instead of calling the die_notifier in both the if and else part, just pull it out and call it before the if-statement. This has the side benefit of avoiding a call to the ioport to see if there is an external NMI sitting around until after the (more frequent) internal NMIs are dealt with. Patch-Inspired-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-5-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Add priorities to handlersDon Zickus
In order to consolidate the NMI die_chain events, we need to setup the priorities for the die notifiers. I started by defining a bunch of common priorities that can be used by the notifier blocks. Then I modified the notifier blocks to use the newly created priorities. Now that the priorities are straightened out, it should be easier to remove the event DIE_NMI_IPI. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-4-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86: Convert some devices to use DIE_NMIUNKNOWNDon Zickus
They are a handful of places in the code that register a die_notifier as a catch all in case no claims the NMI. Unfortunately, they trigger on events like DIE_NMI and DIE_NMI_IPI, which depending on when they registered may collide with other handlers that have the ability to determine if the NMI is theirs or not. The function unknown_nmi_error() makes one last effort to walk the die_chain when no one else has claimed the NMI before spitting out messages that the NMI is unknown. This is a better spot for these devices to execute any code without colliding with the other handlers. The two drivers modified are only compiled on x86 arches I believe, so they shouldn't be affected by other arches that may not have DIE_NMIUNKNOWN defined. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Russ Anderson <rja@sgi.com> Cc: Corey Minyard <minyard@acm.org> Cc: openipmi-developer@lists.sourceforge.net Cc: dann frazier <dannf@hp.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Add NMI symbol constants and rename memory parity to PCI SERRHuang Ying
Replace the NMI related magic numbers with symbol constants. Memory parity error is only valid for IBM PC-AT, newer machine use bit 7 (0x80) of 0x61 port for PCI SERR. While memory error is usually reported via MCE. So corresponding function name and kernel log string is changed. But on some machines, PCI SERR line is still used to report memory errors. This is used by EDAC, so corresponding EDAC call is reserved. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07perf_events: Add perf_event_time()Stephane Eranian
Adds perf_event_time() to try and centralize access to event timing and in particular ctx->time. Prepares for cgroup support. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d22059c.122ae30a.5e0e.ffff8b8b@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07perf_events: Generalize use of event_filter_match()Stephane Eranian
Replace all occurrences of: event->cpu != -1 && event->cpu == smp_processor_id() by a call to: event_filter_match(event) This makes the code more consistent and will make the cgroup patch smaller. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d220593.2308e30a.48c5.ffff8ae9@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07perf_events: Move code around to prepare for cgroupStephane Eranian
In particular this patch move perf_event_exit_task() before cgroup_exit() to allow for cgroup support. The cgroup_exit() function detaches the cgroups attached to a task. Other movements include hoisting some definitions and inlines at the top of perf_event.c Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d22058b.cdace30a.4657.ffff95b1@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07mkuboot.sh: Fail if mkimage is missingRoland Stigge
on building an uImage, I get: $ make uImage CHK include/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/mach-types.h' is up to date. CALL scripts/checksyscalls.sh CHK include/generated/compile.h Kernel: arch/arm/boot/Image is ready SHIPPED arch/arm/boot/compressed/lib1funcs.S AS arch/arm/boot/compressed/lib1funcs.o LD arch/arm/boot/compressed/vmlinux OBJCOPY arch/arm/boot/zImage Kernel: arch/arm/boot/zImage is ready UIMAGE arch/arm/boot/uImage "mkimage" command not found - U-Boot images will not be built Image arch/arm/boot/uImage is ready $ I.e. it says: "uImage is ready" even though the uImage file doesn't exist because mkimage is missing. I propose the attached patch. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Michal Marek <mmarek@suse.cz>
generated by cgit (git 2.34.1) at 2025-09-14 05:36:21 +0000