summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-05irqchip/apple-aic: Move over to core ipi-muxMarc Zyngier
Now that the complexity of the AIC IPI mux has been copied into the core code for the benefit of the riscv architecture, shrink the AIC driver by the same amount by using that infrastructure. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Acked-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20230103141221.772261-10-apatel@ventanamicro.com
2023-02-05genirq: Add mechanism to multiplex a single HW IPIAnup Patel
All RISC-V platforms have a single HW IPI provided by the INTC local interrupt controller. The HW method to trigger INTC IPI can be through external irqchip (e.g. RISC-V AIA), through platform specific device (e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call). To support multiple IPIs on RISC-V, add a generic IPI multiplexing mechanism which help us create multiple virtual IPIs using a single HW IPI. This generic IPI multiplexing is inspired by the Apple AIC irqchip driver and it is shared by various RISC-V irqchip drivers. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Hector Martin <marcan@marcan.st> Tested-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230103141221.772261-4-apatel@ventanamicro.com
2023-02-05irqchip/loongson-liointc: Save/restore int_edge/int_pol registers during S3/S4Huacai Chen
If int_edge/int_pol registers are configured to not be the default values, we should save/restore them during S3/S4. Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221207140643.1600743-1-chenhuacai@loongson.cn
2023-02-05irqchip/aspeed-scu-ic: Correctly initialise status and enable registersRyan Chen
The status and enable registers are never initialised with sensible default values. Fix those. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> [maz: commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230130085430.635583-1-ryan_chen@aspeedtech.com
2023-02-04Merge tag 'powerpc-6.2-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "It's a bit of a big batch for rc6, but just because I didn't send any fixes the last week or two while I was on vacation, next week should be quieter: - Fix a few objtool warnings since we recently enabled objtool. - Fix a deadlock with the hash MMU vs perf record. - Fix perf profiling of asynchronous interrupt handlers. - Revert the IMC PMU nest_init_lock to being a mutex. - Two commits fixing problems with the kexec_file FDT size estimation. - Two commits fixing problems with strict RWX vs kernels running at non-zero. - Reconnect tlb_flush() to hash__tlb_flush() Thanks to Kajol Jain, Nicholas Piggin, Sachin Sant Sathvika Vasireddy, and Sourabh Jain" * tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush() powerpc/kexec_file: Count hot-pluggable memory in FDT estimate powerpc/64s/radix: Fix RWX mapping with relocated kernel powerpc/64s/radix: Fix crash with unaligned relocated kernel powerpc/kexec_file: Fix division by zero in extra size estimation powerpc/imc-pmu: Revert nest_init_lock to being a mutex powerpc/64: Fix perf profiling asynchronous interrupt handlers powerpc/64s: Fix local irq disable when PMIs are disabled powerpc/kvm: Fix unannotated intra-function call warning powerpc/85xx: Fix unannotated intra-function call warning
2023-02-04Merge tag 'rtc-6.2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "Here are a few fixes for 6.2. The EFI one is the most important as it allows some RTCs to actually work. The other two are warnings that are worth fixing. - efi: make WAKEUP services optional - sunplus: fix format string warning" * tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: sunplus: fix format string for printing resource dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property rtc: efi: Enable SET/GET WAKEUP services as optional
2023-02-04Merge tag 'kbuild-fixes-v6.2-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix two bugs (for building and for signing) when MODULE_SIG_KEY contains a PKCS#11 URI * tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: modinst: Fix build error when CONFIG_MODULE_SIG_KEY is a PKCS#11 URI certs: Fix build error when PKCS#11 URI contains semicolon
2023-02-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM64: - Yet another fix for non-CPU accesses to the memory backing the VGICv3 subsystem - A set of fixes for the setlftest checking for the S1PTW behaviour after the fix that went in ealier in the cycle" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: aarch64: Test read-only PT memory regions KVM: selftests: aarch64: Fix check of dirty log PT write KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs KVM: selftests: aarch64: Relax userfaultfd read vs. write checks KVM: arm64: Allow no running vcpu on saving vgic3 pending table KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status KVM: arm64: Add helper vgic_write_guest_lock()
2023-02-04Merge tag 'parisc-for-6.2-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Fix PTRACE_GETREGS/PTRACE_SETREGS for 32-bit userspace on a 64-bit kernel - pdc_iodc_print() dropped chars for newline in strings - Drop constants in favour of PRIV_USER - use safer strscpy() function in pdc_stable driver * tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c parisc: Fix return code of pdc_iodc_print() parisc: pdc_stable: use strscpy() to instead of strncpy()
2023-02-04Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC mailing list update from Stafford Horne: "The old mailing list for OpenRISC died due to some infrastructure issues and the people in charge decided not to keep it running. We have migrated this and the users over to kernel.org infrastructure. Sending this out now to avoid kernel developers getting lots of bounced mails for using the old list" * tag 'for-linus' of https://github.com/openrisc/linux: MAINTAINERS: Update OpenRISC mailing list
2023-02-04Merge tag 'kvmarm-fixes-6.2-3' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.2, take #3 - Yet another fix for non-CPU accesses to the memory backing the VGICv3 subsystem - A set of fixes for the setlftest checking for the S1PTW behaviour after the fix that went in ealier in the cycle
2023-02-04fbcon: Check font dimension limitsSamuel Thibault
blit_x and blit_y are u32, so fbcon currently cannot support fonts larger than 32x32. The 32x32 case also needs shifting an unsigned int, to properly set bit 31, otherwise we get "UBSAN: shift-out-of-bounds in fbcon_set_font", as reported on: http://lore.kernel.org/all/IA1PR07MB98308653E259A6F2CE94A4AFABCE9@IA1PR07MB9830.namprd07.prod.outlook.com Kernel Branch: 6.2.0-rc5-next-20230124 Kernel config: https://drive.google.com/file/d/1F-LszDAizEEH0ZX0HcSR06v5q8FPl2Uv/view?usp=sharing Reproducer: https://drive.google.com/file/d/1mP1jcLBY7vWCNM60OMf-ogw-urQRjNrm/view?usp=sharing Reported-by: Sanan Hasanov <sanan.hasanov@Knights.ucf.edu> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Fixes: 2d2699d98492 ("fbcon: font setting should check limitation of driver") Cc: stable@vger.kernel.org Tested-by: Miko Larsson <mikoxyzzz@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Helge Deller <deller@gmx.de>
2023-02-03Merge branch 'ionic-code-maintenance'Jakub Kicinski
Shannon Nelson says: ==================== ionic: code maintenance These are a few fixes for a hardware bug, a couple of sw bugs, and a little code cleanup. ==================== Link: https://lore.kernel.org/r/20230202215537.69756-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03ionic: missed doorbell workaroundAllen Hubbe
In one version of the HW there is a remote possibility that it will miss the doorbell ring. This adds a bit of protection to be sure we don't stall a queue from a missed doorbell. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Allen Hubbe <allen.hubbe@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03ionic: clear up notifyq alloc commentaryShannon Nelson
Make sure the q+cq alloc for NotifyQ is clearly documented and don't bother with unnecessary local variables. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03ionic: clean interrupt before enabling queue to avoid credit raceNeel Patel
Clear the interrupt credits before enabling the queue rather than after to be sure that the enabled queue starts at 0 and that we don't wipe away possible credits after enabling the queue. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Neel Patel <neel.patel@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal PHYHeiner Kallweit
Jerome provided the information that also the GXL internal PHY doesn't support MMD register access and EEE. MMD reads return 0xffff, what results in e.g. completely wrong ethtool --show-eee output. Therefore use the MMD dummy stubs. Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement") Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/84432fe4-0be4-bc82-4e5c-557206b40f56@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03net: macb: Perform zynqmp dynamic configuration only for SGMII interfaceRadhey Shyam Pandey
In zynqmp platforms where firmware supports dynamic SGMII configuration but has other non-SGMII ethernet devices, it fails them with no packets received at the RX interface. To fix this behaviour perform SGMII dynamic configuration only for the SGMII phy interface. Fixes: 32cee7818111 ("net: macb: Add zynqmp SGMII dynamic configuration support") Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reported-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1675340779-27499-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03bonding: fix error checking in bond_debug_reregister()Qi Zheng
Since commit ff9fb72bc077 ("debugfs: return error values, not NULL") changed return value of debugfs_rename() in error cases from %NULL to %ERR_PTR(-ERROR), we should also check error values instead of NULL. Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20230202093256.32458-1-zhengqi.arch@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03revert "squashfs: harden sanity check in squashfs_read_xattr_id_table"Andrew Morton
This fix was nacked by Philip, for reasons identified in the email linked below. Link: https://lkml.kernel.org/r/68f15d67-8945-2728-1f17-5b53a80ec52d@squashfs.org.uk Fixes: 72e544b1b28325 ("squashfs: harden sanity check in squashfs_read_xattr_id_table") Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Fedor Pchelkin <pchelkin@ispras.ru> Cc: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03fsdax: dax_unshare_iter() should return a valid lengthShiyang Ruan
The copy_mc_to_kernel() will return 0 if it executed successfully. Then the return value should be set to the length it copied. [akpm@linux-foundation.org: don't mess up `ret', per Matthew] Link: https://lkml.kernel.org/r/1675341227-14-1-git-send-email-ruansy.fnst@fujitsu.com Fixes: d984648e428b ("fsdax,xfs: port unshare to fsdax") Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03mm/gup: add folio to list when folio_isolate_lru() succeedKuan-Ying Lee
If we call folio_isolate_lru() successfully, we will get return value 0. We need to add this folio to the movable_pages_list. Link: https://lkml.kernel.org/r/20230131063206.28820-1-Kuan-Ying.Lee@mediatek.com Fixes: 67e139b02d99 ("mm/gup.c: refactor check_and_migrate_movable_pages()") Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Andrew Yang <andrew.yang@mediatek.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03aio: fix mremap after fork null-derefSeth Jenkins
Commit e4a0d3e720e7 ("aio: Make it possible to remap aio ring") introduced a null-deref if mremap is called on an old aio mapping after fork as mm->ioctx_table will be set to NULL. [jmoyer@redhat.com: fix 80 column issue] Link: https://lkml.kernel.org/r/x49sffq4nvg.fsf@segfault.boston.devel.redhat.com Fixes: e4a0d3e720e7 ("aio: Make it possible to remap aio ring") Signed-off-by: Seth Jenkins <sethjenkins@google.com> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Jann Horn <jannh@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03mailmap: add entry for Alexander MikhalitsynAlexander Mikhalitsyn
My old email <alexander.mikhalitsyn@virtuozzo.com> isn't working anymore. Link: https://lkml.kernel.org/r/20230131123456.192657-1-aleksandr.mikhalitsyn@canonical.com Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03mm: extend max struct page size for kmsanArnd Bergmann
After x86 enabled support for KMSAN, it has become possible to have larger 'struct page' than was expected when commit 5470dea49f53 ("mm: use mm_zero_struct_page from SPARC on all 64b architectures") was merged: include/linux/mm.h:156:10: warning: no case matching constant switch condition '96' switch (sizeof(struct page)) { Extend the maximum accordingly. Link: https://lkml.kernel.org/r/20230130130739.563628-1-arnd@kernel.org Fixes: 5470dea49f53 ("mm: use mm_zero_struct_page from SPARC on all 64b architectures") Fixes: 4ca8cc8d1bbe ("x86: kmsan: enable KMSAN builds for x86") Fixes: f80be4571b19 ("kmsan: add KMSAN runtime core") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03arm64: dts: qcom: sc7280: Add a herobrine CRD Pro SKURajendra Nayak
Some of the qualcomm qcard based herobrine devices can come with a Pro variant of the chipset on the qcard. Such Pro qcards have the smps9 from pm8350c ganged up with smps7 and smps8, so add a .dtsi for pro skus that deletes the smps9 node and include it from the new dts for the CRD Pro Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221216112918.1243-2-quic_rjendra@quicinc.com
2023-02-03dt-bindings: arm: qcom: Document the sc7280 CRD Pro boardsRajendra Nayak
Add compatibles for the Pro SKU of the sc7280 CRD boards which come with a Pro variant of the qcard. The Pro qcard variant has smps9 from pm8350c ganged up with smps7 and smps8. Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221216112918.1243-1-quic_rjendra@quicinc.com
2023-02-03Documentation: amd-pstate: introduce new global sysfs attributesPerry Yuan
The amd-pstate driver supports switching working modes at runtime. Users can view and change modes by interacting with the "status" sysfs attribute. 1) check driver mode: $ cat /sys/devices/system/cpu/amd-pstate/status 2) switch mode: `# echo "passive" | sudo tee /sys/devices/system/cpu/amd-pstate/status` or `# echo "active" | sudo tee /sys/devices/system/cpu/amd-pstate/status` Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: convert sprintf with sysfs_emit()Perry Yuan
replace the sprintf with a more generic sysfs_emit function No intended potential function impact Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03Documentation: introduce amd pstate active mode kernel command line optionsPerry Yuan
AMD Pstate driver support another firmware based autonomous mode with "amd_pstate=active" added to the kernel command line. In autonomous mode SMU firmware decides frequencies at runtime based on workload utilization, usage in other IPs, infrastructure limits such as power, thermals and so on. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03Documentation: amd-pstate: add amd pstate driver mode introductionPerry Yuan
The amd-pstate driver has two operation modes supported: * CPPC Autonomous (active) mode * CPPC non-autonomous (passive) mode. active mode and passive mode can be chosen by different kernel parameters. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: add driver working mode switch supportPerry Yuan
While amd-pstate driver was loaded with specific driver mode, it will need to check which mode is enabled for the pstate driver,add this sysfs entry to show the current status $ cat /sys/devices/system/cpu/amd-pstate/status active Meanwhile, user can switch the pstate driver mode with writing mode string to sysfs entry as below. Enable passive mode: $ sudo bash -c "echo passive > /sys/devices/system/cpu/amd-pstate/status" Enable active mode (EPP driver mode): $ sudo bash -c "echo active > /sys/devices/system/cpu/amd-pstate/status" Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: implement suspend and resume callbacksPerry Yuan
add suspend and resume support for the AMD processors by amd_pstate_epp driver instance. When the CPPC is suspended, EPP driver will set EPP profile to 'power' profile and set max/min perf to lowest perf value. When resume happens, it will restore the MSR registers with previous cached value. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: implement amd pstate cpu online and offline callbackPerry Yuan
Adds online and offline driver callback support to allow cpu cores go offline and help to restore the previous working states when core goes back online later for EPP driver mode. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: implement Pstate EPP support for the AMD processorsPerry Yuan
Add EPP driver support for AMD SoCs which support a dedicated MSR for CPPC. EPP is used by the DPM controller to configure the frequency that a core operates at during short periods of activity. The SoC EPP targets are configured on a scale from 0 to 255 where 0 represents maximum performance and 255 represents maximum efficiency. The amd-pstate driver exports profile string names to userspace that are tied to specific EPP values. The balance_performance string (0x80) provides the best balance for efficiency versus power on most systems, but users can choose other strings to meet their needs as well. $ cat /sys/devices/system/cpu/cpufreq/policy0/energy_performance_available_preferences default performance balance_performance balance_power power $ cat /sys/devices/system/cpu/cpufreq/policy0/energy_performance_preference balance_performance To enable the driver,it needs to add `amd_pstate=active` to kernel command line and kernel will load the active mode epp driver Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: optimize driver working mode selection in ↵Wyes Karny
amd_pstate_param() The amd-pstate driver may support multiple working modes. Introduce a variable to keep track of which mode is currently enabled. Here we use cppc_state var to indicate which mode is enabled. This change will help to simplify the the amd_pstate_param() to choose which mode used for the following driver registration. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03Documentation: amd-pstate: add EPP profiles introductionPerry Yuan
The amd-pstate driver supports a feature called energy performance preference (EPP). Add information to the documentation to explain how users can interact with the sysfs files for this feature. 1) See all EPP profiles $ sudo cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_available_preferences default performance balance_performance balance_power power 2) Check current EPP profile $ sudo cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference performance 3) Set new EPP profile $ sudo bash -c "echo power > /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference" Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03ACPI: CPPC: Add AMD pstate energy performance preference cppc controlPerry Yuan
Add support for setting and querying EPP preferences to the generic CPPC driver. This enables downstream drivers such as amd-pstate to discover and use these values. Downstream drivers that want to use the new symbols cppc_get_epp_caps and cppc_set_epp_perf for querying and setting EPP preferences will need to call cppc_set_epp_perf to enable the EPP function firstly. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03arm64: dts: qcom: sm8450-nagara: Correct firmware pathsKonrad Dybcio
Nagara is definitely not SM8350, fix it! Fixes: c53532f7825c ("arm64: dts: qcom: pdx223: correct firmware paths") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230203142309.1106349-1-konrad.dybcio@linaro.org
2023-02-03Merge tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "A bit bigger than I'd like at this point, but mostly a bunch of little fixes. In detail: - NVMe pull request via Christoph: - Fix a missing queue put in nvmet_fc_ls_create_association (Amit Engel) - Clear queue pointers on tag_set initialization failure (Maurizio Lombardi) - Use workqueue dedicated to authentication (Shin'ichiro Kawasaki) - Fix for an overflow in ublk (Liu) - Fix for leaking a queue reference in block cgroups (Ming) - Fix for a use-after-free in BFQ (Yu)" * tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux: blk-cgroup: don't update io stat for root cgroup nvme-auth: use workqueue dedicated to authentication nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association block: Fix the blk_mq_destroy_queue() documentation block: ublk: extending queue_size to fix overflow block, bfq: fix uaf for bfqq in bic_set_bfqq()
2023-02-03drm/amdgpu: fix memory leak in amdgpu_cs_sync_ringsBert Karwatzki
amdgpu_sync_get_fence deletes the returned fence from the syncobj, so the refcount of fence needs to lowered to avoid a memory leak. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2360 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bert Karwatzki <spasswolf@web.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/3b590ba0f11d24b8c6c39c3d38250129c1116af4.camel@web.de
2023-02-03Merge tag 'ceph-for-6.2-rc7' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fix from Ilya Dryomov: "A safeguard to prevent the kernel client from further damaging the filesystem after running into a case of an invalid snap trace. The root cause of this metadata corruption is still being investigated but it appears to be stemming from the MDS. As such, this is the best we can do for now" * tag 'ceph-for-6.2-rc7' of https://github.com/ceph/ceph-client: ceph: blocklist the kclient when receiving corrupted snap trace ceph: move mount state enum to super.h
2023-02-03Merge tag 'efi-fixes-for-v6.2-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - handle potential mremap() failure gracefully - don't reject EFI memory attributes table version 2 * tag 'efi-fixes-for-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: fix potential NULL deref in efi_mem_reserve_persistent efi: Accept version 2 of memory attributes table
2023-02-03Merge tag 'riscv-for-linus-6.2-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A build fix to avoid static branches in cpu_relax(), which greatly inflates the jump tables and breaks at least CONFIG_CC_OPTIMIZE_FOR_SIZE=y. - A fix for a kernel panic when probing impossible instruction positions. - A fix to disable unwind tables, which are enabled by default for GCC-13 and result in unhandled relocations in modules. * tag 'riscv-for-linus-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: disable generation of unwind tables riscv: kprobe: Fixup kernel panic when probing an illegal position riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
2023-02-03Merge tag 'drm-fixes-2023-02-03' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "A few more fixes this week, a bit more spread out though. We have a bunch of nouveau regression and stabilisation fixes, along with usual amdgpu, and i915. Otherwise just some minor misc ones: dma-fence: - fix signaling bit for private fences panel: - boe-tv101wum-nl6 disable fix nouveau: - gm20b acr regression fix - tu102 scrub status fix - tu102 wait for firmware fix i915: - Fixes for potential use-after-free and double-free - GuC locking and refcount fixes - Display's reference clock value fix amdgpu: - GC11 fixes - DCN 3.1.4 fixes - NBIO 4.3 fix - DCN 3.2 fixes - Properly handle additional cases where DCN is not supported - SMU13 fixes vc4: - fix CEC adapter names ssd130x: - fix display init regression" * tag 'drm-fixes-2023-02-03' of git://anongit.freedesktop.org/drm/drm: (23 commits) drm/amd/display: Properly handle additional cases where DCN is not supported drm/amdgpu: Enable vclk dclk node for gc11.0.3 drm/amd: Fix initialization for nbio 4.3.0 drm/amdgpu: enable HDP SD for gfx 11.0.3 drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11 drm/amd/display: Reset DMUB mailbox SW state after HW reset drm/amd/display: Unassign does_plane_fit_in_mall function from dcn3.2 drm/amd/display: Adjust downscaling limits for dcn314 drm/amd/display: Add missing brackets in calculation drm/amdgpu: update wave data type to 3 for gfx11 drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed during disable drm/nouveau/acr/gm20b: regression fixes drm/nouveau/fb/tu102-: fix register used to determine scrub status drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETED drm/i915/adlp: Fix typo for reference clock drm/i915: Fix potential bit_17 double-free drm/i915: Fix up locking around dumping requests lists drm/i915: Fix request ref counting during error capture & debugfs dump drm/i915/guc: Fix locking when searching for a hung request drm/i915: Avoid potential vm use-after-free ...
2023-02-03Merge tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "25 hotfixes, mainly for MM. 13 are cc:stable" * tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits) mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath() Kconfig.debug: fix the help description in SCHED_DEBUG mm/swapfile: add cond_resched() in get_swap_pages() mm: use stack_depot_early_init for kmemleak Squashfs: fix handling and sanity checking of xattr_ids count sh: define RUNTIME_DISCARD_EXIT highmem: round down the address passed to kunmap_flush_on_unmap() migrate: hugetlb: check for hugetlb shared PMD in node migration mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups Revert "mm: kmemleak: alloc gray object for reserved region with direct map" freevxfs: Kconfig: fix spelling maple_tree: should get pivots boundary by type .mailmap: update e-mail address for Eugen Hristev mm, mremap: fix mremap() expanding for vma's with vm_ops->close() squashfs: harden sanity check in squashfs_read_xattr_id_table ia64: fix build error due to switch case label appearing next to declaration mm: multi-gen LRU: fix crash during cgroup migration Revert "mm: add nodes= arg to memory.reclaim" zsmalloc: fix a race with deferred_handles storing ...
2023-02-03libceph: use bvec_set_page to initialize bvecsChristoph Hellwig
Use the bvec_set_page helper to initialize bvecs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Link: https://lore.kernel.org/r/20230203150634.3199647-24-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03vringh: use bvec_set_page to initialize a bvecChristoph Hellwig
Use the bvec_set_page helper to initialize a bvec. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20230203150634.3199647-23-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03sunrpc: use bvec_set_page to initialize bvecsChristoph Hellwig
Use the bvec_set_page helper to initialize bvecs. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com> Link: https://lore.kernel.org/r/20230203150634.3199647-22-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03rxrpc: use bvec_set_page to initialize a bvecChristoph Hellwig
Use the bvec_set_page helper to initialize a bvec. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20230203150634.3199647-21-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-16 22:35:00 +0000