summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-11-01mfd: lpc_ich: Move APL GPIO resources to a custom structureAndy Shevchenko
We are expecting more platforms that want to instantiate the GPIO device via P2SB. For them prepare the custom structure and move Apollo Lake data there. Refactor the code accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230926190834.932233-3-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: lpc_ich: Convert gpio_version to be enumAndy Shevchenko
We have an anonymous enum for the GPIO versions. Make it named and use this type for the gpio_version member of struct lpc_ich_info. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230926190834.932233-2-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: lpc_ich: Make struct lpc_ich_priv use enum for chipset memberAndy Shevchenko
We have a specific enum for the supported chipsets. Make struct lpc_ich_priv use better type for the chipset member. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230926190834.932233-1-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: Add missing unevaluatedProperties on child node schemasRob Herring
Just as unevaluatedProperties or additionalProperties are required at the top level of schemas, they should (and will) also be required for child node schemas. That ensures only documented properties are present for any node. Add unevaluatedProperties as needed, and then add any missing properties flagged by the addition. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230925212729.1976117-1-robh@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: x-powers,axp152: Make interrupt optional for more chipsAndre Przywara
All X-Powers PMICs described by this binding have an IRQ pin, and so far (almost) all boards connected this to some NMI pin or GPIO on the SoC they are connected to. However we start to see boards that omit this connection, and technically the IRQ pin is not essential to the basic PMIC operation. The existing Linux driver allows skipping the IRQ pin setup for two chips already, so update the binding to also make the DT property optional for the missing chip. And while we are at it, add the AXP313a to that list, as they are actually boards out there not connecting the IRQ pin. This allows to have DTs correctly describing those boards not wiring up the interrupt. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230919103913.463156-2-andre.przywara@arm.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: dln2: Fix double put in dln2_probeDinghao Liu
The dln2_free() already contains usb_put_dev(). Therefore, the redundant usb_put_dev() before dln2_free() may lead to a double free. Fixes: 96da8f148396 ("mfd: dln2: Fix memory leak in dln2_probe()") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20230925024134.9683-1-dinghao.liu@zju.edu.cn Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: max8998: Simplify obtaining I2C match data and drop ↵Biju Das
max8998_i2c_get_driver_data() Simplify probe() by using i2c_get_match_data() instead of max8998_i2c_get_driver_data() for retrieving match data from OF/ID tables. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230923174928.56824-5-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: max77541: Simplify obtaining I2C match dataBiju Das
Simplify probe() by replacing device_get_match_data() and ID lookup for retrieving match data by i2c_get_match_data(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230923174928.56824-4-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: madera-i2c: Simplify obtaining I2C match dataBiju Das
Simplify probe() by replacing of_device_get_match_data() and ID lookup for retrieving match data by i2c_get_match_data(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230923174928.56824-3-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: arizona-i2c: Simplify obtaining I2C match dataBiju Das
Simplify probe() by replacing device_get_match_data() and ID lookup for retrieving match data by i2c_get_match_data(). After this drop intializing the variable type. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230923174928.56824-2-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: iqs62x: Annotate struct iqs62x_fw_blk with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct iqs62x_fw_blk. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230922175337.work.150-kees@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: stm32-timers: Add support for interruptsFabrice Gasnier
There are two types of STM32 timers that may have: - a global interrupt line - 4 dedicated interrupt lines. Those interrupts are optional as defined in the dt-bindings. Enforce checks on either one, four or no interrupts are provided with their names. Optionally get them here, to be used by child devices. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20230829134029.2402868-5-fabrice.gasnier@foss.st.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: twl-core: Add a clock subdevice for the TWL6032Andreas Kemnade
Clock device needs no separate devicetree node, so add it as a platform device. Other devices in the family also have controllable clocks, but due to the lack of testing, just add it for the TWL6032 now. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20230916100515.1650336-4-andreas@kemnade.info Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: ti,twl: Add clock provider propertiesAndreas Kemnade
Since these devices provide clock outputs, add the corresponding property. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230916100515.1650336-3-andreas@kemnade.info Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: Convert twl-family.txt to json-schemaAndreas Kemnade
Convert the TWL[46]030 binding to DT schema format. To do it as a step by step work, do not include / handle nodes for subdevices yet, just convert things with minimal corrections. There are already some bindings for its subdevices in the tree. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230916100515.1650336-2-andreas@kemnade.info Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: atmel-hlcdc: Add compatible for sam9x75 XLCD controllerManikandan Muralidharan
Add compatible for sam9x75 XLCD controller. Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Link: https://lore.kernel.org/r/20230915104849.187146-2-manikandan.m@microchip.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: syscon: Add ti,am654-dss-oldi-io-ctrl compatibleAndrew Davis
Add TI DSS OLDI-IO control registers compatible. This is a region of 5 32bit registers found in the TI AM65 CTRL_MMR0 register space[0]. They are used to control the characteristics of the OLDI DATA/CLK IO as needed by the DSS display controller node. [0] https://www.ti.com/lit/pdf/spruid7 Signed-off-by: Andrew Davis <afd@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> Link: https://lore.kernel.org/r/20230911142556.64108-1-afd@ti.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: ab8500: Remove non-existent configuration "#ifdef CONFIG_AB8500_DEBUG"Ying Sun
The CONFIG_AB8500_DEBUG has been deleted in: 3d4d1266597c0 ("mfd: ab8500: Drop debugfs module") The condition "#ifdef CONFIG_AB8500_DEBUG" in: include/linux/mfd/abx500/ab8500.h:502 ...cannot be valid. It is recommended to delete redundant code. Suggested-by: Yanjie Ren <renyanjie01@gmail.com> Signed-off-by: Ying Sun <sunying@nj.iscas.ac.cn> Link: https://lore.kernel.org/r/20230913084559.18141-1-sunying@nj.iscas.ac.cn Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: wcd934x: Update to use maple tree register cacheMark Brown
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. In v6.5 it has also acquired the ability to generate multi-register writes in sync operations, bringing performance up to parity with the rbtree cache there. Update the wcd934x to use the more modern data structure. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230912-mfd-wcd934x-maple-v2-1-292a154113e3@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: maxim,max8998: Convert to DT schemaKrzysztof Kozlowski
Convert the bindings for Maxim MAX8998, National/TI LP3974 Power Management IC to DT schema. Adjust example to real DTS and make second interrupt optional (like on s5pv210-aries.dtsi). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230911120135.37528-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: qcom,tcsr: Add compatible for sm4450Tengfei Fan
Document the qcom,sm4450-tcsr compatible. Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230908065847.28382-3-quic_tengfan@quicinc.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: axp20x: Generalise handling without interruptAndre Przywara
At the moment we allow the AXP15060 and the AXP806 PMICs to omit the interrupt line to the SoC, and we skip registering the PEK (power key) driver in this case, since that crashes when no IRQ is described in the DT node. The IRQ pin potentially not being connected to anything does affect more PMICs, though, and the PEK driver is not the only one requiring an interrupt: at least the AC power supply driver crashes in a similar fashion. Generalise the handling of AXP MFD devices when the platform tables describe no interrupt, by allowing each device to specify an alternative MFD list for this case. If no specific alternative is specified, we go with the safe default of "just the regulators", which matches the current situation. This enables new devices using the AXP313a PMIC, but not connecting the IRQ pin. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230828213229.20332-1-andre.przywara@arm.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: palmas: Make similar OF and ID tableBiju Das
Make similar OF and ID table to extend support for ID match using i2c_match_data(). Currently it works only for OF match tables as the driver_data is wrong for ID match. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230831183153.63750-5-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: palmas: Move OF table closer to its consumerBiju Das
Move OF table near to the user. While at it, arrange compatible and data in single line. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230831183153.63750-4-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: palmas: Constify .data in OF table and {palmas,tps65917}_irq_chipBiju Das
Constify .data in OF table and {palmas,tps65917}_irq_chip and replace the variable *features->features in struct palmas_driver_data and drop the {palmas,tps659038}_features variables and use their values directly in the named initialization. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230831183153.63750-3-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: palmas: Remove trailing comma in the terminator entryBiju Das
Remove trailing comma in the terminator entry for OF table. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230831183153.63750-2-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: stericsson,db8500-prcmu: Spelling s/Cortex A-/Cortex-A/Geert Uytterhoeven
Fix a misspelling of "Cortex-A9". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/0789000f012122a7fa27ef709c738101b00cd834.1693407196.git.geert+renesas@glider.be Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: syscon: Add rockchip,rk3128-qos compatibleAlex Bee
Document Rockchip RK3128 SoC compatible for qos registers. Signed-off-by: Alex Bee <knaerzche@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230829171647.187787-2-knaerzche@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: core: Ensure disabled devices are skipped without abortingHerve Codina
The loop searching for a matching device based on its compatible string is aborted when a matching disabled device is found. This abort prevents to add devices as soon as one disabled device is found. Continue searching for an other device instead of aborting on the first disabled one fixes the issue. Fixes: 22380b65dc70 ("mfd: mfd-core: Ensure disabled devices are ignored without error") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/528425d6472176bb1d02d79596b51f8c28a551cc.1692376361.git.christophe.leroy@csgroup.eu Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: qcom,spmi-pmic: Add typec to SPMI device typesBryan O'Donoghue
Add the PMIC Type-C port driver to the list of devices. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230816115151.501736-2-bryan.odonoghue@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: max8997: Simplify obtaining I2C match data and drop ↵Biju Das
max8997_i2c_get_driver_data() Simplify probe() by using i2c_get_match_data() instead of max8997_i2c_get_driver_data() for retrieving match data from OF/ID tables. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230828160224.92037-1-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: core: Un-constify mfd_cell.of_regMichał Mirosław
Enable dynamically filling in the whole mfd_cell structure. All other fields already allow that. Fixes: 466a62d7642f ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/b73fe4bc4bd6ba1af90940a640ed65fe254c0408.1693253717.git.mirq-linux@rere.qmqm.pl Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: qcom-pm8xxx: Add missing child nodesDmitry Baryshkov
Add gpio, keypad, led, mpps, pwrkey, vibrator and xoadc as possible child nodes of qcom,pm8xxx, referencing existint schema files. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230827132525.951475-3-dmitry.baryshkov@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: qcom-spmi-pmic: Add pm8450 entryDmitry Baryshkov
Add bindings for the PM8450 PMIC (qcom,pm8450). No driver changes are necessary, since the PMIC is handled by the generic qcom,spmi-pmic entry. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230821232532.3110607-1-dmitry.baryshkov@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01Merge tag 'ib-mfd-i2c-reboot-v6.7' into ibs-for-mfd-mergedLee Jones
Immutable branch between MFD, I2C and Reboot due for the v6.7 merge window
2023-11-01crypto: adiantum - flush destination page before unmappingEric Biggers
Upon additional review, the new fast path in adiantum_finish() is missing the call to flush_dcache_page() that scatterwalk_map_and_copy() was doing. It's apparently debatable whether flush_dcache_page() is actually needed, as per the discussion at https://lore.kernel.org/lkml/YYP1lAq46NWzhOf0@casper.infradead.org/T/#u. However, it appears that currently all the helper functions that write to a page, such as scatterwalk_map_and_copy(), memcpy_to_page(), and memzero_page(), do the dcache flush. So do it to be consistent. Fixes: dadf5e56c967 ("crypto: adiantum - add fast path for single-page messages") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-11-01crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct placeEric Biggers
alg_test_descs[] needs to be in sorted order, since it is used for binary search. This fixes the following boot-time warning: testmgr: alg_test_descs entries in wrong order: 'pkcs1pad(rsa,sha512)' before 'pkcs1pad(rsa,sha3-256)' Fixes: ee62afb9d02d ("crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support") Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-31Merge tag 'devicetree-for-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add a kselftest to check for unprobed DT devices - Fix address translation for some 3 address cells cases - Refactor firmware node refcounting for AMBA bus - Add bindings for qcom,sm4450-pdc, Qualcomm Kryo 465 CPU, and Freescale QMC HDLC - Add Marantec vendor prefix - Convert qcom,pm8921-keypad, cnxt,cx92755-wdt, da9062-wdt, and atmel,at91rm9200-wdt bindings to DT schema - Several additionalProperties/unevaluatedProperties on child node schemas fixes - Drop reserved-memory bindings which now live in dtschema project - Fix a reference to rockchip,inno-usb2phy.yaml - Remove backlight nodes from display panel examples - Expand example for using DT_SCHEMA_FILES - Merge simple LVDS panel bindings to one binding doc * tag 'devicetree-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits) dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add support for QMC HDLC dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add 'additionalProperties: false' in child nodes dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Fix example property name dt-bindings: arm,coresight-cti: Add missing additionalProperties on child nodes dt-bindings: arm,coresight-cti: Drop type for 'cpu' property dt-bindings: soundwire: Add reference to soundwire-controller.yaml schema dt-bindings: input: syna,rmi4: Make "additionalProperties: true" explicit media: dt-bindings: ti,ds90ub960: Add missing type for "i2c-alias" dt-bindings: input: qcom,pm8921-keypad: convert to YAML format of: overlay: unittest: overlay_bad_unresolved: Spelling s/ok/okay/ of: address: Consolidate bus .map() functions of: address: Store number of bus flag cells rather than bool of: unittest: Add tests for address translations of: address: Remove duplicated functions of: address: Fix address translation when address-size is greater than 2 dt-bindings: watchdog: cnxt,cx92755-wdt: convert txt to yaml dt-bindings: watchdog: da9062-wdt: convert txt to yaml dt-bindings: watchdog: fsl,scu-wdt: Document imx8dl dt-bindings: watchdog: atmel,at91rm9200-wdt: convert txt to yaml dt-bindings: usb: rockchip,dwc3: update inno usb2 phy binding name ...
2023-10-31Merge tag 'for-v6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Core changes: - propagate of_node to child device - change from atomic to blocking notifier_call_chain New drivers: - pm8916 battery management system - mm8013 fuel gauge New features: - maxim max17040: add temperature support - gpio-poweroff: make priority configurable Cleanups: - simplify reset drivers using builtin_platform_driver() - convert all platform drivers to remove_new callback - replace all strncpy occurrences with strscpy - started converting drivers to i2c_get_match_data() - misc fixes and cleanups" * tag 'for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (91 commits) power: reset: vexpress: Use device_get_match_data() power: supply: surface-charger: replace deprecated strncpy with strscpy power: supply: surface_battery: replace deprecated strncpy with strscpy power: supply: charger-manager: replace deprecated strncpy with strscpy power: supply: bq25980: replace deprecated strncpy with strscpy power: supply: bq256xx: replace deprecated strncpy with strscpy power: supply: bq2515x: replace deprecated strncpy with strscpy power: supply: bq24190_charger: replace deprecated strncpy with strscpy power: supply: cpcap: Drop non-DT driver matching power: reset: brcmstb: Depend on actual SoC dependencies power: reset: gpio-poweroff: make sys handler priority configurable dt-bindings: power: reset: gpio-poweroff: Add priority property power: reset: gpio-poweroff: use sys-off handler API power: reset: gpio-poweroff: use a struct to store the module variables power: supply: rt5033_charger: Replace "&pdev->dev" by "charger->dev" in probe power: supply: rt5033_charger: Simplify initialization of rt5033_charger_data power: supply: rt5033_charger: Add cable detection and USB OTG supply power: supply: core: remove opencoded string_lower() dt-bindings: power: supply: sbs-manager: Add missing unevaluatedProperties on child node schemas power: supply: mm8013: Fix an error checking issue in mm8013_checkdevice() ...
2023-10-31Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver updates from Stephen Boyd: "Herein lies a smallish collection of clk driver updates and some core clk framework changes for the merge window. The core framework changes are only improving the debugfs interface to allow phase adjustments and report which consumers of a clk there are. These are most likely only of interest to kernel developers. On the clk driver side, it's a ghastly amount of updates with only a handful of new clk drivers. We have a couple new clk drivers for Qualcomm, per usual, and a driver for Renesas, Amlogic, and TI respectively. The updates are spread throughout the clk drivers. Some highlights are fixing kunit tests for different configurations like lockdep and big-endian, avoiding integer overflow in rate settable clks, moving clk_hw_onecell_data to the end of allocations so that drivers don't corrupt their private data, and migrating clk drivers to the regmap maple tree. Otherwise it's the usual fixes to clk drivers that only come along with testing the drivers on real hardware. New Drivers: - Add clock driver for TWL6032 - Initial support for the Qualcomm SM4450 Global Clock Controller and SM4450 RPMh clock controllers - Add Camera Clock Controller on Qualcomm SM8550 - Add support for the Renesas RZ/G3S (R9A08G045) SoC - Add Amlogic s4 main clock controller support Updates: - Make clk kunit tests work with lockdep - Fix clk gate kunit test for big-endian - Convert more than a handful of clk drivers to use regmap maple tree - Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk implementation - Add consumer info to clk debugfs - Fix various clk drivers that have clk_hw_onecell_data not at the end of an allocation - Drop CLK_SET_RATE_PARENT for clocks with fixed-rate GPLLs across a variety of Qualcomm IPQ platforms - Add missing parent of APCS PLL on Qualcomm IPQ6018 - Add I2C QUP6 clk on Qualcomm IPQ6018 but mark it critical to avoid problems with RPM - Implement safe source switching for a53pll and use on Qualcomm IPQ5332 - Add support for Stromer Plus PLLs to Qualcomm clk driver - Switch Qualcomm SM8550 Video and GPU clock controllers to use OLE PLL configure method - Non critical fixes to halt bit checks in Qualcomm clk drivers - Add SMMU GDSC for Qualcomm MSM8998 - Fix possible integer overflow in Qualcomm RCG frequency calculation code - Remove RPM managed clks from Qualcomm MSM8996 GCC driver - Add HFPLL configuration for the three HFPLLs in Qualcomm MSM8976 - Switch Qualcomm MSM8996 CBF clock driver's remove function to return void - Fix missing dependency for s4 clock controllers - Select MXC_CLK when building in the CLK_IMX8QXP - Fixes for error handling paths in i.MX8 ACM driver - Move the clocks check in i.MX8 ACM driver in order to log any error - Drop the unused return value of clk_imx_acm_detach_pm_domains - Drop non-existant IMX8MP_CLK_AUDIOMIX_PDM_ROOT clock - Fix error handling in i.MX8MQ clock driver - Allow a different LCDIF1 clock parent if DT describes it for i.MX6SX - Keep the SCU resource table sorted in the i.MX8DXL rsrc driver - Move the elcdif PLL clock registration above lcd_clk, as it is its parent - Correct some ENET specific clocks for i.MX8DXL platform - Drop the VPU_UART and VPUCORE from i.MX8QM as latest HW revision doesn't have them - Remove "de-featured" MLB support from i.MX8QM/QXP/DXL platforms - Skip registering clocks owned by Cortex-A partition SCU-based platforms - Add CAN_1/2 to i.MX8QM and M4_0, PI_0_PWM_0 and PI_0_I2C_0 to i.MX8QXP resources" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits) clk: Fix clk gate kunit test on big-endian CPUs clk: si521xx: Increase stack based print buffer size in probe clk: mediatek: fix double free in mtk_clk_register_pllfh() clk: socfpga: agilex: Add bounds-checking coverage for struct stratix10_clock_data clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data clk: sifive: Allow building the driver as a module clk: analogbits: Allow building the library as a module clk: sprd: Composite driver support offset config clk: Allow phase adjustment from debugfs clk: Show active consumers of clocks in debugfs clk: Use device_get_match_data() clk: visconti: Add bounds-checking coverage for struct visconti_pll_provider clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider clk: cdce925: Extend match support for OF tables clk: si570: Simplify probe clk: si5351: Simplify probe clk: rs9: Use i2c_get_match_data() instead of device_get_match_data() clk: clk-si544: Simplify probe() and is_valid_frequency() clk: si521xx: Use i2c_get_match_data() instead of device_get_match_data() clk: meson: S4: select CONFIG_COMMON_CLK_MESON_CLKC_UTILS ...
2023-10-31Merge tag 'for-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux Pull hte/timestamp updates from Dipen Patel: - Improve comments in the translate function - Reflect the GPIOLIB API changes during calculation of the GPIO base - Improve error handling in Tegra test and provider drivers - Improve code to set the line name * tag 'for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux: hte: Use kasprintf() instead of fixed buffer formatting hte: tegra: Fix missing error code in tegra_hte_test_probe() hte: tegra194: Switch to LATE_SIMPLE_DEV_PM_OPS() hte: tegra194: Remove redundant dev_err() hte: tegra194: improve the GPIO-related comment hte: allow building modules with COMPILE_TEST enabled hte: Annotate struct hte_device with __counted_by
2023-10-31Merge tag 'platform-drivers-x86-v6.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - asus-wmi: Support for screenpad and solve brightness key press duplication - int3472: Eliminate the last use of deprecated GPIO functions - mlxbf-pmc: New HW support - msi-ec: Support new EC configurations - thinkpad_acpi: Support reading aux MAC address during passthrough - wmi: Fixes & improvements - x86-android-tablets: Detection fix and avoid use of GPIO private APIs - Debug & metrics interface improvements - Miscellaneous cleanups / fixes / improvements * tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits) platform/x86: inspur-platform-profile: Add platform profile support platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e platform/x86: wmi: Decouple WMI device removal from wmi_block_list platform/x86: wmi: Fix opening of char device platform/x86: wmi: Fix probe failure when failing to register WMI devices platform/x86: wmi: Fix refcounting of WMI devices in legacy functions platform/x86: wmi: Decouple probe deferring from wmi_block_list platform/x86/amd/hsmp: Fix iomem handling platform/x86: asus-wmi: Do not report brightness up/down keys when also reported by acpi_video platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy tools/power/x86/intel-speed-select: v1.18 release tools/power/x86/intel-speed-select: Use cgroup isolate for CPU 0 tools/power/x86/intel-speed-select: Increase max CPUs in one request tools/power/x86/intel-speed-select: Display error for core-power support tools/power/x86/intel-speed-select: No TRL for non compute domains tools/power/x86/intel-speed-select: turbo-mode enable disable swapped tools/power/x86/intel-speed-select: Update help for TRL tools/power/x86/intel-speed-select: Sanitize integer arguments platform/x86: acer-wmi: Remove void function return platform/x86/amd/pmc: Add dump_custom_stb module parameter ...
2023-10-31Merge tag 'tag-chrome-platform-for-v6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Tzung-Bi Shih: "Improvements: - Annotate flexible array members with __counted_by - Convert platform drivers' .remove callbacks to return void Fixes: - Avoid MKBP event timeouts by disabling/enabling IRQ later/earlier Misc: - Minor cleanups and fixes" * tag 'tag-chrome-platform-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (21 commits) platform/chrome: cros_ec_lpc: Separate host command and irq disable platform/chrome: kunit: make EC protocol tests independent platform/chrome: kunit: initialize lock for fake ec_dev platform/chrome: cros_ec: fix compilation warning platform/chrome: cros_ec_proto: Mark outdata as const platform/chrome: cros_typec_vdm: Mark port_amode_ops const platform/chrome: cros_ec_typec: Use dev_err_probe() more platform/chrome: cros_ec_typec: Use semi-colons instead of commas platform/chrome/wilco_ec: telemetry: Convert to platform remove callback returning void platform/chrome/wilco_ec: debugfs: Convert to platform remove callback returning void platform/chrome/wilco_ec: core: Convert to platform remove callback returning void platform/chrome: cros_usbpd_notify: Convert to platform remove callback returning void platform/chrome: cros_usbpd_logger: Convert to platform remove callback returning void platform/chrome: cros_typec_switch: Convert to platform remove callback returning void platform/chrome: cros_ec_vbc: Convert to platform remove callback returning void platform/chrome: cros_ec_sysfs: Convert to platform remove callback returning void platform/chrome: cros_ec_lpc: Convert to platform remove callback returning void platform/chrome: cros_ec_lightbar: Convert to platform remove callback returning void platform/chrome: cros_ec_debugfs: Convert to platform remove callback returning void platform/chrome: cros_ec_chardev: Convert to platform remove callback returning void ...
2023-10-31Merge tag 'hwmon-for-v6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers: - Driver for LTC2991 - Driver for POWER-Z Added chip / system support to existing drivers: - The ina238 driver now also supports INA237 - The asus-ec-sensors driver now supports ROG Crosshair X670E Gene - The aquacomputer_d5next now supports Aquacomputer High Flow USB and MPS Flow - The pmbus/mpq7932 driver now also supports MPQ2286 - The nct6683 now also supports ASRock X670E Taichi Various other minor improvements and fixes: - One patch series to call out is the conversion of hwmon platform drivers to use the platform remove callback returning void" * tag 'hwmon-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (69 commits) hwmon: (aquacomputer_d5next) Check if temp sensors of legacy devices are connected hwmon: (aquacomputer_d5next) Add support for Aquacomputer High Flow USB and MPS Flow dt-bindings: hwmon: npcm: Add npcm845 compatible string hwmon: Add driver for ltc2991 dt-bindings: hwmon: ltc2991: add bindings hwmon: (pmbus/max31785) Add delay between bus accesses hwmon: (ina238) add ina237 support dt-bindings: hwmon: ti,ina2xx: add ti,ina237 hwmon: (asus-ec-sensors) add ROG Crosshair X670E Gene. hwmon: (max31827) handle vref regulator hwmon: (ina3221) Add support for channel summation disable dt-bindings: hwmon: ina3221: Add ti,summation-disable dt-bindings: hwmon: ina3221: Convert to json-schema hwmon: (pmbus/mpq7932) Add a support for mpq2286 Power Management IC hwmon: (pmbus/core) Add helper macro to define single pmbus regulator regulator: dt-bindings: Add mps,mpq2286 power-management IC hwmon: (pmbus/mpq7932) Get page count based on chip info dt-bindings: hwmon: Add possible new properties to max31827 bindings hwmon: (max31827) Modify conversion wait time hwmon: (max31827) Make code cleaner ...
2023-10-31Merge tag 'spi-v6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This is a very quiet release for SPI, we've got cleanups and minor fixes but only a few new driver specific features. The bulk of the changes in terms of diffstat are the cleanups, plus one bit of performance work for McSPI. - Conversions to use devm_clk_get_enabled() and to remove outdated terms for controller and device - Device mode support for the Renesas CSI - Cleanups and improvements to the device tree bindings aimed at making validation better - PIO FIFO usage for the OMAP2 McSPI, improving performance" * tag 'spi-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (75 commits) spi: omap2-mcspi: Add FIFO support without DMA spi: stm32: Explicitly include correct DT includes spi: Export acpi_spi_find_controller_by_adev() spi: nxp-fspi: use the correct ioremap function spi: Don't use flexible array in struct spi_message definition spi: bcm2835: add a sentinel at the end of the lookup array spi: spi-geni-qcom: Rename the label unmap_if_dma spi: rzv2m-csi: Add target mode support spi: renesas,rzv2m-csi: Add CSI (SPI) target related property spi: spidev: make spidev_class constant spi: mpc52xx-psc: Make mpc52xx_psc_spi_transfer_one_message() static spi: spi-cadence-quadspi: Fix missing unwind goto warnings spi: omap2-mcspi: Fix hardcoded reference clock spi: dt-bindings: Make "additionalProperties: true" explicit spi: at91-usart: Remove some dead code spi: dt-bindings: st,stm32-spi: Move "st,spi-midi-ns" to spi-peripheral-props.yaml spi: qup: Vote for interconnect bandwidth to DRAM spi: dt-bindings: qup: Document interconnects spi: qup: Parse OPP table for DVFS support spi: dt-bindings: qup: Document power-domains and OPP ...
2023-10-31Merge tag 'regulator-v6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This has been a fairly quiet release for the regulator API, the changes are dominated by some new drivers and a quite large set of cleanups and filling in the blanks of features for the existing MT6358 driver. - Cleanups and additional features for the Mediatek MT6358 driver - Under voltage detection in the fixed regulator - Support for Maxim MAX77503, Mediatek MT6366, Qualcomm PM8909, PM8919, PMA8048 and PMC8380" * tag 'regulator-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits) regulator (max5970): Remove duplicate line regulator (max5970): Add hwmon support regulator: qcom-rpmh: Fix smps4 regulator for pm8550ve regulator: qcom,rpmh: Add PMC8380 compatible regulator: qcom-rpmh: Add regulators support for PMC8380 regulator: fixed: add support for under-voltage IRQ regulator: dt-bindings: fixed-regulator: Add under-voltage interrupt support dt-bindings: regulator: dlg,da9210: Convert to json-schema regulator: dt-bindings: Add ADI MAX77503 support regulator: max77503: Add ADI MAX77503 support regulator: Use device_get_match_data() regulator: da9121: Use i2c_get_match_data() regulator: Drop unnecessary of_match_device() calls regulator: da9063: Annotate struct da9063_regulators with __counted_by regulator: da9062: Annotate struct da9062_regulators with __counted_by regulator: mt6358: Add supply names for MT6366 regulators regulator: mt6358: Add missing regulators for MT6366 regulator: mt6358: Make MT6366 vcn18 LDO configurable regulator: mt6358: fix and drop type prefix in MT6366 regulator node names regulator: mt6358: Add supply names for MT6358 regulators ...
2023-10-31Merge tag 'regmap-v6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "The main change here is a fix for an issue where we were letting the selector for windowed register ranges get out of sync with the hardware during a cache sync plus associated KUnit tests. This was reported just at the end of the release cycle and only in -next for a day prior to the merge window so it seemed better to hold off for now, the bug had been present for more than a decade so wasn't causing too many practical problems hopefully. There's also a fix for error handling in the debugfs output from Christope Jaillet" * tag 'regmap-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Ensure range selector registers are updated after cache sync regmap: kunit: Add test for cache sync interaction with ranges regmap: kunit: Fix marking of the range window as volatile regmap: debugfs: Fix a erroneous check after snprintf()
2023-10-31Merge tag 'gpio-updates-for-v6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We don't have any new drivers. The loongson driver is getting extended with support for new models. There's a big refactor of gpio-pca953x and many small improvements to others. The GPIO code in the kernel has acquired a lot of cruft over the years as well as many abusers of the API across the kernel tree. This release cycle we have started a major cleanup and improvement effort that will most likely span several releases. We have started by converting external users of struct gpio_chip to accessing the wrapper around it - struct gpio_device. This is because the latter is reference counted while the former is removed when the provider is unbound. We also removed several instances of drivers accessing private GPIOLIB structures and including the private header from drivers/gpio/. To that end you'll see several commits aimed at different subsystems (acked by relevant maintainers) as well as two merges from the x86/platform tree. We'll then rework the locking in GPIOLIB which currently uses a big spinlock for many different things and could use becoming more fine-grained, especially as it doesn't even get the locking right. We'll also use SRCU for protecting the gpio_chip pointer against in-kernel hot-unplug crashes similar to what we saw triggered from user-space and fixed with semaphores in gpiolib-cdev. The core GPIOLIB is still vulnerable to these use-cases. I'm just mentioning the plans here, this is not part of this PR. You'll see some new instances of using __free(). We've added a gpio_device_put cleanup helper similar to the put_device one introduced by Peter Zijlstra and used it according to the preferred pattern except where it didn't make sense. GPIOLIB core: - provide interfaces allowing users to retrieve, manage and query the reference counted GPIO device instead of accessing the private gpio_chip structure - replace gpiochip_find() with gpio_device_find() - remove unused acpi_get_and_request_gpiod() - improve the ignore_interrupt functionality in GPIO ACPI - correct notifier return codes in gpiolib-of - unexport gpiod_set_transitory() as it's unused outside of core GPIO code - while there are still external users accessing struct gpio_chip, let's make gpiochip_get_desc() public so that they at least use the preferred helper - improve locking for lookup tables - annotate struct linereq with __counted_by - improve GPIOLIB docs - add an OF quirk for LED trigger sources Driver improvements: - convert all GPIO drivers with .remove() callbacks to using the new variant returning void instead of int - stop accessing the GPIOLIB private structures in gpio-mockup, i2c-mux-gpio, hte-tegra194, gpio-sim - use the recommended pattern for autofree variables in gpio-sim - add support for more models to gpio-loongson - use a notifier chain to notify other blocks about interrupts in gpio-eic-sprd instead of looking up GPIO devices on every interrupt - convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap cache - don't include GPIOLIB internal headers in drivers which don't need them - move the ingenic NAND quirk into gpiolib-of - add an ignore interrupt quirk for Peaq C1010 - drop static GPIO base from gpio-omap, gpio-f7188x - use the preferred device_get_match_data() function in drivers that still don't - refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(), use cleanup helpers, use dev_err_probe() where it makes sense, fully convert to using devres and some other minor tweaks DT bindings: - add support for a new model to gpio-vf610 and update existing properties - add support for more loongson models - add missing support for imx models that are used but undocumented - convert bindings for Intel IXP4xx to schema Minor stuff: - deprecate gpio-mockup in favor of gpio-sim - include missing headers here and there - stop using gpiochip_find() in OMAP1 board files - minor tweaks in gpio-vf610, gpio-hisi - remove unneeded 'extern' specifiers from headers" * tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (108 commits) hte: tegra194: add GPIOLIB dependency hte: tegra194: don't access struct gpio_chip gpiolib: provide gpio_device_get_base() i2c: mux: gpio: don't fiddle with GPIOLIB internals gpiolib: provide gpiod_to_gpio_device() gpiolib: provide gpio_device_to_device() gpio: hisi: Fix format specifier gpiolib: provide gpio_device_find_by_fwnode() gpio: acpi: remove acpi_get_and_request_gpiod() gpio: Use device_get_match_data() gpio: vf610: update comment for i.MX8ULP and i.MX93 legacy compatibles platform/x86: int3472: Switch to devm_get_gpiod() platform/x86: int3472: Stop using gpiod_toggle_active_low() platform/x86: int3472: Add new skl_int3472_gpiod_get_from_temp_lookup() helper platform/x86: int3472: Add new skl_int3472_fill_gpiod_lookup() helper gpio: vf610: simplify code by dropping data check gpio: vf610: add i.MX8ULP of_device_id entry dt-bindings: gpio: vf610: add i.MX95 compatible dt-bindings: gpio: vf610: correct i.MX8ULP and i.MX93 dt-bindings: gpio: vf610: update gpio-ranges ...
2023-10-31Merge tag 'pm-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add new hardware support (new Qualcomm SoC versions in cpufreq, RK3568/RK3588 in devfreq), extend the OPP (operating performance points) framework, improve cpufreq governors, fix issues and clean up code (most of the changes are in cpufreq and devfreq). Specifics: - Add support for several Qualcomm SoC versions and other similar changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan Gerhold and Varadarajan Narayanan) - Clean up the tegra cpufreq driver (Sumit Gupta) - Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob Herring) - Add support for TI's am62p5 Soc (Bryan Brattlof) - Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian Fainelli) - Update Kconfig to mention i.MX7 as well (Alexander Stein) - Revise global turbo disable check in intel_pstate (Srinivas Pandruvada) - Carry out initialization of sg_cpu in the schedutil cpufreq governor in one loop (Liao Chang) - Simplify the condition for storing 'down_threshold' in the conservative cpufreq governor (Liao Chang) - Use fine-grained mutex in the userspace cpufreq governor (Liao Chang) - Move is_managed indicator in the userspace cpufreq governor into a per-policy structure (Liao Chang) - Rebuild sched-domains when removing cpufreq driver (Pierre Gondois) - Fix buffer overflow detection in trans_stats() (Christian Marangi) - Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs to support specific devices like UFS which handle multiple clocks through OPP (Operating Performance Point) framework (Manivannan Sadhasivam) - Add perf support to the Rockchip DFI (DDR Monitor Module) devfreq- event driver: * Generalize rockchip-dfi.c to support new RK3568/RK3588 using different DDR type (Sascha Hauer). * Convert DT binding document format to yaml (Sascha Hauer). * Add perf support for DFI (a unit suitable for measuring DDR utilization) to rockchip-dfi.c to extend DFI usage (Sascha Hauer) - Add locking to the OPP handling code in the Mediatek CCI devfreq driver, because the voltage of shared OPP might be changed by multiple drivers (Mark Tseng, Dan Carpenter) - Use device_get_match_data() in the Samsung Exynos PPMU devfreq-event driver (Rob Herring) - Extend support for the opp-level beyond required-opps (Ulf Hansson) - Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru) - dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm Krait SoCs and document named opp-microvolt property (Bjorn Andersson, Dmitry Baryshkov and Christian Marangi) - Fix -Wunsequenced warning _of_add_opp_table_v1() (Nathan Chancellor) - General cleanup of OPP code (Viresh Kumar) - Use __get_safe_page() rather than touching the list in hibernation snapshot code (Brian Geffon) - Fix symbol export for _SIMPLE_ variants of _PM_OPS() (Raag Jadav) - Clean up sync_read handling in snapshot_write_next() (Brian Geffon) - Fix kerneldoc comments for swsusp_check() and swsusp_close() to better match code (Christoph Hellwig) - Downgrade BIOS locked limits pr_warn() in the Intel RAPL power capping driver to pr_debug() (Ville Syrjälä) - Change the minimum python version for the intel_pstate_tracer utility from 2.7 to 3.6 (Doug Smythies)" * tag 'pm-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (82 commits) dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT cpufreq: qcom-nvmem: add support for IPQ8064 cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu cpufreq: qcom-nvmem: drop pvs_ver for format a fuses dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu cpufreq: qcom-nvmem: add support for IPQ6018 dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018 cpufreq: qcom-nvmem: Add MSM8909 cpufreq: qcom-nvmem: Simplify driver data allocation powercap: intel_rapl: Downgrade BIOS locked limits pr_warn() to pr_debug() cpufreq: stats: Fix buffer overflow detection in trans_stats() dt-bindings: devfreq: event: rockchip,dfi: Add rk3588 support dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml PM / devfreq: rockchip-dfi: add support for RK3588 PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registers PM / devfreq: rockchip-dfi: make register stride SoC specific PM / devfreq: rockchip-dfi: Add perf support PM / devfreq: rockchip-dfi: give variable a better name ...
2023-10-31Merge tag 'acpi-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These fix issues, add new quirks, rearrange the IRQ override quirk definitions, add new helpers and switch over code to using them, rework a couple of interfaces to be more flexible, eliminate strncpy() usage from PNP, extend the ACPI PCC mailbox driver and clean up code. This is based on ACPI thermal driver changes that are present in the thermal control updates for 6.7-rc1 pull request (they are depended on by the ACPI utilities updates). However, the ACPI thermal driver changes are not included in the list of specific ACPI changes below. Specifics: - Add symbol definitions related to CDAT to the ACPICA code (Dave Jiang) - Use the acpi_device_is_present() helper in more places and rename acpi_scan_device_not_present() to be about enumeration (James Morse) - Add __printf format attribute to acpi_os_vprintf() (Su Hui) - Clean up departures from kernel coding style in the low-level interface for ACPICA (Jonathan Bergh) - Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt) - Fail FPDT parsing on zero length records and add proper handling for fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick) - Rework acpi_handle_list handling so as to manage it dynamically, including size computation (Rafael Wysocki) - Clean up ACPI utilities code so as to make it follow the kernel coding style (Jonathan Bergh) - Consolidate IRQ trigger-type override DMI tables and drop .ident values from dmi_system_id tables used for ACPI resources management quirks (Hans de Goede) - Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach) - Allow _DSD buffer data only for byte accessors and document the _DSD data buffer GUID (Andy Shevchenko) - Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS driver, because it does not need them (Raag Jadav) - Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej Zary) - Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets (Hans de Goede) - Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de Goede) - Annotate struct prm_module_info with __counted_by (Kees Cook) - Fix AER info corruption in aer_recover_queue() when error status data has multiple sections (Shiju Jose) - Make APEI use ERST maximum execution time for slow devices (Jeshua Smith) - Add support for platform notification handling to the PCC mailbox driver and modify it to support shared interrupts for multiple subspaces (Huisong Li) - Define common macros to use when referring to various bitfields in the PCC generic communications channel command and status fields and use them in some drivers (Sudeep Holla) - Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan Denose) - Fix and clean up create_pnp_modalias() and create_of_modalias() (Christophe JAILLET) - Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy Shevchenko) - Define acpi_dev_uid_match() for matching _UID and use it in several places (Raag Jadav) - Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav) - Add context argument to acpi_dev_install_notify_handler() (Rafael Wysocki) - Clarify ACPI bus concepts in the ACPI device enumeration documentation (Rafael Wysocki) - Switch over the ACPI AC and ACPI PAD drivers to using the platform driver interface which, is more logically consistent than binding a driver directly to an ACPI device object, and clean them up (Michal Wilczynski) - Replace strncpy() in the PNP code with either memcpy() or strscpy() as appropriate (Justin Stitt) - Clean up coding style in pnp.h (GuoHua Cheng)" * tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits) ACPI: resource: Do IRQ override on TongFang GMxXGxx perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID ACPI: EC: Add quirk for HP 250 G7 Notebook PC ACPI: x86: use acpi_dev_uid_match() for matching _UID ACPI: utils: use acpi_dev_uid_match() for matching _UID pinctrl: intel: use acpi_dev_uid_match() for matching _UID ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias() ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias() ACPI: acpi_pad: Rename ACPI device from device to adev ACPI: acpi_pad: Use dev groups for sysfs ACPI: acpi_pad: Replace acpi_driver with platform_driver ACPI: APEI: Use ERST timeout for slow devices ACPI: scan: Rename acpi_scan_device_not_present() to be about enumeration PNP: replace deprecated strncpy() with memcpy() PNP: ACPI: replace deprecated strncpy() with strscpy() perf: qcom: use acpi_device_uid() for fetching _UID ACPI: sysfs: use acpi_device_uid() for fetching _UID ACPI: scan: Use the acpi_device_is_present() helper in more places ACPI: AC: Rename ACPI device from device to adev ...
generated by cgit (git 2.34.1) at 2025-09-11 07:16:53 +0000