| Age | Commit message (Collapse) | Author |
|---|
|
This adds the stub side for the new seccomp process management code. In
this case we do register save/restore through the signal handler
mcontext.
Add special code for handling TLS, which for x86_64 means setting the
FS_BASE/GS_BASE registers while for i386 it means calling the
set_thread_area syscall.
Co-authored-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250602130052.545733-3-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The segv handler is called slightly differently depending on whether
PTRACE_FULL_FAULTINFO is set or not (32bit vs. 64bit). The only
difference is that we don't try to pass the registers and instruction
pointer to the segv handler.
It would be good to either document or remove the difference, but I do
not know why this difference exists. And, passing NULL can even result
in a crash.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Link: https://patch.msgid.link/20250602130052.545733-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 64111a0e22a9 ("drm/panfrost: Fix incorrect updating of current
device frequency") was a Panfrost port of a similar fix in Panthor.
Fix the Panfrost device pointer variable name so that it follows
Panfrost naming conventions.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: 64111a0e22a9 ("drm/panfrost: Fix incorrect updating of current device frequency")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250520174634.353267-6-adrian.larumbe@collabora.com
|
|
This change is essentially a Panfrost port of commit a3707f53eb3f
("drm/panthor: show device-wide list of DRM GEM objects over DebugFS").
The DebugFS file is almost the same as in Panthor, minus the GEM object
usage flags, since Panfrost has no kernel-only BO's.
Two additional GEM state flags which are displayed but aren't relevant
to Panthor are 'Purged' and 'Purgeable', since Panfrost implements an
explicit shrinker and a madvise ioctl to flag objects as reclaimable.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250520174634.353267-5-adrian.larumbe@collabora.com
|
|
Allow UM to label a BO for which it possesses a DRM handle.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250520174634.353267-4-adrian.larumbe@collabora.com
|
|
Perfcnt samples buffer is not exposed to UM, but we would like to keep
a tag on it as a potential debug aid.
PRIME imported GEM buffers are UM exposed, but since the usual Panfrost
UM driver code path is not followed in their creation, they might remain
unlabelled for their entire lifetime, so a generic tag was deemed
preferable. The tag is assigned before a UM handle is created so it
doesn't contradict the logic about labelling internal BOs.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250520174634.353267-3-adrian.larumbe@collabora.com
|
|
Functions for labelling UM-exposed an internal BOs are provided. An
example of the latter would be the Perfcnt sample buffer.
This commit is done in preparation of a following one that will allow
UM to set BO labels through a new ioctl().
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250520174634.353267-2-adrian.larumbe@collabora.com
|
|
As the message of the commit 09e6b306f3ba ("arm64: cpufeature: discover
CPU support for MPAM") already states, if a buggy firmware fails to
either enable MPAM or emulate the trap as if it were disabled, the
kernel will just fail to boot. While upgrading the firmware should be
the best solution, we have some hardware of which the vendor have made
no response 2 months after we requested a firmware update. Allow
overriding it so our devices don't become some e-waste.
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: Mingcong Bai <jeffbai@aosc.io>
Cc: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250602043723.216338-1-xry111@xry111.site
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add new inference_timeout_ms parameter that allows specifying
maximum allowed duration in milliseconds that inference can take before
triggering a recovery.
Calculate maximum number of heartbeat retries based on ratio between
inference timeout and tdr timeout.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250515093128.252041-1-jacek.lawrynowicz@linux.intel.com
|
|
Add forward declaration of struct seq_file before using it in
function prototype.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/aDlu5TGyA1WuMsvw@gondor.apana.org.au
|
|
dm_set_device_limits() should check q->limits.features for
BLK_FEAT_ATOMIC_WRITES while holding q->limits_lock, like it does for
the rest of the queue limits.
Fixes: b7c18b17a173 ("dm-table: Set BLK_FEAT_ATOMIC_WRITES for target queue limits")
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Commit 3ea277194daa ("mm, mprotect: flush TLB if potentially racing with
a parallel reclaim leaving stale TLB entries") describes a race that,
prior to the commit, could occur between reclaim and operations such as
mprotect() when using reclaim's tlbbatch mechanism. See that commit for
details but the summary is:
"""
Nadav Amit identified a theoritical race between page reclaim and
mprotect due to TLB flushes being batched outside of the PTL being held.
He described the race as follows:
CPU0 CPU1
---- ----
user accesses memory using RW PTE
[PTE now cached in TLB]
try_to_unmap_one()
==> ptep_get_and_clear()
==> set_tlb_ubc_flush_pending()
mprotect(addr, PROT_READ)
==> change_pte_range()
==> [ PTE non-present - no flush ]
user writes using cached RW PTE
...
try_to_unmap_flush()
"""
The solution was to insert flush_tlb_batched_pending() in mprotect() and
friends to explcitly drain any pending reclaim TLB flushes. In the
modern version of this solution, arch_flush_tlb_batched_pending() is
called to do that synchronisation.
arm64's tlbbatch implementation simply issues TLBIs at queue-time
(arch_tlbbatch_add_pending()), eliding the trailing dsb(ish). The
trailing dsb(ish) is finally issued in arch_tlbbatch_flush() at the end
of the batch to wait for all the issued TLBIs to complete.
Now, the Arm ARM states:
"""
The completion of the TLB maintenance instruction is guaranteed only by
the execution of a DSB by the observer that performed the TLB
maintenance instruction. The execution of a DSB by a different observer
does not have this effect, even if the DSB is known to be executed after
the TLB maintenance instruction is observed by that different observer.
"""
arch_tlbbatch_add_pending() and arch_tlbbatch_flush() conform to this
requirement because they are called from the same task (either kswapd or
caller of madvise(MADV_PAGEOUT)), so either they are on the same CPU or
if the task was migrated, __switch_to() contains an extra dsb(ish).
HOWEVER, arm64's arch_flush_tlb_batched_pending() is also implemented as
a dsb(ish). But this may be running on a CPU remote from the one that
issued the outstanding TLBIs. So there is no architectural gurantee of
synchonization. Therefore we are still vulnerable to the theoretical
race described in Commit 3ea277194daa ("mm, mprotect: flush TLB if
potentially racing with a parallel reclaim leaving stale TLB entries").
Fix this by flushing the entire mm in arch_flush_tlb_batched_pending().
This aligns with what the other arches that implement the tlbbatch
feature do.
Cc: <stable@vger.kernel.org>
Fixes: 43b3dfdd0455 ("arm64: support batched/deferred tlb shootdown during page reclamation/migration")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250530152445.2430295-1-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
LLD will occasionally error out with a '__init_end does not converge'
error if INIT_IDMAP_DIR_SIZE is defined in terms of _end, as this
results in a circular dependency.
Counter this by dimensioning the initial IDMAP page tables based on a
new boundary marker 'kimage_limit', and define it such that its value
should not change as a result of the initdata segment being pushed over
a 64k segment boundary due to changes in INIT_IDMAP_DIR_SIZE, provided
that its value doesn't change by more than 2M between linker passes.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250531123005.3866382-2-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Disassociate my name from the project over disagreements on development
practices.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/814ec73b73323a8e1c87643d193a73f467fb191f.1748034476.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It turns out [1] that the way LLD handles ASSERT()s in the linker script
can result in spurious failures, so disable them for the newly
introduced BSS symbol export checks. Since we're not aware of any issues
with the existing assertions in vmlinux.lds.S, leave those alone for now
so that they can continue to provide useful coverage.
A linker fix [2] is due to land in version 21 of LLD.
Link: https://lore.kernel.org/r/202505261019.OUlitN6m-lkp@intel.com [1]
Link: https://github.com/llvm/llvm-project/commit/5859863bab7f [2]
Link: https://github.com/ClangBuiltLinux/linux/issues/2094
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505261019.OUlitN6m-lkp@intel.com/
Link: https://lore.kernel.org/r/20250529073507.2984959-2-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit a1e40ac5b5e9 ("net: gso: fix udp gso fraglist segmentation after
pull from frag_list") detected invalid geometry in frag_list skbs and
redirects them from skb_segment_list to more robust skb_segment. But some
packets with modified geometry can also hit bugs in that code. We don't
know how many such cases exist. Addressing each one by one also requires
touching the complex skb_segment code, which risks introducing bugs for
other types of skbs. Instead, linearize all these packets that fail the
basic invariants on gso fraglist skbs. That is more robust.
If only part of the fraglist payload is pulled into head_skb, it will
always cause exception when splitting skbs by skb_segment. For detailed
call stack information, see below.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify fraglist skbs, breaking these invariants.
In extreme cases they pull one part of data into skb linear. For UDP,
this causes three payloads with lengths of (11,11,10) bytes were
pulled tail to become (12,10,10) bytes.
The skbs no longer meets the above SKB_GSO_FRAGLIST conditions because
payload was pulled into head_skb, it needs to be linearized before pass
to regular skb_segment.
skb_segment+0xcd0/0xd14
__udp_gso_segment+0x334/0x5f4
udp4_ufo_fragment+0x118/0x15c
inet_gso_segment+0x164/0x338
skb_mac_gso_segment+0xc4/0x13c
__skb_gso_segment+0xc4/0x124
validate_xmit_skb+0x9c/0x2c0
validate_xmit_skb_list+0x4c/0x80
sch_direct_xmit+0x70/0x404
__dev_queue_xmit+0x64c/0xe5c
neigh_resolve_output+0x178/0x1c4
ip_finish_output2+0x37c/0x47c
__ip_finish_output+0x194/0x240
ip_finish_output+0x20/0xf4
ip_output+0x100/0x1a0
NF_HOOK+0xc4/0x16c
ip_forward+0x314/0x32c
ip_rcv+0x90/0x118
__netif_receive_skb+0x74/0x124
process_backlog+0xe8/0x1a4
__napi_poll+0x5c/0x1f8
net_rx_action+0x154/0x314
handle_softirqs+0x154/0x4b8
[118.376811] [C201134] rxq0_pus: [name:bug&]kernel BUG at net/core/skbuff.c:4278!
[118.376829] [C201134] rxq0_pus: [name:traps&]Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
[118.470774] [C201134] rxq0_pus: [name:mrdump&]Kernel Offset: 0x178cc00000 from 0xffffffc008000000
[118.470810] [C201134] rxq0_pus: [name:mrdump&]PHYS_OFFSET: 0x40000000
[118.470827] [C201134] rxq0_pus: [name:mrdump&]pstate: 60400005 (nZCv daif +PAN -UAO)
[118.470848] [C201134] rxq0_pus: [name:mrdump&]pc : [0xffffffd79598aefc] skb_segment+0xcd0/0xd14
[118.470900] [C201134] rxq0_pus: [name:mrdump&]lr : [0xffffffd79598a5e8] skb_segment+0x3bc/0xd14
[118.470928] [C201134] rxq0_pus: [name:mrdump&]sp : ffffffc008013770
Fixes: a1e40ac5b5e9 ("gso: fix udp gso fraglist segmentation after pull from frag_list")
Signed-off-by: Shiming Cheng <shiming.cheng@mediatek.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The QPIC hardware is not capable of reporting the exact number of the
corrected bit errors, it only reports the number of the corrected bytes.
Document this behaviour in the code, and also issue a warning message
to inform the user about it.
No functional changes.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250527-qpic-snand-limited-biterr-caps-v1-1-61f7cf87be1e@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The removed dai_link->platform component cause a fail which
is exposed at runtime. (ex: when a sound tool is used)
This patch re-adds the dai_link->platform component to have
a full card registered.
Before this patch:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: HDMI [HDMI], device 0: HDMI snd-soc-dummy-dai-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
$ speaker-test -D plughw:1,0 -t sine
speaker-test 1.2.8
Playback device is plughw:1,0
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Playback open error: -22,Invalid argument
After this patch which restores the platform component:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDMI], device 0: HDMI snd-soc-dummy-dai-0 [HDMI snd-soc-dummy-dai-0]
Subdevices: 0/1
Subdevice #0: subdevice #0
-> Resolve the playback error.
Fixes: 3b0db249cf8f ("ASoC: ti: remove unnecessary dai_link->platform")
Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>
Link: https://patch.msgid.link/20250531141341.81164-1-wf.yn386@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The check is performed in prepare-step, that is dpcm_fe_dai_prepare()
but that is very late - code operates on invalid configuration from
dpcm_fe_dai_open() till it gets there. Relocate the check to the
open-step to avoid any invalid scenarios.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141231.2943351-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch updates the settings to fix the speaker noise.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250602085851.4081886-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no need for separate locks for single jobs and the entire
scheduler. The dma_fence context can be protected by the scheduler lock,
allowing for removing the jobs' locks. This simplifies things and
reduces the likelyhood of deadlocks etc.
Replace the jobs' locks with the mock scheduler lock.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250527101029.56491-2-phasta@kernel.org
|
|
File loader.c utilizes strscpy().
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The first element of the returned array stores its length. If it is 0,
any manipulation beyond the element at index 0 ends with null-ptr-deref.
Fixes: 5a565ba23abe ("ASoC: Intel: avs: Probing and firmware tracing over debugfs")
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All memory operations shall be checked.
Fixes: f2f847461fb7 ("ASoC: Intel: avs: Constrain path based on BE capabilities")
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The binaries for cAVS architecture are located in "intel/avs"
subdirectory, not "intel".
Fixes: 94aa347d34e0 ("ASoC: Intel: avs: Add MODULE_FIRMWARE to inform about FW")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Search result of avs_dai_find_path_template() shall be verified before
being used. As 'template' is already known when
avs_hw_constraints_init() is fired, drop the search entirely.
Fixes: f2f847461fb7 ("ASoC: Intel: avs: Constrain path based on BE capabilities")
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
HDAudio transfer types utilize SDxFMT for front-end (HOST) and PPLCxFMT
for back-end (LINK) side when setting up the stream. BE's
substream->runtime duplicates FE runtime so switch to using BE's
hw_params to address incorrect format values on the LINK side when FE
and BE formats differ.
The problem is introduced with commit d070002a20fc ("ASoC: Intel: avs:
HDA PCM BE operations") but the code has been shuffled around since then
so direct 'Fixes:' tag does not apply.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The procedure handling IPC timeouts and EXCEPTION_CAUGHT notification
shall cancel any D0IX work before proceeding with DSP recovery. If
SET_D0IX called from delayed_work is the failing IPC the procedure will
deadlock. Conditionally skip cancelling the work to fix that.
Fixes: 335c4cbd201d ("ASoC: Intel: avs: D0ix power state support")
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
RPM manipulation in hda_codec_probe_complete()'s error path is
superfluous and leads to RPM usage count underflow if the
build-controls operation fails.
hda_codec_probe_complete() is called in:
1) hda_codec_probe() for all non-HDMI codecs
2) in card->late_probe() for HDMI codecs
Error path for hda_codec_probe() takes care of bus' RPM already.
For 2) if late_probe() fails, ASoC performs card cleanup what
triggers hda_codec_remote() - same treatment is in 1).
Fixes: b5df2a7dca1c ("ASoC: codecs: Add HD-Audio codec driver")
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use mac_pton() instead of custom approach.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250506045117.1896661-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use pr_*() and netdev_*() to print log messages. While at it,
join split messages for easier grepping.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250506045117.1896661-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since this is called deep in the ARCH=um IRQ infrastructure
it must use a raw spinlock. It's not really part of the
driver, but rather the core UML IRQ code.
Link: https://patch.msgid.link/20250505103358.ae7dc659f8b4.I64ca7aece30e0b4b0b5b35ad89cdd63db197c0ce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 65eaac591b75 ("um: Remove obsolete legacy network transports")
removes the directory arch/um/os-Linux/drivers/, but misses to remove the
file entry in TUN/TAP DRIVER referring to that directory.
Remove this obsolete file entry. While at it, put the section name in
capital letters.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250507071004.35120-1-lukas.bulwahn@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
tgkill is a quite old syscall since kernel 2.5.75, but unfortunately glibc
doesn't support it before 2.30. Thus some systems fail to compile the
latest UserMode Linux.
Here is the compile error I encountered when I tried to compile UML in
my system shipped with glibc-2.28.
CALL scripts/checksyscalls.sh
CC arch/um/os-Linux/sigio.o
In file included from arch/um/os-Linux/sigio.c:17:
arch/um/os-Linux/sigio.c: In function ‘write_sigio_thread’:
arch/um/os-Linux/sigio.c:49:19: error: implicit declaration of function ‘tgkill’; did you mean ‘kill’? [-Werror=implicit-function-declaration]
CATCH_EINTR(r = tgkill(pid, pid, SIGIO));
^~~~~~
./arch/um/include/shared/os.h:21:48: note: in definition of macro ‘CATCH_EINTR’
#define CATCH_EINTR(expr) while ((errno = 0, ((expr) < 0)) && (errno == EINTR))
^~~~
cc1: some warnings being treated as errors
Fix it by Replacing glibc call with raw syscall.
Fixes: 33c9da5dfb18 ("um: Rewrite the sigio workaround based on epoll and tgkill")
Signed-off-by: Yongting Lin <linyongting@gmail.com>
Link: https://patch.msgid.link/20250527151222.40371-1-linyongting@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
arch/um is one of the last users of CONFIG_GENERIC_IOMAP, but upon
closer look it appears that the PCI host bridge does not register
any port I/O, and the absense of both custom inb/outb functions and
a PCI_IOBASE constant means that actually trying to use port I/O
results on a NULL pointer access.
Build testing with clang confirms this by warning about this exact
problem:
include/asm-generic/io.h:549:31: error: performing pointer arithmetic on a null pointer has undefined behavior [-Werror,-Wnull-pointer-arithmetic]
549 | val = __raw_readb(PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
Remove all the Kconfig selects that refer to legacy port I/O
and instead just build the normal MMIO path that is emulated
by the virtio PCI host.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250509084125.1488601-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There is a rare race condition when preparing for a reset where
guc_lrc_desc_unpin() could be in the process of deregistering a context
while a different thread is scrubbing outstanding contexts and it alters
the context state and does a wakeref put. Then, if there is a failure
with deregister_context(), a second wakeref put could occur. As a result
the wakeref count could drop below 0 and fail an INTEL_WAKEREF_BUG_ON()
check.
Therefore if there is a failure with deregister_context(), undo the
context state changes and do a wakeref put only if the context was set
to be destroyed earlier.
v2: Expand comment to better explain change. (Daniele)
v3: Removed addition to the original comment. (Daniele)
Fixes: 2f2cc53b5fe7 ("drm/i915/guc: Close deregister-context race against CT-loss")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Mousumi Jana <mousumi.jana@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250528230551.1855177-1-jesus.narvaez@intel.com
(cherry picked from commit f36a75aba1c3176d177964bca76f86a075d2943a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Wrong mask is used in PORT_ALPM_LFPS_CTL_FIRST_LFPS_HALF_CYCLE_DURATION and
PORT_ALPM_LFPS_CTL_LAST_LFPS_HALF_CYCLE_DURATION.
Fixes: 295099580f04 ("drm/i915/psr: Add missing ALPM AUX-Less register definitions")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250526120512.1702815-12-jouni.hogander@intel.com
(cherry picked from commit 8097128a40ff378761034ec72cdbf6f46e466dc0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
outstanding_submission_g2h
When sending a H2G message where a reply is expected in
guc_submission_send_busy_loop(), outstanding_submission_g2h is
incremented before the send. However, if there is an error sending the
message, outstanding_submission_g2h is decremented without checking if a
reply is expected.
Therefore, check if reply is expected when there is a failure before
decrementing outstanding_submission_g2h.
Fixes: 2f2cc53b5fe7 ("drm/i915/guc: Close deregister-context race against CT-loss")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Mousumi Jana <mousumi.jana@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250514225224.4142684-1-jesus.narvaez@intel.com
(cherry picked from commit a6a26786f22a4ab0227bcf610510c4c9c2df0808)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Provide test to verify a mandatory fallback to YUV420 output cannot
succeed when driver doesn't advertise YUV420 support.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-19-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Provide tests to verify drm_atomic_helper_connector_hdmi_check() helper
fallback behavior when using YUV420 output format.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-18-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Create a test EDID advertising the following capabilities:
Max resolution: 3840x2160@30Hz with RGB, YUV444, YUV422, YUV420
Max BPC: 16 for all modes
Max TMDS clock: 340 MHz
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-17-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
In preparation to extend the max TMDS rate fallback tests for covering
YUV420 output, update the rather generic function names
drm_test_check_max_tmds_rate_{bpc|format}_fallback() to properly
indicate the intended test cases.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-16-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Provide tests to verify that drm_atomic_helper_connector_hdmi_check()
helper behaviour when using YUV420 output format is to always set the
limited RGB quantization range to 'limited', no matter what the value of
Broadcast RGB property is.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-15-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Create a test EDID advertising the following capabilities:
Max resolution:
- 1920x1080@60Hz with RGB, YUV444, YUV422
- 3840x2160@30Hz with YUV420 only
Max BPC: 16 for all modes
Max TMDS clock: 200 MHz
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-14-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Replace the calls to drm_atomic_get_connector_state() with
drm_atomic_get_new_connector_state() for cases which do not require
allocating the connector state, e.g. after drm_atomic_check_only() when
the intent is to only read the new connector state.
The rational is to avoid the need to handle the potential EDEADLK error
returned by the former helper, which would require restarting the entire
atomic sequence.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-13-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Initializing HDMI connector via drmm_connector_hdmi_init() requires its
->ycbcr_420_allowed flag to be adjusted according to the supported
formats passed as function argument, prior to the actual invocation.
In order to allow providing test coverage for YUV420 modes, ensure the
flag is properly setup.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-12-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
After updating the code to make use of the new EDID setup helper,
drm_kunit_helper_connector_hdmi_init_funcs() became unused, hence drop
it.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-11-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Make use of the recently introduced macros to reduce boilerplate code
around EDID setup. This also helps dropping the redundant calls to
set_connector_edid().
No functional changes intended.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-10-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Factor out the HDMI connector initialization from
drm_kunit_helper_connector_hdmi_init_funcs() into a common
__connector_hdmi_init() function, while extending its functionality to
allow setting custom (i.e. non-default) EDID data.
Introduce a macro as a wrapper over the new helper to allow dropping the
open coded EDID setup from all test cases.
The actual conversion will be handled separately; for now just apply it
to drm_kunit_helper_connector_hdmi_init() helper.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-9-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Replace 'const char *' with 'const void *' type for current_edid member
in struct drm_atomic_helper_connector_hdmi_priv, as well as for the edid
parameter of set_connector_edid() function.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-8-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
