| Age | Commit message (Collapse) | Author |
|---|
|
Broadcom ARM-based DSL SoCs (BCM63xx product line) have the same
Broadcom SATA PHY that other SoCs are using, make it possible to select
that driver on these platforms.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Document the compatible string "brcm,bcm63138-sata-phy" as a valid
compatible string describing the standard Broadcom SATA PHY block.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Add a driver for PHY interface built into PCIe controller implemented
in UniPhier SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Add DT bindings for PHY interface built into PCIe controller implemented
in UniPhier SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Document RZ/G2M (R8A774A1) SoC bindings.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Document RZ/G2M (R8A774A1) SoC bindings.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
From the AMD BKDG, if WAKE_INT_MASTER_REG.MaskStsEn is set, a software
write to the debounce registers of *any* gpio will block wake/interrupt
status generation for *all* gpios for a length of time that depends on
WAKE_INT_MASTER_REG.MaskStsLength[11:0]. During this period the Interrupt
Delivery bit (INTERRUPT_ENABLE) will read as 0.
In commit 4c1de0414a1340 ("pinctrl/amd: poll InterruptEnable bits in
enable_irq") we tried to fix this same "gpio Interrupts are blocked
immediately after writing debounce registers" problem, but incorrectly
assumed it only affected the gpio whose debounce was being configured
and not ALL gpios.
To solve this for all gpios, we move the polling loop from
amd_gpio_irq_enable() to amd_gpio_irq_set_type(), while holding the gpio
spinlock. This ensures that another gpio operation (e.g.
amd_gpio_irq_unmask()) can read a temporarily disabled IRQ and
incorrectly disable it while trying to modify some other register bits.
Fixes: 4c1de0414a1340 pinctrl/amd: poll InterruptEnable bits in enable_irq
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Dave writes:
"Networking fixes:
1) Fix multiqueue handling of coalesce timer in stmmac, from Jose
Abreu.
2) Fix memory corruption in NFC, from Suren Baghdasaryan.
3) Don't write reserved bits in ravb driver, from Kazuya Mizuguchi.
4) SMC bug fixes from Karsten Graul, YueHaibing, and Ursula Braun.
5) Fix TX done race in mvpp2, from Antoine Tenart.
6) ipv6 metrics leak, from Wei Wang.
7) Adjust firmware version requirements in mlxsw, from Petr Machata.
8) Fix autonegotiation on resume in r8169, from Heiner Kallweit.
9) Fixed missing entries when dumping /proc/net/if_inet6, from Jeff
Barnhill.
10) Fix double free in devlink, from Dan Carpenter.
11) Fix ethtool regression from UFO feature removal, from Maciej
Żenczykowski.
12) Fix drivers that have a ndo_poll_controller() that captures the
cpu entirely on loaded hosts by trying to drain all rx and tx
queues, from Eric Dumazet.
13) Fix memory corruption with jumbo frames in aquantia driver, from
Friedemann Gerold."
* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (79 commits)
net: mvneta: fix the remaining Rx descriptor unmapping issues
ip_tunnel: be careful when accessing the inner header
mpls: allow routes on ip6gre devices
net: aquantia: memory corruption on jumbo frames
tun: remove ndo_poll_controller
nfp: remove ndo_poll_controller
bnxt: remove ndo_poll_controller
bnx2x: remove ndo_poll_controller
mlx5: remove ndo_poll_controller
mlx4: remove ndo_poll_controller
i40evf: remove ndo_poll_controller
ice: remove ndo_poll_controller
igb: remove ndo_poll_controller
ixgb: remove ndo_poll_controller
fm10k: remove ndo_poll_controller
ixgbevf: remove ndo_poll_controller
ixgbe: remove ndo_poll_controller
bonding: use netpoll_poll_dev() helper
netpoll: make ndo_poll_controller() optional
rds: Fix build regression.
...
|
|
In the iommu's shutdown handler we disable runtime-pm which could
result in the irq-handler running unclocked and since commit
3fc7c5c0cff3 ("iommu/rockchip: Handle errors returned from PM framework")
we warn about that fact.
This can cause warnings on shutdown on some Rockchip machines, so
free the irqs in the shutdown handler before we disable runtime-pm.
Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Fixes: 3fc7c5c0cff3 ("iommu/rockchip: Handle errors returned from PM framework")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Trivial fix to spelling mistake in dev_notice message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
We shouldn't attempt to DMA map the message buffers passed into this
driver from the i2c core unless the message we're mapping have been
properly setup for DMA. The i2c core indicates such a situation by
setting the I2C_M_DMA_SAFE flag, so check for that flag before using DMA
mode. We can also bounce the buffer if it isn't already mapped properly
by using the i2c_get_dma_safe_msg_buf() APIs, so do that when we
want to use DMA for a message.
This fixes a problem where the kernel oopses cleaning pages for a buffer
that's mapped into the vmalloc space. The pages are returned from
request_firmware() and passed down directly to the i2c master to write
to the i2c touchscreen device. Mapping vmalloc buffers with
dma_map_single() won't work reliably, causing an oops like below:
Unable to handle kernel paging request at virtual address ffffffc01391d000
...
Reported-by: Philip Chen <philipchen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Building a riscv kernel with CONFIG_FUNCTION_TRACER and
CONFIG_MODVERSIONS enabled results in these two warnings:
MODPOST vmlinux.o
WARNING: EXPORT symbol "return_to_handler" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
When exporting symbols from an assembly file, the MODVERSIONS code
requires their prototypes to be defined in asm-prototypes.h (see
scripts/Makefile.build). Since both of these symbols have prototypes
defined in linux/ftrace.h, include this header from RISC-V's
asm-prototypes.h.
Reported-by: Karsten Merker <merker@debian.org>
Signed-off-by: James Cowgill <jcowgill@debian.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
With CONFIG_DMA_API_DEBUG enabled we get DMA unmapping warning in
various places of the mvneta driver, for example when putting down an
interface while traffic is passing through.
The issue is when using s/w buffer management, the Rx buffers are mapped
using dma_map_page but unmapped with dma_unmap_single. This patch fixes
this by using the right unmapping function.
Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cong noted that we need the same checks introduced by commit 76c0ddd8c3a6
("ip6_tunnel: be careful when accessing the inner header")
even for ipv4 tunnels.
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Summary:
This appears to be necessary and sufficient change to enable `MPLS` on
`ip6gre` tunnels (RFC4023).
This diff allows IP6GRE devices to be recognized by MPLS kernel module
and hence user can configure interface to accept packets with mpls
headers as well setup mpls routes on them.
Test Plan:
Test plan consists of multiple containers connected via GRE-V6 tunnel.
Then carrying out testing steps as below.
- Carry out necessary sysctl settings on all containers
```
sysctl -w net.mpls.platform_labels=65536
sysctl -w net.mpls.ip_ttl_propagate=1
sysctl -w net.mpls.conf.lo.input=1
```
- Establish IP6GRE tunnels
```
ip -6 tunnel add name if_1_2_1 mode ip6gre \
local 2401:db00:21:6048:feed:0::1 \
remote 2401:db00:21:6048:feed:0::2 key 1
ip link set dev if_1_2_1 up
sysctl -w net.mpls.conf.if_1_2_1.input=1
ip -4 addr add 169.254.0.2/31 dev if_1_2_1 scope link
ip -6 tunnel add name if_1_3_1 mode ip6gre \
local 2401:db00:21:6048:feed:0::1 \
remote 2401:db00:21:6048:feed:0::3 key 1
ip link set dev if_1_3_1 up
sysctl -w net.mpls.conf.if_1_3_1.input=1
ip -4 addr add 169.254.0.4/31 dev if_1_3_1 scope link
```
- Install MPLS encap rules on node-1 towards node-2
```
ip route add 192.168.0.11/32 nexthop encap mpls 32/64 \
via inet 169.254.0.3 dev if_1_2_1
```
- Install MPLS forwarding rules on node-2 and node-3
```
// node2
ip -f mpls route add 32 via inet 169.254.0.7 dev if_2_4_1
// node3
ip -f mpls route add 64 via inet 169.254.0.12 dev if_4_3_1
```
- Ping 192.168.0.11 (node4) from 192.168.0.1 (node1) (where routing
towards 192.168.0.1 is via IP route directly towards node1 from node4)
```
ping 192.168.0.11
```
- tcpdump on interface to capture ping packets wrapped within MPLS
header which inturn wrapped within IP6GRE header
```
16:43:41.121073 IP6
2401:db00:21:6048:feed::1 > 2401:db00:21:6048:feed::2:
DSTOPT GREv0, key=0x1, length 100:
MPLS (label 32, exp 0, ttl 255) (label 64, exp 0, [S], ttl 255)
IP 192.168.0.1 > 192.168.0.11:
ICMP echo request, id 1208, seq 45, length 64
0x0000: 6000 2cdb 006c 3c3f 2401 db00 0021 6048 `.,..l<?$....!`H
0x0010: feed 0000 0000 0001 2401 db00 0021 6048 ........$....!`H
0x0020: feed 0000 0000 0002 2f00 0401 0401 0100 ......../.......
0x0030: 2000 8847 0000 0001 0002 00ff 0004 01ff ...G............
0x0040: 4500 0054 3280 4000 ff01 c7cb c0a8 0001 E..T2.@.........
0x0050: c0a8 000b 0800 a8d7 04b8 002d 2d3c a05b ...........--<.[
0x0060: 0000 0000 bcd8 0100 0000 0000 1011 1213 ................
0x0070: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223 .............!"#
0x0080: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233 $%&'()*+,-./0123
0x0090: 3435 3637 4567
```
Signed-off-by: Saif Hasan <has@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A number of our interrupts were incorrectly specified, fix both the PPI
and SPI interrupts to be correct.
Fixes: b5762cacc411 ("ARM: bcm63138: add NAND DT support")
Fixes: 46d4bca0445a ("ARM: BCM63XX: add BCM63138 minimal Device Tree")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-09-24
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Several fixes for BPF sockmap to only allow sockets being attached in
ESTABLISHED state, from John.
2) Fix up the license to LGPL/BSD for the libc compat header which contains
fallback helpers that libbpf and bpftool is using, from Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For contiguous hugetlb, huge_ptep_set_access_flags performs a
get_clear_flush (which then flushes the TLBs) even when no change of ptes
is necessary.
Unfortunately, this behaviour can lead to back-to-back page faults being
generated when running with multiple threads that access the same
contiguous huge page.
Thread 1 | Thread 2
-----------------------------+------------------------------
hugetlb_fault |
huge_ptep_set_access_flags |
-> invalidate pte range | hugetlb_fault
continue processing | wait for hugetlb_fault_mutex
release mutex and return | huge_ptep_set_access_flags
| -> invalidate pte range
hugetlb_fault
...
This patch changes huge_ptep_set_access_flags s.t. we first read the
contiguous range of ptes (whilst preserving dirty information); the pte
range is only then invalidated where necessary and this prevents further
spurious page faults.
Fixes: d8bdcff28764 ("arm64: hugetlb: Add break-before-make logic for contiguous entries")
Reported-by: Lei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In the contiguous bit hugetlb break-before-make code we assume that all
hugetlb pages are young.
In fact, remove_migration_pte is able to place an old hugetlb pte so
this assumption is not valid.
This patch fixes the contiguous hugetlb scanning code to preserve young
ptes.
Fixes: d8bdcff28764 ("arm64: hugetlb: Add break-before-make logic for contiguous entries")
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
KVM has an old optimization whereby accesses to the kernel GS base MSR
are trapped when the guest is in 32-bit and not when it is in 64-bit mode.
The idea is that swapgs is not available in 32-bit mode, thus the
guest has no reason to access the MSR unless in 64-bit mode and
32-bit applications need not pay the price of switching the kernel GS
base between the host and the guest values.
However, this optimization adds complexity to the code for little
benefit (these days most guests are going to be 64-bit anyway) and in fact
broke after commit 678e315e78a7 ("KVM: vmx: add dedicated utility to
access guest's kernel_gs_base", 2018-08-06); the guest kernel GS base
can be corrupted across SMIs and UEFI Secure Boot is therefore broken
(a secure boot Linux guest, for example, fails to reach the login prompt
about half the time). This patch just removes the optimization; the
kernel GS base MSR is now never trapped by KVM, similarly to the FS and
GS base MSRs.
Fixes: 678e315e78a780dbef384b92339c8414309dbc11
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is an issue where the host is unable to tell the gadget what frame
rate it wants if the dwFrameIntervals in the interface descriptors are
not in ascending order. This means that when instantiating a uvc gadget
via configfs the user must make sure the dwFrameIntervals are in
ascending order.
Instead of silently failing the breaking of this rule, we sort the
dwFrameIntervals upon writing to configfs.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
While checks are in place to avoid attributes and children of a format
being manipulated after the format is linked into the streaming header,
the linked flag was never actually set, invalidating the protections.
Update the flag as appropriate in the header link calls.
Signed-off-by: Joel Pepper <joel.pepper@rwth-aachen.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
- Add bFrameIndex as a UVCG_FRAME_ATTR_RO for each frame size.
- Automatically assign ascending bFrameIndex to each frame in a format.
Before all "bFrameindex" attributes were set to "1" with no way to
configure the gadget otherwise. This resulted in the host always
negotiating for bFrameIndex 1 (i.e. the first frame size of the gadget).
After the negotiation the host driver will set the user or application
selected frame size, while the gadget is actually set to the first frame
size.
Now, when the containing format is linked into the streaming header,
iterate over all child frame descriptors and assign ascending indices.
The automatically assigned indices can be read from the new read only
bFrameIndex configfs attribute in each frame descriptor item.
Signed-off-by: Joel Pepper <joel.pepper@rwth-aachen.de>
[Simplified documentation, renamed function, blank space update]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The UVC format description are numbered using the descriptor's
bFormatIndex field. The index is used in UVC requests, and is thus
needed to handle requests in userspace. Make it dynamically discoverable
by exposing it in a bFormatIndex configfs attribute of the uncompressed
and mjpeg format config items.
The bFormatIndex value exposed through the attribute is stored in the
config item private data. However, that value is never set: the driver
instead computes the bFormatIndex value when linking the stream class
header in the configfs hierarchy and stores it directly in the class
descriptors in a separate structure. In order to expose the value
through the configfs attribute, store it in the config item private data
as well. This results in a small code simplification.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The video control and video streaming interface numbers are needed in
the UVC gadget userspace stack to reply to UVC requests. They are
hardcoded to fixed values at the moment, preventing configurations with
multiple functions.
To fix this, make them dynamically discoverable by userspace through
read-only configfs attributes in <function>/control/bInterfaceNumber and
<function>/streaming/bInterfaceNumber respectively.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The UVC configfs implementation creates all groups as global static
variables. This prevents creation of multiple UVC function instances,
as they would all require their own configfs group instances.
Fix this by allocating all groups dynamically. To avoid duplicating code
around, extend the config_item_type structure with group name and
children, and implement helper functions to create children
automatically for most groups.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Some of the .allow_link() and .drop_link() operations implementations
call config_group_find_item() and then leak the reference to the
returned item. Fix this by dropping those references where needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses
the L2 driver.
The following sequence can trigger a crash
Acquires the rtnl_lock ->
Registers roce driver callback with L2 driver ->
release the rtnl lock
bnxt_re acquires the rtnl_lock ->
Request for MSIx vectors ->
release the rtnl_lock
Issue happens when bnxt_re proceeds with remaining part of initialization
and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic.
The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are
not initialized yet,
<snip>
[ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re]
[ 3551.726674] PGD 0
[ 3551.726679] Oops: 0002 1 SMP
...
[ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014
[ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000
[ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>]
bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re]
...
[ 3551.726872] Call Trace:
[ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re]
[ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en]
[ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en]
[ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en]
[ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en]
[ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en]
[ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en]
[ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250
[ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0
[ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210
[ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260
[ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30
[ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290
[ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210
[ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0
[ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880
...
[ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21
...
[ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re]
[ 3551.727175] RSP <ffff97e3173bf788>
[ 3551.727177] CR2: 0000000000000000
Avoid this inconsistent state and system crash by acquiring
the rtnl lock for the entire duration of device initialization.
Re-factor the code to remove the rtnl lock from the individual function
and acquire and release it from the caller.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add device-id for the Motorola Tetra radio MTP6550.
Bus 001 Device 004: ID 0cad:9012 Motorola CGISS
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0cad Motorola CGISS
idProduct 0x9012
bcdDevice 24.16
iManufacturer 1 Motorola Solutions, Inc.
iProduct 2 TETRA PEI interface
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 55
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 3 Generic Serial config
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Reported-by: Hans Hult <hanshult35@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Mauro briefly writes:
"media fixes for v4.19-rc5
some drivers and Kbuild fixes"
* tag 'media/v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: platform: fix cros-ec-cec build error
media: staging/media/mt9t031/Kconfig: remove bogus entry
media: i2c: mt9v111: Fix v4l2-ctrl error handling
media: camss: add missing includes
media: camss: Use managed memory allocations
media: camss: mark PM functions as __maybe_unused
media: af9035: prevent buffer overflow on write
media: video_function_calls.rst: drop obsolete video-set-attributes reference
|
|
After migration of a powerpc LPAR, the kernel executes code to
update the system state to reflect new platform characteristics.
Such changes include modifications to device tree properties provided
to the system by PHYP. Property notifications received by the
post_mobility_fixup() code are passed along to the kernel in general
through a call to of_update_property() which in turn passes such
events back to all modules through entries like the '.notifier_call'
function within the NUMA module.
When the NUMA module updates its state, it resets its event timer. If
this occurs after a previous call to stop_topology_update() or on a
system without VPHN enabled, the code runs into an unitialized timer
structure and crashes. This patch adds a safety check along this path
toward the problem code.
An example crash log is as follows.
ibmvscsi 30000081: Re-enabling adapter!
------------[ cut here ]------------
kernel BUG at kernel/time/timer.c:958!
Oops: Exception in kernel mode, sig: 5 [#1]
LE SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: nfsv3 nfs_acl nfs tcp_diag udp_diag inet_diag lockd unix_diag af_packet_diag netlink_diag grace fscache sunrpc xts vmx_crypto pseries_rng sg binfmt_misc ip_tables xfs libcrc32c sd_mod ibmvscsi ibmveth scsi_transport_srp dm_mirror dm_region_hash dm_log dm_mod
CPU: 11 PID: 3067 Comm: drmgr Not tainted 4.17.0+ #179
...
NIP mod_timer+0x4c/0x400
LR reset_topology_timer+0x40/0x60
Call Trace:
0xc0000003f9407830 (unreliable)
reset_topology_timer+0x40/0x60
dt_update_callback+0x100/0x120
notifier_call_chain+0x90/0x100
__blocking_notifier_call_chain+0x60/0x90
of_property_notify+0x90/0xd0
of_update_property+0x104/0x150
update_dt_property+0xdc/0x1f0
pseries_devicetree_update+0x2d0/0x510
post_mobility_fixup+0x7c/0xf0
migration_store+0xa4/0xc0
kobj_attr_store+0x30/0x60
sysfs_kf_write+0x64/0xa0
kernfs_fop_write+0x16c/0x240
__vfs_write+0x40/0x200
vfs_write+0xc8/0x240
ksys_write+0x5c/0x100
system_call+0x58/0x6c
Fixes: 5d88aa85c00b ("powerpc/pseries: Update CPU maps when device tree is updated")
Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Added PCI ID for Ice Lake mobile platform.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Commit 52cf93e63ee6 ("HID: i2c-hid: Don't reset device upon system resume")
removes the need for the RESEND_REPORT_DESCR quirk for Raydium devices, but
kept it for the SIS device id 10FB touchscreens, as the author of that
commit could not determine if the quirk is still necessary there.
I've tested suspend/resume on a Toshiba Click Mini L9W-B which is the
device for which this quirk was added in the first place and with the
"Don't reset device upon system resume" fix the quirk is no longer
necessary, so this commit removes it.
Note even better I also had some other devices with SIS touchscreens which
suspend/resume issues, where the RESEND_REPORT_DESCR quirk did not help.
I've also tested these devices with the "Don't reset device upon system
resume" fix and I'm happy to report that that fix also fixes touchscreen
resume on the following devices:
Asus T100HA
Asus T200TA
Peaq C1010
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull clockevent fixed from Daniel Lezcano:
- Add the CLOCK_SOURCE_SUSPEND_NONSTOP for non-am43 SoCs (Keerthy)
- Fix set_next_event handler for the fttmr010 (Tao Ren)
|
|
Commit 031a072a0b8a ("vfs: call vfs_clone_file_range() under freeze
protection") created a wrapper do_clone_file_range() around
vfs_clone_file_range() moving the freeze protection to former, so
overlayfs could call the latter.
The more common vfs practice is to call do_xxx helpers from vfs_xxx
helpers, where freeze protecction is taken in the vfs_xxx helper, so
this anomality could be a source of confusion.
It seems that commit 8ede205541ff ("ovl: add reflink/copyfile/dedup
support") may have fallen a victim to this confusion -
ovl_clone_file_range() calls the vfs_clone_file_range() helper in the
hope of getting freeze protection on upper fs, but in fact results in
overlayfs allowing to bypass upper fs freeze protection.
Swap the names of the two helpers to conform to common vfs practice
and call the correct helpers from overlayfs and nfsd.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Tested by doing clone on overlayfs while upper xfs+reflink is frozen:
xfs_io -f /ovl/y
fsfreeze -f /xfs
xfs_io> reflink /ovl/x
Before the fix xfs_io enters xfs_reflink_remap_range() and blocks
in xfs_trans_alloc(). After the fix, xfs_io blocks outside xfs code
in ovl_clone_file_range().
Fixes: 8ede205541ff ("ovl: add reflink/copyfile/dedup support")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Tested by re-writing to an open overlayfs file while upper ext4 is frozen:
xfs_io -f /ovl/x
xfs_io> pwrite 0 4096
fsfreeze -f /ext4
xfs_io> pwrite 0 4096
WARNING: CPU: 0 PID: 1492 at fs/ext4/ext4_jbd2.c:53 \
ext4_journal_check_start+0x48/0x82
After the fix, the second write blocks in ovl_write_iter() and avoids
hitting WARN_ON(sb->s_writers.frozen == SB_FREEZE_COMPLETE) in
ext4_journal_check_start().
Fixes: 2a92e07edc5e ("ovl: add ovl_write_iter()")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The memory leak was detected by kmemleak when running xfstests
overlay/051,053
Fixes: caf70cb2ba5d ("ovl: cleanup orphan index entries")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This patch fixes skb_shared area, which will be corrupted
upon reception of 4K jumbo packets.
Originally build_skb usage purpose was to reuse page for skb to eliminate
needs of extra fragments. But that logic does not take into account that
skb_shared_info should be reserved at the end of skb data area.
In case packet data consumes all the page (4K), skb_shinfo location
overflows the page. As a consequence, __build_skb zeroed shinfo data above
the allocated page, corrupting next page.
The issue is rarely seen in real life because jumbo are normally larger
than 4K and that causes another code path to trigger.
But it 100% reproducible with simple scapy packet, like:
sendp(IP(dst="192.168.100.3") / TCP(dport=443) \
/ Raw(RandString(size=(4096-40))), iface="enp1s0")
Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Reported-by: Friedemann Gerold <f.gerold@b-c-s.de>
Reported-by: Michael Rauch <michael@rauch.be>
Signed-off-by: Friedemann Gerold <f.gerold@b-c-s.de>
Tested-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
netpoll: avoid capture effects for NAPI drivers
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC).
This capture, showing one ksoftirqd eating all cycles
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
It seems that all networking drivers that do use NAPI
for their TX completions, should not provide a ndo_poll_controller() :
Most NAPI drivers have netpoll support already handled
in core networking stack, since netpoll_poll_dev()
uses poll_napi(dev) to iterate through registered
NAPI contexts for a device.
This patch series take care of the first round, we will
handle other drivers in future rounds.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
tun uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
nfp uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
bnxt uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
bnx2x uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
mlx5 uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
mlx4 uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
i40evf uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
ice uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
igb uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
