summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-17Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available cpuidle-haltpoll: do not set an owner to allow modunload cpuidle-haltpoll: return -ENODEV on modinit failure cpuidle-haltpoll: set haltpoll as preferred governor cpuidle: allow governor switch on cpuidle_register_driver() powercap: idle_inject: Use higher resolution for idle injection cpuidle: play_idle: Increase the resolution to usec cpuidle-haltpoll: vcpu hotplug support cpuidle: teo: Get rid of redundant check in teo_update() cpuidle: teo: Allow tick to be stopped if PM QoS is used cpuidle: menu: Allow tick to be stopped if PM QoS is used cpuidle: header file stubs must be "static inline" cpuidle-haltpoll: disable host side polling when kvm virtualized cpuidle: add haltpoll governor governors: unify last_state_idx cpuidle: add poll_limit_ns to cpuidle_device structure add cpuidle-haltpoll driver
2019-09-17Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: (29 commits) ACPI: PM: s2idle: Always set up EC GPE for system wakeup ACPI: PM: s2idle: Avoid rearming SCI for wakeup unnecessarily PM / wakeup: Unexport wakeup_source_sysfs_{add,remove}() PM / wakeup: Register wakeup class kobj after device is added PM / wakeup: Fix sysfs registration error path PM / wakeup: Show wakeup sources stats in sysfs PM / wakeup: Use wakeup_source_register() in wakelock.c PM / wakeup: Drop wakeup_source_init(), wakeup_source_prepare() PM: sleep: Replace strncmp() with str_has_prefix() PM: suspend: Fix platform_suspend_prepare_noirq() intel-hid: Disable button array during suspend-to-idle intel-hid: intel-vbtn: Avoid leaking wakeup_mode set ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices ACPI: EC: PM: Make acpi_ec_dispatch_gpe() print debug message ACPI: EC: PM: Consolidate some code depending on PM_SLEEP ACPI: PM: s2idle: Eliminate acpi_sleep_no_ec_events() ACPI: PM: s2idle: Switch EC over to polling during "noirq" suspend ACPI: PM: s2idle: Add acpi.sleep_no_lps0 module parameter ACPI: PM: s2idle: Rearrange lps0_device_attach() PM/sleep: Expose suspend stats in sysfs ...
2019-09-17Merge suspend-to-idle rework material for v5.4.Rafael J. Wysocki
* pm-s2idle-rework: (21 commits) ACPI: PM: s2idle: Always set up EC GPE for system wakeup ACPI: PM: s2idle: Avoid rearming SCI for wakeup unnecessarily PM: suspend: Fix platform_suspend_prepare_noirq() intel-hid: Disable button array during suspend-to-idle intel-hid: intel-vbtn: Avoid leaking wakeup_mode set ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices ACPI: EC: PM: Make acpi_ec_dispatch_gpe() print debug message ACPI: EC: PM: Consolidate some code depending on PM_SLEEP ACPI: PM: s2idle: Eliminate acpi_sleep_no_ec_events() ACPI: PM: s2idle: Switch EC over to polling during "noirq" suspend ACPI: PM: s2idle: Add acpi.sleep_no_lps0 module parameter ACPI: PM: s2idle: Rearrange lps0_device_attach() ACPI: PM: Set up EC GPE for system wakeup from drivers that need it PM: sleep: Drop dpm_noirq_begin() and dpm_noirq_end() PM: sleep: Integrate suspend-to-idle with generig suspend flow PM: sleep: Simplify suspend-to-idle control flow ACPI: PM: Set s2idle_wakeup earlier and clear it later PM: sleep: Fix possible overflow in pm_system_cancel_wakeup() ACPI: EC: Return bool from acpi_ec_dispatch_gpe() ACPICA: Return u32 from acpi_dispatch_gpe() ...
2019-09-17watchdog: f71808e_wdt: Add F81803 supportJaret Cantu
This adds watchdog support for the Fintek F81803 Super I/O chip. Testing was done on the Seneca XK-QUAD. Signed-off-by: Jaret Cantu <jaret.cantu@timesys.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190912175550.9340-1-jaret.cantu@timesys.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: qcom: remove unnecessary variable from private storageJorge Ramirez-Ortiz
there is no need to continue keeping the clock in private storage. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190906205411.31666-3-jorge.ramirez-ortiz@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: qcom: support pre-timeout when the bark irq is availableJorge Ramirez-Ortiz
Use the bark interrupt as the pre-timeout notifier whenever this interrupt is available. By default, the pretimeout notification shall occur one second earlier than the timeout. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190906205411.31666-2-jorge.ramirez-ortiz@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: imx_sc: this patch just fixes whitespacesOliver Graute
Fix only whitespace errors in imx_sc_wdt_probe() Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190905143644.20952-1-oliver.graute@kococonnector.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: apseed: Add access_cs0 option for alt-bootIvan Mikhaylov
The option for the ast2400/2500 to get access to CS0 at runtime. Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190828102402.13155-5-i.mikhaylov@yadro.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: aspeed: add support for dual bootIvan Mikhaylov
Set WDT_CLEAR_TIMEOUT_AND_BOOT_CODE_SELECTION into WDT_CLEAR_TIMEOUT_STATUS to clear out boot code source and re-enable access to the primary SPI flash chip while booted via wdt2 from the alternate chip. AST2400 datasheet says: "In the 2nd flash booting mode, all the address mapping to CS0# would be re-directed to CS1#. And CS0# is not accessible under this mode. To access CS0#, firmware should clear the 2nd boot mode register in the WDT2 status register WDT30.bit[1]." Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190828102402.13155-4-i.mikhaylov@yadro.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: orion_wdt: use timer1 as a pretimeoutChris Packham
The orion watchdog can either reset the CPU or generate an interrupt. The interrupt would be useful for debugging as it provides panic() output about the watchdog expiry, however if the interrupt is used the watchdog can't reset the CPU in the event of being stuck in a loop with interrupts disabled or if the CPU is prevented from accessing memory (e.g. an unterminated DMA). The Armada SoCs have spare timers that aren't currently used by the Linux kernel. We can use timer1 to provide a pre-timeout ahead of the watchdog timer and provide the possibility of gathering debug before the reset triggers. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190829215224.27956-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: Add i.MX7ULP watchdog supportAnson Huang
The i.MX7ULP Watchdog Timer (WDOG) module is an independent timer that is available for system use. It provides a safety feature to ensure that software is executing as planned and that the CPU is not stuck in an infinite loop or executing unintended code. If the WDOG module is not serviced (refreshed) within a certain period, it resets the MCU. Add driver support for i.MX7ULP watchdog. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1566999303-18795-2-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17dt-bindings: watchdog: Add i.MX7ULP bindingsAnson Huang
Add the watchdog bindings for Freescale i.MX7ULP. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Rob Herring <rohb@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1566999303-18795-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17dt-bindings: watchdog: sun4i: Add the watchdog clockMaxime Ripard
The Allwinner watchdog has a clock that has been described in some DT, but not all of them. The binding is also completely missing that description. Let's add that property to be consistent. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190821143835.7294-4-mripard@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17dt-bindings: watchdog: sun4i: Add the watchdog interruptsMaxime Ripard
The Allwinner watchdog has an interrupt, either shared or dedicated depending on the SoC, that has been described in some DT, but not all of them. The binding is also completely missing that description. Let's add that property to be consistent. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190821143835.7294-3-mripard@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17dt-bindings: watchdog: Convert Allwinner watchdog to a schemaMaxime Ripard
The Allwinner SoCs have a watchdog supported in Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190821143835.7294-2-mripard@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17dt-bindings: watchdog: Add YAML schemas for the generic watchdog bindingsMaxime Ripard
The watchdogs have a bunch of generic properties that are needed in a device tree. Add a YAML schemas for those. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190821143835.7294-1-mripard@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: aspeed: Add support for AST2600Ryan Chen
The ast2600 can be supported by the same code as the ast2500. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190819051738.17370-3-joel@jms.id.au Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17dt-bindings: watchdog: Add ast2600 compatibleJoel Stanley
This adds a compatible for the ast2600, a new ASPEED SoC. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190819051738.17370-2-joel@jms.id.au Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Update checked I2C functionality maskAndrey Smirnov
Update checked I2C functionality mask to reflect all of the SMBus primitives used by this driver. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-23-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data()Andrey Smirnov
There's only one user of ziirave_firm_write_block_data(), so we may as well inline it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-22-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix DOWNLOAD_START payloadAndrey Smirnov
Bootloader firmware expects the following traffic for DOWNLOAD_END: S Addr Wr [A] 0x10 [A] P using ziirave_firm_write_byte() will result in S Addr Wr [A] 0x10 [A] 0x01 [A] 0x01 [A] P which happens to work because firmware will ignore any extra bytes sent. Fix this by converting the code to use i2c_smbus_write_byte() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-21-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Drop status polling codeAndrey Smirnov
Bootloader firmware doesn't implement DOWNLOAD_START or DOWNLOAD_PACKET in a non-blocking way. It will stretch the clock of the first status byte read until the operation is complete. Polling for the status is not really necessary since it will always succed on the first try. Replace polling code with a simple single byte read to simplify things. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-20-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix RESET_PROCESSOR payloadAndrey Smirnov
Bootloader firmware expects the following traffic for RESET_PROCESSOR: S Addr Wr [A] 0x0b [A] 0x01 [A] P using ziirave_firm_write_byte() will result in S Addr Wr [A] 0x0b [A] 0x01 [A] 0x01 [A] P which happens to work because firmware will ignore any extra bytes and expected magic value matches byte count sent by i2c_smbus_write_block_data(). Fix this by converting the code to use i2c_smbus_write_byte_data() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-19-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix DOWNLOAD_END payloadAndrey Smirnov
Bootloader firmware expects the following traffic for DOWNLOAD_END: S Addr Wr [A] 0x11 [A] P using ziirave_firm_write_byte() will result in S Addr Wr [A] 0x11 [A] 0x01 [A] 0x01 [A] P which happens to work because firmware will ignore any extra bytes sent. Fix this by converting the code to use i2c_smbus_write_byte() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-18-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix JUMP_TO_BOOTLOADER payloadAndrey Smirnov
Bootloader firmware expects the following traffic for JUMP_TO_BOOTLOADER: S Addr Wr [A] 0x0c [A] 0x01 [A] P using ziirave_firm_write_byte() will result in S Addr Wr [A] 0x0c [A] 0x01 [A] 0x01 [A] P which happens to work because firmware will ignore any extra bytes and expected magic value matches byte count sent by i2c_smbus_write_block_data(). Fix this by converting the code to use i2c_smbus_write_byte_data() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-17-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix misleading error messageAndrey Smirnov
Fix misleading error message in ziirave_wdt_init_duration(). Saying "unable to set ..." implies that an attempt at communication with watchdog device has taken palce and was not successful. In this case, however, all it indicates is that no reset pulse duration was specified either via kernel parameter or Device Tree. Re-phase the log message to be more clear about benign nature of this event. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-16-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't try to program readonly flashAndrey Smirnov
Bootloader code will ignore any attempts to write data to any flash area outside of [ZIIRAVE_FIRM_FLASH_MEMORY_START; ZIIRAVE_FIRM_FLASH_MEMORY_END]. Firmware update code already have an appropriate check to skip those areas when validating updated firmware. Firmware programming code, OTOH, does not and will needlessly send no-op I2C traffic. Add an appropriate check to __ziirave_firm_write_pkt() so as to save all of that wasted effort. While at it, normalize all of the address handling code to use full 32-bit address in units of bytes and convert it to an appropriate value only in places where that is necessary. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-15-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't read out more than 'len' firmware bytesAndrey Smirnov
We only compare first 'len' bytes of read firmware, so we don't need to read more that that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-14-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't check if ihex record length is zeroAndrey Smirnov
Ihex_next_binrec() will return NULL if next record's 'len' is zero, so explicit checks for that in the driver are unnecessary. Drop them. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-13-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Make use of put_unaligned_le16Andrey Smirnov
Instead of doing this explicitly use put_unaligned_le16() to place 16-bit address value into command payload. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-12-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Zero out only what's necessaryAndrey Smirnov
Instead of zeroing out all of the packet and then overwriting a significant portion of those zeros via memcpy(), zero out only a portion of the packet that is known to not contain any data. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-11-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix incorrect use of ARRAY_SIZEAndrey Smirnov
Both memset() and ziirave_firm_write_block_data() expect length in bytes as an argument, not a number of elements in array. It just happens that in this particular case both values are equal. Modify the code to use sizeof() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-10-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Skip zeros when calculating checksumAndrey Smirnov
Zeros don't contribute anything to checksum value, so we can skip unused portion of the packet when calculating its checksum. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-9-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Check packet length only onceAndrey Smirnov
We don't need to check for packet length more than once, so drop the extra check in ziirave_firm_upload(). While at it move the check at the very start of __ziirave_firm_write_pkt(), as to not waste any time preparing a packet we'll never use. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-8-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Simplify ziirave_firm_write_pkt()Andrey Smirnov
There no reason why ziirave_firm_write_pkt() has to take firmware data via 'struct ihex_binrec' and it can just take address, data pointer and data length as individual arguments. Make this change to allow us to drastically simplify handling page crossing case by removing all of the extra code required to split 'struct ihex_binrec' into two. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-7-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Log bootloader/firmware info during probeAndrey Smirnov
Log bootloader/firmware info during probe. This information is available via sysfs already, but it's really helpful to have this in kernel log during startup as well. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-6-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't bail out on unexpected timeout valueAndrey Smirnov
Reprogramming bootloader on watchdog MCU will result in reported default timeout value of "0". That in turn will be unnecessarily rejected by the driver as invalid device (-ENODEV). Simplify probe to read stored timeout value, set it to a sane default if it is bogus, and then program that value unconditionally. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-5-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Be more verbose during firmware updateAndrey Smirnov
Add more error logging to ziirave_firm_upload() for diagnostics. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-4-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Be verbose about errors in probe()Andrey Smirnov
The driver is quite silent in case of probe failure, which makes it more difficult to diagnose problem from the kernel log. Add logging to all of the silent error paths ziirave_wdt_probe() to improve that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-3-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Add missing newlineAndrey Smirnov
Add missing newline. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-2-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: imx_sc: Remove unnecessary error logAnson Huang
An error message is already displayed by watchdog_register_device() when failed, so no need to have error log again for failure of calling devm_watchdog_register_device(). Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812084434.13316-1-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeoutRasmus Villemoes
Converting from ms to s requires dividing by 1000, not multiplying. So this is currently taking the smaller of new_timeout and 1.28e8, i.e. effectively new_timeout. The driver knows what it set max_hw_heartbeat_ms to, so use that value instead of doing a division at run-time. FWIW, this can easily be tested by booting into a busybox shell and doing "watchdog -t 5 -T 130 /dev/watchdog" - without this patch, the watchdog fires after 130&127 == 2 seconds. Fixes: b07e228eee69 "watchdog: imx2_wdt: Fix set_timeout for big timeout values" Cc: stable@vger.kernel.org # 5.2 plus anything the above got backported to Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812131356.23039-1-linux@rasmusvillemoes.dk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: cpwd: use generic compat_ptr_ioctlArnd Bergmann
The cpwd_compat_ioctl() contains a bogus mutex that dates back to a leftover BKL instance. Simplify the implementation by using the new compat_ptr_ioctl() helper function that will do the right thing for all calls here. Note that WIOCSTART/WIOCSTOP don't take any arguments, so the compat_ptr() conversion is not needed here, but it also doesn't hurt. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190814204259.120942-6-arnd@arndb.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: diag288_wdt: Remove leftover includes from conversion to watchdog APIGuenter Roeck
Commit f7a94db4e959 ("s390/watchdog: use watchdog API") converted the driver to use the watchdog API, but some includes as well as MODULE_ALIAS_MISCDEV() were missed. Cc: Philipp Hachtmann <phacht@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17Merge branch 'linux-5.4' of git://github.com/skeggsb/linux into drm-nextDave Airlie
A couple of fixes from Thierry fixing issues as a result of the reservation object rework in this cycle, as well as a fix from Lyude to allow the driver to load on Thinkpad P71. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5bLthhq7kh04A0JKxGnBdOTCxiu0hs7FZ1x3_9Rc9YoA@mail.gmail.com
2019-09-17mailbox: qcom-apcs: fix max_register valueJorge Ramirez-Ortiz
The mailbox length is 0x1000 hence the max_register value is 0xFFC. Fixes: c6a8b171ca8e ("mailbox: qcom: Convert APCS IPC driver to use regmap") Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17mailbox: qcom: Add support for IPQ8074 APCSGokul Sriram Palanisamy
Add support of IPQ8074 with IPC register offset as 8. Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17dt-bindings: mailbox: qom: Add ipq8074 APPS compatibleGokul Sriram Palanisamy
Add mailbox support required in IPQ8074 SoCs. Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17mailbox: qcom: Add support for Qualcomm SM8150 and SC7180 SoCsSibi Sankar
Add the corresponding APSS shared offset for SM8150 and SC7180 SoCs. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17dt-bindings: mailbox: Add APSS shared for SM8150 and SC7180 SoCsSibi Sankar
Add SM8150 and SC7180 APSS shared to the list of possible bindings. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-15 09:31:11 +0000