summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-26dt-bindings: display: mediatek: update dpi supported chipsJitao Shi
Add descriptions about supported chips, including MT2701 & MT8173 & mt8183 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2020-02-25bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issueMasami Hiramatsu
Since commit d8a953ddde5e ("bootconfig: Set CONFIG_BOOT_CONFIG=n by default") also changed the CONFIG_BOOTTIME_TRACING to select CONFIG_BOOT_CONFIG to show the boot-time tracing on the menu, it introduced wrong dependencies with BLK_DEV_INITRD as below. WARNING: unmet direct dependencies detected for BOOT_CONFIG Depends on [n]: BLK_DEV_INITRD [=n] Selected by [y]: - BOOTTIME_TRACING [=y] && TRACING_SUPPORT [=y] && FTRACE [=y] && TRACING [=y] This makes the CONFIG_BOOT_CONFIG selects CONFIG_BLK_DEV_INITRD to fix this error and make CONFIG_BOOTTIME_TRACING=n by default, so that both boot-time tracing and boot configuration off but those appear on the menu list. Link: http://lkml.kernel.org/r/158264140162.23842.11237423518607465535.stgit@devnote2 Fixes: d8a953ddde5e ("bootconfig: Set CONFIG_BOOT_CONFIG=n by default") Reported-by: Randy Dunlap <rdunlap@infradead.org> Compiled-tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-25hwmon: (pmbus/xdpe12284) Add callback for vout limits conversionVadim Pasternak
Provide read_word_data() callback for overvoltage and undervoltage output readouts conversion. These registers are presented in 'slinear11' format, while default conversion for 'vout' class for the devices is 'vid'. It is resulted in wrong conversion in pmbus_reg2data() for in{3-4}_lcrit and in{3-4}_crit attributes. ) Fixes: aaafb7c8eb1c ("hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Link: https://lore.kernel.org/r/20200224225202.19576-1-vadimp@mellanox.com [gropeck: Adjusted to mainline PMBus API] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-02-25drm/panfrost: Add support for multiple power domainsNicolas Boichat
When there is a single power domain per device, the core will ensure the power domain is switched on (so it is technically equivalent to having not power domain specified at all). However, when there are multiple domains, as in MT8183 Bifrost GPU, we need to handle them in driver code. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200207052627.130118-6-drinkcat@chromium.org
2020-02-25drm/panfrost: Add support for multiple regulatorsNicolas Boichat
Some GPUs, namely, the bifrost/g72 part on MT8183, have a second regulator for their SRAM, let's add support for that. We extend the framework in a generic manner so that we could support more than 2 regulators, if required. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Steven Price <steven.price@arm.com> Reviwed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200207052627.130118-5-drinkcat@chromium.org
2020-02-25drm/panfrost: Improve error reporting in panfrost_gpu_power_onNicolas Boichat
It is useful to know which component cannot be powered on. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200207052627.130118-4-drinkcat@chromium.org
2020-02-25io-wq: ensure work->task_pid is cleared on initJens Axboe
We use ->task_pid for exit cancellation, but we need to ensure it's cleared to zero for io_req_work_grab_env() to do the right thing. Take a suggestion from Bart and clear the whole thing, just setting the function passed in. This makes it more future proof as well. Fixes: 36282881a795 ("io-wq: add io_wq_cancel_pid() to cancel based on a specific pid") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25drm/panfrost: Don't try to map on error faultsTomeu Vizoso
If the exception type isn't a translation fault, don't try to map and instead go straight to a terminal fault. Otherwise, we can get flooded by kernel warnings and further faults. Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations") Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200212202236.13095-1-robh@kernel.org
2020-02-25drm/i915/gem: Honour O_NONBLOCK before throttling execbuf submissionsChris Wilson
Check the user's flags on the struct file before deciding whether or not to stall before submitting a request. This allows us to reasonably cheaply honour O_NONBLOCK without checking at more critical phases during request submission. Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Steve Carbonari <steven.carbonari@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200225192206.1107336-3-chris@chris-wilson.co.uk
2020-02-25drm/i915: Allow userspace to specify ringsize on constructionChris Wilson
No good reason why we must always use a static ringsize, so let userspace select one during construction. Link: https://github.com/intel/compute-runtime/pull/261 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Steve Carbonari <steven.carbonari@intel.com> Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200225192206.1107336-2-chris@chris-wilson.co.uk
2020-02-25drm/i915: Flush idle barriers when waitingChris Wilson
If we do find ourselves with an idle barrier inside our active while waiting, attempt to flush it by emitting a pulse using the kernel context. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Steve Carbonari <steven.carbonari@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200225192206.1107336-1-chris@chris-wilson.co.uk
2020-02-25icmp: allow icmpv6_ndo_send to work with CONFIG_IPV6=nJason A. Donenfeld
The icmpv6_send function has long had a static inline implementation with an empty body for CONFIG_IPV6=n, so that code calling it doesn't need to be ifdef'd. The new icmpv6_ndo_send function, which is intended for drivers as a drop-in replacement with an identical function signature, should follow the same pattern. Without this patch, drivers that used to work with CONFIG_IPV6=n now result in a linker error. Cc: Chen Zhou <chenzhou10@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 0b41713b6066 ("icmp: introduce helper for nat'd source address in network device context") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-25drm/i915: Update DRIVER_DATE to 20200225Rodrigo Vivi
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-02-25Merge tag 'riscv-for-linux-5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "This contains a handful of RISC-V related fixes that I've collected and would like to target for 5.6-rc4: - A fix to set up the PMPs on boot, which allows the kernel to access memory on systems that don't set up permissive PMPs before getting to Linux. This only effects machine-mode kernels, which currently means only NOMMU kernels. - A fix to avoid enabling supervisor-mode interrupts when running in machine-mode, also only for NOMMU kernels. - A pair of fixes to our KASAN support to avoid corrupting memory. - A gitignore fix. This boots on QEMU's virt board for me" * tag 'riscv-for-linux-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: adjust the indent riscv: allocate a complete page size for each page table riscv: Fix gitignore RISC-V: Don't enable all interrupts in trap_init() riscv: set pmp configuration if kernel is running in M-mode
2020-02-25Merge branch 'mips-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "Here are a few MIPS fixes, and a MAINTAINERS update to hand over MIPS maintenance to Thomas Bogendoerfer - this will be my final pull request as MIPS maintainer. Thanks for your helpful comments, useful corrections & responsiveness during the time I've fulfilled the role, and I'm sure I'll pop up elsewhere in the tree somewhere down the line" * 'mips-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MAINTAINERS: Hand MIPS over to Thomas MIPS: ingenic: DTS: Fix watchdog nodes MIPS: X1000: Fix clock of watchdog node. MIPS: vdso: Wrap -mexplicit-relocs in cc-option MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()' MIPS: cavium_octeon: Fix syncw generation. mips: vdso: add build time check that no 'jalr t9' calls left MIPS: Disable VDSO time functionality on microMIPS mips: vdso: fix 'jalr t9' crash in vdso code
2020-02-25Merge drm/drm-next into drm-intel-next-queuedRodrigo Vivi
Some DSI and VBT pending patches from Hans will apply cleanly and with less ugly conflicts if they are rebuilt on top of other patches that recently landed on drm-next. Reference: https://patchwork.freedesktop.org/series/70952/ Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com
2020-02-25dm integrity: fix invalid table returned due to argument count mismatchMikulas Patocka
If the flag SB_FLAG_RECALCULATE is present in the superblock, but it was not specified on the command line (i.e. ic->recalculate_flag is false), dm-integrity would return invalid table line - the reported number of arguments would not match the real number. Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode") Cc: stable@vger.kernel.org # v5.2+ Reported-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-25dm integrity: fix a deadlock due to offloading to an incorrect workqueueMikulas Patocka
If we need to perform synchronous I/O in dm_integrity_map_continue(), we must make sure that we are not in the map function - in order to avoid the deadlock due to bio queuing in generic_make_request. To avoid the deadlock, we offload the request to metadata_wq. However, metadata_wq also processes metadata updates for write requests. If there are too many requests that get offloaded to metadata_wq at the beginning of dm_integrity_map_continue, the workqueue metadata_wq becomes clogged and the system is incapable of processing any metadata updates. This causes a deadlock because all the requests that need to do metadata updates wait for metadata_wq to proceed and metadata_wq waits inside wait_and_add_new_range until some existing request releases its range lock (which doesn't happen because the range lock is released after metadata update). In order to fix the deadlock, we create a new workqueue offload_wq and offload requests to it - so that processing of offload_wq is independent from processing of metadata_wq. Fixes: 7eada909bfd7 ("dm: add integrity target") Cc: stable@vger.kernel.org # v4.12+ Reported-by: Heinz Mauelshagen <heinzm@redhat.com> Tested-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-25dm integrity: fix recalculation when moving from journal mode to bitmap modeMikulas Patocka
If we resume a device in bitmap mode and the on-disk format is in journal mode, we must recalculate anything above ic->sb->recalc_sector. Otherwise, there would be non-recalculated blocks which would cause I/O errors. Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-25null_blk: remove unused fields in 'nullb_cmd'Dongli Zhang
'list', 'll_list' and 'csd' are no longer used. The 'list' is not used since it was introduced by commit f2298c0403b0 ("null_blk: multi queue aware block test driver"). The 'll_list' is no longer used since commit 3c395a969acc ("null_blk: set a separate timer for each command"). The 'csd' is no longer used since commit ce2c350b2cfe ("null_blk: use blk_complete_request and blk_mq_complete_request"). Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25amdgpu/gmc_v9: save/restore sdpif regs during S3Shirish S
fixes S3 issue with IOMMU + S/G enabled @ 64M VRAM. Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-02-25drm/amdgpu: fix memory leak during TDR test(v2)Monk Liu
fix system memory leak v2: fix coding style Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: limit display clock to 100MHz to avoid FIFO errorYu-ting Shen
[Why] when changing display clock, SMU need to use power up DFS and use DENTIST to ramp DFS DID to switch target frequency before switching back to bypass. [How] fixed the minimum display clock to 100MHz, it's W/A the same with PCO. Signed-off-by: Yu-ting Shen <Yu-ting.Shen@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Access patches from stream for ignore MSA monitor patchJaehyun Chung
[Why] System will crash when trying to access local sink in core_link_enable_stream in MST case. [How] Access patches directly from stream. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Temporarily disable stutter on MPO transitionGeorge Shen
[Why] Underflow sometimes occurs during transition into MPO with stutter enabled. [How] When transitioning into MPO, disable stutter. Re-enable stutter within one frame. Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Make clock table struct more accessibleSung Lee
[WHY] Currently clock table struct is very far down in the bounding box struct making it hard to find while debugging, especially when using the dal3dbgext. [HOW] Move it up so it is the first struct defined, and therefore much easier to find and access. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: optimize prgoram wm and clksYongqiang Sun
[Why] In some display configuration like 1080P monitor playing a 1080P video, if user use ALT+F4 to exit Movie and TV, there is a chance clocks are same only water mark changed. Current clock optimization machanism will result in water mark keeps high after exit Movie and TV app. [How] Return if watermark need to be optimized when doing program watermark, perform the optimization after. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: correct dml surface size assignmentDmytro Laktyushkin
Need to assign surface size rather than viewport size for surface size dml variable. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Update TTU properlyAlvin Lee
[Why] We need to update TTU properly if DRAMClockChangeWatermark changes. If TTU < DRAMClockChangeWatermark, we pstate won't be allowed and we will hang in some PSR cases. [How] Update TTU if DramClockChangeWatermark value increases (only if TTU was dependent on the watermark value on the DRAMClockChangeWatermark value in the first place). Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Fix RV2 Variant DetectionMichael Strauss
[WHY] RV2 and variants are indistinguishable by hw internal rev alone, need to be distinguishable in order to correctly set max vlevel. Previous detection change incorrectly checked for hw internal rev. [HOW] Use pci revision to check if RV2 or low power variant Correct a few overlapping ASICREV range checks Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Michael Strauss <Michael.Strauss@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Add driver support for enabling PSR on DMCUBWyatt Wood
[Why] We want to be able to enable PSR on DMCUB, and fallback to DMCU when necessary. [How] Add infrastructure to enable and disable PSR on DMCUB. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: 3.2.74Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: remove unused dml variableDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: update dml input population functionDmytro Laktyushkin
Update dcn20_populate_dml_pipes_from_context to correctly handle odm when no surface is provided. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Add visual confirm support for FreeSync 2 ARGB2101010Peikang Zhang
[Why] DalMPVisualConfirm does not support FreeSync 2 ARGB2101010 which causes black visual confirm bar when playing HDR video on FreeSync 2 display in full screen mode [How] Added pink color for DalMPVisualConfirm on FreeSync 2 ARGB2101010 surface Signed-off-by: Peikang Zhang <peikang.zhang@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Link training TPS1 workaroundMartin Leung
[Why] Previously implemented early_cr_pattern was link level but the whole asic should be affected. [How] - change old link flag to dc level - new bit in dc->work_arounds set by DM Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Monitor patch to delay setting ignore MSA bitJaehyun Chung
[Why] Some displays clear ignore MSA bit on mode change, which cause blackscreen when programming variable vtotals. Ignore MSA bit needs programming needs to be delayed or re-set to be retained. [How] Create patch to delay programming ignore MSA bit after unblanking stream. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Workaround required for link training reliabilityDavid Galiffi
[Why] A software workaround is required for all vendor-built cards on platform. [How] When performing DP link training, we must send TPS1 before DPCD:100h is written with the proper bit rate value. This change must be applies in ALL cases when LT happens. Signed-off-by: David Galiffi <David.Galiffi@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Revert "DCN2.x Do not program DPPCLK if same value"Sung Lee
[WHY] Not programming dto with same values causes test failures in DCN2 diags DPP tests. [HOW] This reverts commit 1b53e733238c0f7faa4744ec7c8c6f193649f168. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Add DMUB firmware state debugfsNicholas Kazlauskas
[Why] Firmware state helps to debug sequence issues and hangs for DMCUB commands and we don't have an easy mechanism to dump it from the driver. [How] Add a debugfs entry to dump the current firmware state. Example usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_dmub_fw_state Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: programming last delta in output transfer function LUT to a ↵Vladimir Stempen
correct value [Why] Currently DAL programs negative slope for the last point of output transfer function curve. [How] Applying a check for the last PWL point for RGB values not to be smaller than previous. If smaller, initialize the last point values to a sum of previous PWL value and previous PWL delta; Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: make some rn_clk_mgr structs and funcs staticAnthony Koo
[Why] There are some structures and functions meant only to be used in the scope of that single rn_clk_mgr c file. [How] Make structs and funcs static if only meant to be used within rn_clk_mgr Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Add function pointers for panel related hw functionsAnthony Koo
[Why] Make panel backlight and power on/off functions into hardware specific function pointers [How] Add function pointers for panel related hw functions - is_panel_powered_on - is_panel_backlight_on Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Fix HDMI repeater authenticationBhawanpreet Lakha
when the rxstatus split was done the index was incorrect. This lead to HDMI repeater authentication failure for HDCP2.X So fix it Fixes: 302169003733 ("drm/amd/display: split rxstatus for hdmi and dp") Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: 3.2.73Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Only round InfoFrame refresh ratesAric Cyr
[Why] When calculating nominal refresh rates, don't round. Only the VSIF needs to be rounded. [How] Revert rounding change for nominal and just round when forming the FreeSync VSIF. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: System crashes when add_ptb_to_table() gets calledPeikang Zhang
[Why] Unused VMIDs were not evicted correctly [How] 1. evict_vmids() logic was fixed; 2. Added boundary check for add_ptb_to_table() and clear_entry_from_vmid_table() to avoid crash caused by array out of boundary; 3. For mod_vmid_get_for_ptb(), vimd is changed from unsigned to signed due to vimd is signed. Signed-off-by: Peikang Zhang <peikang.zhang@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: do not force UCLK DPM to stay at highest state during ↵Samson Tam
display off in DCN2 [Why] Add optimization to allow pstate change support when all displays are off in DCN2. [How] Add clk_mgr_helper_get_active_plane_cnt() to sum plane_count for all valid stream_status[]. If plane_count is 0, then there are no active or virtual streams present. Use plane_count == 0 as extra condition to enable p_state_change_support in dcn2_update_clocks(). Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Add dmcu f/w loading for NV12Roman Li
[Why] We need DMCU for features like PSR and ABM. [How] Add path to dmcu firmware binary and load it for Navi12. Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Don't ask PSP to load DMCUB for backdoor loadNicholas Kazlauskas
[Why] If we're doing backdoor load then do it entirely ourselves without invoking any of the frontdoor path to avoid potential issues with outdated tOS. [How] Check the load type and don't pass it to base if we don't want it loaded. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-14 15:06:04 +0000