summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-20Merge branch 'bnxt_en-shutdown-and-kexec-kdump-related-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: shutdown and kexec/kdump related fixes. 2 small patches to fix kexec shutdown and kdump kernel driver init issues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.Vasundhara Volam
If crashed kernel does not shutdown the NIC properly, PCIe FLR is required in the kdump kernel in order to initialize all the functions properly. Fixes: d629522e1d66 ("bnxt_en: Reduce memory usage when running in kdump kernel.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20bnxt_en: Improve device shutdown method.Vasundhara Volam
Especially when bnxt_shutdown() is called during kexec, we need to disable MSIX and disable Bus Master to completely quiesce the device. Make these 2 calls unconditionally in the shutdown method. Fixes: c20dc142dd7b ("bnxt_en: Disable bus master during PCI shutdown and driver unload.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: netlink: cap max groups which will be considered in netlink_bind()Nikolay Aleksandrov
Since nl_groups is a u32 we can't bind more groups via ->bind (netlink_bind) call, but netlink has supported more groups via setsockopt() for a long time and thus nlk->ngroups could be over 32. Recently I added support for per-vlan notifications and increased the groups to 33 for NETLINK_ROUTE which exposed an old bug in the netlink_bind() code causing out-of-bounds access on archs where unsigned long is 32 bits via test_bit() on a local variable. Fix this by capping the maximum groups in netlink_bind() to BITS_PER_TYPE(u32), effectively capping them at 32 which is the minimum of allocated groups and the maximum groups which can be bound via netlink_bind(). CC: Christophe Leroy <christophe.leroy@c-s.fr> CC: Richard Guy Briggs <rgb@redhat.com> Fixes: 4f520900522f ("netlink: have netlink per-protocol bind function return an error code.") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: thunderx: workaround BGX TX Underflow issueTim Harvey
While it is not yet understood why a TX underflow can easily occur for SGMII interfaces resulting in a TX wedge. It has been found that disabling/re-enabling the LMAC resolves the issue. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Robert Jones <rjones@gateworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20ionic: fix fw_status readShannon Nelson
The fw_status field is only 8 bits, so fix the read. Also, we only want to look at the one status bit, to allow for future use of the other bits, and watch for a bad PCI read. Fixes: 97ca486592c0 ("ionic: add heartbeat check") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20Merge branch 'next-integrity' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull IMA fixes from Mimi Zohar: "Two bug fixes and an associated change for each. The one that adds SM3 to the IMA list of supported hash algorithms is a simple change, but could be considered a new feature" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: add sm3 algorithm to hash algorithm configuration list crypto: rename sm3-256 to sm3 in hash_algo_name efi: Only print errors about failing to get certs if EFI vars are found x86/ima: use correct identifier for SetupMode variable
2020-02-20net: disable BRIDGE_NETFILTER by defaultRoman Kiryanov
The description says 'If unsure, say N.' but the module is built as M by default (once the dependencies are satisfied). When the module is selected (Y or M), it enables NETFILTER_FAMILY_BRIDGE and SKB_EXTENSIONS which alter kernel internal structures. We (Android Studio Emulator) currently do not use this module and think this it is more consistent to have it disabled by default as opposite to disabling it explicitly to prevent enabling NETFILTER_FAMILY_BRIDGE and SKB_EXTENSIONS. Signed-off-by: Roman Kiryanov <rkir@google.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: macb: Properly handle phylink on at91rm9200Alexandre Belloni
at91ether_init was handling the phy mode and speed but since the switch to phylink, the NCFGR register got overwritten by macb_mac_config(). The issue is that the RM9200_RMII bit and the MACB_CLK_DIV32 field are cleared but never restored as they conflict with the PAE, GBE and PCSSEL bits. Add new capability to differentiate between EMAC and the other versions of the IP and use it to set and avoid clearing the relevant bits. Also, this fixes a NULL pointer dereference in macb_mac_link_up as the EMAC doesn't use any rings/bufffers/queues. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20bootconfig: Print array as multiple commands for legacy command lineMasami Hiramatsu
Print arraied values as multiple same options for legacy kernel command line. With this rule, if the "kernel.*" and "init.*" array entries in bootconfig are printed out as multiple same options, e.g. kernel { console = "ttyS0,115200" console += "tty0" } will be correctly converted to console="ttyS0,115200" console="tty0" in the kernel command line. Link: http://lkml.kernel.org/r/158220118213.26565.8163300497009463916.stgit@devnote2 Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20bootconfig: Reject subkey and value on same parent keyMasami Hiramatsu
Reject if a value node is mixed with subkey node on same parent key node. A value node can not co-exist with subkey node under some key node, e.g. key = value key.subkey = another-value This is not be allowed because bootconfig API is not designed to handle such case. Link: http://lkml.kernel.org/r/158220115232.26565.7792340045009731803.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20tools/bootconfig: Remove unneeded error message silencerMasami Hiramatsu
Remove error message silent knob, we don't need it anymore because we can check if there is a bootconfig by checking the magic word. If there is a magic word, but failed to load a bootconfig from initrd, there is a real problem. Link: http://lkml.kernel.org/r/158220113256.26565.14264598654427773104.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20bootconfig: Add bootconfig magic word for indicating bootconfig explicitlyMasami Hiramatsu
Add bootconfig magic word to the end of bootconfig on initrd image for indicating explicitly the bootconfig is there. Also tools/bootconfig treats wrong size or wrong checksum or parse error as an error, because if there is a bootconfig magic word, there must be a bootconfig. The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word. Thus the block image of the initrd file with bootconfig is as follows. [Initrd][bootconfig][size][csum][#BOOTCONFIG\n] Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2 Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20bootconfig: Set CONFIG_BOOT_CONFIG=n by defaultMasami Hiramatsu
Set CONFIG_BOOT_CONFIG=n by default. This also warns user if CONFIG_BOOT_CONFIG=n but "bootconfig" is given in the kernel command line. Link: http://lkml.kernel.org/r/158220111291.26565.9036889083940367969.stgit@devnote2 Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20tracing: Clear trace_state when starting traceMasami Hiramatsu
Clear trace_state data structure when starting trace in __synth_event_trace_start() internal function. Currently trace_state is initialized only in the synth_event_trace_start() API, but the trace_state in synth_event_trace() and synth_event_trace_array() are on the stack without initialization. This means those APIs will see wrong parameters and wil skip closing process in __synth_event_trace_end() because trace_state->disabled may be !0. Link: http://lkml.kernel.org/r/158193315899.8868.1781259176894639952.stgit@devnote2 Reviewed-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20bootconfig: Mark boot_config_checksum() staticQiujun Huang
In fact, this function is only used in this file, so mark it with 'static'. Link: http://lkml.kernel.org/r/1581852511-14163-1-git-send-email-hqjagain@gmail.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20tracing: Disable trace_printk() on post poned testsSteven Rostedt (VMware)
The tracing seftests checks various aspects of the tracing infrastructure, and one is filtering. If trace_printk() is active during a self test, it can cause the filtering to fail, which will disable that part of the trace. To keep the selftests from failing because of trace_printk() calls, trace_printk() checks the variable tracing_selftest_running, and if set, it does not write to the tracing buffer. As some tracers were registered earlier in boot, the selftest they triggered would fail because not all the infrastructure was set up for the full selftest. Thus, some of the tests were post poned to when their infrastructure was ready (namely file system code). The postpone code did not set the tracing_seftest_running variable, and could fail if a trace_printk() was added and executed during their run. Cc: stable@vger.kernel.org Fixes: 9afecfbb95198 ("tracing: Postpone tracer start-up tests till the system is more robust") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20tracing: Have synthetic event test use raw_smp_processor_id()Steven Rostedt (VMware)
The test code that tests synthetic event creation pushes in as one of its test fields the current CPU using "smp_processor_id()". As this is just something to see if the value is correctly passed in, and the actual CPU used does not matter, use raw_smp_processor_id(), otherwise with debug preemption enabled, a warning happens as the smp_processor_id() is called without preemption enabled. Link: http://lkml.kernel.org/r/20200220162950.35162579@gandalf.local.home Reviewed-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20xen: Enable interrupts when calling _cond_resched()Thomas Gleixner
xen_maybe_preempt_hcall() is called from the exception entry point xen_do_hypervisor_callback with interrupts disabled. _cond_resched() evades the might_sleep() check in cond_resched() which would have caught that and schedule_debug() unfortunately lacks a check for irqs_disabled(). Enable interrupts around the call and use cond_resched() to catch future issues. Fixes: fdfd811ddde3 ("x86/xen: allow privcmd hypercalls to be preempted") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/878skypjrh.fsf@nanos.tec.linutronix.de Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-02-20ASoC: pcm512x: Fix unbalanced regulator enable call in probe error pathMatthias Reichl
When we get a clock error during probe we have to call regulator_bulk_disable before bailing out, otherwise we trigger a warning in regulator_put. Fix this by using "goto err" like in the error cases above. Fixes: 5a3af1293194d ("ASoC: pcm512x: Add PCM512x driver") Signed-off-by: Matthias Reichl <hias@horus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200220202956.29233-1-hias@horus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-20tracing: Fix number printing bug in print_synth_event()Tom Zanussi
Fix a varargs-related bug in print_synth_event() which resulted in strange output and oopses on 32-bit x86 systems. The problem is that trace_seq_printf() expects the varargs to match the format string, but print_synth_event() was always passing u64 values regardless. This results in unspecified behavior when unpacking with va_arg() in trace_seq_printf(). Add a function that takes the size into account when calling trace_seq_printf(). Before: modprobe-1731 [003] .... 919.039758: gen_synth_test: next_pid_field=777(null)next_comm_field=hula hoops ts_ns=1000000 ts_ms=1000 cpu=3(null)my_string_field=thneed my_int_field=598(null) After: insmod-1136 [001] .... 36.634590: gen_synth_test: next_pid_field=777 next_comm_field=hula hoops ts_ns=1000000 ts_ms=1000 cpu=1 my_string_field=thneed my_int_field=598 Link: http://lkml.kernel.org/r/a9b59eb515dbbd7d4abe53b347dccf7a8e285657.1581720155.git.zanussi@kernel.org Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20tracing: Check that number of vals matches number of synth event fieldsTom Zanussi
Commit 7276531d4036('tracing: Consolidate trace() functions') inadvertently dropped the synth_event_trace() and synth_event_trace_array() checks that verify the number of values passed in matches the number of fields in the synthetic event being traced, so add them back. Link: http://lkml.kernel.org/r/32819cac708714693669e0dfe10fe9d935e94a16.1581720155.git.zanussi@kernel.org Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20tracing: Make synth_event trace functions endian-correctTom Zanussi
synth_event_trace(), synth_event_trace_array() and __synth_event_add_val() write directly into the trace buffer and need to take endianness into account, like trace_event_raw_event_synth() does. Link: http://lkml.kernel.org/r/2011354355e405af9c9d28abba430d1f5ff7771a.1581720155.git.zanussi@kernel.org Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20tracing: Make sure synth_event_trace() example always uses u64Tom Zanussi
synth_event_trace() is the varargs version of synth_event_trace_array(), which takes an array of u64, as do synth_event_add_val() et al. To not only be consistent with those, but also to address the fact that synth_event_trace() expects every arg to be of the same type since it doesn't also pass in e.g. a format string, the caller needs to make sure all args are of the same type, u64. u64 is used because it needs to accomodate the largest type available in synthetic events, which is u64. This fixes the bug reported by the kernel test robot/Rong Chen. Link: https://lore.kernel.org/lkml/20200212113444.GS12867@shao2-debian/ Link: http://lkml.kernel.org/r/894c4e955558b521210ee0642ba194a9e603354c.1581720155.git.zanussi@kernel.org Fixes: 9fe41efaca084 ("tracing: Add synth event generation test module") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20drm/i915/tgl: Program MBUS_ABOX{1,2}_CTL during display initMatt Roper
On gen11 we only needed to program MBus credits into MBUS_ABOX_CTL during display initialization, but on gen12 we're now supposed to program the same values into MBUS_ABOX1_CTL and MBUS_ABOX2_CTL as well. v2: - Program registers with rmw to preserve contents of unrelated bits. - Switch to the new display uncore helpers. Bspec: 49213 Bspec: 50096 Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-2-matthew.d.roper@intel.com Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
2020-02-20drm/i915: Program MBUS with rmw during initializationMatt Roper
It wasn't terribly clear from the bspec's wording, but after discussion with the hardware folks, it turns out that we need to preserve the pre-existing contents of the MBUS ABOX control register when initializing a few specific bits. Bspec: 49213 Bspec: 50096 Fixes: 4cb4585e5a7f ("drm/i915/icl: initialize MBus during display init") Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.com Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
2020-02-20drm/i915: Use intel_de_write_fw() for skl+ scaler registersVille Syrjälä
We have to write quite a few registers when programming the pipe scaler. Let's use intel_de_write_fw() for these to reduce the lockdep overhead a bit. All plane registers (including plane scaler) already do this. We already had a few accidental intel_de_write_fw() in there. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200212161738.28141-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2020-02-20drm/i915: Parametrize PFIT_PIPEVille Syrjälä
Make the PFIT_PIPE stuff less ugly via parametrization. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200212161738.28141-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2020-02-20drm/i915: Mark all HPD capabled connectors as suchVille Syrjälä
Currently we only set the DRM_CONNECTOR_POLL_{DISCONNECT,CONNECT} bits in intel_connector->polled (the base setting), leading to some confusing looking code to reset drm_connector->polled (the actual setting) to DRM_CONNECTOR_POLL_HPD. Let's set intel_connector->polled = DRM_CONNECTOR_POLL_HPD for all hpd capable connectors, and then we don't need so many special cases in the hotplug code. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200205183546.9291-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2020-02-20drm/i915/hpd: Replace the loop-within-loop with two independent loopsVille Syrjälä
No point in looping over all connectors for each hpd pin. Just loop over each connector first and deal with each one's hpd pin. Then loop over all the hpd pins to mark them as enabled again. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200205183546.9291-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2020-02-20drm/i915: Add i9xx_lut_8()Ville Syrjälä
We have a nice little helper to compute a single LUT entry for everything except the 8bpc legacy gamma mode. Let's complete the set. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107151725.10507-5-ville.syrjala@linux.intel.com Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
2020-02-21Merge tag 'drm-misc-next-2020-02-10' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.7: UAPI Changes: - lima: Add support for heap buffers Cross-subsystem Changes: Core Changes: - Implement mode_config mode_valid for memory constrained drivers - Bus format negociation between bridges - Consolidate fake vblank events for drivers without vblank interrupts - drm/bufs: dma_alloc related cleanups - drm/dp_mst: Various fixes - drm/print: New drm_device based print helpers - Thomas is a drm-misc maintainer now! Driver Changes: - DPMS cleanups for atomic drivers - Removal of owner field in SPI tinydrm drivers - Removal of explicit dependency on DT for tinydrm drivers - Conversion to YAML schemas for DT bindings - tidss: New driver - virtio: various reworks and fixes - Our usual dozen or so new panels or bridges Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200210093421.xu4sofldm6wm6xq6@gilmour.lan
2020-02-20Merge branch 's390-fixes'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: fixes 2020-02-20 please apply the following patch series for qeth to netdev's net tree. This corrects three minor issues: 1) return a more fitting errno when VNICC cmds are not supported, 2) remove a bogus WARN in the NAPI code, and 3) be _very_ pedantic about the RX copybreak. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20s390/qeth: fix off-by-one in RX copybreak checkJulian Wiedmann
The RX copybreak is intended as the _max_ value where the frame's data should be copied. So for frame_len == copybreak, don't build an SG skb. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20s390/qeth: don't warn for napi with 0 budgetJulian Wiedmann
Calling napi->poll() with 0 budget is a legitimate use by netpoll. Fixes: a1c3ed4c9ca0 ("qeth: NAPI support for l2 and l3 discipline") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20s390/qeth: vnicc Fix EOPNOTSUPP precedenceAlexandra Winter
When getting or setting VNICC parameters, the error code EOPNOTSUPP should have precedence over EBUSY. EBUSY is used because vnicc feature and bridgeport feature are mutually exclusive, which is a temporary condition. Whereas EOPNOTSUPP indicates that the HW does not support all or parts of the vnicc feature. This issue causes the vnicc sysfs params to show 'blocked by bridgeport' for HW that does not support VNICC at all. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20openvswitch: Distribute switch variables for initializationKees Cook
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. net/openvswitch/flow_netlink.c: In function ‘validate_set’: net/openvswitch/flow_netlink.c:2711:29: warning: statement will never be executed [-Wswitch-unreachable] 2711 | const struct ovs_key_ipv4 *ipv4_key; | ^~~~~~~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: ip6_gre: Distribute switch variables for initializationKees Cook
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. net/ipv6/ip6_gre.c: In function ‘ip6gre_err’: net/ipv6/ip6_gre.c:440:32: warning: statement will never be executed [-Wswitch-unreachable] 440 | struct ipv6_tlv_tnl_enc_lim *tel; | ^~~ net/ipv6/ip6_tunnel.c: In function ‘ip6_tnl_err’: net/ipv6/ip6_tunnel.c:520:32: warning: statement will never be executed [-Wswitch-unreachable] 520 | struct ipv6_tlv_tnl_enc_lim *tel; | ^~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: core: Distribute switch variables for initializationKees Cook
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. net/core/skbuff.c: In function ‘skb_checksum_setup_ip’: net/core/skbuff.c:4809:7: warning: statement will never be executed [-Wswitch-unreachable] 4809 | int err; | ^~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20ARM: dts: dra7-l4: mark timer13-16 as pwm capableGrygorii Strashko
DMTimers 13 - 16 are PWM capable and also can be used for CPTS input signals generation. Hence, mark them as "ti,timer-pwm". Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-02-20ARM: dts: dra7xx-clocks: Fixup IPU1 mux clock parent sourceSuman Anna
The IPU1 functional clock is the output of a mux clock (represented by ipu1_gfclk_mux previously) and the clock source for this has been updated to be sourced from dpll_core_h22x2_ck in commit 39879c7d963e ("ARM: dts: dra7xx-clocks: Source IPU1 functional clock from CORE DPLL"). ipu1_gfclk_mux is an obsolete clock now with the clkctrl conversion, and this clock source parenting is lost during the new clkctrl layout conversion. Remove this stale clock and fix up the clock source for this mux clock using the latest equivalent clkctrl clock. This restores the previous logic and ensures that the IPU1 continues to run at the same frequency of IPU2 and independent of the ABE DPLL. Fixes: b5f8ffbb6fad ("ARM: dts: dra7: convert to use new clkctrl layout") Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-02-20ARM: dts: am437x-idk-evm: Fix incorrect OPP node namesSuman Anna
The commit 337c6c9a69af ("ARM: dts: am437x-idk-evm: Disable OPP50 for MPU") adjusts couple of OPP nodes defined in the common am4372.dtsi file, but used outdated node names. This results in these getting treated as new OPP nodes with missing properties. Fix this properly by using the correct node names as updated in commit b9cb2ba71848 ("ARM: dts: Use - instead of @ for DT OPP entries for TI SoCs"). Reported-by: Roger Quadros <rogerq@ti.com> Fixes: 337c6c9a69af ("ARM: dts: am437x-idk-evm: Disable OPP50 for MPU") Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-02-20drm/i915/uc: consolidate firmware cleanupDaniele Ceraolo Spurio
We are quite trigger happy in cleaning up the firmware blobs, as we do so from several error/fini paths in GuC/HuC/uC code. We do have the __uc_cleanup_firmwares cleanup function, which unwinds __uc_fetch_firmwares and is already called both from the error path of gem_init and from gem_driver_release, so let's stop cleaning up from all the other paths. The fact that we're not cleaning the firmware immediately means that we can't consider firmware availability as an indication of initialization success. A "LOADABLE" status has been added to indicate that the initialization was successful, to be used to selectively load HuC only if HuC init has completed (HuC init failure is not considered a fatal error). v2: s/ready_to_load/loadable (Michal), only run guc/huc_fini if the fw is in loadable state Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> #v1 Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-9-daniele.ceraolospurio@intel.com
2020-02-20drm/i915/uc: Abort early on uc_init failureDaniele Ceraolo Spurio
Now that we can differentiate wants vs uses GuC/HuC, intel_uc_init is restricted to running only if we have successfully fetched the required blob(s) and are committed to using the microcontroller(s). The only remaining thing that can go wrong in uc_init is the allocation of GuC/HuC related objects; if we get such a failure better to bail out immediately instead of wedging later, like we do for e.g. intel_engines_init, since without objects we can't use the HW, including not being able to attempt the firmware load. While at it, remove the unneeded fw_cleanup call (this is handled outside of gt_init) and add a probe failure injection point for testing. Also, update the logs for <g/h>uc_init failures to probe_failure() since they will cause the driver load to fail. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Fernando Pacheco <fernando.pacheco@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-8-daniele.ceraolospurio@intel.com
2020-02-20drm/i915/guc: Apply new uC status tracking to GuC submission as wellDaniele Ceraolo Spurio
To be able to differentiate the before and after of our commitment to GuC submission, which will be used in follow-up patches to early set-up the submission structures. v2: move functions to guc_submission.h (Michal) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-7-daniele.ceraolospurio@intel.com
2020-02-20drm/i915/uc: Improve tracking of uC init statusDaniele Ceraolo Spurio
To be able to setup GuC submission functions during engine init we need to commit to using GuC as soon as possible. Currently, the only thing that can stop us from using the microcontrollers once we've fetched the blobs is a fundamental error (e.g. OOM); given that if we hit such an error we can't really fall-back to anything, we can "officialize" the FW fetching completion as the moment at which we're committing to using GuC. To better differentiate this case, the uses_guc check, which indicates that GuC is supported and was selected in modparam, is renamed to wants_guc and a new uses_guc is introduced to represent the case were we're committed to using the GuC. Note that uses_guc does still not imply that the blob is actually loaded on the HW (is_running is the check for that). Also, since we need to have attempted the fetch for the result of uses_guc to be meaningful, we need to make sure we've moved away from INTEL_UC_FIRMWARE_SELECTED. All the GuC changes have been mirrored on the HuC for coherency. v2: split fetch return changes and new macros to their own patches, support HuC only if GuC is wanted, improve "used" state description (Michal) v3: s/wants_huc/uses_huc in uc_init_wopcm Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Fernando Pacheco <fernando.pacheco@intel.com> #v1 Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-6-daniele.ceraolospurio@intel.com
2020-02-20drm/i915/uc: autogenerate uC checker functionsDaniele Ceraolo Spurio
We want to map uC-level checks to GuC/HuC-level ones. The mapping from the uC state to the GuC/HuC one follows the same pattern for all the functions: uc_xxx_guc() -> guc_is_yyy() So we can easily use a macro to autogenerate the functions via macros by passing in the 2 mapped states. v2: Split this change to its own patch (Michal) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-5-daniele.ceraolospurio@intel.com
2020-02-20drm/i915/uc: Update the FW status on injected fetch errorDaniele Ceraolo Spurio
In a follow up patch we will rely on the fact that the status always moves away from "SELECTED" after the fetch is attempted to decide what to do with the GuC. v2: Split this change to its own patch (Michal) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-4-daniele.ceraolospurio@intel.com
2020-02-20drm/i915/guc: Kill USES_GUC_SUBMISSION macroDaniele Ceraolo Spurio
use intel_uc_uses_guc_submission() directly instead, to be consistent in the way we check what we want to do with the GuC. v2: do not go through ctx->vm->gt, use i915->gt instead Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> #v1 Reviewed-by: Andi Shyti <andi.shyti@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-3-daniele.ceraolospurio@intel.com
2020-02-20drm/i915/guc: Kill USES_GUC macroDaniele Ceraolo Spurio
use intel_uc_uses_guc() directly instead, to be consistent in the way we check what we want to do with the GuC. v2: split guc_log_info changes to their own patch (Michal) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-2-daniele.ceraolospurio@intel.com
generated by cgit (git 2.34.1) at 2025-09-15 06:35:39 +0000