| Age | Commit message (Collapse) | Author |
|---|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
thunderbolt: Fixes for v6.12-rc7
This includes following USB4/Thunderbolt fixes for v6.12-rc7:
- Fix for retimer enumeration.
- Fix connection issue with Pluggable UD-4VPD USB4 dock.
Both have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.12-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Fix connection issue with Pluggable UD-4VPD dock
thunderbolt: Add only on-board retimers when !CONFIG_USB4_DEBUGFS_MARGINING
|
|
I noticed that recently, simple operations like "make" started
failing on NFSv3 mounts of ext4 exports. Network capture shows that
READDIRPLUS operated correctly but READDIR failed with
NFS3ERR_INVAL. The vfs_llseek() call returned EINVAL when it is
passed a non-zero starting directory cookie.
I bisected to commit c689bdd3bffa ("nfsd: further centralize
protocol version checks.").
Turns out that nfsd3_proc_readdir() does not call fh_verify() before
it calls nfsd_readdir(), so the new fhp->fh_64bit_cookies boolean is
not set properly. This leaves the NFSD_MAY_64BIT_COOKIE unset when
the directory is opened.
For ext4, this causes the wrong "max file size" value to be used
when sanity checking the incoming directory cookie (which is a seek
offset value).
The fhp->fh_64bit_cookies boolean is /always/ properly initialized
after nfsd_open() returns. There doesn't seem to be a reason for the
generic NFSD open helper to handle the f_mode fix-up for
directories, so just move that to the one caller that tries to open
an S_IFDIR with NFSD_MAY_64BIT_COOKIE.
Suggested-by: NeilBrown <neilb@suse.de>
Fixes: c689bdd3bffa ("nfsd: further centralize protocol version checks.")
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This patch checks if div is less than or equal to zero (div <= 0). If
div is zero or negative, the function returns -EINVAL, ensuring the
division operation is safe to perform.
Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com>
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20241107015936.211902-1-luoyifan@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch checks if div is less than or equal to zero (div <= 0). If
div is zero or negative, the function returns -EINVAL, ensuring the
division operation (*prate / div) is safe to perform.
Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241106014654.206860-1-luoyifan@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Another model of Thinkpad E14 Gen 6 (21M4)
needs a quirk entry for the dmic to be detected.
Signed-off-by: Markus Petri <mp@mpetri.org>
Link: https://patch.msgid.link/20241107094020.1050935-1-mp@localhost
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Andy Yan says:
====================
Fix the arc emac driver
The arc emac driver was broken for a long time,
The first broken happens when a dma releated fix introduced in Linux 5.10.
The second broken happens when a emac device tree node restyle introduced
in Linux 6.1.
These two patches are try to make the arc emac work again.
Changes in v2:
- Add cover letter.
- Add fix tag.
- Add more detail explaination.
====================
Link: https://patch.msgid.link/20241104130147.440125-1-andyshrk@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The binding emac_rockchip.txt is converted to YAML.
Changed against the original binding is an added MDIO subnode.
This make the driver failed to find the PHY, and given the 'mdio
has invalid PHY address' it is probably looking in the wrong node.
Fix emac_mdio.c so that it can handle both old and new
device trees.
Fixes: 1dabb74971b3 ("ARM: dts: rockchip: restyle emac nodes")
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Tested-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20220603163539.537-3-jbx6244@gmail.com
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ndev->dev and pdev->dev aren't the same device, use ndev->dev.parent
which has dma_mask, ndev->dev.parent is just pdev->dev.
Or it would cause the following issue:
[ 39.933526] ------------[ cut here ]------------
[ 39.938414] WARNING: CPU: 1 PID: 501 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x90/0x1f8
Fixes: f959dcd6ddfd ("dma-direct: Fix potential NULL pointer dereference")
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Copy the relevant data from userspace to the vb->planes unconditionally
as it's possible some of the fields may have changed after the buffer
has been validated.
Keep the dma_buf_put(planes[plane].dbuf) calls in the first
`if (!reacquired)` case, in order to be close to the plane validation code
where the buffers were got in the first place.
Cc: stable@vger.kernel.org
Fixes: 95af7c00f35b ("media: videobuf2-core: release all planes first in __prepare_dmabuf()")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Philo Lu says:
====================
virtio_net: Make RSS interact properly with queue number
With this patch set, RSS updates with queue_pairs changing:
- When virtnet_probe, init default rss and commit
- When queue_pairs changes _without_ user rss configuration, update rss
with the new queue number
- When queue_pairs changes _with_ user rss configuration, keep rss as user
configured
Patch 1 and 2 fix possible out of bound errors for indir_table and key.
Patch 3 and 4 add RSS update in probe() and set_queues().
====================
Link: https://patch.msgid.link/20241104085706.13872-1-lulie@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RSS configuration should be updated with queue number. In particular, it
should be updated when (1) rss enabled and (2) default rss configuration
is used without user modification.
During rss command processing, device updates queue_pairs using
rss.max_tx_vq. That is, the device updates queue_pairs together with
rss, so we can skip the sperate queue_pairs update
(VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET below) and return directly.
Also remove the `vi->has_rss ?` check when setting vi->rss.max_tx_vq,
because this is not used in the other hash_report case.
Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During virtnet_probe, default rss configuration is initialized, but was
not committed to the device. This patch fix this by sending rss command
after device ready in virtnet_probe. Otherwise, the actual rss
configuration used by device can be different with that read by user
from driver, which may confuse the user.
If the command committing fails, driver rss will be disabled.
Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add hash_key_length check in virtnet_probe() to avoid possible out of
bound errors when setting/reading the hash key.
Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When reading/writing virtio_net_ctrl_rss, we get the indirection table
size from vi->rss_indir_table_size, which is initialized in
virtnet_probe(). However, the actual size of indirection_table was set
as VIRTIO_NET_RSS_MAX_TABLE_LEN=128. This collision may cause issues if
the vi->rss_indir_table_size exceeds 128.
This patch instead uses dynamic indirection table, allocated with
vi->rss after vi->rss_indir_table_size initialized. And free it in
virtnet_remove().
In virtnet_commit_rss_command(), sgs for rss is initialized differently
with hash_report. So indirection_table is not used if !vi->has_rss, and
then we don't need to alloc indirection_table for hash_report only uses.
Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
8c873e219970 ("netfilter: core: free hooks with call_rcu") removed
synchronize_net() call when unregistering basechain hook, however,
net_device removal event handler for the NFPROTO_NETDEV was not updated
to wait for RCU grace period.
Note that 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks
on net_device removal") does not remove basechain rules on device
removal, I was hinted to remove rules on net_device removal later, see
5ebe0b0eec9d ("netfilter: nf_tables: destroy basechain and rules on
netdevice removal").
Although NETDEV_UNREGISTER event is guaranteed to be handled after
synchronize_net() call, this path needs to wait for rcu grace period via
rcu callback to release basechain hooks if netns is alive because an
ongoing netlink dump could be in progress (sockets hold a reference on
the netns).
Note that nf_tables_pre_exit_net() unregisters and releases basechain
hooks but it is possible to see NETDEV_UNREGISTER at a later stage in
the netns exit path, eg. veth peer device in another netns:
cleanup_net()
default_device_exit_batch()
unregister_netdevice_many_notify()
notifier_call_chain()
nf_tables_netdev_event()
__nft_release_basechain()
In this particular case, same rule of thumb applies: if netns is alive,
then wait for rcu grace period because netlink dump in the other netns
could be in progress. Otherwise, if the other netns is going away then
no netlink dump can be in progress and basechain hooks can be released
inmediately.
While at it, turn WARN_ON() into WARN_ON_ONCE() for the basechain
validation, which should not ever happen.
Fixes: 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks on net_device removal")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Although support for SME was merged in v5.19, we've since uncovered a
number of issues with the implementation, including issues which might
corrupt the FPSIMD/SVE/SME state of arbitrary tasks. While there are
patches to address some of these issues, ongoing review has highlighted
additional functional problems, and more time is necessary to analyse
and fix these.
For now, mark SME as BROKEN in the hope that we can fix things properly
in the near future. As SME is an OPTIONAL part of ARMv9.2+, and there is
very little extant hardware, this should not adversely affect the vast
majority of users.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org # 5.19
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20241106164220.2789279-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
SMCCCv1.3 added a hint bit which callers can set in an SMCCC function ID
(AKA "FID") to indicate that it is acceptable for the SMCCC
implementation to discard SVE and/or SME state over a specific SMCCC
call. The kernel support for using this hint is broken and SMCCC calls
may clobber the SVE and/or SME state of arbitrary tasks, though FPSIMD
state is unaffected.
The kernel support is intended to use the hint when there is no SVE or
SME state to save, and to do this it checks whether TIF_FOREIGN_FPSTATE
is set or TIF_SVE is clear in assembly code:
| ldr <flags>, [<current_task>, #TSK_TI_FLAGS]
| tbnz <flags>, #TIF_FOREIGN_FPSTATE, 1f // Any live FP state?
| tbnz <flags>, #TIF_SVE, 2f // Does that state include SVE?
|
| 1: orr <fid>, <fid>, ARM_SMCCC_1_3_SVE_HINT
| 2:
| << SMCCC call using FID >>
This is not safe as-is:
(1) SMCCC calls can be made in a preemptible context and preemption can
result in TIF_FOREIGN_FPSTATE being set or cleared at arbitrary
points in time. Thus checking for TIF_FOREIGN_FPSTATE provides no
guarantee.
(2) TIF_FOREIGN_FPSTATE only indicates that the live FP/SVE/SME state in
the CPU does not belong to the current task, and does not indicate
that clobbering this state is acceptable.
When the live CPU state is clobbered it is necessary to update
fpsimd_last_state.st to ensure that a subsequent context switch will
reload FP/SVE/SME state from memory rather than consuming the
clobbered state. This and the SMCCC call itself must happen in a
critical section with preemption disabled to avoid races.
(3) Live SVE/SME state can exist with TIF_SVE clear (e.g. with only
TIF_SME set), and checking TIF_SVE alone is insufficient.
Remove the broken support for the SMCCCv1.3 SVE saving hint. This is
effectively a revert of commits:
* cfa7ff959a78 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
* a7c3acca5380 ("arm64: smccc: Save lr before calling __arm_smccc_sve_check()")
... leaving behind the ARM_SMCCC_VERSION_1_3 and ARM_SMCCC_1_3_SVE_HINT
definitions, since these are simply definitions from the SMCCC
specification, and the latter is used in KVM via ARM_SMCCC_CALL_HINTS.
If we want to bring this back in future, we'll probably want to handle
this logic in C where we can use all the usual FPSIMD/SVE/SME helper
functions, and that'll likely require some rework of the SMCCC code
and/or its callers.
Fixes: cfa7ff959a78 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241106160448.2712997-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit a23aa0404218 ("net: stmmac: ethtool: Fixed calltrace caused by
unbalanced disable_irq_wake calls") introduced checks to prevent
unbalanced enable and disable IRQ wake calls. However it only
initialized the auxiliary variable on one of the paths,
stmmac_request_irq_multi_msi(), missing the other,
stmmac_request_irq_single().
Add the same initialization on stmmac_request_irq_single() to prevent
"Unbalanced IRQ <x> wake disable" warnings from being printed the first
time disable_irq_wake() is called on platforms that run on that code
path.
Fixes: a23aa0404218 ("net: stmmac: ethtool: Fixed calltrace caused by unbalanced disable_irq_wake calls")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241101-stmmac-unbalanced-wake-single-fix-v1-1-5952524c97f0@collabora.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The scope of the TX skb is wider than just mse102x_tx_frame_spi(),
so in case the TX skb room needs to be expanded, we should free the
the temporary skb instead of the original skb. Otherwise the original
TX skb pointer would be freed again in mse102x_tx_work(), which leads
to crashes:
Internal error: Oops: 0000000096000004 [#2] PREEMPT SMP
CPU: 0 PID: 712 Comm: kworker/0:1 Tainted: G D 6.6.23
Hardware name: chargebyte Charge SOM DC-ONE (DT)
Workqueue: events mse102x_tx_work [mse102x]
pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_release_data+0xb8/0x1d8
lr : skb_release_data+0x1ac/0x1d8
sp : ffff8000819a3cc0
x29: ffff8000819a3cc0 x28: ffff0000046daa60 x27: ffff0000057f2dc0
x26: ffff000005386c00 x25: 0000000000000002 x24: 00000000ffffffff
x23: 0000000000000000 x22: 0000000000000001 x21: ffff0000057f2e50
x20: 0000000000000006 x19: 0000000000000000 x18: ffff00003fdacfcc
x17: e69ad452d0c49def x16: 84a005feff870102 x15: 0000000000000000
x14: 000000000000024a x13: 0000000000000002 x12: 0000000000000000
x11: 0000000000000400 x10: 0000000000000930 x9 : ffff00003fd913e8
x8 : fffffc00001bc008
x7 : 0000000000000000 x6 : 0000000000000008
x5 : ffff00003fd91340 x4 : 0000000000000000 x3 : 0000000000000009
x2 : 00000000fffffffe x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
skb_release_data+0xb8/0x1d8
kfree_skb_reason+0x48/0xb0
mse102x_tx_work+0x164/0x35c [mse102x]
process_one_work+0x138/0x260
worker_thread+0x32c/0x438
kthread+0x118/0x11c
ret_from_fork+0x10/0x20
Code: aa1303e0 97fffab6 72001c1f 54000141 (f9400660)
Cc: stable@vger.kernel.org
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241105163101.33216-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dealloc flag may be cleared and the extent won't reach the disk in
cow_file_range when errors path. The reserved qgroup space is freed in
commit 30479f31d44d ("btrfs: fix qgroup reserve leaks in
cow_file_range"). However, the length of untouched region to free needs
to be adjusted with the correct remaining region size.
Fixes: 30479f31d44d ("btrfs: fix qgroup reserve leaks in cow_file_range")
CC: stable@vger.kernel.org # 6.11+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Haisu Wang <haisuwang@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At insert_delayed_ref() if we need to update the action of an existing
ref to BTRFS_DROP_DELAYED_REF, we delete the ref from its ref head's
ref_add_list using list_del(), which leaves the ref's add_list member
not reinitialized, as list_del() sets the next and prev members of the
list to LIST_POISON1 and LIST_POISON2, respectively.
If later we end up calling drop_delayed_ref() against the ref, which can
happen during merging or when destroying delayed refs due to a transaction
abort, we can trigger a crash since at drop_delayed_ref() we call
list_empty() against the ref's add_list, which returns false since
the list was not reinitialized after the list_del() and as a consequence
we call list_del() again at drop_delayed_ref(). This results in an
invalid list access since the next and prev members are set to poison
pointers, resulting in a splat if CONFIG_LIST_HARDENED and
CONFIG_DEBUG_LIST are set or invalid poison pointer dereferences
otherwise.
So fix this by deleting from the list with list_del_init() instead.
Fixes: 1d57ee941692 ("btrfs: improve delayed refs iterations")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
With util-linux 2.40.2, the 'mount' utility is already utilizing the new
mount API. e.g:
# strace mount -o subvol=subv1,ro /dev/test/scratch1 /mnt/test/
...
fsconfig(3, FSCONFIG_SET_STRING, "source", "/dev/mapper/test-scratch1", 0) = 0
fsconfig(3, FSCONFIG_SET_STRING, "subvol", "subv1", 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "ro", NULL, 0) = 0
fsconfig(3, FSCONFIG_CMD_CREATE, NULL, NULL, 0) = 0
fsmount(3, FSMOUNT_CLOEXEC, 0) = 4
mount_setattr(4, "", AT_EMPTY_PATH, {attr_set=MOUNT_ATTR_RDONLY, attr_clr=0, propagation=0 /* MS_??? */, userns_fd=0}, 32) = 0
move_mount(4, "", AT_FDCWD, "/mnt/test", MOVE_MOUNT_F_EMPTY_PATH) = 0
But this leads to a new problem, that per-subvolume RO/RW mount no
longer works, if the initial mount is RO:
# mount -o subvol=subv1,ro /dev/test/scratch1 /mnt/test
# mount -o rw,subvol=subv2 /dev/test/scratch1 /mnt/scratch
# mount | grep mnt
/dev/mapper/test-scratch1 on /mnt/test type btrfs (ro,relatime,discard=async,space_cache=v2,subvolid=256,subvol=/subv1)
/dev/mapper/test-scratch1 on /mnt/scratch type btrfs (ro,relatime,discard=async,space_cache=v2,subvolid=257,subvol=/subv2)
# touch /mnt/scratch/foobar
touch: cannot touch '/mnt/scratch/foobar': Read-only file system
This is a common use cases on distros.
[CAUSE]
We have a workaround for remount to handle the RO->RW change, but if the
mount is using the new mount API, we do not do that, and rely on the
mount tool NOT to set the ro flag.
But that's not how the mount tool is doing for the new API:
fsconfig(3, FSCONFIG_SET_STRING, "source", "/dev/mapper/test-scratch1", 0) = 0
fsconfig(3, FSCONFIG_SET_STRING, "subvol", "subv1", 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "ro", NULL, 0) = 0 <<<< Setting RO flag for super block
fsconfig(3, FSCONFIG_CMD_CREATE, NULL, NULL, 0) = 0
fsmount(3, FSMOUNT_CLOEXEC, 0) = 4
mount_setattr(4, "", AT_EMPTY_PATH, {attr_set=MOUNT_ATTR_RDONLY, attr_clr=0, propagation=0 /* MS_??? */, userns_fd=0}, 32) = 0
move_mount(4, "", AT_FDCWD, "/mnt/test", MOVE_MOUNT_F_EMPTY_PATH) = 0
This means we will set the super block RO at the first mount.
Later RW mount will not try to reconfigure the fs to RW because the
mount tool is already using the new API.
This totally breaks the per-subvolume RO/RW mount behavior.
[FIX]
Do not skip the reconfiguration even if using the new API. The old
comments are just expecting any mount tool to properly skip the RO flag
set even if we specify "ro", which is not the reality.
Update the comments regarding the backward compatibility on the kernel
level so it works with old and new mount utilities.
CC: stable@vger.kernel.org # 6.8+
Fixes: f044b318675f ("btrfs: handle the ro->rw transition for mounting different subvolumes")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Christoffer reports that on some implementations, writing to
GICR_ISACTIVER0 (and similar GICD registers) can race badly with a guest
issuing a deactivation of that interrupt via the system register interface.
There are multiple reasons to this:
- this uses an early write-acknoledgement memory type (nGnRE), meaning
that the write may only have made it as far as some interconnect
by the time the store is considered "done"
- the GIC itself is allowed to buffer the write until it decides to
take it into account (as long as it is in finite time)
The effects are that the activation may not have taken effect by the time
the kernel enters the guest, forcing an immediate exit, or that a guest
deactivation occurs before the interrupt is active, doing nothing.
In order to guarantee that the write to the ISACTIVER register has taken
effect, read back from it, forcing the interconnect to propagate the write,
and the GIC to process the write before returning the read.
Reported-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241106084418.3794612-1-maz@kernel.org
|
|
Pull NFS client fixes from Anna Schumaker:
"These are mostly fixes that came up during the nfs bakeathon the other
week.
Stable Fixes:
- Fix KMSAN warning in decode_getfattr_attrs()
Other Bugfixes:
- Handle -ENOTCONN in xs_tcp_setup_socked()
- NFSv3: only use NFS timeout for MOUNT when protocols are compatible
- Fix attribute delegation behavior on exclusive create and a/mtime
changes
- Fix localio to cope with racing nfs_local_probe()
- Avoid i_lock contention in fs_clear_invalid_mapping()"
* tag 'nfs-for-6.12-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs: avoid i_lock contention in nfs_clear_invalid_mapping
nfs_common: fix localio to cope with racing nfs_local_probe()
NFS: Further fixes to attribute delegation a/mtime changes
NFS: Fix attribute delegation behaviour on exclusive create
nfs: Fix KMSAN warning in decode_getfattr_attrs()
NFSv3: only use NFS timeout for MOUNT when protocols are compatible
sunrpc: handle -ENOTCONN in xs_tcp_setup_socket()
|
|
When CONFIG_DVB_DYNAMIC_MINORS, ret is not initialized, and a
semaphore is left at the wrong state, in case of errors.
Make the code simpler and avoid mistakes by having just one error
check logic used weather DVB_DYNAMIC_MINORS is used or not.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202410201717.ULWWdJv8-lkp@intel.com/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9e067488d8935b8cf00959764a1fa5de85d65725.1730926254.git.mchehab+huawei@kernel.org
|
|
DMA ch status register offset change in acp7.0 platform
Incorrect DMA channel status register offset check lead to
firmware boot failure.
[ 14.432497] snd_sof_amd_acp70 0000:c4:00.5: ------------[ DSP dump start ]------------
[ 14.432533] snd_sof_amd_acp70 0000:c4:00.5: Firmware boot failure due to timeout
[ 14.432549] snd_sof_amd_acp70 0000:c4:00.5: fw_state: SOF_FW_BOOT_IN_PROGRESS (3)
[ 14.432610] snd_sof_amd_acp70 0000:c4:00.5: invalid header size 0x71c41000. FW oops is bogus
[ 14.432626] snd_sof_amd_acp70 0000:c4:00.5: unexpected fault 0x71c40000 trace 0x71c40000
[ 14.432642] snd_sof_amd_acp70 0000:c4:00.5: ------------[ DSP dump end ]------------
[ 14.432657] snd_sof_amd_acp70 0000:c4:00.5: error: failed to boot DSP firmware -5
[ 14.432672] snd_sof_amd_acp70 0000:c4:00.5: fw_state change: 3 -> 4
[ 14.433260] dmic-codec dmic-codec: ASoC: Unregistered DAI 'dmic-hifi'
[ 14.433319] snd_sof_amd_acp70 0000:c4:00.5: fw_state change: 4 -> 0
[ 14.433358] snd_sof_amd_acp70 0000:c4:00.5: error: sof_probe_work failed err: -5
Update correct register offset for DMA ch status register.
Fixes: 490be7ba2a01 ("ASoC: SOF: amd: add support for acp7.0 based platform")
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20241106142658.1240929-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
arch_init_invariance_cppc() is called at the end of
acpi_cppc_processor_probe() in order to configure frequency invariance
based upon the values from _CPC.
This however doesn't work on AMD CPPC shared memory designs that have
AMD preferred cores enabled because _CPC needs to be analyzed from all
cores to judge if preferred cores are enabled.
This issue manifests to users as a warning since commit 21fb59ab4b97
("ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn"):
```
Could not retrieve highest performance (-19)
```
However the warning isn't the cause of this, it was actually
commit 279f838a61f9 ("x86/amd: Detect preferred cores in
amd_get_boost_ratio_numerator()") which exposed the issue.
To fix this problem, change arch_init_invariance_cppc() into a new weak
symbol that is called at the end of acpi_processor_driver_init().
Each architecture that supports it can declare the symbol to override
the weak one.
Define it for x86, in arch/x86/kernel/acpi/cppc.c, and for all of the
architectures using the generic arch_topology.c code.
Fixes: 279f838a61f9 ("x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()")
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219431
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20241104222855.3959267-1-superm1@kernel.org
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys fixes from Jarkko Sakkinen:
"A couple of fixes for keys and trusted keys"
* tag 'keys-next-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation
security/keys: fix slab-out-of-bounds in key_task_permission
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracefs fixes from Steven Rostedt:
"Fix tracefs mount options.
Commit 78ff64081949 ("vfs: Convert tracefs to use the new mount API")
broke the gid setting when set by fstab or other mount utility. It is
ignored when it is set. Fix the code so that it recognises the option
again and will honor the settings on mount at boot up.
Update the internal documentation and create a selftest to make sure
it doesn't break again in the future"
* tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/selftests: Add tracefs mount options test
tracing: Document tracefs gid mount option
tracing: Fix tracefs mount options
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- AMD PMF: Add new hardware id
- AMD PMC: Fix crash when loaded with enable_stb=1 on devices without STB
- Dell: Add Alienware hwid for Alienware systems with Dell WMI interface
- thinkpad_acpi: Quirk to fix wrong fan speed readings on L480
- New hotkey mappings for Dell and Lenovo laptops
* tag 'platform-drivers-x86-v6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix for ThinkPad's with ECFW showing incorrect fan speed
platform/x86: ideapad-laptop: add missing Ideapad Pro 5 fn keys
platform/x86: dell-wmi-base: Handle META key Lock/Unlock events
platform/x86: dell-smbios-base: Extends support to Alienware products
platform/x86/amd/pmc: Detect when STB is not available
platform/x86/amd/pmf: Add SMU metrics table support for 1Ah family 60h model
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- fix memory safety bugs in dm-cache
- fix restart/panic logic in dm-verity
- fix 32-bit unsigned integer overflow in dm-unstriped
- fix a device mapper crash if blk_alloc_disk fails
* tag 'for-6.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: fix potential out-of-bounds access on the first resume
dm cache: optimize dirty bit checking with find_next_bit when resizing
dm cache: fix out-of-bounds access to the dirty bitset when resizing
dm cache: fix flushing uninitialized delayed_work on cache_ctr error
dm cache: correct the number of origin blocks to match the target length
dm-verity: don't crash if panic_on_corruption is not selected
dm-unstriped: cast an operand to sector_t to prevent potential uint32_t overflow
dm: fix a crash if blk_alloc_disk fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fix from Jiri Kosina:
- report buffer sanitization fix for HID core (Jiri Kosina)
* tag 'hid-for-linus-20241105' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: core: zero-initialize the report buffer
|
|
Xiaomi Book Pro 14 2022 (MIA2210-AD) requires a quirk entry for its
internal microphone to be enabled.
This is likely due to similar reasons as seen previously on Redmi Book
14/15 Pro 2022 models (since they likely came with similar firmware):
- commit dcff8b7ca92d ("ASoC: amd: yc: Add Xiaomi Redmi Book Pro 15 2022
into DMI table")
- commit c1dd6bf61997 ("ASoC: amd: yc: Add Xiaomi Redmi Book Pro 14 2022
into DMI table")
A quirk would likely be needed for Xiaomi Book Pro 15 2022 models, too.
However, I do not have such device on hand so I will leave it for now.
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://patch.msgid.link/20241106024052.15748-1-jeffbai@aosc.io
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for Sierra Wireless EM86xx with USB-id 0x1199:0x90e5 and
0x1199:0x90e4.
0x1199:0x90e5
T: Bus=03 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 14 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1199 ProdID=90e5 Rev= 5.15
S: Manufacturer=Sierra Wireless, Incorporated
S: Product=Semtech EM8695 Mobile Broadband Adapter
S: SerialNumber=004403161882339
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#=12 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=qcserial
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=qcserial
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I:* If#=12 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#=13 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#=13 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x1199:0x90e4
T: Bus=03 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1199 ProdID=90e4 Rev= 0.00
S: Manufacturer=Sierra Wireless, Incorporated
S: SerialNumber=004403161882339
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Jack Wu <wojackbb@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The logic for handling SVE traps manipulates saved FPSIMD/SVE state
incorrectly, and a race with preemption can result in a task having
TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SVE traps enabled). This has been observed to result
in warnings from do_sve_acc() where SVE traps are not expected while
TIF_SVE is set:
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
Warnings of this form have been reported intermittently, e.g.
https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/
https://lore.kernel.org/linux-arm-kernel/000000000000511e9a060ce5a45c@google.com/
The race can occur when the SVE trap handler is preempted before and
after manipulating the saved FPSIMD/SVE state, starting and ending on
the same CPU, e.g.
| void do_sve_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
|
| sve_init_regs() {
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| ...
| } else {
| fpsimd_to_sve(current);
| current->thread.fp_type = FP_STATE_SVE;
| }
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SVE traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace.
Fixes: cccb78ce89c4 ("arm64/sve: Rework SVE access trap to convert state in registers")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241030-arm64-fpsimd-foreign-flush-v1-1-bd7bd66905a2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
fan speed
Fix for Thinkpad's with ECFW showing incorrect fan speed. Some models use
decimal instead of hexadecimal for the speed stored in the EC registers.
For example the rpm register will have 0x4200 instead of 0x1068, here
the actual RPM is "4200" in decimal.
Add a quirk to handle this.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20241105235505.8493-1-vishnuocv@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
spurious interrupts
Running a L2 vCPU (see [1] for terminology) with LPCR_MER bit set and no
pending interrupts results in that L2 vCPU getting an infinite flood of
spurious interrupts. The 'if check' in kvmhv_run_single_vcpu() sets the
LPCR_MER bit if there are pending interrupts.
The spurious flood problem can be observed in 2 cases:
1. Crashing the guest while interrupt heavy workload is running
a. Start a L2 guest and run an interrupt heavy workload (eg: ipistorm)
b. While the workload is running, crash the guest (make sure kdump
is configured)
c. Any one of the vCPUs of the guest will start getting an infinite
flood of spurious interrupts.
2. Running LTP stress tests in multiple guests at the same time
a. Start 4 L2 guests.
b. Start running LTP stress tests on all 4 guests at same time.
c. In some time, any one/more of the vCPUs of any of the guests will
start getting an infinite flood of spurious interrupts.
The root cause of both the above issues is the same:
1. A NMI is sent to a running vCPU that has LPCR_MER bit set.
2. In the NMI path, all registers are refreshed, i.e, H_GUEST_GET_STATE
is called for all the registers.
3. When H_GUEST_GET_STATE is called for LPCR, the vcpu->arch.vcore->lpcr
of that vCPU at L1 level gets updated with LPCR_MER set to 1, and this
new value is always used whenever that vCPU runs, regardless of whether
there was a pending interrupt.
4. Since LPCR_MER is set, the vCPU in L2 always jumps to the external
interrupt handler, and this cycle never ends.
Fix the spurious flood by masking off the LPCR_MER bit before running a
L2 vCPU to ensure that it is not set if there are no pending interrupts.
[1] Terminology:
1. L0 : PAPR hypervisor running in HV mode
2. L1 : Linux guest (logical partition) running on top of L0
3. L2 : KVM guest running on top of L1
Fixes: ec0f6639fa88 ("KVM: PPC: Book3S HV nestedv2: Ensure LPCR_MER bit is passed to the L0")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-11-04 (ice, idpf, i40e, e1000e)
For ice:
Marcin adjusts ordering of calls in ice_eswitch_detach() to resolve a
use after free issue.
Mateusz corrects variable type for Flow Director queue to fix issues
related to drop actions.
For idpf:
Pavan resolves issues related to reset on idpf; avoiding use of freed
vport and correctly unrolling the mailbox task.
For i40e:
Aleksandr fixes a race condition involving addition and deletion of VF
MAC filters.
For e1000e:
Vitaly reverts workaround for Meteor Lake causing regressions in power
management flows.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: Remove Meteor Lake SMBUS workarounds
i40e: fix race condition by adding filter's intermediate sync state
idpf: fix idpf_vc_core_init error path
idpf: avoid vport access in idpf_get_link_ksettings
ice: change q_index variable type to s16 to store -1 value
ice: Fix use after free during unload with ports in bridge
====================
Link: https://patch.msgid.link/20241104223639.2801097-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: pm: fix wrong perm and sock kfree
Two small fixes related to the MPTCP path-manager:
- Patch 1: remove an accidental restriction to admin users to list MPTCP
endpoints. A regression from v6.7.
- Patch 2: correctly use sock_kfree_s() instead of kfree() in the
userspace PM. A fix for another fix introduced in v6.4 and
backportable up to v5.19.
====================
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-0-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The local address entries on userspace_pm_local_addr_list are allocated
by sock_kmalloc().
It's then required to use sock_kfree_s() instead of kfree() to free
these entries in order to adjust the allocated size on the sk side.
Fixes: 24430f8bf516 ("mptcp: add address into userspace pm list")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-2-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During the switch to YNL, the command to list all endpoints has been
accidentally restricted to users with admin permissions.
It looks like there are no reasons to have this restriction which makes
it harder for a user to quickly check if the endpoint list has been
correctly populated by an automated tool. Best to go back to the
previous behaviour then.
mptcp_pm_gen.c has been modified using ynl-gen-c.py:
$ ./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp_pm.yaml --source \
-o net/mptcp/mptcp_pm_gen.c
The header file doesn't need to be regenerated.
Fixes: 1d0507f46843 ("net: mptcp: convert netlink from small_ops to ops")
Cc: stable@vger.kernel.org
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-1-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DP83848 datasheet (section 4.7.2) indicates that the reset pin should be
toggled after the clocks are running. Add the PHY_RST_AFTER_CLK_EN to
make sure that this indication is respected.
In my experience not having this flag enabled would lead to, on some
boots, the wrong MII mode being selected if the PHY was initialized on
the bootloader and was receiving data during Linux boot.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 34e45ad9378c ("net: phy: dp83848: Add TI DP83848 Ethernet PHY")
Link: https://patch.msgid.link/20241102151504.811306-1-paissilva@ld-100007.ds1.internal
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mmap_region() function is somewhat terrifying, with spaghetti-like
control flow and numerous means by which issues can arise and incomplete
state, memory leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
Taking advantage of previous patches in this series we move a number of
checks earlier in the code, simplifying things by moving the core of the
logic into a static internal function __mmap_region().
Doing this allows us to perform a number of checks up front before we do
any real work, and allows us to unwind the writable unmap check
unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE
validation unconditionally also.
We move a number of things here:
1. We preallocate memory for the iterator before we call the file-backed
memory hook, allowing us to exit early and avoid having to perform
complicated and error-prone close/free logic. We carefully free
iterator state on both success and error paths.
2. The enclosing mmap_region() function handles the mapping_map_writable()
logic early. Previously the logic had the mapping_map_writable() at the
point of mapping a newly allocated file-backed VMA, and a matching
mapping_unmap_writable() on success and error paths.
We now do this unconditionally if this is a file-backed, shared writable
mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however
doing so does not invalidate the seal check we just performed, and we in
any case always decrement the counter in the wrapper.
We perform a debug assert to ensure a driver does not attempt to do the
opposite.
3. We also move arch_validate_flags() up into the mmap_region()
function. This is only relevant on arm64 and sparc64, and the check is
only meaningful for SPARC with ADI enabled. We explicitly add a warning
for this arch if a driver invalidates this check, though the code ought
eventually to be fixed to eliminate the need for this.
With all of these measures in place, we no longer need to explicitly close
the VMA on error paths, as we place all checks which might fail prior to a
call to any driver mmap hook.
This eliminates an entire class of errors, makes the code easier to reason
about and more robust.
Link: https://lkml.kernel.org/r/6e0becb36d2f5472053ac5d544c0edfe9b899e25.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently MTE is permitted in two circumstances (desiring to use MTE
having been specified by the VM_MTE flag) - where MAP_ANONYMOUS is
specified, as checked by arch_calc_vm_flag_bits() and actualised by
setting the VM_MTE_ALLOWED flag, or if the file backing the mapping is
shmem, in which case we set VM_MTE_ALLOWED in shmem_mmap() when the mmap
hook is activated in mmap_region().
The function that checks that, if VM_MTE is set, VM_MTE_ALLOWED is also
set is the arm64 implementation of arch_validate_flags().
Unfortunately, we intend to refactor mmap_region() to perform this check
earlier, meaning that in the case of a shmem backing we will not have
invoked shmem_mmap() yet, causing the mapping to fail spuriously.
It is inappropriate to set this architecture-specific flag in general mm
code anyway, so a sensible resolution of this issue is to instead move the
check somewhere else.
We resolve this by setting VM_MTE_ALLOWED much earlier in do_mmap(), via
the arch_calc_vm_flag_bits() call.
This is an appropriate place to do this as we already check for the
MAP_ANONYMOUS case here, and the shmem file case is simply a variant of
the same idea - we permit RAM-backed memory.
This requires a modification to the arch_calc_vm_flag_bits() signature to
pass in a pointer to the struct file associated with the mapping, however
this is not too egregious as this is only used by two architectures anyway
- arm64 and parisc.
So this patch performs this adjustment and removes the unnecessary
assignment of VM_MTE_ALLOWED in shmem_mmap().
[akpm@linux-foundation.org: fix whitespace, per Catalin]
Link: https://lkml.kernel.org/r/ec251b20ba1964fb64cf1607d2ad80c47f3873df.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Refactor the map_deny_write_exec() to not unnecessarily require a VMA
parameter but rather to accept VMA flags parameters, which allows us to
use this function early in mmap_region() in a subsequent commit.
While we're here, we refactor the function to be more readable and add
some additional documentation.
Link: https://lkml.kernel.org/r/6be8bb59cd7c68006ebb006eb9d8dc27104b1f70.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Incorrect invocation of VMA callbacks when the VMA is no longer in a
consistent state is bug prone and risky to perform.
With regards to the important vm_ops->close() callback We have gone to
great lengths to try to track whether or not we ought to close VMAs.
Rather than doing so and risking making a mistake somewhere, instead
unconditionally close and reset vma->vm_ops to an empty dummy operations
set with a NULL .close operator.
We introduce a new function to do so - vma_close() - and simplify existing
vms logic which tracked whether we needed to close or not.
This simplifies the logic, avoids incorrect double-calling of the .close()
callback and allows us to update error paths to simply call vma_close()
unconditionally - making VMA closure idempotent.
Link: https://lkml.kernel.org/r/28e89dda96f68c505cb6f8e9fc9b57c3e9f74b42.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "fix error handling in mmap_region() and refactor
(hotfixes)", v4.
mmap_region() is somewhat terrifying, with spaghetti-like control flow and
numerous means by which issues can arise and incomplete state, memory
leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
This series goes to great lengths to simplify how mmap_region() works and
to avoid unwinding errors late on in the process of setting up the VMA for
the new mapping, and equally avoids such operations occurring while the
VMA is in an inconsistent state.
The patches in this series comprise the minimal changes required to
resolve existing issues in mmap_region() error handling, in order that
they can be hotfixed and backported. There is additionally a follow up
series which goes further, separated out from the v1 series and sent and
updated separately.
This patch (of 5):
After an attempted mmap() fails, we are no longer in a situation where we
can safely interact with VMA hooks. This is currently not enforced,
meaning that we need complicated handling to ensure we do not incorrectly
call these hooks.
We can avoid the whole issue by treating the VMA as suspect the moment
that the file->f_ops->mmap() function reports an error by replacing
whatever VMA operations were installed with a dummy empty set of VMA
operations.
We do so through a new helper function internal to mm - mmap_file() -
which is both more logically named than the existing call_mmap() function
and correctly isolates handling of the vm_op reassignment to mm.
All the existing invocations of call_mmap() outside of mm are ultimately
nested within the call_mmap() from mm, which we now replace.
It is therefore safe to leave call_mmap() in place as a convenience
function (and to avoid churn). The invokers are:
ovl_file_operations -> mmap -> ovl_mmap() -> backing_file_mmap()
coda_file_operations -> mmap -> coda_file_mmap()
shm_file_operations -> shm_mmap()
shm_file_operations_huge -> shm_mmap()
dma_buf_fops -> dma_buf_mmap_internal -> i915_dmabuf_ops
-> i915_gem_dmabuf_mmap()
None of these callers interact with vm_ops or mappings in a problematic
way on error, quickly exiting out.
Link: https://lkml.kernel.org/r/cover.1730224667.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/d41fd763496fd0048a962f3fd9407dc72dd4fd86.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Recent changes are putting more pressure on THP deferred split queues:
under load revealing long-standing races, causing list_del corruptions,
"Bad page state"s and worse (I keep BUGs in both of those, so usually
don't get to see how badly they end up without). The relevant recent
changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin,
improved swap allocation, and underused THP splitting.
Before fixing locking: rename misleading folio_undo_large_rmappable(),
which does not undo large_rmappable, to folio_unqueue_deferred_split(),
which is what it does. But that and its out-of-line __callee are mm
internals of very limited usability: add comment and WARN_ON_ONCEs to
check usage; and return a bool to say if a deferred split was unqueued,
which can then be used in WARN_ON_ONCEs around safety checks (sparing
callers the arcane conditionals in __folio_unqueue_deferred_split()).
Just omit the folio_unqueue_deferred_split() from free_unref_folios(), all
of whose callers now call it beforehand (and if any forget then bad_page()
will tell) - except for its caller put_pages_list(), which itself no
longer has any callers (and will be deleted separately).
Swapout: mem_cgroup_swapout() has been resetting folio->memcg_data 0
without checking and unqueueing a THP folio from deferred split list;
which is unfortunate, since the split_queue_lock depends on the memcg
(when memcg is enabled); so swapout has been unqueueing such THPs later,
when freeing the folio, using the pgdat's lock instead: potentially
corrupting the memcg's list. __remove_mapping() has frozen refcount to 0
here, so no problem with calling folio_unqueue_deferred_split() before
resetting memcg_data.
That goes back to 5.4 commit 87eaceb3faa5 ("mm: thp: make deferred split
shrinker memcg aware"): which included a check on swapcache before adding
to deferred queue, but no check on deferred queue before adding THP to
swapcache. That worked fine with the usual sequence of events in reclaim
(though there were a couple of rare ways in which a THP on deferred queue
could have been swapped out), but 6.12 commit dafff3f4c850 ("mm: split
underused THPs") avoids splitting underused THPs in reclaim, which makes
swapcache THPs on deferred queue commonplace.
Keep the check on swapcache before adding to deferred queue? Yes: it is
no longer essential, but preserves the existing behaviour, and is likely
to be a worthwhile optimization (vmstat showed much more traffic on the
queue under swapping load if the check was removed); update its comment.
Memcg-v1 move (deprecated): mem_cgroup_move_account() has been changing
folio->memcg_data without checking and unqueueing a THP folio from the
deferred list, sometimes corrupting "from" memcg's list, like swapout.
Refcount is non-zero here, so folio_unqueue_deferred_split() can only be
used in a WARN_ON_ONCE to validate the fix, which must be done earlier:
mem_cgroup_move_charge_pte_range() first try to split the THP (splitting
of course unqueues), or skip it if that fails. Not ideal, but moving
charge has been requested, and khugepaged should repair the THP later:
nobody wants new custom unqueueing code just for this deprecated case.
The 87eaceb3faa5 commit did have the code to move from one deferred list
to another (but was not conscious of its unsafety while refcount non-0);
but that was removed by 5.6 commit fac0516b5534 ("mm: thp: don't need care
deferred split queue in memcg charge move path"), which argued that the
existence of a PMD mapping guarantees that the THP cannot be on a deferred
list. As above, false in rare cases, and now commonly false.
Backport to 6.11 should be straightforward. Earlier backports must take
care that other _deferred_list fixes and dependencies are included. There
is not a strong case for backports, but they can fix cornercases.
Link: https://lkml.kernel.org/r/8dc111ae-f6db-2da7-b25c-7a20b1effe3b@google.com
Fixes: 87eaceb3faa5 ("mm: thp: make deferred split shrinker memcg aware")
Fixes: dafff3f4c850 ("mm: split underused THPs")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Recent changes are putting more pressure on THP deferred split queues:
under load revealing long-standing races, causing list_del corruptions,
"Bad page state"s and worse (I keep BUGs in both of those, so usually
don't get to see how badly they end up without). The relevant recent
changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin,
improved swap allocation, and underused THP splitting.
The new unlocked list_del_init() in deferred_split_scan() is buggy. I
gave bad advice, it looks plausible since that's a local on-stack list,
but the fact is that it can race with a third party freeing or migrating
the preceding folio (properly unqueueing it with refcount 0 while holding
split_queue_lock), thereby corrupting the list linkage.
The obvious answer would be to take split_queue_lock there: but it has a
long history of contention, so I'm reluctant to add to that. Instead,
make sure that there is always one safe (raised refcount) folio before, by
delaying its folio_put(). (And of course I was wrong to suggest updating
split_queue_len without the lock: leave that until the splice.)
And remove two over-eager partially_mapped checks, restoring those tests
to how they were before: if uncharge_folio() or free_tail_page_prepare()
finds _deferred_list non-empty, it's in trouble whether or not that folio
is partially_mapped (and the flag was already cleared in the latter case).
Link: https://lkml.kernel.org/r/81e34a8b-113a-0701-740e-2135c97eb1d7@google.com
Fixes: dafff3f4c850 ("mm: split underused THPs")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The exec queue timestamp is only really useful when it's being queried
through the fdinfo. There's no need to update it so often, on every
job_free. Tracing a simple app like vkcube running shows an update
rate of ~ 120Hz. In case of discrete, the BO is on vram, creating a lot
of pcie transactions.
The update on job_free() is used to cover a gap: if exec
queue is created and destroyed rapidly, before a new query, the
timestamp still needs to be accumulated and accounted for in the xef.
Initial implementation in commit 6109f24f87d7 ("drm/xe: Add helper to
accumulate exec queue runtime") couldn't do it on the exec_queue_fini
since the xef could be gone at that point. However since commit
ce8c161cbad4 ("drm/xe: Add ref counting for xe_file") the xef is
refcounted and the exec queue always holds a reference, making this safe
now.
Improve the fix in commit 2149ded63079 ("drm/xe: Fix use after free when
client stats are captured") by reducing the frequency in which the
update is needed.
Fixes: 2149ded63079 ("drm/xe: Fix use after free when client stats are captured")
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104143815.2112272-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 83db047d9425d9a649f01573797558eff0f632e1)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
