| Age | Commit message (Collapse) | Author |
|---|
|
Fix the following sparse warning:
arch/x86/kernel/cpu/sgx/virt.c:95:35: warning:
symbol 'sgx_vepc_vm_ops' was not declared. Should it be static?
This symbol is not used outside of virt.c so mark it static.
[ bp: Massage commit message. ]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210412160023.193850-1-weiyongjun1@huawei.com
|
|
We have already an API to match a string in the array of strings.
Utilize it instead of open coded analogues.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A pre-release silicon erratum workaround where wq reset does not clear
WQCFG registers was leaked into upstream code. Use wq reset command
instead of blasting the MMIO region. This also address an issue where
we clobber registers in future devices.
Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling")
Reported-by: Shreenivaas Devarajan <shreenivaas.devarajan@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161824330020.881560.16375921906426627033.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add disabling/clearing of MSIX permission entries on device shutdown to
mirror the enabling of the MSIX entries on probe. Current code left the
MSIX enabled and the pasid entries still programmed at device shutdown.
Fixes: 8e50d392652f ("dmaengine: idxd: Add shared workqueue support")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161824457969.882533.6020239898682672311.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the missing unlock before return from function zynqmp_qspi_exec_op()
in the error handling case.
Fixes: a0f65be6e880 ("spi: spi-zynqmp-gqspi: add mutex locking for exec_op")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210412160025.194171-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We use ACPI_PTR() and related ifendif protection for the id table.
This is unnecessary as the struct acpi_device_id is defined in
mod_devicetable.h and doesn't rely on ACPI. The driver doesn't
use any ACPI apis, so it can be compiled in the ACPI=n case
with no warnings.
So remove the ACPI_PTR and related ifendif protection, also
replace the header acpi.h with mod_devicetable.h.
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/1618228708-37949-3-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We mask the irq when the command completion is timeout. This won't
stop the already running irq handler. Use sychronize_irq() after
we mask the irq, to make sure there is no running handler.
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/1618228708-37949-2-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
"Some m68k platforms with a non-zero memory base fail to boot with the
recent flatmem changes.
This is a single regression fix to the pfn offset for that case"
* tag 'm68knommu-for-v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: fix flatmem memory model setup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next
Peter writes:
Several Cadence3 improvements are introduced in v5.13-rc1:
- Add recovery during resume if the controller was lost power at system suspend
- Reduce DMA memory footprint
- Other small improvements
* tag 'usb-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
usb: cdnsp: Fixes issue with Configure Endpoint command
usb: cdnsp: remove redundant initialization of variable ret
usb: cdns3: delete repeated clear operations
usb: cdns3: Optimize DMA request buffer allocation
usb: cdns3: Use dma_pool_* api to alloc trb pool
usb: cdns3: fix static checker warning.
usb: cdns3: imx: mark cdns_imx_system_resume as __maybe_unused
usb: cdns3: trace: delete the trace parameter for request->trb
usb: cdns3: imx: add power lost support for system resume
usb: cdns3: add power lost support for system resume
|
|
Fix the etm node hex address to lower case for matching regexp
specification and removing the additional warning that looks like:
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dt.yaml: /: 'etm@73C000' does not
match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$',
'pinctrl-[0-9]+'
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The FS_IOC_[GS]ETFLAGS/FS_IOC_FS[GS]ETXATTR ioctls are now handled via the
fileattr api. The only unconverted filesystem remaining is CIFS and it is
not allowed to be overlayed due to case insensitive filenames.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Since fuse just passes ioctl args through to/from server, converting to the
fileattr API is more involved, than most other filesystems.
Both .fileattr_set() and .fileattr_get() need to obtain an open file to
operate on. The simplest way is with the following sequence:
FUSE_OPEN
FUSE_IOCTL
FUSE_RELEASE
If this turns out to be a performance problem, it could be optimized for
the case when there's already a file (any file) open for the inode.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Clean out 'struct file' from internal helpers.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Release helpers used signed int.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Next patch will expand ioctl code and fuse/file.c is large enough as it is.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Remove vfs_ioc_setflags_prepare(), vfs_ioc_fssetxattr_check() and
simple_fill_fsxattr(), which are no longer used.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Richard Weinberger <richard@nod.at>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Jan Kara <jack@suse.cz>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Joel Becker <jlbec@evilplan.org>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Mike Marshall <hubcap@omnibond.com>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Jan Kara <jack@suse.cz>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: David Sterba <dsterba@suse.com>
|
|
Add stacking for the fileattr operations.
Add hack for calling security_file_ioctl() for now. Probably better to
have a pair of specific hooks for these operations.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Add stacking for the fileattr operations.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Tyler Hicks <code@tyhicks.com>
|
|
There's a substantial amount of boilerplate in filesystems handling
FS_IOC_[GS]ETFLAGS/ FS_IOC_FS[GS]ETXATTR ioctls.
Also due to userspace buffers being involved in the ioctl API this is
difficult to stack, as shown by overlayfs issues related to these ioctls.
Introduce a new internal API named "fileattr" (fsxattr can be confused with
xattr, xflags is inappropriate, since this is more than just flags).
There's significant overlap between flags and xflags and this API handles
the conversions automatically, so filesystems may choose which one to use.
In ->fileattr_get() a hint is provided to the filesystem whether flags or
xattr are being requested by userspace, but in this series this hint is
ignored by all filesystems, since generating all the attributes is cheap.
If a filesystem doesn't implemement the fileattr API, just fall back to
f_op->ioctl(). When all filesystems are converted, the fallback can be
removed.
32bit compat ioctls are now handled by the generic code as well.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull OPP (Operating Performance Points) framework updates for v5.13
from Viresh Kumar:
"This adds devm variants for OPP APIs and updates few of the users
as well (Yangtao Li and Dmitry Osipenko)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
memory: samsung: exynos5422-dmc: Convert to use resource-managed OPP API
drm/panfrost: Convert to use resource-managed OPP API
drm/lima: Convert to use resource-managed OPP API
mmc: sdhci-msm: Convert to use resource-managed OPP API
spi: spi-qcom-qspi: Convert to use resource-managed OPP API
spi: spi-geni-qcom: Convert to use resource-managed OPP API
serial: qcom_geni_serial: Convert to use resource-managed OPP API
opp: Change return type of devm_pm_opp_attach_genpd()
opp: Change return type of devm_pm_opp_register_set_opp_helper()
opp: Add devres wrapper for dev_pm_opp_of_add_table
opp: Add devres wrapper for dev_pm_opp_set_supported_hw
opp: Add devres wrapper for dev_pm_opp_set_regulators
opp: Add devres wrapper for dev_pm_opp_set_clkname
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for v5.13 from Viresh Kumar:
"- Fix typos in s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from
1000 MHz (Pali Rohár and Marek Behún).
- cpufreq-dt: Return -EPROBE_DEFER on failure to add table (Quanyang
Wang).
- Minor cleanup in cppc driver (Tom Saeger).
- Add frequency invariance support for CPPC driver and generalize
freq invariance support arch-topology driver (Viresh Kumar)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: armada-37xx: Fix module unloading
cpufreq: armada-37xx: Remove cur_frequency variable
cpufreq: armada-37xx: Fix determining base CPU frequency
cpufreq: armada-37xx: Fix driver cleanup when registration failed
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
cpufreq: armada-37xx: Fix the AVS value for load L1
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
cpufreq: armada-37xx: Fix setting TBG parent for load levels
cpufreq: dt: dev_pm_opp_of_cpumask_add_table() may return -EPROBE_DEFER
cpufreq: cppc: simplify default delay_us setting
cpufreq: Rudimentary typos fix in the file s5pv210-cpufreq.c
cpufreq: CPPC: Add support for frequency invariance
arch_topology: Export arch_freq_scale and helpers
arch_topology: Allow multiple entities to provide sched_freq_tick() callback
arch_topology: Rename freq_scale as arch_freq_scale
|
|
The entry from EL0 code checks the TFSRE0_EL1 register for any
asynchronous tag check faults in user space and sets the
TIF_MTE_ASYNC_FAULT flag. This is not done atomically, potentially
racing with another CPU calling set_tsk_thread_flag().
Replace the non-atomic ORR+STR with an STSET instruction. While STSET
requires ARMv8.1 and an assembler that understands LSE atomics, the MTE
feature is part of ARMv8.5 and already requires an updated assembler.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 637ec831ea4f ("arm64: mte: Handle synchronous and asynchronous tag check faults")
Cc: <stable@vger.kernel.org> # 5.10.x
Reported-by: Will Deacon <will@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210409173710.18582-1-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This reverts commit 63cd78617350dae99cc5fbd8f643b83ee819fe33 as it
causes a build error:
depmod: ERROR: Cycle detected: usbcore -> typec -> usbcore
depmod: ERROR: Found 2 modules in dependency cycles!
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20210412213655.3776e15e@canb.auug.org.au
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Patch adds flag EP_UNCONFIGURED to detect whether endpoint was
unconfigured. This flag is set in cdnsp_reset_device after Reset Device
command. Among others this command disables all non control endpoints.
Flag is used in cdnsp_gadget_ep_disable to protect controller against
invoking Configure Endpoint command on disabled endpoint. Lack of this
protection in some cases caused that Configure Endpoint command completed
with Context State Error code completion.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
|
|
The variable ret is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
|
|
dma_alloc_coherent already zeroes out memory, so memset is not needed.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Reviewed-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
|
|
dma_alloc_coherent() might fail on the platform with a small
DMA region.
To avoid such failure in cdns3_prepare_aligned_request_buf(),
dma_alloc_coherent() is replaced with dma_alloc_noncoherent()
to allocate aligned request buffer of dynamic length.
Reported-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Sanket Parmar <sparmar@cadence.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
|
|
Allocation of DMA coherent memory in atomic context using
dma_alloc_coherent() might fail on platforms with smaller
DMA region.
To fix it, dma_alloc_coherent() is replaced with dma_pool
API to allocate a smaller chunk of DMA coherent memory for
TRB rings.
Reported-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Sanket Parmar <sparmar@cadence.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
|
|
The patch c450e48eb570: "usb: cdns3: add power lost support for
system resume" from Feb 18, 2021, leads to the following static
checker warning:
drivers/usb/cdns3/core.c:551 cdns_resume()
error: uninitialized symbol 'ret'.
drivers/usb/cdns3/core.c
544
545 if (!role_changed) {
546 if (cdns->role == USB_ROLE_HOST)
547 ret = cdns_drd_host_on(cdns);
548 else if (cdns->role == USB_ROLE_DEVICE)
549 ret = cdns_drd_gadget_on(cdns);
"ret" is uninitialized at else branch.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
|
|
The function cdns_imx_system_resume() may have no callers depending
on configuration, so it must be marked __maybe_unused to avoid
harmless warning:
drivers/usb/cdns3/cdns3-imx.c:378:12: warning:
'cdns_imx_system_resume' defined but not used [-Wunused-function]
378 | static int cdns_imx_system_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
Fixes: 67982dfa59de ("usb: cdns3: imx: add power lost support for system resume")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
|
|
It is not correct using %pa to print virtual address of request->trb, and
it is hard to print its physical address due to the virtual address is
zero before using. It could use index (start_trb/end_trb) to know the
current trb position, so no matter virtual address or physical address
for request-trb is not so meaningful.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
|
|
imx need special handle when controller lost power
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
|
|
If the controller lost its power during the system suspend, we need
to do all initialiation operations.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
|
|
the panel
After the recently added commit fe0f1e3bfdfe ("drm/i915: Shut down
displays gracefully on reboot"), the DSI panel on a Cherry Trail based
Predia Basic tablet would no longer properly light up after reboot.
I've managed to reproduce this without rebooting by doing:
chvt 3; echo 1 > /sys/class/graphics/fb0/blank;\
echo 0 > /sys/class/graphics/fb0/blank
Which rapidly turns the panel off and back on again.
The vlv_dsi.c code uses an intel_dsi_msleep() helper for the various delays
used for panel on/off, since starting with MIPI-sequences version >= 3 the
delays are already included inside the MIPI-sequences.
The problems exposed by the "Shut down displays gracefully on reboot"
change, show that using this helper for the panel_pwr_cycle_delay is
not the right thing to do. This has not been noticed until now because
normally the panel never is cycled off and directly on again in quick
succession.
Change the msleep for the panel_pwr_cycle_delay to a normal msleep()
call to avoid the panel staying black after a quick off + on cycle.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325114823.44922-1-hdegoede@redhat.com
(cherry picked from commit 2878b29fc25a0dac0e1c6c94177f07c7f94240f0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Don't zero out the watermarks for the Y plane since we've already
computed them when computing the UV plane's watermarks (since the
UV plane always appears before ethe Y plane when iterating through
the planes).
This leads to allocating no DDB for the Y plane since .min_ddb_alloc
also gets zeroed. And that of course leads to underruns when scanning
out planar formats.
Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: dbf71381d733 ("drm/i915: Nuke intel_atomic_crtc_state_for_each_plane_state() from skl+ wm code")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210327005945.4929-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit f99b805fb9413ff007ca0b6add871737664117dd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Looks like that there actually are another subset of laptops on the market
that don't support the Intel HDR backlight interface, but do advertise
support for the VESA DPCD backlight interface despite the fact it doesn't
seem to work.
Note though I'm not entirely clear on this - on one of the machines where
this issue was observed, I also noticed that we appeared to be rejecting
the VBT defined backlight frequency in
intel_dp_aux_vesa_calc_max_backlight(). It's noted in this function that:
/* Use highest possible value of Pn for more granularity of brightness
* adjustment while satifying the conditions below.
* ...
* - FxP is within 25% of desired value.
* Note: 25% is arbitrary value and may need some tweak.
*/
So it's possible that this value might just need to be tweaked, but for now
let's just disable the VESA backlight interface unless it's specified in
the VBT just to be safe. We might be able to try enabling this again by
default in the future.
Fixes: 2227816e647a ("drm/i915/dp: Allow forcing specific interfaces through enable_dpcd_backlight")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/3169
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318170204.513000-1-lyude@redhat.com
(cherry picked from commit 9e2eb6d5380e9dadcd2baecb51f238e5eba94bee)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
