| Age | Commit message (Collapse) | Author |
|---|
|
This is needed to force a rebuild of bpf.o when one of its dependencies
(e.g. uapi/linux/bpf.h) is updated.
Add a phony target.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Wang Nan <wangnan0@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove a useless ifdef __NR_bpf as requested by Wang Nan.
Inline one-line static functions as it was in the bpf_sys.h file.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/828ab1ff-4dcf-53ff-c97b-074adb895006@huawei.com
Acked-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using a reader-writer lock in fast path is silly, when we can
instead use RCU or a seqlock.
For mlx4 hwstamp clock, a seqlock is the way to go, removing
two atomic operations and false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This interrupt handler is broken in several ways:
- It loops forever when the op code is not decodeable
- It never returns IRQ_HANDLED because the only way to exit the loop
returns IRQ_NONE unconditionally.
The whole concept of this is broken. Creating devices in an interrupt
handler is beyond any point of sanity.
Make it at least behave halfways sane so accidental users do not have to
deal with a hard to debug lockup.
Fixes: e809c22b8fb028 ("goldfish: add the goldfish virtual bus")
Reported-by: Gabriel C <nix.or.die@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The goldfish platform code registers the platform device unconditionally
which causes havoc in several ways if the goldfish_pdev_bus driver is
enabled:
- Access to the hardcoded physical memory region, which is either not
available or contains stuff which is completely unrelated.
- Prevents that the interrupt of the serial port can be requested
- In case of a spurious interrupt it goes into a infinite loop in the
interrupt handler of the pdev_bus driver (which needs to be fixed
seperately).
Add a 'goldfish' command line option to make the registration opt-in when
the platform is compiled in.
I'm seriously grumpy about this engineering trainwreck, which has seven
SOBs from Intel developers for 50 lines of code. And none of them figured
out that this is broken. Impressive fail!
Fixes: ddd70cf93d78 ("goldfish: platform device for x86")
Reported-by: Gabriel C <nix.or.die@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move all declarations and definitions in keyspan.h to keyspan.c, which
is the only place were they are used.
This specifically moves the driver device-id tables and usb-serial
driver definitions to the source file where they are expected to be
found.
While at it, fix up some multi-line comments and minor white-space
issues (spaces instead of tabs and superfluous white space).
Note that the information in the comment header of the removed header
file is also present in the source file.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Move the driver device-id tables and usb-serial driver definitions to
the source file where they are expected to be found.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Document pci_alloc_irq_vectors() instead of the deprecated pci_enable_msi()
and pci_enable_msix() APIs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
When a new disk shows up, sysfs queue directory is created before elevator
is registered. This allows a user to attempt a scheduler switch even though
the initial registration hasn't completed yet.
In one scenario, blk_register_queue() calls elv_register_queue() and
right before cfq_registered_queue() is called, another process executes
elevator_switch() and replaces q->elevator with deadline scheduler. When
cfq_registered_queue() executes it interprets e->elevator_data as struct
cfq_data even though it is actually struct deadline_data.
Grab q->sysfs_lock in blk_register_queue() to synchronize with sysfs
callers.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
In addition to making PME non-modular, d7def2040077 ("PCI/PME: Make
explicitly non-modular") removed the pcie_pme_driver .remove() method,
pcie_pme_remove().
pcie_pme_remove() freed the PME IRQ that was requested in pci_pme_probe().
The fact that we don't free the IRQ after d7def2040077 causes the following
crash when removing a PCIe port device via /sys:
------------[ cut here ]------------
kernel BUG at drivers/pci/msi.c:370!
invalid opcode: 0000 [#1] SMP
Modules linked in:
CPU: 1 PID: 14509 Comm: sh Tainted: G W 4.8.0-rc1-yh-00012-gd29438d
RIP: 0010:[<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190
...
Call Trace:
[<ffffffff9758cda4>] pci_disable_msi+0x34/0x40
[<ffffffff97583817>] cleanup_service_irqs+0x27/0x30
[<ffffffff97583e9a>] pcie_port_device_remove+0x2a/0x40
[<ffffffff97584250>] pcie_portdrv_remove+0x40/0x50
[<ffffffff97576d7b>] pci_device_remove+0x4b/0xc0
[<ffffffff9785ebe6>] __device_release_driver+0xb6/0x150
[<ffffffff9785eca5>] device_release_driver+0x25/0x40
[<ffffffff975702e4>] pci_stop_bus_device+0x74/0xa0
[<ffffffff975704ea>] pci_stop_and_remove_bus_device_locked+0x1a/0x30
[<ffffffff97578810>] remove_store+0x50/0x70
[<ffffffff9785a378>] dev_attr_store+0x18/0x30
[<ffffffff97260b64>] sysfs_kf_write+0x44/0x60
[<ffffffff9725feae>] kernfs_fop_write+0x10e/0x190
[<ffffffff971e13f8>] __vfs_write+0x28/0x110
[<ffffffff970b0fa4>] ? percpu_down_read+0x44/0x80
[<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0
[<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0
[<ffffffff971e1f04>] vfs_write+0xc4/0x180
[<ffffffff971e3089>] SyS_write+0x49/0xa0
[<ffffffff97001a46>] do_syscall_64+0xa6/0x1b0
[<ffffffff9819201e>] entry_SYSCALL64_slow_path+0x25/0x25
...
RIP [<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190
RSP <ffff89ad3085bc48>
---[ end trace f4505e1dac5b95d3 ]---
Segmentation fault
Restore pcie_pme_remove().
[bhelgaas: changelog]
Fixes: d7def2040077 ("PCI/PME: Make explicitly non-modular")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: stable@vger.kernel.org # v4.9+
|
|
The create target ioctl takes a lun begin and lun end parameter, which
defines the range of luns to initialize a target with. If the user does
not set the parameters, it default to only using lun 0. Instead,
defaults to use all luns in the OCSSD, as it is the usual behaviour
users want.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
If one specifies the end lun id to be the absolute number of luns,
without taking zero indexing into account, the lightnvm core will pass
the off-by-one end lun id to target creation, which then panics during
nvm_ioctl_dev_create.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The switch to the new DSA binding used "marvell,mv88e6095" for the
compatible property which doesn't exist, use "marvell,mv88e6085"
instead.
Fixes: 455b82f03f52 ("ARM: dts: armada-385-linksys: Utilize new DSA binding")
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
The OF graph API leaves too much of the graph walking to clients when
in many cases the driver doesn't care about accessing the port or
endpoint nodes. The drivers typically just want the device connected via
a particular graph connection. of_graph_get_remote_node provides this
functionality.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The destination address in a listening rdma_id does not have an address
family. Since address family in both sides of a connection must be the
same in rdma_bind_addr() we set the address family of the destination to
the address family of the source.
This patch serves the logic in cma_port_is_unique() which requires to
know if destination address that is associated with a rdma_id is any address
(cma_zero_addr() and cma_loopback_addr()).
This can happen when port reuse is checked for a port number
that is being listened to.
Fixes: 19b752a19dce ("IB/cma: Allow port reuse for rdma_id")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add new entry to the RDMA-CM configfs that allows users
to select default TOS for RDMA-CM QPs.
This is useful for users that want to control the TOS for legacy
applications without changing their code.
Application that sets the TOS explicitly using the rdma_set_option
API will continue to work as expected, meaning overriding the configfs
value.
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch avoids unnecessary type casting from void to net_device.
CC: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When sending packet to destination that was not resolved yet
via path query, the driver keeps the skb and tries to re-send it
again when the path is resolved.
But when re-sending via dev_queue_xmit the kernel doesn't call
to dev_hard_header, so IPoIB needs to keep 20 bytes in the skb
and to put the destination address inside them.
In that way the dev_start_xmit will have the correct destination,
and the driver won't take the destination from the skb->data, while
nothing exists there, which causes to packet be be dropped.
The test flow is:
1. Run the SM on remote node,
2. Restart the driver.
4. Ping some destination,
3. Observe that first ICMP request will be dropped.
Fixes: fc791b633515 ("IB/ipoib: move back IB LL address into the hard header")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The compatible should be 98dx4251 not 98dx4521.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
When the "ib_virt" cap is set, configuration of port capabilities need
to be done through mlx5_core_modify_hca_vport_context.
Since modify_hca_vport_context accepts mask and value, there is no need
to read the port capabilities and calculate the new cap values so we
avoid the mutex when ib_virt is set.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The hashtable and guarding spinlock are global data structures,
we can inititalize them statically.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170124212116.4568-1-david@redhat.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As pointed out by clang, we were not providing a prototype for a
function before using it:
util/parse-events.y:699:6: error: conflicting types for 'parse_events_error'
void parse_events_error(YYLTYPE *loc, void *data,
^
/tmp/build/perf/util/parse-events-bison.c:2224:7: note: previous implicit declaration is here
yyerror (&yylloc, _data, scanner, YY_("syntax error"));
^
/tmp/build/perf/util/parse-events-bison.c:65:25: note: expanded from macro 'yyerror'
#define yyerror parse_events_error
1 error generated.
One line fix it.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170215130605.GC4020@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
ath.git patches for 4.11. Major changes:
ath10k
* when trying older firmware versions don't confuse user with error messages
ath9k
* fix crash in AP mode (regression)
* fix relayfs crash (regression)
* fix initialisation with AR9340 and AR9550
|
|
Nested_vmx_run is split into two parts: the part that handles the
VMLAUNCH/VMRESUME instruction, and the part that modifies the vcpu state
to transition from VMX root mode to VMX non-root mode. The latter will
be used when restoring the checkpointed state of a vCPU that was in VMX
operation when a snapshot was taken.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The checks performed on the contents of the vmcs12 are extracted from
nested_vmx_run so that they can be used to validate a vmcs12 that has
been restored from a checkpoint.
Signed-off-by: Jim Mattson <jmattson@google.com>
[Change prepare_vmcs02 and nested_vmx_load_cr3's last argument to u32,
to match check_vmentry_postreqs. Update comments for singlestep
handling. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Perform the checks on vmcs12 state early, but defer the gpa->hpa lookups
until after prepare_vmcs02. Later, when we restore the checkpointed
state of a vCPU in guest mode, we will not be able to do the gpa->hpa
lookups when the restore is done.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Handle_vmptrld is split into two parts: the part that handles the
VMPTRLD instruction, and the part that establishes the current VMCS
pointer. The latter will be used when restoring the checkpointed state
of a vCPU that had a valid VMCS pointer when a snapshot was taken.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Handle_vmon is split into two parts: the part that handles the VMXON
instruction, and the part that modifies the vcpu state to transition
from legacy mode to VMX operation. The latter will be used when
restoring the checkpointed state of a vCPU that was in VMX operation
when a snapshot was taken.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Split prepare_vmcs12 into two parts: the part that stores the current L2
guest state and the part that sets up the exit information fields. The
former will be used when checkpointing the vCPU's VMX state.
Modify prepare_vmcs02 so that it can construct a vmcs02 midway through
L2 execution, using the checkpointed L2 guest state saved into the
cached vmcs12 above.
Signed-off-by: Jim Mattson <jmattson@google.com>
[Rebasing: add from_vmentry argument to prepare_vmcs02 instead of using
vmx->nested.nested_run_pending, because it is no longer 1 at the
point prepare_vmcs02 is called. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since bf9f6ac8d749 ("KVM: Update Posted-Interrupts Descriptor when vCPU
is blocked", 2015-09-18) the posted interrupt descriptor is checked
unconditionally for PIR.ON. Therefore we don't need KVM_REQ_EVENT to
trigger the scan and, if NMIs or SMIs are not involved, we can avoid
the complicated event injection path.
Calling kvm_vcpu_kick if PIR.ON=1 is also useless, though it has been
there since APICv was introduced.
However, without the KVM_REQ_EVENT safety net KVM needs to be much
more careful about races between vmx_deliver_posted_interrupt and
vcpu_enter_guest. First, the IPI for posted interrupts may be issued
between setting vcpu->mode = IN_GUEST_MODE and disabling interrupts.
If that happens, kvm_trigger_posted_interrupt returns true, but
smp_kvm_posted_intr_ipi doesn't do anything about it. The guest is
entered with PIR.ON, but the posted interrupt IPI has not been sent
and the interrupt is only delivered to the guest on the next vmentry
(if any). To fix this, disable interrupts before setting vcpu->mode.
This ensures that the IPI is delayed until the guest enters non-root mode;
it is then trapped by the processor causing the interrupt to be injected.
Second, the IPI may be issued between kvm_x86_ops->sync_pir_to_irr(vcpu)
and vcpu->mode = IN_GUEST_MODE. In this case, kvm_vcpu_kick is called
but it (correctly) doesn't do anything because it sees vcpu->mode ==
OUTSIDE_GUEST_MODE. Again, the guest is entered with PIR.ON but no
posted interrupt IPI is pending; this time, the fix for this is to move
the RVI update after IN_GUEST_MODE.
Both issues were mostly masked by the liberal usage of KVM_REQ_EVENT,
though the second could actually happen with VT-d posted interrupts.
In both race scenarios KVM_REQ_EVENT would cancel guest entry, resulting
in another vmentry which would inject the interrupt.
This saves about 300 cycles on the self_ipi_* tests of vmexit.flat.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Calls to apic_find_highest_irr are scanning IRR twice, once
in vmx_sync_pir_from_irr and once in apic_search_irr. Change
sync_pir_from_irr to get the new maximum IRR from kvm_apic_update_irr;
now that it does the computation, it can also do the RVI write.
In order to avoid complications in svm.c, make the callback optional.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add return value to __kvm_apic_update_irr/kvm_apic_update_irr.
Move vmx_sync_pir_to_irr around.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vcpu_run calls kvm_vcpu_running, not kvm_arch_vcpu_runnable,
and the former does not call check_nested_events.
Once KVM_REQ_EVENT is removed from the APICv interrupt injection
path, however, this would leave no place to trigger a vmexit
from L2 to L1, causing a missed interrupt delivery while in guest
mode. This is caught by the "ack interrupt on exit" test in
vmx.flat.
[This does not change the calls to check_nested_events in
inject_pending_event. That is material for a separate cleanup.]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pending interrupts might be in the PI descriptor when the
LAPIC is restored from an external state; we do not want
them to be injected.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As in the SVM patch, the guest physical address is passed by
VMX to x86_emulate_instruction already, so mark the GPA as available
in vcpu->arch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This was somehow lost between v3 and the merged version in Maarten's
patch merged as:
commit f2d580b9a8149735cbc4b59c4a8df60173658140
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Wed May 4 14:38:26 2016 +0200
drm/core: Do not preserve framebuffer on rmfb, v4.
This introduces a slight behavioral change to rmfb. Instead of
disabling a crtc when the primary plane is disabled, we try to
preserve it.
Apart from old versions of the vmwgfx xorg driver, there is
nothing depending on rmfb disabling a crtc. Since vmwgfx is
a legacy driver we can safely only disable the plane with atomic.
If this commit is rejected by the driver then we will still fall
back to the old behavior and turn off the crtc.
v2:
- Remove plane->fb assignment, done by drm_atomic_clean_old_fb.
- Add WARN_ON when atomic_remove_fb fails.
- Always call drm_atomic_state_put.
v3:
- Use drm_drv_uses_atomic_modeset
- Handle the case where the first plane-disable-only commit fails
with -EINVAL. Some drivers do not support this, fall back to
disabling all crtc's in this case.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/66fc3da5-697b-1613-0a67-a5293209f0dc@linux.intel.com
|
|
The alias->unit field is an array, so to check that it is not set we
should see if it is an empty string, i.e. alias->unit[0], instead of
checking alias->unit != NULL, as this will _always_ evaluate to 'true'.
Pointed out by clang.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170214182435.GD4458@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now that we have XZR-safe helpers for fiddling with registers, use these
in the arm64 kprobes code rather than open-coding the logic.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In emulate_mrs() we may erroneously write back to the user SP rather
than XZR if we trap an MRS instruction where Xt == 31.
Use the new pt_regs_write_reg() helper to handle this correctly.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 77c97b4ee21290f5 ("arm64: cpufeature: Expose CPUID registers by emulation")
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Currently we hand-roll XZR-safe register handling in
user_cache_maint_handler(), though we forget to do the same in
ctr_read_handler(), and may erroneously write back to the user SP rather
than XZR.
Use the new helpers to handle these cases correctly and consistently.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 116c81f427ff6c53 ("arm64: Work around systems with mismatched cache line sizes")
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In A64, XZR and the SP share the same encoding (31), and whether an
instruction accesses XZR or SP for a particular register parameter
depends on the definition of the instruction.
We store the SP in pt_regs::regs[31], and thus when emulating
instructions, we must be careful to not erroneously read from or write
back to the saved SP. Unfortunately, we often fail to be this careful.
In all cases, instructions using a transfer register parameter Xt use
this to refer to XZR rather than SP. This patch adds helpers so that we
can more easily and consistently handle these cases.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In a randconfig build I ran into this build error:
arch/arm64/kernel/entry-ftrace.S: Assembler messages:
arch/arm64/kernel/entry-ftrace.S:101: Error: unknown mnemonic `ldr_l' -- `ldr_l x2,ftrace_trace_function'
The macro is defined in asm/assembler.h, so we should include that file.
Fixes: 829d2bd13392 ("arm64: entry-ftrace.S: avoid open-coded {adr,ldr}_l")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
With 4 levels of 16KB pages, we get this warning about the fact that we are
copying a whole page into an array that is declared as having only two pointers
for the top level of the page table:
arch/arm64/mm/mmu.c: In function 'paging_init':
arch/arm64/mm/mmu.c:528:2: error: 'memcpy' writing 16384 bytes into a region of size 16 overflows the destination [-Werror=stringop-overflow=]
This is harmless since we actually reserve a whole page in the definition of the
array that comes from, and just the extern declaration is short. The pgdir
is initialized to zero either way, so copying the actual entries here seems
like the best solution.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
This brings in two fixes for potential host crashes, from Ben
Herrenschmidt and Nick Piggin.
|
|
We cannot do printk() from tk_debug_account_sleep_time(), because
tk_debug_account_sleep_time() is called under tk_core seq lock.
The reason why printk() is unsafe there is that console_sem may
invoke scheduler (up()->wake_up_process()->activate_task()), which,
in turn, can return back to timekeeping code, for instance, via
get_time()->ktime_get(), deadlocking the system on tk_core seq lock.
[ 48.950592] ======================================================
[ 48.950622] [ INFO: possible circular locking dependency detected ]
[ 48.950622] 4.10.0-rc7-next-20170213+ #101 Not tainted
[ 48.950622] -------------------------------------------------------
[ 48.950622] kworker/0:0/3 is trying to acquire lock:
[ 48.950653] (tk_core){----..}, at: [<c01cc624>] retrigger_next_event+0x4c/0x90
[ 48.950683]
but task is already holding lock:
[ 48.950683] (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90
[ 48.950714]
which lock already depends on the new lock.
[ 48.950714]
the existing dependency chain (in reverse order) is:
[ 48.950714]
-> #5 (hrtimer_bases.lock){-.-...}:
[ 48.950744] _raw_spin_lock_irqsave+0x50/0x64
[ 48.950775] lock_hrtimer_base+0x28/0x58
[ 48.950775] hrtimer_start_range_ns+0x20/0x5c8
[ 48.950775] __enqueue_rt_entity+0x320/0x360
[ 48.950805] enqueue_rt_entity+0x2c/0x44
[ 48.950805] enqueue_task_rt+0x24/0x94
[ 48.950836] ttwu_do_activate+0x54/0xc0
[ 48.950836] try_to_wake_up+0x248/0x5c8
[ 48.950836] __setup_irq+0x420/0x5f0
[ 48.950836] request_threaded_irq+0xdc/0x184
[ 48.950866] devm_request_threaded_irq+0x58/0xa4
[ 48.950866] omap_i2c_probe+0x530/0x6a0
[ 48.950897] platform_drv_probe+0x50/0xb0
[ 48.950897] driver_probe_device+0x1f8/0x2cc
[ 48.950897] __driver_attach+0xc0/0xc4
[ 48.950927] bus_for_each_dev+0x6c/0xa0
[ 48.950927] bus_add_driver+0x100/0x210
[ 48.950927] driver_register+0x78/0xf4
[ 48.950958] do_one_initcall+0x3c/0x16c
[ 48.950958] kernel_init_freeable+0x20c/0x2d8
[ 48.950958] kernel_init+0x8/0x110
[ 48.950988] ret_from_fork+0x14/0x24
[ 48.950988]
-> #4 (&rt_b->rt_runtime_lock){-.-...}:
[ 48.951019] _raw_spin_lock+0x40/0x50
[ 48.951019] rq_offline_rt+0x9c/0x2bc
[ 48.951019] set_rq_offline.part.2+0x2c/0x58
[ 48.951049] rq_attach_root+0x134/0x144
[ 48.951049] cpu_attach_domain+0x18c/0x6f4
[ 48.951049] build_sched_domains+0xba4/0xd80
[ 48.951080] sched_init_smp+0x68/0x10c
[ 48.951080] kernel_init_freeable+0x160/0x2d8
[ 48.951080] kernel_init+0x8/0x110
[ 48.951080] ret_from_fork+0x14/0x24
[ 48.951110]
-> #3 (&rq->lock){-.-.-.}:
[ 48.951110] _raw_spin_lock+0x40/0x50
[ 48.951141] task_fork_fair+0x30/0x124
[ 48.951141] sched_fork+0x194/0x2e0
[ 48.951141] copy_process.part.5+0x448/0x1a20
[ 48.951171] _do_fork+0x98/0x7e8
[ 48.951171] kernel_thread+0x2c/0x34
[ 48.951171] rest_init+0x1c/0x18c
[ 48.951202] start_kernel+0x35c/0x3d4
[ 48.951202] 0x8000807c
[ 48.951202]
-> #2 (&p->pi_lock){-.-.-.}:
[ 48.951232] _raw_spin_lock_irqsave+0x50/0x64
[ 48.951232] try_to_wake_up+0x30/0x5c8
[ 48.951232] up+0x4c/0x60
[ 48.951263] __up_console_sem+0x2c/0x58
[ 48.951263] console_unlock+0x3b4/0x650
[ 48.951263] vprintk_emit+0x270/0x474
[ 48.951293] vprintk_default+0x20/0x28
[ 48.951293] printk+0x20/0x30
[ 48.951324] kauditd_hold_skb+0x94/0xb8
[ 48.951324] kauditd_thread+0x1a4/0x56c
[ 48.951324] kthread+0x104/0x148
[ 48.951354] ret_from_fork+0x14/0x24
[ 48.951354]
-> #1 ((console_sem).lock){-.....}:
[ 48.951385] _raw_spin_lock_irqsave+0x50/0x64
[ 48.951385] down_trylock+0xc/0x2c
[ 48.951385] __down_trylock_console_sem+0x24/0x80
[ 48.951385] console_trylock+0x10/0x8c
[ 48.951416] vprintk_emit+0x264/0x474
[ 48.951416] vprintk_default+0x20/0x28
[ 48.951416] printk+0x20/0x30
[ 48.951446] tk_debug_account_sleep_time+0x5c/0x70
[ 48.951446] __timekeeping_inject_sleeptime.constprop.3+0x170/0x1a0
[ 48.951446] timekeeping_resume+0x218/0x23c
[ 48.951477] syscore_resume+0x94/0x42c
[ 48.951477] suspend_enter+0x554/0x9b4
[ 48.951477] suspend_devices_and_enter+0xd8/0x4b4
[ 48.951507] enter_state+0x934/0xbd4
[ 48.951507] pm_suspend+0x14/0x70
[ 48.951507] state_store+0x68/0xc8
[ 48.951538] kernfs_fop_write+0xf4/0x1f8
[ 48.951538] __vfs_write+0x1c/0x114
[ 48.951538] vfs_write+0xa0/0x168
[ 48.951568] SyS_write+0x3c/0x90
[ 48.951568] __sys_trace_return+0x0/0x10
[ 48.951568]
-> #0 (tk_core){----..}:
[ 48.951599] lock_acquire+0xe0/0x294
[ 48.951599] ktime_get_update_offsets_now+0x5c/0x1d4
[ 48.951629] retrigger_next_event+0x4c/0x90
[ 48.951629] on_each_cpu+0x40/0x7c
[ 48.951629] clock_was_set_work+0x14/0x20
[ 48.951660] process_one_work+0x2b4/0x808
[ 48.951660] worker_thread+0x3c/0x550
[ 48.951660] kthread+0x104/0x148
[ 48.951690] ret_from_fork+0x14/0x24
[ 48.951690]
other info that might help us debug this:
[ 48.951690] Chain exists of:
tk_core --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock
[ 48.951721] Possible unsafe locking scenario:
[ 48.951721] CPU0 CPU1
[ 48.951721] ---- ----
[ 48.951721] lock(hrtimer_bases.lock);
[ 48.951751] lock(&rt_b->rt_runtime_lock);
[ 48.951751] lock(hrtimer_bases.lock);
[ 48.951751] lock(tk_core);
[ 48.951782]
*** DEADLOCK ***
[ 48.951782] 3 locks held by kworker/0:0/3:
[ 48.951782] #0: ("events"){.+.+.+}, at: [<c0156590>] process_one_work+0x1f8/0x808
[ 48.951812] #1: (hrtimer_work){+.+...}, at: [<c0156590>] process_one_work+0x1f8/0x808
[ 48.951843] #2: (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90
[ 48.951843] stack backtrace:
[ 48.951873] CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.10.0-rc7-next-20170213+
[ 48.951904] Workqueue: events clock_was_set_work
[ 48.951904] [<c0110208>] (unwind_backtrace) from [<c010c224>] (show_stack+0x10/0x14)
[ 48.951934] [<c010c224>] (show_stack) from [<c04ca6c0>] (dump_stack+0xac/0xe0)
[ 48.951934] [<c04ca6c0>] (dump_stack) from [<c019b5cc>] (print_circular_bug+0x1d0/0x308)
[ 48.951965] [<c019b5cc>] (print_circular_bug) from [<c019d2a8>] (validate_chain+0xf50/0x1324)
[ 48.951965] [<c019d2a8>] (validate_chain) from [<c019ec18>] (__lock_acquire+0x468/0x7e8)
[ 48.951995] [<c019ec18>] (__lock_acquire) from [<c019f634>] (lock_acquire+0xe0/0x294)
[ 48.951995] [<c019f634>] (lock_acquire) from [<c01d0ea0>] (ktime_get_update_offsets_now+0x5c/0x1d4)
[ 48.952026] [<c01d0ea0>] (ktime_get_update_offsets_now) from [<c01cc624>] (retrigger_next_event+0x4c/0x90)
[ 48.952026] [<c01cc624>] (retrigger_next_event) from [<c01e4e24>] (on_each_cpu+0x40/0x7c)
[ 48.952056] [<c01e4e24>] (on_each_cpu) from [<c01cafc4>] (clock_was_set_work+0x14/0x20)
[ 48.952056] [<c01cafc4>] (clock_was_set_work) from [<c015664c>] (process_one_work+0x2b4/0x808)
[ 48.952087] [<c015664c>] (process_one_work) from [<c0157774>] (worker_thread+0x3c/0x550)
[ 48.952087] [<c0157774>] (worker_thread) from [<c015d644>] (kthread+0x104/0x148)
[ 48.952087] [<c015d644>] (kthread) from [<c0107830>] (ret_from_fork+0x14/0x24)
Replace printk() with printk_deferred(), which does not call into
the scheduler.
Fixes: 0bf43f15db85 ("timekeeping: Prints the amounts of time spent during suspend")
Reported-and-tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: "[4.9+]" <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170215044332.30449-1-sergey.senozhatsky@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
That makes all the quirks table look more consistent.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
It's not appreciated to place quirks everywhere, let's
put them together just like what we do for USB, PCI etc.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Rename mmc_fixup_methods to sdio_fixup_methods to better
reflect that it's for sdio devices. So we could also pass
on it from sdio card's probe sequence just like what we do
for eMMC and block there.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Consolidate all the sdio devices' IDs into sdio_ids.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
