summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-15mmc: core: change quirks.c to be a header fileShawn Lin
Rename quirks.c to quirks.h, and include it for individual C files which need it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15mmc: sdhci-cadence: fix bit shift of read data from PHY portMasahiro Yamada
This macro is currently unused, but it may be useful for debug use. Fix it just in case. Fixes: ff6af28faff5 ("mmc: sdhci-cadence: add Cadence SD4HC support") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15MIPS: lantiq: Set physical_memsizeHauke Mehrtens
physical_memsize is needed by the vpe loader code and the platform specific code has to define it. This value will be given to the firmware loaded with the VPE loader. I am not aware of any standard interface or better value to provide here. Reported-by: kbuild test robot <lkp@intel.com> Fixes: d9ae4f18c0d2 ("MIPS: Lantiq: Activate more drivers in default configuration") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: John Crispin <john@phrozen.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14908/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-15esp: Add a software GRO codepathSteffen Klassert
This patch adds GRO ifrastructure and callbacks for ESP on ipv4 and ipv6. In case the GRO layer detects an ESP packet, the esp{4,6}_gro_receive() function does a xfrm state lookup and calls the xfrm input layer if it finds a matching state. The packet will be decapsulated and reinjected it into layer 2. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15xfrm: Extend the sec_path for IPsec offloadingSteffen Klassert
We need to keep per packet offloading informations across the layers. So we extend the sec_path to carry these for the input and output offload codepath. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15drm/dp/mst: fix kernel oops when turning off secondary monitorPierre-Louis Bossart
100% reproducible issue found on SKL SkullCanyon NUC with two external DP daisy-chained monitors in DP/MST mode. When turning off or changing the input of the second monitor the machine stops with a kernel oops. This issue happened with 4.8.8 as well as drm/drm-intel-nightly. This issue is traced to an inconsistent control flow in drm_dp_update_payload_part1(): the 'port' pointer is set to NULL at the same time as 'req_payload.num_slots' is set to zero, but the pointer is dereferenced even when req_payload.num_slot is zero. The problematic dereference was introduced in commit dfda0df34 ("drm/mst: rework payload table allocation to conform better") and may impact all versions since v3.18 The fix suggested by Chris Wilson removes the kernel oops and was found to work well after 10mn of monkey-testing with the second monitor power and input buttons Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98990 Fixes: dfda0df34264 ("drm/mst: rework payload table allocation to conform better.") Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: <stable@vger.kernel.org> # v3.18+ Tested-by: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487076561-2169-1-git-send-email-jani.nikula@intel.com
2017-02-15fuse: fix use after free issue in fuse_dev_do_read()Sahitya Tummala
There is a potential race between fuse_dev_do_write() and request_wait_answer() contexts as shown below: TASK 1: __fuse_request_send(): |--spin_lock(&fiq->waitq.lock); |--queue_request(); |--spin_unlock(&fiq->waitq.lock); |--request_wait_answer(): |--if (test_bit(FR_SENT, &req->flags)) <gets pre-empted after it is validated true> TASK 2: fuse_dev_do_write(): |--clears bit FR_SENT, |--request_end(): |--sets bit FR_FINISHED |--spin_lock(&fiq->waitq.lock); |--list_del_init(&req->intr_entry); |--spin_unlock(&fiq->waitq.lock); |--fuse_put_request(); |--queue_interrupt(); <request gets queued to interrupts list> |--wake_up_locked(&fiq->waitq); |--wait_event_freezable(); <as FR_FINISHED is set, it returns and then the caller frees this request> Now, the next fuse_dev_do_read(), see interrupts list is not empty and then calls fuse_read_interrupt() which tries to access the request which is already free'd and gets the below crash: [11432.401266] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b6b ... [11432.418518] Kernel BUG at ffffff80083720e0 [11432.456168] PC is at __list_del_entry+0x6c/0xc4 [11432.463573] LR is at fuse_dev_do_read+0x1ac/0x474 ... [11432.679999] [<ffffff80083720e0>] __list_del_entry+0x6c/0xc4 [11432.687794] [<ffffff80082c65e0>] fuse_dev_do_read+0x1ac/0x474 [11432.693180] [<ffffff80082c6b14>] fuse_dev_read+0x6c/0x78 [11432.699082] [<ffffff80081d5638>] __vfs_read+0xc0/0xe8 [11432.704459] [<ffffff80081d5efc>] vfs_read+0x90/0x108 [11432.709406] [<ffffff80081d67f0>] SyS_read+0x58/0x94 As FR_FINISHED bit is set before deleting the intr_entry with input queue lock in request completion path, do the testing of this flag and queueing atomically with the same lock in queue_interrupt(). Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: fd22d62ed0c3 ("fuse: no fc->lock for iqueue parts") Cc: <stable@vger.kernel.org> # 4.2+
2017-02-15ath9k: use correct OTP register offsets for the AR9340 and AR9550Christian Lamparter
This patch fixes the OTP register definitions for the AR934x and AR9550 WMAC SoC. Previously, the ath9k driver was unable to initialize the integrated WMAC on an Aerohive AP121: | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: Unable to initialize hardware; initialization status: -5 | ath9k ar934x_wmac: failed to initialize device | ath9k: probe of ar934x_wmac failed with error -5 It turns out that the AR9300_OTP_STATUS and AR9300_OTP_DATA definitions contain a typo. Cc: Gabor Juhos <juhosg@openwrt.org> Cc: stable@vger.kernel.org Fixes: add295a4afbdf5852d0 "ath9k: use correct OTP register offsets for AR9550" Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-15rt2500usb: don't mark register accesses as inlineArnd Bergmann
When CONFIG_KASAN is set, we get a rather large stack here: drivers/net/wireless/ralink/rt2x00/rt2500usb.c: In function 'rt2500usb_set_device_state': drivers/net/wireless/ralink/rt2x00/rt2500usb.c:1074:1: error: the frame size of 3032 bytes is larger than 100 bytes [-Werror=frame-larger-than=] If we don't force those functions to be inline, the compiler can figure this out better itself and not inline the functions when doing so would be harmful, reducing the stack size to a merge 256 bytes. Note that there is another problem that manifests in this driver, as a result of the typecheck() macro causing even larger stack frames. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15brcmfmac: Use net_device_stats from struct net_deviceTobias Klauser
Instead of using a private copy of struct net_device_stats in struct brcm_if, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: Fix if == else warnings in halbtc8723b1ant.cLarry Finger
The 0-DAY kernel test infrastructure reports the following: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c:1875:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c:2253:3-5: WARNING: possible condition with no effect (if == else) Reported-by: kbuild-all@01.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: Fix if == else warnings in halbtc8821a1ant.cLarry Finger
The 0-DAY kernel test infrastructure reports the following: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:1771:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:2126:3-5: WARNING: possible condition with no effect (if == else) Reported-by: kbuild-all@01.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: Fix if == else warnings in halbtc8821a2ant.cLarry Finger
The 0-DAY kernel test infrastructure reports the following: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3023:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3035:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3037:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3047:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3075:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3085:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3129:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3141:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3143:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3153:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3179:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3181:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3192:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2677:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2833:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2847:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2857:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2885:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2895:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2940:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2788:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2391:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2417:2-4: WARNING: possible condition with no effect (if == else) Reported-by: kbuild-all@01.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15mwifiex: don't enable/disable IRQ 0 during suspend/resumeBrian Norris
If we don't have an out-of-band wakeup IRQ configured through DT (as most platforms don't), then we fall out of this function with 'irq_wakeup == 0'. Other code (e.g., mwifiex_disable_wake() and mwifiex_enable_wake()) treats 'irq_wakeup >= 0' as a valid IRQ, and so we end up calling {enable,disable}_irq() on IRQ 0. That seems bad, so let's not do that. Same problem as fixed in this patch: https://patchwork.kernel.org/patch/9531693/ [PATCH v2 2/3] btmrvl: set irq_bt to -1 when failed to parse it with the difference that: (a) this one is actually a regression and (b) this affects both device tree and non-device-tree systems While fixing the regression, also drop the verbosity on the parse failure, so we don't see this when a DT node is present but doesn't have an interrupt property (this is perfectly legal): [ 21.999000] mwifiex_pcie 0000:01:00.0: fail to parse irq_wakeup from device tree Fixes: 853402a00823 ("mwifiex: Enable WoWLAN for both sdio and pcie") Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Rajat Jain <rajatja@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15orinoco: Use net_device_stats from struct net_deviceTobias Klauser
Instead of using a private copy of struct net_device_stats in struct orinoco_private, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: fix semicolon.cocci warningsJulia Lawall
Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15wlcore: disable multicast filter in AP modeIain Hunter
Enable AP support for allmulticast for MDNS. It can be enabled by bringing up the interface with ip command with argument allmulticast on Signed-off-by: Iain Hunter <i-hunter1@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15powerpc/mm/radix: Skip ptesync in pte update helpersAneesh Kumar K.V
We do them at the start of tlb flush, and we are sure a pte update will be followed by a tlbflush. Hence we can skip the ptesync in pte update helpers. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/mm/radix: Use ptep_get_and_clear_full when clearing pte for full mmAneesh Kumar K.V
This helps us to do some optimization for application exit case, where we can skip the DD1 style pte update sequence. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/mm/radix: Update pte update sequence for pte clear caseAneesh Kumar K.V
In the kernel we do follow the below sequence in different code paths. pte = ptep_get_clear(ptep) .... set_pte_at(ptep, pte) We do that for mremap, autonuma protection update and softdirty clearing. This implies our optimization to skip a tlb flush when clearing a pte update is not valid, because for DD1 system that followup set_pte_at will be done witout doing the required tlbflush. Fix that by always doing the dd1 style pte update irrespective of new_pte value. In a later patch we will optimize the application exit case. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/mm: Update PROTFAULT handling in the page fault pathAneesh Kumar K.V
With radix, we can get page fault with DSISR_PROTFAULT value set in case of PROT_NONE or autonuma mapping. The PROT_NONE case in handled by the vma check where we consider the access bad. For autonuma we should fall through and fixup the access mask correctly. Without this patch we trigger the WARN_ON() on radix. This code moves that WARN_ON() within a radix_enabled() check. I also moved the WARN_ON() outside the if condition making it apply for all type of faults (exec/write/read). It is also conditionalized for book3s, because BOOK3E can also get a PROTFAULT to handle the D/I cache sync. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/xmon: Fix data-breakpointRavi Bangoria
Currently xmon data-breakpoint feature is broken. Whenever there is a watchpoint match occurs, hw_breakpoint_handler will be called by do_break via notifier chains mechanism. If watchpoint is registered by xmon, hw_breakpoint_handler won't find any associated perf_event and returns immediately with NOTIFY_STOP. Similarly, do_break also returns without notifying to xmon. Solve this by returning NOTIFY_DONE when hw_breakpoint_handler does not find any perf_event associated with matched watchpoint, rather than NOTIFY_STOP, which tells the core code to continue calling the other breakpoint handlers including the xmon one. Cc: stable@vger.kernel.org Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/mm: Fix build break with BOOK3S_64=n and MEMORY_HOTPLUG=yMichael Ellerman
The recently merged HPT (Hash Page Table) resize support broke the build when BOOK3S_64=n (ie. 32-bit or 64-bit Book3E) and MEMORY_HOTPLUG=y: arch/powerpc/mm/mem.o: In function `.arch_add_memory': (.text+0x4e4): undefined reference to `.resize_hpt_for_hotplug' Fix it by adding a dummy version. Fixes: 438cc81a41e8 ("powerpc/pseries: Automatically resize HPT for memory hot add/remove") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15xfrm: Export xfrm_parse_spi.Steffen Klassert
We need it in the ESP offload handlers, so export it. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15net: Prepare gro for packet consuming gro callbacksSteffen Klassert
The upcomming IPsec ESP gro callbacks will consume the skb, so prepare for that. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15net: Add a skb_gro_flush_final helper.Steffen Klassert
Add a skb_gro_flush_final helper to prepare for consuming skbs in call_gro_receive. We will extend this helper to not touch the skb if the skb is consumed by a gro callback with a followup patch. We need this to handle the upcomming IPsec ESP callbacks as they reinject the skb to the napi_gro_receive asynchronous. The handler is used in all gro_receive functions that can call the ESP gro handlers. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15xfrm: Add a secpath_set helper.Steffen Klassert
Add a new helper to set the secpath to the skb. This avoids code duplication, as this is used in multiple places. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15ext4: fix fencepost in s_first_meta_bg validationTheodore Ts'o
It is OK for s_first_meta_bg to be equal to the number of block group descriptor blocks. (It rarely happens, but it shouldn't cause any problems.) https://bugzilla.kernel.org/show_bug.cgi?id=194567 Fixes: 3a4b77cd47bb837b8557595ec7425f281f2ca1fe Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2017-02-15crypto: brcm - Avoid double free in ahash_finup()Rob Rice
In Broadcom SPU driver, in case where incremental hash is done in software in ahash_finup(), tmpbuf was freed twice. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rob Rice <rob.rice@broadcom.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: cavium - fix Kconfig dependenciesArnd Bergmann
The driver fails to build if MSI support is disabled: In file included from /git/arm-soc/drivers/crypto/cavium/cpt/cptpf_main.c:18:0: drivers/crypto/cavium/cpt/cptpf.h:57:20: error: array type has incomplete element type 'struct msix_entry' struct msix_entry msix_entries[CPT_PF_MSIX_VECTORS]; ^~~~~~~~~~~~ drivers/crypto/cavium/cpt/cptpf_main.c: In function 'cpt_enable_msix': drivers/crypto/cavium/cpt/cptpf_main.c:344:8: error: implicit declaration of function 'pci_enable_msix';did you mean 'cpt_enable_msix'? [-Werror=implicit-function-declaration] On the other hand, it doesn't seem to have any build dependency on ARCH_THUNDER, so let's allow compile-testing to catch this kind of problem more easily. The 64-bit dependency is needed for the use of readq/writeq. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: cavium - cpt_bind_vq_to_grp could return an error codeGeorge Cherian
cpt_bind_vq_to_grp() could return an error code. However, it currently returns a u8. This produce the static checker warning. drivers/crypto/cavium/cpt/cptpf_mbox.c:70 cpt_bind_vq_to_grp() warn: signedness bug returning '(-22)' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: doc - fix typoGilad Ben-Yossef
Fix a single letter typo in api-skcipher.rst. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15hwrng: omap - update Kconfig help descriptionRussell King
omap-rng also supports Marvell Armada 7k/8k SoCs, but no mention of this is made in the help text, despite the dependency being added. Explicitly mention these SoCs in the help description so people know that it covers more than just TI SoCs. Fixes: 383212425c92 ("hwrng: omap - Add device variant for SafeXcel IP-76 found in Armada 8K") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: ccm - drop unnecessary minimum 32-bit alignmentArd Biesheuvel
The CCM driver forces 32-bit alignment even if the underlying ciphers don't care about alignment. This is because crypto_xor() used to require this, but since this is no longer the case, drop the hardcoded minimum of 32 bits. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: ccm - honour alignmask of subordinate MAC cipherArd Biesheuvel
The CCM driver was recently updated to defer the MAC part of the algorithm to a dedicated crypto transform, and a template for instantiating such transforms was added at the same time. However, this new cbcmac template fails to take the alignmask of the encapsulated cipher into account, which may result in buffer addresses being passed down that are not sufficiently aligned. So update the code to ensure that the digest buffer in the desc ctx appears at a sufficiently aligned offset, and tweak the code so that all calls to crypto_cipher_encrypt_one() operate on this buffer exclusively. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: caam - fix state buffer DMA (un)mappingHoria Geantă
If we register the DMA API debug notification chain to receive platform bus events: dma_debug_add_bus(&platform_bus_type); we start receiving warnings after a simple test like "modprobe caam_jr && modprobe caamhash && modprobe -r caamhash && modprobe -r caam_jr": platform ffe301000.jr: DMA-API: device driver has pending DMA allocations while released from device [count=1938] One of leaked entries details: [device address=0x0000000173fda090] [size=63 bytes] [mapped with DMA_TO_DEVICE] [mapped as single] It turns out there are several issues with handling buf_dma (mapping of buffer holding the previous chunk smaller than hash block size): -detection of buf_dma mapping failure occurs too late, after a job descriptor using that value has been submitted for execution -dma mapping leak - unmapping is not performed in all places: for e.g. in ahash_export or in most ahash_fin* callbacks (due to current back-to-back implementation of buf_dma unmapping/mapping) Fix these by: -calling dma_mapping_error() on buf_dma right after the mapping and providing an error code if needed -unmapping buf_dma during the "job done" (ahash_done_*) callbacks Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: caam - abstract ahash request double bufferingHoria Geantă
caamhash uses double buffering for holding previous/current and next chunks (data smaller than block size) to be hashed. Add (inline) functions to abstract this mechanism. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: caam - fix error path for ctx_dma mapping failureHoria Geantă
In case ctx_dma dma mapping fails, ahash_unmap_ctx() tries to dma unmap an invalid address: map_seq_out_ptr_ctx() / ctx_map_to_sec4_sg() -> goto unmap_ctx -> -> ahash_unmap_ctx() -> dma unmap ctx_dma There is also possible to reach ahash_unmap_ctx() with ctx_dma uninitialzed or to try to unmap the same address twice. Fix these by setting ctx_dma = 0 where needed: -initialize ctx_dma in ahash_init() -clear ctx_dma in case of mapping error (instead of holding the error code returned by the dma map function) -clear ctx_dma after each unmapping Fixes: 32686d34f8fb6 ("crypto: caam - ensure that we clean up after an error") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: caam - fix DMA API leaks for multiple setkey() callsHoria Geantă
setkey() callback may be invoked multiple times for the same tfm. In this case, DMA API leaks are caused by shared descriptors (and key for caamalg) being mapped several times and unmapped only once. Fix this by performing mapping / unmapping only in crypto algorithm's cra_init() / cra_exit() callbacks and sync_for_device in the setkey() tfm callback. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: caam - don't dma_map key for hash algorithmsHoria Geantă
Shared descriptors for hash algorithms are small enough for (split) keys to be inlined in all cases. Since driver already does this, all what's left is to remove unused ctx->key_dma. Fixes: 045e36780f115 ("crypto: caam - ahash hmac support") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: caam - use dma_map_sg() return codeHoria Geantă
dma_map_sg() might coalesce S/G entries, so use the number of S/G entries returned by it instead of what sg_nents_for_len() initially returns. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: caam - replace sg_count() with sg_nents_for_len()Horia Geantă
Replace internal sg_count() function and the convoluted logic around it with the standard sg_nents_for_len() function. src_nents, dst_nents now hold the number of SW S/G entries, instead of the HW S/G table entries. With this change, null (zero length) input data for AEAD case needs to be handled in a visible way. req->src is no longer (un)mapped, pointer address is set to 0 in SEQ IN PTR command. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: caam - check sg_count() return valueHoria Geantă
sg_count() internally calls sg_nents_for_len(), which could fail in case the required number of bytes is larger than the total bytes in the S/G. Thus, add checks to validate the input. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: caam - fix HW S/G in ablkcipher_giv_edesc_alloc()Horia Geantă
HW S/G generation does not work properly when the following conditions are met: -src == dst -src/dst is S/G -IV is right before (contiguous with) the first src/dst S/G entry since "iv_contig" is set to true (iv_contig is a misnomer here and it actually refers to the whole output being contiguous) Fix this by setting dst S/G nents equal to src S/G nents, instead of leaving it set to init value (0). Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: caam - fix JR IO mapping if one failsTudor Ambarus
If one of the JRs failed at init, the next JR used the failed JR's IO space. The patch fixes this bug. Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: caam - check return code of dma_set_mask_and_coherent()Horia Geantă
Setting the dma mask could fail, thus make sure it succeeds before going further. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: caam - don't include unneeded headersHoria Geantă
intern.h, jr.h are not needed in error.c error.h is not needed in ctrl.c Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: ccp - Simplify some buffer management routinesGary R Hook
The reverse-get/set functions can be simplified by eliminating unused code. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: ccp - Update the command queue on errorsGary R Hook
Move the command queue tail pointer when an error is detected. Always return the error. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-15crypto: ccp - Change mode for detailed CCP init messagesGary R Hook
The CCP initialization messages only need to be sent to syslog in debug mode. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2025-09-16 08:46:14 +0000