summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-07-14net: phy: micrel: Add ksz9131_resume()Biju Das
The Renesas RZ/G3E SMARC EVK uses KSZ9131RNXC phy. On deep power state, PHY loses the power and on wakeup the rgmii delays are not reconfigured causing it to fail. Replace the callback kszphy_resume()->ksz9131_resume() for reconfiguring the rgmii_delay when it exits from PM suspend state. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250711054029.48536-1-biju.das.jz@bp.renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-13tools: ynl: default to --process-unknown in installed modeJakub Kicinski
We default to raising an exception when unknown attrs are found to make sure those are noticed during development. When YNL CLI is "installed" and used by sysadmins erroring out is not going to be helpful. It's far more likely the user space is older than the kernel in that case, than that some attr is misdefined or missing. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-13net: dsa: mt7530: Constify struct regmap_configChristophe JAILLET
'struct regmap_config' are not modified in these drivers. They be statically defined instead of allocated and populated at run-time. The main benefits are: - it saves some memory at runtime - the structures can be declared as 'const', which is always better for structures that hold some function pointers - the code is less verbose Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-13tools: ynl: process unknown for enum valuesDonald Hunter
Extend the process_unknown handing to enum values and flags. Tested by removing entries from rt-link.yaml and rt-neigh.yaml: ./tools/net/ynl/pyynl/cli.py --family rt-link --dump getlink \ --process-unknown --output-json | jq '.[0] | ."ifi-flags"' [ "up", "Unknown(6)", "loopback", "Unknown(16)" ] ./tools/net/ynl/pyynl/cli.py --family rt-neigh --dump getneigh \ --process-unknown --output-json | jq '.[] | ."ndm-type"' "unicast" "Unknown(5)" "Unknown(5)" "unicast" "Unknown(5)" "unicast" "broadcast" Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-11Merge tag 'batadv-next-pullrequest-20250710' of ↵Jakub Kicinski
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - batman-adv: store hard_iface as iflink private data, by Matthias Schiffer * tag 'batadv-next-pullrequest-20250710' of git://git.open-mesh.org/linux-merge: batman-adv: store hard_iface as iflink private data batman-adv: Start new development cycle ==================== Link: https://patch.msgid.link/20250710164501.153872-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: cleanups and preparation for live migration Jake Keller says: Various cleanups and preparation to the ice driver code for supporting SR-IOV live migration. The logic for unpacking Rx queue context data is added. This is the inverse of the existing packing logic. Thanks to <linux/packing.h> this is trivial to add. Code to enable both reading and writing the Tx queue context for a queue over a shared hardware register interface is added. Thanks to ice_adapter, this is locked across all PFs that need to use it, preventing concurrency issues with multiple PFs. The RSS hash configuration requested by a VF is cached within the VF structure. This will be used to track and restore the same configuration during migration load. ice_sriov_set_msix_vec_count() is updated to use pci_iov_vf_id() instead of open-coding a worse equivalent, and checks to avoid rebuilding MSI-X if the current request is for the existing amount of vectors. A new ice_get_vf_by_dev() helper function is added to simplify accessing a VF from its PCI device structure. This will be used more heavily within the live migration code itself. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: introduce ice_get_vf_by_dev() wrapper ice: avoid rebuilding if MSI-X vector count is unchanged ice: use pci_iov_vf_id() to get VF ID ice: expose VF functions used by live migration ice: move ice_vsi_update_l2tsel to ice_lib.c ice: save RSS hash configuration for migration ice: add functions to get and set Tx queue context ice: add support for reading and unpacking Rx queue context ==================== Link: https://patch.msgid.link/20250710214518.1824208-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net: ll_temac: Fix incorrect PHY node reference in debug messageAlok Tiwari
In temac_probe(), the debug message intended to print the resolved PHY node was mistakenly using the controller node temac_np instead of the actual PHY node lp->phy_node. This patch corrects the log to reference the correct device tree node. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://patch.msgid.link/20250710183737.2385156-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11selftests/net: packetdrill: add --mss option to three testsEric Dumazet
Three tests are cooking GSO packets but do not provide gso_size information to the kernel, triggering this message: TCP: tun0: Driver has suspect GRO implementation, TCP performance may be compromised. Add --mss option to avoid this warning. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250710155641.3028726-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11Merge branch 'netdevsim-support-setting-a-permanent-address'Jakub Kicinski
Toke Høiland-Jørgensen says: ==================== netdevsim: support setting a permanent address Network management daemons that match on the device permanent address currently have no virtual interface types to test against. NetworkManager, in particular, has carried an out of tree patch to set the permanent address on netdevsim devices to use in its CI for this purpose. This series adds support to netdevsim to set a permanent address on port creation, and adds a test script to test setting and getting of the different L2 address types. v3: https://lore.kernel.org/20250706-netdevsim-perm_addr-v3-0-88123e2b2027@redhat.com v2: https://lore.kernel.org/20250702-netdevsim-perm_addr-v2-0-66359a6288f0@redhat.com v1: https://lore.kernel.org/20250203-netdevsim-perm_addr-v1-1-10084bc93044@redhat.com ==================== Link: https://patch.msgid.link/20250710-netdevsim-perm_addr-v4-0-c9db2fecf3bf@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11selftests: net: add netdev-l2addr.sh for testing L2 address functionalityToke Høiland-Jørgensen
Add a new test script to the network selftests which tests getting and setting of layer 2 addresses through netlink, including the newly added support for setting a permaddr on netdevsim devices. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20250710-netdevsim-perm_addr-v4-2-c9db2fecf3bf@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net: netdevsim: Support setting dev->perm_addr on port creationToke Høiland-Jørgensen
Network management daemons that match on the device permanent address currently have no virtual interface types to test against. NetworkManager, in particular, has carried an out of tree patch to set the permanent address on netdevsim devices to use in its CI for this purpose. To support this use case, support setting netdev->perm_addr when creating a netdevsim port. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20250710-netdevsim-perm_addr-v4-1-c9db2fecf3bf@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11selftests: flip local/remote endpoints in iou-zcrx.pyVishwanath Seshagiri
The iou-zcrx selftest currently runs the server on the remote host and the client on the local host. This commit flips the endpoints such that server runs on localhost and client on remote. This change brings the iou-zcrx selftest in convention with other selftests. Drive-by fix for a missing import exception that happens when the network interface has less than 2 combined channels. Test plan: ran iou-zcrx.py selftest between 2 physical machines Signed-off-by: Vishwanath Seshagiri <vishs@fb.com> Link: https://patch.msgid.link/20250710165337.614159-1-vishs@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11sfc: falcon: refactor and document ef4_ethtool_get_rxfh_fieldsEdward Cree
The code had some rather odd control flow inherited from when it was shared with siena and ef10 before this driver was split out. Simplify that for easier reading. Also add a comment explaining why we return the values we do, since some Falcon documents and datasheets confusingly mention the part supporting 4-tuple UDP hashing. (I couldn't find any record of exactly what was "broken" about the original Falcon A hash, I'm just trusting that falcon_init_rx_cfg() had a good reason for not using it.) Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20250710173213.1638397-1-edward.cree@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11Merge branch 'net_sched-act-extend-rcu-use-in-dump-methods'Jakub Kicinski
Eric Dumazet says: ==================== net_sched: act: extend RCU use in dump() methods We are trying to get away from central RTNL in favor of fine-grained mutexes. While looking at net/sched, I found that act already uses RCU in the fast path for the most cases, and could also be used in dump() methods. This series is not complete and will be followed by a second one. v1: https://lore.kernel.org/20250707130110.619822-1-edumazet@google.com ==================== Link: https://patch.msgid.link/20250709090204.797558-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net_sched: act_skbedit: use RCU in tcf_skbedit_dump()Eric Dumazet
Also storing tcf_action into struct tcf_skbedit_params makes sure there is no discrepancy in tcf_skbedit_act(). Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250709090204.797558-12-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net_sched: act_police: use RCU in tcf_police_dump()Eric Dumazet
Also storing tcf_action into struct tcf_police_params makes sure there is no discrepancy in tcf_police_act(). Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250709090204.797558-11-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net_sched: act_pedit: use RCU in tcf_pedit_dump()Eric Dumazet
Also storing tcf_action into struct tcf_pedit_params makes sure there is no discrepancy in tcf_pedit_act(). Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250709090204.797558-10-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net_sched: act_nat: use RCU in tcf_nat_dump()Eric Dumazet
Also storing tcf_action into struct tcf_nat_params makes sure there is no discrepancy in tcf_nat_act(). Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250709090204.797558-9-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net_sched: act_mpls: use RCU in tcf_mpls_dump()Eric Dumazet
Also storing tcf_action into struct tcf_mpls_params makes sure there is no discrepancy in tcf_mpls_act(). Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250709090204.797558-8-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net_sched: act_ctinfo: use RCU in tcf_ctinfo_dump()Eric Dumazet
Also storing tcf_action into struct tcf_ctinfo_params makes sure there is no discrepancy in tcf_ctinfo_act(). Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250709090204.797558-7-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net_sched: act_ctinfo: use atomic64_t for three countersEric Dumazet
Commit 21c167aa0ba9 ("net/sched: act_ctinfo: use percpu stats") missed that stats_dscp_set, stats_dscp_error and stats_cpmark_set might be written (and read) locklessly. Use atomic64_t for these three fields, I doubt act_ctinfo is used heavily on big SMP hosts anyway. Fixes: 24ec483cec98 ("net: sched: Introduce act_ctinfo action") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pedro Tammela <pctammela@mojatatu.com> Link: https://patch.msgid.link/20250709090204.797558-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net_sched: act_ct: use RCU in tcf_ct_dump()Eric Dumazet
Also storing tcf_action into struct tcf_ct_params makes sure there is no discrepancy in tcf_ct_act(). Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250709090204.797558-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net_sched: act_csum: use RCU in tcf_csum_dump()Eric Dumazet
Also storing tcf_action into struct tcf_csum_params makes sure there is no discrepancy in tcf_csum_act(). Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250709090204.797558-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net_sched: act_connmark: use RCU in tcf_connmark_dump()Eric Dumazet
Also storing tcf_action into struct tcf_connmark_parms makes sure there is no discrepancy in tcf_connmark_act(). Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250709090204.797558-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net_sched: act: annotate data-races in tcf_lastuse_update() and tcf_tm_dump()Eric Dumazet
tcf_tm_dump() reads fields that can be changed concurrently, and tcf_lastuse_update() might race against itself. Add READ_ONCE() and WRITE_ONCE() annotations. Fetch jiffies once in tcf_tm_dump(). Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250709090204.797558-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11eth: fbnic: fix ubsan complaints about OOB accessesJakub Kicinski
UBSAN complains that we reach beyond the end of the log entry: UBSAN: array-index-out-of-bounds in drivers/net/ethernet/meta/fbnic/fbnic_fw_log.c:94:50 index 71 is out of range for type 'char [*]' Call Trace: <TASK> ubsan_epilogue+0x5/0x2b fbnic_fw_log_write+0x120/0x960 fbnic_fw_parse_logs+0x161/0x210 We're just taking the address of the character after the array, so this really seems like something that should be legal. But whatever, easy enough to silence by doing direct pointer math. Fixes: c2b93d6beca8 ("eth: fbnic: Create ring buffer for firmware logs") Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250709205910.3107691-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11virtio_net: simplify tx queue wake condition checkLiming Wu
Consolidate the two nested if conditions for checking tx queue wake conditions into a single combined condition. This improves code readability without changing functionality. And move netif_tx_wake_queue into if condition to reduce unnecessary checks for queue stops. Signed-off-by: Liming Wu <liming.wu@jaguarmicro.com> Tested-by: Lei Yang <leiyang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250710023208.846-1-liming.wu@jaguarmicro.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11selftests/tc-testing: Add tests for restrictions on netem duplicationWilliam Liu
Ensure that a duplicating netem cannot exist in a tree with other netems in both qdisc addition and change. This is meant to prevent the soft lockup and OOM loop scenario discussed in [1]. Also adjust a HFSC's re-entrancy test case with netem for this new restriction - KASAN still triggers upon its failure. [1] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/ Signed-off-by: William Liu <will@willsroot.io> Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20250708164219.875521-1-will@willsroot.io Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net/sched: Restrict conditions for adding duplicating netems to qdisc treeWilliam Liu
netem_enqueue's duplication prevention logic breaks when a netem resides in a qdisc tree with other netems - this can lead to a soft lockup and OOM loop in netem_dequeue, as seen in [1]. Ensure that a duplicating netem cannot exist in a tree with other netems. Previous approaches suggested in discussions in chronological order: 1) Track duplication status or ttl in the sk_buff struct. Considered too specific a use case to extend such a struct, though this would be a resilient fix and address other previous and potential future DOS bugs like the one described in loopy fun [2]. 2) Restrict netem_enqueue recursion depth like in act_mirred with a per cpu variable. However, netem_dequeue can call enqueue on its child, and the depth restriction could be bypassed if the child is a netem. 3) Use the same approach as in 2, but add metadata in netem_skb_cb to handle the netem_dequeue case and track a packet's involvement in duplication. This is an overly complex approach, and Jamal notes that the skb cb can be overwritten to circumvent this safeguard. 4) Prevent the addition of a netem to a qdisc tree if its ancestral path contains a netem. However, filters and actions can cause a packet to change paths when re-enqueued to the root from netem duplication, leading us to the current solution: prevent a duplicating netem from inhabiting the same tree as other netems. [1] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/ [2] https://lwn.net/Articles/719297/ Fixes: 0afb51e72855 ("[PKT_SCHED]: netem: reinsert for duplication") Reported-by: William Liu <will@willsroot.io> Reported-by: Savino Dicanosa <savy@syst3mfailure.io> Signed-off-by: William Liu <will@willsroot.io> Signed-off-by: Savino Dicanosa <savy@syst3mfailure.io> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20250708164141.875402-1-will@willsroot.io Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2). No conflicts. Adjacent changes: drivers/net/wireless/mediatek/mt76/mt7925/mcu.c c701574c5412 ("wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan") b3a431fe2e39 ("wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()") drivers/net/wireless/mediatek/mt76/mt7996/mac.c 62da647a2b20 ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()") dc66a129adf1 ("wifi: mt76: add a wrapper for wcid access with validation") drivers/net/wireless/mediatek/mt76/mt7996/main.c 3dd6f67c669c ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()") 8989d8e90f5f ("wifi: mt76: mt7996: Do not set wcid.sta to 1 in mt7996_mac_sta_event()") net/mac80211/cfg.c 58fcb1b4287c ("wifi: mac80211: reject VHT opmode for unsupported channel widths") 037dc18ac3fb ("wifi: mac80211: add support for storing station S1G capabilities") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11Merge tag 'net-6.16-rc6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull more networking fixes from Jakub Kicinski "Big chunk of fixes for WiFi, Johannes says probably the last for the release. The Netlink fixes (on top of the tree) restore operation of iw (WiFi CLI) which uses sillily small recv buffer, and is the reason for this 'emergency PR'. The GRE multicast fix also stands out among the user-visible regressions. Current release - fix to a fix: - netlink: make sure we always allow at least one skb to be queued, even if the recvbuf is (mis)configured to be tiny Previous releases - regressions: - gre: fix IPv6 multicast route creation Previous releases - always broken: - wifi: prevent A-MSDU attacks in mesh networks - wifi: cfg80211: fix S1G beacon head validation and detection - wifi: mac80211: - always clear frame buffer to prevent stack leak in cases which hit a WARN() - fix monitor interface in device restart - wifi: mwifiex: discard erroneous disassoc frames on STA interface - wifi: mt76: - prevent null-deref in mt7925_sta_set_decap_offload() - add missing RCU annotations, and fix sleep in atomic - fix decapsulation offload - fixes for scanning - phy: microchip: improve link establishment and reset handling - eth: mlx5e: fix race between DIM disable and net_dim() - bnxt_en: correct DMA unmap len for XDP_REDIRECT" * tag 'net-6.16-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits) netlink: make sure we allow at least one dump skb netlink: Fix rmem check in netlink_broadcast_deliver(). bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT bnxt_en: Flush FW trace before copying to the coredump bnxt_en: Fix DCB ETS validation net: ll_temac: Fix missing tx_pending check in ethtools_set_ringparam() net/mlx5e: Add new prio for promiscuous mode net/mlx5e: Fix race between DIM disable and net_dim() net/mlx5: Reset bw_share field when changing a node's parent can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level selftests: net: lib: fix shift count out of range selftests: Add IPv6 multicast route generation tests for GRE devices. gre: Fix IPv6 multicast route creation. net: phy: microchip: limit 100M workaround to link-down events on LAN88xx net: phy: microchip: Use genphy_soft_reset() to purge stale LPA bits ibmvnic: Fix hardcoded NUM_RX_STATS/NUM_TX_STATS with dynamic sizeof net: appletalk: Fix device refcount leak in atrtr_create() netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto() wifi: mac80211: add the virtual monitor after reconfig complete wifi: mac80211: always initialize sdata::key_list ...
2025-07-11Merge tag 'gpio-fixes-for-v6.16-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix performance regression when setting values of multiple GPIO lines at once - make sure the GPIO OF xlate code doesn't end up passing an uninitialized local variable to GPIO core - update MAINTAINERS * tag 'gpio-fixes-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: MAINTAINERS: remove bouncing address for Nandor Han gpio: of: initialize local variable passed to the .of_xlate() callback gpiolib: fix performance regression when using gpio_chip_get_multiple()
2025-07-11selftests: drv-net: Add bpftool utilMohsin Bashir
Add bpf utility to simplify the use of bpftool for XDP tests included in this series. Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Link: https://patch.msgid.link/20250710184351.63797-2-mohsin.bashr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11Merge tag 'pm-6.16-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a coding mistake in a previous fix related to system suspend and hibernation merged recently" * tag 'pm-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: sleep: Call pm_restore_gfp_mask() after dpm_resume()
2025-07-11Merge tag 'dma-mapping-6.16-2025-07-11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux Pull dma-mapping fix from Marek Szyprowski: - small fix relevant to arm64 server and custom CMA configuration (Feng Tang) * tag 'dma-mapping-6.16-2025-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: dma-contiguous: hornor the cma address limit setup by user
2025-07-11netlink: make sure we allow at least one dump skbJakub Kicinski
Commit under Fixes tightened up the memory accounting for Netlink sockets. Looks like the accounting is too strict for some existing use cases, Marek reported issues with nl80211 / WiFi iw CLI. To reduce number of iterations Netlink dumps try to allocate messages based on the size of the buffer passed to previous recvmsg() calls. If user space uses a larger buffer in recvmsg() than sk_rcvbuf we will allocate an skb we won't be able to queue. Make sure we always allow at least one skb to be queued. Same workaround is already present in netlink_attachskb(). Alternative would be to cap the allocation size to rcvbuf - rmem_alloc but as I said, the workaround is already present in other places. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/9794af18-4905-46c6-b12c-365ea2f05858@samsung.com Fixes: ae8f160e7eb2 ("netlink: Fix wraparounds of sk->sk_rmem_alloc.") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711001121.3649033-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11netlink: Fix rmem check in netlink_broadcast_deliver().Kuniyuki Iwashima
We need to allow queuing at least one skb even when skb is larger than sk->sk_rcvbuf. The cited commit made a mistake while converting a condition in netlink_broadcast_deliver(). Let's correct the rmem check for the allow-one-skb rule. Fixes: ae8f160e7eb24 ("netlink: Fix wraparounds of sk->sk_rmem_alloc.") Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711053208.2965945-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11Merge branch 'bnxt_en-3-bug-fixes'Jakub Kicinski
Michael Chan says: ==================== bnxt_en: 3 bug fixes The first one fixes a possible failure when setting DCB ETS. The second one fixes the ethtool coredump (-W 2) not containing all the FW traces. The third one fixes the DMA unmap length when transmitting XDP_REDIRECT packets. ==================== Link: https://patch.msgid.link/20250710213938.1959625-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11bnxt_en: Set DMA unmap len correctly for XDP_REDIRECTSomnath Kotur
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set() with the proper length instead of 0. This bug triggers this warning on a system with IOMMU enabled: WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170 RIP: 0010:__iommu_dma_unmap+0x159/0x170 Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45 b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00 RSP: 0018:ff22d31181150c88 EFLAGS: 00010206 RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000 R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000 R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00 FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0 PKRU: 55555554 Call Trace: <IRQ> ? show_regs+0x6d/0x80 ? __warn+0x89/0x160 ? __iommu_dma_unmap+0x159/0x170 ? report_bug+0x17e/0x1b0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x18/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? __iommu_dma_unmap+0x159/0x170 ? __iommu_dma_unmap+0xb3/0x170 iommu_dma_unmap_page+0x4f/0x100 dma_unmap_page_attrs+0x52/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? xdp_return_frame+0x2e/0xd0 bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en] __bnxt_poll_work_done+0x81/0x1e0 [bnxt_en] bnxt_poll+0xd3/0x1e0 [bnxt_en] Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11bnxt_en: Flush FW trace before copying to the coredumpShruti Parab
bnxt_fill_drv_seg_record() calls bnxt_dbg_hwrm_log_buffer_flush() to flush the FW trace buffer. This needs to be done before we call bnxt_copy_ctx_mem() to copy the trace data. Without this fix, the coredump may not contain all the FW traces. Fixes: 3c2179e66355 ("bnxt_en: Add FW trace coredump segments to the coredump") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11bnxt_en: Fix DCB ETS validationShravya KN
In bnxt_ets_validate(), the code incorrectly loops over all possible traffic classes to check and add the ETS settings. Fix it to loop over the configured traffic classes only. The unconfigured traffic classes will default to TSA_ETS with 0 bandwidth. Looping over these unconfigured traffic classes may cause the validation to fail and trigger this error message: "rejecting ETS config starving a TC\n" The .ieee_setets() will then fail. Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.") Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net: ll_temac: Fix missing tx_pending check in ethtools_set_ringparam()Alok Tiwari
The function ll_temac_ethtools_set_ringparam() incorrectly checked rx_pending twice, once correctly for RX and once mistakenly in place of tx_pending. This caused tx_pending to be left unchecked against TX_BD_NUM_MAX. As a result, invalid TX ring sizes may have been accepted or valid ones wrongly rejected based on the RX limit, leading to potential misconfiguration or unexpected results. This patch corrects the condition to properly validate tx_pending. Fixes: f7b261bfc35e ("net: ll_temac: Make RX/TX ring sizes configurable") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://patch.msgid.link/20250710180621.2383000-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11Merge branch 'mlx5-misc-fixes-2025-07-10'Jakub Kicinski
Tariq Toukan says: ==================== mlx5 misc fixes 2025-07-10 This small patchset provides misc bug fixes from the team to the mlx5 core and EN drivers. ==================== Link: https://patch.msgid.link/1752155624-24095-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net/mlx5e: Add new prio for promiscuous modeJianbo Liu
An optimization for promiscuous mode adds a high-priority steering table with a single catch-all rule to steer all traffic directly to the TTC table. However, a gap exists between the creation of this table and the insertion of the catch-all rule. Packets arriving in this brief window would miss as no rule was inserted yet, unnecessarily incrementing the 'rx_steer_missed_packets' counter and dropped. This patch resolves the issue by introducing a new prio for this table, placing it between MLX5E_TC_PRIO and MLX5E_NIC_PRIO. By doing so, packets arriving during the window now fall through to the next prio (at MLX5E_NIC_PRIO) instead of being dropped. Fixes: 1c46d7409f30 ("net/mlx5e: Optimize promiscuous mode") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/1752155624-24095-4-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net/mlx5e: Fix race between DIM disable and net_dim()Carolina Jubran
There's a race between disabling DIM and NAPI callbacks using the dim pointer on the RQ or SQ. If NAPI checks the DIM state bit and sees it still set, it assumes `rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after that check, the pointer might already be set to NULL, leading to a NULL pointer dereference in net_dim(). Fix this by calling `synchronize_net()` before freeing the DIM context. This ensures all in-progress NAPI callbacks are finished before the pointer is cleared. Kernel log: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:net_dim+0x23/0x190 ... Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? common_interrupt+0xf/0xa0 ? sysvec_call_function_single+0xb/0x90 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? net_dim+0x23/0x190 ? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core] ? sysvec_apic_timer_interrupt+0xb/0x90 mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core] mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core] ? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core] busy_poll_stop+0xa2/0x200 ? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core] ? mlx5e_trigger_irq+0x130/0x130 [mlx5_core] __napi_busy_loop+0x345/0x3b0 ? sysvec_call_function_single+0xb/0x90 ? asm_sysvec_call_function_single+0x16/0x20 ? sysvec_apic_timer_interrupt+0xb/0x90 ? pcpu_free_area+0x1e4/0x2e0 napi_busy_loop+0x11/0x20 xsk_recvmsg+0x10c/0x130 sock_recvmsg+0x44/0x70 __sys_recvfrom+0xbc/0x130 ? __schedule+0x398/0x890 __x64_sys_recvfrom+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ... ---[ end trace 0000000000000000 ]--- ... ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 445a25f6e1a2 ("net/mlx5e: Support updating coalescing configuration without resetting channels") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/1752155624-24095-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net/mlx5: Reset bw_share field when changing a node's parentCarolina Jubran
When changing a node's parent, its scheduling element is destroyed and re-created with bw_share 0. However, the node's bw_share field was not updated accordingly. Set the node's bw_share to 0 after re-creation to keep the software state in sync with the firmware configuration. Fixes: 9c7bbf4c3304 ("net/mlx5: Add support for setting parent of nodes") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/1752155624-24095-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11Merge tag 'linux-can-fixes-for-6.16-20250711' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2025-07-11 Sean Nyekjaer's patch targets the m_can driver and demotes the "msg lost in rx" message to debug level to prevent flooding the kernel log with error messages. * tag 'linux-can-fixes-for-6.16-20250711' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level ==================== Link: https://patch.msgid.link/20250711102451.2828802-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11Merge branch 'hv-msi-parent-domain' into mainDavid S. Miller
Nam Cao says: ==================== Subject: [PATCH for-netdev v2 0/2] PCI: hv: MSI parent domain conversion This series originally belongs to a bigger series sent to PCI tree: https://lore.kernel.org/linux-pci/024f0122314198fe0a42fef01af53e8953a687ec.1750858083.git.namcao@linutronix.de/ However, during review, we noticed that the patch conflicts with another patch in netdev tree: https://lore.kernel.org/netdev/1749651015-9668-1-git-send-email-shradhagupta@linux.microsoft.com/ As this series has no dependency with the rest of the series, we think it is best to split out this one and send it to netdev, to avoid conflict resolution headache later on. Can netdev maintainers please pick it up? ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-11PCI: hv: Switch to msi_create_parent_irq_domain()Nam Cao
Move away from the legacy MSI domain setup, switch to use msi_create_parent_irq_domain(). While doing the conversion, I noticed that hv_compose_msi_msg() is doing more than it is supposed to (composing message). This function also allocates and populates struct tran_int_desc, which should be done in hv_pcie_domain_alloc() instead. It works, but it is not the correct design. However, I have no hardware to test such change, therefore I leave a TODO note. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-11irqdomain: Export irq_domain_free_irqs_top()Nam Cao
Export irq_domain_free_irqs_top(), making it usable for drivers compiled as modules. Reviewed-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>