| Age | Commit message (Collapse) | Author |
|---|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A set of loosely connected changes, fixing few outstanding issues as
well as improving readability of the existing code.
The fixes lead the series, first five patches. The goal is to make sure
proper read() is used when accessing the registers, probe() and remove()
sequences for HDAudio streaming are synced, minimal AudioDSP firmware
version points to correct values and recent additions to the topology
are parsed properly.
The only patch that points to 'new functionality' is:
ASoC: Intel: avs: Update ASRC definition
as with the struct definition updates, one can utilize the ASRC module
in both streaming directions now (previously limited to Capture).
Everything else either improves the logging or provides comments vital
for long-term maintenance of the code.
|
|
parisc uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-10-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
alpha uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-9-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the generic scripts to generate headers from the syscall table for
both 32- and 64-bit x86.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-8-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
xtensa uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-7-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
sparc uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-6-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
sh uses a syscall table, use that in perf instead of requiring libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-5-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
arm uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-4-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
csky uses the generic syscall table, use that in perf instead of
requiring libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-3-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Arc uses the generic syscall table, use that in perf instead of
requiring libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-2-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently each architecture in perf independently generates syscall
headers.
Adapt the work that has gone into unifying syscall header
implementations in the kernel to work with perf tools.
Introduce this framework with riscv at first. riscv previously relied on
libaudit, but with this change, perf tools for riscv no longer needs
this external dependency.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-1-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On the Dell Precision M6800/OXD1M5, BIOS A26 06/13/2029, Linux prints the
warning below.
i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration
Following the same suggestions by Wolfram Sang as for the Dell Precision
3540 [1], the accelerometer can be successfully found on I2C bus 0 at
address 0x29.
$ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-0/new_device
lis3lv02d 0x29
$ dmesg | tail -5
[1185.385204] lis3lv02d_i2c 0-0029: supply Vdd not found, using dummy regulator
[1185.385235] lis3lv02d_i2c 0-0029: supply Vdd_IO not found, using dummy regulator
[1185.399689] lis3lv02d: 8 bits 3DC sensor found
[1185.449391] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input371
[1185.449577] i2c i2c-0: new_device: Instantiated device lis3lv02d at 0x29
So, the device has that accelerometer. Add the I2C address to the
mapping list, and test it successfully on the device.
[1]: https://lore.kernel.org/linux-i2c/97708c11-ac85-fb62-2c8e-d37739ca826f@molgen.mpg.de/
Signed-off-by: Patrick Höhn <hoehnp@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240312193132.26518-1-hoehnp@gmx.de
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Since the changes in
commit f748a07a0b64 ("PCI: Remove legacy pcim_release()")
all pcim_enable_device() does is set up a callback that disables the
device from being disabled from driver detach. The function
pcim_pin_device() prevents said disabling. pcim_enable_device(),
therefore, sets up an action that is removed immediately afterwards by
pcim_pin_device().
Replace pcim_enable_device() with pci_enable_device() and remove the
unnecessary call to pcim_pin_device().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lore.kernel.org/r/20241121195624.144839-2-pstanner@redhat.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The RK3588 EVB1 has an onboard AP6275P WLAN/BT module. This adds
support for the WLAN side, which is connected to the second
PCIe bus. The Bluetooth side is connected to UART and handled
separately.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241210162452.116767-1-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Ethernet phys normally need a 25MHz refclk input. On a lot of boards
this is done with a dedicated 25MHz crystal. But the rk3588 CRU also
provides a means for that via the refclko25m_ethX clock outputs that
can be used for that function.
The mdio bus normally probes devices on the bus at runtime, by reading
specific phy registers. This requires the phy to be running and thus
also being supplied by its reference clock.
While there exist the possibility and dt-binding to declare these
input clocks for each phy in the phy-dt-node, this is only relevant
_after_ the phy has been detected and during the drivers probe-run.
This results in a chicken-and-egg-problem. The refclks in the CRU are
running on boot of course, but phy-probing can very well happen after
clk_disable_unused has run.
In the past I tried to make clock-handling part of the mdio bus code [0]
but that wasn't very well received, due to it being specific to OF and
clocks with the consensus being that resources needed for detection
need to be enabled before.
So to make probing ethernet phys using the internal refclks possible,
make those 2 clocks critical.
[0] https://lore.kernel.org/netdev/13590315.F0gNSz5aLb@diego/T/
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Link: https://lore.kernel.org/r/20241214224820.200665-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Christoph Hellwig <hch@lst.de> says:
File systems that write out of place usually require different alignment
for direct I/O writes than what they can do for reads. This series tries
to address this by adding yet another statx field.
* patches from https://lore.kernel.org/r/20250109083109.1441561-1-hch@lst.de:
xfs: report larger dio alignment for COW inodes
xfs: report the correct read/write dio alignment for reflinked inodes
xfs: cleanup xfs_vn_getattr
fs: add STATX_DIO_READ_ALIGN
fs: reformat the statx definition
Link: https://lore.kernel.org/r/20250109083109.1441561-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
For I/O to reflinked blocks we always need to write an entire new file
system block, and the code enforces the file system block alignment for
the entire file if it has any reflinked blocks. Mirror the larger
value reported in the statx in the dio_offset_align in the xfs-specific
XFS_IOC_DIOINFO ioctl for the same reason.
Don't bother adding a new field for the read alignment to this legacy
ioctl as all new users should use statx instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-6-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
For I/O to reflinked blocks we always need to write an entire new
file system block, and the code enforces the file system block alignment
for the entire file if it has any reflinked blocks.
Use the new STATX_DIO_READ_ALIGN flag to report the asymmetric read
vs write alignments for reflinked files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-5-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Split the two bits of optional statx reporting into their own helpers
so that they are self-contained instead of deeply indented in the main
getattr handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-4-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a separate dio read align field, as many out of place write
file systems can easily do reads aligned to the device sector size,
but require bigger alignment for writes.
This is usually papered over by falling back to buffered I/O for smaller
writes and doing read-modify-write cycles, but performance for this
sucks, so applications benefit from knowing the actual write alignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-3-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The comments after the declaration are becoming rather unreadable with
long enough comments. Move them into lines of their own.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-2-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There is a race condition at startup between disabling power domains not
used and disabling clocks not used on the rk3328. When the clocks are
disabled first, the hevc power domain fails to shut off leading to a
splat of failures. Add the hevc core clock to the rk3328 power domain
node to prevent this condition.
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 3-.... }
1087 jiffies s: 89 root: 0x8/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 0 to CPUs 3:
NMI backtrace for cpu 3
CPU: 3 UID: 0 PID: 86 Comm: kworker/3:3 Not tainted 6.12.0-rc5+ #53
Hardware name: Firefly ROC-RK3328-CC (DT)
Workqueue: pm genpd_power_off_work_fn
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : regmap_unlock_spinlock+0x18/0x30
lr : regmap_read+0x60/0x88
sp : ffff800081123c00
x29: ffff800081123c00 x28: ffff2fa4c62cad80 x27: 0000000000000000
x26: ffffd74e6e660eb8 x25: ffff2fa4c62cae00 x24: 0000000000000040
x23: ffffd74e6d2f3ab8 x22: 0000000000000001 x21: ffff800081123c74
x20: 0000000000000000 x19: ffff2fa4c0412000 x18: 0000000000000000
x17: 77202c31203d2065 x16: 6c6469203a72656c x15: 6c6f72746e6f632d
x14: 7265776f703a6e6f x13: 2063766568206e69 x12: 616d6f64202c3431
x11: 347830206f742030 x10: 3430303034783020 x9 : ffffd74e6c7369e0
x8 : 3030316666206e69 x7 : 205d383738353733 x6 : 332e31202020205b
x5 : ffffd74e6c73fc88 x4 : ffffd74e6c73fcd4 x3 : ffffd74e6c740b40
x2 : ffff800080015484 x1 : 0000000000000000 x0 : ffff2fa4c0412000
Call trace:
regmap_unlock_spinlock+0x18/0x30
rockchip_pmu_set_idle_request+0xac/0x2c0
rockchip_pd_power+0x144/0x5f8
rockchip_pd_power_off+0x1c/0x30
_genpd_power_off+0x9c/0x180
genpd_power_off.part.0.isra.0+0x130/0x2a8
genpd_power_off_work_fn+0x6c/0x98
process_one_work+0x170/0x3f0
worker_thread+0x290/0x4a8
kthread+0xec/0xf8
ret_from_fork+0x10/0x20
rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'hevc', val=0x88220
Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20241214224339.24674-1-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
During mass manufacturing, we noticed the mmc_rx_crc_error counter,
as reported by "ethtool -S eth0 | grep mmc_rx_crc_error", to increase
above zero during nuttcp speedtests. Most of the time, this did not
affect the achieved speed, but it prompted this investigation.
Cycling through the rx_delay range on six boards (see table below) of
various ages shows that there is a large good region from 0x12 to 0x35
where we see zero crc errors on all tested boards.
The old rx_delay value (0x10) seems to have always been on the edge for
the KSZ9031RNX that is usually placed on Puma.
Choose "rx_delay = 0x23" to put us smack in the middle of the good
region. This works fine as well with the KSZ9131RNX PHY that was used
for a small number of boards during the COVID chip shortages.
Board S/N PHY rx_delay good region
--------- --- --------------------
Puma TT0069903 KSZ9031RNX 0x11 0x35
Puma TT0157733 KSZ9031RNX 0x11 0x35
Puma TT0681551 KSZ9031RNX 0x12 0x37
Puma TT0681156 KSZ9031RNX 0x10 0x38
Puma 17496030079 KSZ9031RNX 0x10 0x37 (Puma v1.2 from 2017)
Puma TT0681720 KSZ9131RNX 0x02 0x39 (alternative PHY used in very few boards)
Intersection of good regions = 0x12 0x35
Middle of good region = 0x23
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Cc: stable@vger.kernel.org
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # Puma v2.1 and v2.3 with KSZ9031
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
Link: https://lore.kernel.org/r/20241213-puma_rx_delay-v4-1-8e8e11cc6ed7@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Since the commit 8a469ee35606 ("arm64: dts: rockchip: Add txpbl node for
RK3399/RK3328"), having "snps,txpbl" properties defined as Ethernet stability
fixes in RK3328-based board dts(i) files is redundant, because that commit
added the required fix to the RK3328 SoC dtsi, so let's delete them.
It has been determined that the Ethernet stability fixes no longer require
"snps,rxpbl", "snps,aal" and "snps,force_thresh_dma_mode" properties, [1][2]
out of which the last two also induce performance penalties, so let's delete
these properties from the relevant RK3328-based board dts(i) files.
This commit completes the removal of these redundant "snps,*" DT properties
that was started by a patch from Peter Geis. [3]
[1] https://lore.kernel.org/linux-rockchip/CAMdYzYpj3d7Rq0O0QjV4r6HEf_e07R0QAhPT2NheZdQV3TnQ6g@mail.gmail.com/
[2] https://lore.kernel.org/linux-rockchip/CAMdYzYpnx=pHJ+oqshgfZFp=Mfqp3TcMmEForqJ+s9KuhkgnqA@mail.gmail.com/
[3] https://lore.kernel.org/linux-rockchip/20241210013010.81257-7-pgwipeout@gmail.com/
Cc: Peter Geis <pgwipeout@gmail.com>
Acked-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/fe05ecccc9fe27a678ad3e700ea022429f659724.1733943615.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
With the proper GATE_LINK support, we no longer need to keep the
linked clocks always on. Thus it's time to drop the CLK_IS_CRITICAL
flag for them.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241211165957.94922-6-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Recent Rockchip SoCs have a new hardware block called Native Interface
Unit (NIU), which gates clocks to devices behind them. These clock
gates will only have a running output clock when all of the following
conditions are met:
1. the parent clock is enabled
2. the enable bit is set correctly
3. the linked clock is enabled
To handle them this code registers them as a normal gate type clock,
which takes care of condition 1 + 2. The linked clock is handled by
using runtime PM clocks. Handling it via runtime PM requires setting
up a struct device for each of these clocks with a driver attached
to use the correct runtime PM operations. Thus the complete handling
of these clocks has been moved into its own driver.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241211165957.94922-5-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Move rockchip_clk_add_lookup to clk.h, so that it can be used
by sub-devices with their own driver. These might also have to
do a lookup, so rename the function to rockchip_clk_set_lookup
and add a matching rockchip_clk_get_lookup.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241211165957.94922-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The proper GATE_LINK implementation will use runtime PM to handle the
linked gate clocks, which requires device context. Currently all clocks
are registered early via CLK_OF_DECLARE, which is before the kernel
knows about devices.
Moving the full clocks registration to the probe routine does not work,
since the clocks needed for timers must be registered early.
To work around this issue, most of the clock tree is registered early,
but GATE_LINK clocks are handled in the probe routine. Since the resets
are not needed early either, they have also been moved to the probe
routine.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241211165957.94922-3-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
When some clocks are registered late and some clocks are registered
early we need to make sure the late registered clocks report probe defer
until the final registration has happened.
But we do not want to keep reporting probe defer after the late
registration has happened. Also not all Rockchip SoCs have late
registered clocks and may not need to report probe defer at all.
This restructures code a bit, so that there is a new function
rockchip_clk_init_early(), which should be used for initializing the CRU
structure on SoCs making use of late initialization in addition to the
early init. These platforms should call rockchip_clk_finalize()
once all clocks have been registered.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[added EXPORT_SYMBOL_GPL(rockchip_clk_finalize) to match the early function]
Link: https://lore.kernel.org/r/20241211165957.94922-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
on 32-bit kernels, iomap_write_delalloc_scan() was inadvertently using a
32-bit position due to folio_next_index() returning an unsigned long.
This could lead to an infinite loop when writing to an xfs filesystem.
Signed-off-by: Marco Nelissen <marco.nelissen@gmail.com>
Link: https://lore.kernel.org/r/20250109041253.2494374-1-marco.nelissen@gmail.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Jakub Kicinski says:
====================
net: make sure we retain NAPI ordering on netdev->napi_list
I promised Eric to remove the rtnl protection of the NAPI list,
when I sat down to implement it over the break I realized that
the recently added NAPI ID retention will break the list ordering
assumption we have in netlink dump. The ordering used to happen
"naturally", because we'd always add NAPIs that the head of the
list, and assign a new monotonically increasing ID.
Before the first patch of this series we'd still only add at
the head of the list but now the newly added NAPI may inherit
from its config an ID lower than something else already on the list.
The fix is in the first patch, the rest is netdevsim churn to test it.
I'm posting this for net-next, because AFAICT the problem can't
be triggered in net, given the very limited queue API adoption.
v2:
- [patch 2] allocate the array with kcalloc() instead of kvcalloc()
- [patch 2] set GFP_KERNEL_ACCOUNT when allocating queues
- [patch 6] don't null-check page pool before page_pool_destroy()
- [patch 6] controled -> controlled
- [patch 7] change mode to 0200
- [patch 7] reorder removal to be inverse of add
- [patch 7] fix the spaces vs tabs
v1: https://lore.kernel.org/20250103185954.1236510-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250107160846.2223263-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Test listing netdevsim NAPIs before and after a single queue
has been reset (and NAPIs re-added).
Start from resetting the middle queue because edge cases
(first / last) may actually be less likely to trigger bugs.
# ./tools/testing/selftests/net/nl_netdev.py
KTAP version 1
1..4
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Support triggering queue reset via debugfs for an upcoming test.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add queue management API support. We need a way to reset queues
to test NAPI reordering, the queue management API provides a
handy scaffolding for that.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We'll need the code to allocate and free queues in the queue management
API, factor it out.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make nsim->rqs an array of pointers and allocate them individually
so that we can swap them out one by one.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Link the NAPI instances to their configs. This will be needed to test
that NAPI config doesn't break list ordering.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Linus suggested during one of past maintainer summits (in context of
a DMA_BUF discussion) that symbol namespaces can be used to prevent
unwelcome but in-tree code from using all exported functions.
Create a namespace for netdev.
Export netdev_rx_queue_restart(), drivers may want to use it since
it gives them a simple and safe way to restart a queue to apply
config changes. But it's both too low level and too actively developed
to be used outside netdev.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Netlink code depends on NAPI instances being sorted by ID on
the netdev list for dump continuation. We need to be able to
find the position on the list where we left off if dump does
not fit in a single skb, and in the meantime NAPI instances
can come and go.
This was trivially true when we were assigning a new ID to every
new NAPI instance. Since we added the NAPI config API, we try
to retain the ID previously used for the same queue, but still
add the new NAPI instance at the start of the list.
This is fine if we reset the entire netdev and all NAPIs get
removed and added back. If driver replaces a NAPI instance
during an operation like DEVMEM queue reset, or recreates
a subset of NAPI instances in other ways we may end up with
broken ordering, and therefore Netlink dumps with either
missing or duplicated entries.
At this stage the problem is theoretical. Only two drivers
support queue API, bnxt and gve. gve recreates NAPIs during
queue reset, but it doesn't support NAPI config.
bnxt supports NAPI config but doesn't recreate instances
during reset.
We need to save the ID in the config as soon as it is assigned
because otherwise the new NAPI will not know what ID it will
get at enable time, at the time it is being added.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
io_eventfd_do_signal() is invoked from an RCU callback, but when
dropping the reference to the io_ev_fd, it calls io_eventfd_free()
directly if the refcount drops to zero. This isn't correct, as any
potential freeing of the io_ev_fd should be deferred another RCU grace
period.
Just call io_eventfd_put() rather than open-code the dec-and-test and
free, which will correctly defer it another RCU grace period.
Fixes: 21a091b970cd ("io_uring: signal registered eventfd to process deferred task work")
Reported-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org
Tested-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Li Zetao<lizetao1@huawei.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Our syzkaller report a following UAF for v6.6:
BUG: KASAN: slab-use-after-free in bfq_init_rq+0x175d/0x17a0 block/bfq-iosched.c:6958
Read of size 8 at addr ffff8881b57147d8 by task fsstress/232726
CPU: 2 PID: 232726 Comm: fsstress Not tainted 6.6.0-g3629d1885222 #39
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106
print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364
print_report+0x3e/0x70 mm/kasan/report.c:475
kasan_report+0xb8/0xf0 mm/kasan/report.c:588
hlist_add_head include/linux/list.h:1023 [inline]
bfq_init_rq+0x175d/0x17a0 block/bfq-iosched.c:6958
bfq_insert_request.isra.0+0xe8/0xa20 block/bfq-iosched.c:6271
bfq_insert_requests+0x27f/0x390 block/bfq-iosched.c:6323
blk_mq_insert_request+0x290/0x8f0 block/blk-mq.c:2660
blk_mq_submit_bio+0x1021/0x15e0 block/blk-mq.c:3143
__submit_bio+0xa0/0x6b0 block/blk-core.c:639
__submit_bio_noacct_mq block/blk-core.c:718 [inline]
submit_bio_noacct_nocheck+0x5b7/0x810 block/blk-core.c:747
submit_bio_noacct+0xca0/0x1990 block/blk-core.c:847
__ext4_read_bh fs/ext4/super.c:205 [inline]
ext4_read_bh+0x15e/0x2e0 fs/ext4/super.c:230
__read_extent_tree_block+0x304/0x6f0 fs/ext4/extents.c:567
ext4_find_extent+0x479/0xd20 fs/ext4/extents.c:947
ext4_ext_map_blocks+0x1a3/0x2680 fs/ext4/extents.c:4182
ext4_map_blocks+0x929/0x15a0 fs/ext4/inode.c:660
ext4_iomap_begin_report+0x298/0x480 fs/ext4/inode.c:3569
iomap_iter+0x3dd/0x1010 fs/iomap/iter.c:91
iomap_fiemap+0x1f4/0x360 fs/iomap/fiemap.c:80
ext4_fiemap+0x181/0x210 fs/ext4/extents.c:5051
ioctl_fiemap.isra.0+0x1b4/0x290 fs/ioctl.c:220
do_vfs_ioctl+0x31c/0x11a0 fs/ioctl.c:811
__do_sys_ioctl fs/ioctl.c:869 [inline]
__se_sys_ioctl+0xae/0x190 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x78/0xe2
Allocated by task 232719:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:768 [inline]
slab_alloc_node mm/slub.c:3492 [inline]
kmem_cache_alloc_node+0x1b8/0x6f0 mm/slub.c:3537
bfq_get_queue+0x215/0x1f00 block/bfq-iosched.c:5869
bfq_get_bfqq_handle_split+0x167/0x5f0 block/bfq-iosched.c:6776
bfq_init_rq+0x13a4/0x17a0 block/bfq-iosched.c:6938
bfq_insert_request.isra.0+0xe8/0xa20 block/bfq-iosched.c:6271
bfq_insert_requests+0x27f/0x390 block/bfq-iosched.c:6323
blk_mq_insert_request+0x290/0x8f0 block/blk-mq.c:2660
blk_mq_submit_bio+0x1021/0x15e0 block/blk-mq.c:3143
__submit_bio+0xa0/0x6b0 block/blk-core.c:639
__submit_bio_noacct_mq block/blk-core.c:718 [inline]
submit_bio_noacct_nocheck+0x5b7/0x810 block/blk-core.c:747
submit_bio_noacct+0xca0/0x1990 block/blk-core.c:847
__ext4_read_bh fs/ext4/super.c:205 [inline]
ext4_read_bh_nowait+0x15a/0x240 fs/ext4/super.c:217
ext4_read_bh_lock+0xac/0xd0 fs/ext4/super.c:242
ext4_bread_batch+0x268/0x500 fs/ext4/inode.c:958
__ext4_find_entry+0x448/0x10f0 fs/ext4/namei.c:1671
ext4_lookup_entry fs/ext4/namei.c:1774 [inline]
ext4_lookup.part.0+0x359/0x6f0 fs/ext4/namei.c:1842
ext4_lookup+0x72/0x90 fs/ext4/namei.c:1839
__lookup_slow+0x257/0x480 fs/namei.c:1696
lookup_slow fs/namei.c:1713 [inline]
walk_component+0x454/0x5c0 fs/namei.c:2004
link_path_walk.part.0+0x773/0xda0 fs/namei.c:2331
link_path_walk fs/namei.c:3826 [inline]
path_openat+0x1b9/0x520 fs/namei.c:3826
do_filp_open+0x1b7/0x400 fs/namei.c:3857
do_sys_openat2+0x5dc/0x6e0 fs/open.c:1428
do_sys_open fs/open.c:1443 [inline]
__do_sys_openat fs/open.c:1459 [inline]
__se_sys_openat fs/open.c:1454 [inline]
__x64_sys_openat+0x148/0x200 fs/open.c:1454
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x78/0xe2
Freed by task 232726:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522
____kasan_slab_free mm/kasan/common.c:236 [inline]
__kasan_slab_free+0x12a/0x1b0 mm/kasan/common.c:244
kasan_slab_free include/linux/kasan.h:164 [inline]
slab_free_hook mm/slub.c:1827 [inline]
slab_free_freelist_hook mm/slub.c:1853 [inline]
slab_free mm/slub.c:3820 [inline]
kmem_cache_free+0x110/0x760 mm/slub.c:3842
bfq_put_queue+0x6a7/0xfb0 block/bfq-iosched.c:5428
bfq_forget_entity block/bfq-wf2q.c:634 [inline]
bfq_put_idle_entity+0x142/0x240 block/bfq-wf2q.c:645
bfq_forget_idle+0x189/0x1e0 block/bfq-wf2q.c:671
bfq_update_vtime block/bfq-wf2q.c:1280 [inline]
__bfq_lookup_next_entity block/bfq-wf2q.c:1374 [inline]
bfq_lookup_next_entity+0x350/0x480 block/bfq-wf2q.c:1433
bfq_update_next_in_service+0x1c0/0x4f0 block/bfq-wf2q.c:128
bfq_deactivate_entity+0x10a/0x240 block/bfq-wf2q.c:1188
bfq_deactivate_bfqq block/bfq-wf2q.c:1592 [inline]
bfq_del_bfqq_busy+0x2e8/0xad0 block/bfq-wf2q.c:1659
bfq_release_process_ref+0x1cc/0x220 block/bfq-iosched.c:3139
bfq_split_bfqq+0x481/0xdf0 block/bfq-iosched.c:6754
bfq_init_rq+0xf29/0x17a0 block/bfq-iosched.c:6934
bfq_insert_request.isra.0+0xe8/0xa20 block/bfq-iosched.c:6271
bfq_insert_requests+0x27f/0x390 block/bfq-iosched.c:6323
blk_mq_insert_request+0x290/0x8f0 block/blk-mq.c:2660
blk_mq_submit_bio+0x1021/0x15e0 block/blk-mq.c:3143
__submit_bio+0xa0/0x6b0 block/blk-core.c:639
__submit_bio_noacct_mq block/blk-core.c:718 [inline]
submit_bio_noacct_nocheck+0x5b7/0x810 block/blk-core.c:747
submit_bio_noacct+0xca0/0x1990 block/blk-core.c:847
__ext4_read_bh fs/ext4/super.c:205 [inline]
ext4_read_bh+0x15e/0x2e0 fs/ext4/super.c:230
__read_extent_tree_block+0x304/0x6f0 fs/ext4/extents.c:567
ext4_find_extent+0x479/0xd20 fs/ext4/extents.c:947
ext4_ext_map_blocks+0x1a3/0x2680 fs/ext4/extents.c:4182
ext4_map_blocks+0x929/0x15a0 fs/ext4/inode.c:660
ext4_iomap_begin_report+0x298/0x480 fs/ext4/inode.c:3569
iomap_iter+0x3dd/0x1010 fs/iomap/iter.c:91
iomap_fiemap+0x1f4/0x360 fs/iomap/fiemap.c:80
ext4_fiemap+0x181/0x210 fs/ext4/extents.c:5051
ioctl_fiemap.isra.0+0x1b4/0x290 fs/ioctl.c:220
do_vfs_ioctl+0x31c/0x11a0 fs/ioctl.c:811
__do_sys_ioctl fs/ioctl.c:869 [inline]
__se_sys_ioctl+0xae/0x190 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x78/0xe2
commit 1ba0403ac644 ("block, bfq: fix uaf for accessing waker_bfqq after
splitting") fix the problem that if waker_bfqq is in the merge chain,
and current is the only procress, waker_bfqq can be freed from
bfq_split_bfqq(). However, the case that waker_bfqq is not in the merge
chain is missed, and if the procress reference of waker_bfqq is 0,
waker_bfqq can be freed as well.
Fix the problem by checking procress reference if waker_bfqq is not in
the merge_chain.
Fixes: 1ba0403ac644 ("block, bfq: fix uaf for accessing waker_bfqq after splitting")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250108084148.1549973-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No driver is using disable_route_checks, let's remove it.
Because snd_soc_dapm_add_routes() itself will indicate detail error
when failed, this patch removes duplicate dev_err() not only
dev_warn() in error case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Suggested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/87tta8268e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It sets disable_route_checks flag after checking that parent driver
isn't SOF, but skylake driver was removed, so it is dead code.
We can remove last user of disable_route_checks.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Suggested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/87v7uo268m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Nadia Pinaeva writes:
I am working on a tool that allows collecting network performance
metrics by using conntrack events.
Start time of a conntrack entry is used to evaluate seen_reply
latency, therefore the sooner it is timestamped, the better the
precision is.
In particular, when using this tool to compare the performance of the
same feature implemented using iptables/nftables/OVS it is crucial
to have the entry timestamped earlier to see any difference.
At this time, conntrack events can only get timestamped at recv time in
userspace, so there can be some delay between the event being generated
and the userspace process consuming the message.
There is sys/net/netfilter/nf_conntrack_timestamp, which adds a
64bit timestamp (ns resolution) that records start and stop times,
but its not suited for this either, start time is the 'hashtable insertion
time', not 'conntrack allocation time'.
There is concern that moving the start-time moment to conntrack
allocation will add overhead in case of flooding, where conntrack
entries are allocated and released right away without getting inserted
into the hashtable.
Also, even if this was changed it would not with events other than
new (start time) and destroy (stop time).
Pablo suggested to add new CTA_TIMESTAMP_EVENT, this adds this feature.
The timestamp is recorded in case both events are requested and the
sys/net/netfilter/nf_conntrack_timestamp toggle is enabled.
Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com>
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Kernel coding style expects all drivers to ignore debugfs errors.
Partially because it is purely for debugging, not for important user
interfaces. Simplify the code by dropping unnecessary probe failuring
and error message on debugfs failures, which also fixes incorrect usage
IS_ERR_OR_NULL() and Smatch warning:
drivers/soc/tegra/cbb/tegra-cbb.c:80 tegra_cbb_err_debugfs_init() warn: passing zero to 'PTR_ERR'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250104141958.115911-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Access to safety cluster engine (SCE) fabric registers was blocked
by firewall after the introduction of Functional Safety Island in
Tegra234. After that, any access by software to SCE registers is
correctly resulting in the internal bus error. However, when CPUs
try accessing the SCE-fabric registers to print error info,
another firewall error occurs as the fabric registers are also
firewall protected. This results in a second error to be printed.
Disable the SCE fabric node to avoid printing the misleading error.
The first error info will be printed by the interrupt from the
fabric causing the actual access.
Cc: stable@vger.kernel.org
Fixes: 302e154000ec ("arm64: tegra: Add node for CBB 2.0 on Tegra234")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Ivy Huang <yijuh@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20241218000737.1789569-3-yijuh@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The compatible string for the Tegra DCE fabric is currently defined as
'nvidia,tegra234-sce-fabric' but this is incorrect because this is the
compatible string for SCE fabric. Update the compatible for the DCE
fabric to correct the compatible string.
This compatible needs to be correct in order for the interconnect
to catch things such as improper data accesses.
Cc: stable@vger.kernel.org
Fixes: 302e154000ec ("arm64: tegra: Add node for CBB 2.0 on Tegra234")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Ivy Huang <yijuh@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20241218000737.1789569-2-yijuh@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
DMA ID for SPI2 is '16'. Update the incorrect value in the devicetree.
Fixes: bb9667d8187b ("arm64: tegra: Add SPI device tree nodes for Tegra234")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Link: https://lore.kernel.org/r/20241206105201.53596-1-akhilrajeev@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
rsnd_adg_clk_enable() might be failed for some reasons, but it doesn't
check return value for now. In such case, we might get below WARNING from
clk_disable() during probe or suspend. Check rsnd_adg_clk_enable() return
value.
clk_multiplier already disabled
...
Call trace:
clk_core_disable+0xd0/0xd8 (P)
clk_disable+0x2c/0x44
rsnd_adg_clk_control+0x80/0xf4
According to Geert, it happened only 7 times during the last 2 years.
So I have reproduced the issue and created patch by Intentionally making
an error.
Link: https://lore.kernel.org/r/CAMuHMdVUKpO2rsia+36BLFFwdMapE8LrYS0duyd0FmrxDvwEfg@mail.gmail.com
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87seps2522.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While converting to generic mmu_gather with commit 9de7d833e370
("s390/tlb: Convert to generic mmu_gather") __tlb_adjust_range()
is called from pte|pmd|p4d_free_tlb(), but not for pud_free_tlb().
__tlb_adjust_range() adjusts the span of TLB range to be flushed,
but s390 does not make use of it. Thus, this change is only for
consistency.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
