summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-24net: hsr: get ready for const netdev->dev_addrJakub Kicinski
hsr_create_self_node() may get netdev->dev_addr passed as argument, netdev->dev_addr will be const soon. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: bonding: constify and use dev_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Make sure local references to netdev->dev_addr are constant. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: phy: constify netdev->dev_addr referencesJakub Kicinski
netdev->dev_addr will become a const soon(ish), constify the local variables referring to it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: rtnetlink: use __dev_addr_set()Jakub Kicinski
Get it ready for constant netdev->dev_addr. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: core: constify mac addrs in selftestsJakub Kicinski
Get it ready for constant netdev->dev_addr. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: convert users of bitmap_foo() to linkmode_foo()Sean Anderson
This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24Merge branch 'dsa-rtnl'David S. Miller
Vladimir Oltean says: ==================== Drop rtnl_lock from DSA .port_fdb_{add,del} As mentioned in the RFC posted 2 months ago: https://patchwork.kernel.org/project/netdevbpf/cover/20210824114049.3814660-1-vladimir.oltean@nxp.com/ DSA is transitioning to a driver API where the rtnl_lock is not held when calling ds->ops->port_fdb_add() and ds->ops->port_fdb_del(). Drivers cannot take that lock privately from those callbacks either. This change is required so that DSA can wait for switchdev FDB work items to finish before leaving the bridge. That change will be made in a future patch series. A small selftest is provided with the patch set in the hope that concurrency issues uncovered by this series, but not spotted by me by code inspection, will be caught. A status of the existing drivers: - mv88e6xxx_port_fdb_add() and mv88e6xxx_port_fdb_del() take mv88e6xxx_reg_lock() so they should be safe. - qca8k_fdb_add() and qca8k_fdb_del() take mutex_lock(&priv->reg_mutex) so they should be safe. - hellcreek_fdb_add() and hellcreek_fdb_add() take mutex_lock(&hellcreek->reg_lock) so they should be safe. - ksz9477_port_fdb_add() and ksz9477_port_fdb_del() take mutex_lock(&dev->alu_mutex) so they should be safe. - b53_fdb_add() and b53_fdb_del() did not have locking, so I've added a scheme based on my own judgement there (not tested). - felix_fdb_add() and felix_fdb_del() did not have locking, I've added and tested a locking scheme there. - mt7530_port_fdb_add() and mt7530_port_fdb_del() take mutex_lock(&priv->reg_mutex), so they should be safe. - gswip_port_fdb() did not have locking, so I've added a non-expert locking scheme based on my own judgement (not tested). - lan9303_alr_add_port() and lan9303_alr_del_port() take mutex_lock(&chip->alr_mutex) so they should be safe. - sja1105_fdb_add() and sja1105_fdb_del() did not have locking, I've added and tested a locking scheme. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24selftests: net: dsa: add a stress test for unlocked FDB operationsVladimir Oltean
This test is a bit strange in that it is perhaps more manual than others: it does not transmit a clear OK/FAIL verdict, because user space does not have synchronous feedback from the kernel. If a hardware access fails, it is in deferred context. Nonetheless, on sja1105 I have used it successfully to find and solve a concurrency issue, so it can be used as a starting point for other driver maintainers too. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24selftests: lib: forwarding: allow tests to not require mz and jqVladimir Oltean
These programs are useful, but not all selftests require them. Additionally, on embedded boards without package management (things like buildroot), installing mausezahn or jq is not always as trivial as downloading a package from the web. So it is actually a bit annoying to require programs that are not used. Introduce options that can be set by scripts to not enforce these dependencies. For compatibility, default to "yes". Cc: Nikolay Aleksandrov <nikolay@nvidia.com> Cc: Ido Schimmel <idosch@nvidia.com> Cc: Guillaume Nault <gnault@redhat.com> Cc: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_workVladimir Oltean
After talking with Ido Schimmel, it became clear that rtnl_lock is not actually required for anything that is done inside the SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE deferred work handlers. The reason why it was probably added by Arkadi Sharshevsky in commit c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification") was to offer the same locking/serialization guarantees as .ndo_fdb_{add,del} and avoid reworking any drivers. DSA has implemented .ndo_fdb_add and .ndo_fdb_del until commit b117e1e8a86d ("net: dsa: delete dsa_legacy_fdb_add and dsa_legacy_fdb_del") - that is to say, until fairly recently. But those methods have been deleted, so now we are free to drop the rtnl_lock as well. Note that exposing DSA switch drivers to an unlocked method which was previously serialized by the rtnl_mutex is a potentially dangerous affair. Driver writers couldn't ensure that their internal locking scheme does the right thing even if they wanted. We could err on the side of paranoia and introduce a switch-wide lock inside the DSA framework, but that seems way overreaching. Instead, we could check as many drivers for regressions as we can, fix those first, then let this change go in once it is assumed to be fairly safe. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: dsa: introduce locking for the address lists on CPU and DSA portsVladimir Oltean
Now that the rtnl_mutex is going away for dsa_port_{host_,}fdb_{add,del}, no one is serializing access to the address lists that DSA keeps for the purpose of reference counting on shared ports (CPU and cascade ports). It can happen for one dsa_switch_do_fdb_del to do list_del on a dp->fdbs element while another dsa_switch_do_fdb_{add,del} is traversing dp->fdbs. We need to avoid that. Currently dp->mdbs is not at risk, because dsa_switch_do_mdb_{add,del} still runs under the rtnl_mutex. But it would be nice if it would not depend on that being the case. So let's introduce a mutex per port (the address lists are per port too) and share it between dp->mdbs and dp->fdbs. The place where we put the locking is interesting. It could be tempting to put a DSA-level lock which still serializes calls to .port_fdb_{add,del}, but it would still not avoid concurrency with other driver code paths that are currently under rtnl_mutex (.port_fdb_dump, .port_fast_age). So it would add a very false sense of security (and adding a global switch-wide lock in DSA to resynchronize with the rtnl_lock is also counterproductive and hard). So the locking is intentionally done only where the dp->fdbs and dp->mdbs lists are traversed. That means, from a driver perspective, that .port_fdb_add will be called with the dp->addr_lists_lock mutex held on the CPU port, but not held on user ports. This is done so that driver writers are not encouraged to rely on any guarantee offered by dp->addr_lists_lock. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: dsa: lantiq_gswip: serialize access to the PCE tableVladimir Oltean
Looking at the code, the GSWIP switch appears to hold bridging service structures (VLANs, FDBs, forwarding rules) in PCE table entries. Hardware access to the PCE table is non-atomic, and is comprised of several register reads and writes. These accesses are currently serialized by the rtnl_lock, but DSA is changing its driver API and that lock will no longer be held when calling ->port_fdb_add() and ->port_fdb_del(). So this driver needs to serialize the access to the PCE table using its own locking scheme. This patch adds that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: dsa: b53: serialize access to the ARL tableVladimir Oltean
The b53 driver performs non-atomic transactions to the ARL table when adding, deleting and reading FDB and MDB entries. Traditionally these were all serialized by the rtnl_lock(), but now it is possible that DSA calls ->port_fdb_add and ->port_fdb_del without holding that lock. So the driver must have its own serialization logic. Add a mutex and hold it from all entry points (->port_fdb_{add,del,dump}, ->port_mdb_{add,del}). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: mscc: ocelot: serialize access to the MAC tableVladimir Oltean
DSA would like to remove the rtnl_lock from its SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE handlers, and the felix driver uses the same MAC table functions as ocelot. This means that the MAC table functions will no longer be implicitly serialized with respect to each other by the rtnl_mutex, we need to add a dedicated lock in ocelot for the non-atomic operations of selecting a MAC table row, reading/writing what we want and polling for completion. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: dsa: sja1105: serialize access to the dynamic config interfaceVladimir Oltean
The sja1105 hardware seems as concurrent as can be, but when we create a background script that adds/removes a rain of FDB entries without the rtnl_mutex taken, then in parallel we do another operation like run 'bridge fdb show', we can notice these errors popping up: sja1105 spi2.0: port 2 failed to read back entry for 00:01:02:03:00:40 vid 0: -ENOENT sja1105 spi2.0: port 2 failed to add 00:01:02:03:00:40 vid 0 to fdb: -2 sja1105 spi2.0: port 2 failed to read back entry for 00:01:02:03:00:46 vid 0: -ENOENT sja1105 spi2.0: port 2 failed to add 00:01:02:03:00:46 vid 0 to fdb: -2 Luckily what is going on does not require a major rework in the driver. The sja1105_dynamic_config_read() function sends multiple SPI buffers to the peripheral until the operation completes. We should not do anything until the hardware clears the VALID bit. But since there is no locking (i.e. right now we are implicitly serialized by the rtnl_mutex, but if we remove that), it might be possible that the process which performs the dynamic config read is preempted and another one performs a dynamic config write. What will happen in that case is that sja1105_dynamic_config_read(), when it resumes, expects to see VALIDENT set for the entry it reads back. But it won't. This can be corrected by introducing a mutex for serializing SPI accesses to the dynamic config interface which should be atomic with respect to each other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: dsa: sja1105: wait for dynamic config command completion on writes tooVladimir Oltean
The hardware manual says that software should attempt a new dynamic config access (be it a a write or a read-back) only while the VALID bit is cleared. The VALID bit is set by software to 1, and it remains set as long as the hardware is still processing the request. Currently the driver only polls for the command completion only for reads, because that's when we need the actual data read back. Writes have been more or less "asynchronous", although this has never been an observable issue. This change makes sja1105_dynamic_config_write poll the VALID bit as well, to absolutely ensure that a follow-up access to the static config finds the VALID bit cleared. So VALID means "work in progress", while VALIDENT means "entry being read is valid". On reads we check the VALIDENT bit too, while on writes that bit is not always defined. So we need to factor it out of the loop, and make the loop provide back the unpacked command structure, so that sja1105_dynamic_config_read can check the VALIDENT bit. The change also attempts to convert the open-coded loop to use the read_poll_timeout macro, since I know this will come up during review. It's more code, but hey, it uses read_poll_timeout! Tested on SJA1105T, SJA1105S, SJA1110A. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: macb: Use mdio child node for MDIO bus if it existsSean Anderson
This allows explicitly specifying which children are present on the mdio bus. Additionally, it allows for non-phy MDIO devices on the bus. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24dt-bindings: net: macb: Add mdio bus child nodeSean Anderson
This adds an optional mdio bus child node. If present, the mac will look for PHYs there instead of directly under the top-level node. This eliminates any ambiguity about whether child nodes are PHYs, and allows the MDIO bus to contain non-PHY devices. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: bcmgenet: Add support for 7712 16nm internal EPHYFlorian Fainelli
The 16nm internal EPHY that is present in 7712 is actually a 16nm Gigabit PHY which has been forced to operate in 10/100 mode. Its controls are therefore via the EXT_GPHY_CTRL registers and not via the EXT_EPHY_CTRL which are used for all GENETv5 adapters. Add a match on the 7712 compatible string to allow that differentiation to happen. On previous GENETv4 chips the EXT_CFG_IDDQ_GLOBAL_PWR bit was cleared by default, but this is not the case with this chip, so we need to make sure we clear it to power on the EPHY. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24dt-bindings: net: bcmgenet: Document 7712 bindingFlorian Fainelli
7712 includes a GENETv5 adapter with an on-chip 10/100 16nm Ethernet PHY which requires us to document that controller's integration specifically for proper driver keying. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: phy: bcm7xxx: Add EPHY entry for 7712Florian Fainelli
7712 is a 16nm process SoC with a 10/100 integrated Ethernet PHY, utilize the recently defined 16nm EPHY macro to configure that PHY. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: Convert more users of mdiobus_* to mdiodev_*Sean Anderson
This converts users of mdiobus to mdiodev using the following semantic patch: @@ identifier mdiodev; expression regnum; @@ - mdiobus_read(mdiodev->bus, mdiodev->addr, regnum) + mdiodev_read(mdiodev, regnum) @@ identifier mdiodev; expression regnum, val; @@ - mdiobus_write(mdiodev->bus, mdiodev->addr, regnum, val) + mdiodev_write(mdiodev, regnum, val) Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: phylink: Convert some users of mdiobus_* to mdiodev_*Sean Anderson
This refactors the phylink pcs helper functions to use mdiobus_* instead of mdiodev_*. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: mdio: Add helper functions for accessing MDIO devicesSean Anderson
This adds some helpers for accessing non-phy MDIO devices. They are analogous to phy_(read|write|modify), except that they take an mdio_device and not a phy_device. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix dma allocation failure by using ↵Yuiko Oshino
dma_set_mask_and_coherent The dma failure was reported in the raspberry pi github (issue #4117). https://github.com/raspberrypi/linux/issues/4117 The use of dma_set_mask_and_coherent fixes the issue. Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume failsYuiko Oshino
The driver needs to clean up and return when the initialization fails on resume. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24octeontx2-af: Increase number of reserved entries in KPUKiran Kumar K
With current KPU profile, we have 2 reserved entries which can be loaded from firmware to parse custom headers. Adding changes to increase these reserved entries to 6. And also removed KPU entries for unused LTYPEs like NPC_LT_LA_IH_8_ETHER, NPC_LT_LA_IH_4_ETHER, NPC_LT_LA_IH_2_ETHER Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-23regmap: spi: Set regmap max raw r/w from max_transfer_sizeLucas Tanure
Set regmap raw read/write from spi max_transfer_size so regmap_raw_read/write can split the access into chunks Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> [André: fix build warning] Signed-off-by: André Almeida <andrealmeid@collabora.com> Link: https://lore.kernel.org/r/20211021132721.13669-1-andrealmeid@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-23Merge series "Remove TPS80031 driver" from Dmitry Osipenko <digetx@gmail.com>:Mark Brown
TPS80031 driver was upstreamed back in 2013 and never got a user. I noticed that driver is abandoned while was about to write a patch to switch it to a new power-off API (that I'm working on). Driver requires platform data that nobody provides. Instead of changing the dead code, let's remove it. Dmitry Osipenko (3): rtc: tps80031: Remove driver regulator: tps80031: Remove driver mfd: tps80031: Remove driver drivers/mfd/Kconfig | 14 - drivers/mfd/Makefile | 1 - drivers/mfd/tps80031.c | 526 ----------------- drivers/regulator/Kconfig | 9 - drivers/regulator/Makefile | 1 - drivers/regulator/tps80031-regulator.c | 753 ------------------------- drivers/rtc/Kconfig | 8 - drivers/rtc/Makefile | 1 - drivers/rtc/rtc-tps80031.c | 324 ----------- include/linux/mfd/tps80031.h | 637 --------------------- 10 files changed, 2274 deletions(-) delete mode 100644 drivers/mfd/tps80031.c delete mode 100644 drivers/regulator/tps80031-regulator.c delete mode 100644 drivers/rtc/rtc-tps80031.c delete mode 100644 include/linux/mfd/tps80031.h -- 2.32.0
2021-10-23x86/fpu: Remove old KVM FPU interfaceThomas Gleixner
No more users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211022185313.074853631@linutronix.de
2021-10-23x86/kvm: Convert FPU handling to a single swap bufferThomas Gleixner
For the upcoming AMX support it's necessary to do a proper integration with KVM. Currently KVM allocates two FPU structs which are used for saving the user state of the vCPU thread and restoring the guest state when entering vcpu_run() and doing the reverse operation before leaving vcpu_run(). With the new fpstate mechanism this can be reduced to one extra buffer by swapping the fpstate pointer in current::thread::fpu. This makes the upcoming support for AMX and XFD simpler because then fpstate information (features, sizes, xfd) are always consistent and it does not require any nasty workarounds. Convert the KVM FPU code over to this new scheme. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211022185313.019454292@linutronix.de
2021-10-23io-wq: use helper for worker refcountingPavel Begunkov
Use io_worker_release() instead of hand coding it in io_worker_exit(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/6f95f09d2cdbafcbb2e22ad0d1a2bc4d3962bf65.1634987320.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-23regulator: Don't error out fixed regulator in regulator_sync_voltage()Dmitry Osipenko
Fixed regulator can't change voltage and regulator_sync_voltage() returns -EINVAL in this case. Make regulator_sync_voltage() to succeed for regulators that are incapable to change voltage. On NVIDIA Tegra power management driver needs to sync voltage and we have one device (Trimslice) that uses fixed regulator which is getting synced. The syncing error isn't treated as fatal, but produces a noisy error message. This patch silences that error. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211021183308.27786-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-23regulator: tps80031: Remove driverDmitry Osipenko
Driver was upstreamed in 2013 and never got a user, remove it. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211021192258.21968-3-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-23regulator: Fix SY7636A breakageMark Brown
The MFD for SY7636A still isn't merged so we need a dependency even if it ends up not having a real driver due to the header file. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-23x86/fpu: Provide infrastructure for KVM FPU cleanupThomas Gleixner
For the upcoming AMX support it's necessary to do a proper integration with KVM. Currently KVM allocates two FPU structs which are used for saving the user state of the vCPU thread and restoring the guest state when entering vcpu_run() and doing the reverse operation before leaving vcpu_run(). With the new fpstate mechanism this can be reduced to one extra buffer by swapping the fpstate pointer in current::thread::fpu. This makes the upcoming support for AMX and XFD simpler because then fpstate information (features, sizes, xfd) are always consistent and it does not require any nasty workarounds. Provide: - An allocator which initializes the state properly - A replacement for the existing FPU swap mechanim Aside of the reduced memory footprint, this also makes state switching more efficient when TIF_FPU_NEED_LOAD is set. It does not require a memcpy as the state is already correct in the to be swapped out fpstate. The existing interfaces will be removed once KVM is converted over. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211022185312.954684740@linutronix.de
2021-10-23mt76: connac: fix unresolved symbols when CONFIG_PM is unsetFelix Fietkau
mt76_connac_mcu_reg_* functions are always needed by connac based drivers Fixes: 87f9bf24ea84 ("mt76: connac: move mcu reg access utility routines in mt76_connac_lib module") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: Make use of the helper macro kthread_run()Cai Huoqing
Repalce kthread_create/wake_up_process() with kthread_run() to simplify the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: Print error message when reading EEPROM from mtd failedHauke Mehrtens
When the EEPROM data is stored on a MTD partition print an error message when reading this MTD partition failed. This is currently happening often in OpenWrt because the initial data was written with using a flash driver which ignores the error detection data and now OpenWrt uses a driver which checks it. With this patch a better error message is shown: [ 8.986988] mt7915e 0000:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20201105222323 [ 9.100508] mt7915e 0000:01:00.0: reading EEPROM from mtd factory failed: -117 [ 9.144289] mt7915e: probe of 0000:01:00.0 failed with error -22 mt7915 does not work without an EEPROM, MT7922 still works. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7921: disable 4addr capabilityLorenzo Bianconi
4addr is not supported by the driver/firmware yet Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: add debugfs knobs for MCU utilizationShayne Chen
Add debugfs knobs to read MCU utilization, which helps user know firmware status more easily to narrow down CPU bottleneck issues. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: add WA firmware log supportShayne Chen
Support to turn on/off WA firmware log from debugfs. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: fix endiannes warning mt7915_mcu_beacon_check_capsLorenzo Bianconi
Fix the following sparse warning mt7915_mcu_beacon_check_caps routine: warning: cast to restricted __le32 warning: cast from restricted __le16 Fixes: 22dffbddf0167 ("mt76: mt7915: introduce mt7915_mcu_beacon_check_caps()") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: rework debugfs fixed-rate knobRyder Lee
Switch to use new mt7915_mcu_set_fixed_rate_ctrl(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: rework .set_bitrate_mask() to support more optionsRyder Lee
With this patch, driver can support single rate, (HE)GI and HE_LTF configuration through .set_bitrate_mask(). Tested-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: remove mt7915_mcu_add_he()Ryder Lee
Make mt7915_mcu_sta_he_tlv() as a part of mt7915_mcu_add_rate_ctrl() as firmware rate control should get HE rate information from sta_rec_he, and reduce a global function accordingly. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7615: apply cached RF data for DBDCRyder Lee
Band0 and band1 share the same hardware, so band0 will stop Tx/Rx when band1 performs Rx calibration. cal_cache is introduced to solve such corner cases by moving necessary datas from channel_switch to bootup. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23x86/fpu: Prepare for sanitizing KVM FPU codeThomas Gleixner
For the upcoming AMX support it's necessary to do a proper integration with KVM. To avoid more nasty hackery in KVM which violate encapsulation extend struct fpu and fpstate so the fpstate switching can be consolidated and simplified. Currently KVM allocates two FPU structs which are used for saving the user state of the vCPU thread and restoring the guest state when entering vcpu_run() and doing the reverse operation before leaving vcpu_run(). With the new fpstate mechanism this can be reduced to one extra buffer by swapping the fpstate pointer in current::thread::fpu. This makes the upcoming support for AMX and XFD simpler because then fpstate information (features, sizes, xfd) are always consistent and it does not require any nasty workarounds. Add fpu::__task_fpstate to save the regular fpstate pointer while the task is inside vcpu_run(). Add some state fields to fpstate to indicate the nature of the state. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211022185312.896403942@linutronix.de
2021-10-23mt76: mt7615: mt7622: fix ibss and meshpointNick Hainke
commit 7f4b7920318b ("mt76: mt7615: add ibss support") introduced IBSS and commit f4ec7fdf7f83 ("mt76: mt7615: enable support for mesh") meshpoint support. Both used in the "get_omac_idx"-function: if (~mask & BIT(HW_BSSID_0)) return HW_BSSID_0; With commit d8d59f66d136 ("mt76: mt7615: support 16 interfaces") the ibss and meshpoint mode should "prefer hw bssid slot 1-3". However, with that change the ibss or meshpoint mode will not send any beacon on the mt7622 wifi anymore. Devices were still able to exchange data but only if a bssid already existed. Two mt7622 devices will never be able to communicate. This commits reverts the preferation of slot 1-3 for ibss and meshpoint. Only NL80211_IFTYPE_STATION will still prefer slot 1-3. Tested on Banana Pi R64. Fixes: d8d59f66d136 ("mt76: mt7615: support 16 interfaces") Signed-off-by: Nick Hainke <vincent@systemli.org> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211007225725.2615-1-vincent@systemli.org
2021-10-23mt76: mt7921: fix Wformat build warningRandy Dunlap
ARRAY_SIZE() is of type size_t, so the format specfier should be %zu instead of %lu. Fixes this build warning: ../drivers/net/wireless/mediatek/mt76/mt7921/main.c: In function ‘mt7921_get_et_stats’: ../drivers/net/wireless/mediatek/mt76/mt7921/main.c:1024:26: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘unsigned int’ [-Wformat=] dev_err(dev->mt76.dev, "ei: %d SSTATS_LEN: %lu", Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sean Wang <sean.wang@mediatek.com> Cc: linux-wireless@vger.kernel.org Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211022233251.29987-1-rdunlap@infradead.org
generated by cgit (git 2.34.1) at 2025-09-19 12:10:24 +0000