summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-28habanalabs: print pointer using %pOded Gabbay
Don't cast pointer to u64 to print it. Instead, print the pointer using %p. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: fix memory leak with CBs with unaligned sizeOded Gabbay
This patch fix a bug when a command buffer with unaligned size (with regard to PAGE_SIZE) was used. The accounting for the unmap operation wasn't done correctly and could result in a memory leak. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: return correct error code on MMU mapping failureOmer Shpigelman
This patch fix a bug where EINVAL was returned instead of -EINVAL. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: add comments in uapi/misc/habanalabs.hOded Gabbay
Add comment about minimum and maximum size of command buffer. Add some text about the expected input of CS IOCTL. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: extend QMAN0 job timeoutOmer Shpigelman
This patch fix a bug where the timeout for sending a job on QMAN0 by KMD wasn't enough in palladium environment. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: set DMA0 completion to SOB 1007Oded Gabbay
This patch fix a bug where DMA channel 0 completion address wasn't initialized by the driver. The patch sets the address to Sync Object no. 1007 Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: fix validation of WREG32 to DMA completionOded Gabbay
This patch fix a bug in the validation of WREG32 in DMA queues. The validation was too strict. It allowed the user to set the completion address only for DMA channel 1. The fix allows the user to set the completion address for all 5 DMA channels. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: fix mmu cache registers initOded Gabbay
This patch fix an incorrect initialization of the MMU cache registers. The shift operation was done in the wrong direction. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: disable CPU access on timeoutsOded Gabbay
This patch provides a workaround for a bug in the F/W where the response time for a request from KMD may take more then 100ms. This could cause the queue between KMD and the F/W to get out of sync. The WA is to: 1. Increase the timeout of ALL requests to 1s. 2. In case a request isn't answered in time, mark the state as "cpu_disabled" and prevent sending further requests from KMD to the F/W. This will eventually lead to a heartbeat failure and hard reset of the device. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: add MMU DRAM default page mappingOmer Shpigelman
This patch provides a workaround for a H/W bug in Goya, where access to RAZWI from TPC can cause PCI completion timeout. The WA is to use the device MMU to map any unmapped DRAM memory to a default page in the DRAM. That way, the TPC will never reach RAZWI upon accessing a bad address in the DRAM. When a DRAM page is mapped by the user, its default mapping is overwritten. Once that page is unmapped, the MMU driver will map that page to the default page. To help debugging, the driver will set the default page area to 0x99 on device initialization. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: Dissociate RAZWI info from event typesTomer Tayar
This patch provides a workaround for a H/W bug in the RAZWI logger in Goya. The logger doesn't recognize the initiator correctly and as a result, accesses from one initiator are reported that were coming from a different initiator. The WA is to print the error information from the event entries we receive without looking at the RAZWI logger at all. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28Merge tag 'topic/mei-hdcp-2019-02-26' of ↵Greg Kroah-Hartman
git://anongit.freedesktop.org/drm/drm-intel into char-misc-next Daniel writes: mei-hdcp driver mei driver for the me hdcp client, for use by drm/i915. Including the following prep work: - whitelist hdcp client in mei bus - merge to include char-misc-next - drm/i915 side of the mei_hdcp/i915 component interface - component prep work (including one patch touching i915&snd-hda) * tag 'topic/mei-hdcp-2019-02-26' of git://anongit.freedesktop.org/drm/drm-intel: (23 commits) misc/mei/hdcp: Component framework for I915 Interface misc/mei/hdcp: Closing wired HDCP2.2 Tx Session misc/mei/hdcp: Enabling the HDCP authentication misc/mei/hdcp: Verify M_prime misc/mei/hdcp: Repeater topology verification and ack misc/mei/hdcp: Prepare Session Key misc/mei/hdcp: Verify L_prime misc/mei/hdcp: Initiate Locality check misc/mei/hdcp: Store the HDCP Pairing info misc/mei/hdcp: Verify H_prime misc/mei/hdcp: Verify Receiver Cert and prepare km misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session misc/mei/hdcp: Define ME FW interface for HDCP2.2 misc/mei/hdcp: Client driver for HDCP application mei: bus: whitelist hdcp client drm/audio: declaration of struct device drm: helper functions for hdcp2 seq_num to from u32 drm/i915: MEI interface definition drm/i915: header for i915 - MEI_HDCP interface drm/i915: enum port definition is moved into i915_drm.h ...
2019-02-28x86/boot/compressed/64: Do not read legacy ROM on EFI systemKirill A. Shutemov
EFI systems do not necessarily provide a legacy ROM. If the ROM is missing the memory is not mapped at all. Trying to dereference values in the legacy ROM area leads to a crash on Macbook Pro. Only look for values in the legacy ROM area for non-EFI system. Fixes: 3548e131ec6a ("x86/boot/compressed/64: Find a place for 32-bit trampoline") Reported-by: Pitam Mitra <pitamm@gmail.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Bockjoo Kim <bockjoo@phys.ufl.edu> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190219075224.35058-1-kirill.shutemov@linux.intel.com Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202351
2019-02-28Merge branch 'fixes' into nextUlf Hansson
2019-02-28mmc: sdhci-esdhc-imx: correct the fix of ERR004536BOUGH CHEN
Commit 18094430d6b5 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") involve the fix of ERR004536, but the fix is incorrect. Double confirm with IC, need to clear the bit 7 of register 0x6c rather than set this bit 7. Here is the definition of bit 7 of 0x6c: 0: enable the new IC fix for ERR004536 1: do not use the IC fix, keep the same as before Find this issue on i.MX845s-evk board when enable CMDQ, and let system in heavy loading. root@imx8mmevk:~# dd if=/dev/mmcblk2 of=/dev/null bs=1M & root@imx8mmevk:~# memtester 1000M > /dev/zero & root@imx8mmevk:~# [ 139.897220] mmc2: cqhci: timeout for tag 16 [ 139.901417] mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== [ 139.907862] mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 [ 139.914311] mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000 [ 139.920753] mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 [ 139.927193] mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 [ 139.933634] mmc2: cqhci: TDL base: 0x7809c000 | TDL up32: 0x00000000 [ 139.940073] mmc2: cqhci: Doorbell: 0x00030000 | TCN: 0x00000000 [ 139.946518] mmc2: cqhci: Dev queue: 0x00010000 | Dev Pend: 0x00010000 [ 139.952967] mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 [ 139.959411] mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 [ 139.965857] mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 [ 139.972308] mmc2: cqhci: Resp idx: 0x0000002e | Resp arg: 0x00000900 [ 139.978761] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 139.985214] mmc2: sdhci: Sys addr: 0xb2c19000 | Version: 0x00000002 [ 139.991669] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000400 [ 139.998127] mmc2: sdhci: Argument: 0x40110400 | Trn mode: 0x00000033 [ 140.004618] mmc2: sdhci: Present: 0x01088a8f | Host ctl: 0x00000030 [ 140.011113] mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 [ 140.017583] mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f [ 140.024039] mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 [ 140.030497] mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 [ 140.036972] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000502 [ 140.043426] mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 [ 140.049867] mmc2: sdhci: Cmd: 0x00002c1a | Max curr: 0x00ffffff [ 140.056314] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0xffffffff [ 140.062755] mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d00f00 [ 140.069195] mmc2: sdhci: Host ctl2: 0x00000008 [ 140.073640] mmc2: sdhci: ADMA Err: 0x00000007 | ADMA Ptr: 0x7809c108 [ 140.080079] mmc2: sdhci: ============================================ [ 140.086662] mmc2: running CQE recovery Fixes: 18094430d6b5 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-28x86, retpolines: Raise limit for generating indirect calls from switch-caseDaniel Borkmann
From networking side, there are numerous attempts to get rid of indirect calls in fast-path wherever feasible in order to avoid the cost of retpolines, for example, just to name a few: * 283c16a2dfd3 ("indirect call wrappers: helpers to speed-up indirect calls of builtin") * aaa5d90b395a ("net: use indirect call wrappers at GRO network layer") * 028e0a476684 ("net: use indirect call wrappers at GRO transport layer") * 356da6d0cde3 ("dma-mapping: bypass indirect calls for dma-direct") * 09772d92cd5a ("bpf: avoid retpoline for lookup/update/delete calls on maps") * 10870dd89e95 ("netfilter: nf_tables: add direct calls for all builtin expressions") [...] Recent work on XDP from Björn and Magnus additionally found that manually transforming the XDP return code switch statement with more than 5 cases into if-else combination would result in a considerable speedup in XDP layer due to avoidance of indirect calls in CONFIG_RETPOLINE enabled builds. On i40e driver with XDP prog attached, a 20-26% speedup has been observed [0]. Aside from XDP, there are many other places later in the networking stack's critical path with similar switch-case processing. Rather than fixing every XDP-enabled driver and locations in stack by hand, it would be good to instead raise the limit where gcc would emit expensive indirect calls from the switch under retpolines and stick with the default as-is in case of !retpoline configured kernels. This would also have the advantage that for archs where this is not necessary, we let compiler select the underlying target optimization for these constructs and avoid potential slow-downs by if-else hand-rewrite. In case of gcc, this setting is controlled by case-values-threshold which has an architecture global default that selects 4 or 5 (latter if target does not have a case insn that compares the bounds) where some arch back ends like arm64 or s390 override it with their own target hooks, for example, in gcc commit db7a90aa0de5 ("S/390: Disable prediction of indirect branches") the threshold pretty much disables jump tables by limit of 20 under retpoline builds. Comparing gcc's and clang's default code generation on x86-64 under O2 level with retpoline build results in the following outcome for 5 switch cases: * gcc with -mindirect-branch=thunk-inline -mindirect-branch-register: # gdb -batch -ex 'disassemble dispatch' ./c-switch Dump of assembler code for function dispatch: 0x0000000000400be0 <+0>: cmp $0x4,%edi 0x0000000000400be3 <+3>: ja 0x400c35 <dispatch+85> 0x0000000000400be5 <+5>: lea 0x915f8(%rip),%rdx # 0x4921e4 0x0000000000400bec <+12>: mov %edi,%edi 0x0000000000400bee <+14>: movslq (%rdx,%rdi,4),%rax 0x0000000000400bf2 <+18>: add %rdx,%rax 0x0000000000400bf5 <+21>: callq 0x400c01 <dispatch+33> 0x0000000000400bfa <+26>: pause 0x0000000000400bfc <+28>: lfence 0x0000000000400bff <+31>: jmp 0x400bfa <dispatch+26> 0x0000000000400c01 <+33>: mov %rax,(%rsp) 0x0000000000400c05 <+37>: retq 0x0000000000400c06 <+38>: nopw %cs:0x0(%rax,%rax,1) 0x0000000000400c10 <+48>: jmpq 0x400c90 <fn_3> 0x0000000000400c15 <+53>: nopl (%rax) 0x0000000000400c18 <+56>: jmpq 0x400c70 <fn_2> 0x0000000000400c1d <+61>: nopl (%rax) 0x0000000000400c20 <+64>: jmpq 0x400c50 <fn_1> 0x0000000000400c25 <+69>: nopl (%rax) 0x0000000000400c28 <+72>: jmpq 0x400c40 <fn_0> 0x0000000000400c2d <+77>: nopl (%rax) 0x0000000000400c30 <+80>: jmpq 0x400cb0 <fn_4> 0x0000000000400c35 <+85>: push %rax 0x0000000000400c36 <+86>: callq 0x40dd80 <abort> End of assembler dump. * clang with -mretpoline emitting search tree: # gdb -batch -ex 'disassemble dispatch' ./c-switch Dump of assembler code for function dispatch: 0x0000000000400b30 <+0>: cmp $0x1,%edi 0x0000000000400b33 <+3>: jle 0x400b44 <dispatch+20> 0x0000000000400b35 <+5>: cmp $0x2,%edi 0x0000000000400b38 <+8>: je 0x400b4d <dispatch+29> 0x0000000000400b3a <+10>: cmp $0x3,%edi 0x0000000000400b3d <+13>: jne 0x400b52 <dispatch+34> 0x0000000000400b3f <+15>: jmpq 0x400c50 <fn_3> 0x0000000000400b44 <+20>: test %edi,%edi 0x0000000000400b46 <+22>: jne 0x400b5c <dispatch+44> 0x0000000000400b48 <+24>: jmpq 0x400c20 <fn_0> 0x0000000000400b4d <+29>: jmpq 0x400c40 <fn_2> 0x0000000000400b52 <+34>: cmp $0x4,%edi 0x0000000000400b55 <+37>: jne 0x400b66 <dispatch+54> 0x0000000000400b57 <+39>: jmpq 0x400c60 <fn_4> 0x0000000000400b5c <+44>: cmp $0x1,%edi 0x0000000000400b5f <+47>: jne 0x400b66 <dispatch+54> 0x0000000000400b61 <+49>: jmpq 0x400c30 <fn_1> 0x0000000000400b66 <+54>: push %rax 0x0000000000400b67 <+55>: callq 0x40dd20 <abort> End of assembler dump. For sake of comparison, clang without -mretpoline: # gdb -batch -ex 'disassemble dispatch' ./c-switch Dump of assembler code for function dispatch: 0x0000000000400b30 <+0>: cmp $0x4,%edi 0x0000000000400b33 <+3>: ja 0x400b57 <dispatch+39> 0x0000000000400b35 <+5>: mov %edi,%eax 0x0000000000400b37 <+7>: jmpq *0x492148(,%rax,8) 0x0000000000400b3e <+14>: jmpq 0x400bf0 <fn_0> 0x0000000000400b43 <+19>: jmpq 0x400c30 <fn_4> 0x0000000000400b48 <+24>: jmpq 0x400c10 <fn_2> 0x0000000000400b4d <+29>: jmpq 0x400c20 <fn_3> 0x0000000000400b52 <+34>: jmpq 0x400c00 <fn_1> 0x0000000000400b57 <+39>: push %rax 0x0000000000400b58 <+40>: callq 0x40dcf0 <abort> End of assembler dump. Raising the cases to a high number (e.g. 100) will still result in similar code generation pattern with clang and gcc as above, in other words clang generally turns off jump table emission by having an extra expansion pass under retpoline build to turn indirectbr instructions from their IR into switch instructions as a built-in -mno-jump-table lowering of a switch (in this case, even if IR input already contained an indirect branch). For gcc, adding --param=case-values-threshold=20 as in similar fashion as s390 in order to raise the limit for x86 retpoline enabled builds results in a small vmlinux size increase of only 0.13% (before=18,027,528 after=18,051,192). For clang this option is ignored due to i) not being needed as mentioned and ii) not having above cmdline parameter. Non-retpoline-enabled builds with gcc continue to use the default case-values-threshold setting, so nothing changes here. [0] https://lore.kernel.org/netdev/20190129095754.9390-1-bjorn.topel@gmail.com/ and "The Path to DPDK Speeds for AF_XDP", LPC 2018, networking track: - http://vger.kernel.org/lpc_net2018_talks/lpc18_pres_af_xdp_perf-v3.pdf - http://vger.kernel.org/lpc_net2018_talks/lpc18_paper_af_xdp_perf-v2.pdf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: netdev@vger.kernel.org Cc: David S. Miller <davem@davemloft.net> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20190221221941.29358-1-daniel@iogearbox.net
2019-02-28lib/vsprintf: Remove %pCr remnant in commentGeert Uytterhoeven
Support for "%pCr" was removed, but a reference in a comment was forgotten. Fixes: 666902e42fd8344b ("lib/vsprintf: Remove atomic-unsafe support for %pCr") Link: http://lkml.kernel.org/r/20190228105315.744-1-geert+renesas@glider.be To: Andy Shevchenko <andriy.shevchenko@linux.intel.com> To: Andrew Morton <akpm@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-02-28x86/hyper-v: Fix definition of HV_MAX_FLUSH_REP_COUNTLan Tianyu
The max flush rep count of HvFlushGuestPhysicalAddressList hypercall is equal with how many entries of union hv_gpa_page_range can be populated into the input parameter page. The code lacks parenthesis around PAGE_SIZE - 2 * sizeof(u64) which results in bogus computations. Add them. Fixes: cc4edae4b924 ("x86/hyper-v: Add HvFlushGuestAddressList hypercall support") Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: kys@microsoft.com Cc: haiyangz@microsoft.com Cc: sthemmin@microsoft.com Cc: sashal@kernel.org Cc: bp@alien8.de Cc: hpa@zytor.com Cc: gregkh@linuxfoundation.org Cc: devel@linuxdriverproject.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190225143114.5149-1-Tianyu.Lan@microsoft.com
2019-02-28kthread: Do not use TIMER_IRQSAFESebastian Andrzej Siewior
The TIMER_IRQSAFE usage was introduced in commit 22597dc3d97b1 ("kthread: initial support for delayed kthread work") which modelled the delayed kthread code after workqueue's code. The workqueue code requires the flag TIMER_IRQSAFE for synchronisation purpose. This is not true for kthread's delay timer since all operations occur under a lock. Remove TIMER_IRQSAFE from the timer initialisation and use timer_setup() for initialisation purpose which is the official function. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Link: https://lkml.kernel.org/r/20190212162554.19779-2-bigeasy@linutronix.de
2019-02-28kthread: Convert worker lock to raw spinlockJulia Cartwright
In order to enable the queuing of kthread work items from hardirq context even when PREEMPT_RT_FULL is enabled, convert the worker spin_lock to a raw_spin_lock. This is only acceptable to do because the work performed under the lock is well-bounded and minimal. Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reported-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20190212162554.19779-1-bigeasy@linutronix.de
2019-02-28MAINTAINERS: Add Hyper-V IOMMU driver into Hyper-V CORE AND DRIVERS scopeLan Tianyu
This patch is to add Hyper-V IOMMU driver file into Hyper-V CORE and DRIVERS scope. Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-02-28iommu/hyper-v: Add Hyper-V stub IOMMU driverLan Tianyu
On the bare metal, enabling X2APIC mode requires interrupt remapping function which helps to deliver irq to cpu with 32-bit APIC ID. Hyper-V doesn't provide interrupt remapping function so far and Hyper-V MSI protocol already supports to deliver interrupt to the CPU whose virtual processor index is more than 255. IO-APIC interrupt still has 8-bit APIC ID limitation. This patch is to add Hyper-V stub IOMMU driver in order to enable X2APIC mode successfully in Hyper-V Linux guest. The driver returns X2APIC interrupt remapping capability when X2APIC mode is available. Otherwise, it creates a Hyper-V irq domain to limit IO-APIC interrupts' affinity and make sure cpus assigned with IO-APIC interrupt have 8-bit APIC ID. Define 24 IO-APIC remapping entries because Hyper-V only expose one single IO-APIC and one IO-APIC has 24 pins according IO-APIC spec( https://pdos.csail.mit.edu/6.828/2016/readings/ia32/ioapic.pdf). Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-02-28x86/Hyper-V: Set x2apic destination mode to physical when x2apic is availableLan Tianyu
Hyper-V doesn't provide irq remapping for IO-APIC. To enable x2apic, set x2apic destination mode to physcial mode when x2apic is available and Hyper-V IOMMU driver makes sure cpus assigned with IO-APIC irqs have 8-bit APIC id. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-02-28PCI/ATS: Add inline to pci_prg_resp_pasid_required()Kuppuswamy Sathyanarayanan
Fix unused function warning when compiled with CONFIG_PCI_PASID disabled. Fixes: e5567f5f6762 ("PCI/ATS: Add pci_prg_resp_pasid_required() interface.") Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-02-28Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 5.1. Major changes: ath10k * more preparation for SDIO support wil6210 * support up to 20 stations in AP mode
2019-02-28dt-bindings: imx6q-pcie: Add "pcie_aux" clock for imx8mqAndrey Smirnov
Add a binding for an extra clock required on i.MX8MQ. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org
2019-02-28PCI: qcom: Don't deassert reset GPIO during probeBjorn Andersson
Acquiring the reset GPIO low means that reset is being deasserted, this is followed almost immediately with qcom_pcie_host_init() asserting it, initializing it and then finally deasserting it again, for the link to come up. Some PCIe devices requires a minimum time between the initial deassert and subsequent reset cycles. In a platform that boots with the reset GPIO asserted this requirement is being violated by this deassert/assert pulse. Acquire the reset GPIO high to prevent this situation by matching the state to the subsequent asserted state. Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org
2019-02-28wil6210: check null pointer in _wil_cfg80211_merge_extra_iesAlexei Avshalom Lazar
ies1 or ies2 might be null when code inside _wil_cfg80211_merge_extra_ies access them. Add explicit check for null and make sure ies1/ies2 are not accessed in such a case. spos might be null and be accessed inside _wil_cfg80211_merge_extra_ies. Add explicit check for null in the while condition statement and make sure spos is not accessed in such a case. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: ignore HALP ICR if already handledMaya Erez
HALP ICR is set as long as the FW should stay awake. To prevent its multiple handling the driver masks this IRQ bit. However, if there is a different MISC ICR before the driver clears this bit, there is a risk of race condition between HALP mask and unmask. This race leads to HALP timeout, in case it is mistakenly masked. Add an atomic flag to indicate if HALP ICR should be handled. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: fix invalid sta statistics updateDedy Lansky
Upon status ring handling, in case there are both unicast and multicast (cid == max) status messages to handle, wrong sta statistics might get updated. Fix this by setting stats to NULL upon invalid cid (e.g. == max_assoc_sta). Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: accessing 802.3 addresses via utility functionsAhmad Masri
Rearrange the code by having functions to access 802.3 header members, source and destination addresses. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: support up to 20 stations in AP modeAhmad Masri
New FW added support for upto 20 clients in AP mode. Change the driver to support this as well. FW reports it's max supported associations in WMI_READY_EVENT. Some WMI commands/events use cidxtid field which is limited to 16 cids. Use new cid/tid fields instead. For Rx packets cid from rx descriptor is limited to 3 bits (0..7), to find the real cid, compare transmitter address with the stored stations mac address in the driver sta array. EDMA FW still supports 8 stations. Extending the support to 20 stations will come later. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: add option to drop Tx packets when Tx ring is fullDedy Lansky
In AP mode with multiple clients, driver stops net queue (netif_tx_stop_queue) upon first ring (serving specific client) becoming full. This can have negative effect on transmission to other clients which may still have room in their corresponding rings. Implement new policy in which stop/wake net queue are not used. In case there is no room in the ring for a transmitted packet, drop the packet. New policy can be helpful to debug performance issues, to guarantee maximum utilization of net queues. New policy is disabled by default and can be enabled by debugfs: echo 1 > drop_if_ring_full Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: remove rtap_include_phy_info module paramMaya Erez
Due to a HW issue in PHY info collection rtap_include_phy_info is not in use, hence can be removed. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28tee: optee: add missing of_node_put after of_device_is_availableJulia Lawall
Add an of_node_put when a tested device node is not available. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ identifier f; local idexpression e; expression x; @@ e = f(...); ... when != of_node_put(e) when != x = e when != e = x when any if (<+...of_device_is_available(e)...+>) { ... when != of_node_put(e) ( return e; | + of_node_put(e); return ...; ) } // </smpl> Fixes: db878f76b9ff ("tee: optee: take DT status property into account") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-28ath10k: Fill rx duration for each peer in fw_stats for WCN3990Surabhi Vishnoi
Currently, rx_duration for each peer is not getting populated in fw_stats debugfs entry for WCN3990. WCN3990 firmware sends rx duration for each peer as part of peer_extd_stats in WMI_UPDATE_STATS_EVENT. To enable peer_extd_stats, firmware expects host to send fw_stats_req_mask with flag WMI_TLV_PEER_STATS_EXTD set in WMI_REQUEST_STATS_CMD. Send fw_stats_req_mask with flag WMI_TLV_PEER_STATS_EXTD set in WMI_REQUEST_STATS_CMD and parse the peer_extd_stats in WMI_UPDATE_STATS_EVENT to populate the rx_duration of each peer in fw_stats debugfs entry. Currently the driver handles 32-bit rx_duration, but the rx_duration for WCN3990 can be upto 63 bit. The firmware sends rx_duration split into two 32-bit fields, with the upper 32-bits being valid only if its MSB is set. This change handles the 63-bit rx_duration obtained from WCN3990 and maintain the backward compatibility. To get the rx_duration of each connected peer : cat /sys/kernel/debug/ieee80211/phyX/ath10k/fw_stats Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28i3c: master: dw-i3c-master: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/i3c/master/dw-i3c-master.c: In function ‘dw_i3c_master_bus_init’: drivers/i3c/master/dw-i3c-master.c:603:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (ret) ^ drivers/i3c/master/dw-i3c-master.c:605:2: note: here case I3C_BUS_MODE_PURE: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Vitor Soares <vitor.soares@synopsys.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-28MAINTAINERS: Add an IRC channel for the I3C subsystemBoris Brezillon
The #linux-i3c chan has been created on freenode to discuss I3C related topics. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-02-28ath10k: Fix the wrong calculation ht_idx and idx of rate table for tx_statsSurabhi Vishnoi
ht_idx (ht rate index) and idx (rate table index) are calculated based on mcs index. This mcs index used in the above calculation should be 0-9 for getting the correct ht_idx and idx. Currently the mcs index used for the above calculations is mcs index which can be 0-31 (in case of HT), leading to incorrect rate index and ht index values. Fix the issue by obtaining mcs value from the ratecode reported by firmware and use it for calculating ht_idx and idx (rate-table index). Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: e88975ca37d1 ("ath10k: dump tx stats in rate table format") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28ath10k: Fix the wrong updation of SGI in tx_stats debugfsSurabhi Vishnoi
The SGI is updated wrongly in tx stats table in debugfs per sta entry. To know whether the packets/bytes are sent with SHORT GI, test whether the SGI bit(ATH10K_RATE_INFO_FLAGS_SGI_BIT) is set or not in the txrate flags. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28ath10k: Fix the wrong updation of BW in tx_stats debugfs entrySurabhi Vishnoi
Currently, the bandwidth is updated wrongly in BW table in tx_stats debugfs per sta as there is difference in number of bandwidth type in mac80211 and driver stats table. This leads to bandwidth getting updated at wrong index in bandwidth table in tx_stats. Fix this index mismatch between mac80211 and driver stats table (BW table) by making the number of bandwidth type in driver compatible with mac80211. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28ath10k: Fix the incorrect updation of NSS data in tx statsSurabhi Vishnoi
The NSS data is updated incorrectly in the tx stats as the array indexing starts from zero. Fix the incorrect updation of NSS data in tx_stats by taking into consideration the array index starting from zero. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: rtl8192se: Remove set but not used variable 'seg_ptr'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c: In function '_rtl92s_firmware_downloadcode': drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c:139:17: warning: variable 'seg_ptr' set but not used [-Wunused-but-set-variable] It's not used after commit 59ae1d127ac0 ("networking: introduce and use skb_put_data()") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: rtl8723ae: Remove set but not used variable 'bt_retry_cnt'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c: In function '_rtl8723e_dm_bt_coexist_2_ant': drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c:1408:5: warning: variable 'bt_retry_cnt' set but not used [-Wunused-but-set-variable] It's never used and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: rtl8723be: Remove set but not used variable 'b_last_is_cur_rdlstate'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c: In function 'rtl8723be_dm_check_edca_turbo': drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:998:7: warning: variable 'b_last_is_cur_rdlstate' set but not used [-Wunused-but-set-variable] It's never used and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28mt76: fix a leaked reference by adding a missing of_node_putWen Yang
The call to of_find_node_by_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/wireless/mediatek/mt76/eeprom.c:58:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:61:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:67:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:70:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:72:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: rtl8192com: Fix blank line problemsLarry Finger
The following types of blank line problems are reported: WARNING: Missing a blank line after declarations CHECK: Please don't use multiple blank lines There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: rtl8192cu: Fix problems with blank linesLarry Finger
The following problems were found: WARNING: Missing a blank line after declarations CHECK: Please don't use multiple blank lines CHECK: Please use a blank line after function/struct/union/enum declarations There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: rtl8192ce: Fix missing blank linesLarry Finger
The problems filed include the following: WARNING: Missing a blank line after declarations CHECK: Please don't use multiple blank lines There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: Fix all blank line irregularities in main code filesLarry Finger
The types of problems fixed are as follows: WARNING: Missing a blank line after declarations CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: Please don't use multiple blank lines There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-15 22:29:40 +0000