summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-23of: unittest: drop assertions for GPIO hog messagesBartosz Golaszewski
These have now been demoted to debug and are normally hidden. Drop the assertions entirely. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org>
2023-06-23ASoC: amd: update pm_runtime enable sequenceArun Gopal Kondaveeti
pm_runtime_allow() is not needed for ACP child platform devices. Replace pm_runtime_allow() with pm_runtime_mark_last_busy() & pm_runtime_set_active() in pm_runtime enable sequence for ACP child platform drivers. Signed-off-by: Arun Gopal <arungopal.kondaveeti@amd.com> Link: https://lore.kernel.org/r/Message-Id: <20230623214150.4058721-1-arungopal.kondaveeti@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-23spi: Add support for Renesas CSIFabrizio Castro
The RZ/V2M SoC comes with the Clocked Serial Interface (CSI) IP, which is a master/slave SPI controller. This commit adds a driver to support CSI master mode. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Link: https://lore.kernel.org/r/Message-Id: <20230622113341.657842-4-fabrizio.castro.jz@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-23spi: dt-bindings: Add bindings for RZ/V2M CSIFabrizio Castro
Add dt-bindings for the CSI IP found inside the RZ/V2M SoC. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/Message-Id: <20230622113341.657842-2-fabrizio.castro.jz@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-23Merge branch 's390-net-updates-2023-06-10'Paolo Abeni
Alexandra Winter says: ==================== s390/net: updates 2023-06-10 Please apply the following patch series for s390's ctcm and lcs drivers to netdev's net-next tree. Just maintenance patches, no functional changes. ==================== Link: https://lore.kernel.org/r/20230621134921.904217-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23s390/ctcm: Convert sprintf/snprintf to scnprintfThorsten Winkler
This LWN article explains the why scnprintf is preferred over snprintf in general https://lwn.net/Articles/69419/ Ie. snprintf() returns what *would* be the resulting length, while scnprintf() returns the actual length. Note that ctcm_print_statistics() writes the data into the kernel log and is therefore not suitable for sysfs_emit(). Observable behavior is not changed, as there may be dependencies. Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23s390/ctcm: Convert sysfs sprintf to sysfs_emitThorsten Winkler
Following the advice of the Documentation/filesystems/sysfs.rst. All sysfs related show()-functions should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23s390/lcs: Convert sprintf to scnprintfThorsten Winkler
This LWN article explains the why scnprintf is preferred over snprintf in general https://lwn.net/Articles/69419/ Ie. snprintf() returns what *would* be the resulting length, while scnprintf() returns the actual length. Reported-by: Jules Irenge <jbi.octave@gmail.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23s390/lcs: Convert sysfs sprintf to sysfs_emitThorsten Winkler
Following the advice of the Documentation/filesystems/sysfs.rst. All sysfs related show()-functions should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. While at it, follow Linux kernel coding style and unify indentation Reported-by: Jules Irenge <jbi.octave@gmail.com> Reported-by: Joe Perches <joe@perches.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23Merge branch 'net-hns3-there-are-some-cleanup-for-the-hns3-ethernet-driver'Paolo Abeni
Hao Lan says: ==================== net: hns3: There are some cleanup for the HNS3 ethernet driver There are some cleanup for the HNS3 ethernet driver. ==================== Link: https://lore.kernel.org/r/20230621123309.34381-1-lanhao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23net: hns3: clear hns unused parameter alarmPeiyang Wang
Several functions in the hns3 driver have unused parameters. The compiler will warn about them when building with -Wunused-parameter option of hns3. Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23net: hns3: fix strncpy() not using dest-buf length as length issueHao Chen
Now, strncpy() in hns3_dbg_fill_content() use src-length as copy-length, it may result in dest-buf overflow. This patch is to fix intel compile warning for csky-linux-gcc (GCC) 12.1.0 compiler. The warning reports as below: hclge_debugfs.c:92:25: warning: 'strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] strncpy(pos, items[i].name, strlen(items[i].name)); hclge_debugfs.c:90:25: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] strncpy(pos, result[i], strlen(result[i])); strncpy() use src-length as copy-length, it may result in dest-buf overflow. So,this patch add some values check to avoid this issue. Signed-off-by: Hao Chen <chenhao418@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/lkml/202207170606.7WtHs9yS-lkp@intel.com/T/ Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23net: hns3: refine the tcam key convert handleJian Shen
The result of expression '(k ^ ~v) & k' is exactly the same with 'k & v', so simplify it. (k ^ ~v) & k == k & v The truth table (in non table form): k == 0, v == 0: (k ^ ~v) & k == (0 ^ ~0) & 0 == (0 ^ 1) & 0 == 1 & 0 == 0 k & v == 0 & 0 == 0 k == 0, v == 1: (k ^ ~v) & k == (0 ^ ~1) & 0 == (0 ^ 0) & 0 == 1 & 0 == 0 k & v == 0 & 1 == 0 k == 1, v == 0: (k ^ ~v) & k == (1 ^ ~0) & 1 == (1 ^ 1) & 1 == 0 & 1 == 0 k & v == 1 & 0 == 0 k == 1, v == 1: (k ^ ~v) & k == (1 ^ ~1) & 1 == (1 ^ 0) & 1 == 1 & 1 == 1 k & v == 1 & 1 == 1 Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23tracing/probes: Fix tracepoint event with $arg* to fetch correct argumentMasami Hiramatsu (Google)
To hide the first dummy 'data' argument on the tracepoint probe events, the BTF argument array was modified (skip the first argument for tracepoint), but the '$arg*' meta argument parser missed that. Fix to increment the argument index if it is tracepoint probe. And decrement the index when searching the type of the argument. Link: https://lore.kernel.org/all/168657113778.3038017.12245893750241701312.stgit@mhiramat.roam.corp.google.com/ Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2023-06-23Documentation: Fix typo of reference file nameMasami Hiramatsu (Google)
Fix a typo of Documentation/trace/fprobe.rst. Link: https://lore.kernel.org/all/168584575125.2056209.5771945721143181243.stgit@mhiramat.roam.corp.google.com/ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306040144.aD72UzkF-lkp@intel.com/ Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2023-06-23tracing/probes: Fix to return NULL and keep using current argcMasami Hiramatsu (Google)
Fix to return NULL and keep using current argc when there is $argN and the BTF is not available. Link: https://lore.kernel.org/all/168584574094.2056209.2694238431743782342.stgit@mhiramat.roam.corp.google.com/ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306030940.Cej2JoUx-lkp@intel.com/ Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2023-06-23selftests/ftrace: Add new test case which checks for optimized probesAkanksha J N
Add new test case kprobe_opt_types.tc which enables and checks if each probe has been optimized in order to test potential issues with optimized probes. The '|| continue' is added with the echo statement to ignore errors that are caused by trying to add kprobes to non probeable lines and continue with the test. Link: Link: https://lore.kernel.org/linux-trace-kernel/20230428163842.95118-3-akanksha@linux.ibm.com Signed-off-by: Akanksha J N <akanksha@linux.ibm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2023-06-23hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPSMartin Kaiser
SIMPLE_DEV_PM_OPS is deprecated, replace it with DEFINE_SIMPLE_DEV_PM_OPS and use pm_sleep_ptr for setting the driver's pm routines. We can now remove the __maybe_unused qualifier in the suspend and resume functions. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23hwrng: st - keep clock enabled while hwrng is registeredMartin Kaiser
The st-rng driver uses devres to register itself with the hwrng core, the driver will be unregistered from hwrng when its device goes out of scope. This happens after the driver's remove function is called. However, st-rng's clock is disabled in the remove function. There's a short timeframe where st-rng is still registered with the hwrng core although its clock is disabled. I suppose the clock must be active to access the hardware and serve requests from the hwrng core. Switch to devm_clk_get_enabled and let devres disable the clock and unregister the hwrng. This avoids the race condition. Fixes: 3e75241be808 ("hwrng: drivers - Use device-managed registration API") Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23hwrng: st - support compile-testingMartin Kaiser
Allow compile-testing the st-rng driver if we're not running on an ST chipset. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23hwrng: imx-rngc - fix the timeout for init and self checkMartin Kaiser
Fix the timeout that is used for the initialisation and for the self test. wait_for_completion_timeout expects a timeout in jiffies, but RNGC_TIMEOUT is in milliseconds. Call msecs_to_jiffies to do the conversion. Cc: stable@vger.kernel.org Fixes: 1d5449445bd0 ("hwrng: mx-rngc - add a driver for Freescale RNGC") Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23KEYS: asymmetric: Use new crypto interface without scatterlistsHerbert Xu
Use the new akcipher and sig interfaces which no longer have scatterlists in them. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23KEYS: asymmetric: Move sm2 code into x509_public_keyHerbert Xu
The sm2 certificate requires a modified digest. Move the code for the hashing from the signature verification path into the code where we generate the digest. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23KEYS: Add forward declaration in asymmetric-parser.hHerbert Xu
Add forward declaration for struct key_preparsed_payload so that this header file is self-contained. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: sig - Add interface for sign/verifyHerbert Xu
Split out the sign/verify functionality from the existing akcipher interface. Most algorithms in akcipher either support encryption and decryption, or signing and verify. Only one supports both. As a signature algorithm may not support encryption at all, these two should be spearated. For now sig is simply a wrapper around akcipher as all algorithms remain unchanged. This is a first step and allows users to start allocating sig instead of akcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: akcipher - Add sync interface without SG listsHerbert Xu
The only user of akcipher does not use SG lists. Therefore forcing users to use SG lists only results unnecessary overhead. Add a new interface that supports arbitrary kernel pointers. For the time being the copy will be performed unconditionally. But this will go away once the underlying interface is updated. Note also that only encryption and decryption is addressed by this patch as sign/verify will go into a new interface (sig). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: cipher - On clone do crypto_mod_get()Dmitry Safonov
The refcounter of underlying algorithm should be incremented, otherwise it'll be destroyed with the cloned cipher, wrecking the original cipher. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: api - Add __crypto_alloc_tfmgfpHerbert Xu
Use it straight away in crypto_clone_cipher(), as that is not meant to sleep. Fixes: 51d8d6d0f4be ("crypto: cipher - Add crypto_clone_cipher") Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: api - Remove crypto_init_ops()Dmitry Safonov
Purge crypto_type::init() as well. The last user seems to be gone with commit d63007eb954e ("crypto: ablkcipher - remove deprecated and unused ablkcipher support"). Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: rsa - allow only odd e and restrict value in FIPS modeMahmoud Adam
check if rsa public exponent is odd and check its value is between 2^16 < e < 2^256. FIPS 186-5 DSS (page 35)[1] specify that: 1. The public exponent e shall be selected with the following constraints: (a) The public verification exponent e shall be selected prior to generating the primes, p and q, and the private signature exponent d. (b) The exponent e shall be an odd positive integer such that: 2^16 < e < 2^256. [1] https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.186-5.pdf Signed-off-by: Mahmoud Adam <mngyadam@amazon.com> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: geniv - Split geniv out of AEAD Kconfig optionHerbert Xu
Give geniv its own Kconfig option so that its dependencies are distinct from that of the AEAD API code. This also allows it to be disabled if no IV generators (seqiv/echainiv) are enabled. Remove the obsolete select on RNG2 by SKCIPHER2 as skcipher IV generators disappeared long ago. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: algboss - Add missing dependency on RNG2Herbert Xu
The testmgr code uses crypto_rng without depending on it. Add an explicit dependency to Kconfig. Also sort the MANAGER2 dependencies alphabetically. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: starfive - Add RSA algo supportJia Jie Ho
Adding RSA enc/dec and sign/verify feature for StarFive cryptographic module. The module only supports mod sizes up to 2048, therefore calculations more than that will use fallback algo. Co-developed-by: Huan Feng <huan.feng@starfivetech.com> Signed-off-by: Huan Feng <huan.feng@starfivetech.com> Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: starfive - Update hash module irq handlingJia Jie Ho
Hash driver needs to check the value of irq mask register before writing as it will mask irq of other modules. Co-developed-by: Huan Feng <huan.feng@starfivetech.com> Signed-off-by: Huan Feng <huan.feng@starfivetech.com> Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: caam - optimize RNG sample sizeMeenakshi Aggarwal
TRNG "sample size" (the total number of entropy samples that will be taken during entropy generation) default / POR value is very conservatively set to 2500. Let's set it to 512, the same as the caam driver in U-boot (drivers/crypto/fsl_caam.c) does. This solves the issue of RNG performance dropping after a suspend/resume cycle on parts where caam loses power, since the initial U-boot setttings are lost and kernel does not restore them when resuming. Note: when changing the sample size, the self-test parameters need to be updated accordingly. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: caam - add a test for the RNGVictoria Milhoan (b42089)
CAAM includes a Random Number Generator. This change adds a kernel configuration option to test the RNG's capabilities via the hw_random framework. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Signed-off-by: Dan Douglass <dan.douglass@nxp.com> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: caam - adjust RNG timing to support more devicesVictoria Milhoan
Adjust RNG timing parameters to support more i.MX6 devices. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Signed-off-by: Dan Douglass <dan.douglass@nxp.com> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23Merge branch 'topic/midi20' into for-nextTakashi Iwai
Pull one more API update for UMP core. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-23ALSA: ump: Export MIDI1 / UMP conversion helpersTakashi Iwai
Yet more preliminary work for the upcoming USB gadget support. Now export the helpers to convert between legacy MIDI1 and UMP data for handling the MIDI 1.0 USB interface. The header file is moved to include/sound. The API functions are slightly changed, so that they can be used without the direct access to snd_ump object. The allocation is done in ump.c itself as it's a simple kcalloc(). Link: https://lore.kernel.org/r/20230623075530.10976-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-23clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probeFeng Mingxi
Smatch reports: drivers/clocksource/timer-cadence-ttc.c:529 ttc_timer_probe() warn: 'timer_baseaddr' from of_iomap() not released on lines: 498,508,516. timer_baseaddr may have the problem of not being released after use, I replaced it with the devm_of_iomap() function and added the clk_put() function to cleanup the "clk_ce" and "clk_cs". Fixes: e932900a3279 ("arm: zynq: Use standard timer binding") Fixes: 70504f311d4b ("clocksource/drivers/cadence_ttc: Convert init function to return error") Signed-off-by: Feng Mingxi <m202271825@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230425065611.702917-1-m202271825@hust.edu.cn
2023-06-23dt-bindings: timers: Add Ralink SoCs timerSergio Paracuellos
Add YAML documentation for the timer which is present on Ralink SoCs. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230620100231.1412582-1-sergio.paracuellos@gmail.com
2023-06-23clocksource/drivers/hyper-v: Rework clocksource and sched clock setupMichael Kelley
Current code assigns either the Hyper-V TSC page or MSR-based ref counter as the sched clock. This may be sub-optimal in two cases. First, if there is hardware support to ensure consistent TSC frequency across live migrations and Hyper-V is using that support, the raw TSC is a faster source of time than the Hyper-V TSC page. Second, the MSR-based ref counter is relatively slow because reads require a trap to the hypervisor. As such, it should never be used as the sched clock. The native sched clock based on the raw TSC or jiffies is much better. Rework the sched clock setup so it is set to the TSC page only if Hyper-V indicates that the TSC may have inconsistent frequency across live migrations. Also, remove the code that sets the sched clock to the MSR-based ref counter. In the cases where it is not set, the sched clock will then be the native sched clock. As part of the rework, always enable both the TSC page clocksource and the MSR-based ref counter clocksource. Set the ratings so the TSC page clocksource is preferred. While the MSR-based ref counter clocksource is unlikely to ever be the default, having it available for manual selection is convenient for development purposes. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1687201360-16003-1-git-send-email-mikelley@microsoft.com
2023-06-23dt-bindings: timer: brcm,kona-timer: convert to YAMLStanislav Jakubek
Convert Broadcom Kona family timer bindings to DT schema. Changes during conversion: - drop deprecated compatible (it's been deprecated for ~10 years) Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230618144635.GA22166@standask-GA-A55M-S2HP
2023-06-23clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only userUwe Kleine-König
Only the imx-gpt timer driver makes use of enum imx_gpt_type that is otherwise unused. Move its definition into the timer-imx-gpt driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230328100531.879485-3-u.kleine-koenig@pengutronix.de
2023-06-23clk: imx: Drop inclusion of unused header <soc/imx/timer.h>Uwe Kleine-König
The clk drivers use none of the symbols defined in <soc/imx/timer.h>. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230328100531.879485-2-u.kleine-koenig@pengutronix.de
2023-06-22perf pmu: Remove a hard coded cpu PMU assumptionIan Rogers
The property of "cpu" when it has no cpu map is true on S390 with the PMU cpum_cf. Rather than maintain a list of such PMUs, reuse the is_core test result from the caller. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: linux-perf-users@vger.kernel.org Link: https://lore.kernel.org/r/20230623043843.4080180-2-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-06-22perf pmus: Add notion of default PMU for JSON eventsIan Rogers
JSON events created in pmu-events.c by jevents.py may not specify a PMU they are associated with, in which case it is implied that it is the first core PMU. Care is needed to select this for regular 'cpu', s390 'cpum_cf' and ARMs many names as at the point the name is first needed the core PMUs list hasn't been initialized. Add a helper in perf_pmus to create this value, in the worst case by scanning sysfs. v2. Add missing close if fdopendir fails. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Link: https://lore.kernel.org/r/20230623043843.4080180-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-06-22perf unwind: Fix map reference countsIan Rogers
The result of thread__find_map is the map in the passed in addr_location. Calling addr_location__exit puts that map and so copies need to do a map__get. Add in the corresponding map__puts. v2. Add missing map__put when dso is missing. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ivan Babrou <ivan@cloudflare.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Link: https://lore.kernel.org/r/20230623043107.4077510-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-06-22perf test: Set PERF_EXEC_PATH for script executionNamhyung Kim
The task-analyzer.py script (actually every other scripts too) requires PERF_EXEC_PATH env to find dependent libraries and scripts. For scripts test to run correctly, it needs to set PERF_EXEC_PATH to the perf tool source directory. Instead of blindly update the env, let's check the directory structure to make sure it points to the correct location. Fixes: e8478b84d6ba ("perf test: add new task-analyzer tests") Cc: Petar Gligoric <petar.gligoric@rohde-schwarz.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Aditya Gupta <adityag@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-06-22perf script: Initialize buffer for regs_map()Namhyung Kim
The buffer is used to save register mapping in a sample. Normally perf samples don't have any register so the string should be empty. But it missed to initialize the buffer when the size is 0. And it's passed to PyUnicode_FromString() with a garbage data. So it returns NULL due to invalid input (instead of an empty unicode string object) which causes a segfault like below: Thread 2.1 "perf" received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7ffff7c83780 (LWP 193775)] 0x00007ffff6dbca2e in PyDict_SetItem () from /lib/x86_64-linux-gnu/libpython3.11.so.1.0 (gdb) bt #0 0x00007ffff6dbca2e in PyDict_SetItem () from /lib/x86_64-linux-gnu/libpython3.11.so.1.0 #1 0x00007ffff6dbf848 in PyDict_SetItemString () from /lib/x86_64-linux-gnu/libpython3.11.so.1.0 #2 0x000055555575824d in pydict_set_item_string_decref (val=0x0, key=0x5555557f96e3 "iregs", dict=0x7ffff5f7f780) at util/scripting-engines/trace-event-python.c:145 #3 set_regs_in_dict (evsel=0x555555efc370, sample=0x7fffffffb870, dict=0x7ffff5f7f780) at util/scripting-engines/trace-event-python.c:776 #4 get_perf_sample_dict (sample=sample@entry=0x7fffffffb870, evsel=evsel@entry=0x555555efc370, al=al@entry=0x7fffffffb2e0, addr_al=addr_al@entry=0x0, callchain=callchain@entry=0x7ffff63ef440) at util/scripting-engines/trace-event-python.c:923 #5 0x0000555555758ec1 in python_process_tracepoint (sample=0x7fffffffb870, evsel=0x555555efc370, al=0x7fffffffb2e0, addr_al=0x0) at util/scripting-engines/trace-event-python.c:1044 #6 0x00005555555c5db8 in process_sample_event (tool=<optimized out>, event=<optimized out>, sample=<optimized out>, evsel=0x555555efc370, machine=0x555555ef4d68) at builtin-script.c:2421 #7 0x00005555556b7793 in perf_session__deliver_event (session=0x555555ef4b60, event=0x7ffff62ff7d0, tool=0x7fffffffc150, file_offset=30672, file_path=0x555555efb8a0 "perf.data") at util/session.c:1639 #8 0x00005555556bc864 in do_flush (show_progress=true, oe=0x555555efb700) at util/ordered-events.c:245 #9 __ordered_events__flush (oe=oe@entry=0x555555efb700, how=how@entry=OE_FLUSH__FINAL, timestamp=timestamp@entry=0) at util/ordered-events.c:324 #10 0x00005555556bd06e in ordered_events__flush (oe=oe@entry=0x555555efb700, how=how@entry=OE_FLUSH__FINAL) at util/ordered-events.c:342 #11 0x00005555556b9d63 in __perf_session__process_events (session=0x555555ef4b60) at util/session.c:2465 #12 perf_session__process_events (session=0x555555ef4b60) at util/session.c:2627 #13 0x00005555555cb1d0 in __cmd_script (script=0x7fffffffc150) at builtin-script.c:2839 #14 cmd_script (argc=<optimized out>, argv=<optimized out>) at builtin-script.c:4365 #15 0x0000555555650811 in run_builtin (p=p@entry=0x555555ed8948 <commands+456>, argc=argc@entry=4, argv=argv@entry=0x7fffffffe240) at perf.c:323 #16 0x0000555555597eb3 in handle_internal_command (argv=0x7fffffffe240, argc=4) at perf.c:377 #17 run_argv (argv=<synthetic pointer>, argcp=<synthetic pointer>) at perf.c:421 #18 main (argc=4, argv=0x7fffffffe240) at perf.c:537 Fixes: 51cfe7a3e87e ("perf python: Avoid 2 leak sanitizer issues") Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-22 10:23:50 +0000