Age | Commit message (Collapse) | Author |
|
Add CA55 core clocks which are derived from PLLCA55.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/20241213123550.289193-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The clock structure for RZ/G3E is almost identical to RZ/V2H SoC with
more IP blocks compared to RZ/V2H. For eg: VSPI, LVDS, DPI and LCDC1
are present only on the RZ/G3E SoC.
Add minimal clock and reset entries required to boot the Renesas RZ/G3E
SMARC EVK and binds it with the RZ/V2H CPG core driver.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/20241213123550.289193-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Renesas RZ/G3E DT Binding Definitions
DT bindings and binding definitions for the Renesas RZ/G3E (R9A09G047)
SoC, shared by driver and DT source files.
|
|
Add MSTOP support to control buses for the individual units on RZ/V2H.
Use per-bit (instead of group-based) configuration and atomic counters,
to ensure precise control over individual MSTOP bits, and to prevent
issues with shared dependencies between module clocks.
Co-developed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Co-developed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241213123550.289193-2-biju.das.jz@bp.renesas.com
Link: https://lore.kernel.org/20250102181839.352599-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Link: https://lore.kernel.org/20250102181839.352599-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Link: https://lore.kernel.org/20250102181839.352599-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Link: https://lore.kernel.org/20250102181839.352599-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Core Changes:
- drm/print: add drm_print_hex_dump()
Driver Changes:
- HDCP fixes and updates for Xe3lpd and for HDCP 1.4 (Suraj)
- Add dedicated lock for each sideband (Jani)
- New GSC FW for ARL-H and ARL-U (Daniele)
- Add support for 3 VDSC engines 12 slices (Ankit)
- Sanitize MBUS joining (Ville)
- Fixes in DP MST (Imre)
- Stop using pixel_format_from_register_bits() to parse VBT (Ville)
- Declutter CDCLK code (Ville)
- PSR clean up and fixes (Jouni, Jani, Animesh)
- DMC wakelock - Fixes and enablement for Xe3_LPD (Gustavo)
- Demote source OUI read/write failure logging to debug (Jani)
- Potential boot oops fix and some general cleanups (Ville)
- Scaler code cleanups (Ville)
- More conversion towards struct intel_display and general cleanups (Jani)
- Limit max compressed bpp to 18 when forcing DSC (Ankit)
- Start to reconcile i915's and xe's display power mgt sequences (Rodrigo)
- Some correction in the DP Link Training sequence (Arun)
- Avoid setting YUV420_MODE in PIPE_MISC on Xe3lpd (Ankit)
- MST and DDI cleanups and refactoring (Jani)
- Fixed an typo in i915_gem_gtt.c (Zhang)
- Try to make DPT shrinkable again (Ville)
- Try to fix CPU MMIO fails during legacy LUT updates (Ville)
- Some PPS cleanups (Ville, Jani)
- Use seq buf for printing rates (Jani)
- Flush DMC wakelock release work at the end of runtime suspend (Gustavo)
- Fix NULL pointer dereference in capture_engine (Eugene)
- Fix memory leak by correcting cache object name in error handler (Jiasheng)
- Small refactor in WM/DPKGC for modifying latency programmed into PKG_C_LATENCY (Suraj)
- Add drm_printer based hex dumper and use it (Jani)
- Move g4x code to specific g4x functions (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
[sima: conflict in intel_dp_mst.c due to conversion to
drm_connector_dynamic_init that landed through drm-misc]
Link: https://patchwork.freedesktop.org/patch/msgid/Z1n4VhatZpvT5xKs@intel.com
|
|
Update MAINTAINERS and link my various emails to
my company email address in .mailmap.
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Fixup the uc_attr_mem_limit test case to also cover the
KVM_HAS_DEVICE_ATTR ioctl.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-7-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-7-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add a selftests for the interrupt routing configuration when using
ucontrol VMs.
Calling the test may trigger a null pointer dereferences on kernels not
containing the fixes in this patch series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-5-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-5-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Prevent null pointer dereference when processing
KVM_IRQ_ROUTING_S390_ADAPTER routing entries.
The ioctl cannot be processed for ucontrol VMs.
Fixes: f65470661f36 ("KVM: s390/interrupt: do not pin adapter interrupt pages")
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-4-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-4-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add some superficial selftests for the floating interrupt controller
when using ucontrol VMs. These tests are intended to cover very basic
calls only.
Some of the calls may trigger null pointer dereferences on kernels not
containing the fixes in this patch series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-3-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-3-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Prevent null pointer dereference when processing the
KVM_DEV_FLIC_APF_ENABLE and KVM_DEV_FLIC_APF_DISABLE_WAIT ioctls in the
interrupt controller.
Fixes: 3c038e6be0e2 ("KVM: async_pf: Async page fault support on s390")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-2-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-2-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
In commit 77b533411595 ("KVM: s390: VSIE: sort out virtual/physical
address in pin_guest_page"), only pin_scb() has been updated. This
means that in unpin_scb() a virtual address was still used directly as
physical address without conversion. The resulting physical address is
obviously wrong and most of the time also invalid.
Since commit d0ef8d9fbebe ("KVM: s390: Use kvm_release_page_dirty() to
unpin "struct page" memory"), unpin_guest_page() will directly use
kvm_release_page_dirty(), instead of kvm_release_pfn_dirty(), which has
since been removed.
One of the checks that were performed by kvm_release_pfn_dirty() was to
verify whether the page was valid at all, and silently return
successfully without doing anything if the page was invalid.
When kvm_release_pfn_dirty() was still used, the invalid page was thus
silently ignored. Now the check is gone and the result is an Oops.
This also means that when running with a V!=R kernel, the page was not
released, causing a leak.
The solution is simply to add the missing virt_to_phys().
Fixes: 77b533411595 ("KVM: s390: VSIE: sort out virtual/physical address in pin_guest_page")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20241210083948.23963-1-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20241210083948.23963-1-imbrenda@linux.ibm.com>
|
|
In pmc_core_ssram_get_pmc(), the physical addresses for hidden SSRAM
devices are retrieved from the MMIO region of the primary SSRAM device.
If additional devices are not present, the address returned is zero.
Currently, the code does not check for this condition, resulting in
ioremap() incorrectly attempting to map address 0.
Add a check for a zero address and return 0 if no additional devices
are found, as it is not an error for the device to be absent.
Fixes: a01486dc4bb1 ("platform/x86/intel/pmc: Cleanup SSRAM discovery")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250106174653.1497128-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Clearwater Forest (INTEL_ATOM_DARKMONT_X) to SST support list by
adding to isst_cpu_ids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Clearwater Forest support (INTEL_ATOM_DARKMONT_X) to tpmi_cpu_ids
to support domaid id mappings.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Wakeup for IRQ1 should be disabled only in cases where i8042 had
actually enabled it, otherwise "wake_depth" for this IRQ will try to
drop below zero and there will be an unpleasant WARN() logged:
kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug
kernel: ------------[ cut here ]------------
kernel: Unbalanced IRQ 1 wake disable
kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0
The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops
which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and
.poweroff handlers. i8042_pm_suspend(), however, is only set as
the .suspend handler.
Fix the issue by call PMC suspend handler only from the same set of
dev_pm_ops handlers as i8042_pm_suspend(), which currently means just
the .suspend handler.
To reproduce this issue try hibernating (S4) the machine after a fresh boot
without putting it into s2idle first.
Fixes: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://lore.kernel.org/r/c8f28c002ca3c66fbeeb850904a1f43118e17200.1736184606.git.mail@maciej.szmigiero.name
[ij: edited the commit message.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
we need that in ->real_fops == NULL, ->short_fops != NULL case
Fixes: 8dc6d81c6b2a "debugfs: add small file operations for most files"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20241229081223.3193228-1-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Geert reported that my previous short fops debugfs changes
broke m68k, because it only has mandatory alignement of two,
so we can't stash the "is it short" information into the
pointer (as we already did with the "is it real" bit.)
Instead, exploit the fact that debugfs_file_get() called on
an already open file will already find that the fsdata is
no longer the real fops but rather the allocated data that
already distinguishes full/short ops, so only open() needs
to be able to distinguish. We can achieve that by using two
different open functions.
Unfortunately this requires another set of full file ops,
increasing the size by 536 bytes (x86-64), but that's still
a reasonable trade-off given that only converting some of
the wireless stack gained over 28k. This brings the total
cost of this to around 1k, for wins of 28k (all x86-64).
Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/CAMuHMdWu_9-L2Te101w8hU7H_2yobJFPXSwwUmGHSJfaPWDKiQ@mail.gmail.com
Fixes: 8dc6d81c6b2a ("debugfs: add small file operations for most files")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20241129121536.30989-2-johannes@sipsolutions.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DDI0601 2024-09 introduces new features which are enumerated via
ID_AA64ISAR2_EL1, update the sysreg file to reflect these updates.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211-arm64-2024-dpisa-v4-6-0fd403876df2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DDI0601 2024-09 introduces SVE 2.2 as well as a few new optional features,
update sysreg to reflect the changes in ID_AA64ZFR0_EL1 enumerating them.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211-arm64-2024-dpisa-v4-4-0fd403876df2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DDI0601 2024-09 defines two new feature flags in ID_AA64FPFR0_EL1
describing new FP8 operations, describe them in sysreg.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211-arm64-2024-dpisa-v4-3-0fd403876df2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DDI0601 2024-09 defines several new feature flags in ID_AA64ISAR3_EL1,
update our description in sysreg to reflect these.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211-arm64-2024-dpisa-v4-2-0fd403876df2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DDI0601 2024-09 defines a new feature flags in ID_AA64PFR2_EL1
describing support for injecting UNDEF exceptions, update sysreg to
include this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211-arm64-2024-dpisa-v4-1-0fd403876df2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Cosmo found that when there is a new request comes in while BMC is
ready for a response, the complete_response(), which is called to
complete the pending response, would accidentally clear out that new
request and force ssif_bmc to move back to abort state again.
This commit is to address that issue.
Fixes: dd2bc5cc9e25 ("ipmi: ssif_bmc: Add SSIF BMC driver")
Reported-by: Cosmo Chou <chou.cosmo@gmail.com>
Closes: https://lore.kernel.org/lkml/20250101165431.2113407-1-chou.cosmo@gmail.com/
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Message-ID: <20250107034734.1842247-1-quan@os.amperecomputing.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
Now that VirtualBox is able to run as a host on arm64 (e.g. the Apple M3
processors) we can enable VBOXSF_FS (and in turn VBOXGUEST) for this
architecture. Tested with various runs of bonnie++ and dbench on an Apple
MacBook Pro with the latest Virtualbox 7.1.4 r165100 installed.
Signed-off-by: Christian Kujau <lists@nerdbynature.de>
Link: https://lore.kernel.org/r/7384d96c-2a77-39b0-2306-90129bae9342@nerdbynature.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The kafs filesystem limits the maximum length of a cell to 256 bytes, but a
problem occurs if someone actually does that: kafs tries to create a
directory under /proc/net/afs/ with the name of the cell, but that fails
with a warning:
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:405
because procfs limits the maximum filename length to 255.
However, the DNS limits the maximum lookup length and, by extension, the
maximum cell name, to 255 less two (length count and trailing NUL).
Fix this by limiting the maximum acceptable cellname length to 253. This
also allows us to be sure we can create the "/afs/.<cell>/" mountpoint too.
Further, split the YFS VL record cell name maximum to be the 256 allowed by
the protocol and ignore the record retrieved by YFSVL.GetCellName if it
exceeds 253.
Fixes: c3e9f888263b ("afs: Implement client support for the YFSVL.GetCellName RPC op")
Reported-by: syzbot+7848fee1f1e5c53f912b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/6776d25d.050a0220.3a8527.0048.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/376236.1736180460@warthog.procyon.org.uk
Tested-by: syzbot+7848fee1f1e5c53f912b@syzkaller.appspotmail.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Macbook 5,1 with MCP79 lost its backlight control since the recent
change for supporting GSP-RM; it rewrote the whole nv50 backlight
control code and each display engine is supposed to have an entry for
IOR bl callback, but it didn't cover mcp77.
This patch adds the missing bl entry initialization for mcp77 display
engine to recover the backlight control.
Fixes: 2274ce7e3681 ("drm/nouveau/disp: add output backlight control methods")
Cc: stable@vger.kernel.org
Link: https://bugzilla.suse.com/show_bug.cgi?id=1223838
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250102114944.11499-1-tiwai@suse.de
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi <mszeredi@redhat.com>:
- Fix fuse_get_user_pages() allocation failure handling.
- Fix direct-io folio offset and length calculation.
* tag 'fuse-fixes-6.13-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: Set *nbytesp=0 in fuse_get_user_pages on allocation failure
fuse: fix direct io folio offset and length calculation
Link: https://lore.kernel.org/r/CAJfpegu7o_X%3DSBWk_C47dUVUQ1mJZDEGe1MfD0N3wVJoUBWdmg@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit 79d2e1919a27 ("staging: gpib: fix Makefiles") uses the corresponding
config symbols to let Makefiles include the driver sources appropriately in
the kernel build.
Unfortunately, the Makefile in the tnt4882 directory refers to the
non-existing config GPIB_TNT4882. The actual config name for this driver is
GPIB_NI_PCI_ISA, as can be observed in the gpib Makefile.
Probably, this is caused by the subtle differences between the config
names, directory names and file names in ./drivers/staging/gpib/, where
often config names and directory names are identical or at least close in
naming, but in this case, it is not.
Change the reference in the tnt4882 Makefile from the non-existing config
GPIB_TNT4882 to the existing config GPIB_NI_PCI_ISA.
Fixes: 79d2e1919a27 ("staging: gpib: fix Makefiles")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20250107135032.34424-1-lukas.bulwahn@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If we kill a ring and then immediately exit the task, we'll get
cancellattion running by the task and a kthread in io_ring_exit_work.
For DEFER_TASKRUN, we do want to limit it to only one entity executing
it, however it's currently not an issue as it's protected by uring_lock.
Silence lockdep assertions for now, we'll return to it later.
Reported-by: syzbot+1bcb75613069ad4957fc@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7e5f68281acb0f081f65fde435833c68a3b7e02f.1736257837.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The skb_buff struct in br_is_nd_neigh_msg() is never modified. Mark it as
const.
Signed-off-by: Ted Chen <znscnchen@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250104083846.71612-1-znscnchen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Kuniyuki Iwashima says:
====================
dev: Hold per-netns RTNL in register_netdev().
Patch 1 adds rtnl_net_lock_killable() and Patch 2 uses it in
register_netdev() and converts it and unregister_netdev() to
per-netns RTNL.
With this and the netdev notifier series [0], ASSERT_RTNL_NET()
for NETDEV_REGISTER [1] wasn't fired on a simplest QEMU setup
like e1000 + x86_64_defconfig + CONFIG_DEBUG_NET_SMALL_RTNL.
[0]: https://lore.kernel.org/netdev/20250104063735.36945-1-kuniyu@amazon.com/
[1]:
---8<---
diff --git a/net/core/rtnl_net_debug.c b/net/core/rtnl_net_debug.c
index f406045cbd0e..c0c30929002e 100644
--- a/net/core/rtnl_net_debug.c
+++ b/net/core/rtnl_net_debug.c
@@ -21,7 +21,6 @@ static int rtnl_net_debug_event(struct notifier_block *nb,
case NETDEV_DOWN:
case NETDEV_REBOOT:
case NETDEV_CHANGE:
- case NETDEV_REGISTER:
case NETDEV_UNREGISTER:
case NETDEV_CHANGEMTU:
case NETDEV_CHANGEADDR:
@@ -60,19 +59,10 @@ static int rtnl_net_debug_event(struct notifier_block *nb,
ASSERT_RTNL();
break;
- /* Once an event fully supports RTNL_NET, move it here
- * and remove "if (0)" below.
- *
- * case NETDEV_XXX:
- * ASSERT_RTNL_NET(net);
- * break;
- */
- }
-
- /* Just to avoid unused-variable error for dev and net. */
- if (0)
+ case NETDEV_REGISTER:
ASSERT_RTNL_NET(net);
+ break;
+ }
return NOTIFY_DONE;
}
---8<---
====================
Link: https://patch.msgid.link/20250104082149.48493-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Let's hold per-netns RTNL of dev_net(dev) in register_netdev()
and unregister_netdev().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rtnl_lock_killable() is used only in register_netdev()
and will be converted to per-netns RTNL.
Let's unexport it and add the corresponding helper.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In cases where the work done is less than the budget, `fbnic_poll` is
returning 0. This affects the tracing of `napi_poll`. Following is a
snippet of before and after result from `napi_poll` tracepoint. Instead,
returning the work done improves the manual tracing.
Before:
@[10]: 1
...
@[64]: 208175
@[0]: 2128008
After:
@[56]: 86
@[48]: 222
...
@[5]: 1885756
@[6]: 1933841
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250104015316.3192946-1-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ESN context must be synced between software and hardware for both RX
and TX. As the call to xfrm_dev_state_advance_esn() is added for TX,
this patch add the missing logic for TX. So the update is also checked
on every packet sent, to see if need to trigger ESN update worker.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Previously xfrm_dev_state_advance_esn() was added for RX only. But
it's possible that ESN context also need to be synced to hardware for
TX, so call it for outbound in this patch.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
We use NAPI ID as the key for continuing dumps. We also depend
on the NAPIs being sorted by ID within the driver list. Tx NAPIs
(which don't have an ID assigned) break this expectation, it's
not currently possible to dump them reliably. Since Tx NAPIs
are relatively rare, and can't be used in doit (GET or SET)
hide them from the dump API as well.
Fixes: 27f91aaf49b3 ("netdev-genl: Add netlink framework functions for napi")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250103183207.1216004-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Anything selecting SND_SOC_WM8994 should also select MFD_WM8994, as
SND_SOC_WM8994 does not automatically do so. Add the missing selects.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501071530.UwIXs7OL-lkp@intel.com/
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107104134.12147-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For 48Mhz MCLK systems the calculation of the HW rate is broken,
and will not produce even one sane rate. Since es83xx supports
the option to halve MCLK, calculate also rates with MCLK/2.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://patch.msgid.link/20241227202751.244954-1-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ASoC driver should not be used without the MFD component. This was
causing randconfig issues with regmap IRQ which is selected by the MFD
part of the wm8994 driver.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501061337.R0DlBUoD-lkp@intel.com/
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250106154639.3999553-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The root cause is that TAS2781 internal register is not unlocked
before writing data into TAS2781_PRM_TEST_57_REG.
Fixes: 49e2e353fb0d ("ASoC: tas2781: Add Calibration Kcontrols for Chromebook")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20241227074909.1974-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Lorenzo Bianconi says:
====================
net: airoha: Add Qdisc offload support
Introduce support for ETS and HTB Qdisc offload available on the Airoha
EN7581 ethernet controller.
====================
Link: https://patch.msgid.link/20250103-airoha-en7581-qdisc-offload-v1-0-608a23fa65d5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce support for HTB Qdisc offload available in the Airoha EN7581
ethernet controller. EN7581 can offload only one level of HTB leafs.
Each HTB leaf represents a QoS channel supported by EN7581 SoC.
The typical use-case is creating a HTB leaf for QoS channel to rate
limit the egress traffic and attach an ETS Qdisc to each HTB leaf in
order to enforce traffic prioritization.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce support for ETS Qdisc offload available on the Airoha EN7581
ethernet controller. In order to be effective, ETS Qdisc must configured
as leaf of a HTB Qdisc (HTB Qdisc offload will be added in the following
patch). ETS Qdisc available on EN7581 ethernet controller supports at
most 8 concurrent bands (QoS queues). We can enable an ETS Qdisc for
each available QoS channel.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Airoha EN7581 SoC supports 32 Tx DMA rings used to feed packets to QoS
channels. Each channels supports 8 QoS queues where the user can apply
QoS scheduling policies. In a similar way, the user can configure hw
rate shaping for each QoS channel.
Introduce ndo_select_queue callback in order to select the tx queue
based on QoS channel and QoS queue. In particular, for dsa device select
QoS channel according to the dsa user port index, rely on port id
otherwise. Select QoS queue based on the skb priority.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is a preliminary patch in order to enable hw Qdisc offloading.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The error handling for the case `con_index == 0` should involve dropping
the pm usage counter, as ucsi_ccg_sync_control() gets it at the
beginning. Fix it.
Cc: stable <stable@kernel.org>
Fixes: e56aac6e5a25 ("usb: typec: fix potential array underflow in ucsi_ccg_sync_control()")
Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250107015750.2778646-1-gongruiqi1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes data corruption when accessing the internal SD card in mass
storage mode.
I am actually not too sure why. I didn't figure a straightforward way to
reproduce the issue, but i seem to get garbage when issuing a lot (over 50)
of large reads (over 120 sectors) are done in a quick succession. That is,
time seems to matter here -- larger reads are fine if they are done with
some delay between them.
But I'm not great at understanding this sort of things, so I'll assume
the issue other, smarter, folks were seeing with similar phones is the
same problem and I'll just put my quirk next to theirs.
The "Software details" screen on the phone is as follows:
V 04.06
07-08-13
RM-849
(c) Nokia
TL;DR version of the device descriptor:
idVendor 0x0421 Nokia Mobile Phones
idProduct 0x06c2
bcdDevice 4.06
iManufacturer 1 Nokia
iProduct 2 Nokia 208
The patch assumes older firmwares are broken too (I'm unable to test, but
no biggie if they aren't I guess), and I have no idea if newer firmware
exists.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250101212206.2386207-1-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We should do reverse selection of other components from
CONFIG_USB_F_MIDI2 which is tristate, instead of
CONFIG_USB_CONFIGFS_F_MIDI2 which is bool, for satisfying subtle
module dependencies.
Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250101131124.27599-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|