| Age | Commit message (Collapse) | Author |
|---|
|
When mounting a squashfs fails, squashfs_cache_init() may return an error
pointer (e.g., -ENOMEM) instead of NULL. However, squashfs_cache_delete()
only checks for a NULL cache, and attempts to dereference the invalid
pointer. This leads to a kernel crash (BUG: unable to handle kernel
paging request in squashfs_cache_delete).
This patch fixes the issue by checking IS_ERR(cache) before accessing it.
Link: https://lkml.kernel.org/r/20250306132855.2030-1-zhiyuzhang999@gmail.com
Fixes: 49ff29240ebb ("squashfs: make squashfs_cache_init() return ERR_PTR(-ENOMEM)")
Signed-off-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Reported-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Closes: https://lore.kernel.org/linux-fsdevel/CALf2hKvaq8B4u5yfrE+BYt7aNguao99mfWxHngA+=o5hwzjdOg@mail.gmail.com/
Tested-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A shmem folio can be either in page cache or in swap cache, but not at the
same time. Namely, once it is in swap cache, folio->mapping should be
NULL, and the folio is no longer in a shmem mapping.
In __folio_migrate_mapping(), to determine the number of xarray entries to
update, folio_test_swapbacked() is used, but that conflates shmem in page
cache case and shmem in swap cache case. It leads to xarray multi-index
entry corruption, since it turns a sibling entry to a normal entry during
xas_store() (see [1] for a userspace reproduction). Fix it by only using
folio_test_swapcache() to determine whether xarray is storing swap cache
entries or not to choose the right number of xarray entries to update.
[1] https://lore.kernel.org/linux-mm/Z8idPCkaJW1IChjT@casper.infradead.org/
Note:
In __split_huge_page(), folio_test_anon() && folio_test_swapcache() is
used to get swap_cache address space, but that ignores the shmem folio in
swap cache case. It could lead to NULL pointer dereferencing when a
in-swap-cache shmem folio is split at __xa_store(), since
!folio_test_anon() is true and folio->mapping is NULL. But fortunately,
its caller split_huge_page_to_list_to_order() bails out early with EBUSY
when folio->mapping is NULL. So no need to take care of it here.
Link: https://lkml.kernel.org/r/20250305200403.2822855-1-ziy@nvidia.com
Fixes: fc346d0a70a1 ("mm: migrate high-order folios in swap cache correctly")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: Liu Shixin <liushixin2@huawei.com>
Closes: https://lore.kernel.org/all/28546fb4-5210-bf75-16d6-43e1f8646080@huawei.com/
Suggested-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In dissolve_free_huge_page(), free huge pages are dissolved without
adjusting surplus count. However, free huge pages may be accounted as
surplus pages, and will lead to wrong surplus count.
I reproduce this issue on qemu. The steps are:
1) Node1 is memory-less at first. Hot-add memory to node1 by executing
the two commands in qemu monitor:
object_add memory-backend-ram,id=mem1,size=1G
device_add pc-dimm,id=dimm1,memdev=mem1,node=1
2) online one memory block of Node1 with：
echo online_movable > /sys/devices/system/node/node1/memoryX/state
3) create 64 huge pages for node1
4) run a program to reserve (don't consume) all the huge pages
5) echo 0 > nr_huge_pages for node1. After this step, free huge pages in
Node1 are surplus.
6) create 80 huge pages for node0
7) offline memory of node1, The memory range to offline contains the free
surplus huge pages created in step3) ~ step5)
echo offline > /sys/devices/system/node/node1/memoryX/state
8) kill the program in step 4)
The result:
Node0 Node1
total 80 0
free 80 0
surplus 0 61
To fix it, adjust surplus when destroying huge pages if the node has
surplus pages in dissolve_free_hugetlb_folio().
The result with this patch:
Node0 Node1
total 80 0
free 80 0
surplus 0 0
Link: https://lkml.kernel.org/r/20250304132106.2872754-1-tujinjiang@huawei.com
Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The function for allocating and initialize a 'struct damos' object,
damon_new_scheme(), is not initializing damos->walk_completed field. Only
damos_walk_complete() is setting the field. Hence the field will be
eventually set and used correctly from second damos_walk() call for the
scheme. But the first damos_walk() could mistakenly not walk on the
regions. Actually, a common usage of DAMOS for taking an access pattern
snapshot is installing a monitoring-purpose DAMOS scheme, doing
damos_walk() to retrieve the snapshot, and then removing the scheme.
DAMON user-space tool (damo) also gets runtime snapshot in the way. Hence
the problem can continuously happen in such use cases. Initialize it
properly in the allocation function.
Link: https://lkml.kernel.org/r/20250228174450.41472-1-sj@kernel.org
Fixes: bf0eaba0ff9c ("mm/damon/core: implement damos_walk()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Filtering decisions are made in filters evaluation order. Once a decision
is made by a filter, filters that scheduled to be evaluated after the
decision-made filter should just respect it. This is the intended and
documented behavior. Since core layer-handled filters are evaluated
before operations layer-handled filters, decisions made on core layer
should respected by ops layer.
In case of reject filters, the decision is respected, since core
layer-rejected regions are not passed to ops layer. But in case of allow
filters, ops layer filters don't know if the region has passed to them
because it was allowed by core filters or just because it didn't match to
any core layer. The current wrong implementation assumes it was due to
not matched by any core filters. As a reuslt, the decision is not
respected. Pass the missing information to ops layer using a new filed in
'struct damos', and make the ops layer filters respect it.
Link: https://lkml.kernel.org/r/20250228175336.42781-1-sj@kernel.org
Fixes: 491fee286e56 ("mm/damon/core: support damos_filter->allow")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is a generic anti-pattern that shows up in the VFS and several
filesystems where the hot write paths touch userspace twice when they
could get away with doing it once.
Dave Chinner suggested that they should all be fixed up[1]. I agree[2].
But, the series to do that fixup spans a bunch of filesystems and a lot of
people. This patch fixes common code that absolutely everyone uses. It
has measurable performance benefits[3].
I think this patch can go in and not be held up by the others.
I will post them separately to their separate maintainers for
consideration. But, honestly, I'm not going to lose any sleep if
the maintainers don't pick those up.
1. https://lore.kernel.org/all/Z5f-x278Z3wTIugL@dread.disaster.area/
2. https://lore.kernel.org/all/20250129181749.C229F6F3@davehans-spike.ostc.intel.com/
3. https://lore.kernel.org/all/202502121529.d62a409e-lkp@intel.com/
This patch:
There is a bit of a sordid history here. I originally wrote
998ef75ddb57 ("fs: do not prefault sys_write() user buffer pages")
to fix a performance issue that showed up on early SMAP hardware.
But that was reverted with 00a3d660cbac because it exposed an
underlying filesystem bug.
This is a reimplementation of the original commit along with some
simplification and comment improvements.
The basic problem is that the generic write path has two userspace
accesses: one to prefault the write source buffer and then another to
perform the actual write. On x86, this means an extra STAC/CLAC pair.
These are relatively expensive instructions because they function as
barriers.
Keep the prefaulting behavior but move it into the slow path that gets
run when the write did not make any progress. This avoids livelocks
that can happen when the write's source and destination target the
same folio. Contrary to the existing comments, the fault-in does not
prevent deadlocks. That's accomplished by using an "atomic" usercopy
that disables page faults.
The end result is that the generic write fast path now touches
userspace once instead of twice.
0day has shown some improvements on a couple of microbenchmarks:
https://lore.kernel.org/all/202502121529.d62a409e-lkp@intel.com/
Link: https://lkml.kernel.org/r/20250228203722.CAEB63AC@davehans-spike.ostc.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/yxyuijjfd6yknryji2q64j3keq2ygw6ca6fs5jwyolklzvo45s@4u63qqqyosy2/
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix race between rmmod and /proc/XXX's inode instantiation.
The bug is that pde->proc_ops don't belong to /proc, it belongs to a
module, therefore dereferencing it after /proc entry has been registered
is a bug unless use_pde/unuse_pde() pair has been used.
use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops
never changes so information necessary for inode instantiation can be
saved _before_ proc_register() in PDE itself and used later, avoiding
pde->proc_ops->... dereference.
rmmod lookup
sys_delete_module
proc_lookup_de
pde_get(de);
proc_get_inode(dir->i_sb, de);
mod->exit()
proc_remove
remove_proc_subtree
proc_entry_rundown(de);
free_module(mod);
if (S_ISREG(inode->i_mode))
if (de->proc_ops->proc_read_iter)
--> As module is already freed, will trigger UAF
BUG: unable to handle page fault for address: fffffbfff80a702b
PGD 817fc4067 P4D 817fc4067 PUD 817fc0067 PMD 102ef4067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 26 UID: 0 PID: 2667 Comm: ls Tainted: G
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:proc_get_inode+0x302/0x6e0
RSP: 0018:ffff88811c837998 EFLAGS: 00010a06
RAX: dffffc0000000000 RBX: ffffffffc0538140 RCX: 0000000000000007
RDX: 1ffffffff80a702b RSI: 0000000000000001 RDI: ffffffffc0538158
RBP: ffff8881299a6000 R08: 0000000067bbe1e5 R09: 1ffff11023906f20
R10: ffffffffb560ca07 R11: ffffffffb2b43a58 R12: ffff888105bb78f0
R13: ffff888100518048 R14: ffff8881299a6004 R15: 0000000000000001
FS: 00007f95b9686840(0000) GS:ffff8883af100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff80a702b CR3: 0000000117dd2000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
proc_lookup_de+0x11f/0x2e0
__lookup_slow+0x188/0x350
walk_component+0x2ab/0x4f0
path_lookupat+0x120/0x660
filename_lookup+0x1ce/0x560
vfs_statx+0xac/0x150
__do_sys_newstat+0x96/0x110
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[adobriyan@gmail.com: don't do 2 atomic ops on the common path]
Link: https://lkml.kernel.org/r/3d25ded0-1739-447e-812b-e34da7990dcf@p183
Fixes: 778f3dd5a13c ("Fix procfs compat_ioctl regression")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some AMD laptops with ACP6X do not expose the DMIC properly on Linux.
Adding a DMI quirk enables mic functionality.
Similar to Bugzilla #218402, this issue affects multiple users.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219853
Signed-off-by: keenplify <keenplify@gmail.com>
Link: https://patch.msgid.link/20250315111617.12194-1-keenplify@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible string "fsl,imx94-sai" for the i.MX94 chip, which is
backward compatible with i.MX95. Set it to fall back to "fsl,imx95-sai".
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250306171013.243332-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the allocation of the OOB buffer fails, the
qcom_spi_ecc_init_ctx_pipelined() function returns without freeing
the memory allocated for 'ecc_cfg' thus it can cause a memory leak.
Call kfree() to free 'ecc_cfg' before returning from the function
to avoid that.
Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250313-qpic-snand-memleak-fix-v1-1-e54e78d1da3a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The return value of spi_setup() is not captured within
spi_mux_select() and it is assumed to be always success.
CID: 1638374
Signed-off-by: Sergio Perez Gonzalez <sperezglz@gmail.com>
Link: https://patch.msgid.link/20250316054651.13242-1-sperezglz@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The sg2044_spifmc_write() function uses 'ret' of unsigned type
size_t to capture return values from sg2044_spifmc_wait_xfer_size()
and sg2044_spifmc_wait_int(). Since these functions may return
negative error codes, using an unsigned type prevents proper
error detection, as size_t cannot represent negative values.
Change 'ret' to type int so that negative values are handled correctly.
Fixes: de16c322eefb ("spi: sophgo: add SG2044 SPI NOR controller driver")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250313214545.7444-1-qasdev00@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "base" pointer is uninitialized. It should be "spifmc->io_base"
instead.
Fixes: de16c322eefb ("spi: sophgo: add SG2044 SPI NOR controller driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/d343921b-16b8-429b-888a-f51bb6f2edc8@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "ret" variable needs to be signed for the error handling to work.
It should be type int, since it only holds zero and negative error
codes.
Fixes: de16c322eefb ("spi: sophgo: add SG2044 SPI NOR controller driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/4e16e1bf-e5fb-4771-bc92-c5cba9aac473@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
One of the cases in sg2044_spifmc_probe() may be converted to use
dev_err_probe(). Do it.
While at it, use local device pointer in all such calls and drop
unneeded __func__ parameter as dev_err_probe() is assumed to be called
only during probe phase.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250313111423.322775-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver has a wrong order of the cleaning up the resources,
i.e. it first will destroy the mutex and only then free the SPI
which might still use it. Fix this by switching to devm_mutex_init().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250313111423.322775-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Support new PMIC PF9453, which is totally difference with PCA9450. So
create new file for it.
The PF9453 is a single chip Power Management IC (PMIC) specifically
designed for i.MX 91 processor. It provides power supply solutions for IoT
(Internet of Things), smart appliance, and portable applications where size
and efficiency are critical. The device provides four high efficiency
step-down regulators, three LDOs, one 400 mA load switch and 32.768 kHz
crystal oscillator driver.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250314-pf9453-v5-2-ab0cf1f871b0@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the compatible string "nxp,pf9453" for the PF9453 regulator. The PF9453
is similar to the PCA9460 but supports only LDO1, LDO2, LDO_SVNS, and
BUCK[1-4].
Restrict LDO and BUCK numbers for nxp,pf9453 and keep the same restriction
for other compatible strings.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250314-pf9453-v5-1-ab0cf1f871b0@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
-flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250312072635.1429870-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When snd_soc_dapm_new_controls() or snd_soc_dapm_add_routes() fails,
wcd937x_soc_codec_probe() returns without releasing 'wcd937x->clsh_info',
which is allocated by wcd_clsh_ctrl_alloc. Add wcd_clsh_ctrl_free()
to prevent potential memory leak.
Fixes: 313e978df7fc ("ASoC: codecs: wcd937x: add audio routing and Kconfig")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20250226085050.3584898-1-haoxiang_li2024@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have similar but different function names
snd_soc_dpcm_fe_can_xxx()
snd_soc_dpcm_be_can_xxx()
snd_soc_dpcm_can_be_xxx()
~~~~~~
Let's unified these to can_xx
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plip7ie4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There needs to be some cleanup on this error path. We can't just
return directly.
Fixes: aaf7a668bb38 ("ASoC: amd: acp: Add new interrupt handle callbacks in acp_common_hw_ops")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/3dad80cb-e177-45aa-97ac-df9c98a47d94@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
clk_disable_unprepare()
clk_disable_unprepare() already checks NULL by using IS_ERR_OR_NULL.
Remove unneeded NULL check for adc3xxx->mclk here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250312034337.1235378-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ADX startup() callback uses atomic poll timeout on ADX status register.
This is unnecessary because:
- The startup() callback itself is non-atomic.
- The subsequent timeout call in the same function already uses a
non-atomic version.
Using atomic version can hog CPU when it is not really needed,
so replace it with non-atomic version.
Fixes: a99ab6f395a9e ("ASoC: tegra: Add Tegra210 based ADX driver")
Signed-off-by: Ritu Chaudhary <rituc@nvidia.com>
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250311062010.33412-1-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All varibale allocated by kzalloc and devm_kzalloc could be NULL.
Multiple pointer checks and their cleanup are added.
This issue is found by our static analysis tool
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://patch.msgid.link/20250311015714.1333857-1-chenyuan0y@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
clk_disable_unprepare() already checks NULL by using IS_ERR_OR_NULL.
Remove unneeded NULL check for clk here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250312032600.1235158-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
clk_disable_unprepare()
clk_disable_unprepare() already checks NULL by using IS_ERR_OR_NULL.
Remove unneeded NULL check for dev->ext_clk here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250312033509.1235268-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
strncpy() is deprecated for NUL-terminated destination buffers. Use
strscpy() instead and remove the manual NUL-termination.
Compile-tested only.
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
The m68k architecture's source files do not require <linux/fb.h>.
Remove the include statements.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
Add support for parsing the Group Entity properties from DisCo/ACPI.
Group Entities allow control of several other Entities, typically
Selector Units, from a single control.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SDCA Ranges are two dimensional arrays of data associated with controls,
add a helper to provide an x,y access mechanism to the data and a helper
to locate a specific value inside a range.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SDCA Controls come in a variety of data formats, to simplify later
parsing work out this data type as the control is parsed and stash it
for later use.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Implementation defined controls will not be present in the large list of
known controls for SDCA. The driver should not return an error for these,
because it is perfectly legal to have implementation defined controls.
Update the handling to instead generate a generic name.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the cleanup.h helpers to manage some local buffers, this cleans up
the error paths a little.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Slightly neaten up the initialization write code to overlay a struct
rather than shifting the pointer along manually. This also removes the
Sparse warning:
sound/soc/sdca/sdca_functions.c:233:36: warning: cast to restricted __le32
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current code for the IRQ in pcm6240 makes no sense:
it looks up an IRQ with of_irq_get(), treat it as a GPIO
by issuing gpio_request(), gpio_direction_input()
and gpio_to_irq() on it.
This is just wrong, if the device tree assigns the IRQ
from a GPIO number this is just incorrect: it is clearly
stated that GPIO providers and IRQ providers are
orthogonal.
It is possible to look up an IRQ to a corresponding GPIO
line but this is taking an IRQ and pretending it's a
GPIO, which is just semantically wrong.
Drop the offending code and treat the IRQ that we get
from the device tree as any other IRQ, see for example
other codec drivers.
The DT bindings for this codec does not have any in-tree
DTS files, which may explain why things are weird.
As a bonus, this moves the driver away from the legacy
<linux/gpio.h> include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250312-pcm-codecs-v1-3-41ffc4f8fc5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This converts the PCM3008 driver to look up the GPIO lines
using descriptors.
Apparently there are no in-tree users of the platform data
struct, so users need to adopt.
New users can associate the GPIO lines with the platform
device "pcm3008-codec".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250312-pcm-codecs-v1-2-41ffc4f8fc5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver includes the legacy GPIO header <linux/gpio.h>
but does not use any symbols from it so drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250312-pcm-codecs-v1-1-41ffc4f8fc5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable headset jack detection for MT8188 platforms that use the MT6359
ACCDET block for it, indicated by the mediatek,accdet property in DT.
For those platforms, register a jack and initialize the ACCDET block to
report jack events through it.
Co-developed-by: Zoran Zhan <zoran.zhan@mediatek.com>
Signed-off-by: Zoran Zhan <zoran.zhan@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250306-mt8188-accdet-v3-4-7828e835ff4b@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a stub for mt6359_accdet_enable_jack_detect() to prevent linker
failures in the machine sound drivers calling it when
CONFIG_SND_SOC_MT6359_ACCDET is not enabled.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250306-mt8188-accdet-v3-3-7828e835ff4b@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Handle the optional mediatek,accdet property. When present, retrieve the
sound component from its phandle, so the machine sound driver can use it
to register the audio jack and initialize the MT6359 ACCDET for jack
detection.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250306-mt8188-accdet-v3-2-7828e835ff4b@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a mediatek,accdet phandle property to allow getting a reference to
the MT6359 ACCDET block, which is responsible for detecting jack
insertion/removal.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250306-mt8188-accdet-v3-1-7828e835ff4b@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver is for amplifiers aw88166 of Awinic Technology
Corporation. The AW88166 is a high efficiency digital
Smart K audio amplifier
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://patch.msgid.link/20250312120100.9730-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the awinic,aw88166 property to support the aw88166 chip.
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250312120100.9730-2-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Add maintainers entry for the `pin-init` crate.
This crate is already being maintained by me, but until now there
existed two different versions: the version inside of the kernel tree
and a user-space version at [1]. The previous patches synchronized these
two versions to reduce the maintenance burden. In order to keep them
synchronized from now on, separate the maintenance from other Rust code.
Link: https://github.com/Rust-for-Linux/pin-init [1]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250308110339.2997091-23-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The pin-init crate is now compiled in a standalone fashion, so revert
the earlier commit that disabled the doctests in pin-init in order to
avoid build errors while transitioning the crate into a standalone
version.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-22-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add readme and contribution guidelines of the user-space version of
pin-init.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-21-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Remove the last differences between the kernel version and the
user-space version.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250308110339.2997091-20-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Synchronize the internal macros crate with the user-space version that
uses the quote crate [1] instead of a custom `quote!` macro. The imports
in the different version are achieved using `cfg` on the kernel config
value. This cfg is always set in the kernel and never set in the
user-space version.
Since the quote crate requires the proc_macro2 crate, imports also need
to be adjusted and `.into()` calls have to be inserted.
Link: https://crates.io/crates/quote [1]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@Kloenk.dev>
Link: https://lore.kernel.org/r/20250308110339.2997091-19-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
