summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-09lightnvm: combine 1.2 and 2.0 command flagsMatias Bjørling
Add nvm_set_flags helper to enable core to appropriately set the command flags for read/write/erase depending on which version a drive supports. The flags arguments can be distilled into the access hint, scrambling, and program/erase suspend. Replace the access hint with a "is_seq" parameter. The rest of the flags are dependent on the command opcode, which is trivial to detect and set. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-09lightnvm: remove dependencies on BLK_DEV_NVME and PCIMatias Bjørling
No need to force NVMe device driver to be compiled in if the lightnvm subsystem is selected. Also no need for PCI to be selected as well, as it would be selected by the device driver that hooks into the subsystem. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-09ALSA: hda - Fix headphone pin config for ASUS G751Takashi Iwai
BIOS on ASUS G751 doesn't seem to map the headphone pin (NID 0x16) correctly. Add a quirk to address it, as well as chaining to the previous fix for the microphone. Reported-by: Håvard <hovardslill@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-09ALSA: hda/ca0132 - Fix input effect controls for desktop cardsConnor McAdams
This patch removes the echo cancellation control for desktop cards, and makes use of the special 0x47 SCP command for noise reduction. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-09ALSA: hda/ca0132 - Add error checking in ca0132_build_controls()Connor McAdams
This patch adds error checking to functions creating controls inside of ca0132_build_controls(). Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-09ALSA: hda/ca0132 - Clean up patch_ca0132()Connor McAdams
This patch cleans up the patch_ca0132() function with suggestions from Takashi Sakamoto. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-09ALSA: hda/ca0132 - Fix microphone inconsistency issuesConnor McAdams
This patch fixes microphone inconsistency issues by adding a delay to each setup_defaults function. Without this, the microphone only works intermittently. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-09usb: xhci: pci: Enable Intel USB role mux on Apollo Lake platformsHeikki Krogerus
Intel Apollo Lake has the same internal USB role mux as Intel Cherry Trail. Cc: <stable@vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09usb: roles: intel_xhci: Fix Unbalanced pm_runtime_enableWan Ahmad Zainie
Add missing pm_runtime_disable() to remove(), in order to avoid an Unbalanced pm_runtime_enable when the module is removed and re-probed. Error log: root@intel-corei7-64:~# modprobe -r intel_xhci_usb_role_switch root@intel-corei7-64:~# modprobe intel_xhci_usb_role_switch intel_xhci_usb_sw intel_xhci_usb_sw: Unbalanced pm_runtime_enable! Fixes: cb2968468605 (usb: roles: intel_xhci: Enable runtime PM) Cc: <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09cdc-acm: correct counting of UART states in serial state notificationTobias Herzog
The usb standard ("Universal Serial Bus Class Definitions for Communication Devices") distiguishes between "consistent signals" (DSR, DCD), and "irregular signals" (break, ring, parity error, framing error, overrun). The bits of "irregular signals" are set, if this error/event occurred on the device side and are immeadeatly unset, if the serial state notification was sent. Like other drivers of real serial ports do, just the occurence of those events should be counted in serial_icounter_struct (but no 1->0 transitions). Signed-off-by: Tobias Herzog <t-herzog@gmx.de> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09cdc-acm: do not reset notification buffer index upon urb unlinkingTobias Herzog
Resetting the write index of the notification buffer on urb unlink (e.g. closing a cdc-acm device from userspace) may lead to wrong interpretation of further received notifications, in case the index is not 0 when urb unlink happens (i.e. when parts of a notification already have been transferred). On the device side there is no "reset" of the notification transimission and thus we would get out of sync with the device. Signed-off-by: Tobias Herzog <t-herzog@gmx.de> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09cdc-acm: fix race between reset and control messagingOliver Neukum
If a device splits up a control message and a reset() happens between the parts, the message is lost and already recieved parts must be dropped. Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 1aba579f3cf51 ("cdc-acm: handle read pipe errors") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09usb: usbip: Fix BUG: KASAN: slab-out-of-bounds in vhci_hub_control()Shuah Khan (Samsung OSG)
vhci_hub_control() accesses port_status array with out of bounds port value. Fix it to reference port_status[] only with a valid rhport value when invalid_rhport flag is true. The invalid_rhport flag is set early on after detecting in port value is within the bounds or not. The following is used reproduce the problem and verify the fix: C reproducer: https://syzkaller.appspot.com/x/repro.c?x=14ed8ab6400000 Reported-by: syzbot+bccc1fe10b70fadc78d0@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09selftests: usbip: add wait after attach and before checking port statusShuah Khan (Samsung OSG)
Add sleep between attach and "usbip port" check to make sure status is updated. Running attach and query back shows incorrect status. Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09usb/early: remove set but not used variable 'remain_length'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/usb/early/xhci-dbc.c: In function 'xdbc_handle_tx_event': drivers/usb/early/xhci-dbc.c:720:9: warning: variable 'remain_length' set but not used [-Wunused-but-set-variable] It never be used since introduction in commit aeb9dd1de98c ("usb/early: Add driver for xhci debug capability") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldocStephen Boyd
This must have been copy pasted from the function above. Fix it. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09usb: typec: tcpm: Report back negotiated PPS voltage and currentAdam Thomson
Currently when requesting a specific voltage or current through the psy interface, for PPS, when reading back from that interface the values will always be the same as previously given, if the request was successful. However PPS only allows for 20mV voltage steps and 50mA current steps, and the psy class expects microvolt and micro amp requests, so inbetween values can be provided through this interface. Really when reading back the true values negotiated should be given, and not the ones originally asked for. To report the actual values negotiated with the Source, the values stored are now rounded down to the relevant step units prior to building the PPS request, so that those values are later correctly reported through the psy interface. In addition this improves the adjustments made to meet the operating power requirements of the platform, which previously could have been slightly out due to not using valid PPS units of voltage and current. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09USB: core: remove set but not used variable 'udev'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/usb/core/driver.c: In function 'usb_driver_claim_interface': drivers/usb/core/driver.c:513:21: warning: variable 'udev' set but not used [-Wunused-but-set-variable] Since commit c183813fcee44a24 ("USB: remove LPM management from usb_driver_claim_interface()"), 'udev' is not used. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09usb: core: fix memory leak on port_dev_path allocationColin Ian King
Currently the allocation of port_dev_path from the call to kobject_get_path is not being kfree'd, causing a memory leak. Fix this by kfree'ing this at the end of the function. Add an extra error exit path to fix one of the early leaks when envp[0] fails to be allocated. Detected by CoverityScan, CID#1473771 ("Resource Leak") Fixes: 201af55da8a3 ("usb: core: added uevent for over-current") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09Revert "perf tools: Fix PMU term format max value calculation"Jiri Olsa
This reverts commit ac0e2cd555373ae6f8f3a3ad3fbbf5b6d1e7aaaa. Michael reported an issue with oversized terms values assignment and I noticed there was actually a misunderstanding of the max value check in the past. The above commit's changelog says: If bit 21 is set, there is parsing issues as below. $ perf stat -a -e uncore_qpi_0/event=0x200002,umask=0x8/ event syntax error: '..pi_0/event=0x200002,umask=0x8/' \___ value too big for format, maximum is 511 But there's no issue there, because the event value is distributed along the value defined by the format. Even if the format defines separated bit, the value is treated as a continual number, which should follow the format definition. In above case it's 9-bit value with last bit separated: $ cat uncore_qpi_0/format/event config:0-7,21 Hence the value 0x200002 is correctly reported as format violation, because it exceeds 9 bits. It should have been 0x102 instead, which sets the 9th bit - the bit 21 of the format. $ perf stat -vv -a -e uncore_qpi_0/event=0x102,umask=0x8/ Using CPUID GenuineIntel-6-2D ... ------------------------------------------------------------ perf_event_attr: type 10 size 112 config 0x200802 sample_type IDENTIFIER ... Reported-by: Michael Petlan <mpetlan@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: ac0e2cd55537 ("perf tools: Fix PMU term format max value calculation") Link: http://lkml.kernel.org/r/20181003072046.29276-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-09dma-direct: respect DMA_ATTR_NO_WARNChristoph Hellwig
Respect the DMA_ATTR_NO_WARN flags for allocations in dma-direct. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Robin Murphy <robin.murphy@arm.com>
2018-10-09dma-mapping: translate __GFP_NOFAIL to DMA_ATTR_NO_WARNChristoph Hellwig
This allows all dma_map_ops instances to entirely rely on DMA_ATTR_NO_WARN going forward. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Robin Murphy <robin.murphy@arm.com>
2018-10-09x86/hyperv: Enable PV qspinlock for Hyper-VYi Sun
Implement the required wait and kick callbacks to support PV spinlocks in Hyper-V guests. [ tglx: Document the requirement for disabling interrupts in the wait() callback. Remove goto and unnecessary includes. Add prototype for hv_vcpu_is_preempted(). Adapted to pending paravirt changes. ] Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com> Cc: chao.p.peng@intel.com Cc: chao.gao@intel.com Cc: isaku.yamahata@intel.com Cc: tianyu.lan@microsoft.com Link: https://lkml.kernel.org/r/1538987374-51217-3-git-send-email-yi.y.sun@linux.intel.com
2018-10-09x86/hyperv: Add GUEST_IDLE_MSR supportYi Sun
Hyper-V may expose a HV_X64_MSR_GUEST_IDLE MSR via HYPERV_CPUID_FEATURES. Reading this MSR triggers the host to transition the guest vCPU into an idle state. This state can be exited via an IPI even if the read in the guest happened from an interrupt disabled section. Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: chao.p.peng@intel.com Cc: chao.gao@intel.com Cc: isaku.yamahata@intel.com Cc: tianyu.lan@microsoft.com Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Link: https://lkml.kernel.org/r/1538028104-114050-2-git-send-email-yi.y.sun@linux.intel.com
2018-10-09gfs2: getlabel supportSteve Whitehouse
Add support for the GETFSLABEL ioctl in gfs2. I tested this patch and it works as expected. Signed-off-by: Steve Whitehouse <swhiteho@redhat.com> Tested-by: Abhi Das <adas@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-10-09GFS2: Flush the GFS2 delete workqueue before stopping the kernel threadsTim Smith
Flushing the workqueue can cause operations to happen which might call gfs2_log_reserve(), or get stuck waiting for locks taken by such operations. gfs2_log_reserve() can io_schedule(). If this happens, it will never wake because the only thing which can wake it is gfs2_logd() which was already stopped. This causes umount of a gfs2 filesystem to wedge permanently if, for example, the umount immediately follows a large delete operation. When this occured, the following stack trace was obtained from the umount command [<ffffffff81087968>] flush_workqueue+0x1c8/0x520 [<ffffffffa0666e29>] gfs2_make_fs_ro+0x69/0x160 [gfs2] [<ffffffffa0667279>] gfs2_put_super+0xa9/0x1c0 [gfs2] [<ffffffff811b7edf>] generic_shutdown_super+0x6f/0x100 [<ffffffff811b7ff7>] kill_block_super+0x27/0x70 [<ffffffffa0656a71>] gfs2_kill_sb+0x71/0x80 [gfs2] [<ffffffff811b792b>] deactivate_locked_super+0x3b/0x70 [<ffffffff811b79b9>] deactivate_super+0x59/0x60 [<ffffffff811d2998>] cleanup_mnt+0x58/0x80 [<ffffffff811d2a12>] __cleanup_mnt+0x12/0x20 [<ffffffff8108c87d>] task_work_run+0x7d/0xa0 [<ffffffff8106d7d9>] exit_to_usermode_loop+0x73/0x98 [<ffffffff81003961>] syscall_return_slowpath+0x41/0x50 [<ffffffff815a594c>] int_ret_from_sys_call+0x25/0x8f [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Tim Smith <tim.smith@citrix.com> Signed-off-by: Mark Syms <mark.syms@citrix.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-10-09printk: Give error on attempt to set log buffer length to over 2GHe Zhe
The current printk() is ready to handle log buffer size up to 2G. Give an explicit error for users who want to use larger log buffer. Also fix printk formatting to show the 2G as a positive number. Link: http://lkml.kernel.org/r/20181008135916.gg4kkmoki5bgtco5@pathway.suse.cz Cc: rostedt@goodmis.org Cc: linux-kernel@vger.kernel.org Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> [pmladek: Fixed to the really safe limit 2GB.] Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-10-09HID: elan: fix spelling mistake "registred" -> "registered"Colin Ian King
Trivial fix to spelling mistake in hid_err error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-10-09futex: Replace spin_is_locked() with lockdepLance Roy
lockdep_assert_held() is better suited for checking locking requirements, since it won't get confused when the lock is held by some other task. This is also a step towards possibly removing spin_is_locked(). Signed-off-by: Lance Roy <ldr709@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Paul E. McKenney" <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Link: https://lkml.kernel.org/r/20181003053902.6910-12-ldr709@gmail.com
2018-10-09ARM: KVM: Correctly order SGI register entries in the cp15 arrayMarc Zyngier
The ICC_ASGI1R and ICC_SGI0R register entries in the cp15 array are not correctly ordered, leading to a BUG() at boot time. Move them to their natural location. Fixes: 3e8a8a50c7ef ("KVM: arm: vgic-v3: Add support for ICC_SGI0R and ICC_ASGI1R accesses") Reported-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-09Input: ti_am335x_tsc: Mark IRQ as wakeup capableVignesh R
On AM335x, ti_am335x_tsc can wake up the system from suspend, mark the IRQ as wakeup capable, so that device irq is not disabled during system suspend. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-09iio: adc: ti_am335x_adc: Disable ADC during suspend unconditionallyVignesh R
Parent MFD device takes care of enabling ADC interface whenever touchscreen is marked wakeup capable. Therefore, unconditionally disable ADC interface during system suspend to save power in case of system with just ADC and no TSC. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-09mfd: ti_am335x_tscadc: Keep ADC interface on if child is wakeup capableVignesh R
If a child device like touchscreen is wakeup capable, then keep ADC interface on, so that a touching resistive screen will generate wakeup event to the system. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-09Input: ti_am335x_tsc: Mark TSC device as wakeup sourceVignesh R
Instead of TSCADC MFD device, mark TSC as wakeup source and change all wakeup related PM calls to operate on TSC device. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-09mfd: ti_am335x_tscadc: Don't mark TSCADC MFD as wakeup capableVignesh R
Currently tscadc MFD is marked as wakeup capable which incorrect because, its actually touch event by child TSC device that wakes up the system. Therefore, remove device_init_wakeup() call that marks TSCADC device as wakeup capable in favor of moving to mark TSC input device as wakeup capable later. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-09backlight: Remove ld9040 driverKrzysztof Kozlowski
The driver for LD9040 AMOLED LCD panel was superseded with DRM driver panel-samsung-ld9040.c. It does not support DeviceTree and respective possible user (Exynos4210 Universal C210) is DeviceTree-only and uses DRM version of driver. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Jingoo Han <jingoohan1@gmail.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-09backlight: Remove s6e63m0 driverKrzysztof Kozlowski
The driver for S6E63M0 AMOLED LCD panel is not used. It does not support DeviceTree and respective possible users (S5Pv210 Aquila and Goni boards) are DeviceTree-only. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Jingoo Han <jingoohan1@gmail.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-09backlight: lm3639: Unconditionally call led_classdev_unregisterNathan Chancellor
Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/video/backlight/lm3639_bl.c:403:14: warning: address of 'pchip->cdev_torch' will always evaluate to 'true' [-Wpointer-bool-conversion] if (&pchip->cdev_torch) ~~ ~~~~~~~^~~~~~~~~~ drivers/video/backlight/lm3639_bl.c:405:14: warning: address of 'pchip->cdev_flash' will always evaluate to 'true' [-Wpointer-bool-conversion] if (&pchip->cdev_flash) ~~ ~~~~~~~^~~~~~~~~~ 2 warnings generated. These statements have been present since 2012, introduced by commit 0f59858d5119 ("backlight: add new lm3639 backlight driver"). Given that they have been called unconditionally since then presumably without any issues, removing the always true if statements to fix the warnings without any real world changes. Link: https://github.com/ClangBuiltLinux/linux/issues/119 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-09backlight: pwm_bl: Switch to using "atomic" PWM APIEnric Balletbo i Serra
The "atomic" API allows us to configure PWM period and duty_cycle and enable it in one call. The patch also moves the pwm_init_state just before any use of the pwm_state struct, this fixes a potential bug where pwm_get_state can be called before pwm_init_state. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-09proc/vmcore: Fix i386 build error of missing copy_oldmem_page_encrypted()Borislav Petkov
Lianbo reported a build error with a particular 32-bit config, see Link below for details. Provide a weak copy_oldmem_page_encrypted() function which architectures can override, in the same manner other functionality in that file is supplied. Reported-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: x86@kernel.org Link: http://lkml.kernel.org/r/710b9d95-2f70-eadf-c4a1-c3dc80ee4ebb@redhat.com
2018-10-09s390/pkey: Define protected key blob formatIngo Franzki
Define a new protected key blob format. Protected key blobs use a type of 0x00, to be distinguished from other CCA key blobs. CCA defines type 0x00 as NULL key blob, but pkey will never use NULL keys anyway, so it is save to reuse this type. Using another so far undefined type value would introduce the risk that sometimes in the future CCA defines this so far unassigned type for a future key blob. Also add defines for the key token types and versions, and use them instead of hard coded hex values. Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/pkey: Introduce new API for random protected key generationIngo Franzki
This patch introduces a new ioctl API and in-kernel API to generate a random protected key. The protected key is generated in a way that the effective clear key is never exposed in clear. Both APIs are described in detail in the header files arch/s390/include/asm/pkey.h and arch/s390/include/uapi/asm/pkey.h. Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/zcrypt: add ap_adapter_mask sysfs attributeHarald Freudenberger
This patch provides a new sysfs attribute file /sys/bus/ap/ap_adapter_mask. This read-only attribute refrects the apm field as it is found in the PQAP(QCI) crypto info. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/zcrypt: provide apfs failure code on type 86 error replyHarald Freudenberger
The apfs field (AP final status) is set on transport protocol failures (reply code 0x90) for type 86 replies. For CCA cprbs this value is copied into the xcrb status field which gives userspace a hint for the failure reason. However, for EP11 cprbs there is no such status field in the xcrb struct. So now regardless of the request type, if a reply type 86 with transport protocol failure is seen, the apfs value is printed as part of the debug message. So the user has a chance to see the apfs value without using a special build kernel. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/zcrypt: zcrypt device driver cleanupHarald Freudenberger
Some cleanup in the s390 zcrypt device driver: - Removed fragments of pcixx crypto card code. This code can't be reached anymore because the hardware detection function does not recognize crypto cards < CEX2 since commit f56545430736 ("s390/zcrypt: Introduce QACT support for AP bus devices.") - Rename of some files and driver names which where still reflecting pcixx support to cex2a/cex2c. - Removed all the zcrypt version strings in the file headers. There is only one place left - the zcrypt.h header file is now the only place for zcrypt device driver version info. - Zcrypt version pump up from 2.2.0 to 2.2.1. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: add support for mem= kernel parameterVasily Gorbik
Handle mem= kernel parameter in kasan to limit physical memory. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: optimize kasan vmemmap allocationVasily Gorbik
Kasan implementation now supports memory hotplug operations. For that reason regions of initially standby memory are now skipped from shadow mapping and are mapped/unmapped dynamically upon bringing memory online/offline. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: avoid kasan crash with standby memory definedVasily Gorbik
Kasan early memory allocator simply chops off memory blocks from the end of the physical memory. Reuse mem_detect info to identify actual online memory end rather than using max_physmem_end. This allows to run the kernel with kasan enabled and standby memory defined. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/head: avoid doubling early boot stack size under KASANVasily Gorbik
Early boot stack uses predefined 4 pages of memory 0x8000-0xC000. This stack is used to run not instumented decompressor/facilities verification C code. It doesn't make sense to double its size when the kernel is built with KASAN support. BOOT_STACK_ORDER is introduced to avoid that. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/mm: improve debugfs ptdump markers walkingVasily Gorbik
This allows to print multiple markers when they happened to have the same value. ... 0x001bfffff0100000-0x001c000000000000 255M PMD I ---[ Kasan Shadow End ]--- ---[ vmemmap Area ]--- 0x001c000000000000-0x001c000002000000 32M PMD RW X ... Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit (git 2.34.1) at 2025-10-01 19:36:12 +0000