| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfiler, xfrm and bluetooth.
Oddly this includes a fix for a posix clock regression; in our
previous PR we included a change there as a pre-requisite for
networking one. That fix proved to be buggy and requires the follow-up
included here. Thomas suggested we should send it, given we sent the
buggy patch.
Current release - regressions:
- posix-clock: Fix unbalanced locking in pc_clock_settime()
- netfilter: fix typo causing some targets not to load on IPv6
Current release - new code bugs:
- xfrm: policy: remove last remnants of pernet inexact list
Previous releases - regressions:
- core: fix races in netdev_tx_sent_queue()/dev_watchdog()
- bluetooth: fix UAF on sco_sock_timeout
- eth: hv_netvsc: fix VF namespace also in synthetic NIC
NETDEV_REGISTER event
- eth: usbnet: fix name regression
- eth: be2net: fix potential memory leak in be_xmit()
- eth: plip: fix transmit path breakage
Previous releases - always broken:
- sched: deny mismatched skip_sw/skip_hw flags for actions created by
classifiers
- netfilter: bpf: must hold reference on net namespace
- eth: virtio_net: fix integer overflow in stats
- eth: bnxt_en: replace ptp_lock with irqsave variant
- eth: octeon_ep: add SKB allocation failures handling in
__octep_oq_process_rx()
Misc:
- MAINTAINERS: add Simon as an official reviewer"
* tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: dsa: mv88e6xxx: support 4000ps cycle counter period
net: dsa: mv88e6xxx: read cycle counter period from hardware
net: dsa: mv88e6xxx: group cycle counter coefficients
net: usb: qmi_wwan: add Fibocom FG132 0x0112 composition
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
net: dsa: microchip: disable EEE for KSZ879x/KSZ877x/KSZ876x
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime()
r8169: avoid unsolicited interrupts
net: sched: use RCU read-side critical section in taprio_dump()
net: sched: fix use-after-free in taprio_change()
net/sched: act_api: deny mismatched skip_sw/skip_hw flags for actions created by classifiers
net: usb: usbnet: fix name regression
mlxsw: spectrum_router: fix xa_store() error checking
virtio_net: fix integer overflow in stats
net: fix races in netdev_tx_sent_queue()/dev_watchdog()
net: wwan: fix global oob in wwan_rtnl_policy
netfilter: xtables: fix typo causing some targets not to load on IPv6
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
"Device-specific functionality quirks for Thinkpad X1 Gen3, Logitech
Bolt and some Goodix touchpads (Bartłomiej Maryńczak, Hans de Goede
and Kenneth Albanowski)"
* tag 'hid-for-linus-20241024' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: lenovo: Add support for Thinkpad X1 Tablet Gen 3 keyboard
HID: multitouch: Add quirk for Logitech Bolt receiver w/ Casa touchpad
HID: i2c-hid: Delayed i2c resume wakeup for 0x0d42 Goodix touchpad
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix DRM_I915_GVT_KVMGT dependencies in Kconfig
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZxniUlDg59RxOO-6@jlahtine-mobl.ger.corp.intel.com
|
|
The size of a.data_type is set abnormally large, causing shift-out-of-bounds.
To fix this, we need to add validation on a.data_type in
alloc_lru_idx_fragmentation().
Reported-by: syzbot+7f45fa9805c40db3f108@syzkaller.appspotmail.com
Fixes: 260af1562ec1 ("bcachefs: Kill alloc_v4.fragmentation_lru")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add check on layout->sb_max_size_bits against BCH_SB_LAYOUT_SIZE_BITS_MAX
to prevent UBSAN shift-out-of-bounds in validate_sb_layout().
Reported-by: syzbot+089fad5a3a5e77825426@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=089fad5a3a5e77825426
Fixes: 03ef80b469d5 ("bcachefs: Ignore unknown mount options")
Tested-by: syzbot+089fad5a3a5e77825426@syzkaller.appspotmail.com
Signed-off-by: Gianfranco Trad <gianf.trad@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This reverts commit 724a08450f74b02bd89078a596fd24857827c012.
This code simplification introduced significant regressions on servers
that do not remap inode numbers when exporting multiple underlying
filesystems with colliding inodes, as can be illustrated with simple
tmpfs exports in qemu with remapping disabled:
```
# host side
cd /tmp/linux-test
mkdir m1 m2
mount -t tmpfs tmpfs m1
mount -t tmpfs tmpfs m2
mkdir m1/dir m2/dir
echo foo > m1/dir/foo
echo bar > m2/dir/bar
# guest side
# started with -virtfs local,path=/tmp/linux-test,mount_tag=tmp,security_model=mapped-file
mount -t 9p -o trans=virtio,debug=1 tmp /mnt/t
ls /mnt/t/m1/dir
# foo
ls /mnt/t/m2/dir
# bar (works ok if directry isn't open)
# cd to keep first dir's inode alive
cd /mnt/t/m1/dir
ls /mnt/t/m2/dir
# foo (should be bar)
```
Other examples can be crafted with regular files with fscache enabled,
in which case I/Os just happen to the wrong file leading to
corruptions, or guest failing to boot with:
| VFS: Lookup of 'com.android.runtime' in 9p 9p would have caused loop
In theory, we'd want the servers to be smart enough and ensure they
never send us two different files with the same 'qid.path', but while
qemu has an option to remap that is recommended (and qemu prints a
warning if this case happens), there are many other servers which do
not (kvmtool, nfs-ganesha, probably diod...), we should at least ensure
we don't cause regressions on this:
- assume servers can't be trusted and operations that should get a 'new'
inode properly do so. commit d05dcfdf5e16 (" fs/9p: mitigate inode
collisions") attempted to do this, but v9fs_fid_iget_dotl() was not
called so some higher level of caching got in the way; this needs to be
fixed properly before we can re-apply the patches.
- if we ever want to really simplify this code, we will need to add some
negotiation with the server at mount time where the server could claim
they handle this properly, at which point we could optimize this out.
(but that might not be needed at all if we properly handle the 'new'
check?)
Fixes: 724a08450f74 ("fs/9p: simplify iget to remove unnecessary paths")
Reported-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/20240408141436.GA17022@redhat.com/
Link: https://lkml.kernel.org/r/20240923100508.GA32066@willie-the-truck
Cc: stable@vger.kernel.org # v6.9+
Message-ID: <20241024-revert_iget-v1-4-4cac63d25f72@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
This reverts commit 11763a8598f888dec631a8a903f7ada32181001f.
This is a requirement to revert commit 724a08450f74 ("fs/9p: simplify
iget to remove unnecessary paths"), see that revert for details.
Fixes: 724a08450f74 ("fs/9p: simplify iget to remove unnecessary paths")
Reported-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20240923100508.GA32066@willie-the-truck
Cc: stable@vger.kernel.org # v6.9+
Message-ID: <20241024-revert_iget-v1-3-4cac63d25f72@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
This reverts commit 10211b4a23cf4a3df5c11a10e5b3d371f16a906f.
This is a requirement to revert commit 724a08450f74 ("fs/9p: simplify
iget to remove unnecessary paths"), see that revert for details.
Fixes: 724a08450f74 ("fs/9p: simplify iget to remove unnecessary paths")
Reported-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20240923100508.GA32066@willie-the-truck
Cc: stable@vger.kernel.org # v6.9+
Message-ID: <20241024-revert_iget-v1-2-4cac63d25f72@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
This reverts commit d05dcfdf5e1659b2949d13060284eff3888b644e.
This is a requirement to revert commit 724a08450f74 ("fs/9p: simplify
iget to remove unnecessary paths"), see that revert for details.
Fixes: 724a08450f74 ("fs/9p: simplify iget to remove unnecessary paths")
Reported-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20240923100508.GA32066@willie-the-truck
Cc: stable@vger.kernel.org # v6.9+
Message-ID: <20241024-revert_iget-v1-1-4cac63d25f72@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.12-2024-10-23:
amdgpu:
- ACPI method handling fixes
- SMU 14.x fixes
- Display idle optimization fix
- DP link layer compliance fix
- SDMA 7.x fix
- PSR-SU fix
- SWSMU fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023180208.452636-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Get correct cores_per_package for SMT systems, enable IRQ if do_ale()
triggered in irq-enabled context, and fix some bugs about vDSO, memory
managenent, hrtimer in KVM, etc"
* tag 'loongarch-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Mark hrtimer to expire in hard interrupt context
LoongArch: Make KASAN usable for variable cpu_vabits
LoongArch: Set initial pte entry with PAGE_GLOBAL for kernel space
LoongArch: Don't crash in stack_top() for tasks without vDSO
LoongArch: Set correct size for vDSO code mapping
LoongArch: Enable IRQ if do_ale() triggered in irq-enabled context
LoongArch: Get correct cores_per_package for SMT systems
LoongArch: Use "Exception return address" to comment ERA
|
|
non-PCI device
The function cxl_endpoint_gather_bandwidth() invokes
pci_bus_read/write_XXX(), however, not all CXL devices are presently
implemented via PCI. It is recognized that the cxl_test has realized a CXL
device using a platform device.
Calling pci_bus_read/write_XXX() in cxl_test will cause kernel panic:
platform cxl_host_bridge.3: host supports CXL (restricted)
Oops: general protection fault, probably for non-canonical address 0x3ef17856fcae4fbd: 0000 [#1] PREEMPT SMP PTI
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? die_addr+0x38/0x60
? exc_general_protection+0x1f5/0x4b0
? asm_exc_general_protection+0x22/0x30
? pci_bus_read_config_word+0x1c/0x60
pcie_capability_read_word+0x93/0xb0
pcie_link_speed_mbps+0x18/0x50
cxl_pci_get_bandwidth+0x18/0x60 [cxl_core]
cxl_endpoint_gather_bandwidth.constprop.0+0xf4/0x230 [cxl_core]
? xas_store+0x54/0x660
? preempt_count_add+0x69/0xa0
? _raw_spin_lock+0x13/0x40
? __kmalloc_cache_noprof+0xe7/0x270
cxl_region_shared_upstream_bandwidth_update+0x9c/0x790 [cxl_core]
cxl_region_attach+0x520/0x7e0 [cxl_core]
store_targetN+0xf2/0x120 [cxl_core]
kernfs_fop_write_iter+0x13a/0x1f0
vfs_write+0x23b/0x410
ksys_write+0x53/0xd0
do_syscall_64+0x62/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
And Ying also reported a KASAN error with similar calltrace.
Reported-by: Huang, Ying <ying.huang@intel.com>
Closes: http://lore.kernel.org/87y12w9vp5.fsf@yhuang6-desk2.ccr.corp.intel.com
Fixes: a5ab0de0ebaa ("cxl: Calculate region bandwidth of targets with shared upstream link")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Huang, Ying <ying.huang@intel.com>
Link: https://patch.msgid.link/20241022030054.258942-1-lizhijian@fujitsu.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- objpool: Fix choosing allocation for percpu slots
Fixes to allocate objpool's percpu slots correctly according to the
GFP flag. It checks whether "any bit" in GFP_ATOMIC is set to choose
the vmalloc source, but it should check "all bits" in GFP_ATOMIC flag
is set, because GFP_ATOMIC is a combined flag.
- tracing/probes: Fix MAX_TRACE_ARGS limit handling
If more than MAX_TRACE_ARGS are passed for creating a probe event,
the entries over MAX_TRACE_ARG in trace_arg array are not
initialized. Thus if the kernel accesses those entries, it crashes.
This rejects creating event if the number of arguments is over
MAX_TRACE_ARGS.
- tracing: Consider the NUL character when validating the event length
A strlen() is used when parsing the event name, and the original code
does not consider the terminal null byte. Thus it can pass the name
one byte longer than the buffer. This fixes to check it correctly.
* tag 'probes-fixes-v6.12-rc4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Consider the NULL character when validating the event length
tracing/probes: Fix MAX_TRACE_ARGS limit handling
objpool: fix choosing allocation for percpu slots
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- mount option fixes:
- fix handling of compression mount options on remount
- reject rw remount in case there are options that don't work
in read-write mode (like rescue options)
- fix zone accounting of unusable space
- fix in-memory corruption when merging extent maps
- fix delalloc range locking for sector < page
- use more convenient default value of drop subtree threshold, clean
more subvolumes without the fallback to marking quotas inconsistent
- fix smatch warning about incorrect value passed to ERR_PTR
* tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix passing 0 to ERR_PTR in btrfs_search_dir_index_item()
btrfs: reject ro->rw reconfiguration if there are hard ro requirements
btrfs: fix read corruption due to race with extent map merging
btrfs: fix the delalloc range locking if sector size < page size
btrfs: qgroup: set a more sane default value for subtree drop threshold
btrfs: clear force-compress on remount when compress mount option is given
btrfs: zoned: fix zone unusable accounting for freed reserved extent
|
|
Pull jfs fix from David Kleikamp:
"Fix a regression introduced in 6.12-rc1"
* tag 'jfs-6.12-rc5' of github.com:kleikamp/linux-shaggy:
jfs: Fix sanity check in dbMount
|
|
Pull bcachefs fixes from Kent Overstreet:
"Lots of hotfixes:
- transaction restart injection has been shaking out a few things
- fix a data corruption in the buffered write path on -ENOSPC, found
by xfstests generic/299
- Some small show_options fixes
- Repair mismatches in inode hash type, seed: different snapshot
versions of an inode must have the same hash/type seed, used for
directory entries and xattrs. We were checking the hash seed, but
not the type, and a user contributed a filesystem where the hash
type on one inode had somehow been flipped; these fixes allow his
filesystem to repair.
Additionally, the hash type flip made some directory entries
invisible, which were then recreated by userspace; so the hash
check code now checks for duplicate non dangling dirents, and
renames one of them if necessary.
- Don't use wait_event_interruptible() in recovery: this fixes some
filesystems failing to mount with -ERESTARTSYS
- Workaround for kvmalloc not supporting > INT_MAX allocations,
causing an -ENOMEM when allocating the sorted array of journal
keys: this allows a 75 TB filesystem to mount
- Make sure bch_inode_unpacked.bi_snapshot is set in the old inode
compat path: this alllows Marcin's filesystem (in use since before
6.7) to repair and mount"
* tag 'bcachefs-2024-10-22' of https://github.com/koverstreet/bcachefs: (26 commits)
bcachefs: Set bch_inode_unpacked.bi_snapshot in old inode path
bcachefs: Mark more errors as AUTOFIX
bcachefs: Workaround for kvmalloc() not supporting > INT_MAX allocations
bcachefs: Don't use wait_event_interruptible() in recovery
bcachefs: Fix __bch2_fsck_err() warning
bcachefs: fsck: Improve hash_check_key()
bcachefs: bch2_hash_set_or_get_in_snapshot()
bcachefs: Repair mismatches in inode hash seed, type
bcachefs: Add hash seed, type to inode_to_text()
bcachefs: INODE_STR_HASH() for bch_inode_unpacked
bcachefs: Run in-kernel offline fsck without ratelimit errors
bcachefs: skip mount option handle for empty string.
bcachefs: fix incorrect show_options results
bcachefs: Fix data corruption on -ENOSPC in buffered write path
bcachefs: bch2_folio_reservation_get_partial() is now better behaved
bcachefs: fix disk reservation accounting in bch2_folio_reservation_get()
bcachefS: ec: fix data type on stripe deletion
bcachefs: Don't use commit_do() unnecessarily
bcachefs: handle restarts in bch2_bucket_io_time_reset()
bcachefs: fix restart handling in __bch2_resume_logged_op_finsert()
...
|
|
This reverts commit 1325e4a91a405f88f1b18626904d37860a4f9069.
using multipage folios apparently break some madvise operations like
MADV_PAGEOUT which do not reliably unload the specified page anymore,
Revert the patch until that is figured out.
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Fixes: 1325e4a91a40 ("9p: Enable multipage folios")
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The compiler is smart enough to insert a call to memset() in
riscv_vdso_get_cpus(), which generates a dynamic relocation.
So prevent this by using -fno-builtin option.
Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20241016083625.136311-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In case of parallel submissions multiple GuC id will point to the
same exec queue and on GT reset such exec queues will get restarted
multiple times which is not desirable.
v2: don't use exec_queue_enabled() which could race,
do the same for xe_guc_submit_stop (Matt B)
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2295
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022103555.731557-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit c8b0acd6d8745fd7e6450f5acc38f0227bd253b3)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
access_ok() only checks for addr overflow so also try to read the addr
to catch invalid addr sent from userspace.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1630
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016082304.66009-2-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 9408c4508483ffc60811e910a93d6425b8e63928)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
In some cases, when the driver attempts to read an MMIO register,
the hardware may return 0xFFFFFFFF. The current force wake path
code treats this as a valid response, as it only checks the BIT.
However, 0xFFFFFFFF should be considered an invalid value, indicating
a potential issue. To address this, we should add a log entry to
highlight this condition and return failure.
The force wake failure log level is changed from notice to err
to match the failure return value.
v2 (Matt Brost):
- set ret value (-EIO) to kick the error to upper layers
v3 (Rodrigo):
- add commit message for the log level promotion from notice to err
v4:
- update reviewed info
Suggested-by: Alex Zuo <alex.zuo@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Badal Nilawar <badal.nilawar@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017221547.1564029-1-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit a9fbeabe7226a3bf90f82d0e28a02c18e3c67447)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
In case if g2h worker doesn't get opportunity to within specified
timeout delay then flush the g2h worker explicitly.
v2:
- Describe change in the comment and add TODO (Matt B/John H)
- Add xe_gt_warn on fence done after G2H flush (John H)
v3:
- Updated the comment with root cause
- Clean up xe_gt_warn message (John H)
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1620
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2902
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017111410.2553784-2-badal.nilawar@intel.com
(cherry picked from commit e5152723380404acb8175e0777b1cea57f319a01)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
There are error messages like below that are occurring during stress
testing: "[ 31.004009] xe 0000:03:00.0: [drm] ERROR GT0: Global
invalidation timeout". Previously it was hitting this 3 out of 1000
executions of warm reboot. After raising it to 500, 1000 warm reboot
executions passed and it didn't fail.
Due to the way xe_mmio_wait32() is implemented, the timeout is able to
expire early when the register matches the expected value due to the
wait increments starting small. So, the larger timeout value should have
no effect during normal use cases.
v2 (Jonathan):
- rework the commit message
v3 (Lucas):
- add conclusive message for the fail rate and test case
v4:
- add suggested-by
Suggested-by: Jia Yao <jia.yao@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Tested-by: Zongyao Bai <zongyao.bai@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015161207.1373401-1-shuicheng.lin@intel.com
(cherry picked from commit 2eb460ab9f4bc5b575f52568d17936da0af681d8)
[ Fix conflict with gt->mmio ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Hou Tao says:
====================
Add the missing BPF_LINK_TYPE invocation for sockmap
From: Hou Tao <houtao1@huawei.com>
Hi,
The tiny patch set fixes the out-of-bound read problem when reading the
fdinfo of sock map link fd. And in order to spot such omission early for
the newly-added link type in the future, it also checks the validity of
the link->type and adds a WARN_ONCE() for missed invocation.
Please see individual patches for more details. And comments are always
welcome.
v3:
* patch #2: check and warn the validity of link->type instead of
adding a static assertion for bpf_link_type_strs array.
v2: http://lore.kernel.org/bpf/d49fa2f4-f743-c763-7579-c3cab4dd88cb@huaweicloud.com
====================
Link: https://lore.kernel.org/r/20241024013558.1135167-1-houtao@huaweicloud.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing
bpf_link_type_strs[link->type] may result in an out-of-bounds access.
To spot such missed invocations early in the future, checking the
validity of link->type in bpf_link_show_fdinfo() and emitting a warning
when such invocations are missed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241024013558.1135167-3-houtao@huaweicloud.com
|
|
There is an out-of-bounds read in bpf_link_show_fdinfo() for the sockmap
link fd. Fix it by adding the missing BPF_LINK_TYPE invocation for
sockmap link
Also add comments for bpf_link_type to prevent missing updates in the
future.
Fixes: 699c23f02c65 ("bpf: Add bpf_link support for sk_msg and sk_skb progs")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241024013558.1135167-2-houtao@huaweicloud.com
|
|
Fix incompatible function pointer type warnings in sched_ext BPF selftests by
explicitly casting the function pointers when initializing struct_ops.
This addresses multiple -Wincompatible-function-pointer-types warnings from the
clang compiler where function signatures didn't match exactly.
The void * cast ensures the compiler accepts the function pointer
assignment despite minor type differences in the parameters.
Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The iommu_paging_domain_alloc() function doesn't return NULL pointers,
it returns error pointers. Update the check to match.
Fixes: 45c690aea8ee ("drm/tegra: Use iommu_paging_domain_alloc()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba31cf3a-af3d-4ff1-87a8-f05aaf8c780b@stanley.mountain
|
|
When the nominal_freq recorded by the kernel is equal to the lowest_freq,
and the frequency adjustment operation is triggered externally, there is
a logic error in cppc_perf_to_khz()/cppc_khz_to_perf(), resulting in perf
and khz conversion errors.
Fix this by adding a branch processing logic when nominal_freq is equal
to lowest_freq.
Fixes: ec1c7ad47664 ("cpufreq: CPPC: Fix performance/frequency conversion")
Signed-off-by: liwei <liwei728@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20241024022952.2627694-1-liwei728@huawei.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Clang 19 prints a warning when we pass &th->guid to efi_pa_va_lookup():
drivers/acpi/prmt.c:156:29: error: passing 1-byte aligned argument to
4-byte aligned parameter 1 of 'efi_pa_va_lookup' may result in an
unaligned pointer access [-Werror,-Walign-mismatch]
156 | (void *)efi_pa_va_lookup(&th->guid, handler_info->handler_address);
| ^
The problem is that efi_pa_va_lookup() takes a efi_guid_t and &th->guid
is a regular guid_t. The difference between the two types is the
alignment. efi_guid_t is a typedef.
typedef guid_t efi_guid_t __aligned(__alignof__(u32));
It's possible that this a bug in Clang 19. Even though the alignment of
&th->guid is not explicitly specified, it will still end up being aligned
at 4 or 8 bytes.
Anyway, as Ard points out, it's cleaner to change guid to efi_guid_t type
and that also makes the warning go away.
Fixes: 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/3777d71b-9e19-45f4-be4e-17bf4fa7a834@stanley.mountain
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To pick up the changes from these csets:
dc1e67f70f6d4e33 ("KVM VMX: Move MSR_IA32_VMX_MISC bit defines to asm/vmx.h")
d7bfc9ffd58037ff ("KVM: VMX: Move MSR_IA32_VMX_BASIC bit defines to asm/vmx.h")
beb2e446046f8dd9 ("x86/cpu: KVM: Move macro to encode PAT value to common header")
e7e80b66fb242a63 ("x86/cpu: KVM: Add common defines for architectural memory types (PAT, MTRRs, etc.)")
That cause no changes to tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
To see how this works take a look at this previous update:
https://git.kernel.org/torvalds/c/174372668933ede5
174372668933ede5 ("tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING")
Just silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Please see tools/include/uapi/README for further details.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Xin Li <xin3.li@intel.com>
Link: https://lore.kernel.org/lkml/ZxpLSBzGin3vjs3b@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
p9_get_mapped_pages() uses iov_iter_get_pages_alloc2() to extract pages
from an iterator when performing a zero-copy request and under some
circumstances, this crashes with odd page errors[1], for example, I see:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbcf0
flags: 0x2000000000000000(zone=1)
...
page dumped because: VM_BUG_ON_FOLIO(((unsigned int) folio_ref_count(folio) + 127u <= 127u))
------------[ cut here ]------------
kernel BUG at include/linux/mm.h:1444!
This is because, unlike in iov_iter_extract_folioq_pages(), the
iter_folioq_get_pages() helper function doesn't skip the current folio
when iov_offset points to the end of it, but rather extracts the next
page beyond the end of the folio and adds it to the list. Reading will
then clobber the contents of this page, leading to system corruption,
and if the page is not in use, put_page() may try to clean up the unused
page.
This can be worked around by copying the iterator before each
extraction[2] and using iov_iter_advance() on the original as the
advance function steps over the page we're at the end of.
Fix this by skipping the page extraction if we're at the end of the
folio.
This was reproduced in the ktest environment[3] by forcing 9p to use the
fscache caching mode and then reading a file through 9p.
Fixes: db0aa2e9566f ("mm: Define struct folio_queue and ITER_FOLIOQ to handle a sequence of folios")
Reported-by: Antony Antony <antony@phenome.org>
Closes: https://lore.kernel.org/r/ZxFQw4OI9rrc7UYc@Antony2201.local/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/ZxFEi1Tod43pD6JC@moon.secunet.de/ [1]
Link: https://lore.kernel.org/r/2299159.1729543103@warthog.procyon.org.uk/ [2]
Link: https://github.com/koverstreet/ktest.git [3]
Tested-by: Antony Antony <antony.antony@secunet.com>
Link: https://lore.kernel.org/r/3327438.1729678025@warthog.procyon.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When rename moves an AFS subdirectory between parent directories, the
subdir also needs a bit of editing: the ".." entry needs updating to point
to the new parent (though I don't make use of the info) and the DV needs
incrementing by 1 to reflect the change of content. The server also sends
a callback break notification on the subdirectory if we have one, but we
can take care of recovering the promise next time we access the subdir.
This can be triggered by something like:
mount -t afs %example.com:xfstest.test20 /xfstest.test/
mkdir /xfstest.test/{aaa,bbb,aaa/ccc}
touch /xfstest.test/bbb/ccc/d
mv /xfstest.test/{aaa/ccc,bbb/ccc}
touch /xfstest.test/bbb/ccc/e
When the pathwalk for the second touch hits "ccc", kafs spots that the DV
is incorrect and downloads it again (so the fix is not critical).
Fix this, if the rename target is a directory and the old and new
parents are different, by:
(1) Incrementing the DV number of the target locally.
(2) Editing the ".." entry in the target to refer to its new parent's
vnode ID and uniquifier.
Link: https://lore.kernel.org/r/3340431.1729680010@warthog.procyon.org.uk
Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
cc: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The original debug path is under "/sys/modules", that's
wrong. The real path in kernel is "/sys/module". So we
can correct it.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20241022013812.2880883-1-lihongbo22@huawei.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Shenghao Yang says:
====================
net: dsa: mv88e6xxx: fix MV88E6393X PHC frequency on internal clock
The MV88E6393X family of switches can additionally run their cycle
counters using a 250MHz internal clock instead of the usual 125MHz
external clock [1].
The driver currently assumes all designs utilize that external clock,
but MikroTik's RB5009 uses the internal source - causing the PHC to be
seen running at 2x real time in userspace, making synchronization
with ptp4l impossible.
This series adds support for reading off the cycle counter frequency
known to the hardware in the TAI_CLOCK_PERIOD register and picking an
appropriate set of scaling coefficients instead of using a fixed set
for each switch family.
Patch 1 groups those cycle counter coefficients into a new structure to
make it easier to pass them around.
Patch 2 modifies PTP initialization to probe TAI_CLOCK_PERIOD and
use an appropriate set of coefficients.
Patch 3 adds support for 4000ps cycle counter periods.
Changes since v2 [2]:
- Patch 1: "net: dsa: mv88e6xxx: group cycle counter coefficients"
- Moved declaration of mv88e6xxx_cc_coeffs to avoid moving that in
Patch 2.
- Patch 2: "net: dsa: mv88e6xxx: read cycle counter period from hardware"
- Removed move of mv88e6xxx_cc_coeffs declaration.
- Patch 3: "net: dsa: mv88e6xxx: support 4000ps cycle counter periods"
- No change.
[1] https://lore.kernel.org/netdev/d6622575-bf1b-445a-b08f-2739e3642aae@lunn.ch/
[2] https://lore.kernel.org/netdev/20241006145951.719162-1-me@shenghaoyang.info/
====================
Link: https://patch.msgid.link/20241020063833.5425-1-me@shenghaoyang.info
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The MV88E6393X family of devices can run its cycle counter off
an internal 250MHz clock instead of an external 125MHz one.
Add support for this cycle counter period by adding another set
of coefficients and lowering the periodic cycle counter read interval
to compensate for faster overflows at the increased frequency.
Otherwise, the PHC runs at 2x real time in userspace and cannot be
synchronized.
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of relying on a fixed mapping of hardware family to cycle
counter frequency, pull this information from the
MV88E6XXX_TAI_CLOCK_PERIOD register.
This lets us support switches whose cycle counter frequencies depend on
board design.
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of having them as individual fields in ptp_ops, wrap the
coefficients in a separate struct so they can be referenced together.
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add Fibocom FG132 0x0112 composition:
T: Bus=03 Lev=02 Prnt=06 Port=01 Cnt=02 Dev#= 10 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0112 Rev= 5.15
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom Module
S: SerialNumber=xxxxxxxx
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Link: https://patch.msgid.link/ZxLKp5YZDy-OM0-e@arcor.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The existing code moves VF to the same namespace as the synthetic NIC
during netvsc_register_vf(). But, if the synthetic device is moved to a
new namespace after the VF registration, the VF won't be moved together.
To make the behavior more consistent, add a namespace check for synthetic
NIC's NETDEV_REGISTER event (generated during its move), and move the VF
if it is not in the same namespace.
Cc: stable@vger.kernel.org
Fixes: c0a41b887ce6 ("hv_netvsc: move VF to same namespace as netvsc device")
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1729275922-17595-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The well-known errata regarding EEE not being functional on various KSZ
switches has been refactored a few times. Recently the refactoring has
excluded several switches that the errata should also apply to.
Disable EEE for additional switches with this errata and provide
additional comments referring to the public errata document.
The original workaround for the errata was applied with a register
write to manually disable the EEE feature in MMD 7:60 which was being
applied for KSZ9477/KSZ9897/KSZ9567 switch ID's.
Then came commit 26dd2974c5b5 ("net: phy: micrel: Move KSZ9477 errata
fixes to PHY driver") and commit 6068e6d7ba50 ("net: dsa: microchip:
remove KSZ9477 PHY errata handling") which moved the errata from the
switch driver to the PHY driver but only for PHY_ID_KSZ9477 (PHY ID)
however that PHY code was dead code because an entry was never added
for PHY_ID_KSZ9477 via MODULE_DEVICE_TABLE.
This was apparently realized much later and commit 54a4e5c16382 ("net:
phy: micrel: add Microchip KSZ 9477 to the device table") added the
PHY_ID_KSZ9477 to the PHY driver but as the errata was only being
applied to PHY_ID_KSZ9477 it's not completely clear what switches
that relates to.
Later commit 6149db4997f5 ("net: phy: micrel: fix KSZ9477 PHY issues
after suspend/resume") breaks this again for all but KSZ9897 by only
applying the errata for that PHY ID.
Following that this was affected with commit 08c6d8bae48c("net: phy:
Provide Module 4 KSZ9477 errata (DS80000754C)") which removes
the blatant register write to MMD 7:60 and replaces it by
setting phydev->eee_broken_modes = -1 so that the generic phy-c45 code
disables EEE but this is only done for the KSZ9477_CHIP_ID (Switch ID).
Lastly commit 0411f73c13af ("net: dsa: microchip: disable EEE for
KSZ8567/KSZ9567/KSZ9896/KSZ9897.") adds some additional switches
that were missing to the errata due to the previous changes.
This commit adds an additional set of switches.
Fixes: 0411f73c13af ("net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241018160658.781564-1-tharvey@gateworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_core: Disable works on hci_unregister_dev
- SCO: Fix UAF on sco_sock_timeout
- ISO: Fix UAF on iso_sock_timeout
* tag 'for-net-2024-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
====================
Link: https://patch.msgid.link/20241023143005.2297694-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When ata_qc_complete() schedules a command for EH using
ata_qc_schedule_eh(), blk_abort_request() will be called, which leads to
req->q->mq_ops->timeout() / scsi_timeout() being called.
scsi_timeout(), if the LLDD has no abort handler (libata has no abort
handler), will set host byte to DID_TIME_OUT, and then call
scsi_eh_scmd_add() to add the command to EH.
Thus, when commands first enter libata's EH strategy_handler, all the
commands that have been added to EH will have DID_TIME_OUT set.
Commit e5dd410acb34 ("ata: libata: Clear DID_TIME_OUT for ATA PT commands
with sense data") clears this bogus DID_TIME_OUT flag for all commands
that reached libata's EH strategy_handler.
libata has its own flag (AC_ERR_TIMEOUT), that it sets for commands that
have not received a completion at the time of entering EH.
ata_eh_worth_retry() has no special handling for AC_ERR_TIMEOUT, so by
default timed out commands will get flag ATA_QCFLAG_RETRY set, and will be
retried after the port has been reset (ata_eh_link_autopsy() always
triggers a port reset if any command has AC_ERR_TIMEOUT set).
For a command that has ATA_QCFLAG_RETRY set, while also having an error
flag set (e.g. AC_ERR_TIMEOUT), ata_eh_finish() will not increment
scmd->allowed, so the command will at most be retried scmd->allowed number
of times (which by default is set to 3).
However, scsi_eh_flush_done_q() will only retry commands for which
scsi_noretry_cmd() returns false.
For a command that has DID_TIME_OUT set, while also having either the
FAILFAST flag set, or the command being a passthrough command,
scsi_noretry_cmd() will return true. Thus, such a command will never be
retried.
Thus, make sure that libata sets SCSI's DID_TIME_OUT flag for commands that
actually timed out (libata's AC_ERR_TIMEOUT flag), such that timed out
commands will once again not be retried if they are also a FAILFAST or
passthrough command.
Cc: stable@vger.kernel.org
Fixes: e5dd410acb34 ("ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data")
Reported-by: Lai, Yi <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/linux-ide/ZxYz871I3Blsi30F@ly-workstation/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241023105540.1070012-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-10-22
1) Fix routing behavior that relies on L4 information
for xfrm encapsulated packets.
From Eyal Birger.
2) Remove leftovers of pernet policy_inexact lists.
From Florian Westphal.
3) Validate new SA's prefixlen when the selector family is
not set from userspace.
From Sabrina Dubroca.
4) Fix a kernel-infoleak when dumping an auth algorithm.
From Petr Vaganov.
Please pull or let me know if there are problems.
ipsec-2024-10-22
* tag 'ipsec-2024-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix one more kernel-infoleak in algo dumping
xfrm: validate new SA's prefixlen using SA family when sel.family is unset
xfrm: policy: remove last remnants of pernet inexact list
xfrm: respect ip protocols rules criteria when performing dst lookups
xfrm: extract dst lookup parameters into a struct
====================
Link: https://patch.msgid.link/20241022092226.654370-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
An uncomfortably large set of fixes due to me not getting round to
sending them for longer than I should due to travel and illness. This
is mostly smaller driver specific changes, but there are a couple of
generic changes:
- Bumping the minimal topology ABI we check for during validation, the
code had support for v4 removed previously but the update of the
define used for initial validation was missed.
- Fix the assumption that DAPM structs will be embedded in a component
which isn't true for card widgets when doing name comparisons, though
fortunately this is rarely triggered.
We've pulled in one Soundwire fix which was part of a larger series
fixing cleanup issues in on Intel Soundwire systems.
|
|
We need `goto next_insn;` at the end of patching instead of `continue;`.
It currently works by accident by making verifier re-process patched
instructions.
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Fixes: 314a53623cd4 ("bpf: inline bpf_get_branch_snapshot() helper")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20241023161916.2896274-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
blk_rq_map_user_bvec contains a check bytes + bv->bv_len > nr_iter which
causes unnecessary failures in NVMe passthrough I/O, reproducible as
follows:
- register a 2 page, page-aligned buffer against a ring
- use that buffer to do a 1 page io_uring NVMe passthrough read
The second (i = 1) iteration of the loop in blk_rq_map_user_bvec will
then have nr_iter == 1 page, bytes == 1 page, bv->bv_len == 1 page, so
the check bytes + bv->bv_len > nr_iter will succeed, causing the I/O to
fail. This failure is unnecessary, as when the check succeeds, it means
we've checked the entire buffer that will be used by the request - i.e.
blk_rq_map_user_bvec should complete successfully. Therefore, terminate
the loop early and return successfully when the check bytes + bv->bv_len
> nr_iter succeeds.
While we're at it, also remove the check that all segments in the bvec
are single-page. While this seems to be true for all users of the
function, it doesn't appear to be required anywhere downstream.
CC: stable@vger.kernel.org
Signed-off-by: Xinyu Zhang <xizhang@purestorage.com>
Co-developed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Fixes: 37987547932c ("block: extend functionality to map bvec iterator")
Link: https://lore.kernel.org/r/20241023211519.4177873-1-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Noticed while building on a raspbian arm 32-bit system.
There was also this other case, fixed by adding a missing util/stat.h
with the prototypes:
/tmp/tmp.MbiSHoF3dj/perf-6.12.0-rc3/tools/perf/util/python.c:1396:6: error: no previous prototype for ‘perf_stat__set_no_csv_summary’ [-Werror=missing-prototypes]
1396 | void perf_stat__set_no_csv_summary(int set __maybe_unused)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/tmp.MbiSHoF3dj/perf-6.12.0-rc3/tools/perf/util/python.c:1400:6: error: no previous prototype for ‘perf_stat__set_big_num’ [-Werror=missing-prototypes]
1400 | void perf_stat__set_big_num(int set __maybe_unused)
| ^~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
In other architectures this must be building due to some lucky indirect
inclusion of that header.
Fixes: 9dabf4003423c8d3 ("perf python: Switch module to linking libraries from building source")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZxllAtpmEw5fg9oy@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add check for the return value of spi_get_csgpiod() to avoid passing a NULL
pointer to gpiod_direction_output(), preventing a crash when GPIO chip
select is not used.
Fix below crash:
[ 4.251960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 4.260762] Mem abort info:
[ 4.263556] ESR = 0x0000000096000004
[ 4.267308] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.272624] SET = 0, FnV = 0
[ 4.275681] EA = 0, S1PTW = 0
[ 4.278822] FSC = 0x04: level 0 translation fault
[ 4.283704] Data abort info:
[ 4.286583] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 4.292074] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 4.297130] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 4.302445] [0000000000000000] user address but active_mm is swapper
[ 4.308805] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 4.315072] Modules linked in:
[ 4.318124] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc4-next-20241023-00008-ga20ec42c5fc1 #359
[ 4.328130] Hardware name: LS1046A QDS Board (DT)
[ 4.332832] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 4.339794] pc : gpiod_direction_output+0x34/0x5c
[ 4.344505] lr : gpiod_direction_output+0x18/0x5c
[ 4.349208] sp : ffff80008003b8f0
[ 4.352517] x29: ffff80008003b8f0 x28: 0000000000000000 x27: ffffc96bcc7e9068
[ 4.359659] x26: ffffc96bcc6e00b0 x25: ffffc96bcc598398 x24: ffff447400132810
[ 4.366800] x23: 0000000000000000 x22: 0000000011e1a300 x21: 0000000000020002
[ 4.373940] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff
[ 4.381081] x17: ffff44740016e600 x16: 0000000500000003 x15: 0000000000000007
[ 4.388221] x14: 0000000000989680 x13: 0000000000020000 x12: 000000000000001e
[ 4.395362] x11: 0044b82fa09b5a53 x10: 0000000000000019 x9 : 0000000000000008
[ 4.402502] x8 : 0000000000000002 x7 : 0000000000000007 x6 : 0000000000000000
[ 4.409641] x5 : 0000000000000200 x4 : 0000000002000000 x3 : 0000000000000000
[ 4.416781] x2 : 0000000000022202 x1 : 0000000000000000 x0 : 0000000000000000
[ 4.423921] Call trace:
[ 4.426362] gpiod_direction_output+0x34/0x5c (P)
[ 4.431067] gpiod_direction_output+0x18/0x5c (L)
[ 4.435771] dspi_setup+0x220/0x334
Fixes: 9e264f3f85a5 ("spi: Replace all spi->chip_select and spi->cs_gpiod references with function call")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20241023203032.1388491-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Peter reported that perf_event_detach_bpf_prog might skip to release
the bpf program for -ENOENT error from bpf_prog_array_copy.
This can't happen because bpf program is stored in perf event and is
detached and released only when perf event is freed.
Let's drop the -ENOENT check and make sure the bpf program is released
in any case.
Fixes: 170a7e3ea070 ("bpf: bpf_prog_array_copy() should return -ENOENT if exclude_prog not found")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241023200352.3488610-1-jolsa@kernel.org
Closes: https://lore.kernel.org/lkml/20241022111638.GC16066@noisy.programming.kicks-ass.net/
|
