summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-21Merge branch 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds
* 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: drivers: video: msm: add include msm_mdp.h drivers: video: msm: default to no
2010-05-21Merge branch 'msm-mmc_sdcc' of ↵Linus Torvalds
git://codeaurora.org/quic/kernel/dwalker/linux-msm * 'msm-mmc_sdcc' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: drivers: mmc: msm_sdcc: Add EMBEDDED_SDIO support mmc: msm_sdcc: Fix issue where clocks could be disabled mid transaction mmc: msm_sdcc: Fix the dma exec function to use the proper delays mmc: msm_sdcc: Don't set host->curr.mrq until after we're sure the busclk timer won't fire mmc: msm_sdcc: Enable busclk idle timer for power savings mmc: msm_sdcc: Don't disable interrupts while suspending mmc: msm_sdcc: Fix issue where we might not end a sucessfull request mmc: msm_sdcc: Featurize busclock power save and disable it by default mmc: msm_sdcc: Fix bug where busclk expiry timer was not properly disabled mmc: msm_sdcc: Reduce command timeouts and improve reliability. mmc: msm_sdcc: Schedule clock disable after probe mmc: msm_sdcc: Wrap readl/writel calls with appropriate clk delays mmc: msm_sdcc: Driver clocking/irq improvements msm: Add 'execute' datamover callback mmc: msm_sdcc: Snoop SDIO_CCCR_ABORT register mmc: msm_sdcc: Clean up clock management and add a 10us delay after enabling clocks
2010-05-21MIPS: Use GCC __builtin_prefetch() to implement prefetch().David Daney
GCC's __builtin_prefetch() was introduced a long time ago, all supported GCC versions have it. Lets do what the big boys up in linux/prefetch.h do, except we use '1' as the third parameter to provoke 'PREF 0,...' and 'PREF 1,...' instead of other prefetch hints. This allows for better code generation. In theory the existing embedded asm could be optimized, but the compiler has these builtins, so there is really no point. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1235/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Octeon: Serial port fixes for OCTEON simulator.David Daney
For the simulator, fake a slow clock to get fast output. In prom_putchar we have to mask the value so the simulator doesn't ASSERT when printing non-ASCII characters. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1255/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Octeon: Get rid of early serial.David Daney
Get rid of early_serial_setup, we use CONFIG_EARLY_PRINTK instead. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1254/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: AR7: prevent race between clock initialization and devices registrationFlorian Fainelli
ar7_regiser_devices needs ar7_clocks_init to have been called first, however clock.o is currently linked later due to its order in the Makefile, therefore ar7_clocks_init always gets called later than ar7_register_devices because both have the same initcall level. Fix this by moving ar7_register_devices to the right initcall level. Reported-by: Michael J. Evans <mjevans1983@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Cc: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1212/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: AR7: use ar7_has_high_vlynq() to determine watchdog base addressFlorian Fainelli
Instead of doing yet another switch/case on the chip_id, use existing inline function to set the watchdog base address. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1211/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: BCM63xx: Avoid namespace clash on GPIO_DIR_{IN,OUT}Florian Fainelli
This is too generic a name, so prefix it with BCM63XX_ to avoid potential namespace clashes when including <asm/gpio.h>. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1171/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: MTX-1: Update defconfigFlorian Fainelli
Updates the 4G Systems MTX-1 defconfig, and remove systems unavailable on this platform. Changes include: - built-in MTD char/block support - GPIO sysfs support - MTX-1 watchdog driver - I2C over GPIO driver as a module - SquashFS support Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1168/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: BCM47xx: Update defconfigFlorian Fainelli
Update Broadcom BCM47xx defconfig with: - tiny RCU - BCM47xx watchdog driver - b43/b43legacy wireless as modules - SSB Gigabit Ethernet driver - disabled IRDA 6igned-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1167/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: RB532: Update defconfigFlorian Fainelli
This updates the Mikrotik RB532 defconfig with: - tiny RCU - RB532 input buttons driver - RB532 LED driver - RC32434 watchdog driver - GPIO sysfs support - Wireless support - SquashFS support - more LED triggers Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1166/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: AR7: Update defconfigFlorian Fainelli
Update Texas Instruments AR7 defconfig with: - tiny RCU - LEDs GPIO - disable SSB - enable zboot support - enable GPIO sysfs support Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1165/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21RTC: rtc-cmos: Fix binary mode supportArnaud Patard
As a follow-up to the thread about RTC support for some Loongson 2E/2F boards, this patch tries to address the "REVISIT"/"FIXME" comments about rtc binary mode handling and allow rtc to work with rtc in binary mode. I've also raised the message about 24-h mode not supported to warning otherwise, one may end up with no rtc without any message in the kernel log. Signed-off-by: Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org To: rtc-linux@googlegroups.com Cc: david-b@pacbell.net Cc: a.zummo@towertech.it Cc: akpm@linux-foundation.org Patchwork: http://patchwork.linux-mips.org/patch/1158/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Oprofile: Loongson: Cleanup the commentsWu Zhangjin
Removes some out-of-date comments and empty lines. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1204/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Oprofile: Loongson: Cleanup of the macrosWu Zhangjin
The _EXL, _KERNEL etc. bits are in the performance control register so use _PERFCTRL prefix instead of _PERFCNT. While at it make the macro more readable, use _ENABLE instead of _INT_EN suffix to describe the interrupt enable bit. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1203/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Oprofile: Loongson: Remove unused variable from loongson2_cpu_setup()Wu Zhangjin
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1202/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Oprofile: Loongson: Remove useless parenthesesWu Zhangjin
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1201/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Oprofile: Loongson: Unify macro for setting eventsWu Zhangjin
Unified macro for counter0 and counter1 to set the event in the control register. This will be needed by Perf. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1200/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: nofpu and nodsp only affect CPU0Kevin Cernekee
The "nofpu" and "nodsp" kernel command line options currently do not affect CPUs that are brought online later in the boot process or hotplugged at runtime. It is desirable to apply the nofpu/nodsp options to all CPUs in the system, so that surprising results are not seen when a process migrates from one CPU to another. [Ralf: Moved definitions of mips_fpu_disabled, fpu_disable, mips_dsp_disabled and dsp_disable from setup.c to cpu-probe.c to allow making mips_fpu_disabled and mips_dsp_disabled static.] Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1169/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Clean up tables for bootmem allocationDavid VomLehn
Modifications to the boot memory allocation structures to make them easier to read and maintain. Note that this will not pass checkpatch because it wants a structure element initializer to be enclosed in a do {...} while(...), which is obvious nonsensical. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Coding style cleanups of access of FCSR rounding mode bitsShane McDonald
Replaces references to the magic number 0x3 with constants and macros indicating the real purpose of those bits. They are the rounding mode bits of the FCSR register. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> To: anemo@mba.ocn.ne.jp To: kevink@paralogos.com To: linux-mips@linux-mips.org To: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/1206/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Loongson 2F: Add gpio/gpioilb supportArnaud Patard
Signed-off-by: Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1163/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Alchemy: add sysdev for DBDMA PM.Manuel Lauss
Add a sysdev for DBDMA PM. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1119/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Alchemy: add sysdev for IRQ PM.Manuel Lauss
Use a sysdev to implement PM methods for the Au1000 interrupt controllers. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1114/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Alchemy: Fix up residual devboard poweroff/reboot code.Manuel Lauss
Clean out stray unused board_reset() calls in pb1x boards, the PB1000 is different from the rest and gets private methods. (Cleanup after 32fd6901a6d8d19f94e4de6be4e4b552ab078620) Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1085/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Loongson: update cpu-feature-overrides.hWu Zhangjin
Loongson doesn't support MIPSR2, therefore, MIPSR2 vectored interrupts (cpu_has_vint) and MIPSR2 external interrupt controller mode (cpu_has_veic) are 0. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1112/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Use set_cpus_allowed_ptrJulia Lawall
From: Julia Lawall <julia@diku.dk> Use set_cpus_allowed_ptr rather than set_cpus_allowed. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1,E2; @@ - set_cpus_allowed(E1, cpumask_of_cpu(E2)) + set_cpus_allowed_ptr(E1, cpumask_of(E2)) @@ expression E; identifier I; @@ - set_cpus_allowed(E, I) + set_cpus_allowed_ptr(E, &I) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> To: peterz@infradead.org To: mingo@elte.hu To: tglx@linutronix.de To: oleg@redhat.com To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org To: kernel-janitors@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1087/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21Merge staging-next tree into Linus's latest versionGreg Kroah-Hartman
Conflicts: drivers/staging/arlan/arlan-main.c drivers/staging/comedi/drivers/cb_das16_cs.c drivers/staging/cx25821/cx25821-alsa.c drivers/staging/dt3155/dt3155_drv.c drivers/staging/hv/hv.c drivers/staging/netwave/netwave_cs.c drivers/staging/wavelan/wavelan.c drivers/staging/wavelan/wavelan_cs.c drivers/staging/wlags49_h2/wl_cs.c This required a bit of hand merging due to the conflicts that happened in the later .34-rc releases, as well as some staging driver changing coming in through other trees (v4l and pcmcia). Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21Merge branch 'master' into for-2.6.35Jens Axboe
Conflicts: fs/ext3/fsync.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21pipe: set lower and upper limit on max pages in the pipe page arrayJens Axboe
We need at least two to guarantee proper POSIX behaviour, so never allow a smaller limit than that. Also expose a /proc/sys/fs/pipe-max-pages sysctl file that allows root to define a sane upper limit. Make it default to 16 times the default size, which is 16 pages. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21pipe: add support for shrinking and growing pipesJens Axboe
This patch adds F_GETPIPE_SZ and F_SETPIPE_SZ fcntl() actions for growing and shrinking the size of a pipe and adjusts pipe.c and splice.c (and relay and network splice) usage to work with these larger (or smaller) pipes. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21drbd: This is now equivalent to drbd release 8.3.8rc1Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21drbd: Do not free p_uuid early, this is done in the exit code of the receiverPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21drbd: Null pointer deref fix to the large "multi bio rewrite"Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21drbd: Fix: Do not detach, if a bio with a barrier failsPhilipp Reisner
Introduced a few days ago: commit 45bb912bd5ea4d2b3a270a93cbdf767a0e2df6f5 Author: Lars Ellenberg <lars.ellenberg@linbit.com> Date: Fri May 14 17:10:48 2010 +0200 Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21drbd: Ensure to not trigger late-new-UUID creation multiple timesPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21drbd: Do not Oops when C_STANDALONE when uuid gets generatedPhilipp Reisner
Got introduces with commit 0c3f34516e8c5a1a0ba3585a7777d32bbbdf4ecb Author: Philipp Reisner <philipp.reisner@linbit.com> Date: Mon May 17 16:10:43 2010 +0200 drbd: Create new current UUID as late as possible Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21cfg80211: add missing bracesJohannes Berg
Specifying a valid channel type will get goto out rather than continuing, due to missing braces. This affects both remain on channel and action frame TX commands. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-21rndis_wlan: replace wireless_send_event with cfg80211_disconnectedJussi Kivilinna
Remove (hopefully) last use of WEXT in rndis_wlan. Replace wireless_send_event with missing cfg80211_disconnected in rndis_wlan_do_link_down_work. Reported-by: "Rogério Brito" <rbrito@ime.usp.br> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-21ath9k: remove AR9003 from PCI IDs for nowLuis R. Rodriguez
We tried to squeeze as much AR9003 support into this kernel release cycle but there are a few features which are still being tested and developed. Some of these features are critical to the stable operation of AR9003 so for now disable AR9003 support all together. This will get re-enabled once all necessary features are in place but very likely will not happen for 2.6.35. Reviewed-by: Don Breslin <don.breslin@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-21cfg80211: fix crash in cfg80211_set_freq()Felix Fietkau
Since wdev can be NULL, check it before dereferencing it Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-21wl1271: Fix RX data path frame lengthsJuuso Oikarinen
The current frame length used by the driver for RX frames is the SPI bus transfer length. This length has padding bytes, which do not belong to the WLAN frame. As there is no other length information in the WLAN frame except the skb length this problem caused for instance extra ESSID's to be listed at the end of scan results (IE id 0) with zero length. Fix the frame length by removing padding. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-21iwlwifi: fix internal scan raceReinette Chatre
It is possible for internal scan to race against itself if the device is not returning the scan results from first requests. What happens in this case is the cleanup done during the abort of the first internal scan also cleans up part of the new scan, causing it to access memory it shouldn't. Here are details: * First internal scan is triggered and scan command sent to device. * After seven seconds there is no scan results so the watchdog timer triggers a scan abort. * The scan abort succeeds and a SCAN_COMPLETE_NOTIFICATION is received for failed scan. * During processing of SCAN_COMPLETE_NOTIFICATION we clear STATUS_SCANNING and queue the "scan_completed" work. ** At this time, since the problem that caused the internal scan in first place is still present, a new internal scan is triggered. The behavior at this point is a bit different between 2.6.34 and 2.6.35 since 2.6.35 has a lot of this synchronized. The rest of the race description will thus be generalized. ** As part of preparing for the scan "is_internal_short_scan" is set to true. * At this point the completion work for fist scan is run. As part of this there is some locking missing around the "is_internal_short_scan" variable and it is set to "false". ** Now the second scan runs and it considers itself a real (not internal0 scan and thus causes problems with wrong memory being accessed. The fix is twofold. * Since "is_internal_short_scan" should be protected by mutex, fix this in scan completion work so that changes to it can be serialized. * Do not queue a new internal scan if one is in progress. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=15824 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-21cfg80211: Fix signal_type comparisonSujith
signal_type is enum cfg80211_signal_type. This fixes the gcc warning: scan.c: In function `cfg80211_inform_bss': scan.c:518:6: warning: comparison between `enum cfg80211_signal_type' and `enum nl80211_bss' scan.c: In function `cfg80211_inform_bss_frame': scan.c:574:6: warning: comparison between `enum cfg80211_signal_type' and `enum nl80211_bss' Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-21Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: BKL ioctl pushdown
2010-05-21Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (92 commits) powerpc: Remove unused 'protect4gb' boot parameter powerpc: Build-in e1000e for pseries & ppc64_defconfig powerpc/pseries: Make request_ras_irqs() available to other pseries code powerpc/numa: Use ibm,architecture-vec-5 to detect form 1 affinity powerpc/numa: Set a smaller value for RECLAIM_DISTANCE to enable zone reclaim powerpc: Use smt_snooze_delay=-1 to always busy loop powerpc: Remove check of ibm,smt-snooze-delay OF property powerpc/kdump: Fix race in kdump shutdown powerpc/kexec: Fix race in kexec shutdown powerpc/kexec: Speedup kexec hash PTE tear down powerpc/pseries: Add hcall to read 4 ptes at a time in real mode powerpc: Use more accurate limit for first segment memory allocations powerpc/kdump: Use chip->shutdown to disable IRQs powerpc/kdump: CPUs assume the context of the oopsing CPU powerpc/crashdump: Do not fail on NULL pointer dereferencing powerpc/eeh: Fix oops when probing in early boot powerpc/pci: Check devices status property when scanning OF tree powerpc/vio: Switch VIO Bus PM to use generic helpers powerpc: Avoid bad relocations in iSeries code powerpc: Use common cpu_die (fixes SMP+SUSPEND build) ...
2010-05-21Merge branch 'drm-for-2.6.35' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-for-2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (207 commits) drm/radeon/kms/pm/r600: select the mid clock mode for single head low profile drm/radeon: fix power supply kconfig interaction. drm/radeon/kms: record object that have been list reserved drm/radeon: AGP memory is only I/O if the aperture can be mapped by the CPU. drm/radeon/kms: don't default display priority to high on rs4xx drm/edid: fix typo in 1600x1200@75 mode drm/nouveau: fix i2c-related init table handlers drm/nouveau: support init table i2c device identifier 0x81 drm/nouveau: ensure we've parsed i2c table entry for INIT_*I2C* handlers drm/nouveau: display error message for any failed init table opcode drm/nouveau: fix init table handlers to return proper error codes drm/nv50: support fractional feedback divider on newer chips drm/nv50: fix monitor detection on certain chipsets drm/nv50: store full dcb i2c entry from vbios drm/nv50: fix suspend/resume with DP outputs drm/nv50: output calculated crtc pll when debugging on drm/nouveau: dump pll limits entries when debugging is on drm/nouveau: bios parser fixes for eDP boards drm/nouveau: fix a nouveau_bo dereference after it's been destroyed drm/nv40: remove some completed ctxprog TODOs ...
2010-05-21Merge branch 'dbg-early-merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'dbg-early-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: echi-dbgp: Add kernel debugger support for the usb debug port earlyprintk,vga,kdb: Fix \b and \r for earlyprintk=vga with kdb kgdboc: Add ekgdboc for early use of the kernel debugger x86,early dr regs,kgdb: Allow kernel debugger early dr register access x86,kgdb: Implement early hardware breakpoint debugging x86, kgdb, init: Add early and late debug states x86, kgdb: early trap init for early debug
2010-05-21Merge branch 'kdb-merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'kdb-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: (25 commits) kdb,debug_core: Allow the debug core to receive a panic notification MAINTAINERS: update kgdb, kdb, and debug_core info debug_core,kdb: Allow the debug core to process a recursive debug entry printk,kdb: capture printk() when in kdb shell kgdboc,kdb: Allow kdb to work on a non open console port kgdb: Add the ability to schedule a breakpoint via a tasklet mips,kgdb: kdb low level trap catch and stack trace powerpc,kgdb: Introduce low level trap catching x86,kgdb: Add low level debug hook kgdb: remove post_primary_code references kgdb,docs: Update the kgdb docs to include kdb kgdboc,keyboard: Keyboard driver for kdb with kgdb kgdb: gdb "monitor" -> kdb passthrough sparc,sunzilog: Add console polling support for sunzilog serial driver sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console code kgdb,8250,pl011: Return immediately from console poll kgdb: core changes to support kdb kdb: core for kgdb back end (2 of 2) kdb: core for kgdb back end (1 of 2) kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin ...
2010-05-21writeback: fix mixed up arguments to bdi_start_writeback()Jens Axboe
The laptop mode timer had the nr_pages and sb_locked arguments mixed up. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-13 14:48:20 +0000