summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-04Merge tag 'omap-for-v4.20/dt-signed-part2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt More devicetree changes for omap variants There's a patch for previously merged dts changes to remove the last remaining use of legacy phy_id property. For dra7, we have a non-urgent PCIe dts fix, enable a PCIe errata for unaligned access. For omap5, we enable omap5 USB OTG mode for DWC3 controller. And we add support for am335x based Moxa UC-2100 series of industrial computers. * tag 'omap-for-v4.20/dt-signed-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x: Replace remaining legacy phy_id with phy-handle ARM: dts: am335x: add support for Moxa UC-2101 open platform ARM: dts: am335x: add common file for UC-2100 series ARM: dts: omap5: enable OTG role for DWC3 controller ARM: dts: dra7: Enable workaround for errata i870 in PCIe host mode ARM: dts: dra7: Fix up unaligned access setting for PCIe EP Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-02Merge tag 'omap-for-v4.20/dt-signed-v2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Devicetree changes for omap variants This branch contains a series of improvments for omap3-gta04 phone, and a series of clean-up for am335x to remove the deprecated phy_id property. The rest is to configure am57xx-idk boards for leds, load trigger, and smps, am3517-evm audio configuration, beaglebone hdmi cec support, coresight binding update, and fixes for i2c and spi warnings. * tag 'omap-for-v4.20/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (70 commits) ARM: dts: add omap3-gta04a5one to Makefile ARM: dts: omap3-gta04: add pulldown/up settings for twl4030 gpio ARM: dts: am335x-boneblack: add cec support ARM: dts: am3517-evm: Add support for UI board and Audio ARM: dts: gta04: add serial console wakeup irq ARM: dts: am57xx-idk-common: Hook smps12 regulator as cpu vdd-supply ARM: dts: omap: Update coresight bindings for hardware ports ARM: dts: ti: Fix SPI and I2C bus warnings ARM: dts: dra62x-j5eco-evm: get rid of phy_id property ARM: dts: dm8148-t410: get rid of phy_id property ARM: dts: dm8148-evm: get rid of phy_id property ARM: dts: am57xx-cl-som-am57x: get rid of phy_id property ARM: dts: am57xx-idk-common: get rid of phy_id property ARM: dts: dra7-evm: get rid of phy_id property ARM: dts: dra71-evm: get rid of phy_id property ARM: dts: dra72-evm-revc: get rid of phy_id property ARM: dts: dra72-evm: get rid of phy_id property ARM: dts: dra76-evm: get rid of phy_id property ARM: dts: am437x-cm-t43: get rid of phy_id property ARM: dts: am437x-gp-evm: get rid of phy_id property ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-02Merge tag 'mvebu-dt64-4.20-1' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/dt mvebu dt64 for 4.20 (part 1) - Add watchdog node on Armada 37xx - Update PPv2 interrupts name - Add support for the SolidRun Clearfog GT 8K (Aramda 8040 based) - Add thermal-zone nodes for Aramda 7K/8K * tag 'mvebu-dt64-4.20-1' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: armada-37xx: add nodes to support watchdog arm64: dts: marvell: armada-cp110: describe more PPv2 interrupts arm64: dts: marvell: armada-cp110: change the PPv2 IRQ names arm64: dts: add support for SolidRun Clearfog GT 8K arm64: dts: marvell: add thermal-zone node in cp110 DTSI file arm64: dts: marvell: add macro to make distinction between node names arm64: dts: marvell: add thermal-zone node in ap806 DTSI file arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-02Merge tag 'mvebu-dt-4.20-1' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann
mvebu dt for 4.20 (part 1) - updates the armada-xp-98dx3236 SoC and related boards to use the new style dts bindings for nand - add db-88f6820-amc board: plugin card for some of Marvell's switch development kits - fix SPI and I2C bus warnings coming with the new checks in dtc - add new compatible string "marvell,prestera" to the armada-xp-98dx* - fix sdhci supply property name on the clearfog (the '-supply' suffix was missing) * tag 'mvebu-dt-4.20-1' of git://git.infradead.org/linux-mvebu: ARM: dts: clearfog: fix sdhci supply property name ARM: dts: mvebu: add "marvell,prestera" to PP nodes ARM: dts: marvell: Fix SPI and I2C bus warnings ARM: dts: mvebu: Add device tree for db-88f6820-amc board ARM: dts: mvebu: db-xc3-24g4: use new style nand binding ARM: dts: mvebu: db-dxbc2: use new style nand binding ARM: dts: mvebu: 98dx3236: Rename nand controller node Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-02Merge tag 'imx-dt64-4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Freescale arm64 device tree update for 4.20: - Add the second Dual UART device for LS208xA SoCs. - Add necessary big-endian property for NOR device on LS104xA based boards, remove unneeded big-endian property from IFC controller. - DTC has new checks for I2C and SPI buses to land into 4.20. A patch from Rob to fix the bus node names and warnings in unit-addresses. * tag 'imx-dt64-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: fsl: Fix I2C and SPI bus warnings arm64: dts: ls208xa: add second duart arm64: dts: fsl: remove big-endian field from IFC controller arm64: dts: Add big-endian in nor node for ls104xa Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-02Merge tag 'imx-dt-4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt i.MX device tree update for 4.20: - New board support: Engicam's i.Core MX6 CPU module v1.5; ConnectCore 6UL Single Board Computer (SBC) Pro; i.MX6 ULZ based EVK board. - Add Add SFF interface support for vf610-zii board. - Disable unneeded devices like VPU and internal watchdog for imx51-zii boards. - Add 'no-sdio' and 'no-sd' property for vf610-zii-cfu1 board. - Improve i.MX6 SLL GPIO support by adding gpio-ranges property and clocks information. - Update iomux header for i.MX7 Solo and i.MX6 ULL. - Enable GPIO buttons as wakeup source for imx7d-sdb and imx6sx-sdb. - Add GPIO keys and egalax touch screen support for imx6qdl-sabreauto. - Switch to use SPDX-License-Identifier for more boards - vf610-twr, imx7s-warp, Engicam boards. - Add device tree bindings of 'fsl,pmic-stby-poweroff' property and add the support for i.MX6 RIoTboard. - DTC has new checks for SPI buses which will be landed on 4.20. A patch from Rob to fix those 100+ warnings on i.MX boards. (Thanks!) - Switch i.MX7 device tree to use updated coresight binding for hardware ports. - Misc small or random update and cleanup. * tag 'imx-dt-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits) ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board ARM: dts: imx53-ppd: Remove 'num-chipselects' property ARM: dts: vf610-twr: Switch to SPDX identifier ARM: dts: vf: Switch to SPDX identifier ARM: dts: imx6qdl-zii-rdu2: Disable the internal RTC ARM: dts: imx51-zii-rdu1: Fix the rtc compatible string ARM: dts: imx6ul: use nvmem-cells for cpu speed grading ARM: dts: imx: Fix SPI bus warnings ARM: dts: imx7: Update coresight binding for hardware ports ARM: dts: vf610-zii-cfu1: Pass the 'no-sd' property ARM: dts: vf610-zii-cfu1: Pass the 'no-sdio' property ARM: dts: imx51-zii-scu2-mezz: Disable the internal watchdog ARM: dts: imx51-zii-scu2-mezz: Disable VPU ARM: dts: imx51-zii-scu3-esb: Disable VPU ARM: dts: imx51: Add label for VPU node ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro ARM: dts: imx6: RIoTboard provide standby on power off option dt-bindings: imx6q-clock: add new fsl,pmic-stby-poweroff property ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-02Merge tag 'qcom-dts-for-4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm Device Tree Changes for v4.20 * Fix IRQ constants usage on MSM8974 * Add led, gpio-button, sdcc, and pcie nodes for IPQ8064 * Move/cleanup common nodes for IPQ8064 * Add i2c sensor nodes for MSM8974 Hammerhead * Fixes for SAW, kpss, opp, pci range, and space/tab on IPQ4019 * Update coresight bindings * tag 'qcom-dts-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: qcom: Update coresight bindings for hardware ports ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value ARM: dts: qcom: ipq4019: fix space vs tab indenting inside qcom-ipq4019.dtsi ARM: dts: qcom: ipq4019: fix PCI range ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value ARM: dts: qcom: ipq4019: add cpu operating points for cpufreq support ARM: dts: qcom: ipq4019: use v2 of the kpss bringup mechanism ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515 ARM: dts: qcom: Add led and gpio-button nodes to ipq8064 boards ARM: dts: qcom: Move common nodes to ipq8064-v.1.0.dtsi ARM: dts: qcom: Add sdcc nodes for ipq8064 ARM: dts: qcom: Add pcie nodes for ipq8064 ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value ARM: dts: qcom-msm8974: use named constant for interrupt flag NONE ARM: dts: qcom-msm8974: use named constant for interrupt flag LEVEL HIGH ARM: dts: qcom-msm8974: use named constant for interrupt flag EDGE RISING ARM: dts: qcom-msm8974: use named constant for interrupt type GIC_SPI ARM: dts: qcom-msm8974: use named constant for interrupt type GIC_PPI Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-02Merge tag 'qcom-arm64-for-4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm ARM64 Updates for v4.20 * Update Coresight for MSM8916 * Switch to use mailbox for smp2p and smd on MSM8996 * Add dispcc, dsp, USB, regulator, and other nodes for SDM845 * Drop model/compatible from MSM8916 and MSM8996 * Add compat for db820c * Add MSM8998 SoC and board support along with associated nodes * Add RESIN/PON for Qualcomm PM8916 and PM8994 * tag 'qcom-arm64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (31 commits) Revert "dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'" Revert "dt-bindings: iio: vadc: Fix documentation of 'reg'" arm64: dts: msm8916: Update coresight bindings for hardware ports arm64: dts: msm8996: Transition smp2p and smd to mailbox arm64: dts: qcom: pm8998: Add pm8998 thermal zone arm64: dts: qcom: pm8998: Add spmi-temp-alarm node dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg' arm64: dts: sdm845: Add dispcc node arm64: dts: qcom: sdm845: Add adsp, cdsp and slpi smp2p arm64: dts: qcom: sdm845-mtp: Add nodes for USB arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators arm64: dts: qcom: sdm845: Add USB-related nodes arm64: dts: qcom: Add AOSS reset driver node for SDM845 arm64: dts: msm8996: Drop model arm64: dts: msm8916: Drop model and compatible arm64: dts: db820c: Add qcom,apq8096 to compatible string arm64: dts: qcom: Populate pm8998 with additional nodes arm64: dts: qcom: msm8998: Add smp2p nodes arm64: dts: qcom: msm8998: Add the qfprom node arm64: dts: qcom: msm8998: Add firmware node ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-02Merge tag 'actions-arm64-dt-for-4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt Actions Semi arm64 based SoC DT for v4.20 This updates SPDX headers for remaining files. For S900 it adds clock, pinctrl, i2c and dma nodes. S900 SPS is added via topic branch (shared with driver). For S700 it adds clock nodes. * tag 'actions-arm64-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: arm64: dts: actions: s700: Set UART clock references from CMU arm64: dts: actions: s700: Add Clock Management Unit arm64: dts: actions: s900: Add DMA Controller arm64: dts: actions: s900-bubblegum-96: Enable I2C1 and I2C2 arm64: dts: actions: s900: Add I2C controller nodes arm64: dts: actions: s900-bubblegum-96: Add gpio line names arm64: dts: actions: s900: Add gpio properties to pinctrl node arm64: dts: actions: s900: Add pinctrl node arm64: dts: actions: s900: Add SPS node arm64: dts: actions: s900: Source CMU clock for UARTs arm64: dts: actions: s900: Add Clock Management Unit nodes dt-bindings: power: Add Actions Semi S900 SPS arm64: dts: actions: Convert to new-style SPDX license identifiers Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-02Merge tag 'actions-arm-dt-for-4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt Actions Semi arm based SoC DT for v4.20 This updates SPDX headers for remaining files. * tag 'actions-arm-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: ARM: dts: owl: Convert to new-style SPDX license identifiers Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-02Merge tag 'v4.19-next-dts64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt mt2712 - add spi slave node mt7622: - add timer node - add CCI node - add PMU node - add bluetooth node - add SPI slave node - fix reference board (rfb1) memory and sort node alphabetically - add support for Bananapi-R64 * tag 'v4.19-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: Add spi slave dts arm64: dts: mt7622: add bananapi BPI-R64 board arm64: dts: mt7622: fix ram size for rfb1 arm64: dts: mt7622: add a bluetooth 5 device node arm64: dts: mt7622: add timer, CCI-400 and PMU nodes Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-02Merge tag 'sunxi-dt64-for-4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner arm64 DT changes for 4.20 Our usual set of DT changes for the arm64 Allwinner SoCs. The most notable things are: - HDMI support on the A64 - New boards: OrangePi One Plus * tag 'sunxi-dt64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (28 commits) arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI arm64: dts: allwinner: a64: Add display pipeline arm64: dts: allwinner: h6: add system controller device tree node arm64: dts: allwinner: h6: Add OrangePi One Plus initial support arm64: dts: allwinner: a64: Rename r_i2c_pins_a label to r_i2c_pl89_pins arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins arm64: dts: allwinner: a64: Split out data strobe pin from mmc2 pinmux arm64: dts: allwinner: a64: NanoPi-A64: Add blue status LED arm64: dts: allwinner: a64: NanoPi-A64: Add Wifi chip arm64: dts: allwinner: a64: NanoPi-A64: Add Ethernet arm64: dts: allwinner: a64: NanoPi-A64: Fix DCDC1 voltage arm64: dts: allwinner: a64: Olinuxino: enable USB arm64: dts: allwinner: a64: Olinuxino: add Ethernet nodes arm64: dts: allwinner: a64: Olinuxino: fix DRAM voltage arm64: dts: allwinner: a64: Orange Pi Win: Adjust CSI power rails arm64: dts: allwinner: a64: Orange Pi Win: Add SPI flash node arm64: dts: allwinner: a64: Orange Pi Win: Add SDIO node arm64: dts: allwinner: a64: Orange Pi Win: Add LED node arm64: dts: allwinner: a64: Orange Pi Win: Add UARTs ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-02Merge tag 'sunxi-dt-for-4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner DT changes for 4.20 Our usual bunch of DT patches for the Allwinner arm32 SoCs. The most notable changes are: - Support for the video decoding / encoding engine on the A10s/A13/A20/A33 - IR support for the A83t - SATA support for the R40 * tag 'sunxi-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun9i: Fix I2C bus warnings ARM: dts: sunxi: Fix I2C bus warnings ARM: dts: sun8i-a33: Add Video Engine and reserved memory nodes ARM: dts: sun7i-a20: Add Video Engine and reserved memory nodes ARM: dts: sun5i: Add Video Engine and reserved memory nodes ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI ARM: dts: sun8i: r40: add sata node ARM: dts: sunxi: Don't use cd-inverted in sun8i-r40-bananapi-m2-ultra ARM: dts: sun8i: a83t: bananapi-m3: Enable IR controller ARM: dts: sun8i: a83t: Add support for the cir interface ARM: dts: sun8i: a83t: Add the cir pin for the A83T Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-02Merge tag 'sunxi-h3-h5-for-4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner H3 and H5 DT additions for 4.20 This is our usual H3/H5 pull request The most notable changes are: - the video decoding / encoding unit is finally enabled on the H3 - Mali support for the H5 - New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support * tag 'sunxi-h3-h5-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees ARM: dts: sun8i-h3: Add Video Engine and reserved memory nodes arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5 ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus ARM: dts: sun8i: h3: bpi-m2-plus: Fix address for external RGMII Ethernet PHY ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block arm64: dts: allwinner: h5: Add device node for Mali-450 GPU ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 support nvmem: sunxi-sid: add support for H5's SID controller Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-30ARM: dts: qcom: Update coresight bindings for hardware portsSuzuki K Poulose
Switch to the new hardware port bindings for coresight Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-30Revert "dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'"Andy Gross
This reverts commit e704472616d7e185b839991b611a77711dbb22e3. Already picked up via Eduardo's thermal tree Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-30Revert "dt-bindings: iio: vadc: Fix documentation of 'reg'"Andy Gross
This reverts commit 7028cae1857cc2c6acc69586584e92d044027154. Already picked up via iio tree. Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-30arm64: dts: actions: s700: Set UART clock references from CMUSaravanan Sekar
Remove fixed clock in Cubieboard 7 and use Clock Management Unit clocks for all UART nodes in Actions Semi S700 SoC. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [AF: Moved/added to SoC] Signed-off-by: Andreas Färber <afaerber@suse.de>
2018-09-30arm64: dts: actions: s700: Add Clock Management UnitSaravanan Sekar
Add Clock Management Unit for Actions Semi S700 SoC. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2018-09-30arm64: dts: actions: s900: Add DMA ControllerManivannan Sadhasivam
Add DMA controller node for Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2018-09-30arm64: dts: actions: s900-bubblegum-96: Enable I2C1 and I2C2Manivannan Sadhasivam
Add pinctrl definitions for Actions Semiconductor S900 I2C controllers. Pinctrl definitions are only available for I2C0, I2C1, and I2C2. Enable I2C1 and I2C2 exposed on the low speed expansion connector in Bubblegum-96 board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [AF: Squashed] Signed-off-by: Andreas Färber <afaerber@suse.de>
2018-09-30arm64: dts: actions: s900: Add I2C controller nodesManivannan Sadhasivam
Add I2C controller nodes for Actions Semiconductor S900 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [AF: Squashed/added clocks, dropped pinctrl properties for now] Signed-off-by: Andreas Färber <afaerber@suse.de>
2018-09-30arm64: dts: actions: s900-bubblegum-96: Add gpio line namesManivannan Sadhasivam
Add gpio line names to Actions Semi S900 based Bubblegum-96 board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2018-09-30arm64: dts: actions: s900: Add gpio properties to pinctrl nodeManivannan Sadhasivam
Add gpio properties to pinctrl node for Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2018-09-30arm64: dts: actions: s900: Add pinctrl nodeManivannan Sadhasivam
Add pinctrl nodes for Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2018-09-30arm64: dts: actions: s900: Add SPS nodeManivannan Sadhasivam
Add Actions Semi S900 Smart Power System (SPS) node. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2018-09-30Merge branch 'v4.20/s900-sps-bindings' into v4.20/dt64Andreas Färber
This adds DT bindings for the S900 SPS. Signed-off-by: Andreas Färber <afaerber@suse.de>
2018-09-30arm64: dts: actions: s900: Source CMU clock for UARTsManivannan Sadhasivam
Remove fixed clock in Bubblegum-96 board and source CMU (Clock Management Unit) clock for UART nodes in Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [AF: Move/add clocks to SoC] Signed-off-by: Andreas Färber <afaerber@suse.de>
2018-09-30arm64: dts: actions: s900: Add Clock Management Unit nodesManivannan Sadhasivam
Add Actions Semi S900 Clock Management Unit (CMU) nodes. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2018-09-30dt-bindings: power: Add Actions Semi S900 SPSManivannan Sadhasivam
Define power domains for Actions Semi S900 SoC Smart Power System (SPS). Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2018-09-30ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk supportAnson Huang
i.MX6ULZ is new SoC of i.MX6 family, compared to i.MX6ULL, it removes below modules: - UART5/UART6/UART7/UART8; - PWM5/PWM6/PWM7/PWM8; - eCSPI3/eCSPI4; - CAN1/CAN2; - FEC1/FEC2; - I2C3/I2C4; - EPIT2; - LCDIF; - GPT2; - ADC1; - TSC; This patch adds support for i.MX6ULZ and i.MX6ULZ 14x14 EVK board. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-30dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK boardAnson Huang
This patch adds compatible for i.MX6ULZ 14x14 EVK board. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-30ARM: dts: imx53-ppd: Remove 'num-chipselects' propertyFabio Estevam
The 'num-chipselects' property is not a valid property according to Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt, so let's remove it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-30ARM: dts: vf610-twr: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-30ARM: dts: vf: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-29ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device treesChen-Yu Tsai
Bananapi released an updated revision of the H3/H5 based Bananapi M2+. Version 1.2 enables voltage control for the CPU's regulator by using a GPIO line to toggle a MOSFET that can change the effective resistance value in the regulator's feedback network. This patch adds a common .dtsi file for this new revision, which includes the original common sunxi-bananapi-m2-plus.dtsi file, and adds the GPIO-controlled regulator and a cpu-supply reference. H3 and H5 variant dts files are added as well. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-29ARM: dts: sun8i-h3: Add Video Engine and reserved memory nodesPaul Kocialkowski
This adds nodes for the Video Engine and the associated reserved memory for the H3. Up to 96 MiB of memory are dedicated to the CMA pool. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-09-29arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5Chen-Yu Tsai
The Bananapi M2 Plus H5 is a variant of the original Bananapi M2 Plus, with the H3 SoC replaced with an H5. Everything else is the same. Add a stub device tree incorporating the shared bananapi-m2-plus dtsi file. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-29ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 PlusChen-Yu Tsai
Three more variants of the Bananapi M2 Plus have been introduced. One with the H5 instead of the H3, another with the H2+ instead, and the last with the H3 but with WiFi and eMMC removed. All these variants use the same board. This patch splits out the non-SoC-specific parts of the device tree, so that they can be shared among all the variants. The original Bananapi M2 Plus has been renamed to Bananapi M2 Plus H3. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-29ARM: dts: sun8i: h3: bpi-m2-plus: Fix address for external RGMII Ethernet PHYChen-Yu Tsai
The external RTL8211E RGMII Ethernet PHY is configured via external resistors to use the address 0x1. The 0x0 address is a broadcast address for this family of PHYs, and should not be used explicitly. Fixes: 8c7ba536e709 ("ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i") Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-29ARM: dts: sun8i: h3-h5: ir register size should be the whole memory blockPhilipp Rossak
The size of the register should be the size of the whole memory block, not just the registers, that are needed. Signed-off-by: Philipp Rossak <embed3d@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-29arm64: dts: allwinner: h5: Add device node for Mali-450 GPUChen-Yu Tsai
The H5 has a Mali-450 GPU with 4 Pixel Processor cores. Interestingly, while the datasheet lists an interrupt line for the GPU's PMU, the hardware block itself doesn't seem to have it. Reads from the PMU address range all return zero, and writes are ignored. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-09-29ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 supportDiego Rondini
Orangepi Zero Plus 2 is an open-source single-board computer, available in two Allwinner SOC variants, H3 and H5. We add support for H3 variant here, as the H5 is already supported by sun50i-h5-orangepi-zero-plus2.dts. H3 Orangepi Zero Plus 2 has: - Quad-core Cortex-A7 - 512MB DDR3 - microSD slot and 8GB eMMC - Debug TTL UART - HDMI - Wifi + BT - OTG + power supply Signed-off-by: Diego Rondini <diego.rondini@kynetics.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-09-29nvmem: sunxi-sid: add support for H5's SID controllerEmmanuel Vadot
The H5 SoC have a SID controller that looks like the one in A64, the cells are in the same offset but doesn't contain the same data (thermal sensor calibration for example). Add a binding for it. Signed-off-by: Emmanuel Vadot <manu@freebsd.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-09-28arm64: dts: Add spi slave dtsLeilk Liu
This patch adds MT2712 spi slave into device tree. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-09-28ARM: dts: am335x: Replace remaining legacy phy_id with phy-handleTony Lindgren
Looks like we still have two instances of phy_handle that did not get update by Grygorii's series. Let's replace these too with standard phy-handle. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Neeraj Dantu <dantuguf14105@gmail.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28ARM: dts: am335x: add support for Moxa UC-2101 open platformSZ Lin (林上智)
Add support for Moxa UC-2101 open platform The UC-2101 computing platform is designed for industrial embedded data acquisition and processing applications. The features of UC-2101 are: * eMMC * SPI flash * 1x LAN * 1x RS-232/422/485 ports, software-selectable * EEPROM * TPM 2.0 * Watchdog * RTC * User gpio-keys * User LEDs * User button Signed-off-by: Wes Huang (黃淵河) <wes.huang@moxa.com> Signed-off-by: Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28ARM: dts: am335x: add common file for UC-2100 seriesSZ Lin (林上智)
The UC-2100 series consists many boards with different peripheral devices and wireless modules, hence we fetch common items and create a common dtsi file to increase reusability. All boards in UC-2100 series will include this common dtsi file. Signed-off-by: Wes Huang (黃淵河) <wes.huang@moxa.com> Signed-off-by: Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28ARM: dts: omap5: enable OTG role for DWC3 controllerH. Nikolaus Schaller
Since SMPS10 and OTG cable detection extcon are described here, and work to enable OTG power when an OTG cable is plugged in, we can define OTG mode in the controller (which is disabled by default in omap5.dtsi). Tested on OMAP5EVM and Pyra. Suggested-by: Roger Quadros <rogerq@ti.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28ARM: dts: dra7: Enable workaround for errata i870 in PCIe host modeVignesh R
Add ti,syscon-unaligned-access property to PCIe RC nodes to set appropriate bits in CTRL_CORE_SMA_SW_7 register to enable workaround for errata i870. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2025-09-18 06:28:43 +0000