summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-07ARM: dts: NSP: Add dma-coherent to relevant DT entriesJon Mason
Cache related issues with DMA rings and performance issues related to caching are being caused by not properly setting the "dma-coherent" flag in the device tree entries. Adding it here to correct the issue. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Fixes: 3107fa5bcfb2 ("ARM: dts: NSP: Add SD/MMC support") Fixes: 13d04f20935c ("ARM: dts: NSP: Add AMAC entries") Fixes: 5aeda7bf8a1e ("ARM: dts: NSP: Add and enable amac2") Fixes: 17d517172300 ("ARM: dts: NSP: Add mailbox (PDC) to NSP") Fixes: 1d8ece6639e1 ("ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree") Fixes: 0f9f27a36d09 ("ARM: dts: NSP: Add I2C support to the DT") Fixes: 8dbcad020f2e ("ARM: dts: nsp: Add sata device tree entry") Fixes: 522199029fdc ("ARM: dts: NSP: Fix PCIE DT issue") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-08-07ARM: dts: keystone-k2g-evm: Enable MMC0 and MMC1Lokesh Vutla
Enable MMC0 which is used for micro SD and MMC1 which is used for the on board EMMC. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [fcooper@ti.com: add mmc1, bufferclass and pullup/pulldown settings] Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> [nsekhar@ti.com: add card detect GPIO support] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-08-07ARM: dts: keystone-k2g: add MMC0 and MMC1 nodesLokesh Vutla
Add device tree nodes for MMC0 and MMC1 pesent on 66AK2G device. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [nsekhar@ti.com: fix clock-names for mmc1 node] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-08-07ARM: dts: keystone-k2g: Add eDMA nodesPeter Ujfalusi
Add nodes for eDMA0 and eDMA1. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-08-07dt-bindings: ti,omap-hsmmc: Add 66AK2G mmc controllerLokesh Vutla
Update the ti,omap-hsmmc.txt to include information about 66AK2G specific mmc controller. Also cleanup the entries under optional properties to look a bit nicer. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-08-07dt-bindings: ti,edma: Add 66AK2G specific informationLokesh Vutla
Update ti,edma binding documentation to reflect 66AK2G specific properties. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-08-07ARM: dts: keystone-k2g: Add gpio nodesKeerthy
66AK2G has 2 instances of gpio. The first one has all the 144 GPIOs functional. 9 banks with 16 gpios making a total of 144. The second instance has only the GPIO0:GPIO67 functional and rest are marked reserved. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-08-06Linux 4.13-rc4Linus Torvalds
2017-08-06Merge tag 'platform-drivers-x86-v4.13-4' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fix from Darren Hart: "Fix loop preventing some platforms from waking up via the power button in s2idle: - intel-vbtn: match power button on press rather than release" * tag 'platform-drivers-x86-v4.13-4' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: intel-vbtn: match power button on press rather than release
2017-08-06Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "A large number of ext4 bug fixes and cleanups for v4.13" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix copy paste error in ext4_swap_extents() ext4: fix overflow caused by missing cast in ext4_resize_fs() ext4, project: expand inode extra size if possible ext4: cleanup ext4_expand_extra_isize_ea() ext4: restructure ext4_expand_extra_isize ext4: fix forgetten xattr lock protection in ext4_expand_extra_isize ext4: make xattr inode reads faster ext4: inplace xattr block update fails to deduplicate blocks ext4: remove unused mode parameter ext4: fix warning about stack corruption ext4: fix dir_nlink behaviour ext4: silence array overflow warning ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize ext4: release discard bio after sending discard commands ext4: convert swap_inode_data() over to use swap() on most of the fields ext4: error should be cleared if ea_inode isn't added to the cache ext4: Don't clear SGID when inheriting ACLs ext4: preserve i_mode if __ext4_set_acl() fails ext4: remove unused metadata accounting variables ext4: correct comment references to ext4_ext_direct_IO()
2017-08-06Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "This fixes two build issues for ralink platforms, both due to missing #includes which used to be included indirectly via other headers" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: mt7620: Add missing header MIPS: ralink: Fix build error due to missing header
2017-08-06Fix compat_sys_sigpending breakageDmitry V. Levin
The latest change of compat_sys_sigpending in commit 8f13621abced ("sigpending(): move compat to native") has broken it in two ways. First, it tries to write 4 bytes more than userspace expects: sizeof(old_sigset_t) == sizeof(long) == 8 instead of sizeof(compat_old_sigset_t) == sizeof(u32) == 4. Second, on big endian architectures these bytes are being written in the wrong order. This bug was found by strace test suite. Reported-by: Anatoly Pugachev <matorola@gmail.com> Inspired-by: Eugene Syromyatnikov <evgsyr@gmail.com> Fixes: 8f13621abced ("sigpending(): move compat to native") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-06ext4: fix copy paste error in ext4_swap_extents()Maninder Singh
This bug was found by a static code checker tool for copy paste problems. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-06ext4: fix overflow caused by missing cast in ext4_resize_fs()Jerry Lee
On a 32-bit platform, the value of n_blcoks_count may be wrong during the file system is resized to size larger than 2^32 blocks. This may caused the superblock being corrupted with zero blocks count. Fixes: 1c6bd7173d66 Signed-off-by: Jerry Lee <jerrylee@qnap.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org # 3.7+
2017-08-06ext4, project: expand inode extra size if possibleMiao Xie
When upgrading from old format, try to set project id to old file first time, it will return EOVERFLOW, but if that file is dirtied(touch etc), changing project id will be allowed, this might be confusing for users, we could try to expand @i_extra_isize here too. Reported-by: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Wang Shilong <wshilong@ddn.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-06ext4: cleanup ext4_expand_extra_isize_ea()Miao Xie
Clean up some goto statement, make ext4_expand_extra_isize_ea() clearer. Signed-off-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Wang Shilong <wshilong@ddn.com>
2017-08-06ext4: restructure ext4_expand_extra_isizeMiao Xie
Current ext4_expand_extra_isize just tries to expand extra isize, if someone is holding xattr lock or some check fails, it will give up. So rename its name to ext4_try_to_expand_extra_isize. Besides that, we clean up unnecessary check and move some relative checks into it. Signed-off-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Wang Shilong <wshilong@ddn.com>
2017-08-06ext4: fix forgetten xattr lock protection in ext4_expand_extra_isizeMiao Xie
We should avoid the contention between the i_extra_isize update and the inline data insertion, so move the xattr trylock in front of i_extra_isize update. Signed-off-by: Miao Xie <miaoxie@huawei.com> Reviewed-by: Wang Shilong <wshilong@ddn.com>
2017-08-06ext4: make xattr inode reads fasterTahsin Erdogan
ext4_xattr_inode_read() currently reads each block sequentially while waiting for io operation to complete before moving on to the next block. This prevents request merging in block layer. Add a ext4_bread_batch() function that starts reads for all blocks then optionally waits for them to complete. A similar logic is used in ext4_find_entry(), so update that code to use the new function. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-05ext4: inplace xattr block update fails to deduplicate blocksTahsin Erdogan
When an xattr block has a single reference, block is updated inplace and it is reinserted to the cache. Later, a cache lookup is performed to see whether an existing block has the same contents. This cache lookup will most of the time return the just inserted entry so deduplication is not achieved. Running the following test script will produce two xattr blocks which can be observed in "File ACL: " line of debugfs output: mke2fs -b 1024 -I 128 -F -O extent /dev/sdb 1G mount /dev/sdb /mnt/sdb touch /mnt/sdb/{x,y} setfattr -n user.1 -v aaa /mnt/sdb/x setfattr -n user.2 -v bbb /mnt/sdb/x setfattr -n user.1 -v aaa /mnt/sdb/y setfattr -n user.2 -v bbb /mnt/sdb/y debugfs -R 'stat x' /dev/sdb | cat debugfs -R 'stat y' /dev/sdb | cat This patch defers the reinsertion to the cache so that we can locate other blocks with the same contents. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
2017-08-05ext4: remove unused mode parameterTahsin Erdogan
ext4_alloc_file_blocks() does not use its mode parameter. Remove it. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-05ext4: fix warning about stack corruptionArnd Bergmann
After commit 62d1034f53e3 ("fortify: use WARN instead of BUG for now"), we get a warning about possible stack overflow from a memcpy that was not strictly bounded to the size of the local variable: inlined from 'ext4_mb_seq_groups_show' at fs/ext4/mballoc.c:2322:2: include/linux/string.h:309:9: error: '__builtin_memcpy': writing between 161 and 1116 bytes into a region of size 160 overflows the destination [-Werror=stringop-overflow=] We actually had a bug here that would have been found by the warning, but it was already fixed last year in commit 30a9d7afe70e ("ext4: fix stack memory corruption with 64k block size"). This replaces the fixed-length structure on the stack with a variable-length structure, using the correct upper bound that tells the compiler that everything is really fine here. I also change the loop count to check for the same upper bound for consistency, but the existing code is already correct here. Note that while clang won't allow certain kinds of variable-length arrays in structures, this particular instance is fine, as the array is at the end of the structure, and the size is strictly bounded. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-05ext4: fix dir_nlink behaviourAndreas Dilger
The dir_nlink feature has been enabled by default for new ext4 filesystems since e2fsprogs-1.41 in 2008, and was automatically enabled by the kernel for older ext4 filesystems since the dir_nlink feature was added with ext4 in kernel 2.6.28+ when the subdirectory count exceeded EXT4_LINK_MAX-1. Automatically adding the file system features such as dir_nlink is generally frowned upon, since it could cause the file system to not be mountable on older kernel, thus preventing the administrator from rolling back to an older kernel if necessary. In this case, the administrator might also want to disable the feature because glibc's fts_read() function does not correctly optimize directory traversal for directories that use st_nlinks field of 1 to indicate that the number of links in the directory are not tracked by the file system, and could fail to traverse the full directory hierarchy. Fortunately, in the past ten years very few users have complained about incomplete file system traversal by glibc's fts_read(). This commit also changes ext4_inc_count() to allow i_nlinks to reach the full EXT4_LINK_MAX links on the parent directory (including "." and "..") before changing i_links_count to be 1. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196405 Signed-off-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-05ext4: silence array overflow warningDan Carpenter
I get a static checker warning: fs/ext4/ext4.h:3091 ext4_set_de_type() error: buffer overflow 'ext4_type_by_mode' 15 <= 15 It seems unlikely that we would hit this read overflow in real life, but it's also simple enough to make the array 16 bytes instead of 15. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-05ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesizeJan Kara
ext4_find_unwritten_pgoff() does not properly handle a situation when starting index is in the middle of a page and blocksize < pagesize. The following command shows the bug on filesystem with 1k blocksize: xfs_io -f -c "falloc 0 4k" \ -c "pwrite 1k 1k" \ -c "pwrite 3k 1k" \ -c "seek -a -r 0" foo In this example, neither lseek(fd, 1024, SEEK_HOLE) nor lseek(fd, 2048, SEEK_DATA) will return the correct result. Fix the problem by neglecting buffers in a page before starting offset. Reported-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> CC: stable@vger.kernel.org # 3.8+
2017-08-05platform/x86: intel-vbtn: match power button on press rather than releaseMario Limonciello
This fixes a problem where the system gets stuck in a loop unable to wakeup via power button in s2idle. The problem happens because: - press power button: - system emits 0xc0 (power press), event ignored - system emits 0xc1 (power release), event processed, emited as KEY_POWER - set wakeup_mode to true - system goes to s2idle - press power button - system emits 0xc0 (power press), wakeup_mode is true, system wakes - system emits 0xc1 (power release), event processed, emited as KEY_POWER - system goes to s2idle again To avoid this situation, process the presses (which matches what intel-hid does too). Verified on an Dell XPS 9365 Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-05Merge tag 'media/v4.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "This series is larger than I would like to submit for -rc4. My original intent were to sent it to either -rc2 or -rc3. Unfortunately, due to my vacations, I got a lot of pending stuff after my return, and had to do some biz trips, with prevented me to send this earlier. Several fixes: - some fixes at atomisp staging driver - several gcc 7 warning fixes - cleanup media SVG files, in order to fix PDF build on some distros - fix random Kconfig build of venus driver - some fixes for the venus driver - some changes from semaphone to mutex in ngene's driver - some locking fixes at dib0700 driver - several fixes on ngene's driver and frontends to make it properly support some new boards added on Kernel 4.13 - some fixes to CEC drivers - omap_vout: vrfb: convert to dmaengine - docs-rst: document EBUSY for VIDIOC_S_FMT Please notice that the big diffstat changes here are at the SVG files. Visually, the images look the same, but the file size is now a lot smaller than before, and they don't use some XML tags that would cause them to be badly parsed by some ImageMagick versions, or to require a lot of memory by TeTex, with would break PDF output on some distributions" * tag 'media/v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (68 commits) media: atomisp2: array underflow in imx_enum_frame_size() media: atomisp2: array underflow in ap1302_enum_frame_size() media: atomisp2: Array underflow in atomisp_enum_input() media: platform: davinci: drop VPFE_CMD_S_CCDC_RAW_PARAMS media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctl media: venus: don't abuse dma_alloc for non-DMA allocations media: venus: hfi: fix error handling in hfi_sys_init_done() media: venus: fix compile-test build on non-qcom ARM platform media: venus: mark PM functions as __maybe_unused media: cec-notifier: small improvements media: pulse8-cec: persistent_config should be off by default media: cec: cec_transmit_attempt_done: ignore CEC_TX_STATUS_MAX_RETRIES media: staging: atomisp: array underflow in ioctl media: lirc: LIRC_GET_REC_RESOLUTION should return microseconds media: svg: avoid too long lines media: svg files: simplify files media: selection.svg: simplify the SVG file media: vimc: set id_table for platform drivers media: staging: atomisp: disable warnings with cc-disable-warning media: davinci: variable 'common' set but not used ...
2017-08-05ext4: release discard bio after sending discard commandsDaeho Jeong
We've changed the discard command handling into parallel manner. But, in this change, I forgot decreasing the usage count of the bio which was used to send discard request. I'm sorry about that. Fixes: a015434480dc ("ext4: send parallel discards on commit completions") Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2017-08-05ARM: dts: sun8i: a83t: h8homlet: Enable micro-SD card and onboard eMMCChen-Yu Tsai
The H8 homlet has a micro-SD card slot connected to mmc0, and onboard eMMC from FORESEE, connected to mmc2. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-05ARM: dts: sun8i: a83t: cubietruck-plus: Enable micro-SD card and eMMCChen-Yu Tsai
Now that we support the MMC controllers on the A83T SoC, we can enable them on some boards. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-05ARM: dts: sun8i: a83t: Add pingroup for 8-bit eMMC on mmc2Chen-Yu Tsai
mmc2 can support 8-bit eMMC chips, with a dedicated reset line. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-05ARM: dts: sun8i: a83t: Add MMC controller device nodesChen-Yu Tsai
The A83T has 3 MMC controllers. The third one is a bit special, as it supports a wider 8-bit bus, and a "new timing mode". Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-05ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2Marcus Cooper
The dwmac-sun8i hardware is present on the Beelink X2. It uses the internal PHY. This patch create the needed emac node. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: Fixed typo in commit subject] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-05ARM: dts: sun8i: h3: Enable USB OTG on the Beelink X2Marcus Cooper
This STB has a type A socket which acts as OTG. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-05ARM: dts: sun8i: Add BananaPI M2-Magic DTSMaxime Ripard
The Bananapi M2-Magic is a board with an A33, a USB host and USB OTG connectors, and 8GB eMMC, an AP6212 WiFi/Bluetooth chip and connectors for DSI, CSI and GPIOs. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: Correct subject prefix case] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-05ARM: dts: sun7i: enable battery power supply subnode on cubietruckAlexander Syring
The Cubietruck has an AXP209 PMIC with battery connector. This enables the battery power supply subnode. Signed-off-by: Alexander Syring <alex@asyring.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: Correct subject prefix order] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-05ARM: dts: sun8i: a83t: Add device node for R_INTC interrupt controllerChen-Yu Tsai
The R_INTC interrupt controller handles the NMI interrupt pin for the SoC. While there is no documentation or code from the vendor for this device on the A83T, existing mainline kernel drivers and bindings show this to be similar to the old Allwinner interrupt controller found on the A10 SoC, but with only the NMI interrupt wired. Register poking experiments confirm this. The device seems to be the same across all recent Allwinner SoCs, apart from the A20 and A80, which have a separate set of registers to handle the NMI interrupt. We already have a set of bindings supporting this on the A31. Add a device node for it, with an SoC specific compatible. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-05ARM: dts: sun8i: a23/a33: Use new sun6i-a31-r-intc compatible for NMI/R_INTCChen-Yu Tsai
We introduced a new compatible for the NMI or R_INTC interrupt controller. This new compatible has the register region aligned to the boundary listed in the SoC's memory map. This patch converts the NMI/R_INTC node to using the new compatible, and fixes up the register region and device node name. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-05ARM: dts: sun6i: a31: Use new sun6i-a31-r-intc compatible for NMI/R_INTCChen-Yu Tsai
We introduced a new compatible for the NMI or R_INTC interrupt controller. This new compatible has the register region aligned to the boundary listed in the SoC's memory map. This patch converts the NMI/R_INTC node to using the new compatible, and fixes up the register region and device node name. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-05Merge tag 'gpio-v4.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - LP87565: set the proper output level for direction_output. - stm32: fix the kernel build by selecting the hierarchical irqdomain symbol properly - this happens to be done in the pin control framework but whatever, it had dependencies to GPIO so we need to apply it here. - Select the hierarchical IRQ domain also for Xgene. - Fix wakeups to work on MXC. - Fix up the device tree binding on Exar that went astray, also add the right bindings. - Fix the unwanted events for edges from the library. - Fix the unbalanced chanined IRQ on the Tegra. * tag 'gpio-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tegra: fix unbalanced chained_irq_enter/exit gpiolib: skip unwanted events, don't convert them to opposite edge gpio: exar: Use correct property prefix and document bindings gpio: gpio-mxc: Fix: higher 16 GPIOs usable as wake source gpio: xgene-sb: select IRQ_DOMAIN_HIERARCHY pinctrl: stm32: select IRQ_DOMAIN_HIERARCHY instead of depends on gpio: lp87565: Set proper output level and direction for direction_output MAINTAINERS: Add entry for Whiskey Cove PMIC GPIO driver
2017-08-05ARM: dts: imx6ul-liteboard: Support poweroffMarcin Niestroj
Support proper system power-off, which disables main regulator. This results in much lower power consumption and support of power-on issued by button press. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-05ARM: dts: imx: add CX9020 Embedded PC device treePatrick Bruenn
The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - no SATA connector - CCAT FPGA connected to emi - enable rtc Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-05ARM: dts: imx53: add alternative UART2 configurationPatrick Bruenn
UART2 on EIM_D26 - EIM_D29 pins supports interchanging RXD/TXD pins and RTS/CTS pins. One board using these alternate settings is Beckhoff CX9020. Add the alternative configuration here, to make it available to others, too. Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-05ARM: dts: imx53: add srtc nodePatrick Bruenn
The i.MX53 has an integrated secure real time clock. Add it to the dtsi. Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-05dt-bindings: arm: Add entry for Beckhoff CX9020Patrick Bruenn
- add vendor prefix bhf for Beckhoff - add new board binding bhf,cx9020 Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-05ARM: dts: i.MX25: add RNGB node to dtsiSteffen Trumtrar
Add a devicetree entry for the Random Number Generator Version B (RNGB). The driver for RNGC supports version B as well. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-04Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of critical fixes for changes introduce this merge window. - The TI sci_clk_get() API was pretty broken and nobody noticed. - There were some CPUfreq crashes on C.H.I.P devices because we failed to propagate rates up the clk tree. - Also, the Intel Atom PMC clk driver needs to mark a clk critical if the firmware has it enabled already so that audio doesn't get killed on Baytrail. - Gemini devices have a dead serial console because the reset control usage in the serial driver assume one method of reset that gemini doesn't support (this will be fixed in the next version in the reset framework so this is the small fix for -rc series). - Finally we have two rate calculation fixes, one for Exynos and one for Meson SoCs, that fix rate inconsistencies" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: keystone: sci-clk: Fix sci_clk_get clk: meson: mpll: fix mpll0 fractional part ignored clk: samsung: exynos5420: The EPLL rate table corrections clk: sunxi-ng: sun5i: Add clk_set_rate_parent to the CPU clock clk: x86: Do not gate clocks enabled by the firmware clk: gemini: Fix reset regression
2017-08-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "ARM: - Yet another race with VM destruction plugged - A set of small vgic fixes x86: - Preserve pending INIT - RCU fixes in paravirtual async pf, VM teardown, and VMXOFF emulation - nVMX interrupt injection and dirty tracking fixes - initialize to make UBSAN happy" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm/arm64: vgic: Use READ_ONCE fo cmpxchg KVM: nVMX: Fix interrupt window request with "Acknowledge interrupt on exit" KVM: nVMX: mark vmcs12 pages dirty on L2 exit kvm: nVMX: don't flush VMCS12 during VMXOFF or VCPU teardown KVM: nVMX: do not pin the VMCS12 KVM: avoid using rcu_dereference_protected KVM: X86: init irq->level in kvm_pv_kick_cpu_op KVM: X86: Fix loss of pending INIT due to race KVM: async_pf: make rcu irq exit if not triggered from idle task KVM: nVMX: fixes to nested virt interrupt injection KVM: nVMX: do not fill vm_exit_intr_error_code in prepare_vmcs12 KVM: arm/arm64: Handle hva aging while destroying the vm KVM: arm/arm64: PMU: Fix overflow interrupt injection KVM: arm/arm64: Fix bug in advertising KVM_CAP_MSI_DEVID capability
2017-08-04Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "The recent irq core changes unearthed API abuse in the HPET code, which manifested itself in a suspend/resume regression. The fix replaces the cruft with the proper function calls and cures the regression" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hpet: Cure interface abuse in the resume path
2017-08-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix for a multiplication overflow in the timer code on 32bit systems" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Fix overflow in get_next_timer_interrupt
generated by cgit (git 2.34.1) at 2025-09-11 11:20:26 +0000