summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-27scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCNSteffen Maier
If an incoming ELS of type RSCN contains more than one element, zfcp suboptimally causes repeated erp trigger NOP trace records for each previously failed port. These could be ports that went away. It loops over each RSCN element, and for each of those in an inner loop over all zfcp_ports. The trigger to recover failed ports should be just the reception of some RSCN, no matter how many elements it has. So we can loop over failed ports separately, and only then loop over each RSCN element to handle the non-failed ports. The call chain was: zfcp_fc_incoming_rscn for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== In order the reduce the "flooding" of the REC trace area in such cases, we factor out handling the failed ports to be outside of the entries loop: zfcp_fc_incoming_rscn if (no_entries > 1) <=== list_for_each_entry(port, &adapter->port_list, list) <=== if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link Abbreviated example trace records before this code change: Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x02 Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x00 NOP => superfluous trace record The last trace entry repeats if there are more than 2 RSCN elements. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: zfcp: fix scsi_eh host reset with port_forced ERP for non-NPIV FCP devicesSteffen Maier
Suppose more than one non-NPIV FCP device is active on the same channel. Send I/O to storage and have some of the pending I/O run into a SCSI command timeout, e.g. due to bit errors on the fibre. Now the error situation stops. However, we saw FCP requests continue to timeout in the channel. The abort will be successful, but the subsequent TUR fails. Scsi_eh starts. The LUN reset fails. The target reset fails. The host reset only did an FCP device recovery. However, for non-NPIV FCP devices, this does not close and reopen ports on the SAN-side if other non-NPIV FCP device(s) share the same open ports. In order to resolve the continuing FCP request timeouts, we need to explicitly close and reopen ports on the SAN-side. This was missing since the beginning of zfcp in v2.6.0 history commit ea127f975424 ("[PATCH] s390 (7/7): zfcp host adapter."). Note: The FSF requests for forced port reopen could run into FSF request timeouts due to other reasons. This would trigger an internal FCP device recovery. Pending forced port reopen recoveries would get dismissed. So some ports might not get fully reopened during this host reset handler. However, subsequent I/O would trigger the above described escalation and eventually all ports would be forced reopen to resolve any continuing FCP request timeouts due to earlier bit errors. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> #3.0+ Reviewed-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: zfcp: fix rport unblock if deleted SCSI devices on Scsi_HostSteffen Maier
An already deleted SCSI device can exist on the Scsi_Host and remain there because something still holds a reference. A new SCSI device with the same H:C:T:L and FCP device, target port WWPN, and FCP LUN can be created. When we try to unblock an rport, we still find the deleted SCSI device and return early because the zfcp_scsi_dev of that SCSI device is not ZFCP_STATUS_COMMON_UNBLOCKED. Hence we miss to unblock the rport, even if the new proper SCSI device would be in good state. Therefore, skip deleted SCSI devices when iterating the sdevs of the shost. [cf. __scsi_device_lookup{_by_target}() or scsi_device_get()] The following abbreviated trace sequence can indicate such problem: Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 not ZFCP_STATUS_COMMON_UNBLOCKED Ready count : n not incremented yet Running count : 0x00000000 ERP want : 0x01 ERP need : 0xc1 ZFCP_ERP_ACTION_NONE Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x41000000 Ready count : n+1 Running count : 0x00000000 ERP want : 0x01 ERP need : 0x01 ... Area : REC Level : 4 only with increased trace level Tag : ertru_l LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 Request ID : 0x0000000000000000 ERP status : 0x01800000 ERP step : 0x1000 ERP action : 0x01 ERP count : 0x00 NOT followed by a trace record with tag "scpaddy" for WWPN 0x50050763031bd327. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: 6f2ce1c6af37 ("scsi: zfcp: fix rport unblock race with LUN recovery") Cc: <stable@vger.kernel.org> #2.6.32+ Reviewed-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: sd: Quiesce warning if device does not report optimal I/O sizeMartin K. Petersen
Commit a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of physical block size") split one conditional into several separate statements in an effort to provide more accurate warning messages when a device reports a nonsensical value. However, this reorganization accidentally dropped the precondition of the reported value being larger than zero. This lead to a warning getting emitted on devices that do not report an optimal I/O size at all. Remain silent if a device does not report an optimal I/O size. Fixes: a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of physical block size") Cc: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> Reported-by: Hussam Al-Tayeb <ht990332@gmx.com> Tested-by: Hussam Al-Tayeb <ht990332@gmx.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: sd: Fix a race between closing an sd device and sd I/OBart Van Assche
The scsi_end_request() function calls scsi_cmd_to_driver() indirectly and hence needs the disk->private_data pointer. Avoid that that pointer is cleared before all affected I/O requests have finished. This patch avoids that the following crash occurs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: scsi_mq_uninit_cmd+0x1c/0x30 scsi_end_request+0x7c/0x1b8 scsi_io_completion+0x464/0x668 scsi_finish_command+0xbc/0x160 scsi_eh_flush_done_q+0x10c/0x170 sas_scsi_recover_host+0x84c/0xa98 [libsas] scsi_error_handler+0x140/0x5b0 kthread+0x100/0x12c ret_from_fork+0x10/0x18 Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Jason Yan <yanaijie@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reported-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: core: Run queue when state is set to running after being blockedzhengbin
Use dd to test a SCSI device: 1. echo "blocked" >/sys/block/sda/device/state 2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10 3. echo "running" >/sys/block/sda/device/state dd should finish this work after step 3, but it hangs. After step2, the call chain is this: blk_mq_dispatch_rq_list-->scsi_queue_rq-->prep_to_mq prep_to_mq will return BLK_STS_RESOURCE, and scsi_queue_rq will transition it to BLK_STS_DEV_RESOURCE which means that driver can guarantee that IO dispatch will be triggered in future when the resource is available. Need to follow the rule if we set the device state to running. [mkp: tweaked commit description and code comment as suggested by Bart] Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Fixes here and there, a couple new device IDs, as usual: 1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei. 2) Fix 64-bit division in iwlwifi, from Arnd Bergmann. 3) Fix documentation for some eBPF helpers, from Quentin Monnet. 4) Some UAPI bpf header sync with tools, also from Quentin Monnet. 5) Set descriptor ownership bit at the right time for jumbo frames in stmmac driver, from Aaro Koskinen. 6) Set IFF_UP properly in tun driver, from Eric Dumazet. 7) Fix load/store doubleword instruction generation in powerpc eBPF JIT, from Naveen N. Rao. 8) nla_nest_start() return value checks all over, from Kangjie Lu. 9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this merge window. From Marcelo Ricardo Leitner and Xin Long. 10) Fix memory corruption with large MTUs in stmmac, from Aaro Koskinen. 11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric Dumazet. 12) Fix topology subscription cancellation in tipc, from Erik Hugne. 13) Memory leak in genetlink error path, from Yue Haibing. 14) Valid control actions properly in packet scheduler, from Davide Caratti. 15) Even if we get EEXIST, we still need to rehash if a shrink was delayed. From Herbert Xu. 16) Fix interrupt mask handling in interrupt handler of r8169, from Heiner Kallweit. 17) Fix leak in ehea driver, from Wen Yang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits) dpaa2-eth: fix race condition with bql frame accounting chelsio: use BUG() instead of BUG_ON(1) net: devlink: skip info_get op call if it is not defined in dumpit net: phy: bcm54xx: Encode link speed and activity into LEDs tipc: change to check tipc_own_id to return in tipc_net_stop net: usb: aqc111: Extend HWID table by QNAP device net: sched: Kconfig: update reference link for PIE net: dsa: qca8k: extend slave-bus implementations net: dsa: qca8k: remove leftover phy accessors dt-bindings: net: dsa: qca8k: support internal mdio-bus dt-bindings: net: dsa: qca8k: fix example net: phy: don't clear BMCR in genphy_soft_reset bpf, libbpf: clarify bump in libbpf version info bpf, libbpf: fix version info and add it to shared object rxrpc: avoid clang -Wuninitialized warning tipc: tipc clang warning net: sched: fix cleanup NULL pointer exception in act_mirr r8169: fix cable re-plugging issue net: ethernet: ti: fix possible object reference leak net: ibm: fix possible object reference leak ...
2019-03-27arm64: replace memblock_alloc_low with memblock_allocChen Zhou
If we use "crashkernel=Y[@X]" and the start address is above 4G, the arm64 kdump capture kernel may call memblock_alloc_low() failure in request_standard_resources(). Replacing memblock_alloc_low() with memblock_alloc(). [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x0000000040650000 reserved size = 0x0000000004db7f39 [ 0.000000] memory.cnt = 0x6 [ 0.000000] memory[0x0] [0x00000000395f0000-0x000000003968ffff], 0x00000000000a0000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x1] [0x0000000039730000-0x000000003973ffff], 0x0000000000010000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x2] [0x0000000039780000-0x000000003986ffff], 0x00000000000f0000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x3] [0x0000000039890000-0x0000000039d0ffff], 0x0000000000480000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x4] [0x000000003ed00000-0x000000003ed2ffff], 0x0000000000030000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x5] [0x0000002040000000-0x000000207fffffff], 0x0000000040000000 bytes on node 0 flags: 0x0 [ 0.000000] reserved.cnt = 0x7 [ 0.000000] reserved[0x0] [0x0000002040080000-0x0000002041c4dfff], 0x0000000001bce000 bytes flags: 0x0 [ 0.000000] reserved[0x1] [0x0000002041c53000-0x0000002042c203f8], 0x0000000000fcd3f9 bytes flags: 0x0 [ 0.000000] reserved[0x2] [0x000000207da00000-0x000000207dbfffff], 0x0000000000200000 bytes flags: 0x0 [ 0.000000] reserved[0x3] [0x000000207ddef000-0x000000207fbfffff], 0x0000000001e11000 bytes flags: 0x0 [ 0.000000] reserved[0x4] [0x000000207fdf2b00-0x000000207fdfc03f], 0x0000000000009540 bytes flags: 0x0 [ 0.000000] reserved[0x5] [0x000000207fdfd000-0x000000207ffff3ff], 0x0000000000202400 bytes flags: 0x0 [ 0.000000] reserved[0x6] [0x000000207ffffe00-0x000000207fffffff], 0x0000000000000200 bytes flags: 0x0 [ 0.000000] Kernel panic - not syncing: request_standard_resources: Failed to allocate 384 bytes [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-next-20190321+ #4 [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x0/0x188 [ 0.000000] show_stack+0x24/0x30 [ 0.000000] dump_stack+0xa8/0xcc [ 0.000000] panic+0x14c/0x31c [ 0.000000] setup_arch+0x2b0/0x5e0 [ 0.000000] start_kernel+0x90/0x52c [ 0.000000] ---[ end Kernel panic - not syncing: request_standard_resources: Failed to allocate 384 bytes ]--- Link: https://www.spinics.net/lists/arm-kernel/msg715293.html Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-27ceph: fix use-after-free on symlink traversalAl Viro
free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-28virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.xHans de Goede
VirtualBox 6.0.x has a new feature where the guest kernel driver passes info about the origin of the request (e.g. userspace or kernelspace) to the hypervisor. If we do not pass this information then when running the 6.0.x userspace guest-additions tools on a 6.0.x host, some requests will get denied with a VERR_VERSION_MISMATCH error, breaking vboxservice.service and the mounting of shared folders marked to be auto-mounted. This commit implements passing the requestor info to the host, fixing this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28virtio_console: initialize vtermno value for portsPankaj Gupta
For regular serial ports we do not initialize value of vtermno variable. A garbage value is assigned for non console ports. The value can be observed as a random integer with [1]. [1] vim /sys/kernel/debug/virtio-ports/vport*p* This patch initialize the value of vtermno for console serial ports to '1' and regular serial ports are initiaized to '0'. Reported-by: siliu@redhat.com Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28vt: use /dev/vcs (not /dev/vcs0) in commentJakub Wilk
Both /dev/vcs and /dev/vcs0 were in use in the past, but these days /dev/vcs0 is mostly historical curiosity. * "/dev/vcs" is the name that has always been in the Linux allocated devices list. * "vcs" is the device name in sysfs since Linux v2.6.12. * MAKEDEV(1) in Debian used to create /dev/vcs0 only, but /dev/vcs was added in 1999: https://bugs.debian.org/45698 * MAKEDEV(1) in RedHat switched from /dev/vcs0 to /dev/vcs in 2000: * Fri Oct 20 2000 Nalin Dahyabhai <nalin@redhat.com> - change vcs0 to vcs (ditto for vcsa0) Signed-off-by: Jakub Wilk <jwilk@jwilk.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty: pty: Fix race condition between release_one_tty and pty_writeSahara
Especially when a linked tty is used such as pty, the linked tty port's buf works have not been cancelled while master tty port's buf work has been cancelled. Since release_one_tty and flush_to_ldisc run in workqueue threads separately, when pty_cleanup happens and link tty port is freed, flush_to_ldisc tries to access freed port and port->itty, eventually it causes a panic. This patch utilizes the magic value with holding the tty_mutex to check if the tty->link is valid. Fixes: 2b022ab7542d ("pty: cancel pty slave port buf's work in tty_release") Signed-off-by: Sahara <keun-o.park@darkmatter.ae> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty: vt.c: Fix TIOCL_BLANKSCREEN console blanking if blankinterval == 0Yifeng Li
Previously, in the userspace, it was possible to use the "setterm" command from util-linux to blank the VT console by default, using the following command. According to the man page, > The force option keeps the screen blank even if a key is pressed. It was implemented by calling TIOCL_BLANKSCREEN. case BLANKSCREEN: ioctlarg = TIOCL_BLANKSCREEN; if (ioctl(STDIN_FILENO, TIOCLINUX, &ioctlarg)) warn(_("cannot force blank")); break; However, after Linux 4.12, this command ceased to work anymore, which is unexpected. By inspecting the kernel source, it shows that the issue was triggered by the side-effect from commit a4199f5eb809 ("tty: Disable default console blanking interval"). The console blanking is implemented by function do_blank_screen() in vt.c: "blank_state" will be initialized to "blank_normal_wait" in con_init() if AND ONLY IF ("blankinterval" > 0). If "blankinterval" is 0, "blank_state" will be "blank_off" (== 0), and a call to do_blank_screen() will always abort, even if a forced blanking is required from the user by calling TIOCL_BLANKSCREEN, the console won't be blanked. This behavior is unexpected from a user's point-of-view, since it's not mentioned in any documentation. The setterm man page suggests it will always work, and the kernel comments in uapi/linux/tiocl.h says > /* keep screen blank even if a key is pressed */ > #define TIOCL_BLANKSCREEN 14 To fix it, we simply remove the "blank_state != blank_off" check, as pointed out by Nicolas Pitre, this check doesn't logically make sense and it's safe to remove. Suggested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Fixes: a4199f5eb809 ("tty: Disable default console blanking interval") Signed-off-by: Yifeng Li <tomli@tomli.me> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty/vt: fix write/write race in ioctl(KDSKBSENT) handlerSergei Trofimovich
The bug manifests as an attempt to access deallocated memory: BUG: unable to handle kernel paging request at ffff9c8735448000 #PF error: [PROT] [WRITE] PGD 288a05067 P4D 288a05067 PUD 288a07067 PMD 7f60c2063 PTE 80000007f5448161 Oops: 0003 [#1] PREEMPT SMP CPU: 6 PID: 388 Comm: loadkeys Tainted: G C 5.0.0-rc6-00153-g5ded5871030e #91 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M-D3H, BIOS F12 11/14/2013 RIP: 0010:__memmove+0x81/0x1a0 Code: 4c 89 4f 10 4c 89 47 18 48 8d 7f 20 73 d4 48 83 c2 20 e9 a2 00 00 00 66 90 48 89 d1 4c 8b 5c 16 f8 4c 8d 54 17 f8 48 c1 e9 03 <f3> 48 a5 4d 89 1a e9 0c 01 00 00 0f 1f 40 00 48 89 d1 4c 8b 1e 49 RSP: 0018:ffffa1b9002d7d08 EFLAGS: 00010203 RAX: ffff9c873541af43 RBX: ffff9c873541af43 RCX: 00000c6f105cd6bf RDX: 0000637882e986b6 RSI: ffff9c8735447ffb RDI: ffff9c8735447ffb RBP: ffff9c8739cd3800 R08: ffff9c873b802f00 R09: 00000000fffff73b R10: ffffffffb82b35f1 R11: 00505b1b004d5b1b R12: 0000000000000000 R13: ffff9c873541af3d R14: 000000000000000b R15: 000000000000000c FS: 00007f450c390580(0000) GS:ffff9c873f180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9c8735448000 CR3: 00000007e213c002 CR4: 00000000000606e0 Call Trace: vt_do_kdgkb_ioctl+0x34d/0x440 vt_ioctl+0xba3/0x1190 ? __bpf_prog_run32+0x39/0x60 ? mem_cgroup_commit_charge+0x7b/0x4e0 tty_ioctl+0x23f/0x920 ? preempt_count_sub+0x98/0xe0 ? __seccomp_filter+0x67/0x600 do_vfs_ioctl+0xa2/0x6a0 ? syscall_trace_enter+0x192/0x2d0 ksys_ioctl+0x3a/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x54/0xe0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The bug manifests on systemd systems with multiple vtcon devices: # cat /sys/devices/virtual/vtconsole/vtcon0/name (S) dummy device # cat /sys/devices/virtual/vtconsole/vtcon1/name (M) frame buffer device There systemd runs 'loadkeys' tool in tapallel for each vtcon instance. This causes two parallel ioctl(KDSKBSENT) calls to race into adding the same entry into 'func_table' array at: drivers/tty/vt/keyboard.c:vt_do_kdgkb_ioctl() The function has no locking around writes to 'func_table'. The simplest reproducer is to have initrams with the following init on a 8-CPU machine x86_64: #!/bin/sh loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & wait The change adds lock on write path only. Reads are still racy. CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Jiri Slaby <jslaby@suse.com> Link: https://lkml.org/lkml/2019/2/17/256 Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty: ipwireless: fix missing checks for ioremapKangjie Lu
ipw->attr_memory and ipw->common_memory are assigned with the return value of ioremap. ioremap may fail, but no checks are enforced. The fix inserts the checks to avoid potential NULL pointer dereferences. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty: fix read of tty->pgrp outside of ctrl_lockDavid Emett
The intention was clearly to use the tty_pgrp local variable rather than re-read tty->pgrp outside of ctrl_lock, so do that. This bug was introduced by commit 2812d9e9fd94 ("tty: Combine SIGTTOU/SIGTTIN handling"). Signed-off-by: David Emett <dave@sp4m.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28drivers/tty/tty_jobctrl.c - fix non-kerneldoc commentValdis Klētnieks
Building with W=1 reports (among other things): CC drivers/tty/tty_jobctrl.o drivers/tty/tty_jobctrl.c:317: warning: Cannot understand * on line 317 - I thought it was a doc line Fix up the non-kerneldoc comment. (other warnings to be cleaned up in separate patch) Signed-off-by Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty/sysrq: Convert show_lock to raw_spinlock_tJulien Grall
Systems which don't provide arch_trigger_cpumask_backtrace() will invoke showacpu() from a smp_call_function() function which is invoked with disabled interrupts even on -RT systems. The function acquires the show_lock lock which only purpose is to ensure that the CPUs don't print simultaneously. Otherwise the output would clash and it would be hard to tell the output from CPUx apart from CPUy. On -RT the spin_lock() can not be acquired from this context. A raw_spin_lock() is required. It will introduce the system's latency by performing the sysrq request and other CPUs will block on the lock until the request is done. This is okay because the user asked for a backtrace of all active CPUs and under "normal circumstances in production" this path should not be triggered. Signed-off-by: Julien Grall <julien.grall@arm.com> [bigeasy@linuxtronix.de: commit description] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty: fix NULL pointer issue when tty_port ops is not setFabien Dessenne
Unlike 'client_ops' which is initialized to 'default_client_ops', the port operations 'ops' may be left to NULL. Check the 'ops' value before checking the 'ops->x' value. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28serial: sc16is7xx: Drop of_match_ptr() useAndy Shevchenko
There is an ACPI method to enumerate such devices via specific ACPI ID and use of compatible strings. It will not work for the drivers which have no OF match ID table present. Reported-by: Georgii Staroselskii <georgii.staroselskii@emlid.com> Tested-By: Georgii Staroselskii <georgii.staroselskii@emlid.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28serial: sc16is7xx: Switch to use device_get_match_data()Andy Shevchenko
Instead of open coded variants, switch to direct use of device_get_match_data(). Tested-By: Georgii Staroselskii <georgii.staroselskii@emlid.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28serial: sc16is7xx: Respect clock-frequency propertyAndy Shevchenko
If the property is provided and there are no other possibilities to detect UART clock frequency, use it as a fallback. Tested-By: Georgii Staroselskii <georgii.staroselskii@emlid.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28dt-bindings: sc16is7xx: Add alternative clock-frequency propertyAndy Shevchenko
For the platforms which have no clock provider for the sc16is7xx type of UART, introduce an alternative clock-frequency property which would be used instead. Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28serial: sprd: Add DMA mode supportLanqing Liu
Add DMA mode support for the Spreadtrum serial controller. Signed-off-by: Lanqing Liu <lanqing.liu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28dt-bindings: serial: sprd: Add dma properties to support DMA modeLanqing Liu
This patch adds dmas and dma-names properties for the UART DMA mode. Signed-off-by: Lanqing Liu <lanqing.liu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28serial: sprd: Add power management for the Spreadtrum serial controllerLanqing Liu
This patch adds power management for the Spreadtrum serial controller. Signed-off-by: Lanqing Liu <lanqing.liu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28dt-bindings: serial: sprd: Add clocks and clocks-names propertiesLanqing Liu
This patch adds clocks and clocks-names properties, which are used to do power management for our UART driver. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lanqing Liu <lanqing.liu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28serial: 8250_fintek: Make fintek_8250_set_termios staticYueHaibing
Fix sparse warning: drivers/tty/serial/8250/8250_fintek.c:306:6: warning: symbol 'fintek_8250_set_termios' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdbocWentao Wang
Echo "" to /sys/module/kgdboc/parameters/kgdboc will fail with "No such device” error. This is caused by function "configure_kgdboc" who init err to ENODEV when the config is empty (legal input) the code go out with ENODEV returned. Fixes: 2dd453168643 ("kgdboc: Fix restrict error") Signed-off-by: Wentao Wang <witallwang@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28dt-bindings: serial: Add compatible for Mediatek MT8183Erin Lo
This adds dt-binding documentation of uart for Mediatek MT8183 SoC Platform. Signed-off-by: Erin Lo <erin.lo@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stoppedRazvan Stefanescu
In half-duplex operation, RX should be started after TX completes. If DMA is used, there is a case when the DMA transfer completes but the TX FIFO is not emptied, so the RX cannot be restarted just yet. Use a boolean variable to store this state and rearm TX interrupt mask to be signaled again that the transfer finished. In interrupt transmit handler this variable is used to start RX. A warning message is generated if RX is activated before TX fifo is cleared. Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty/serial: atmel: Add is_half_duplex helperRazvan Stefanescu
Use a helper function to check that a port needs to use half duplex communication, replacing several occurrences of multi-line bit checking. Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Cc: stable <stable@vger.kernel.org> Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28usb: u132-hcd: fix resource leakMukesh Ojha
if platform_driver_register fails, cleanup the allocated resource gracefully. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28usb: cdc-acm: fix race during wakeup blocking TX trafficRomain Izard
When the kernel is compiled with preemption enabled, the URB completion handler can run in parallel with the work responsible for waking up the tty layer. If the URB handler sets the EVENT_TTY_WAKEUP bit during the call to tty_port_tty_wakeup() to signal that there is room for additional input, it will be cleared at the end of this call. As a result, TX traffic on the upper layer will be blocked. This can be seen with a kernel configured with CONFIG_PREEMPT, and a fast modem connected with PPP running over a USB CDC-ACM port. Use test_and_clear_bit() instead, which ensures that each wakeup requested by the URB completion code will trigger a call to tty_port_tty_wakeup(). Fixes: 1aba579f3cf5 cdc-acm: handle read pipe errors Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27x86/realmode: Don't leak the trampoline kernel addressMatteo Croce
Since commit ad67b74d2469 ("printk: hash addresses printed with %p") at boot "____ptrval____" is printed instead of the trampoline addresses: Base memory trampoline at [(____ptrval____)] 99000 size 24576 Remove the print as we don't want to leak kernel addresses and this statement is not needed anymore. Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p") Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190326203046.20787-1-mcroce@redhat.com
2019-03-27i2c: wmt: make bindings file name match the driverWolfram Sang
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27i2c: sun6i-p2wi: make bindings file name match the driverWolfram Sang
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-27i2c: stu300: make bindings file name match the driverWolfram Sang
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27i2c: mt65xx: make bindings file name match the driverWolfram Sang
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27i2c: iop3xx: make bindings file name match the driverWolfram Sang
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27x86/boot: Fix incorrect ifdeffery scopeBaoquan He
The declarations related to immovable memory handling are out of the BOOT_COMPRESSED_MISC_H #ifdef scope, wrap them inside. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Chao Fan <fanc.fnst@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190304055546.18566-1-bhe@redhat.com
2019-03-27gpio: mockup: fix debugfs readBartosz Golaszewski
The debugfs read callback must advance ppos or users using read() on the file descriptor will never get the EOL. This wasn't spotted before as I was using busybox cat for testing which uses sendfile() internally and only noticed it now when switched to cat from coreutils. Fixes: 2a9e27408e12 ("gpio: mockup: rework debugfs interface") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-27Revert "gpio: use new gpio_set_config() helper in more places"Andrew Jeffery
gpio-aspeed implements support for PIN_CONFIG_INPUT_DEBOUNCE. As of v5.1-rc1 we're seeing the following when booting a Romulus BMC kernel: > [ 21.373137] ------------[ cut here ]------------ > [ 21.374545] WARNING: CPU: 0 PID: 1 at drivers/gpio/gpio-aspeed.c:834 unregister_allocated_timer+0x38/0x94 > [ 21.376181] No timer allocated to offset 74 > [ 21.377672] CPU: 0 PID: 1 Comm: swapper Not tainted 5.1.0-rc1-dirty #6 > [ 21.378800] Hardware name: Generic DT based system > [ 21.379965] Backtrace: > [ 21.381024] [<80107d44>] (dump_backtrace) from [<80107f78>] (show_stack+0x20/0x24) > [ 21.382713] r7:8038b720 r6:00000009 r5:00000000 r4:87897c64 > [ 21.383815] [<80107f58>] (show_stack) from [<80656398>] (dump_stack+0x20/0x28) > [ 21.385042] [<80656378>] (dump_stack) from [<80115f1c>] (__warn.part.3+0xb4/0xdc) > [ 21.386253] [<80115e68>] (__warn.part.3) from [<80115fb0>] (warn_slowpath_fmt+0x6c/0x90) > [ 21.387471] r6:00000342 r5:807f8758 r4:80a07008 > [ 21.388278] [<80115f48>] (warn_slowpath_fmt) from [<8038b720>] (unregister_allocated_timer+0x38/0x94) > [ 21.389809] r3:0000004a r2:807f8774 > [ 21.390526] r7:00000000 r6:0000000a r5:60000153 r4:0000004a > [ 21.391601] [<8038b6e8>] (unregister_allocated_timer) from [<8038baac>] (aspeed_gpio_set_config+0x330/0x48c) > [ 21.393248] [<8038b77c>] (aspeed_gpio_set_config) from [<803840b0>] (gpiod_set_debounce+0xe8/0x114) > [ 21.394745] r10:82ee2248 r9:00000000 r8:87b63a00 r7:00001388 r6:87947320 r5:80729310 > [ 21.396030] r4:879f64a0 > [ 21.396499] [<80383fc8>] (gpiod_set_debounce) from [<804b4350>] (gpio_keys_probe+0x69c/0x8e0) > [ 21.397715] r7:845d94b8 r6:00000001 r5:00000000 r4:87b63a1c > [ 21.398618] [<804b3cb4>] (gpio_keys_probe) from [<8040eeec>] (platform_dev_probe+0x44/0x80) > [ 21.399834] r10:00000003 r9:80a3a8b0 r8:00000000 r7:00000000 r6:80a7f9dc r5:80a3a8b0 > [ 21.401163] r4:8796bc10 > [ 21.401634] [<8040eea8>] (platform_drv_probe) from [<8040d0d4>] (really_probe+0x208/0x3dc) > [ 21.402786] r5:80a7f8d0 r4:8796bc10 > [ 21.403547] [<8040cecc>] (really_probe) from [<8040d7a4>] (driver_probe_device+0x130/0x170) > [ 21.404744] r10:0000007b r9:8093683c r8:00000000 r7:80a07008 r6:80a3a8b0 r5:8796bc10 > [ 21.405854] r4:80a3a8b0 > [ 21.406324] [<8040d674>] (driver_probe_device) from [<8040da8c>] (device_driver_attach+0x68/0x70) > [ 21.407568] r9:8093683c r8:00000000 r7:80a07008 r6:80a3a8b0 r5:00000000 r4:8796bc10 > [ 21.408877] [<8040da24>] (device_driver_attach) from [<8040db14>] (__driver_attach+0x80/0x150) > [ 21.410327] r7:80a07008 r6:8796bc10 r5:00000001 r4:80a3a8b0 > [ 21.411294] [<8040da94>] (__driver_attach) from [<8040b20c>] (bus_for_each_dev+0x80/0xc4) > [ 21.412641] r7:80a07008 r6:8040da94 r5:80a3a8b0 r4:87966f30 > [ 21.413580] [<8040b18c>] (bus_for_each_dev) from [<8040dc0c>] (driver_attach+0x28/0x30) > [ 21.414943] r7:00000000 r6:87b411e0 r5:80a33fc8 r4:80a3a8b0 > [ 21.415927] [<8040dbe4>] (driver_attach) from [<8040bbf0>] (bus_add_driver+0x14c/0x200) > [ 21.417289] [<8040baa4>] (bus_add_driver) from [<8040e2b4>] (driver_register+0x84/0x118) > [ 21.418652] r7:80a60ae0 r6:809226b8 r5:80a07008 r4:80a3a8b0 > [ 21.419652] [<8040e230>] (driver_register) from [<8040fc28>] (__platform_driver_register+0x3c/0x50) > [ 21.421193] r5:80a07008 r4:809525f8 > [ 21.421990] [<8040fbec>] (__platform_driver_register) from [<809226d8>] (gpio_keys_init+0x20/0x28) > [ 21.423447] [<809226b8>] (gpio_keys_init) from [<8090128c>] (do_one_initcall+0x80/0x180) > [ 21.424886] [<8090120c>] (do_one_initcall) from [<80901538>] (kernel_init_freeable+0x1ac/0x26c) > [ 21.426354] r8:80a60ae0 r7:80a60ae0 r6:8093685c r5:00000008 r4:809525f8 > [ 21.427579] [<8090138c>] (kernel_init_freeable) from [<8066d9a0>] (kernel_init+0x18/0x11c) > [ 21.428819] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:8066d988 > [ 21.429947] r4:00000000 > [ 21.430415] [<8066d988>] (kernel_init) from [<801010e8>] (ret_from_fork+0x14/0x2c) > [ 21.431666] Exception stack(0x87897fb0 to 0x87897ff8) > [ 21.432877] 7fa0: 00000000 00000000 00000000 00000000 > [ 21.434446] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 > [ 21.436052] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 > [ 21.437308] r5:8066d988 r4:00000000 > [ 21.438102] ---[ end trace d7d7ac3a80567d0e ]--- We only hit unregister_allocated_timer() if the argument to aspeed_gpio_set_config() is 0, but we can't be calling through gpiod_set_debounce() from gpio_keys_probe() unless the gpio-keys button has a non-zero debounce interval. Commit 6581eaf0e890 ("gpio: use new gpio_set_config() helper in more places") spreads the use of gpio_set_config() to the debounce and transitory state configuration paths. The implementation of gpio_set_config() is: > static int gpio_set_config(struct gpio_chip *gc, unsigned offset, > enum pin_config_param mode) > { > unsigned long config = { PIN_CONF_PACKED(mode, 0) }; > > return gc->set_config ? gc->set_config(gc, offset, config) : -ENOTSUPP; > } Here it packs its own config value with a fixed argument of 0; this is incorrect behaviour for implementing the debounce and transitory functions, and the debounce and transitory gpio_set_config() call-sites now have an undetected type mismatch as they both already pack their own config parameter (i.e. what gets passed is not an `enum pin_config_param`). Indeed this can be seen in the small diff for 6581eaf0e890: > diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c > index de595fa31a1a..1f239aac43df 100644 > --- a/drivers/gpio/gpiolib.c > +++ b/drivers/gpio/gpiolib.c > @@ -2725,7 +2725,7 @@ int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce) > } > > config = pinconf_to_config_packed(PIN_CONFIG_INPUT_DEBOUNCE, debounce); > - return chip->set_config(chip, gpio_chip_hwgpio(desc), config); > + return gpio_set_config(chip, gpio_chip_hwgpio(desc), config); > } > EXPORT_SYMBOL_GPL(gpiod_set_debounce); > > @@ -2762,7 +2762,7 @@ int gpiod_set_transitory(struct gpio_desc *desc, bool transitory) > packed = pinconf_to_config_packed(PIN_CONFIG_PERSIST_STATE, > !transitory); > gpio = gpio_chip_hwgpio(desc); > - rc = chip->set_config(chip, gpio, packed); > + rc = gpio_set_config(chip, gpio, packed); > if (rc == -ENOTSUPP) { > dev_dbg(&desc->gdev->dev, "Persistence not supported for GPIO %d\n", > gpio); Revert commit 6581eaf0e890 ("gpio: use new gpio_set_config() helper in more places") to restore correct behaviour for gpiod_set_debounce() and gpiod_set_transitory(). Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-27drm/i915/selftests: Fix an IS_ERR() vs NULL checkDan Carpenter
The live_context() function returns error pointers. It never returns NULL. Fixes: 9c1477e83e62 ("drm/i915/selftests: Exercise adding requests to a full GGTT") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190326050843.GA20038@kadam (cherry picked from commit 602cbe8efc523ba56e1f41e8f74c7aa835672593) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-03-27powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexesGautham R. Shenoy
In cpu_to_drc_index() in the case when FW_FEATURE_DRC_INFO is absent, we currently use of_read_property() to obtain the pointer to the array corresponding to the property "ibm,drc-indexes". The elements of this array are of type __be32, but are accessed without any conversion to the OS-endianness, which is buggy on a Little Endian OS. Fix this by using of_property_read_u32_index() accessor function to safely read the elements of the array. Fixes: e83636ac3334 ("pseries/drc-info: Search DRC properties for CPU indexes") Cc: stable@vger.kernel.org # v4.16+ Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> [mpe: Make the WARN_ON a WARN_ON_ONCE so it's not retriggerable] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-26Merge tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data() - fix mount/umount race in nlmclnt. - NFSv4.1 don't free interrupted slot on open Bugfixes: - Don't let RPC_SOFTCONN tasks time out if the transport is connected - Fix a typo in nfs_init_timeout_values() - Fix layoutstats handling during read failovers - fix uninitialized variable warning" * tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: fix uninitialized variable warning pNFS/flexfiles: Fix layoutstats handling during read failovers NFS: Fix a typo in nfs_init_timeout_values() SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected NFSv4.1 don't free interrupted slot on open NFS: fix mount/umount race in nlmclnt. NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
2019-03-26SUNRPC: fix uninitialized variable warningAlakesh Haloi
Avoid following compiler warning on uninitialized variable net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’: net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized] return read; ^~~~ net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] return ret < 0 ? ret : read; ~~~~~~~~~~~~~~^~~~~~ Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-26leds: trigger: netdev: fix refcnt leak on interface renameRafał Miłecki
Renaming a netdev-trigger-tracked interface was resulting in an unbalanced dev_hold(). Example: > iw phy phy0 interface add foo type __ap > echo netdev > trigger > echo foo > device_name > ip link set foo name bar > iw dev bar del [ 237.355366] unregister_netdevice: waiting for bar to become free. Usage count = 1 [ 247.435362] unregister_netdevice: waiting for bar to become free. Usage count = 1 [ 257.545366] unregister_netdevice: waiting for bar to become free. Usage count = 1 Above problem was caused by trigger checking a dev->name which obviously changes after renaming an interface. It meant missing all further events including the NETDEV_UNREGISTER which is required for calling dev_put(). This change fixes that by: 1) Comparing device struct *address* for notification-filtering purposes 2) Dropping unneeded NETDEV_CHANGENAME code (no behavior change) Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-03-26dpaa2-eth: fix race condition with bql frame accountingIoana Ciornei
It might happen that Tx conf acknowledges a frame before it was subscribed in bql, as subscribing was previously done after the enqueue operation. This patch moves the netdev_tx_sent_queue call before the actual frame enqueue, so that this can never happen. Fixes: 569dac6a5a0d ("dpaa2-eth: bql support") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 06:39:47 +0000