| Age | Commit message (Collapse) | Author |
|---|
|
When Sub-NUMA Cluster (SNC) mode is enabled, the legacy monitor reporting files
must report the sum of the data from all of the SNC nodes that share the L3
cache that is referenced by the monitor file.
Resctrl squeezes all the attributes of these files into 32 bits so they can be
stored in the "priv" field of struct kernfs_node.
Currently, only three monitor events are defined by enum resctrl_event_id so
reducing it from 8 bits to 7 bits still provides more than enough space to
represent all the known event types.
But note that this choice was arbitrary. The "rid" field is also far wider
than needed for the current number of resource id types. This structure is
purely internal to resctrl, no ABI issues with modifying it. Subsequent changes
may rearrange the allocation of bits between each of the fields as needed.
Give the bit to a new "sum" field that indicates that reading this file must
sum across SNC nodes. This bit also indicates that the domid field is the id of
an L3 cache (instead of a domain id) to find which domains must be summed.
Fix up other issues in the kerneldoc description for mon_data_bits.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-13-tony.luck@intel.com
|
|
In Sub-NUMA Cluster (SNC) mode Linux must create the monitor
files in the original "mon_L3_XX" directories and also in each
of the "mon_sub_L3_YY" directories.
Refactor mkdir_mondata_subdir() to move the creation of monitoring files
into a helper function to avoid the need to duplicate code later.
No functional change.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-12-tony.luck@intel.com
|
|
New semantics rely on some struct rmid_read members having NULL values to
distinguish between the SNC and non-SNC scenarios. resctrl can thus no longer
rely on this struct not being initialized properly.
Initialize all on-stack declarations of struct rmid_read:
rdtgroup_mondata_show()
mbm_update()
mkdir_mondata_subdir()
to ensure that garbage values from the stack are not passed down to other
functions.
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-11-tony.luck@intel.com
|
|
When a user reads a monitor file rdtgroup_mondata_show() calls mon_event_read()
to package up all the required details into an rmid_read structure which is
passed across the smp_call*() infrastructure to code that will read data from
hardware and return the value (or error status) in the rmid_read structure.
Sub-NUMA Cluster (SNC) mode adds files with new semantics. These require the
smp_call-ed code to sum event data from all domains that share an L3 cache.
Add a pointer to the L3 "cacheinfo" structure to struct rmid_read for the data
collection routines to use to pick the domains to be summed.
[ Reinette: the rmid_read structure has become complex enough so document each
of its fields and provide the kerneldoc documentation for struct rmid_read. ]
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-10-tony.luck@intel.com
|
|
When SNC is enabled, monitoring data is collected at the SNC node granularity,
but must be reported at L3-cache granularity for backwards compatibility in
addition to reporting at the node level.
Add a "ci" field to the rdt_mon_domain structure to save the cache information
about the enclosing L3 cache for the domain. This provides:
1) The cache id which is needed to compose the name of the legacy monitoring
directory, and to determine which domains should be summed to provide
L3-scoped data.
2) The shared_cpu_map which is needed to determine which CPUs can be used to
read the RMID counters with the MSR interface.
This is the first step to an eventual goal of monitor reporting files like this
(for a system with two SNC nodes per L3):
$ cd /sys/fs/resctrl/mon_data
$ tree mon_L3_00
mon_L3_00 <- 00 here is L3 cache id
├── llc_occupancy \ These files provide legacy support
├── mbm_local_bytes > for non-SNC aware monitor apps
├── mbm_total_bytes / that expect data at L3 cache level
├── mon_sub_L3_00 <- 00 here is SNC node id
│ ├── llc_occupancy \ These files are finer grained
│ ├── mbm_local_bytes > data from each SNC node
│ └── mbm_total_bytes /
└── mon_sub_L3_01
├── llc_occupancy \
├── mbm_local_bytes > As above, but for node 1.
└── mbm_total_bytes /
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-9-tony.luck@intel.com
|
|
systems
When SNC is enabled there is a mismatch between the MBA control function
which operates at L3 cache scope and the MBM monitor functions which
measure memory bandwidth on each SNC node.
Block use of the mba_MBps when scopes for MBA/MBM do not match.
Improve user diagnostics by adding invalfc() message when mba_MBps
is not supported.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-8-tony.luck@intel.com
|
|
Intel Sub-NUMA Cluster (SNC) is a feature that subdivides the CPU cores
and memory controllers on a socket into two or more groups. These are
presented to the operating system as NUMA nodes.
This may enable some workloads to have slightly lower latency to memory
as the memory controller(s) in an SNC node are electrically closer to the
CPU cores on that SNC node. This cost may be offset by lower bandwidth
since the memory accesses for each core can only be interleaved between
the memory controllers on the same SNC node.
Resctrl monitoring on an Intel system depends upon attaching RMIDs to tasks
to track L3 cache occupancy and memory bandwidth. There is an MSR that
controls how the RMIDs are shared between SNC nodes.
The default mode divides them numerically. E.g. when there are two SNC
nodes on a socket the lower number half of the RMIDs are given to the
first node, the remainder to the second node. This would be difficult
to use with the Linux resctrl interface as specific RMID values assigned
to resctrl groups are not visible to users.
RMID sharing mode divides the physical RMIDs evenly between SNC nodes
but uses a logical RMID in the IA32_PQR_ASSOC MSR. For example a system
with 200 physical RMIDs (as enumerated by CPUID leaf 0xF) that has two
SNC nodes per L3 cache instance would have 100 logical RMIDs available
for Linux to use. A task running on SNC node 0 with RMID 5 would
accumulate LLC occupancy and MBM bandwidth data in physical RMID 5.
Another task using RMID 5, but running on SNC node 1 would accumulate
data in physical RMID 105.
Even with this renumbering SNC mode requires several changes in resctrl
behavior for correct operation.
Add a static global to arch/x86/kernel/cpu/resctrl/monitor.c to indicate
how many SNC domains share an L3 cache instance. Initialize this to
"1". Runtime detection of SNC mode will adjust this value.
Update all places to take appropriate action when SNC mode is enabled:
1) The number of logical RMIDs per L3 cache available for use is the
number of physical RMIDs divided by the number of SNC nodes.
2) Likewise the "mon_scale" value must be divided by the number of SNC
nodes.
3) Add a function to convert from logical RMID values (assigned to
tasks and loaded into the IA32_PQR_ASSOC MSR on context switch)
to physical RMID values to load into IA32_QM_EVTSEL MSR when
reading counters on each SNC node.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-7-tony.luck@intel.com
|
|
Currently supported resctrl features are all domain scoped the same as the
scope of the L2 or L3 caches.
Add RESCTRL_L3_NODE as a new option for features that are scoped at the
same granularity as NUMA nodes. This is needed for Intel's Sub-NUMA
Cluster (SNC) feature where monitoring features are divided between
nodes that share an L3 cache.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-6-tony.luck@intel.com
|
|
The same rdt_domain structure is used for both control and monitor
functions. But this results in wasted memory as some of the fields are
only used by control functions, while most are only used for monitor
functions.
Split into separate rdt_ctrl_domain and rdt_mon_domain structures with
just the fields required for control and monitoring respectively.
Similar split of the rdt_hw_domain structure into rdt_hw_ctrl_domain
and rdt_hw_mon_domain.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-5-tony.luck@intel.com
|
|
Resctrl assumes that control and monitor operations on a resource are
performed at the same scope.
Prepare for systems that use different scope (specifically Intel needs
to split the RDT_RESOURCE_L3 resource to use L3 scope for cache control
and NODE scope for cache occupancy and memory bandwidth monitoring).
Create separate domain lists for control and monitor operations.
Note that errors during initialization of either control or monitor
functions on a domain would previously result in that domain being
excluded from both control and monitor operations. Now the domains are
allocated independently it is no longer required to disable both control
and monitor operations if either fail.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-4-tony.luck@intel.com
|
|
The rdt_domain structure is used for both control and monitor features.
It is about to be split into separate structures for these two usages
because the scope for control and monitoring features for a resource
will be different for future resources.
To allow for common code that scans a list of domains looking for a
specific domain id, move all the common fields ("list", "id", "cpu_mask")
into their own structure within the rdt_domain structure.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-3-tony.luck@intel.com
|
|
Resctrl resources operate on subsets of CPUs in the system with the
defining attribute of each subset being an instance of a particular
level of cache. E.g. all CPUs sharing an L3 cache would be part of the
same domain.
In preparation for features that are scoped at the NUMA node level,
change the code from explicit references to "cache_level" to a more
generic scope. At this point the only options for this scope are groups
of CPUs that share an L2 cache or L3 cache.
Clean up the error handling when looking up domains. Report invalid ids
before calling rdt_find_domain() in preparation for better messages when
scope can be other than cache scope. This means that rdt_find_domain()
will never return an error. So remove checks for error from the call sites.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-2-tony.luck@intel.com
|
|
Use a simple if-statement to replace the cumbersome goto-statement in
workqueue_set_unbound_cpumask().
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
In the ref-verify tool, when processing the inline references of an extent
item, we may end up returning with uninitialized return value, because:
1) The 'ret' variable is not initialized if there are no inline extent
references ('ptr' == 'end' before the while loop starts);
2) If we find an extent owner inline reference we don't initialize 'ret'.
So fix these cases by initializing 'ret' to 0 when declaring the variable
and set it to -EINVAL if we find an extent owner inline references and
simple quotas are not enabled (as well as print an error message).
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/59b40ebe-c824-457d-8b24-0bbca69d472b@gmail.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Syzbot reports the following regression detected by KASAN:
BUG: KASAN: slab-out-of-bounds in btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277
Read of size 8 at addr ffff88814628ca50 by task syz-executor318/5171
CPU: 0 PID: 5171 Comm: syz-executor318 Not tainted 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277
create_pending_snapshot+0x1359/0x29b0 fs/btrfs/transaction.c:1854
create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1922
btrfs_commit_transaction+0xf20/0x3740 fs/btrfs/transaction.c:2382
create_snapshot+0x6a1/0x9e0 fs/btrfs/ioctl.c:875
btrfs_mksubvol+0x58f/0x710 fs/btrfs/ioctl.c:1029
btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1075
__btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1340
btrfs_ioctl_snap_create_v2+0x1f2/0x3a0 fs/btrfs/ioctl.c:1422
btrfs_ioctl+0x99e/0xc60
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcbf1992509
RSP: 002b:00007fcbf1928218 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcbf1a1f618 RCX: 00007fcbf1992509
RDX: 0000000020000280 RSI: 0000000050009417 RDI: 0000000000000003
RBP: 00007fcbf1a1f610 R08: 00007ffea1298e97 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fcbf19eb660
R13: 00000000200002b8 R14: 00007fcbf19e60c0 R15: 0030656c69662f2e
</TASK>
And it also pinned it down to commit b5357cb268c4 ("btrfs: qgroup: do not
check qgroup inherit if qgroup is disabled").
[CAUSE]
That offending commit skips the whole qgroup inherit check if qgroup is
not enabled.
But that also skips the very basic checks like
num_ref_copies/num_excl_copies and the structure size checks.
Meaning if a qgroup enable/disable race is happening at the background,
and we pass a btrfs_qgroup_inherit structure when the qgroup is
disabled, the check would be completely skipped.
Then at the time of transaction commitment, qgroup is re-enabled and
btrfs_qgroup_inherit() is going to use the incorrect structure and
causing the above KASAN error.
[FIX]
Make btrfs_qgroup_check_inherit() only skip the source qgroup checks.
So that even if invalid btrfs_qgroup_inherit structure is passed in, we
can still reject invalid ones no matter if qgroup is enabled or not.
Furthermore we do already have an extra safety inside
btrfs_qgroup_inherit(), which would just ignore invalid qgroup sources,
so even if we only skip the qgroup source check we're still safe.
Reported-by: syzbot+a0d1f7e26910be4dc171@syzkaller.appspotmail.com
Fixes: b5357cb268c4 ("btrfs: qgroup: do not check qgroup inherit if qgroup is disabled")
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Make workqueue_unbound_exclude_cpumask() and workqueue_set_unbound_cpumask()
only update wq_isolated_cpumask and wq_requested_unbound_cpumask when
workqueue_apply_unbound_cpumask() returns successfully.
Fixes: fe28f631fa94("workqueue: Add workqueue_unbound_exclude_cpumask() to exclude CPUs from wq_unbound_cpumask")
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
calc_available_free_space() returns the total size of metadata (or
system) block groups, which can be allocated from unallocated disk
space. The logic is wrong on zoned mode in two places.
First, the calculation of data_chunk_size is wrong. We always allocate
one zone as one chunk, and no partial allocation of a zone. So, we
should use zone_size (= data_sinfo->chunk_size) as it is.
Second, the result "avail" may not be zone aligned. Since we always
allocate one zone as one chunk on zoned mode, returning non-zone size
aligned bytes will result in less pressure on the async metadata reclaim
process.
This is serious for the nearly full state with a large zone size device.
Allowing over-commit too much will result in less async reclaim work and
end up in ENOSPC. We can align down to the zone size to avoid that.
Fixes: cb6cbab79055 ("btrfs: adjust overcommit logic when very close to full")
CC: stable@vger.kernel.org # 6.9
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fully document enum misc_res_type with kernel-doc comments to prevent
kernel-doc warnings:
misc_cgroup.h:12: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Types of misc cgroup entries supported by the host.
misc_cgroup.h:12: warning: missing initial short description on line:
* Types of misc cgroup entries supported by the host.
Fixes: a72232eabdfc ("cgroup: Add misc cgroup controller")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: cgroups@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Use the .map_allock_check callback to perform allocation checks before
allocating memory for the devmap.
Signed-off-by: Florian Lehner <dev@der-flo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240615101158.57889-1-dev@der-flo.net
|
|
To avoid deferring probe smmu driver silently, record reason for it.
It can be checked through ../debugfs/devices_deferred as well:
/sys/kernel/debug# cat devices_deferred
15000000.iommu arm-smmu: qcom_scm not ready
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1719910870-25079-1-git-send-email-quic_zhenhuah@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Parse out the bitfields for easier-to-read fault messages.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20240701162025.375134-4-robdclark@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Handled faults can be "normal", don't spam dmesg about them.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20240701162025.375134-3-robdclark@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For consistency, add the "CB" prefix to the bitfield defines for context
registers.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20240701162025.375134-2-robdclark@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Update the devicetree bindings to support the gpu present in
X1E80100 platform.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/r/20240629015111.264564-5-quic_akhilpo@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that the s390x JIT supports arena, remove the respective tests from
the denylist.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-13-iii@linux.ibm.com
|
|
Check that __sync_*() functions don't cause kernel panics when handling
freed arena pages.
x86_64 does not support some arena atomics yet, and aarch64 may or may
not support them, based on the availability of LSE atomics at run time.
Do not enable this test for these architectures for simplicity.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-12-iii@linux.ibm.com
|
|
While clang uses __attribute__((address_space(1))) both for defining
arena pointers and arena globals, GCC requires different syntax for
both. While __arena covers the first use case, introduce __arena_global
to cover the second one.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-11-iii@linux.ibm.com
|
|
s390x supports most BPF atomics using single instructions, which
makes implementing arena support a matter of adding arena address to
the base register (unfortunately atomics do not support index
registers), and wrapping the respective native instruction in probing
sequences.
An exception is BPF_XCHG, which is implemented using two different
memory accesses and a loop. Make sure there is enough extable entries
for both instructions. Compute the base address once for both memory
accesses. Since on exception we need to land after the loop, emit the
nops manually.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-10-iii@linux.ibm.com
|
|
Now that BPF_PROBE_MEM32 and address space cast instructions are
implemented, tell the verifier that the JIT supports arena.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-9-iii@linux.ibm.com
|
|
The new address cast instruction translates arena offsets to userspace
addresses. NULL pointers must not be translated.
The common code sets up the mappings in such a way that it's enough to
replace the higher 32 bits to achieve the desired result. s390x has
just an instruction for this: INSERT IMMEDIATE.
Implement the sequence using 3 instruction: LOAD AND TEST, BRANCH
RELATIVE ON CONDITION and INSERT IMMEDIATE.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-8-iii@linux.ibm.com
|
|
BPF_PROBE_MEM32 is a new mode for LDX, ST and STX instructions. The JIT
is supposed to add the start address of the kernel arena mapping to the
%dst register, and use a probing variant of the respective memory
access.
Reuse the existing probing infrastructure for that. Put the arena
address into the literal pool, load it into %r1 and use that as an
index register. Do not clear any registers in ex_handler_bpf() for
failing ST and STX instructions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-7-iii@linux.ibm.com
|
|
Currently we land on the nop, which is unnecessary: we can just as well
begin executing the next instruction. Furthermore, the upcoming arena
support for the loop-based BPF_XCHG implementation will require landing
on an instruction that comes after the loop.
So land on the next JITed instruction, which covers both cases.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-6-iii@linux.ibm.com
|
|
Currently probe insns are handled by two "if" statements at the
beginning and at the end of bpf_jit_insn(). The first one needs to be
in sync with the huge insn->code statement that follows it, which was
not a problem so far, since the check is small.
The introduction of arena will make it significantly larger, and it
will no longer be obvious whether it is in sync with the opcode switch.
Move these statements to the new bpf_jit_probe_load_pre() and
bpf_jit_probe_post() functions, and call them only from cases that need
them.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-5-iii@linux.ibm.com
|
|
Commit 7fc8c362e782 ("s390/bpf: encode register within extable entry")
introduced explicit passing of the number of the register to be cleared
to ex_handler_bpf(), which replaced deducing it from the respective
native load instruction using get_probe_mem_regno().
Replace the second and last usage in the same manner, and remove this
function.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-4-iii@linux.ibm.com
|
|
The upcoming arena support for the loop-based BPF_XCHG implementation
requires emitting nop and extable entries separately. Move nop handling
into a separate function, and keep track of the nop offset.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-3-iii@linux.ibm.com
|
|
Zero-extending results of atomic probe operations fails with:
verifier bug. zext_dst is set, but no reg is defined
The problem is that insn_def_regno() handles BPF_ATOMICs, but not
BPF_PROBE_ATOMICs. Fix by adding the missing condition.
Fixes: d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-2-iii@linux.ibm.com
|
|
As Quentin said [0], BPF map pinning will fail if the pinmaps path is not
under the bpffs, like:
libbpf: specified path /home/ubuntu/test/sock_ops_map is not on BPF FS
Error: failed to pin all maps
[0] https://github.com/libbpf/bpftool/issues/146
Fixes: 3767a94b3253 ("bpftool: add pinmaps argument to the load/loadall")
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Quentin Monnet <qmo@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240702131150.15622-1-chen.dylane@gmail.com
|
|
Extend this WA to BMG GT as well. In this case media GT is
not affected. The cap frequencies and max allowed ggtt writes
are different as well. On BMG, we need to do a flush after 1100
GGTT writes, and we need to limit the GT frequency request
to 2133 Mhz during driver load and leave it at that value after
driver unloads.
v3: Fix checkpatch issue
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240701231529.2582452-2-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When skip_guc_pc is set and/or this is for a VF.
Fixes: 3b1592fb7835 ("drm/xe/lnl: Apply Wa_22019338487")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240701231529.2582452-1-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-test.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Fixes: da55da5a42d4 ("iommu/arm-smmu-v3: Make the kunit into a module")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240613-md-arm64-drivers-iommu-arm-arm-smmu-v3-v1-1-0e9f7584a5c8@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix warning seen with:
$ make allmodconfig && make W=1 C=1 lib/usercopy_kunit.ko
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/usercopy_kunit.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since arch_pick_mmap_layout() is an inline for non-MMU systems, disable
this test there.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406160505.uBge6TMY-lkp@intel.com/
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Combine the two cases that check for whether or not this is a bundle,
rather than having them as separate checks. This is easier to reduce,
and it reduces the text associated with it as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For bundle receives to function properly, the previous iteration msg_inq
value is needed to make a judgement call on how much data there is to
receive. A previous fix ended up clearing it earlier as an error case
would potentially errantly set IORING_CQE_F_SOCK_NONEMPTY if the request
got failed.
Move the assignment to post assigning buffers for the receive, but
ensure that it's cleared for the buffer selection error case. With that,
buffer selection has the right msg_inq value and can correctly bundle
receives as designed.
Noticed while testing where it was apparent than more than 1 buffer was
never received. After fix was in place, multiple buffers are correctly
picked for receive. This provides a 10x speedup for the test case, as
the buffer size used was 64b.
Fixes: 18414a4a2eab ("io_uring/net: assign kmsg inq/flags before buffer selection")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch modifies the definition of EBITMAP_BIT in
security/selinux/ss/ebitmap.h from 1ULL to 1UL to match the type
of elements in the ebitmap_node maps array.
This change does not affect the functionality or correctness of
the code but aims to enhance code quality by adhering to good
programming practices and avoiding unnecessary type conversions.
Signed-off-by: Canfeng Guo <guocanfeng@uniontech.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The top of the 2 level stream table is (at most) 128k entries big, and two
high order allocations are required. One of __le64 which is programmed
into the HW (1M), and one of struct arm_smmu_strtab_l1_desc which holds
the CPU pointer (3M).
There is no reason to store the l2ptr_dma as nothing reads it. devm stores
a copy of it and the DMA memory will be freed via devm mechanisms. span is
a constant of 8+1. Remove both.
This removes 16 bytes from each arm_smmu_l1_ctx_desc and saves up to 2M of
memory per iommu instance.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-318ed5f6983b+198f-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
dmam_alloc_coherent() already returns zero'd memory so cfg->strtab.l1_desc
(the list of DMA addresses for the L2 entries) is already zero'd.
arm_smmu_init_l1_strtab() goes through and calls
arm_smmu_write_strtab_l1_desc() on the newly allocated (and zero'd) struct
arm_smmu_strtab_l1_desc, which ends up computing 'val = 0' and zeroing it
again.
Remove arm_smmu_init_l1_strtab() and just call devm_kcalloc() from
arm_smmu_init_strtab_2lvl to allocate the companion struct.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-318ed5f6983b+198f-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that the venus clocks are fixed, we can add the DT node.
Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Link: https://lore.kernel.org/r/6d86a6a3-4d99-4fda-9a38-7688587237e6@freebox.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Ensure that info->sector_size and info->physical_sector_size are set
before the call to blkif_set_queue_limits by doing away with the
local variables and arguments that propagate them.
Thanks to Marek Marczykowski-Górecki and Jürgen Groß for root causing
the issue.
Fixes: ba3f67c11638 ("xen-blkfront: atomically update queue limits")
Reported-by: Rusty Bird <rustybird@net-c.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20240625055238.7934-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The description of the fua module parameter is defined using
MODULE_PARM_DESC() with the first argument passed being "zoned". That is
the wrong name, obviously. Fix that by using the correct "fua" parameter
name so that "modinfo null_blk" displays correct information.
Fixes: f4f84586c8b9 ("null_blk: Introduce fua attribute")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240702073234.206458-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
