summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-02mm: take memory hotplug lock within numa_zonelist_order_handler()Heiko Carstens
Andre Wild reported the following warning: WARNING: CPU: 2 PID: 1205 at kernel/cpu.c:240 lockdep_assert_cpus_held+0x4c/0x60 Modules linked in: CPU: 2 PID: 1205 Comm: bash Not tainted 4.13.0-rc2-00022-gfd2b2c57ec20 #10 Hardware name: IBM 2964 N96 702 (z/VM 6.4.0) task: 00000000701d8100 task.stack: 0000000073594000 Krnl PSW : 0704f00180000000 0000000000145e24 (lockdep_assert_cpus_held+0x4c/0x60) ... Call Trace: lockdep_assert_cpus_held+0x42/0x60) stop_machine_cpuslocked+0x62/0xf0 build_all_zonelists+0x92/0x150 numa_zonelist_order_handler+0x102/0x150 proc_sys_call_handler.isra.12+0xda/0x118 proc_sys_write+0x34/0x48 __vfs_write+0x3c/0x178 vfs_write+0xbc/0x1a0 SyS_write+0x66/0xc0 system_call+0xc4/0x2b0 locks held by bash/1205: #0: (sb_writers#4){.+.+.+}, at: vfs_write+0xa6/0x1a0 #1: (zl_order_mutex){+.+...}, at: numa_zonelist_order_handler+0x44/0x150 #2: (zonelists_mutex){+.+...}, at: numa_zonelist_order_handler+0xf4/0x150 Last Breaking-Event-Address: lockdep_assert_cpus_held+0x48/0x60 This can be easily triggered with e.g. echo n > /proc/sys/vm/numa_zonelist_order In commit 3f906ba23689a ("mm/memory-hotplug: switch locking to a percpu rwsem") memory hotplug locking was changed to fix a potential deadlock. This also switched the stop_machine() invocation within build_all_zonelists() to stop_machine_cpuslocked() which now expects that online cpus are locked when being called. This assumption is not true if build_all_zonelists() is being called from numa_zonelist_order_handler(). In order to fix this simply add a mem_hotplug_begin()/mem_hotplug_done() pair to numa_zonelist_order_handler(). Link: http://lkml.kernel.org/r/20170726111738.38768-1-heiko.carstens@de.ibm.com Fixes: 3f906ba23689a ("mm/memory-hotplug: switch locking to a percpu rwsem") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reported-by: Andre Wild <wild@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02mm/page_io.c: fix oops during block io poll in swapin pathTetsuo Handa
When a thread is OOM-killed during swap_readpage() operation, an oops occurs because end_swap_bio_read() is calling wake_up_process() based on an assumption that the thread which called swap_readpage() is still alive. Out of memory: Kill process 525 (polkitd) score 0 or sacrifice child Killed process 525 (polkitd) total-vm:528128kB, anon-rss:0kB, file-rss:4kB, shmem-rss:0kB oom_reaper: reaped process 525 (polkitd), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter coretemp ppdev pcspkr vmw_balloon sg shpchp vmw_vmci parport_pc parport i2c_piix4 ip_tables xfs libcrc32c sd_mod sr_mod cdrom ata_generic pata_acpi vmwgfx ahci libahci drm_kms_helper ata_piix syscopyarea sysfillrect sysimgblt fb_sys_fops mptspi scsi_transport_spi ttm e1000 mptscsih drm mptbase i2c_core libata serio_raw CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.0-rc2-next-20170725 #129 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 task: ffffffffb7c16500 task.stack: ffffffffb7c00000 RIP: 0010:__lock_acquire+0x151/0x12f0 Call Trace: <IRQ> lock_acquire+0x59/0x80 _raw_spin_lock_irqsave+0x3b/0x4f try_to_wake_up+0x3b/0x410 wake_up_process+0x10/0x20 end_swap_bio_read+0x6f/0xf0 bio_endio+0x92/0xb0 blk_update_request+0x88/0x270 scsi_end_request+0x32/0x1c0 scsi_io_completion+0x209/0x680 scsi_finish_command+0xd4/0x120 scsi_softirq_done+0x120/0x140 __blk_mq_complete_request_remote+0xe/0x10 flush_smp_call_function_queue+0x51/0x120 generic_smp_call_function_single_interrupt+0xe/0x20 smp_trace_call_function_single_interrupt+0x22/0x30 smp_call_function_single_interrupt+0x9/0x10 call_function_single_interrupt+0xa7/0xb0 </IRQ> RIP: 0010:native_safe_halt+0x6/0x10 default_idle+0xe/0x20 arch_cpu_idle+0xa/0x10 default_idle_call+0x1e/0x30 do_idle+0x187/0x200 cpu_startup_entry+0x6e/0x70 rest_init+0xd0/0xe0 start_kernel+0x456/0x477 x86_64_start_reservations+0x24/0x26 x86_64_start_kernel+0xf7/0x11a secondary_startup_64+0xa5/0xa5 Code: c3 49 81 3f 20 9e 0b b8 41 bc 00 00 00 00 44 0f 45 e2 83 fe 01 0f 87 62 ff ff ff 89 f0 49 8b 44 c7 08 48 85 c0 0f 84 52 ff ff ff <f0> ff 80 98 01 00 00 8b 3d 5a 49 c4 01 45 8b b3 18 0c 00 00 85 RIP: __lock_acquire+0x151/0x12f0 RSP: ffffa01f39e03c50 ---[ end trace 6c441db499169b1e ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x36000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt Fix it by holding a reference to the thread. [akpm@linux-foundation.org: add comment] Fixes: 23955622ff8d231b ("swap: add block io poll in swapin path") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Shaohua Li <shli@fb.com> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jens Axboe <axboe@fb.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02zram: do not free pool->size_classMinchan Kim
Mike reported kernel goes oops with ltp:zram03 testcase. zram: Added device: zram0 zram0: detected capacity change from 0 to 107374182400 BUG: unable to handle kernel paging request at 0000306d61727a77 IP: zs_map_object+0xb9/0x260 PGD 0 P4D 0 Oops: 0000 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: zram(E) xfs(E) libcrc32c(E) btrfs(E) xor(E) raid6_pq(E) loop(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) af_packet(E) br_netfilter(E) bridge(E) stp(E) llc(E) iscsi_ibft(E) iscsi_boot_sysfs(E) nls_iso8859_1(E) nls_cp437(E) vfat(E) fat(E) intel_powerclamp(E) coretemp(E) cdc_ether(E) kvm_intel(E) usbnet(E) mii(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) iTCO_wdt(E) ghash_clmulni_intel(E) bnx2(E) iTCO_vendor_support(E) pcbc(E) ioatdma(E) ipmi_ssif(E) aesni_intel(E) i5500_temp(E) i2c_i801(E) aes_x86_64(E) lpc_ich(E) shpchp(E) mfd_core(E) crypto_simd(E) i7core_edac(E) dca(E) glue_helper(E) cryptd(E) ipmi_si(E) button(E) acpi_cpufreq(E) ipmi_devintf(E) pcspkr(E) ipmi_msghandler(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) ext4(E) crc16(E) mbcache(E) jbd2(E) sd_mod(E) ata_generic(E) i2c_algo_bit(E) ata_piix(E) drm_kms_helper(E) ahci(E) syscopyarea(E) sysfillrect(E) libahci(E) sysimgblt(E) fb_sys_fops(E) uhci_hcd(E) ehci_pci(E) ttm(E) ehci_hcd(E) libata(E) drm(E) megaraid_sas(E) usbcore(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) efivarfs(E) autofs4(E) [last unloaded: zram] CPU: 6 PID: 12356 Comm: swapon Tainted: G E 4.13.0.g87b2c3f-default #194 Hardware name: IBM System x3550 M3 -[7944K3G]-/69Y5698 , BIOS -[D6E150AUS-1.10]- 12/15/2010 task: ffff880158d2c4c0 task.stack: ffffc90001680000 RIP: 0010:zs_map_object+0xb9/0x260 Call Trace: zram_bvec_rw.isra.26+0xe8/0x780 [zram] zram_rw_page+0x6e/0xa0 [zram] bdev_read_page+0x81/0xb0 do_mpage_readpage+0x51a/0x710 mpage_readpages+0x122/0x1a0 blkdev_readpages+0x1d/0x20 __do_page_cache_readahead+0x1b2/0x270 ondemand_readahead+0x180/0x2c0 page_cache_sync_readahead+0x31/0x50 generic_file_read_iter+0x7e7/0xaf0 blkdev_read_iter+0x37/0x40 __vfs_read+0xce/0x140 vfs_read+0x9e/0x150 SyS_read+0x46/0xa0 entry_SYSCALL_64_fastpath+0x1a/0xa5 Code: 81 e6 00 c0 3f 00 81 fe 00 00 16 00 0f 85 9f 01 00 00 0f b7 13 65 ff 05 5e 07 dc 7e 66 c1 ea 02 81 e2 ff 01 00 00 49 8b 54 d4 08 <8b> 4a 48 41 0f af ce 81 e1 ff 0f 00 00 41 89 c9 48 c7 c3 a0 70 RIP: zs_map_object+0xb9/0x260 RSP: ffffc90001683988 CR2: 0000306d61727a77 He bisected the problem is [1]. After commit cf8e0fedf078 ("mm/zsmalloc: simplify zs_max_alloc_size handling"), zram doesn't use double pointer for pool->size_class any more in zs_create_pool so counter function zs_destroy_pool don't need to free it, either. Otherwise, it does kfree wrong address and then, kernel goes Oops. Link: http://lkml.kernel.org/r/20170725062650.GA12134@bbox Fixes: cf8e0fedf078 ("mm/zsmalloc: simplify zs_max_alloc_size handling") Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Mike Galbraith <efault@gmx.de> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02kthread: fix documentation build warningJonathan Corbet
The kerneldoc comment for kthread_create() had an incorrect argument name, leading to a warning in the docs build. Correct it, and make one more small step toward a warning-free build. Link: http://lkml.kernel.org/r/20170724135916.7f486c6f@lwn.net Signed-off-by: Jonathan Corbet <corbet@lwn.net> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02kasan: avoid -Wmaybe-uninitialized warningArnd Bergmann
gcc-7 produces this warning: mm/kasan/report.c: In function 'kasan_report': mm/kasan/report.c:351:3: error: 'info.first_bad_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] print_shadow_for_address(info->first_bad_addr); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mm/kasan/report.c:360:27: note: 'info.first_bad_addr' was declared here The code seems fine as we only print info.first_bad_addr when there is a shadow, and we always initialize it in that case, but this is relatively hard for gcc to figure out after the latest rework. Adding an intialization to the most likely value together with the other struct members shuts up that warning. Fixes: b235b9808664 ("kasan: unify report headers") Link: https://patchwork.kernel.org/patch/9641417/ Link: http://lkml.kernel.org/r/20170725152739.4176967-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Alexander Potapenko <glider@google.com> Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02userfaultfd: non-cooperative: notify about unmap of destination during mremapMike Rapoport
When mremap is called with MREMAP_FIXED it unmaps memory at the destination address without notifying userfaultfd monitor. If the destination were registered with userfaultfd, the monitor has no way to distinguish between the old and new ranges and to properly relate the page faults that would occur in the destination region. Fixes: 897ab3e0c49e ("userfaultfd: non-cooperative: add event for memory unmaps") Link: http://lkml.kernel.org/r/1500276876-3350-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02mm, mprotect: flush TLB if potentially racing with a parallel reclaim ↵Mel Gorman
leaving stale TLB entries Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.de Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> [v4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02pid: kill pidhash_size in pidhash_init()Kefeng Wang
After commit 3d375d78593c ("mm: update callers to use HASH_ZERO flag"), drop unused pidhash_size in pidhash_init(). Link: http://lkml.kernel.org/r/1500389267-49222-1-git-send-email-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Pavel Tatashin <Pasha.Tatashin@Oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02mm/hugetlb.c: __get_user_pages ignores certain follow_hugetlb_page errorsDaniel Jordan
Commit 9a291a7c9428 ("mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified") causes __get_user_pages to ignore certain errors from follow_hugetlb_page. After such error, __get_user_pages subsequently calls faultin_page on the same VMA and start address that follow_hugetlb_page failed on instead of returning the error immediately as it should. In follow_hugetlb_page, when hugetlb_fault returns a value covered under VM_FAULT_ERROR, follow_hugetlb_page returns it without setting nr_pages to 0 as __get_user_pages expects in this case, which causes the following to happen in __get_user_pages: the "while (nr_pages)" check succeeds, we skip the "if (!vma..." check because we got a VMA the last time around, we find no page with follow_page_mask, and we call faultin_page, which calls hugetlb_fault for the second time. This issue also slightly changes how __get_user_pages works. Before, it only returned error if it had made no progress (i = 0). But now, follow_hugetlb_page can clobber "i" with an error code since its new return path doesn't check for progress. So if "i" is nonzero before a failing call to follow_hugetlb_page, that indication of progress is lost and __get_user_pages can return error even if some pages were successfully pinned. To fix this, change follow_hugetlb_page so that it updates nr_pages, allowing __get_user_pages to fail immediately and restoring the "error only if no progress" behavior to __get_user_pages. Tested that __get_user_pages returns when expected on error from hugetlb_fault in follow_hugetlb_page. Fixes: 9a291a7c9428 ("mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified") Link: http://lkml.kernel.org/r/1500406795-58462-1-git-send-email-daniel.m.jordan@oracle.com Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: James Morse <james.morse@arm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: <stable@vger.kernel.org> [4.12.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-03drm: arcpgu: Allow some clock deviation in crtc->mode_valid() callbackJose Abreu
Currently we expect that clock driver produces the exact same value as we are requiring. There can, and will, be some deviation however so we need to take that into account instead of just rejecting the mode. According to the HDMI spec we have a max of +-0.5% for the pixel clock frequency deviation. Lets take that into an advantage and use it to calculate how much deviation we can support. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-08-03drm: arcpgu: Fix module unloadJose Abreu
At module unload we are expecting a struct drm_device but at probing we are not setting it right. Fix this and correct the arcpgu module unload. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: 0c4250e7b15e ("drm: Add support of ARC PGU display controller") Cc: Carlos Palminha <palminha@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-08-03drm: arcpgu: Fix mmap() callbackJose Abreu
Now that ARC properly supports DMA mmap() we can use the standard CMA helper to map dumb buffers. This makes ARC PGU works with standard DRM consumer applications like, for example, mpv/mplayer via DRM. While at it, use the DEFINE_DRM_GEM_CMA_FOPS() helper. This fixes the use of dumb buffers. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: 0c4250e7b15e ("drm: Add support of ARC PGU display controller") Cc: Carlos Palminha <palminha@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-08-03arcpgu: Simplify driver nameAlexey Brodkin
This very minor change is still useful because it aligns ARC PGU driver name with other DRM drivers and makes usage of that driver name a bit easier. For example in libdrm's test app we'll use "arcpgu" instead of a bit more ugly "drm-arcpgu". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-08-03drm/arcpgu: Opt in debugfsAlexey Brodkin
This change adopts debugfs usage for outputting useful data. As of today we print: * Mode and real HW clock values * Standard FB info Code is heavily borrowed from ARM's HDLCD thus adding Liviu in Cc. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Jose Abreu <joabreu@synopsys.com>
2017-08-02KVM: nVMX: mark vmcs12 pages dirty on L2 exitDavid Matlack
The host physical addresses of L1's Virtual APIC Page and Posted Interrupt descriptor are loaded into the VMCS02. The CPU may write to these pages via their host physical address while L2 is running, bypassing address-translation-based dirty tracking (e.g. EPT write protection). Mark them dirty on every exit from L2 to prevent them from getting out of sync with dirty tracking. Also mark the virtual APIC page and the posted interrupt descriptor dirty when KVM is virtualizing posted interrupt processing. Signed-off-by: David Matlack <dmatlack@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02kvm: nVMX: don't flush VMCS12 during VMXOFF or VCPU teardownDavid Matlack
According to the Intel SDM, software cannot rely on the current VMCS to be coherent after a VMXOFF or shutdown. So this is a valid way to handle VMCS12 flushes. 24.11.1 Software Use of Virtual-Machine Control Structures ... If a logical processor leaves VMX operation, any VMCSs active on that logical processor may be corrupted (see below). To prevent such corruption of a VMCS that may be used either after a return to VMX operation or on another logical processor, software should execute VMCLEAR for that VMCS before executing the VMXOFF instruction or removing power from the processor (e.g., as part of a transition to the S3 and S4 power states). ... This fixes a "suspicious rcu_dereference_check() usage!" warning during kvm_vm_release() because nested_release_vmcs12() calls kvm_vcpu_write_guest_page() without holding kvm->srcu. Signed-off-by: David Matlack <dmatlack@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02KVM: nVMX: do not pin the VMCS12Paolo Bonzini
Since the current implementation of VMCS12 does a memcpy in and out of guest memory, we do not need current_vmcs12 and current_vmcs12_page anymore. current_vmptr is enough to read and write the VMCS12. And David Matlack noted: This patch also fixes dirty tracking (memslot->dirty_bitmap) of the VMCS12 page by using kvm_write_guest. nested_release_page() only marks the struct page dirty. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> [Added David Matlack's note and nested_release_page_clean() fix.] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02KVM: avoid using rcu_dereference_protectedPaolo Bonzini
During teardown, accesses to memslots and buses are using rcu_dereference_protected with an always-true condition because these accesses are done outside the usual mutexes. This is because the last reference is gone and there cannot be any concurrent modifications, but rcu_dereference_protected is ugly and unobvious. Instead, check the refcount in kvm_get_bus and __kvm_memslots. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02KVM: X86: init irq->level in kvm_pv_kick_cpu_opLongpeng(Mike)
'lapic_irq' is a local variable and its 'level' field isn't initialized, so 'level' is random, it doesn't matter but makes UBSAN unhappy: UBSAN: Undefined behaviour in .../lapic.c:... load of value 10 is not a valid value for type '_Bool' ... Call Trace: [<ffffffff81f030b6>] dump_stack+0x1e/0x20 [<ffffffff81f03173>] ubsan_epilogue+0x12/0x55 [<ffffffff81f03b96>] __ubsan_handle_load_invalid_value+0x118/0x162 [<ffffffffa1575173>] kvm_apic_set_irq+0xc3/0xf0 [kvm] [<ffffffffa1575b20>] kvm_irq_delivery_to_apic_fast+0x450/0x910 [kvm] [<ffffffffa15858ea>] kvm_irq_delivery_to_apic+0xfa/0x7a0 [kvm] [<ffffffffa1517f4e>] kvm_emulate_hypercall+0x62e/0x760 [kvm] [<ffffffffa113141a>] handle_vmcall+0x1a/0x30 [kvm_intel] [<ffffffffa114e592>] vmx_handle_exit+0x7a2/0x1fa0 [kvm_intel] ... Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02KVM: X86: Fix loss of pending INIT due to raceWanpeng Li
When SMP VM start, AP may lost INIT because of receiving INIT between kvm_vcpu_ioctl_x86_get/set_vcpu_events. vcpu 0 vcpu 1 kvm_vcpu_ioctl_x86_get_vcpu_events events->smi.latched_init = 0 send INIT to vcpu1 set vcpu1's pending_events kvm_vcpu_ioctl_x86_set_vcpu_events if (events->smi.latched_init == 0) clear INIT in pending_events This patch fixes it by just update SMM related flags if we are in SMM. Thanks Peng Hao for the report and original commit message. Reported-by: Peng Hao <peng.hao2@zte.com.cn> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02drm/amdgpu: Use list_del_init in amdgpu_mn_unregisterFelix Kuehling
Otherwise bo->shadow_list (which is aliased by bo->mn_list) will not appear empty in amdgpu_ttm_bo_destroy and cause an oops when freeing former userptr BOs. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-02drm/amdgpu: Fix undue fallthroughs in golden registers initializationJean Delvare
As I was staring at the si_init_golden_registers code, I noticed that the Pitcairn initialization silently falls through the Cape Verde initialization, and the Oland initialization falls through the Hainan initialization. However there is no comment stating that this is intentional, and the radeon driver doesn't have any such fallthrough, so I suspect this is not supposed to happen. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10") Cc: Ken Wang <Qingqing.Wang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Marek Olšák" <maraeo@gmail.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2017-08-02tcp: avoid setting cwnd to invalid ssthresh after cwnd reduction statesYuchung Cheng
If the sender switches the congestion control during ECN-triggered cwnd-reduction state (CA_CWR), upon exiting recovery cwnd is set to the ssthresh value calculated by the previous congestion control. If the previous congestion control is BBR that always keep ssthresh to TCP_INIFINITE_SSTHRESH, cwnd ends up being infinite. The safe step is to avoid assigning invalid ssthresh value when recovery ends. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02ibmvnic: Initialize SCRQ's during login renegotiationThomas Falcon
SCRQ resources are freed during renegotiation, but they are not re-allocated afterwards due to some changes in the initialization process. Fix that by re-allocating the memory after renegotation. SCRQ's can also be freed if a server capabilities request fails. If this were encountered during a device reset for example, SCRQ's may not be re-allocated. This operation is not necessary anymore so remove it. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02usb: qmi_wwan: add D-Link DWM-222 device IDHector Martin
Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02Merge branch 'mlx4-misc-fixes'David S. Miller
Tariq Toukan says: ==================== mlx4 misc fixes This patchset contains misc bug fixes from the team to the mlx4 Core and Eth drivers. Patch 1 by Inbar fixes a wrong ethtool indication for Wake-on-LAN. The other 3 patches by Jack add a missing capability description, and fixes the off-by-1 misalignment for the following capabilities descriptions. Series generated against net commit: cc75f8514db6 samples/bpf: fix bpf tunnel cleanup ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net/mlx4_core: Fixes missing capability bit in flags2 capability dumpJack Morgenstein
The cited commit introduced the following new enum value in file include/linux/mlx4/device.h: QUERY_DEV_CAP_DIAG_RPRT_PER_PORT However, it failed to introduce a corresponding entry in function dump_dev_cap_flags2() for outputting a line in the message log when this capability bit is set. The change here fixes that omission. Fixes: c7c122ed67e4 ("net/mlx4: Add diagnostic counters capability bit") Reported-by: Mukesh Kacker <mukesh.kacker@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net/mlx4_core: Fix namespace misalignment in QinQ VST support commitJack Morgenstein
The cited commit introduced the following new enum value in file include/linux/mlx4/device.h: MLX4_DEV_CAP_FLAG2_SVLAN_BY_QP However the value of MLX4_DEV_CAP_FLAG2_SVLAN_BY_QP needs to stay consistent with the value used in another namespace in function dump_dev_cap_flags2(), which is manually kept in sync. The change here restores that consistency. Fixes: 7c3d21c8153c ("net/mlx4_core: Preparation for VF vlan protocol 802.1ad") Reported-by: Mukesh Kacker <mukesh.kacker@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net/mlx4_core: Fix sl_to_vl_change bit offset in flags2 dumpJack Morgenstein
The index value in function dump_dev_cap_flags2() for outputting "sl to vl mapping table change event support" needs to be consistent with the value of the enumerated constant MLX4_DEV_CAP_FLAG2_SL_TO_VL_CHANGE_EVENT defined in file include/linux/mlx4_device.h The change here restores that consistency. Fixes: fd10ed8e6f42 ("IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets") Reported-by: Mukesh Kacker <mukesh.kacker@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net/mlx4_en: Fix wrong indication of Wake-on-LAN (WoL) supportInbar Karmy
Currently when WoL is supported but disabled, ethtool reports: "Supports Wake-on: d". Fix the indication of Wol support, so that the indication remains "g" all the time if the NIC supports WoL. Tested: As accepted, when NIC supports WoL- ethtool reports: Supports Wake-on: g Wake-on: d when NIC doesn't support WoL- ethtool reports: Supports Wake-on: d Wake-on: d Fixes: 14c07b1358ed ("mlx4: Wake on LAN support") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02Merge branch 'lan78xx-Fixes'David S. Miller
Nisar Sayed says: ==================== lan78xx: Fixes to lan78xx driver This series of patches are for lan78xx driver. These patches fixes potential issues associated with lan78xx driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02lan78xx: Fix to handle hard_header_len updateNisar Sayed
Fix to handle hard_header_len update When ifconfig up/down sequence is initiated hard_header_len get updated incrementally for each ifconfig up /down sequence, this leads invalid hard_header_len, moving to lan78xx_bind to have one time update of hard_header_len addresses the issue. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02lan78xx: USB fast connect/disconnect crash fixNisar Sayed
USB fast connect/disconnect crash fix When USB plugged/unplugged at fast rate, lan78xx_mdio_init() in lan78xx_bind() failing case is not handled. Whenever lan78xx_mdio_init() failed, dev->mdiobus will be freed, however since lan78xx_bind() not consider as error and try to proceed for further initialization in lan78xx_probe() which leads system hung/crash. Also when register_netdev() failed, netdev is freed without calling lan78xx_unbind(). Hence halting the failed cases right manner fixes the system crash/hung issue. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issueMarc Zyngier
The Renesas uPD72020x XHCI controller seems to suffer from a really annoying bug, where it may retain some of its DMA programming across a XHCI reset, and despite the driver correctly programming new DMA addresses. This is visible if the device has been using 64-bit DMA addresses, and is then switched to using 32-bit DMA addresses. The top 32 bits of the address (now zero) are ignored are replaced by the 32 bits from the *previous* programming. Sticking with 64-bit DMA always works, but doesn't seem very appropriate. A PCI reset of the device restores the normal functionality, which is done at probe time. Unfortunately, this has to be done before any quirk has been discovered, hence the intrusive nature of the fix. Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> CC: stable@vger.kernel.org # v4.11+
2017-08-02Merge tag 'platform-drivers-x86-v4.13-3' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Fix two bugs under error or abnormal usage conditions. Correct a config dependency: dell-wmi: - Fix driver interface version query wmi: - Fix error handling in acpi_wmi_init() peaq-wmi: - select INPUT_POLLDEV" * tag 'platform-drivers-x86-v4.13-3' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: dell-wmi: Fix driver interface version query platform/x86: wmi: Fix error handling in acpi_wmi_init() platform/x86: peaq-wmi: select INPUT_POLLDEV
2017-08-02Merge tag 'sunxi-clk-fixes-for-4.13' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Pull one Allwinner clock fix from Chen-Yu Tsai: One critical clock fix for sun5i (A10s/A13/R8) which enables propagation of clock rate changes from the "cpu" clock to it's parent PLL clock. This fixes cpufreq related crashes that have been observed on KernelCI with the C.H.I.P. and multi_v7_defconfig. * tag 'sunxi-clk-fixes-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: sun5i: Add clk_set_rate_parent to the CPU clock
2017-08-02Merge tag 'meson-clk-fixes-for-4.13-rc4-v2' of ↵Stephen Boyd
git://github.com/baylibre/clk-meson into clk-fixes Pull one Meson clock fix from Neil Armstrong * tag 'meson-clk-fixes-for-4.13-rc4-v2' of git://github.com/baylibre/clk-meson: clk: meson: mpll: fix mpll0 fractional part ignored
2017-08-02Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "These seven patches are mostly minor build, Kconfig and error leg fixes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Fix return code in qedi_ep_connect() scsi: lpfc: fix linking against modular NVMe support scsi: scsi_transport_fc: return -EBUSY for deleted vport scsi: libcxgbi: add check for valid cxgbi_task_data scsi: aic7xxx: fix firmware build with O=path scsi: megaraid_sas: fix memleak in megasas_alloc_cmdlist_fusion scsi: qedi: Add ISCSI_BOOT_SYSFS to Kconfig
2017-08-02Merge tag 'asoc-fix-v4.13-rc3' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.13 Quite a few fixes here that have been sent since the merge window, the biggest one is the fix from Tony for some confusion with the device property API which was causing issues with the of-graph card. This is fixed with some changes in the graph API itself as it seemed very likely to be error prone.
2017-08-02blk-mq: don't leak preempt counter/q_usage_counter when allocating rq failedMing Lei
When blk_mq_get_request() failed, preempt counter isn't released, and blk_mq_make_request() doesn't release the counter too. This patch fixes the issue, and makes sure that preempt counter is only held if rq is allocated successfully. The same policy is applied on .q_usage_counter too. Signed-off-by: Ming Lei <minlei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-02ARM64: dts: marvell: armada-37xx: Fix the number of GPIO on south bridgeGregory CLEMENT
The number of pins in South Bridge is 30 and not 29. There is a fix for the driver for the pinctrl, but a fix is also need at device tree level for the GPIO. Fixes: afda007feda5 ("ARM64: dts: marvell: Add pinctrl nodes for Armada 3700") Cc: <stable@vger.kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-02NFSv4: Fix double frees in nfs4_test_session_trunk()Trond Myklebust
rpc_clnt_add_xprt() expects the callback function to be synchronous, and expects to release the transport and switch references itself. Fixes: 04fa2c6bb51b1 ("NFS pnfs data server multipath session trunking") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-08-02ALSA: hda - Fix speaker output from VAIO VPCL14M1RSergei A. Trusov
Sony VAIO VPCL14M1R needs the quirk to make the speaker working properly. Tested-by: Dmitriy <mexx400@yandex.ru> Cc: <stable@vger.kernel.org> Signed-off-by: Sergei A. Trusov <sergei.a.trusov@ya.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-02powerpc/83xx/mpc832x_rdb: fix of_irq_to_resource() error checkSergei Shtylyov
of_irq_to_resource() has recently been fixed to return negative error #'s along with 0 in case of failure, however the Freescale MPC832x RDB board code still only regards 0 as a failure indication -- fix it up. Fixes: 7a4228bbff76 ("of: irq: use of_irq_get() in of_irq_to_resource()") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-02gpio: tegra: fix unbalanced chained_irq_enter/exitMichał Mirosław
When more than one GPIO IRQs are triggered simultaneously, tegra_gpio_irq_handler() called chained_irq_exit() multiple times for one chained_irq_enter(). Fixes: 3c92db9ac0ca3eee8e46e2424b6c074e2e394ad9 Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> [Also changed the variable to a bool] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-02mtd: nand: atmel: Fix EDO mode checkBoris Brezillon
EDO mode should be used when tRC is less than 30ns, but timings are expressed in picoseconds in the nand_sdr_timings struct. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: f9ce2eddf176 ("mtd: nand: atmel: Add ->setup_data_interface() hooks") Reported-by: Alexander Dahl <ada@thorsis.com> Tested-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-08-02mtd: nand: Declare tBERS, tR and tPROG as u64 to avoid integer overflowBoris Brezillon
All timings in nand_sdr_timings are expressed in picoseconds but some of them may not fit in an u32. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 204e7ecd47e2 ("mtd: nand: Add a few more timings to nand_sdr_timings") Reported-by: Alexander Dahl <ada@thorsis.com> Cc: <stable@vger.kernel.org> Reviewed-by: Alexander Dahl <ada@thorsis.com> Tested-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-08-02mtd: nand: Fix timing setup for NANDs that do not support SET FEATURESBoris Brezillon
Some ONFI NANDs do not support the SET/GET FEATURES commands, which, according to the spec, is perfectly valid. On these NANDs we can't set a specific timing mode using the "timing mode" feature, and we should assume the NAND does not require any setup to enter a specific timing mode. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: d8e725dd8311 ("mtd: nand: automate NAND timings selection") Reported-by: Alexander Dahl <ada@thorsis.com> Cc: <stable@vger.kernel.org> Tested-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-08-02mtd: nand: Fix a docs build warningJonathan Corbet
Commit 0b4773fd1649 (mtd: nand: Drop unused cached programming support) removed the "cached" parameter from nand_write_page(), but did not update the kerneldoc comments, creating this docs build warning: ./drivers/mtd/nand/nand_base.c:2751: warning: Excess function parameter 'cached' description in 'nand_write_page' Remove the offending line so we can have a little peace and quiet. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-08-02mtd: nand: sunxi: fix potential divide-by-zero errorBryan O'Donoghue
clk_round_rate() can return <= 0. Currently the value returned by clk_round_rate() is used directly for a division. This patch introduces a guard to ensure a divide-by-zero or a divide by a negative number for that matter can't happen by bugging out returning -EINVAL if clk_round_rate() returns <= 0. Fixes: 2d43457f79e4 ("mtd: nand: sunxi: fix EDO mode selection") Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
generated by cgit (git 2.34.1) at 2025-09-13 23:19:34 +0000