summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-30ACPI: CPPC: Add CPPC enable register functionJinzhou Su
Add a new function to enable CPPC feature. This function will write Continuous Performance Control package EnableRegister field on the processor. CPPC EnableRegister register described in section 8.4.7.1 of ACPI 6.4: This element is optional. If supported, contains a resource descriptor with a single Register() descriptor that describes a register to which OSPM writes a One to enable CPPC on this processor. Before this register is set, the processor will be controlled by legacy mechanisms (ACPI Pstates, firmware, etc.). This register will be used for AMD processors to enable AMD P-State function instead of legacy ACPI P-States. Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30ACPI: CPPC: Check present CPUs for determining _CPC is validMario Limonciello
As this is a static check, it should be based upon what is currently present on the system. This makes probeing more deterministic. While local APIC flags field (lapic_flags) of cpu core in MADT table is 0, then the cpu core won't be enabled. In this case, _CPC won't be found in this core, and return back to _CPC invalid with walking through possible cpus (include disable cpus). This is not expected, so switch to check present CPUs instead. Reported-by: Jinzhou Su <Jinzhou.Su@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30ACPI: CPPC: Implement support for SystemIO registersSteven Noonan
According to the ACPI v6.2 (and later) specification, SystemIO can be used for _CPC registers. This teaches cppc_acpi how to handle such registers. This patch was tested using the amd_pstate driver on my Zephyrus G15 (model GA503QS) using the current version 410 BIOS, which uses a SystemIO register for the HighestPerformance element in _CPC. Signed-off-by: Steven Noonan <steven@valvesoftware.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30x86/msr: Add AMD CPPC MSR definitionsHuang Rui
AMD CPPC (Collaborative Processor Performance Control) function uses MSR registers to manage the performance hints. So add the MSR register macro here. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30Merge tag 'usb-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds
Pull USB fixes from Greg KH: "Here are some small USB driver fixes for 5.16 to resolve some reported problems: - mtu3 driver fixes - typec ucsi driver fix - xhci driver quirk added - usb gadget f_fs fix for reported crash All of these have been in linux-next for a while with no reported problems" * tag 'usb-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Only check the contract if there is a connection xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set. usb: mtu3: set interval of FS intr and isoc endpoint usb: mtu3: fix list_head check warning usb: mtu3: add memory barrier before set GPD's HWO usb: mtu3: fix interval value for intr and isoc usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.
2021-12-30ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodesHans de Goede
BCM4752 and LNV4752 ACPI nodes describe a Broadcom 4752 GPS module attached to an UART of the system. The GPS modules talk a custom protocol which only works with a closed- source Android gpsd daemon which knows this protocol. The ACPI nodes also describe GPIOs to turn the GPS on/off these are handled by the net/rfkill/rfkill-gpio.c code. This handling predates the addition of enumeration of ACPI instantiated serdevs to the kernel and was broken by that addition, because the ACPI scan code now no longer instantiates platform_device-s for these nodes. Rename the i2c_multi_instantiate_ids HID list to ignore_serial_bus_ids and add the BCM4752 and LNV4752 HIDs, so that rfkill-gpio gets a platform_device to bind to again; and so that a tty cdev for gpsd gets created for these. Fixes: e361d1f85855 ("ACPI / scan: Fix enumeration for special UART devices") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc commentYang Li
Add the description of @support and remove @req in acpi_pci_osc_control_set() kernel-doc comment to remove warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/acpi/pci_root.c:337: warning: Excess function parameter 'req' description in 'acpi_pci_osc_control_set' drivers/acpi/pci_root.c:337: warning: Function parameter or member 'support' not described in 'acpi_pci_osc_control_set' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 6bc779ee05d4 ("PCI/ACPI: Check for _OSC support in acpi_pci_osc_control_set()") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30ACPI: battery: Add the ThinkPad "Not Charging" quirkThomas Weißschuh
The EC/ACPI firmware on Lenovo ThinkPads used to report a status of "Unknown" when the battery is between the charge start and charge stop thresholds. On Windows, it reports "Not Charging" so the quirk has been added to also report correctly. Now the "status" attribute returns "Not Charging" when the battery on ThinkPads is not physicaly charging. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature ↵Huang Rui
flag Add Collaborative Processor Performance Control feature flag for AMD processors. This feature flag will be used on the following AMD P-State driver. The AMD P-State driver has two approaches to implement the frequency control behavior. That depends on the CPU hardware implementation. One is "Full MSR Support" and another is "Shared Memory Support". The feature flag indicates the current processors with "Full MSR Support". Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30thermal/drivers/int340x: Fix RFIM mailbox write commandsSumeet Pawnikar
The existing mail mechanism only supports writing of workload types. However, mailbox command for RFIM (cmd = 0x08) also requires write operation which is ignored. This results in failing to store RFI restriction. Fixint this requires enhancing mailbox writes for non workload commands too, so remove the check for MBOX_CMD_WORKLOAD_TYPE_WRITE in mailbox write to allow this other write commands to be supoorted. At the same time, however, we have to make sure that there is no impact on read commands, by avoiding to write anything into the mailbox data register. To properly implement that, add two separate functions for mbox read and write commands for the processor thermal workload command type. This helps to distinguish the read and write workload command types from each other while sending mbox commands. Fixes: 5d6fbc96bd36 ("thermal/drivers/int340x: processor_thermal: Export additional attributes") Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Cc: 5.14+ <stable@vger.kernel.org> # 5.14+ Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull OPP (operating performance points) updates for 5.17-rc1 from Viresh Kumar: "This updates the documentation to match the latest code." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: Documentation: power: Update outdated contents in opp.rst
2021-12-30Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq updates for 5.17-rc1 from Viresh Kumar: "- Qcom cpufreq driver updates improve irq support (Ard Biesheuvel, Stephen Boyd, and Vladimir Zapolskiy). - Fixes double devm_remap for mediatek driver (Hector Yuan). - Introduces thermal pressure helpers (Lukasz Luba)." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: mediatek-hw: Fix double devm_remap in hotplug case cpufreq: qcom-hw: Use optional irq API cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts cpufreq: qcom-hw: Fix probable nested interrupt handling cpufreq: qcom-cpufreq-hw: Avoid stack buffer for IRQ name arch_topology: Remove unused topology_set_thermal_pressure() and related cpufreq: qcom-cpufreq-hw: Use new thermal pressure update function cpufreq: qcom-cpufreq-hw: Update offline CPUs per-cpu thermal pressure thermal: cpufreq_cooling: Use new thermal pressure update function arch_topology: Introduce thermal pressure update function
2021-12-30drm/amdgpu: no DC support for headless chipsAlex Deucher
Chips with no display hardware should return false for DC support. v2: drop Arcturus and Aldebaran Fixes: f7f12b25823c0d ("drm/amdgpu: default to true in amdgpu_device_asic_has_dc_support") Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reported-by: Tareque Md.Hanif <tarequemd.hanif@yahoo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: fix dereference before NULL checkJosé Expósito
The "plane_state" pointer was access before checking if it was NULL. Avoid a possible NULL pointer dereference by accessing the plane address after the check. Addresses-Coverity-ID: 1493892 ("Dereference before null check") Fixes: 3f68c01be9a22 ("drm/amd/display: add cyan_skillfish display support") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: always reset the asic in suspend (v2)Alex Deucher
If the platform suspend happens to fail and the power rail is not turned off, the GPU will be in an unknown state on resume, so reset the asic so that it will be in a known good state on resume even if the platform suspend failed. v2: handle s0ix Acked-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable ↵Evan Quan
platform By setting mp1_state as PP_MP1_STATE_UNLOAD, MP1 will do some proper cleanups and put itself into a state ready for PNP. That can workaround some random resuming failure observed on BOCO capable platforms. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Fix the uninitialized variable in enable_stream_features()Yizhuo Zhai
In function enable_stream_features(), the variable "old_downspread.raw" could be uninitialized if core_link_read_dpcd() fails, however, it is used in the later if statement, and further, core_link_write_dpcd() may write random value, which is potentially unsafe. Fixes: 6016cd9dba0f ("drm/amd/display: add helper for enabling mst stream features") Cc: stable@vger.kernel.org Signed-off-by: Yizhuo Zhai <yzhai003@ucr.edu> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: fix runpm documentationAlex Deucher
It's not only supported by HG/PX laptops. It's supported by all dGPUs which supports BOCO/BACO functionality (runtime D3). BOCO - Bus Off, Chip Off. The entire chip is powered off. This is controlled by ACPI. BACO - Bus Active, Chip Off. The chip still shows up on the PCI bus, but the device itself is powered down. v2: fix missed HG/PX reference Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30amdgpu/pm: Make sysfs pm attributes as read-only for VFsMarina Nikolic
== Description == Setting values of pm attributes through sysfs should not be allowed in SRIOV mode. These calls will not be processed by FW anyway, but error handling on sysfs level should be improved. == Changes == This patch prohibits performing of all set commands in SRIOV mode on sysfs level. It offers better error handling as calls that are not allowed will not be propagated further. == Test == Writing to any sysfs file in passthrough mode will succeed. Writing to any sysfs file in ONEVF mode will yield error: "calling process does not have sufficient permission to execute a command". Signed-off-by: Marina Nikolic <Marina.Nikolic@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: save error count in RAS poison handlerTao Zhou
Otherwise the RAS error count couldn't be queried from sysfs. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: drop redundant semicolonGuchun Chen
A minor typo. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: get and restore link res mapWenjing Liu
[why] When reboot the link res map should be persisted. So during boot up, driver will look at the map to determine which link should take priority to use certain link res. This is to ensure that link res remains unshuffled after a reboot. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: support dynamic HPO DP link encoder allocationWenjing Liu
[why] When there are more DP2.0 RXs connected than the number HPO DP link encoders we have, we need to dynamically allocate HPO DP link encoder to the port that needs it. [how] Only allocate HPO DP link encoder when it is needed. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: access hpo dp link encoder only through link resourceWenjing Liu
[why] Update all accesses to use hpo dp link encoder through link resource only. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: populate link res in both detection and validationWenjing Liu
[why] This commit is to populate link res in preparation of the next commit. The next commit will replace all existing code to use link res instead Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: define link res and make it accessible to all link interfacesWenjing Liu
[why] There will be a series of re-arch changes in Link Resource Management. They are more and more muxable link resource objects and the resource is insufficient for a one to one allocation to all links created. Therefore a link resource sharing logic is required to determine which link should use certain link resource. This commit is the first one in this series that starts by defining a link resource struct, this struct will be available to all interfaces that need to perform link programming sequence. In later commits, we will granduately decouple link resource objects out of dc link. So instead of access a link resource from dc link. Current link's resource can be accessible through pipe_ctx->link_res during commit, or by calling dc_link_get_cur_link_res function with current link passed in after commit. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: 3.2.167Aric Cyr
This version brings along the following: - Fixes and improvements in the LTTPR code - Improve z-state - Fix null pointer check - Improve communication with s0i2 - Update multiple-display split policy - Add missing registers Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: [FW Promotion] Release 0.0.98Anthony Koo
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Undo ODM combineMartin Leung
Undo ODM Combine regression causing causing pipe allocation issues. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Add reg defs for DCN303Wesley Chalmers
[WHY] These registers are currently missing from the DCN303 header files Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Changed pipe split policy to allow for multi-display pipe splitAngus Wang
[WHY] Current implementation of pipe split policy prevents pipe split with multiple displays connected, which caused the MCLK speed to be stuck at max [HOW] Changed the pipe split policies so that pipe split is allowed for multi-display configurations Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1522 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1709 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1655 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Angus Wang <angus.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Set optimize_pwr_state for DCN31Nicholas Kazlauskas
[Why] We'll exit optimized power state to do link detection but we won't enter back into the optimized power state. This could potentially block s2idle entry depending on the sequencing, but it also means we're losing some power during the transition period. [How] Hook up the handler like DCN21. It was also missed like the exit_optimized_pwr_state callback. Fixes: 64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ") Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Remove CR AUX RD Interval limit for LTTPRGeorge Shen
[Why] DP spec specifies that DPRX shall use the read interval in the TRAINING_AUX_RD_INTERVAL_PHY_REPEATER LTTPR DPCD register. This register's bit definition is the same as the AUX read interval register for DPRX. [How} Remove logic which forces AUX read interval to 100us for repeaters when in LTTPR non-transparent mode. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: George Shen <George.Shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Send s0i2_rdy in stream_count == 0 optimizationNicholas Kazlauskas
[Why] Otherwise SMU won't mark Display as idle when trying to perform s2idle. [How] Mark the bit in the dcn31 codepath, doesn't apply to older ASIC. It needed to be split from phy refclk off to prevent entering s2idle when PSR was engaged but driver was not ready. Fixes: 118a33151658 ("drm/amd/display: Add DCN3.1 clock manager support") Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Fix check for null function ptrAlvin Lee
[Why] Bug fix for null function ptr (should check for NULL instead of not NULL) [How] Fix if condition Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Added power down for DCN10Lai, Derek
[Why] The change of setting a timer callback on boot for 10 seconds is still working, just lacked power down for DCN10. [How] Added power down for DCN10. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Derek Lai <Derek.Lai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Block z-states when stutter period exceeds criteriaNicholas Kazlauskas
[Why] Stutter period won't be less than 5000.0, but if PSR is enabled then we can potentially enter Z9 when MPO is enabled. SMU will try to enter Z9 too early in these cases (before PSR is enabled) and we'll see underflow. [How] Block z-states (z9, z10) until we can add a new interface to SMU to signal when we can support z10 but not z9. We can revert this once the interface change is in. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Refactor vendor specific link training sequenceShen, George
[Why] Current implementation is not scalable and retrofits the existing standard link training code for purposes outside of its original design. [How] Refactor vendor specific link training sequence into its own separate function to be called instead of the standard link training function. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: George Shen <George.Shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Limit max link cap with LTTPR capsGeorge Shen
[Why] Max link rate should be limited to the maximum link rate support by any LTTPR that are connected, including when operating in transparent mode. [How] Include transparent mode when factoring in LTTPR max supported link rate. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: George Shen <George.Shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: fix B0 TMDS deepcolor no dislay issueCharlene Liu
[why] B0 PHY C map to F, D map to G driver use logic instance, dmub does the remap. Driver still need use the right PHY instance to access right HW. [how] use phyical instance when program PHY register. [note] could move resync_control programming to dmub next. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: Check the memory can be accesssed by ttm_device_clear_dma_mappings.Surbhi Kakarya
If the event guard is enabled and VF doesn't receive an ack from PF for full access, the guest driver load crashes. This is caused due to the call to ttm_device_clear_dma_mappings with non-initialized mman during driver tear down. This patch adds the necessary condition to check if the mman initialization passed or not and takes the path based on the condition output. Signed-off-by: Surbhi Kakarya <Surbhi.Kakarya@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdkfd: correct sdma queue number in kfd device init (v3)Guchun Chen
This patch keeps the setting of sdma queue number to the same after recent KFD code refactor. Additionally, improve code to use switch case to list IP version to complete kfd device_info structure filling for IH version assignment. This makes consistency with the IP parse code in amdgpu_discovery.c. v2: use dev_warn for the default switch case; set default sdma queue per engine(8) and IH handler to v9. (Jonathan) v3: Fix missed IP version check of Raven. Fixes: f0dc99a6f742bc ("drm/amdkfd: add kfd_device_info_init function") Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Graham Sider <Graham.Sider@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: Access the FRU on AldebaranKent Russell
This is supported, although the offset is different from VG20, so fix that with a variable and enable getting the product name and serial number from the FRU. Do this for all SKUs since all SKUs have the FRU Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: Only overwrite serial if field is emptyKent Russell
On Aldebaran, the serial may be obtained from the FRU. Only overwrite the serial with the unique_id if the serial is empty. This will support printing serial numbers for mGPU devices where there are 2 unique_ids for the 2 GPUs, but only one serial number for the board Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: Enable unique_id for AldebaranKent Russell
It's supported, so support the unique_id sysfs file Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: Increase potential product_name to 64 charactersKent Russell
Having seen at least 1 42-character product_name, bump the number up to 64, and put that definition into amdgpu.h to make future adjustments simpler. Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: Remove the redundant code of psp bootloader functionsyipechai
The psp bootloader functions code of psp_v13_0.c had been optimized before. According the code style of psp_v13_0.c to remove the redundant code of psp_v11_0.c. v2: squash in drop unused variable (Alex) Signed-off-by: yipechai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: Call amdgpu_device_unmap_mmio() if device is unplugged to ↵Leslie Shi
prevent crash in GPU initialization failure [Why] In amdgpu_driver_load_kms, when amdgpu_device_init returns error during driver modprobe, it will start the error handle path immediately and call into amdgpu_device_unmap_mmio as well to release mapped VRAM. However, in the following release callback, driver stills visits the unmapped memory like vcn.inst[i].fw_shared_cpu_addr in vcn_v3_0_sw_fini. So a kernel crash occurs. [How] call amdgpu_device_unmap_mmio() if device is unplugged to prevent invalid memory address in vcn_v3_0_sw_fini() when GPU initialization failure. Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30fsl/fman: Fix missing put_device() call in fman_port_probeMiaoqian Lin
The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the and error handling paths. Fixes: 18a6c85fcc78 ("fsl/fman: Add FMan Port Support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-30net/smc: Use the bitmap API when applicableChristophe JAILLET
Using the bitmap API is less verbose than hand writing them. It also improves the semantic. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 20:27:17 +0000