| Age | Commit message (Collapse) | Author |
|---|
|
Jaegeuk and Brad report a NULL pointer crash when writeback ending tries
to update the memcg stats:
BUG: unable to handle kernel NULL pointer dereference at 00000000000003b0
IP: test_clear_page_writeback+0x12e/0x2c0
[...]
RIP: 0010:test_clear_page_writeback+0x12e/0x2c0
Call Trace:
<IRQ>
end_page_writeback+0x47/0x70
f2fs_write_end_io+0x76/0x180 [f2fs]
bio_endio+0x9f/0x120
blk_update_request+0xa8/0x2f0
scsi_end_request+0x39/0x1d0
scsi_io_completion+0x211/0x690
scsi_finish_command+0xd9/0x120
scsi_softirq_done+0x127/0x150
__blk_mq_complete_request_remote+0x13/0x20
flush_smp_call_function_queue+0x56/0x110
generic_smp_call_function_single_interrupt+0x13/0x30
smp_call_function_single_interrupt+0x27/0x40
call_function_single_interrupt+0x89/0x90
RIP: 0010:native_safe_halt+0x6/0x10
(gdb) l *(test_clear_page_writeback+0x12e)
0xffffffff811bae3e is in test_clear_page_writeback (./include/linux/memcontrol.h:619).
614 mod_node_page_state(page_pgdat(page), idx, val);
615 if (mem_cgroup_disabled() || !page->mem_cgroup)
616 return;
617 mod_memcg_state(page->mem_cgroup, idx, val);
618 pn = page->mem_cgroup->nodeinfo[page_to_nid(page)];
619 this_cpu_add(pn->lruvec_stat->count[idx], val);
620 }
621
622 unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order,
623 gfp_t gfp_mask,
The issue is that writeback doesn't hold a page reference and the page
might get freed after PG_writeback is cleared (and the mapping is
unlocked) in test_clear_page_writeback(). The stat functions looking up
the page's node or zone are safe, as those attributes are static across
allocation and free cycles. But page->mem_cgroup is not, and it will
get cleared if we race with truncation or migration.
It appears this race window has been around for a while, but less likely
to trigger when the memcg stats were updated first thing after
PG_writeback is cleared. Recent changes reshuffled this code to update
the global node stats before the memcg ones, though, stretching the race
window out to an extent where people can reproduce the problem.
Update test_clear_page_writeback() to look up and pin page->mem_cgroup
before clearing PG_writeback, then not use that pointer afterward. It
is a partial revert of 62cccb8c8e7a ("mm: simplify lock_page_memcg()")
but leaves the pageref-holding callsites that aren't affected alone.
Link: http://lkml.kernel.org/r/20170809183825.GA26387@cmpxchg.org
Fixes: 62cccb8c8e7a ("mm: simplify lock_page_memcg()")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Jaegeuk Kim <jaegeuk@kernel.org>
Tested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reported-by: Bradley Bolen <bradleybolen@gmail.com>
Tested-by: Brad Bolen <bradleybolen@gmail.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: <stable@vger.kernel.org> [4.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull xfs fixes from Darrick Wong:
"A handful more bug fixes for you today.
Changes since last time:
- Don't leak resources when mount fails
- Don't accidentally clobber variables when looking for free inodes"
* tag 'xfs-4.13-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't leak quotacheck dquots when cow recovery
xfs: clear MS_ACTIVE after finishing log recovery
iomap: fix integer truncation issues in the zeroing and dirtying helpers
xfs: fix inobt inode allocation search optimization
|
|
Pull block fixes from Jens Axboe:
"A small set of fixes that should go into this release. This contains:
- An NVMe pull request from Christoph, with a few select fixes.
One of them fix a polling regression in this series, in which it's
trivial to cause the kernel to disable most of the hardware queue
interrupts.
- Fixup for a blk-mq queue usage imbalance on request allocation,
from Keith.
- A xen block pull request from Konrad, fixing two issues with
xen/xen-blkfront"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq-pci: add a fallback when pci_irq_get_affinity returns NULL
nvme-pci: set cqe_seen on polled completions
nvme-fabrics: fix reporting of unrecognized options
nvmet-fc: eliminate incorrect static markers on local variables
nvmet-fc: correct use after free on list teardown
nvmet: don't overwrite identify sn/fr with 0-bytes
xen-blkfront: use a right index when checking requests
xen: fix bio vec merging
blk-mq: Fix queue usage on failed request allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Fourth set of -rc fixes for 4.13 cycle. This is all of the -rc fixes
that we know of. I suspect this will be the last rc pull request, but
you never know, I could be wrong.
Nothing major here. There are the i40iw patches I mentioned in my last
pull request minus one that I pulled out because it wasn't a fix and
not appropriate for the rc cycle. Then a few other items trickled in
and were added to the pull request. It's fairly small aside from those
five i40iw patches
- Set of five i40iw fixes (the first of these is rather large by line
count consideration, but I decided to send it because if fixes a
legitimate issue and the line count is because it does so by
creating a new function and using it where needed instead of just
patching up a few lines...a smaller fix could probably be done, but
the larger fix is the better code solution)
- One vmw_pvrdma fix
- One hns_roce fix (this silences a checker warning, but can't
actually happen, I expect a patch to remove this from all drivers
that share this same check in for-next)
- One iw_cxgb4 fix
- Two IB core fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/uverbs: Fix NULL pointer dereference during device removal
IB/core: Protect sysfs entry on ib_unregister_device
iw_cxgb4: fix misuse of integer variable
IB/hns: fix memory leak on ah on error return path
i40iw: Fix potential fcn_id_array out of bounds
i40iw: Use correct alignment for CQ0 memory
i40iw: Fix typecast of tcp_seq_num
i40iw: Correct variable names
i40iw: Fix parsing of query/commit FPM buffers
RDMA/vmw_pvrdma: Report CQ missed events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A bug in the VSX register saving that could cause userspace FP/VMX
register corruption.
Never seen to happen (that we know of), was found by code inspection,
but still tagged for stable given the consequences"
* tag 'powerpc-4.13-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix VSX enabling/flushing to also test MSR_FP and MSR_VEC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A small number of bugfixes, nothing serious this time. Here is a full
list.
4.13 regression fix:
- imx7d-sdb pinctrl support regressed in 4.13 due to an incomplete
patch
DT fixes for recently added devices:
- badly copied DT entries on imx6qdl-nitrogen6_som broke PCI reset
- sama5d2 memory controller had the wrong ID and registers
- imx7 power domains did not work correctly with deferred probing
(driver added in 4.12)
- Allwinner H5 pinctrl (added in 4.12) did not work right with GPIO
interrupts
Fixes for older bugs that just got noticed:
- i.MX25 ADC support (added in 4.6) apparently never worked right due
to a missing 'ranges' property in DT.
- Renesas Salvador Audio support (added in v4.5) was broken for
device repeated bind/unbind due to a naming conflict.
- Various allwinner boards are missing an 'ethernet' alias in DT,
leading to unstable device naming.
Preventive bugfix:
- TI Keystone needs a fix to prevent a NULL pointer dereference with
an upcoming PM change"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
soc: ti: ti_sci_pm_domains: Populate name for genpd
ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset
arm64: allwinner: h5: fix pinctrl IRQs
arm64: allwinner: a64: sopine: add missing ethernet0 alias
arm64: allwinner: a64: pine64: add missing ethernet0 alias
arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias
arm64: renesas: salvator-common: avoid audio_clkout naming conflict
ARM: dts: i.MX25: add ranges to tscadc
soc: imx: gpcv2: fix regulator deferred probe
ARM: dts: at91: sama5d2: fix EBI/NAND controllers declaration
ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC
ARM: dts: imx7d-sdb: Put pinctrl_spi4 in the correct location
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes, mostly for regression fixes (sequencer
kconfig and emu10k1 probe) and device-specific quirks (three for USB
and one for HD-audio).
One significant change is a fix for races in ALSA sequencer core,
which covers over the previous incomplete fix"
* tag 'sound-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: emu10k1: Fix forgotten user-copy conversion in init code
ALSA: usb-audio: add DSD support for new Amanero PID
ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devices
ALSA: usb-audio: Apply sample rate quirk to Sennheiser headset
ALSA: seq: 2nd attempt at fixing race creating a queue
ALSA: hda/realtek - Fix pincfg for Dell XPS 13 9370
ALSA: seq: Fix CONFIG_SND_SEQ_MIDI dependency
|
|
Pull dma-mapping fix from Christoph Hellwig:
"Another dma-mapping regression fix"
* tag 'dma-mapping-4.13-3' of git://git.infradead.org/users/hch/dma-mapping:
of: fix DMA mask generation
|
|
While pci_irq_get_affinity should never fail for SMP kernel that
implement the affinity mapping, it will always return NULL in the
UP case, so provide a fallback mapping of all queues to CPU 0 in
that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe changes from Christoph:
"The fixes are getting really small now - two for FC, one for PCI, one
for the fabrics layer and one for the target."
|
|
The hardlockup detector on x86 uses a performance counter based on unhalted
CPU cycles and a periodic hrtimer. The hrtimer period is about 2/5 of the
performance counter period, so the hrtimer should fire 2-3 times before the
performance counter NMI fires. The NMI code checks whether the hrtimer
fired since the last invocation. If not, it assumess a hard lockup.
The calculation of those periods is based on the nominal CPU
frequency. Turbo modes increase the CPU clock frequency and therefore
shorten the period of the perf/NMI watchdog. With extreme Turbo-modes (3x
nominal frequency) the perf/NMI period is shorter than the hrtimer period
which leads to false positives.
A simple fix would be to shorten the hrtimer period, but that comes with
the side effect of more frequent hrtimer and softlockup thread wakeups,
which is not desired.
Implement a low pass filter, which checks the perf/NMI period against
kernel time. If the perf/NMI fires before 4/5 of the watchdog period has
elapsed then the event is ignored and postponed to the next perf/NMI.
That solves the problem and avoids the overhead of shorter hrtimer periods
and more frequent softlockup thread wakeups.
Fixes: 58687acba592 ("lockup_detector: Combine nmi_watchdog and softlockup detector")
Reported-and-tested-by: Kan Liang <Kan.liang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dzickus@redhat.com
Cc: prarit@redhat.com
Cc: ak@linux.intel.com
Cc: babu.moger@oracle.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: acme@redhat.com
Cc: stable@vger.kernel.org
Cc: atomlin@redhat.com
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1708150931310.1886@nanos
|
|
irq_modify_status starts by clearing the trigger settings from
irq_data before applying the new settings, but doesn't restore them,
leaving them to IRQ_TYPE_NONE.
That's pretty confusing to the potential request_irq() that could
follow. Instead, snapshot the settings before clearing them, and restore
them if the irq_modify_status() invocation was not changing the trigger.
Fixes: 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ")
Reported-and-tested-by: jeffy <jeffy.chen@rock-chips.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818095345.12378-1-marc.zyngier@arm.com
|
|
Commit b6a1d093f96b ("PM / Domains: Extend generic power domain
debugfs") now creates a debugfs directory for each genpd based on the
name of the genpd. Currently no name is given to the genpd created by
ti_sci_pm_domains driver so because of this we see a NULL pointer
dereferences when it is accessed on boot when the debugfs entry creation
is attempted.
Give the genpd a name before registering it to avoid this.
Fixes: 52835d59fc6c ("soc: ti: Add ti_sci_pm_domains driver")
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Pull "i.MX fixes for 4.13, round 3" from Shawn Guo:
- Fix PCIe reset GPIO of imx6qdl-nitrogen6_som2 board, which was
a bad copy from nitrogen6_max device tree.
* tag 'imx-fixes-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Pull "Allwinner fixes for 4.13, round 2" from Chen-Yu Tsai:
Three fixes adding a missing alias for the Ethernet controller on A64
boards. One adding a missing interrupt for the pin controller.
* tag 'sunxi-fixes-for-4.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: h5: fix pinctrl IRQs
arm64: allwinner: a64: sopine: add missing ethernet0 alias
arm64: allwinner: a64: pine64: add missing ethernet0 alias
arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias
|
|
attribute_groups are not supposed to change at runtime and none of the
groups is modified.
Mark the non-const structs as const.
[ tglx: Folded into one big patch ]
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: tony.luck@intel.com
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/1500550238-15655-2-git-send-email-arvind.yadav.cs@gmail.com
|
|
Jason's irqchip tree does not seem to have been updated for many months
now, remove it from the list of trees to avoid any possible confusion.
Jason says:
"Unfortunately, when I have time for irqchip, I don't always have the
time to properly follow up with pull-requests. So, for the time being,
I'll stick to reviewing as I can."
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: marc.zyngier@arm.com
Link: http://lkml.kernel.org/r/20170727224733.8288-1-f.fainelli@gmail.com
|
|
The commit d42fe63d5839 ("ALSA: emu10k1: Get rid of set_fs() usage")
converted the user-space copy hack with set_fs() to the direct
memcpy(), but one place was forgotten. This resulted in the error
from snd_emu10k1_init_efx(), eventually failed to load the driver.
Fix the missing piece.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196687
Fixes: d42fe63d5839 ("ALSA: emu10k1: Get rid of set_fs() usage")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add DSD support for new Amanero Combo384 firmware version with a new
PID. This firmware uses DSD_U32_BE.
Fixes: 3eff682d765b ("ALSA: usb-audio: Support both DSD LE/BE Amanero firmware versions")
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fixes: 920d13a884 ("nvme-pci: factor out the cqe reading mechanics from __nvme_process_cq")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Previous value was a bad copy of nitrogen6_max device tree.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Fixes: 3faa1bb2e89c ("ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Seems to be slowing down nicely, just one amdgpu fix, and a bunch of
i915 fixes"
* tag 'drm-fixes-for-v4.13-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/amdgpu: save list length when fence is signaled
drm/i915: Avoid the gpu reset vs. modeset deadlock
drm/i915: Suppress switch_mm emission between the same aliasing_ppgtt
drm/i915: Return correct EDP voltage swing table for 0.85V
drm/i915/cnl: Add slice and subslice information to debugfs.
drm/i915: Perform an invalidate prior to executing golden renderstate
drm/i915: remove unused function declaration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues related to exposing the current CPU frequency to
user space on x86.
Specifics:
- Disable interrupts around reading IA32_APERF and IA32_MPERF in
aperfmperf_snapshot_khz() (introduced recently) to avoid excessive
delays between the reads that may result from interrupt handling
(Doug Smythies).
- Fix the computation of the CPU frequency to be reported through the
pstate_sample tracepoint in intel_pstate (Doug Smythies)"
* tag 'pm-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: x86: Disable interrupts during MSRs reading
cpufreq: intel_pstate: report correct CPU frequencies during trace
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - Add antoher Lenovo ACPI ID for upcoming Lenovo NB
Input: elan_i2c - add ELAN0608 to the ACPI table
Input: trackpoint - assume 3 buttons when buttons detection fails
|
|
into drm-fixes
single amdgpu fix.
* 'drm-fixes-4.13' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: save list length when fence is signaled
|
|
git://anongit.freedesktop.org/git/drm-intel into drm-fixes
drm/i915 fixes for v4.13-rc6
"Chris' "drm/i915: Perform an invalidate prior to executing golden renderstate" and Daniel's
"drm/i915: Avoid the gpu reset vs. modeset deadlock" seem like the most important ones.
* tag 'drm-intel-fixes-2017-08-16' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Avoid the gpu reset vs. modeset deadlock
drm/i915: Suppress switch_mm emission between the same aliasing_ppgtt
drm/i915: Return correct EDP voltage swing table for 0.85V
drm/i915/cnl: Add slice and subslice information to debugfs.
drm/i915: Perform an invalidate prior to executing golden renderstate
drm/i915: remove unused function declaration
|
|
If we fail a mount on account of cow recovery errors, it's possible that
a previous quotacheck left some dquots in memory. The bailout clause of
xfs_mountfs forgets to purge these, and so we leak them. Fix that.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Way back when we established inode block-map redo log items, it was
discovered that we needed to prevent the VFS from evicting inodes during
log recovery because any given inode might be have bmap redo items to
replay even if the inode has no link count and is ultimately deleted,
and any eviction of an unlinked inode causes the inode to be truncated
and freed too early.
To make this possible, we set MS_ACTIVE so that inodes would not be torn
down immediately upon release. Unfortunately, this also results in the
quota inodes not being released at all if a later part of the mount
process should fail, because we never reclaim the inodes. So, set
MS_ACTIVE right before we do the last part of log recovery and clear it
immediately after we finish the log recovery so that everything
will be torn down properly if we abort the mount.
Fixes: 17c12bcd30 ("xfs: when replaying bmap operations, don't let unlinked inodes get reaped")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
* intel_pstate-fix:
cpufreq: intel_pstate: report correct CPU frequencies during trace
* cpufreq-x86-fix:
cpufreq: x86: Disable interrupts during MSRs reading
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Fix PCI memory bar assignments with 64-bit kernels on machines with
Dino/Cujo PCI chipsets. This makes PCI graphic cards work on such
machines (from Thomas Bogendoerfer).
- Fix documentation to be more clear about the difference between %pF
and %pS printk format usage. There are still many places in the
kernel which have it wrong (from Petr Mladek, Sergey Senozhatsky &
me).
* 'parisc-4.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
printk-formats.txt: Better describe the difference between %pS and %pF
parisc: pci memory bar assignment fails with 64bit kernels on dino/cujo
|
|
Only print the specified options that are not recognized, instead
of the whole list of options.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota fix from Jan Kara:
"A fix of a check for quota limit"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: correct space limit check
|
|
Christian Brauner reported that if you use the TIOCGPTPEER ioctl() to
get a slave pty file descriptor, the resulting file descriptor doesn't
look right in /proc/<pid>/fd/<fd>. In particular, he wanted to use
readlink() on /proc/self/fd/<fd> to get the pathname of the slave pty
(basically implementing "ptsname{_r}()").
The reason for that was that we had generated the wrong 'struct path'
when we create the pty in ptmx_open().
In particular, the dentry was correct, but the vfsmount pointed to the
mount of the ptmx node. That _can_ be correct - in case you use
"/dev/pts/ptmx" to open the master - but usually is not. The normal
case is to use /dev/ptmx, which then looks up the pts/ directory, and
then the vfsmount of the ptmx node is obviously the /dev directory, not
the /dev/pts/ directory.
We actually did have the right vfsmount available, but in the wrong
place (it gets looked up in 'devpts_acquire()' when we get a reference
to the pts filesystem), and so ptmx_open() used the wrong mnt pointer.
The end result of this confusion was that the pty worked fine, but when
if you did TIOCGPTPEER to get the slave side of the pty, end end result
would also work, but have that dodgy 'struct path'.
And then when doing "d_path()" on to get the pathname, the vfsmount
would not match the root of the pts directory, and d_path() would return
an empty pathname thinking that the entry had escaped a bind mount into
another mount.
This fixes the problem by making devpts_acquire() return the vfsmount
for the pts filesystem, allowing ptmx_open() to trivially just use the
right mount for the pts dentry, and create the proper 'struct path'.
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
C-Media devices (at least some models) mute the playback stream when
volumes are set to the minimum value. But this isn't informed via TLV
and the user-space, typically PulseAudio, gets confused as if it's
still played in a low volume.
This patch adds the new flag, min_mute, to struct usb_mixer_elem_info
for indicating that the mixer element is with the minimum-mute volume.
This flag is set for known C-Media devices in
snd_usb_mixer_fu_apply_quirk() in turn.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196669
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Pull "Fourth Round of Renesas ARM Based SoC Fixes for v4.13" from Simon Horman:
* Avoid audio_clkout naming conflict for salvator boards using
Renesas R-Car Gen 3 SoCs
Morimoto-san says "The clock name of "audio_clkout" is used by the
Renesas sound driver. This duplicated naming breaks its clock
registering/unregistering. Especially when unbind/bind it can't handle
clkout correctly. This patch renames "audio_clkout" to "audio-clkout" to
avoid the naming conflict."
* tag 'renesas-fixes4-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: renesas: salvator-common: avoid audio_clkout naming conflict
|
|
Historically, DMA masks have suffered some ambiguity between whether
they represent the range of physical memory a device can access, or the
address bits a device is capable of driving, particularly since on many
platforms the two are equivalent. Whilst there are some stragglers left
(dma_max_pfn(), I'm looking at you...), the majority of DMA code has
been cleaned up to follow the latter definition, not least since it is
the only one which makes sense once IOMMUs are involved.
In this respect, of_dma_configure() has always done the wrong thing in
how it generates initial masks based on "dma-ranges". Although rounding
down did not affect the TI Keystone platform where dma_addr + size is
already a power of two, in any other case it results in a mask which is
at best unnecessarily constrained and at worst unusable.
BCM2837 illustrates the problem nicely, where we have a DMA base of 3GB
and a size of 1GB - 16MB, giving dma_addr + size = 0xff000000 and a
resultant mask of 0x7fffffff, which is then insufficient to even cover
the necessary offset, effectively making all DMA addresses out-of-range.
This has been hidden until now (mostly because we don't yet prevent
drivers from simply overwriting this initial mask later upon probe), but
due to recent changes elsewhere now shows up as USB being broken on
Raspberry Pi 3.
Make it right by rounding up instead of down, such that the mask
correctly correctly describes all possisble bits the device needs to
emit.
Fixes: 9a6d7298b083 ("of: Calculate device DMA masks based on DT dma-range size")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Andreas Färber <afaerber@suse.de>
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
__startup_64() is normally using fixup_pointer() to access globals in a
position-independent fashion. However 'next_early_pgt' was accessed
directly, which wasn't guaranteed to work.
Luckily GCC was generating a R_X86_64_PC32 PC-relative relocation for
'next_early_pgt', but Clang emitted a R_X86_64_32S, which led to
accessing invalid memory and rebooting the kernel.
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Davidson <md@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: c88d71508e36 ("x86/boot/64: Rewrite startup_64() in C")
Link: http://lkml.kernel.org/r/20170816190808.131748-1-glider@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There were 2 statics introduced that were bogus. Removed the static
designations.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A couple of minor fixes (st, ses) and some bigger driver fixes for
qla2xxx (crash triggered by fw dump) and ipr (lockdep problems with
mq)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ses: Fix wrong page error
scsi: ipr: Fix scsi-mq lockdep issue
scsi: st: fix blk_get_queue usage
scsi: qla2xxx: Fix system crash while triggering FW dump
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fixes from Paul Moore:
"Two small fixes to the audit code, both explained well in the
respective patch descriptions, but the quick summary is one
use-after-free fix, and one silly fanotify notification flag fix"
* tag 'audit-pr-20170816' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: Receive unmount event
audit: Fix use after free in audit_remove_watch_rule()
|
|
Sometimes people seems unclear when to use the %pS or %pF printk format.
For example, see commit 51d96dc2e2dc ("random: fix warning message on ia64
and parisc") which fixed such a wrong format string.
The documentation should be more clear about the difference.
Signed-off-by: Helge Deller <deller@gmx.de>
[pmladek@suse.com: Restructure the entire section]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The ADDR_NO_RANDOMIZE checks in stack_maxrandom_size() and
randomize_stack_top() are not required.
PF_RANDOMIZE is set by load_elf_binary() only if ADDR_NO_RANDOMIZE is not
set, no need to re-check after that.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20170815154011.GB1076@redhat.com
|
|
Documentation/admin-guide/kernel-parameters.txt says:
norandmaps Don't use address space randomization. Equivalent
to echo 0 > /proc/sys/kernel/randomize_va_space
but it doesn't work because arch_rnd() which is used to randomize
mm->mmap_base returns a random value unconditionally. And as Kirill
pointed out, ADDR_NO_RANDOMIZE is broken by the same reason.
Just shift the PF_RANDOMIZE check from arch_mmap_rnd() to arch_rnd().
Fixes: 1b028f784e8c ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20170815153952.GA1076@redhat.com
|
|
As part of ib_uverbs_remove_one which might be triggered upon
reset flow, we trigger IB_EVENT_DEVICE_FATAL event to userspace
application.
If device was removed after uverbs fd was opened but before
ib_uverbs_get_context was called, the event file will be accessed
before it was allocated, result in NULL pointer dereference:
[ 72.325873] BUG: unable to handle kernel NULL pointer dereference at (null)
...
[ 72.325984] IP: _raw_spin_lock_irqsave+0x22/0x40
[ 72.327123] Call Trace:
[ 72.327168] ib_uverbs_async_handler.isra.8+0x2e/0x160 [ib_uverbs]
[ 72.327216] ? synchronize_srcu_expedited+0x27/0x30
[ 72.327269] ib_uverbs_remove_one+0x120/0x2c0 [ib_uverbs]
[ 72.327330] ib_unregister_device+0xd0/0x180 [ib_core]
[ 72.327373] mlx5_ib_remove+0x74/0x140 [mlx5_ib]
[ 72.327422] mlx5_remove_device+0xfb/0x110 [mlx5_core]
[ 72.327466] mlx5_unregister_interface+0x3c/0xa0 [mlx5_core]
[ 72.327509] mlx5_ib_cleanup+0x10/0x962 [mlx5_ib]
[ 72.327546] SyS_delete_module+0x155/0x230
[ 72.328472] ? exit_to_usermode_loop+0x70/0xa6
[ 72.329370] do_syscall_64+0x54/0xc0
[ 72.330262] entry_SYSCALL64_slow_path+0x25/0x25
Fix it by checking that user context was allocated before
trigger the event.
Fixes: 036b10635739 ('IB/uverbs: Enable device removal when there are active user space applications')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus
Pull xen block changes from Konrad:
Two fixes, both of them spotted by Amazon:
1) Fix in Xen-blkfront caused by the re-write in 4.8 time-frame.
2) Fix in the xen_biovec_phys_mergeable which allowed guest
requests when using NVMe - to slurp up more data than allowed
leading to an XSA (which has been made public today).
|
|
ib_unregister_device is not protecting removal of sysfs entries.
A call to ib_register_device in that window can result in
duplicate sysfs entry warning. Move mutex_unlock to after
ib_device_unregister_sysfs to protect against sysfs entry creation.
This issue is exposed during driver load/unload stress test.
WARNING: CPU: 5 PID: 4445 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5f/0x70
sysfs: cannot create duplicate filename '/class/infiniband/i40iw0'
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H
BIOS F7 01/17/2014
Workqueue: i40e i40e_service_task [i40e]
Call Trace:
dump_stack+0x67/0x98
__warn+0xcc/0xf0
warn_slowpath_fmt+0x4a/0x50
? kernfs_path_from_node+0x4b/0x60
sysfs_warn_dup+0x5f/0x70
sysfs_do_create_link_sd.isra.2+0xb7/0xc0
sysfs_create_link+0x20/0x40
device_add+0x28c/0x600
ib_device_register_sysfs+0x58/0x170 [ib_core]
ib_register_device+0x325/0x570 [ib_core]
? i40iw_register_rdma_device+0x1f4/0x400 [i40iw]
? kmem_cache_alloc_trace+0x143/0x330
? __raw_spin_lock_init+0x2d/0x50
i40iw_register_rdma_device+0x2dc/0x400 [i40iw]
i40iw_open+0x10a6/0x1950 [i40iw]
? i40iw_open+0xeab/0x1950 [i40iw]
? i40iw_make_cm_node+0x9c0/0x9c0 [i40iw]
i40e_client_subtask+0xa4/0x110 [i40e]
i40e_service_task+0xc2d/0x1320 [i40e]
process_one_work+0x203/0x710
? process_one_work+0x16f/0x710
worker_thread+0x126/0x4a0
? trace_hardirqs_on+0xd/0x10
kthread+0x112/0x150
? process_one_work+0x710/0x710
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x2e/0x40
---[ end trace fd11b69e21ea7653 ]---
Couldn't register device i40iw0 with driver model
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Fixes: ee30f7d507c0 ("iw_cxgb4: Max fastreg depth depends on DSGL support")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When dmac is NULL, ah is not being freed on the error return path. Fix
this by kfree'ing it.
Detected by CoverityScan, CID#1452636 ("Resource Leak")
Fixes: d8966fcd4c25 ("IB/core: Use rdma_ah_attr accessor functions")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Avoid out of bounds error by utilizing I40IW_MAX_STATS_COUNT
instead of I40IW_INVALID_FCN_ID.
Signed-off-by: Christopher N Bednarz <christoper.n.bednarz@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Utilize correct alignment variable when allocating
DMA memory for CQ0.
Signed-off-by: Christopher N Bednarz <christopher.n.bednarz@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
