summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-20RDMA/cma: fix null-ptr-deref Read in cma_cleanupzhengbin
In cma_init, if cma_configfs_init fails, need to free the previously memory and return fail, otherwise will trigger null-ptr-deref Read in cma_cleanup. cma_cleanup cma_configfs_exit configfs_unregister_subsystem Fixes: 045959db65c6 ("IB/cma: Add configfs for rdma_cm") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Link: https://lore.kernel.org/r/1566188859-103051-1-git-send-email-zhengbin13@huawei.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/mlx5: Block MR WR if UMR is not possibleMoni Shoua
Check conditions that are mandatory to post_send UMR WQEs. 1. Modifying page size. 2. Modifying remote atomic permissions if atomic access is required. If either condition is not fulfilled then fail to post_send() flow. Fixes: c8d75a980fab ("IB/mlx5: Respect new UMR capabilities") Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-9-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/mlx5: Fix MR re-registration flow to use UMR properlyMoni Shoua
The UMR WQE in the MR re-registration flow requires that modify_atomic and modify_entity_size capabilities are enabled. Therefore, check that the these capabilities are present before going to umr flow and go through slow path if not. Fixes: c8d75a980fab ("IB/mlx5: Respect new UMR capabilities") Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-8-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/mlx5: Report and handle ODP support properlyMoni Shoua
ODP depends on the several device capabilities, among them is the ability to send UMR WQEs with that modify atomic and entity size of the MR. Therefore, only if all conditions to send such a UMR WQE are met then driver can report that ODP is supported. Use this check of conditions in all places where driver needs to know about ODP support. Also, implicit ODP support depends on ability of driver to send UMR WQEs for an indirect mkey. Therefore, verify that all conditions to do so are met when reporting support. Fixes: c8d75a980fab ("IB/mlx5: Respect new UMR capabilities") Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-7-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/mlx5: Consolidate use_umr checks into single functionMoni Shoua
Introduce helper function to unify various use_umr checks. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-6-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20RDMA/restrack: Rewrite PID namespace check to be reliableLeon Romanovsky
task_active_pid_ns() is wrong API to check PID namespace because it posses some restrictions and return PID namespace where the process was allocated. It created mismatches with current namespace, which can be different. Rewrite whole rdma_is_visible_in_pid_ns() logic to provide reliable results without any relation to allocated PID namespace. Fixes: 8be565e65fa9 ("RDMA/nldev: Factor out the PID namespace check") Fixes: 6a6c306a09b5 ("RDMA/restrack: Make is_visible_in_pid_ns() as an API") Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-4-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20RDMA/counters: Properly implement PID checksLeon Romanovsky
"Auto" configuration mode is called for visible in that PID namespace and it ensures that all counters and QPs are coexist in the same namespace and belong to same PID. Fixes: 99fa331dc862 ("RDMA/counter: Add "auto" configuration mode support") Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-3-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/core: Fix NULL pointer dereference when bind QP to counterIdo Kalir
If QP is not visible to the pid, then we try to decrease its reference count and return from the function before the QP pointer is initialized. This lead to NULL pointer dereference. Fix it by pass directly the res to the rdma_restract_put as arg instead of &qp->res. This fixes below call trace: [ 5845.110329] BUG: kernel NULL pointer dereference, address: 00000000000000dc [ 5845.120482] Oops: 0002 [#1] SMP PTI [ 5845.129119] RIP: 0010:rdma_restrack_put+0x5/0x30 [ib_core] [ 5845.169450] Call Trace: [ 5845.170544] rdma_counter_get_qp+0x5c/0x70 [ib_core] [ 5845.172074] rdma_counter_bind_qpn_alloc+0x6f/0x1a0 [ib_core] [ 5845.173731] nldev_stat_set_doit+0x314/0x330 [ib_core] [ 5845.175279] rdma_nl_rcv_msg+0xeb/0x1d0 [ib_core] [ 5845.176772] ? __kmalloc_node_track_caller+0x20b/0x2b0 [ 5845.178321] rdma_nl_rcv+0xcb/0x120 [ib_core] [ 5845.179753] netlink_unicast+0x179/0x220 [ 5845.181066] netlink_sendmsg+0x2d8/0x3d0 [ 5845.182338] sock_sendmsg+0x30/0x40 [ 5845.183544] __sys_sendto+0xdc/0x160 [ 5845.184832] ? syscall_trace_enter+0x1f8/0x2e0 [ 5845.186209] ? __audit_syscall_exit+0x1d9/0x280 [ 5845.187584] __x64_sys_sendto+0x24/0x30 [ 5845.188867] do_syscall_64+0x48/0x120 [ 5845.190097] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1bd8e0a9d0fd1 ("RDMA/counter: Allow manual mode configuration support") Signed-off-by: Ido Kalir <idok@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-2-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/hfi1: Drop stale TID RDMA packets that cause TIDErrKaike Wan
In a congested fabric with adaptive routing enabled, traces show that packets could be delivered out of order. A stale TID RDMA data packet could lead to TidErr if the TID entries have been released by duplicate data packets generated from retries, and subsequently erroneously force the qp into error state in the current implementation. Since the payload has already been dropped by hardware, the packet can be simply dropped and it is no longer necessary to put the qp into error state. Fixes: 9905bf06e890 ("IB/hfi1: Add functions to receive TID RDMA READ response") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20190815192058.105923.72324.stgit@awfm-01.aw.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/hfi1: Add additional checks when handling TID RDMA WRITE DATA packetKaike Wan
In a congested fabric with adaptive routing enabled, traces show that packets could be delivered out of order, which could cause incorrect processing of stale packets. For stale TID RDMA WRITE DATA packets that cause KDETH EFLAGS errors, this patch adds additional checks before processing the packets. Fixes: d72fe7d5008b ("IB/hfi1: Add a function to receive TID RDMA WRITE DATA packet") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20190815192051.105923.69979.stgit@awfm-01.aw.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/hfi1: Add additional checks when handling TID RDMA READ RESP packetKaike Wan
In a congested fabric with adaptive routing enabled, traces show that packets could be delivered out of order, which could cause incorrect processing of stale packets. For stale TID RDMA READ RESP packets that cause KDETH EFLAGS errors, this patch adds additional checks before processing the packets. Fixes: 9905bf06e890 ("IB/hfi1: Add functions to receive TID RDMA READ response") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20190815192045.105923.59813.stgit@awfm-01.aw.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/hfi1: Unsafe PSN checking for TID RDMA READ Resp packetKaike Wan
When processing a TID RDMA READ RESP packet that causes KDETH EFLAGS errors, the packet's IB PSN is checked against qp->s_last_psn and qp->s_psn without the protection of qp->s_lock, which is not safe. This patch fixes the issue by acquiring qp->s_lock first. Fixes: 9905bf06e890 ("IB/hfi1: Add functions to receive TID RDMA READ response") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20190815192039.105923.7852.stgit@awfm-01.aw.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/hfi1: Drop stale TID RDMA packetsKaike Wan
In a congested fabric with adaptive routing enabled, traces show that the sender could receive stale TID RDMA NAK packets that contain newer KDETH PSNs and older Verbs PSNs. If not dropped, these packets could cause the incorrect rewinding of the software flows and the incorrect completion of TID RDMA WRITE requests, and eventually leading to memory corruption and kernel crash. The current code drops stale TID RDMA ACK/NAK packets solely based on KDETH PSNs, which may lead to erroneous processing. This patch fixes the issue by also checking the Verbs PSN. Addition checks are added before rewinding the TID RDMA WRITE DATA packets. Fixes: 9e93e967f7b4 ("IB/hfi1: Add a function to receive TID RDMA ACK packet") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20190815192033.105923.44192.stgit@awfm-01.aw.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20RDMA/siw: Fix potential NULL de-refBernard Metzler
In siw_connect() we have an error flow where there is no valid qp pointer. Make sure we don't try to de-ref in that situation. Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20190819140257.19319-1-bmt@zurich.ibm.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLBJason Gunthorpe
When ODP is enabled with IB_ACCESS_HUGETLB then the required pages should be calculated based on the extent of the MR, which is rounded to the nearest huge page alignment. Fixes: d2183c6f1958 ("RDMA/umem: Move page_shift from ib_umem to ib_odp_umem") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-5-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20io_uring: don't enter poll loop if we have CQEs pendingJens Axboe
We need to check if we have CQEs pending before starting a poll loop, as those could be the events we will be spinning for (and hence we'll find none). This can happen if a CQE triggers an error, or if it is found by eg an IRQ before we get a chance to find it through polling. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nvme: Add quirk for LiteON CL1 devices running FW 22301111Mario Limonciello
One of the components in LiteON CL1 device has limitations that can be encountered based upon boundary race conditions using the nvme bus specific suspend to idle flow. When this situation occurs the drive doesn't resume properly from suspend-to-idle. LiteON has confirmed this problem and fixed in the next firmware version. As this firmware is already in the field, avoid running nvme specific suspend to idle flow. Fixes: d916b1be94b6 ("nvme-pci: use host managed power state for suspend") Link: http://lists.infradead.org/pipermail/linux-nvme/2019-July/thread.html Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Charles Hyde <charles.hyde@dellteam.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nvme: Fix cntlid validation when not using NVMEoFGuilherme G. Piccoli
Commit 1b1031ca63b2 ("nvme: validate cntlid during controller initialisation") introduced a validation for controllers with duplicate cntlid that runs on nvme_init_subsystem(). The problem is that the validation relies on ctrl->cntlid, and this value is assigned (from id_ctrl value) after the call for nvme_init_subsystem() in nvme_init_identify() for non-fabrics scenario. That leads to ctrl->cntlid always being 0 in case we have a physical set of controllers in the same subsystem. This patch fixes that by loading the discovered cntlid id_ctrl value into ctrl->cntlid before the subsystem initialization, only for the non-fabrics case. The patch was tested with emulated nvme devices (qemu) having two controllers in a single subsystem. Without the patch, we couldn't make it work failing in the duplicate check; when running with the patch, we could see the subsystem holding both controllers. For the fabrics case we see ctrl->cntlid has a more intricate relation with the admin connect, so we didn't change that. Fixes: 1b1031ca63b2 ("nvme: validate cntlid during controller initialisation") Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nvme-multipath: fix possible I/O hang when paths are updatedAnton Eidelman
nvme_state_set_live() making a path available triggers requeue_work in order to resubmit requests that ended up on requeue_list when no paths were available. This requeue_work may race with concurrent nvme_ns_head_make_request() that do not observe the live path yet. Such concurrent requests may by made by either: - New IO submission. - Requeue_work triggered by nvme_failover_req() or another ana_work. A race may cause requeue_work capture the state of requeue_list before more requests get onto the list. These requests will stay on the list forever unless requeue_work is triggered again. In order to prevent such race, nvme_state_set_live() should synchronize_srcu(&head->srcu) before triggering the requeue_work and prevent nvme_ns_head_make_request referencing an old snapshot of the path list. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20io_uring: fix potential hang with polled IOJens Axboe
If a request issue ends up being punted to async context to avoid blocking, we can get into a situation where the original application enters the poll loop for that very request before it has been issued. This should not be an issue, except that the polling will hold the io_uring uring_ctx mutex for the duration of the poll. When the async worker has actually issued the request, it needs to acquire this mutex to add the request to the poll issued list. Since the application polling is already holding this mutex, the workqueue sleeps on the mutex forever, and the application thus never gets a chance to poll for the very request it was interested in. Fix this by ensuring that the polling drops the uring_ctx occasionally if it's not making any progress. Reported-by: Jeffrey M. Birnbaum <jmbnyc@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20Drivers: hv: vmbus: Fix virt_to_hvpfn() for X86_PAEDexuan Cui
In the case of X86_PAE, unsigned long is u32, but the physical address type should be u64. Due to the bug here, the netvsc driver can not load successfully, and sometimes the VM can panic due to memory corruption (the hypervisor writes data to the wrong location). Fixes: 6ba34171bcbd ("Drivers: hv: vmbus: Remove use of slow_virt_to_phys()") Cc: stable@vger.kernel.org Cc: Michael Kelley <mikelley@microsoft.com> Reported-and-tested-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-20Tools: hv: kvp: eliminate 'may be used uninitialized' warningVitaly Kuznetsov
When building hv_kvp_daemon GCC-8.3 complains: hv_kvp_daemon.c: In function ‘kvp_get_ip_info.constprop’: hv_kvp_daemon.c:812:30: warning: ‘ip_buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized] struct hv_kvp_ipaddr_value *ip_buffer; this seems to be a false positive: we only use ip_buffer when op == KVP_OP_GET_IP_INFO and it is only unset when op == KVP_OP_ENUMERATE. Silence the warning by initializing ip_buffer to NULL. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-20Input: hyperv-keyboard: Use in-place iterator API in the channel callbackDexuan Cui
Simplify the ring buffer handling with the in-place API. Also avoid the dynamic allocation and the memory leak in the channel callback function. Signed-off-by: Dexuan Cui <decui@microsoft.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-20Drivers: hv: vmbus: Remove the unused "tsc_page" from struct hv_contextDexuan Cui
This field is no longer used after the commit 63ed4e0c67df ("Drivers: hv: vmbus: Consolidate all Hyper-V specific clocksource code") , because it's replaced by the global variable "struct ms_hyperv_tsc_page *tsc_pg;" (now, the variable is in drivers/clocksource/hyperv_timer.c). Fixes: 63ed4e0c67df ("Drivers: hv: vmbus: Consolidate all Hyper-V specific clocksource code") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-20xdp: unpin xdp umem pages in error pathIvan Khoronzhuk
Fix mem leak caused by missed unpin routine for umem pages. Fixes: 8aef7340ae9695 ("xsk: introduce xdp_umem_page") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-20iwlwifi: pcie: fix recognition of QuZ devicesLuca Coelho
If the HW revision of Qu devices we found is QuZ, then we need to switch the configuration accordingly in order to use the correct FW. Add a block of ifs in order do that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-20iwlwifi: pcie: don't switch FW to qnj when ax201 is detectedLuca Coelho
We have a too generic condition that switches from Qu configurations to QnJ configurations. We need to exclude some configurations so that they are not erroneously switched. Add the ax201 configuration to the list of exclusions. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-20iwlwifi: pcie: fix the byte count table format for 22560 devicesEmmanuel Grumbach
Starting from 22560, the byte count is expected to be in bytes and we have now 14 bits. Ajust the code to this. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-20iwlwifi: mvm: Allow multicast data frames only when associatedIlan Peer
The MAC context configuration always allowed multicast data frames to pass to the driver for all MAC context types, and in the case of station MAC context both when associated and when not associated. One of the outcomes of this configuration is having the FW forward encrypted multicast frames to the driver with Rx status indicating that the frame was not decrypted (as expected, since no keys were configured yet) which in turn results with unnecessary error messages. Change this behavior to allow multicast data frames only when they are actually expected, e.g., station MAC context is associated etc. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-20rt2x00: clear IV's on start to fix AP mode regressionStanislaw Gruszka
To do not brake HW restart we should keep initialization vectors data. I assumed that on start the data is already initialized to zeros, but that not true on some scenarios and we should clear it. So add additional flag to check if we are under HW restart and clear IV's data if we are not. Patch fixes AP mode regression. Reported-and-tested-by: Emil Karlson <jekarl@iki.fi> Fixes: 710e6cc1595e ("rt2800: do not nullify initialization vector data") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-20mt76: mt76x0u: do not reset radio on resumeStanislaw Gruszka
On some machines mt76x0u firmware can hung during resume, what result on messages like below: [ 475.480062] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 475.990066] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 475.990075] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 476.500003] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 476.500012] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.010046] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.010055] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.529997] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.530006] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.824907] mt76x0 1-8:1.0: Error: send MCU cmd failed:-71 [ 477.824916] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.825029] usb 1-8: USB disconnect, device number 6 and possible whole system freeze. This can be avoided, if we do not perform mt76x0_chip_onoff() reset. Cc: stable@vger.kernel.org Fixes: 134b2d0d1fcf ("mt76x0: init files") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-20can: mcp251x: remove custom DMA mapped bufferMarc Kleine-Budde
There is no need to duplicate what SPI core already does, i.e. mapping buffers for DMA capable transfers. This patch removes all related pices of code. Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: mcp251x: Use DT-supplied interrupt flagsPhil Elwell
The MCP2515 datasheet clearly describes a level-triggered interrupt pin. Therefore the receiving interrupt controller must also be configured for level-triggered operation otherwise there is a danger of a missed interrupt condition blocking all subsequent interrupts. The ONESHOT flag ensures that the interrupt is masked until the threaded interrupt handler exits. Rather than change the flags globally (they must have worked for at least one user), keep the old behavior for for non DT devices. DT based devices specify the flags in their corresonding DT node. See: https://github.com/raspberrypi/linux/issues/2175 https://github.com/raspberrypi/linux/issues/2263 Signed-off-by: Phil Elwell <phil@raspberrypi.org> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: mcp251x: Use dev_name() during request_threaded_irq()Alexander Shiyan
Passing driver name as name during request_threaded_irq() results in all CAN IRQs have same name. This does not help much to easily identify which IRQ belongs to which CAN instance. Therefore pass dev_name() during request_threaded_irq() so that better identifiable name is listed for CAN devices in cat /proc/interrupts output. Output of cat /proc/interrupts Before this patch: 253: 2 gpio-mxc 13 Edge mcp251x 259: 2 gpio-mxc 19 Edge mcp251x After this patch: 253: 2 gpio-mxc 13 Edge spi1.1 259: 2 gpio-mxc 19 Edge spi1.2 Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: mcp251x: mcp251x_hw_reset(): allow more time after a resetMarc Kleine-Budde
Some boards take longer than 5ms to power up after a reset, so allow some retries attempts before giving up. Fixes: ff06d611a31c ("can: mcp251x: Improve mcp251x_hw_reset()") Cc: linux-stable <stable@vger.kernel.org> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: mcp251x: use u8 instead of uint8_tMarc Kleine-Budde
This patch changes all the uint8_t in the arguments in several function to u8. Acked-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: mcp251x: fix print formating stringsMarc Kleine-Budde
This patch fixes the print format strings in the driver. Acked-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: mcp251x: avoid long linesMarc Kleine-Budde
This patch fixes long lines in the driver. Acked-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: mcp251x: remove unnecessary blank linesMarc Kleine-Budde
This patch removes unnecessary blank lines, so that checkpatch doesn't complain anymore. Acked-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: mcp251x: convert block comments to network style commentsMarc Kleine-Budde
This patch converts all block comments to network subsystem style block comments. Acked-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: m_can_platform: m_can_plat_probe(): add missing error handling if ↵Marc Kleine-Budde
mcan_class is NULL This patch adds the missing error handling in m_can_plat_probe() if mcan_class is NULL. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: m_can_platform: remove not needed casts to struct m_can_plat_priv *Marc Kleine-Budde
The struct m_can_classdev::device_data is a void pointer, so there's no need to cast it to struct m_can_plat_priv *, when assigning the struct m_can_plat_priv pointer. This patch removes the not needed casts from the m_can_platform driver. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: tcan4x5x: fix data length in regmap write pathMarc Kleine-Budde
In regmap_spi_gather_write() the "addr" is prepared. The chip expects the number of 32 bit words to write in the lower 8 bits of addr. However the number of byte to write in shifted left by 3 (== divided by 8). The function tcan4x5x_regmap_write() is called with a data buffer, which holds the register information in the first 32 bits, followed by the actual data. tcan4x5x_regmap_write() calls regmap_spi_gather_write() with the val pointer pointing to the actual data (i.e. the original pointer is incremented by 4 bytes), but without decrementing the count. If the regmap framework only calls tcan4x5x_regmap_write() to read single 32 bit registers these two bugs cancel each other. This patch fixes the code. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: tcan4x5x: tcan4x5x_can_probe(): add missing error handling if ↵Marc Kleine-Budde
mcan_class is NULL This patch adds the missing error handling in tcan4x5x_can_probe() if mcan_class is NULL. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: tcan4x5x: remove not needed casts to struct tcan4x5x_priv *Marc Kleine-Budde
The struct m_can_classdev::device_data is a void pointer, so there's no need to cast it to struct tcan4x5x_priv *, when assigning the struct tcan4x5x_priv pointer. This patch removes the not needed casts from the tcan4x5x driver. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: tcan4x5x: remove unused struct tcan4x5x_priv::tcan4x5x_lockMarc Kleine-Budde
The mutex struct tcan4x5x_priv::tcan4x5x_lock is unused in the driver, so this patch removes the variable from the driver. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: hi311x: remove custom DMA mapped bufferMarc Kleine-Budde
There is no need to duplicate what SPI core already does, i.e. mapping buffers for DMA capable transfers. This patch removes all related pices of code. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: peak_pci: Make structure peak_pciec_i2c_bit_ops constantNishka Dasgupta
Static structure peak_pciec_i2c_bit_ops, of type i2c_algo_bit_data, is not used except to be copied into another variable. Hence make it const to protect it from modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20can: rcar_can: Remove unused platform data supportGeert Uytterhoeven
All R-Car platforms use DT for describing CAN controllers. R-Car CAN platform data support was never used in any upstream kernel. Move the Clock Select Register settings enum into the driver, and remove platform data support and the corresponding header file. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-20auxdisplay: ht16k33: Make ht16k33_fb_fix and ht16k33_fb_var constantNishka Dasgupta
The static structures ht16k33_fb_fix and ht16k33_fb_var, of types fb_fix_screeninfo and fb_var_screeninfo respectively, are not used except to be copied into other variables. Hence make both of them constant to prevent unintended modification. Issue found with Coccinelle. Acked-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-15 23:39:27 +0000