summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-04ASoC: da7219: Fix build error without CONFIG_I2CYueHaibing
Fix gcc build error while CONFIG_I2C is not set sound/soc/codecs/da7219.c:2640:1: warning: data definition has no type or storage class module_i2c_driver(da7219_i2c_driver); ^~~~~~~~~~~~~~~~~ sound/soc/codecs/da7219.c:2640:1: error: type defaults to int in declaration of module_i2c_driver [-Werror=implicit-int] sound/soc/codecs/da7219.c:2640:1: warning: parameter names (without types) in function declaration sound/soc/codecs/da7219.c:2629:26: warning: da7219_i2c_driver defined but not used [-Wunused-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 6d817c0e9fd7 ("ASoC: codecs: Add da7219 codec driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-04ASoC: SOF: Intel: hda: Fix COMPILE_TEST build errorYueHaibing
while building without PCI: sound/soc/sof/intel/hda.o: In function `hda_dsp_probe': hda.c:(.text+0x79c): undefined reference to `pci_ioremap_bar' hda.c:(.text+0x79c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `pci_ioremap_bar' hda.c:(.text+0x7c4): undefined reference to `pci_ioremap_bar' hda.c:(.text+0x7c4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `pci_ioremap_bar' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e13ef82a9ab8 ("ASoC: SOF: add COMPILE_TEST for PCI options") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-04drm/arm/hdlcd: Allow a bit of clock toleranceRobin Murphy
On the Arm Juno platform, the HDLCD pixel clock is constrained to 250KHz resolution in order to avoid the tiny System Control Processor spending aeons trying to calculate exact PLL coefficients. This means that modes like my oddball 1600x1200 with 130.89MHz clock get rejected since the rate cannot be matched exactly. In practice, though, this mode works quite happily with the clock at 131MHz, so let's relax the check to allow a little bit of slop. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-04drm/arm/hdlcd: Actually validate CRTC modesRobin Murphy
Rather than allowing any old mode through, then subsequently refusing unmatchable clock rates in atomic_check when it's too late to back out and pick a different mode, let's do that validation up-front where it will cause unsupported modes to be correctly pruned in the first place. This also eliminates an issue whereby a perceived clock rate of 0 would cause atomic disable to fail and prevent the module from being unloaded. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-04drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 timesWen He
This patch trying to fix monitor freeze issue caused by drm error 'flip_done timed out' on LS1028A platform. this set try is make a loop around the second setting CVAL and try like 5 times before giveing up. Signed-off-by: Wen He <wen.he_1@nxp.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-04drm/komeda: fixing of DMA mapping sg segment warningLowry Li (Arm Technology China)
Fixing the DMA mapping sg segment warning, which shows "DMA-API: mapping sg segment longer than device claims to support [len=921600] [max=65536]". Fixed by setting the max segment size at Komeda driver. This patch depends on: - https://patchwork.freedesktop.org/series/54448/ - https://patchwork.freedesktop.org/series/54449/ - https://patchwork.freedesktop.org/series/54450/ - https://patchwork.freedesktop.org/series/58976/ Changes since v1: - Adds member description - Adds patch denpendency in the comment Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Reviewed-by: Ayan Kumar Halder <ayan.halder@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-04arm64: dts: rockchip: add WiFi+BT support on ROCK Pi4 boardAkash Gajjar
Rock Pi 4 has a on board AP6256 WiFi/BT Module. enable wifi and bluetooth support on Rock Pi 4 board. Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-04arm64: dts: rockchip: fix isp iommu clocks and power domainHelen Koike
isp iommu requires wrapper variants of the clocks. noc variants are always on and using the wrapper variants will activate {A,H}CLK_ISP{0,1} due to the hierarchy. Tested using the pending isp patch set (which is not upstream yet). Without this patch, streaming from the isp stalls. Also add the respective power domain and remove the "disabled" status. Refer: RK3399 TRM v1.4 Fig. 2-4 RK3399 Clock Architecture Diagram RK3399 TRM v1.4 Fig. 8-1 RK3399 Power Domain Partition Signed-off-by: Helen Koike <helen.koike@collabora.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-04ARM: dts: rockchip: fix pwm-cells for rk3288's pwm3John Keeping
This is the same as the other PWMs on this SoC and uses 3 cells. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-04habanalabs: Read upper bits of trace buffer from RWPHITomer Tayar
The trace buffer address is 40 bits wide. The end of the buffer is set in the RWP register (lower 32 bits), and in the RWPHI register (upper 8 bits). Currently only the lower 32 bits are read, and this patch fixes it and concatenates the upper 8 bits to the output address. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-06-04drm: don't block fb changes for async plane updatesHelen Koike
In the case of a normal sync update, the preparation of framebuffers (be it calling drm_atomic_helper_prepare_planes() or doing setups with drm_framebuffer_get()) are performed in the new_state and the respective cleanups are performed in the old_state. In the case of async updates, the preparation is also done in the new_state but the cleanups are done in the new_state (because updates are performed in place, i.e. in the current state). The current code blocks async udpates when the fb is changed, turning async updates into sync updates, slowing down cursor updates and introducing regressions in igt tests with errors of type: "CRITICAL: completed 97 cursor updated in a period of 30 flips, we expect to complete approximately 15360 updates, with the threshold set at 7680" Fb changes in async updates were prevented to avoid the following scenario: - Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1 - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2 - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 (wrong) Where we have a single call to prepare fb2 but double cleanup call to fb2. To solve the above problems, instead of blocking async fb changes, we place the old framebuffer in the new_state object, so when the code performs cleanups in the new_state it will cleanup the old_fb and we will have the following scenario instead: - Async update, oldfb = NULL, newfb = fb1, prepare fb1, no cleanup - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb1 - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 Where calls to prepare/cleanup are balanced. Cc: <stable@vger.kernel.org> # v4.14+ Fixes: 25dc194b34dd ("drm: Block fb changes for async plane updates") Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-6-helen.koike@collabora.com
2019-06-04drm/vc4: fix fb references in async updateHelen Koike
Async update callbacks are expected to set the old_fb in the new_state so prepare/cleanup framebuffers are balanced. Calling drm_atomic_set_fb_for_plane() (which gets a reference of the new fb and put the old fb) is not required, as it's taken care by drm_mode_cursor_universal() when calling drm_atomic_helper_update_plane(). Cc: <stable@vger.kernel.org> # v4.19+ Fixes: 539c320bfa97 ("drm/vc4: update cursors asynchronously through atomic") Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-5-helen.koike@collabora.com
2019-06-04drm/msm: fix fb references in async updateHelen Koike
Async update callbacks are expected to set the old_fb in the new_state so prepare/cleanup framebuffers are balanced. Cc: <stable@vger.kernel.org> # v4.14+ Fixes: 224a4c970987 ("drm/msm: update cursors asynchronously through atomic") Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-4-helen.koike@collabora.com
2019-06-04drm/amd: fix fb references in async updateHelen Koike
Async update callbacks are expected to set the old_fb in the new_state so prepare/cleanup framebuffers are balanced. Calling drm_atomic_set_fb_for_plane() (which gets a reference of the new fb and put the old fb) is not required, as it's taken care by drm_mode_cursor_universal() when calling drm_atomic_helper_update_plane(). Cc: <stable@vger.kernel.org> # v4.20+ Fixes: 674e78acae0d ("drm/amd/display: Add fast path for cursor plane updates") Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-3-helen.koike@collabora.com
2019-06-04drm/rockchip: fix fb references in async updateHelen Koike
In the case of async update, modifications are done in place, i.e. in the current plane state, so the new_state is prepared and the new_state is cleaned up (instead of the old_state, unlike what happens in a normal sync update). To cleanup the old_fb properly, it needs to be placed in the new_state in the end of async_update, so cleanup call will unreference the old_fb correctly. Also, the previous code had a: plane_state = plane->funcs->atomic_duplicate_state(plane); ... swap(plane_state, plane->state); if (plane->state->fb && plane->state->fb != new_state->fb) { ... } Which was wrong, as the fb were just assigned to be equal, so this if statement nevers evaluates to true. Another details is that the function drm_crtc_vblank_get() can only be called when vop->is_enabled is true, otherwise it has no effect and trows a WARN_ON(). Calling drm_atomic_set_fb_for_plane() (which get a referent of the new fb and pus the old fb) is not required, as it is taken care by drm_mode_cursor_universal() when calling drm_atomic_helper_update_plane(). Fixes: 15609559a834 ("drm/rockchip: update cursors asynchronously through atomic.") Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-2-helen.koike@collabora.com
2019-06-03xen-blkfront: switch kcalloc to kvcalloc for large array allocationRoger Pau Monne
There's no reason to request physically contiguous memory for those allocations. [boris: added CC to stable] Cc: stable@vger.kernel.org Reported-by: Ian Jackson <ian.jackson@citrix.com> Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2019-06-04drm/mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable()Hsin-Yi Wang
mtk_dsi_stop() should be called after mtk_drm_crtc_atomic_disable(), which needs ovl irq for drm_crtc_wait_one_vblank(), since after mtk_dsi_stop() is called, ovl irq will be disabled. If drm_crtc_wait_one_vblank() is called after last irq, it will timeout with this message: "vblank wait timed out on crtc 0". This happens sometimes when turning off the screen. In drm_atomic_helper.c#disable_outputs(), the calling sequence when turning off the screen is: 1. mtk_dsi_encoder_disable() --> mtk_output_dsi_disable() --> mtk_dsi_stop(); /* sometimes make vblank timeout in atomic_disable */ --> mtk_dsi_poweroff(); 2. mtk_drm_crtc_atomic_disable() --> drm_crtc_wait_one_vblank(); ... --> mtk_dsi_ddp_stop() --> mtk_dsi_poweroff(); mtk_dsi_poweroff() has reference count design, change to make mtk_dsi_stop() called in mtk_dsi_poweroff() when refcount is 0. Fixes: 0707632b5bac ("drm/mediatek: update DSI sub driver flow for sending commands to panel") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-06-04drm/mediatek: clear num_pipes when unbind driverHsin-Yi Wang
num_pipes is used for mutex created in mtk_drm_crtc_create(). If we don't clear num_pipes count, when rebinding driver, the count will be accumulated. From mtk_disp_mutex_get(), there can only be at most 10 mutex id. Clear this number so it starts from 0 in every rebind. Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-06-04drm/mediatek: call drm_atomic_helper_shutdown() when unbinding driverHsin-Yi Wang
shutdown all CRTC when unbinding drm driver. Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-06-04drm/mediatek: unbind components in mtk_drm_unbind()Hsin-Yi Wang
Unbinding components (i.e. mtk_dsi and mtk_disp_ovl/rdma/color) will trigger master(mtk_drm)'s .unbind(), and currently mtk_drm's unbind won't actually unbind components. During the next bind, mtk_drm_kms_init() is called, and the components are added back. .unbind() should call mtk_drm_kms_deinit() to unbind components. And since component_master_del() in .remove() will trigger .unbind(), which will also unregister device, it's fine to remove original functions called here. Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-06-04drm/mediatek: fix unbind functionsHsin-Yi Wang
detatch panel in mtk_dsi_destroy_conn_enc(), since .bind will try to attach it again. Fixes: 2e54c14e310f ("drm/mediatek: Add DSI sub driver") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-06-03ARM: dts: meson8b: update with SPDX Licence identifierNeil Armstrong
While the text specifies "of the GPL or the X11 license" the actual license text matches the MIT license as specified at [0] [0] https://spdx.org/licenses/MIT.html Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-03ARM: dts: meson8b-odroidc1: update with SPDX Licence identifierNeil Armstrong
While the text specifies "of the GPL or the X11 license" the actual license text matches the MIT license as specified at [0] [0] https://spdx.org/licenses/MIT.html Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-03ARM: dts: meson8b-mxq: update with SPDX Licence identifierNeil Armstrong
While the text specifies "of the GPL or the X11 license" the actual license text matches the MIT license as specified at [0] [0] https://spdx.org/licenses/MIT.html Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-03ARM: dts: meson8: update with SPDX Licence identifierNeil Armstrong
While the text specifies "of the GPL or the X11 license" the actual license text matches the MIT license as specified at [0] [0] https://spdx.org/licenses/MIT.html Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-03ARM: dts: meson8-minix-neo-x8: update with SPDX Licence identifierNeil Armstrong
While the text specifies "of the GPL or the X11 license" the actual license text matches the MIT license as specified at [0] [0] https://spdx.org/licenses/MIT.html Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-03ARM: dts: meson6: update with SPDX Licence identifierNeil Armstrong
While the text specifies "of the GPL or the X11 license" the actual license text matches the MIT license as specified at [0] [0] https://spdx.org/licenses/MIT.html Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-03ARM: dts: meson6-atv1200: update with SPDX Licence identifierNeil Armstrong
While the text specifies "of the GPL or the X11 license" the actual license text matches the MIT license as specified at [0] [0] https://spdx.org/licenses/MIT.html Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-03ARM: dts: meson: update with SPDX Licence identifierNeil Armstrong
While the text specifies "of the GPL or the X11 license" the actual license text matches the MIT license as specified at [0] [0] https://spdx.org/licenses/MIT.html Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-03net: sfp: read eeprom in maximum 16 byte incrementsRussell King
Some SFP modules do not like reads longer than 16 bytes, so read the EEPROM in chunks of 16 bytes at a time. This behaviour is not specified in the SFP MSAs, which specifies: "The serial interface uses the 2-wire serial CMOS E2PROM protocol defined for the ATMEL AT24C01A/02/04 family of components." and "As long as the SFP+ receives an acknowledge, it shall serially clock out sequential data words. The sequence is terminated when the host responds with a NACK and a STOP instead of an acknowledge." We must avoid breaking a read across a 16-bit quantity in the diagnostic page, thankfully all 16-bit quantities in that page are naturally aligned. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-03ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805Martin Blumenstingl
The TRONFY MXQ comes with either 1GB or 2GB RAM. Both variants share (like most boards based on Amlogic reference designs): - 10/100 PHY (IC Plus IP101GR) with GPIOH_4 being the reset line and GPIOH_3 the interrupt line - SD card slot with the card detection GPIO at CARD_6 - VCCK is generated by PWM_C with a period of 1148ns and XTAL as input clock - USB OTG exposed on one of the USB-A connectors - 4-port USB hub with 3 ports exposed to the outside There seem the multiple board revision out there according to various forum posts: - storage: eMMC or NAND flash - wifi: Ampak AP6210 or Realtek 8189 Add support for the following functionality: - SoC temperature (hwmon) - changing the CPU voltage - Ethernet connectivity - SD card - USB Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: hexdump <hexdump0815@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-03selftests: set sysctl bc_forwarding properly in router_broadcast.shXin Long
sysctl setting bc_forwarding for $rp2 is needed when ping_test_from h2, otherwise the bc packets from $rp2 won't be forwarded. This patch is to add this setting for $rp2. Also, as ping_test_from does grep "$from" only, which could match some unexpected output, some test case doesn't really work, like: # ping_test_from $h2 198.51.200.255 198.51.200.2 PING 198.51.200.255 from 198.51.100.2 veth3: 56(84) bytes of data. 64 bytes from 198.51.100.1: icmp_seq=1 ttl=64 time=0.336 ms When doing grep $form (198.51.200.2), the output could still match. So change to grep "bytes from $from" instead. Fixes: 40f98b9af943 ("selftests: add a selftest for directed broadcast forwarding") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-03net: ethernet: mediatek: Use NET_IP_ALIGN to judge if HW RX_2BYTE_OFFSET is ↵Sean Wang
enabled Should only enable HW RX_2BYTE_OFFSET function in the case NET_IP_ALIGN equals to 2. Signed-off-by: Mark Lee <mark-mc.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-03net: ethernet: mediatek: Use hw_feature to judge if HWLRO is supportedSean Wang
Should hw_feature as hardware capability flags to check if hardware LRO got support. Signed-off-by: Mark Lee <mark-mc.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-03Merge tag 'arc-5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - Fix for userspace trying to access kernel vaddr space - HSDK platform DT updates - Cleanup some build warnings * tag 'arc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-hsdk] Get rid of inappropriate PHY settings ARC: [plat-hsdk]: Add support of Vivante GPU ARC: [plat-hsdk]: enable creg-gpio controller ARC: [plat-hsdk]: Add missing FIFO size entry in GMAC node ARC: [plat-hsdk]: Add missing multicast filter bins number to GMAC node ARC: mm: SIGSEGV userspace trying to access kernel virtual memory ARC: fix build warnings
2019-06-03net: ethernet: ti: cpsw_ethtool: fix ethtool ring param setIvan Khoronzhuk
Fix ability to set RX descriptor number, the reason - initially "tx_max_pending" was set incorrectly, but the issue appears after adding sanity check, so fix is for "sanity" patch. Fixes: 37e2d99b59c476 ("ethtool: Ensure new ring parameters are within bounds during SRINGPARAM") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-03rcu: locking and unlocking need to always be at least barriersLinus Torvalds
Herbert Xu pointed out that commit bb73c52bad36 ("rcu: Don't disable preemption for Tiny and Tree RCU readers") was incorrect in making the preempt_disable/enable() be conditional on CONFIG_PREEMPT_COUNT. If CONFIG_PREEMPT_COUNT isn't enabled, the preemption enable/disable is a no-op, but still is a compiler barrier. And RCU locking still _needs_ that compiler barrier. It is simply fundamentally not true that RCU locking would be a complete no-op: we still need to guarantee (for example) that things that can trap and cause preemption cannot migrate into the RCU locked region. The way we do that is by making it a barrier. See for example commit 386afc91144b ("spinlocks and preemption points need to be at least compiler barriers") from back in 2013 that had similar issues with spinlocks that become no-ops on UP: they must still constrain the compiler from moving other operations into the critical region. Now, it is true that a lot of RCU operations already use READ_ONCE() and WRITE_ONCE() (which in practice likely would never be re-ordered wrt anything remotely interesting), but it is also true that that is not globally the case, and that it's not even necessarily always possible (ie bitfields etc). Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Fixes: bb73c52bad36 ("rcu: Don't disable preemption for Tiny and Tree RCU readers") Cc: stable@kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-03Merge tag 'nds32-for-linux-5.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux Pull nds32 fixes from Greentime Hu: - fix warning for math-emu - fix nds32 fpu exception handling - fix nds32 fpu emulation implementation * tag 'nds32-for-linux-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: nds32: add new emulations for floating point instruction nds32: Avoid IEX status being incorrectly modified math-emu: Use statement expressions to fix Wshift-count-overflow warning
2019-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Three bug fixes, and TLB flushing one is of particular brown paper bag quality..." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD mdesc: fix a missing-check bug in get_vdev_port_node_info() sparc64: Fix regression in non-hypervisor TLB flush xcall
2019-06-03Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Several fixes, some of them for CVEs" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: scsi: add weight support vhost: vsock: add weight support vhost_net: fix possible infinite loop vhost: introduce vhost_exceeds_weight() virtio: Fix indentation of VIRTIO_MMIO virtio: add unlikely() to WARN_ON_ONCE()
2019-06-03ASoC: SOF: fix DSP oops definitions in FW ABIKai Vehmanen
The definitions for DSP oops structures were not aligned correctly to current FW ABI version 3.6.0, leading to invalid data being printed out to debug logs. Fix the structs and update related platform code accordingly. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-03ASoC: hda: fix unbalanced codec dev refcount for HDA_DEV_ASOCRanjani Sridharan
HDA_DEV_ASOC type codec device refcounts are managed differently from HDA_DEV_LEGACY devices. The refcount is released explicitly in snd_hdac_ext_bus_device_remove() for ASOC type devices. So, remove the put_device() call in snd_hda_codec_dev_free() for such devices to make the refcount balanced. This will prevent the NULL pointer exception when the codec driver is released after the card is freed. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-03ASoC: SOF: ipc: replace fw ready bitfield with explicit bit orderingSlawomir Blauciak
Previously the structure used bitfields, which do not guarantee bit ordering. This change makes sure the order is clearly defined. It also renames and repurposes the field for general use. Signed-off-by: Slawomir Blauciak <slawomir.blauciak@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-03ASoC: SOF: bump to ABI 3.6Pierre-Louis Bossart
We had a couple of misses with ABI changes, e.g. for Xtensa oops information and the integration of sound trigger, before we set-up a formal process to track evolutions. With this patch, the SOF kernel patches are officially aligned with the firmware 3.6 level. Changing this level has no impact on existing users and is fully backwards-compatible. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-03ASoC: SOF: soundwire: add initial soundwire supportPan Xiuli
Add soundwire dai type and update ABI version. Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-03ASoC: SOF: uapi: mirror firmware changesPierre-Louis Bossart
We missed these two definitions for GDB support and component notifications, they are defined for the SOF firmware. Since they are not used by the kernel so far, we can still add them without any ABI change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-03ASoC: Intel: Baytrail: add quirk for Aegex 10 (RU2) tabletKovács Tamás
This tablet has an incorrect acpi identifier just like Thinkpad10 tablet, which is why it is trying to load the RT5640 driver instead of the RT5762 driver. The RT5640 driver, on the other hand, checks the hardware ID, so no driver are loaded during boot. This fix resolves to load the RT5672 driver on this tablet during boot. It also provides the correct IO configuration, like the jack detect mode 3, for 1.8V pullup. I would like to thank Pierre-Louis Bossart for helping with this patch. Signed-off-by: Kovács Tamás <kepszlok@zohomail.eu> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-03xfs: inode btree scrubber should calculate im_boffset correctlyDarrick J. Wong
The im_boffset field is in units of bytes, whereas XFS_INO_OFFSET returns a value in units of inodes. Convert the units so that scrub on a 64k-block filesystem works correctly. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-06-03arm64: dts: armada-3720-espressobin: correct spi nodeTomasz Maciej Nowak
The manufacturer of this board, ships it with various SPI NOR chips and increments U-Boot bootloader version along the time. There is no way to tell which is placed on the board since no revision bump takes place. This creates two issues. The first, cosmetic. Since the NOR chip may differ, there's message on boot stating that kernel expected w25q32dw and found different one. To correct this, remove optional device-specific compatible string. Being here lets replace bogus "spi-flash" compatible string with proper one. The second is linked to partitions layout, it changed after commit: 81e7251252 ("arm64: mvebu: config: move env to the end of the 4MB boot device") in Marvells downstream U-Boot fork [1], shifting environment location to the end of boot device. Since the new boards will have U-Boot with this change, it'll lead to improper results writing or reading from these partitions. We can't tell if users will update bootloader to recent version provided on manufacturer website, so lets drop partitons layout. 1. https://github.com/MarvellEmbeddedProcessors/u-boot-marvell.git Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-06-03arm64: dts: marvell: Disable AP I2C on Armada-8040-DBKonstantin Porotchkin
While AP I2C bus was available to users in early revisions of the SoC, this is not the case anymore since eMMC was connected to the AP. Most users do not have access to this I2C bus so do not enable it in the board device tree. As there are three I2C buses enabled on this board, add an alias to be sure the two other buses keep their initial numbering. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [<miquel.raynal@bootlin.com>: Reword commit message, add alias] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
generated by cgit (git 2.34.1) at 2025-09-22 00:54:56 +0000