Age | Commit message (Collapse) | Author |
|
If we're doing a reflink copy of existing reflinked data, we may only
set REFLINK_P_MAY_UPDATE_OPTIONS if it was set on the reflink pointer
we're copying from.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- even more Xbox controllers added to xpad driver: Turtle Beach Recon
Wired Controller, Turtle Beach Stealth Ultra, and PowerA Wired
Controller
- a fix to Synaptics RMI driver to not crash if controller reports
unsupported version of F34 (firmware flash) function
* tag 'input-for-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi - fix crash with unsupported versions of F34
Input: xpad - add more controllers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few final fixes for v6.15, some driver fixes for the Freescale DSPI
driver pulled over from their vendor code and another instance of the
fixes Greg has been sending throughout the kernel for constification
of the bus_type in driver core match() functions"
* tag 'spi-fix-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-dspi: Reset SR flags before sending a new message
spi: spi-fsl-dspi: Halt the module after a new message transfer
spi: spi-fsl-dspi: restrict register range for regmap access
spi: use container_of_cont() for to_spi_device()
|
|
Add SAMA7D65 RTT compatible to DT bindings documentation.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/183474a65377f4030360166a5f2659af7323e82b.1744666011.git.Ryan.Wanner@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add SAMA7D65 RTC compatible to DT bindings documentation.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/a274485331628be0bcf382b1ba489d4555fa49c8.1744666011.git.Ryan.Wanner@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When an application sets and enables an alarm on Loongson RTC devices,
the alarm notification fails to propagate to userspace because the
ACPI event handler omits calling rtc_update_irq().
As a result, processes waiting via select() or poll() on RTC device
files fail to receive alarm notifications.
The ACPI interrupt is also triggered multiple times. In loongson_rtc_handler,
we need to clear TOY_MATCH0_REG to resolve this issue.
Fixes: 09471d8f5b39 ("rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr()")
Fixes: 1b733a9ebc3d ("rtc: Add rtc driver for the Loongson family chips")
Signed-off-by: Liu Dalin <liudalin@kylinsec.com.cn>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20250509084416.7979-1-liudalin@kylinsec.com.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Implement the RTC driver for CV1800, which able to provide time alarm.
Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250507195626.502240-1-alexander.sverdlin@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 4e64350f42e2 ("rtc: add STM32 RTC driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-8-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The driver only support OF probe so drop the unused platform module
alias.
Fixes: ae05c95074e0 ("rtc: s3c: add s3c_rtc_data structure to use variant data instead of s3c_cpu_type")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Fixes: 0d297df03890 ("ARM: s3c: simplify platform code")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-7-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 5a418558cdae ("rtc: pm8xxx: add support for devicetree")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-6-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 24e1f2c9383e ("rtc: ingenic: Only support probing from devicetree")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20250423130318.31244-5-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 80ca3277bc7f ("rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-4-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The driver only supports OF probe so drop the unused platform module
alias.
Fixes: dd3bf50b35e3 ("rtc: cpcap: new rtc driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250423130318.31244-3-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 288d9cf1764a ("rtc: at91rm9200: use of_device_get_match_data()")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-2-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
On many Qualcomm platforms the PMIC RTC control and time registers are
read-only so that the RTC time can not be updated. Instead an offset
needs be stored in some machine-specific non-volatile memory, which a
driver can take into account.
On platforms where the offset is stored in a Qualcomm specific UEFI
variable the variables are also accessed in a non-standard way, which
means that the OS cannot assume that the variable service is available
by the time the driver probes.
Use the new 'qcom,uefi-rtc-info' property to determine whether to probe
defer until the UEFI offset becomes available so that the offset can be
used also when the RTC driver is built in or when a dependency of the
UEFI variable driver is built as a module (e.g. the driver for the SCM
interconnects).
Fixes: bba38b874886 ("rtc: pm8xxx: add support for uefi offset")
Reported-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/lkml/CAF6AEGsfke=x0p1b2-uNX6DuQfRyEjVbJaxTbVLDT2YvSkGJbg@mail.gmail.com/
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250423075143.11157-3-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
On many Qualcomm platforms the PMIC RTC control and time registers are
read-only so that the RTC time can not be updated. Instead an offset
needs be stored in some machine-specific non-volatile memory, which a
driver can take into account.
On platforms where the offset is stored in a Qualcomm specific UEFI
variable the variables are also accessed in a non-standard way, which
means that the OS cannot assume that the variable service is available
by the time the RTC driver probes.
Add a 'qcom,uefi-rtc-info' boolean flag to indicate that the RTC offset
is stored in a Qualcomm specific UEFI variable so that the OS can
determine whether to wait for it to become available.
The UEFI variable is
882f8c2b-9646-435f-8de5-f208ff80c1bd-RTCInfo
and holds a 12-byte structure where the first four bytes is a GPS time
offset in little-endian byte order.
Link: https://lore.kernel.org/all/aAecIkgmTTlThKEZ@hovoldconsulting.com/
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250423075143.11157-2-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Enabling the compile test should not cause automatic enabling of all
drivers, but only allow to choose to compile them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250417074640.81363-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
KMSAN complains that alarm->time can be used uninitialized. Pass 0 to
trace_rtc_read_alarm in case it has not been set.
Link: https://lore.kernel.org/r/20250408144203.3869821-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The Kconfig file for controller drivers is only sourced if the I3C
symbol is enabled. No need to check for that in individual drivers.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250506075247.1545-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Use the clk_bulk API to handle clocks, so the code can support different
numbers of clocks more easily. Make the code cleaner and more flexible.
No change in functionality.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250427083230.3325700-3-carlos.song@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add compatible string "nxp,imx94-i3c" and "nxp,imx95-i3c" for the i.MX94
chip and i.MX95 chip. Backward is compatible with "silvaco,i3c-master-v1".
Also i.MX94 and i.MX95 I3C only need two clocks and Legacy I3C needs
three clocks. So add restrictions for clock and clock-names properties
for different Socs.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250427083230.3325700-2-carlos.song@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fix from Joerg Roedel:
- core: skip PASID validation for devices without PASID support
* tag 'iommu-fixes-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: Skip PASID validation for devices without PASID capability
|
|
Currently, the kvm_riscv_vcpu_sbi_system_reset() function locks
vcpu->arch.mp_state_lock when updating tmp->arch.mp_state.mp_state
which is incorrect hence fix it.
Fixes: 2121cadec45a ("RISCV: KVM: Introduce mp_state_lock to avoid lock inversion")
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250523104725.2894546-4-rkrcmar@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add rockchip,rk3562-wdt for rk3562.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250506025715.33595-2-kever.yang@rock-chips.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add an entry for 'fsl,imx8qm-sc-wdt' as imx8qm also contains the SCU
watchdog block.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Oliver Graute <oliver.graute@kococonnector.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250414-imx8qm-watchdog-v2-1-449265a9da4e@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The S32 platform has several Watchdog Timer available and tied with a
CPU. The SWT0 is the only one which directly asserts the reset line,
other SWT require an external setup to configure the reset behavior
which is not part of this change.
As a side note, in the NXP documentation, the s32g2 and s32g3
reference manuals refer the watchdog as the 'Software Timer Watchdog'
where the name can be misleading as it is actually a hardware
watchdog.
The maximum watchdog timeout value depends on the clock feeding the
SWT counter which is 32bits wide. On the s32g274-rb2, the clock has a
rate of 51MHz which result on 83 seconds maximum timeout.
The timeout can be specified via the device tree with the usual
existing bindings 'timeout-sec' or via the module param timeout.
The watchdog can be loaded with the 'nowayout' option, preventing the
watchdog to be stopped.
The watchdog can be started at boot time with the 'early-enable'
option, thus letting the watchdog framework to service the watchdog
counter.
The watchdog support the magic character to stop when the userspace
releases the device.
Cc: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Cc: Thomas Fossati <thomas.fossati@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Alexandru-Catalin Ionita <alexandru-catalin.ionita@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250410082616.1855860-3-daniel.lezcano@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Describe the Software Watchdog Timer available on the S32G platforms.
Cc: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Cc: Thomas Fossati <thomas.fossati@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250410082616.1855860-2-daniel.lezcano@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Correct kerneldoc syntax or drop kerneldoc entirely for function
comments not being kerneldoc to fix warnings like:
pretimeout_noop.c:19: warning: Function parameter or struct member 'wdd' not described in 'pretimeout_noop'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250406203531.61322-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Device can be unbound or probe can fail, so driver must also release
memory for the wakeup source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250406203531.61322-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Enabling the compile test should not cause automatic enabling of all
drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250404123941.362620-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for on-stack definitions of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/watchdog/cros_ec_wdt.c:29:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/Z-WG6_uhWsy_FCq3@kspp
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
We have to wait at least the minimium time for the watchdog window
(TWDMIN) before writings to the wdt register after the
watchdog is activated.
Otherwise the chip will assert TWD_ERROR and power down to reset mode.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-4-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
If the watchog is started by the bootloader, we do not want the watchdog
to be disabled.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-3-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Introduce the `timeout` module parameter and pass it to
watchdog_init_timeout(). If the parameter is not set or contains an
invalid value, fallback on the `timeout-secs` devicetree property value.
If none of the above is valid, go for the old default value.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-2-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add nowayout module parameter for not stopping the
watchdog when userspace application quits.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-1-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The test might fail on the Arm64 platform with the error:
# perf test -vvv "Track with sched_switch"
Missing sched_switch events
#
The issue is caused by incorrect handling of timestamp comparisons. The
comparison result, a signed 64-bit value, was being directly cast to an
int, leading to incorrect sorting for sched events.
The case does not fail everytime, usually I can trigger the failure
after run 20 ~ 30 times:
# while true; do perf test "Track with sched_switch"; done
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
I used cross compiler to build Perf tool on my host machine and tested on
Debian / Juno board. Generally, I think this issue is not very specific
to GCC versions. As both internal CI and my local env can reproduce the
issue.
My Host Build compiler:
# aarch64-linux-gnu-gcc --version
aarch64-linux-gnu-gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0
Juno Board:
# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 12 (bookworm)
Release: 12
Codename: bookworm
Fix this by explicitly returning 0, 1, or -1 based on whether the result
is zero, positive, or negative.
Fixes: d44bc558297222d9 ("perf tests: Add a test for tracking with sched_switch")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250331172759.115604-1-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
Second set of Counter updates for 6.16
Adds compatible for STM32MP25 SoC and enables respective encoder
capability for stm32-timer-cnt. Implements watch_validate callback for
microchip-tcb-capture.
* tag 'counter-updates-for-6.16b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: microchip-tcb-capture: Add watch validation support
counter: stm32-timer-cnt: add support for stm32mp25
|
|
nvkm_device_tegra_resource_addr()
The nvkm_device_tegra_resource() function returns a mix of error pointers
and NULL. The callers only expect it to return NULL on error. Change it
to only return NULL.
Fixes: 76b8f81a5b92 ("drm/nouveau: improve handling of 64-bit BARs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/dri-devel/334404bdf60765cb5a8e855a74c688bc537531ee.camel@nvidia.com/T/#t
|
|
Large folios aren't supported without TRANSPARENT_HUGEPAGE
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We can't unlock a should_be_locked path unless we're in a transaction
restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Different versions differ on the size of the blacklist range; it is
theoretically possible that we could end up with blacklisted journal
sequence numbers newer than the newest seq we find in the journal, and
pick a new start seq that's blacklisted.
Explicitly check for this in bch2_fs_journal_start().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't want to change the bucket gen, on gen mismatch: it's possible
to have multiple btree nodes with different gens in the same bucket that
we want to keep, if we have to recover from btree node scan.
It's also not necessary to set g->gen_valid; add a comment to that
effect.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This was lost in the giant recovery pass rework - but it's used heavily
by bcachefs subcommand utilities.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we go to allocate and find taht a bucket in the freespace btree is
actually allocated, we're supposed to return nonzero to tell the
allocator to skip it.
This fixes an emergency read only due to a bucket/ptr gen mismatch - we
also don't return the correct bucket gen when this happens.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes: 010c89468134 ("bcachefs: Check for casefolded dirents in non casefolded dirs")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull, on target to be quiet, just one amdgpu, one
edid and a few minor xe fixes.
edid:
- fix HDR metadata reset
amdgpu:
- Hibernate fix
xe:
- Make sure to check all forcewakes when dumping mocs
- Fix wrong use of read64 on 32b register
- Synchronize Panther Lake PCI IDs"
* tag 'drm-fixes-2025-05-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/ptl: Update the PTL pci id table
drm/xe: Use xe_mmio_read32() to read mtcfg register
drm/xe/mocs: Check if all domains awake
Revert "drm/amd: Keep display off while going into S4"
drm/edid: fixed the bug that hdr metadata was not reset
|
|
into soc/late
RISC-V Devicetrees for v6.16
Sophgo:
Add Pinctrl & SPI support for SG2042 SoC, and
refactor the dts of cv18xx to facilitate adding
support for arm core later (SG200X has two cores,
one is RISC-V and another is ARM64).
Also add initial support for Sophgo SG2044/SRD3-10.
SRD3-10 board bases on Sophgo SG2044 SoC and
initial support includes uart only. This part of
the changes involves some modifications to dts
and bindings.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v6.16' of https://github.com/sophgo/linux:
riscv: dts: sophgo: switch precise compatible for existed clock device for CV18XX
riscv: dts: sophgo: Add initial device tree of Sophgo SRD3-10
dt-bindings: riscv: sophgo: Add SG2044 compatible string
dt-bindings: interrupt-controller: Add Sophgo SG2044 PLIC
dt-bindings: interrupt-controller: Add Sophgo SG2044 CLINT mswi
riscv: dts: sopgho: use SOC_PERIPHERAL_IRQ to calculate interrupt number
riscv: dts: sophgo: rename header file cv18xx.dtsi to cv180x.dtsi
riscv: dts: sophgo: Move riscv cpu definition to a separate file
riscv: dts: sophgo: Move all soc specific device into soc dtsi file
riscv: sophgo: dts: Add spi controller for SG2042
riscv: dts: sophgo: sg2042: add pinctrl support
Link: https://lore.kernel.org/r/MA0P287MB22622FA23ECF9B9216735FA0FE9CA@MA0P287MB2262.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix a SLPC debugfs NULL pointer dereference (Aradhya)
- Fix an arbitrary value sysfs read return (Aradhya)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aDAxCgfm7HJbrchD@fedora
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Fix for Thunderbolt sink disconnect on MTL/ARL/LNL
- Fix for DDI port clock select mask on PTL+
- Add error checks for alloc_ordered_workqueue() and alloc_workqueue() in display
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aC7LQUtxXKgOVTVt@jlahtine-mobl
|
|
The devm_drm_panel_alloc() function returns error pointers, it doesn't
return NULL. Update the check to match.
Fixes: 4fca6849864d ("drm/panel: Add Novatek NT37801 panel driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/aDCdn9r_ZAUTRpWn@stanley.mountain
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|