summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-06-19net: airoha: Always check return value from airoha_ppe_foe_get_entry()Lorenzo Bianconi
airoha_ppe_foe_get_entry routine can return NULL, so check the returned pointer is not NULL in airoha_ppe_foe_flow_l2_entry_update() Fixes: b81e0f2b58be3 ("net: airoha: Add FLOW_CLS_STATS callback support") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250618-check-ret-from-airoha_ppe_foe_get_entry-v2-1-068dcea3cc66@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19NFC: nci: uart: Set tty->disc_data only in success pathKrzysztof Kozlowski
Setting tty->disc_data before opening the NCI device means we need to clean it up on error paths. This also opens some short window if device starts sending data, even before NCIUARTSETDRIVER IOCTL succeeded (broken hardware?). Close the window by exposing tty->disc_data only on the success path, when opening of the NCI device and try_module_get() succeeds. The code differs in error path in one aspect: tty->disc_data won't be ever assigned thus NULL-ified. This however should not be relevant difference, because of "tty->disc_data=NULL" in nci_uart_tty_open(). Cc: Linus Torvalds <torvalds@linuxfoundation.org> Fixes: 9961127d4bce ("NFC: nci: add generic uart support") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20250618073649.25049-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher()Nathan Chancellor
After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which causes CONFIG_KASAN to be enabled in allmodconfig again, arm64 allmodconfig builds with older versions of clang (15 through 17) show an instance of -Wframe-larger-than (which breaks the build with CONFIG_WERROR=y): drivers/staging/rtl8723bs/core/rtw_security.c:1287:5: error: stack frame size (2208) exceeds limit (2048) in 'rtw_aes_decrypt' [-Werror,-Wframe-larger-than] 1287 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) | ^ This comes from aes_decipher() being inlined in rtw_aes_decrypt(). Running the same build with CONFIG_FRAME_WARN=128 shows aes_cipher() also uses a decent amount of stack, just under the limit of 2048: drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1952) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than] 864 | static signed int aes_cipher(u8 *key, uint hdrlen, | ^ -Rpass-analysis=stack-frame-layout only shows one large structure on the stack, which is the ctx variable inlined from aes128k128d(). A good number of the other variables come from the additional checks of fortified string routines, which are present in memset(), which both aes_cipher() and aes_decipher() use to initialize some temporary buffers. In this case, since the size is known at compile time, these additional checks should not result in any code generation changes but allmodconfig has several sanitizers enabled, which may make it harder for the compiler to eliminate the compile time checks and the variables that come about from them. The memset() calls are just initializing these buffers to zero, so use '= {}' instead, which is used all over the kernel and does the exact same thing as memset() without the fortify checks, which drops the stack usage of these functions by a few hundred kilobytes. drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1584) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than] 864 | static signed int aes_cipher(u8 *key, uint hdrlen, | ^ drivers/staging/rtl8723bs/core/rtw_security.c:1271:5: warning: stack frame size (1456) exceeds limit (128) in 'rtw_aes_decrypt' [-Wframe-larger-than] 1271 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) | ^ Cc: stable@vger.kernel.org Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250609-rtl8723bs-fix-clang-arm64-wflt-v1-1-e2accba43def@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().Kuniyuki Iwashima
syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ipv6_rcv+0xf9/0x490 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x12e/0x1f0 net/core/dev.c:5896 __netif_receive_skb+0x1d/0x170 net/core/dev.c:6009 process_backlog+0x41e/0x13b0 net/core/dev.c:6357 __napi_poll+0xbd/0x710 net/core/dev.c:7191 napi_poll net/core/dev.c:7260 [inline] net_rx_action+0x9de/0xde0 net/core/dev.c:7382 handle_softirqs+0x19a/0x770 kernel/softirq.c:561 do_softirq.part.0+0x36/0x70 kernel/softirq.c:462 </IRQ> <TASK> do_softirq arch/x86/include/asm/preempt.h:26 [inline] __local_bh_enable_ip+0xf1/0x110 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0xc2a/0x3c40 net/core/dev.c:4679 dev_queue_xmit include/linux/netdevice.h:3313 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip6_finish_output2+0xd69/0x1f80 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x5dc/0xd60 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x24b/0x8d0 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:459 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_xmit+0xbbc/0x20d0 net/ipv6/ip6_output.c:366 inet6_csk_xmit+0x39a/0x720 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x1a7b/0x3b40 net/ipv4/tcp_output.c:1471 tcp_transmit_skb net/ipv4/tcp_output.c:1489 [inline] tcp_send_syn_data net/ipv4/tcp_output.c:4059 [inline] tcp_connect+0x1c0c/0x4510 net/ipv4/tcp_output.c:4148 tcp_v6_connect+0x156c/0x2080 net/ipv6/tcp_ipv6.c:333 __inet_stream_connect+0x3a7/0xed0 net/ipv4/af_inet.c:677 tcp_sendmsg_fastopen+0x3e2/0x710 net/ipv4/tcp.c:1039 tcp_sendmsg_locked+0x1e82/0x3570 net/ipv4/tcp.c:1091 tcp_sendmsg+0x2f/0x50 net/ipv4/tcp.c:1358 inet6_sendmsg+0xb9/0x150 net/ipv6/af_inet6.c:659 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xf4/0x2a0 net/socket.c:733 __sys_sendto+0x29a/0x390 net/socket.c:2187 __do_sys_sendto net/socket.c:2194 [inline] __se_sys_sendto net/socket.c:2190 [inline] __x64_sys_sendto+0xe1/0x1c0 net/socket.c:2190 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xc3/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f06553c47ed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f0653a06fc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f0655605fa0 RCX: 00007f06553c47ed RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000000b RBP: 00007f065545db38 R08: 0000200000000140 R09: 000000000000001c R10: f7384d4ea84b01bd R11: 0000000000000246 R12: 0000000000000000 R13: 00007f0655605fac R14: 00007f0655606038 R15: 00007f06539e7000 </TASK> Modules linked in: [1]: dnf install -y selinux-policy-targeted policycoreutils netlabel_tools procps-ng nmap-ncat mount -t selinuxfs none /sys/fs/selinux load_policy netlabelctl calipso add pass doi:1 netlabelctl map del default netlabelctl map add default address:::1 protocol:calipso,1 sysctl net.ipv4.tcp_syncookies=2 nc -l ::1 80 & nc ::1 80 Fixes: e1adea927080 ("calipso: Allow request sockets to be relabelled by the lsm.") Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: John Cheung <john.cs.hey@gmail.com> Closes: https://lore.kernel.org/netdev/CAP=Rh=MvfhrGADy+-WJiftV2_WzMH4VEhEFmeT28qY+4yxNu4w@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Acked-by: Paul Moore <paul@paul-moore.com> Link: https://patch.msgid.link/20250617224125.17299-1-kuni1840@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19MAINTAINERS: Remove Shannon Nelson from MAINTAINERS fileShannon Nelson
Brett Creeley is taking ownership of AMD/Pensando drivers while I wander off into the sunset with my retirement this month. I'll still keep an eye out on a few topics for awhile, and maybe do some free-lance work in the future. Meanwhile, thank you all for the fun and support and the many learning opportunities :-). Special thanks go to DaveM for merging my first patch long ago, the big ionic patchset a few years ago, and my last patchset last week. Redirect things to a non-corporate account. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Link: https://patch.msgid.link/20250616224437.56581-1-shannon.nelson@amd.com [Jakub: squash in the .mailmap update] Signed-off-by: Shannon Nelson <sln@onemain.com> Link: https://patch.msgid.link/20250619010603.1173141-1-sln@onemain.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19drm/xe: Fix early wedge on GuC load failureDaniele Ceraolo Spurio
When the GuC fails to load we declare the device wedged. However, the very first GuC load attempt on GT0 (from xe_gt_init_hwconfig) is done before the GT1 GuC objects are initialized, so things go bad when the wedge code attempts to cleanup GT1. To fix this, check the initialization status in the functions called during wedge. Fixes: 7dbe8af13c18 ("drm/xe: Wedge the entire device") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Zhanjun Dong <zhanjun.dong@intel.com> Cc: stable@vger.kernel.org # v6.12+: 1e1981b16bb1: drm/xe: Fix taking invalid lock on wedge Cc: stable@vger.kernel.org # v6.12+ Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250611214453.1159846-2-daniele.ceraolospurio@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 0b93b7dcd9eb888a6ac7546560877705d4ad61bf) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-19ASoC: Intel: sof-function-topology-lib: Print out the unsupported dmic countPeter Ujfalusi
It is better to print out the non supported num_dmics than printing that it is not matching with 2 or 4. Fixes: 2fbeff33381c ("ASoC: Intel: add sof_sdw_get_tplg_files ops") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Link: https://patch.msgid.link/20250619104705.26057-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-19drm/xe: Fix memset on iomemLucas De Marchi
It should rather use xe_map_memset() as the BO is created with XE_BO_FLAG_VRAM_IF_DGFX in xe_guc_pc_init(). Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: stable@vger.kernel.org Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250612-vmap-vaddr-v1-1-26238ed443eb@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 21cf47d89fba353b2d5915ba4718040c4cb955d3) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-19drm/xe/bmg: Update Wa_16023588340Vinay Belgaumkar
This allows for additional L2 caching modes. Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340") Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://lore.kernel.org/r/20250612-wa-14022085890-v4-2-94ba5dcc1e30@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 6ab42fa03d4c88a0ddf5e56e62794853b198e7bf) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-19ublk: santizize the arguments from userspace when adding a deviceRonnie Sahlberg
Sanity check the values for queue depth and number of queues we get from userspace when adding a device. Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Fixes: 62fe99cef94a ("ublk: add read()/write() support for ublk char device") Link: https://lore.kernel.org/r/20250619021031.181340-1-ronniesahlberg@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-19sunrpc: handle SVC_GARBAGE during svc auth processing as auth errorJeff Layton
tianshuo han reported a remotely-triggerable crash if the client sends a kernel RPC server a specially crafted packet. If decoding the RPC reply fails in such a way that SVC_GARBAGE is returned without setting the rq_accept_statp pointer, then that pointer can be dereferenced and a value stored there. If it's the first time the thread has processed an RPC, then that pointer will be set to NULL and the kernel will crash. In other cases, it could create a memory scribble. The server sunrpc code treats a SVC_GARBAGE return from svc_authenticate or pg_authenticate as if it should send a GARBAGE_ARGS reply. RFC 5531 says that if authentication fails that the RPC should be rejected instead with a status of AUTH_ERR. Handle a SVC_GARBAGE return as an AUTH_ERROR, with a reason of AUTH_BADCRED instead of returning GARBAGE_ARGS in that case. This sidesteps the whole problem of touching the rpc_accept_statp pointer in this situation and avoids the crash. Cc: stable@kernel.org Fixes: 29cd2927fb91 ("SUNRPC: Fix encoding of accepted but unsuccessful RPC replies") Reported-by: tianshuo han <hantianshuo233@gmail.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-06-19nfsd: use threads array as-is in netlink interfaceJeff Layton
The old nfsdfs interface for starting a server with multiple pools handles the special case of a single entry array passed down from userland by distributing the threads over every NUMA node. The netlink control interface however constructs an array of length nfsd_nrpools() and fills any unprovided slots with 0's. This behavior defeats the special casing that the old interface relies on. Change nfsd_nl_threads_set_doit() to pass down the array from userland as-is. Fixes: 7f5c330b2620 ("nfsd: allow passing in array of thread counts via netlink") Cc: stable@vger.kernel.org Reported-by: Mike Snitzer <snitzer@kernel.org> Closes: https://lore.kernel.org/linux-nfs/aDC-ftnzhJAlwqwh@kernel.org/ Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-06-19net: lan743x: fix potential out-of-bounds write in ↵Alexey Kodanev
lan743x_ptp_io_event_clock_get() Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8). This seems correct and aligns with the PTP interrupt status register (PTP_INT_STS) specifications. However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index: lan743x_ptp_io_event_clock_get(..., u8 channel,...) { ... /* Update Local timestamp */ extts = &ptp->extts[channel]; extts->ts.tv_sec = sec; ... } To avoid an out-of-bounds write and utilize all the supported GPIO inputs, set LAN743X_PTP_N_EXTTS to 8. Detected using the static analysis tool - Svace. Fixes: 60942c397af6 ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)") Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://patch.msgid.link/20250616113743.36284-1-aleksei.kodanev@bell-sw.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-19btrfs: zoned: fix alloc_offset calculation for partly conventional block groupsJohannes Thumshirn
When one of two zones composing a DUP block group is a conventional zone, we have the zone_info[i]->alloc_offset = WP_CONVENTIONAL. That will, of course, not match the write pointer of the other zone, and fails that block group. This commit solves that issue by properly recovering the emulated write pointer from the last allocated extent. The offset for the SINGLE, DUP, and RAID1 are straight-forward: it is same as the end of last allocated extent. The RAID0 and RAID10 are a bit tricky that we need to do the math of striping. This is the kernel equivalent of Naohiro's user-space commit: "btrfs-progs: zoned: fix alloc_offset calculation for partly conventional block groups". Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-06-19btrfs: handle csum tree error with rescue=ibadroots correctlyQu Wenruo
[BUG] There is syzbot based reproducer that can crash the kernel, with the following call trace: (With some debug output added) DEBUG: rescue=ibadroots parsed BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010) BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8 BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm BTRFS info (device loop0): using free-space-tree BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0 DEBUG: read tree root path failed for tree csum, ret=-5 BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0 BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0 process 'repro' launched './file2' with NULL argv: empty string added DEBUG: no csum root, idatacsums=0 ibadroots=134217728 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f] CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs] Call Trace: <TASK> btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs] btrfs_submit_bbio+0x43e/0x1a80 [btrfs] submit_one_bio+0xde/0x160 [btrfs] btrfs_readahead+0x498/0x6a0 [btrfs] read_pages+0x1c3/0xb20 page_cache_ra_order+0x4b5/0xc20 filemap_get_pages+0x2d3/0x19e0 filemap_read+0x314/0xde0 __kernel_read+0x35b/0x900 bprm_execve+0x62e/0x1140 do_execveat_common.isra.0+0x3fc/0x520 __x64_sys_execveat+0xdc/0x130 do_syscall_64+0x54/0x1d0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ---[ end trace 0000000000000000 ]--- [CAUSE] Firstly the fs has a corrupted csum tree root, thus to mount the fs we have to go "ro,rescue=ibadroots" mount option. Normally with that mount option, a bad csum tree root should set BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will ignore csum search. But in this particular case, we have the following call trace that caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS: load_global_roots_objectid(): ret = btrfs_search_slot(); /* Succeeded */ btrfs_item_key_to_cpu() found = true; /* We found the root item for csum tree. */ root = read_tree_root_path(); if (IS_ERR(root)) { if (!btrfs_test_opt(fs_info, IGNOREBADROOTS)) /* * Since we have rescue=ibadroots mount option, * @ret is still 0. */ break; if (!found || ret) { /* @found is true, @ret is 0, error handling for csum * tree is skipped. */ } This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if the csum tree is corrupted, which results unexpected later csum lookup. [FIX] If read_tree_root_path() failed, always populate @ret to the error number. As at the end of the function, we need @ret to determine if we need to do the extra error handling for csum tree. Fixes: abed4aaae4f7 ("btrfs: track the csum, extent, and free space trees in a rb tree") Reported-by: Zhiyu Zhang <zhiyuzhang999@gmail.com> Reported-by: Longxing Li <coregee2000@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-06-19btrfs: fix race between async reclaim worker and close_ctree()Filipe Manana
Syzbot reported an assertion failure due to an attempt to add a delayed iput after we have set BTRFS_FS_STATE_NO_DELAYED_IPUT in the fs_info state: WARNING: CPU: 0 PID: 65 at fs/btrfs/inode.c:3420 btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420 Modules linked in: CPU: 0 UID: 0 PID: 65 Comm: kworker/u8:4 Not tainted 6.15.0-next-20250530-syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Workqueue: btrfs-endio-write btrfs_work_helper RIP: 0010:btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420 Code: 4e ad 5d (...) RSP: 0018:ffffc9000213f780 EFLAGS: 00010293 RAX: ffffffff83c635b7 RBX: ffff888058920000 RCX: ffff88801c769e00 RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000000 RBP: 0000000000000001 R08: ffff888058921b67 R09: 1ffff1100b12436c R10: dffffc0000000000 R11: ffffed100b12436d R12: 0000000000000001 R13: dffffc0000000000 R14: ffff88807d748000 R15: 0000000000000100 FS: 0000000000000000(0000) GS:ffff888125c53000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00002000000bd038 CR3: 000000006a142000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btrfs_put_ordered_extent+0x19f/0x470 fs/btrfs/ordered-data.c:635 btrfs_finish_one_ordered+0x11d8/0x1b10 fs/btrfs/inode.c:3312 btrfs_work_helper+0x399/0xc20 fs/btrfs/async-thread.c:312 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> This can happen due to a race with the async reclaim worker like this: 1) The async metadata reclaim worker enters shrink_delalloc(), which calls btrfs_start_delalloc_roots() with an nr_pages argument that has a value less than LONG_MAX, and that in turn enters start_delalloc_inodes(), which sets the local variable 'full_flush' to false because wbc->nr_to_write is less than LONG_MAX; 2) There it finds inode X in a root's delalloc list, grabs a reference for inode X (with igrab()), and triggers writeback for it with filemap_fdatawrite_wbc(), which creates an ordered extent for inode X; 3) The unmount sequence starts from another task, we enter close_ctree() and we flush the workqueue fs_info->endio_write_workers, which waits for the ordered extent for inode X to complete and when dropping the last reference of the ordered extent, with btrfs_put_ordered_extent(), when we call btrfs_add_delayed_iput() we don't add the inode to the list of delayed iputs because it has a refcount of 2, so we decrement it to 1 and return; 4) Shortly after at close_ctree() we call btrfs_run_delayed_iputs() which runs all delayed iputs, and then we set BTRFS_FS_STATE_NO_DELAYED_IPUT in the fs_info state; 5) The async reclaim worker, after calling filemap_fdatawrite_wbc(), now calls btrfs_add_delayed_iput() for inode X and there we trigger an assertion failure since the fs_info state has the flag BTRFS_FS_STATE_NO_DELAYED_IPUT set. Fix this by setting BTRFS_FS_STATE_NO_DELAYED_IPUT only after we wait for the async reclaim workers to finish, after we call cancel_work_sync() for them at close_ctree(), and by running delayed iputs after wait for the reclaim workers to finish and before setting the bit. This race was recently introduced by commit 19e60b2a95f5 ("btrfs: add extra warning if delayed iput is added when it's not allowed"). Without the new validation at btrfs_add_delayed_iput(), this described scenario was safe because close_ctree() later calls btrfs_commit_super(). That will run any final delayed iputs added by reclaim workers in the window between the btrfs_run_delayed_iputs() and the the reclaim workers being shut down. Reported-by: syzbot+0ed30ad435bf6f5b7a42@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/6840481c.a00a0220.d4325.000c.GAE@google.com/T/#u Fixes: 19e60b2a95f5 ("btrfs: add extra warning if delayed iput is added when it's not allowed") Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-06-19btrfs: fix assertion when building free space treeFilipe Manana
When building the free space tree with the block group tree feature enabled, we can hit an assertion failure like this: BTRFS info (device loop0 state M): rebuilding free space tree assertion failed: ret == 0, in fs/btrfs/free-space-tree.c:1102 ------------[ cut here ]------------ kernel BUG at fs/btrfs/free-space-tree.c:1102! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Modules linked in: CPU: 1 UID: 0 PID: 6592 Comm: syz-executor322 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 lr : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 sp : ffff8000a4ce7600 x29: ffff8000a4ce76e0 x28: ffff0000c9bc6000 x27: ffff0000ddfff3d8 x26: ffff0000ddfff378 x25: dfff800000000000 x24: 0000000000000001 x23: ffff8000a4ce7660 x22: ffff70001499cecc x21: ffff0000e1d8c160 x20: ffff0000e1cb7800 x19: ffff0000e1d8c0b0 x18: 00000000ffffffff x17: ffff800092f39000 x16: ffff80008ad27e48 x15: ffff700011e740c0 x14: 1ffff00011e740c0 x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011e740c0 x10: 0000000000ff0100 x9 : 94ef24f55d2dbc00 x8 : 94ef24f55d2dbc00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a4ce6f98 x4 : ffff80008f415ba0 x3 : ffff800080548ef0 x2 : 0000000000000000 x1 : 0000000100000000 x0 : 000000000000003e Call trace: populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 (P) btrfs_rebuild_free_space_tree+0x14c/0x54c fs/btrfs/free-space-tree.c:1337 btrfs_start_pre_rw_mount+0xa78/0xe10 fs/btrfs/disk-io.c:3074 btrfs_remount_rw fs/btrfs/super.c:1319 [inline] btrfs_reconfigure+0x828/0x2418 fs/btrfs/super.c:1543 reconfigure_super+0x1d4/0x6f0 fs/super.c:1083 do_remount fs/namespace.c:3365 [inline] path_mount+0xb34/0xde0 fs/namespace.c:4200 do_mount fs/namespace.c:4221 [inline] __do_sys_mount fs/namespace.c:4432 [inline] __se_sys_mount fs/namespace.c:4409 [inline] __arm64_sys_mount+0x3e8/0x468 fs/namespace.c:4409 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Code: f0047182 91178042 528089c3 9771d47b (d4210000) ---[ end trace 0000000000000000 ]--- This happens because we are processing an empty block group, which has no extents allocated from it, there are no items for this block group, including the block group item since block group items are stored in a dedicated tree when using the block group tree feature. It also means this is the block group with the highest start offset, so there are no higher keys in the extent root, hence btrfs_search_slot_for_read() returns 1 (no higher key found). Fix this by asserting 'ret' is 0 only if the block group tree feature is not enabled, in which case we should find a block group item for the block group since it's stored in the extent root and block group item keys are greater than extent item keys (the value for BTRFS_BLOCK_GROUP_ITEM_KEY is 192 and for BTRFS_EXTENT_ITEM_KEY and BTRFS_METADATA_ITEM_KEY the values are 168 and 169 respectively). In case 'ret' is 1, we just need to add a record to the free space tree which spans the whole block group, and we can achieve this by making 'ret == 0' as the while loop's condition. Reported-by: syzbot+36fae25c35159a763a2a@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/6841dca8.a00a0220.d4325.0020.GAE@google.com/ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-06-19btrfs: don't silently ignore unexpected extent type when replaying logFilipe Manana
If there's an unexpected (invalid) extent type, we just silently ignore it. This means a corruption or some bug somewhere, so instead return -EUCLEAN to the caller, making log replay fail, and print an error message with relevant information. Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-06-19btrfs: fix invalid inode pointer dereferences during log replayFilipe Manana
In a few places where we call read_one_inode(), if we get a NULL pointer we end up jumping into an error path, or fallthrough in case of __add_inode_ref(), where we then do something like this: iput(&inode->vfs_inode); which results in an invalid inode pointer that triggers an invalid memory access, resulting in a crash. Fix this by making sure we don't do such dereferences. Fixes: b4c50cbb01a1 ("btrfs: return a btrfs_inode from read_one_inode()") CC: stable@vger.kernel.org # 6.15+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-06-19btrfs: fix double unlock of buffer_tree xarray when releasing subpage ebFilipe Manana
If we break out of the loop because an extent buffer doesn't have the bit EXTENT_BUFFER_TREE_REF set, we end up unlocking the xarray twice, once before we tested for the bit and break out of the loop, and once again after the loop. Fix this by testing the bit and exiting before unlocking the xarray. The time spent testing the bit is negligible and it's not worth trying to do that outside the critical section delimited by the xarray lock due to the code complexity required to avoid it (like using a local boolean variable to track whether the xarray is locked or not). The xarray unlock only needs to be done before calling release_extent_buffer(), as that needs to lock the xarray (through xa_cmpxchg_irq()) and does a more significant amount of work. Fixes: 19d7f65f032f ("btrfs: convert the buffer_radix to an xarray") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/linux-btrfs/aDRNDU0GM1_D4Xnw@stanley.mountain/ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-06-19btrfs: update superblock's device bytes_used when dropping chunkMark Harmstone
Each superblock contains a copy of the device item for that device. In a transaction which drops a chunk but doesn't create any new ones, we were correctly updating the device item in the chunk tree but not copying over the new bytes_used value to the superblock. This can be seen by doing the following: # dd if=/dev/zero of=test bs=4096 count=2621440 # mkfs.btrfs test # mount test /root/temp # cd /root/temp # for i in {00..10}; do dd if=/dev/zero of=$i bs=4096 count=32768; done # sync # rm * # sync # btrfs balance start -dusage=0 . # sync # cd # umount /root/temp # btrfs check test For btrfs-check to detect this, you will also need my patch at https://github.com/kdave/btrfs-progs/pull/991. Change btrfs_remove_dev_extents() so that it adds the devices to the fs_info->post_commit_list if they're not there already. This causes btrfs_commit_device_sizes() to be called, which updates the bytes_used value in the superblock. Fixes: bbbf7243d62d ("btrfs: combine device update operations during transaction commit") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Mark Harmstone <maharmstone@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-06-19btrfs: fix a race between renames and directory loggingFilipe Manana
We have a race between a rename and directory inode logging that if it happens and we crash/power fail before the rename completes, the next time the filesystem is mounted, the log replay code will end up deleting the file that was being renamed. This is best explained following a step by step analysis of an interleaving of steps that lead into this situation. Consider the initial conditions: 1) We are at transaction N; 2) We have directories A and B created in a past transaction (< N); 3) We have inode X corresponding to a file that has 2 hardlinks, one in directory A and the other in directory B, so we'll name them as "A/foo_link1" and "B/foo_link2". Both hard links were persisted in a past transaction (< N); 4) We have inode Y corresponding to a file that as a single hard link and is located in directory A, we'll name it as "A/bar". This file was also persisted in a past transaction (< N). The steps leading to a file loss are the following and for all of them we are under transaction N: 1) Link "A/foo_link1" is removed, so inode's X last_unlink_trans field is updated to N, through btrfs_unlink() -> btrfs_record_unlink_dir(); 2) Task A starts a rename for inode Y, with the goal of renaming from "A/bar" to "A/baz", so we enter btrfs_rename(); 3) Task A inserts the new BTRFS_INODE_REF_KEY for inode Y by calling btrfs_insert_inode_ref(); 4) Because the rename happens in the same directory, we don't set the last_unlink_trans field of directoty A's inode to the current transaction id, that is, we don't cal btrfs_record_unlink_dir(); 5) Task A then removes the entries from directory A (BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items) when calling __btrfs_unlink_inode() (actually the dir index item is added as a delayed item, but the effect is the same); 6) Now before task A adds the new entry "A/baz" to directory A by calling btrfs_add_link(), another task, task B is logging inode X; 7) Task B starts a fsync of inode X and after logging inode X, at btrfs_log_inode_parent() it calls btrfs_log_all_parents(), since inode X has a last_unlink_trans value of N, set at in step 1; 8) At btrfs_log_all_parents() we search for all parent directories of inode X using the commit root, so we find directories A and B and log them. Bu when logging direct A, we don't have a dir index item for inode Y anymore, neither the old name "A/bar" nor for the new name "A/baz" since the rename has deleted the old name but has not yet inserted the new name - task A hasn't called yet btrfs_add_link() to do that. Note that logging directory A doesn't fallback to a transaction commit because its last_unlink_trans has a lower value than the current transaction's id (see step 4); 9) Task B finishes logging directories A and B and gets back to btrfs_sync_file() where it calls btrfs_sync_log() to persist the log tree; 10) Task B successfully persisted the log tree, btrfs_sync_log() completed with success, and a power failure happened. We have a log tree without any directory entry for inode Y, so the log replay code deletes the entry for inode Y, name "A/bar", from the subvolume tree since it doesn't exist in the log tree and the log tree is authorative for its index (we logged a BTRFS_DIR_LOG_INDEX_KEY item that covers the index range for the dentry that corresponds to "A/bar"). Since there's no other hard link for inode Y and the log replay code deletes the name "A/bar", the file is lost. The issue wouldn't happen if task B synced the log only after task A called btrfs_log_new_name(), which would update the log with the new name for inode Y ("A/bar"). Fix this by pinning the log root during renames before removing the old directory entry, and unpinning after btrfs_log_new_name() is called. Fixes: 259c4b96d78d ("btrfs: stop doing unnecessary log updates during a rename") CC: stable@vger.kernel.org # 5.18+ Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-06-19btrfs: scrub: add prefix for the error messagesAnand Jain
Add a "scrub: " prefix to all messages logged by scrub so that it's easy to filter them from dmesg for analysis. Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-06-19btrfs: warn if leaking delayed_nodes in btrfs_put_root()Leo Martins
Add a warning for leaked delayed_nodes when putting a root. We currently do this for inodes, but not delayed_nodes. Signed-off-by: Leo Martins <loemra.dev@gmail.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> [ Remove the changelog from the commit message. ] Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-06-19btrfs: fix delayed ref refcount leak in debug assertionLeo Martins
If the delayed_root is not empty we are increasing the number of references to a delayed_node without decreasing it, causing a leak. Fix by decrementing the delayed_node reference count. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Leo Martins <loemra.dev@gmail.com> Reviewed-by: Qu Wenruo <wqu@suse.com> [ Remove the changelog from the commit message. ] Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-06-19btrfs: include root in error message when unlinking inodeFilipe Manana
To help debugging include the root number in the error message, and since this is a critical error that implies a metadata inconsistency and results in a transaction abort change the log message level from "info" to "critical", which is a much better fit. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-06-19KVM: arm64: VHE: Centralize ISBs when returning to hostMark Rutland
The VHE hyp code has recently gained a few ISBs. Simplify this to one unconditional ISB in __kvm_vcpu_run_vhe(), and remove the unnecessary ISB from the kvm_call_hyp_ret() macro. While kvm_call_hyp_ret() is also used to invoke __vgic_v3_get_gic_config(), but no ISB is necessary in that case either. For the moment, an ISB is left in kvm_call_hyp(), as there are many more users, and removing the ISB would require a more thorough audit. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20250617133718.4014181-8-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-06-19KVM: arm64: Remove cpacr_clear_set()Mark Rutland
We no longer use cpacr_clear_set(). Remove cpacr_clear_set() and its helper functions. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20250617133718.4014181-7-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-06-19KVM: arm64: Remove ad-hoc CPTR manipulation from kvm_hyp_handle_fpsimd()Mark Rutland
The hyp code FPSIMD/SVE/SME trap handling logic has some rather messy open-coded manipulation of CPTR/CPACR. This is benign for non-nested guests, but broken for nested guests, as the guest hypervisor's CPTR configuration is not taken into account. Consider the case where L0 provides FPSIMD+SVE to an L1 guest hypervisor, and the L1 guest hypervisor only provides FPSIMD to an L2 guest (with L1 configuring CPTR/CPACR to trap SVE usage from L2). If the L2 guest triggers an FPSIMD trap to the L0 hypervisor, kvm_hyp_handle_fpsimd() will see that the vCPU supports FPSIMD+SVE, and will configure CPTR/CPACR to NOT trap FPSIMD+SVE before returning to the L2 guest. Consequently the L2 guest would be able to manipulate SVE state even though the L1 hypervisor had configured CPTR/CPACR to forbid this. Clean this up, and fix the nested virt issue by always using __deactivate_cptr_traps() and __activate_cptr_traps() to manage the CPTR traps. This removes the need for the ad-hoc fixup in kvm_hyp_save_fpsimd_host(), and ensures that any guest hypervisor configuration of CPTR/CPACR is taken into account. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20250617133718.4014181-6-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-06-19KVM: arm64: Remove ad-hoc CPTR manipulation from fpsimd_sve_sync()Mark Rutland
There's no need for fpsimd_sve_sync() to write to CPTR/CPACR. All relevant traps are always disabled earlier within __kvm_vcpu_run(), when __deactivate_cptr_traps() configures CPTR/CPACR. With irrelevant details elided, the flow is: handle___kvm_vcpu_run(...) { flush_hyp_vcpu(...) { fpsimd_sve_flush(...); } __kvm_vcpu_run(...) { __activate_traps(...) { __activate_cptr_traps(...); } do { __guest_enter(...); } while (...); __deactivate_traps(....) { __deactivate_cptr_traps(...); } } sync_hyp_vcpu(...) { fpsimd_sve_sync(...); } } Remove the unnecessary write to CPTR/CPACR. An ISB is still necessary, so a comment is added to describe this requirement. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20250617133718.4014181-5-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-06-19KVM: arm64: Reorganise CPTR trap manipulationMark Rutland
The NVHE/HVHE and VHE modes have separate implementations of __activate_cptr_traps() and __deactivate_cptr_traps() in their respective switch.c files. There's some duplication of logic, and it's not currently possible to reuse this logic elsewhere. Move the logic into the common switch.h header so that it can be reused, and de-duplicate the common logic. This rework changes the way SVE traps are deactivated in VHE mode, aligning it with NVHE/HVHE modes: * Before this patch, VHE's __deactivate_cptr_traps() would unconditionally enable SVE for host EL2 (but not EL0), regardless of whether the ARM64_SVE cpucap was set. * After this patch, VHE's __deactivate_cptr_traps() will take the ARM64_SVE cpucap into account. When ARM64_SVE is not set, SVE will be trapped from EL2 and below. The old and new behaviour are both benign: * When ARM64_SVE is not set, the host will not touch SVE state, and will not reconfigure SVE traps. Host EL0 access to SVE will be trapped as expected. * When ARM64_SVE is set, the host will configure EL0 SVE traps before returning to EL0 as part of reloading the EL0 FPSIMD/SVE/SME state. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20250617133718.4014181-4-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-06-19KVM: arm64: VHE: Synchronize CPTR trap deactivationMark Rutland
Currently there is no ISB between __deactivate_cptr_traps() disabling traps that affect EL2 and fpsimd_lazy_switch_to_host() manipulating registers potentially affected by CPTR traps. When NV is not in use, this is safe because the relevant registers are only accessed when guest_owns_fp_regs() && vcpu_has_sve(vcpu), and this also implies that SVE traps affecting EL2 have been deactivated prior to __guest_entry(). When NV is in use, a guest hypervisor may have configured SVE traps for a nested context, and so it is necessary to have an ISB between __deactivate_cptr_traps() and fpsimd_lazy_switch_to_host(). Due to the current lack of an ISB, when a guest hypervisor enables SVE traps in CPTR, the host can take an unexpected SVE trap from within fpsimd_lazy_switch_to_host(), e.g. | Unhandled 64-bit el1h sync exception on CPU1, ESR 0x0000000066000000 -- SVE | CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT | Hardware name: FVP Base RevC (DT) | pstate: 604023c9 (nZCv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __kvm_vcpu_run+0x6f4/0x844 | lr : __kvm_vcpu_run+0x150/0x844 | sp : ffff800083903a60 | x29: ffff800083903a90 x28: ffff000801f4a300 x27: 0000000000000000 | x26: 0000000000000000 x25: ffff000801f90000 x24: ffff000801f900f0 | x23: ffff800081ff7720 x22: 0002433c807d623f x21: ffff000801f90000 | x20: ffff00087f730730 x19: 0000000000000000 x18: 0000000000000000 | x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 | x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 | x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff000801f90d70 | x5 : 0000000000001000 x4 : ffff8007fd739000 x3 : ffff000801f90000 | x2 : 0000000000000000 x1 : 00000000000003cc x0 : ffff800082f9d000 | Kernel panic - not syncing: Unhandled exception | CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT | Hardware name: FVP Base RevC (DT) | Call trace: | show_stack+0x18/0x24 (C) | dump_stack_lvl+0x60/0x80 | dump_stack+0x18/0x24 | panic+0x168/0x360 | __panic_unhandled+0x68/0x74 | el1h_64_irq_handler+0x0/0x24 | el1h_64_sync+0x6c/0x70 | __kvm_vcpu_run+0x6f4/0x844 (P) | kvm_arm_vcpu_enter_exit+0x64/0xa0 | kvm_arch_vcpu_ioctl_run+0x21c/0x870 | kvm_vcpu_ioctl+0x1a8/0x9d0 | __arm64_sys_ioctl+0xb4/0xf4 | invoke_syscall+0x48/0x104 | el0_svc_common.constprop.0+0x40/0xe0 | do_el0_svc+0x1c/0x28 | el0_svc+0x30/0xcc | el0t_64_sync_handler+0x10c/0x138 | el0t_64_sync+0x198/0x19c | SMP: stopping secondary CPUs | Kernel Offset: disabled | CPU features: 0x0000,000002c0,02df4fb9,97ee773f | Memory Limit: none | ---[ end Kernel panic - not syncing: Unhandled exception ]--- Fix this by adding an ISB between __deactivate_traps() and fpsimd_lazy_switch_to_host(). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20250617133718.4014181-3-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-06-19KVM: arm64: VHE: Synchronize restore of host debug registersMark Rutland
When KVM runs in non-protected VHE mode, there's no context synchronization event between __debug_switch_to_host() restoring the host debug registers and __kvm_vcpu_run() unmasking debug exceptions. Due to this, it's theoretically possible for the host to take an unexpected debug exception due to the stale guest configuration. This cannot happen in NVHE/HVHE mode as debug exceptions are masked in the hyp code, and the exception return to the host will provide the necessary context synchronization before debug exceptions can be taken. For now, avoid the problem by adding an ISB after VHE hyp code restores the host debug registers. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250617133718.4014181-2-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-06-19serial: core: restore of_node information in sysfsAidan Stewart
Since in v6.8-rc1, the of_node symlink under tty devices is missing. This breaks any udev rules relying on this information. Link the of_node information in the serial controller device with the parent defined in the device tree. This will also apply to the serial device which takes the serial controller as a parent device. Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") Cc: stable@vger.kernel.org Signed-off-by: Aidan Stewart <astewart@tektelic.com> Link: https://lore.kernel.org/r/20250617164819.13912-1-astewart@tektelic.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19vt: fix kernel-doc warnings in ucs_get_fallback()Randy Dunlap
Use the correct function parameter name in ucs_get_fallback() to prevent kernel-doc warnings: Warning: drivers/tty/vt/ucs.c:218 function parameter 'cp' not described in 'ucs_get_fallback' Warning: drivers/tty/vt/ucs.c:218 Excess function parameter 'base' description in 'ucs_get_fallback' Fixes: fe26933cf1e1 ("vt: add ucs_get_fallback()") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Nicolas Pitre <npitre@baylibre.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: linux-serial@vger.kernel.org Reviewed-by: Nicolas Pitre <npitre@baylibre.com>. Link: https://lore.kernel.org/r/20250611020229.2650595-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19vt: add missing notification when switching back to text modeNicolas Pitre
Programs using poll() on /dev/vcsa to be notified when VT changes occur were missing one case: the switch from gfx to text mode. Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Link: https://lore.kernel.org/r/9o5ro928-0pp4-05rq-70p4-ro385n21n723@onlyvoer.pbz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19mtk-sd: Prevent memory corruption from DMA map failureMasami Hiramatsu (Google)
If msdc_prepare_data() fails to map the DMA region, the request is not prepared for data receiving, but msdc_start_data() proceeds the DMA with previous setting. Since this will lead a memory corruption, we have to stop the request operation soon after the msdc_prepare_data() fails to prepare it. Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: 208489032bdd ("mmc: mediatek: Add Mediatek MMC driver") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/174972756982.3337526.6755001617701603082.stgit@mhiramat.tok.corp.google.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-06-19Revert "usb: xhci: Implement xhci_handshake_check_state() helper"Roy Luo
This reverts commit 6ccb83d6c4972ebe6ae49de5eba051de3638362c. Commit 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state() helper") was introduced to workaround watchdog timeout issues on some platforms, allowing xhci_reset() to bail out early without waiting for the reset to complete. Skipping the xhci handshake during a reset is a dangerous move. The xhci specification explicitly states that certain registers cannot be accessed during reset in section 5.4.1 USB Command Register (USBCMD), Host Controller Reset (HCRST) field: "This bit is cleared to '0' by the Host Controller when the reset process is complete. Software cannot terminate the reset process early by writinga '0' to this bit and shall not write any xHC Operational or Runtime registers until while HCRST is '1'." This behavior causes a regression on SNPS DWC3 USB controller with dual-role capability. When the DWC3 controller exits host mode and removes xhci while a reset is still in progress, and then tries to configure its hardware for device mode, the ongoing reset leads to register access issues; specifically, all register reads returns 0. These issues extend beyond the xhci register space (which is expected during a reset) and affect the entire DWC3 IP block, causing the DWC3 device mode to malfunction. Cc: stable <stable@kernel.org> Fixes: 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state() helper") Signed-off-by: Roy Luo <royluo@google.com> Link: https://lore.kernel.org/r/20250522190912.457583-3-royluo@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19usb: xhci: Skip xhci_reset in xhci_resume if xhci is being removedRoy Luo
xhci_reset() currently returns -ENODEV if XHCI_STATE_REMOVING is set, without completing the xhci handshake, unless the reset completes exceptionally quickly. This behavior causes a regression on Synopsys DWC3 USB controllers with dual-role capabilities. Specifically, when a DWC3 controller exits host mode and removes xhci while a reset is still in progress, and then attempts to configure its hardware for device mode, the ongoing, incomplete reset leads to critical register access issues. All register reads return zero, not just within the xHCI register space (which might be expected during a reset), but across the entire DWC3 IP block. This patch addresses the issue by preventing xhci_reset() from being called in xhci_resume() and bailing out early in the reinit flow when XHCI_STATE_REMOVING is set. Cc: stable <stable@kernel.org> Fixes: 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state() helper") Suggested-by: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by: Roy Luo <royluo@google.com> Link: https://lore.kernel.org/r/20250522190912.457583-2-royluo@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19usb: gadget: u_serial: Fix race condition in TTY wakeupKuen-Han Tsai
A race condition occurs when gs_start_io() calls either gs_start_rx() or gs_start_tx(), as those functions briefly drop the port_lock for usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear port.tty and port_usb, respectively. Use the null-safe TTY Port helper function to wake up TTY. Example CPU1: CPU2: gserial_connect() // lock gs_close() // await lock gs_start_rx() // unlock usb_ep_queue() gs_close() // lock, reset port.tty and unlock gs_start_rx() // lock tty_wakeup() // NPE Fixes: 35f95fd7f234 ("TTY: usb/u_serial, use tty from tty_port") Cc: stable <stable@kernel.org> Signed-off-by: Kuen-Han Tsai <khtsai@google.com> Reviewed-by: Prashanth K <prashanth.k@oss.qualcomm.com> Link: https://lore.kernel.org/linux-usb/20240116141801.396398-1-khtsai@google.com/ Link: https://lore.kernel.org/r/20250617050844.1848232-2-khtsai@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19Revert "usb: gadget: u_serial: Add null pointer check in gs_start_io"Kuen-Han Tsai
This reverts commit ffd603f214237e250271162a5b325c6199a65382. Commit ffd603f21423 ("usb: gadget: u_serial: Add null pointer check in gs_start_io") adds null pointer checks at the beginning of the gs_start_io() function to prevent a null pointer dereference. However, these checks are redundant because the function's comment already requires callers to hold the port_lock and ensure port.tty and port_usb are not null. All existing callers already follow these rules. The true cause of the null pointer dereference is a race condition. When gs_start_io() calls either gs_start_rx() or gs_start_tx(), the port_lock is temporarily released for usb_ep_queue(). This allows port.tty and port_usb to be cleared. Fixes: ffd603f21423 ("usb: gadget: u_serial: Add null pointer check in gs_start_io") Cc: stable <stable@kernel.org> Signed-off-by: Kuen-Han Tsai <khtsai@google.com> Reviewed-by: Prashanth K <prashanth.k@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250617050844.1848232-1-khtsai@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19usb: chipidea: udc: disconnect/reconnect from host when do suspend/resumeXu Yang
Shawn and John reported a hang issue during system suspend as below: - USB gadget is enabled as Ethernet - There is data transfer over USB Ethernet (scp a big file between host and device) - Device is going in/out suspend (echo mem > /sys/power/state) The root cause is the USB device controller is suspended but the USB bus is still active which caused the USB host continues to transfer data with device and the device continues to queue USB requests (in this case, a delayed TCP ACK packet trigger the issue) after controller is suspended, however the USB controller clock is already gated off. Then if udc driver access registers after that point, the system will hang. The correct way to avoid such issue is to disconnect device from host when the USB bus is not at suspend state. Then the host will receive disconnect event and stop data transfer in time. To continue make USB gadget device work after system resume, this will reconnect device automatically. To make usb wakeup work if USB bus is already at suspend state, this will keep connection for it only when USB device controller has enabled wakeup capability. Reported-by: Shawn Guo <shawnguo@kernel.org> Reported-by: John Ernberg <john.ernberg@actia.se> Closes: https://lore.kernel.org/linux-usb/aEZxmlHmjeWcXiF3@dragon/ Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP Fixes: 235ffc17d014 ("usb: chipidea: udc: add suspend/resume support for device controller") Cc: stable <stable@kernel.org> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20250614124914.207540-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19usb: acpi: fix device link removalHeikki Krogerus
The device link to the USB4 host interface has to be removed manually since it's no longer auto removed. Fixes: 623dae3e7084 ("usb: acpi: fix boot hang due to early incorrect 'tunneled' USB3 device links") Cc: stable <stable@kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20250611111415.2707865-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19usb: hub: fix detection of high tier USB3 devices behind suspended hubsMathias Nyman
USB3 devices connected behind several external suspended hubs may not be detected when plugged in due to aggressive hub runtime pm suspend. The hub driver immediately runtime-suspends hubs if there are no active children or port activity. There is a delay between the wake signal causing hub resume, and driver visible port activity on the hub downstream facing ports. Most of the LFPS handshake, resume signaling and link training done on the downstream ports is not visible to the hub driver until completed, when device then will appear fully enabled and running on the port. This delay between wake signal and detectable port change is even more significant with chained suspended hubs where the wake signal will propagate upstream first. Suspended hubs will only start resuming downstream ports after upstream facing port resumes. The hub driver may resume a USB3 hub, read status of all ports, not yet see any activity, and runtime suspend back the hub before any port activity is visible. This exact case was seen when conncting USB3 devices to a suspended Thunderbolt dock. USB3 specification defines a 100ms tU3WakeupRetryDelay, indicating USB3 devices expect to be resumed within 100ms after signaling wake. if not then device will resend the wake signal. Give the USB3 hubs twice this time (200ms) to detect any port changes after resume, before allowing hub to runtime suspend again. Cc: stable <stable@kernel.org> Fixes: 2839f5bcfcfc ("USB: Turn on auto-suspend for USB 3.0 hubs.") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250611112441.2267883-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19Logitech C-270 even more brokenOliver Neukum
Some varieties of this device don't work with RESET_RESUME alone. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250605122852.1440382-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19usb: dwc3: Abort suspend on soft disconnect failureKuen-Han Tsai
When dwc3_gadget_soft_disconnect() fails, dwc3_suspend_common() keeps going with the suspend, resulting in a period where the power domain is off, but the gadget driver remains connected. Within this time frame, invoking vbus_event_work() will cause an error as it attempts to access DWC3 registers for endpoint disabling after the power domain has been completely shut down. Abort the suspend sequence when dwc3_gadget_suspend() cannot halt the controller and proceeds with a soft connect. Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume") Cc: stable <stable@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Kuen-Han Tsai <khtsai@google.com> Link: https://lore.kernel.org/r/20250528100315.2162699-1-khtsai@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19usb: cdnsp: do not disable slot for disabled slotPeter Chen
It doesn't need to do it, and the related command event returns 'Slot Not Enabled Error' status. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable <stable@kernel.org> Suggested-by: Hongliang Yang <hongliang.yang@cixtech.com> Reviewed-by: Fugang Duan <fugang.duan@cixtech.com> Signed-off-by: Peter Chen <peter.chen@cixtech.com> Link: https://lore.kernel.org/r/20250619013413.35817-1-peter.chen@cixtech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19eth: fbnic: avoid double free when failing to DMA-map FW msgJakub Kicinski
The semantics are that caller of fbnic_mbx_map_msg() retains the ownership of the message on error. All existing callers dutifully free the page. Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism") Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250616195510.225819-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-19mfd: Fix building without CONFIG_OFArnd Bergmann
Using the of_fwnode_handle() means that local 'node' variables are unused whenever CONFIG_OF is disabled for compile testing: drivers/mfd/88pm860x-core.c: In function 'device_irq_init': drivers/mfd/88pm860x-core.c:576:29: error: unused variable 'node' [-Werror=unused-variable] 576 | struct device_node *node = i2c->dev.of_node; | ^~~~ drivers/mfd/max8925-core.c: In function 'max8925_irq_init': drivers/mfd/max8925-core.c:659:29: error: unused variable 'node' [-Werror=unused-variable] 659 | struct device_node *node = chip->dev->of_node; | ^~~~ drivers/mfd/twl4030-irq.c: In function 'twl4030_init_irq': drivers/mfd/twl4030-irq.c:679:46: error: unused variable 'node' [-Werror=unused-variable] 679 | struct device_node *node = dev->of_node; | ^~~~ Replace these with the corresponding dev_fwnode() lookups that keep the code simpler in addition to avoiding the warnings. Fixes: e3d44f11da04 ("mfd: Switch to irq_domain_create_*()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250520154106.2019525-1-arnd@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2025-06-19KVM: arm64: selftests: Close the GIC FD in arch_timer_edge_casesZenghui Yu
Close the GIC FD to free the reference it holds to the VM so that we can correctly clean up the VM. This also gets rid of the "KVM: debugfs: duplicate directory 395722-4" warning when running arch_timer_edge_cases. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Miguel Luis <miguel.luis@oracle.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Link: https://lore.kernel.org/r/20250608095402.1131-1-yuzenghui@huawei.com Signed-off-by: Marc Zyngier <maz@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-27 19:44:28 +0000