summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-07-22Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge cpufreq updates for 6.17-rc1: - Fix two initialization ordering issues in the cpufreq core and a governor initialization error path in it, and clean it up (Lifeng Zheng) - Add Granite Rapids support in no-HWP mode to the intel_pstate cpufreq driver (Li RongQing) - Make intel_pstate always use HWP_DESIRED_PERF in passive mode (Rafael Wysocki) - Allow building the tegra124 cpufreq driver as a module (Aaron Kling) - Do minor cleanups for Rust cpufreq and cpumask APIs and fix MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas Bulwahn) - Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter, Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng) - Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver (Prashant Malani) - Fix minimum performance state label error in the amd-pstate driver documentation (Shouye Liu) - Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq governor and explain HW coordination influence on it in the documentation (Shashank Balaji) * pm-cpufreq: (27 commits) cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag Documentation: amd-pstate:fix minimum performance state label error drivers: cpufreq: add Tegra114 support rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs cpufreq: Exit governor when failed to start old governor cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq() cpufreq: Init policy->rwsem before it may be possibly used cpufreq: Initialize cpufreq-based frequency-invariance later cpufreq: Remove duplicate check in __cpufreq_offline() cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode cpufreq: tegra124: Allow building as a module cpufreq: dt: Add register helper cpufreq: Export disable_cpufreq() cpufreq: armada-8k: Fix off by one in armada_8k_cpufreq_free_table() cpufreq: armada-8k: make both cpu masks static rust: cpufreq: use c_ types from kernel prelude rust: cpufreq: Ensure C ABI compatibility in all unsafe cpufreq: brcmstb-avs: Fully open-code compatible for grepping ...
2025-07-22remoteproc: xlnx: Fix kernel-doc warningsTanmay Shah
Fix kernel-doc warnings generated by following command: `scripts/kernel-doc -Werror -Wshort-desc -Wall \ drivers/remoteproc/xlnx_r5_remoteproc.c > /dev/null` warning: missing initial short description on line: * struct mbox_info ... Total 8 warnings fixed Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> Link: https://lore.kernel.org/r/20250716213048.2316424-3-tanmay.shah@amd.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2025-07-22Merge branch 'acpi-misc'Rafael J. Wysocki
Merge an update fixing typos in ACPI documentation and comments for 6.17-rc1 (Bjorn Helgaas). * acpi-misc: ACPI: Fix typos
2025-07-22um: Replace __ASSEMBLY__ with __ASSEMBLER__ in the usermode headersThomas Huth
While the GCC and Clang compilers already define __ASSEMBLER__ automatically when compiling assembly code, __ASSEMBLY__ is a macro that only gets defined by the Makefiles in the kernel. This can be very confusing when switching between userspace and kernelspace coding, so let's standardize on the __ASSEMBLER__ macro that is provided by the compilers now. This is a completely mechanical patch (done with a simple "sed -i" statement). Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-um@lists.infradead.org Signed-off-by: Thomas Huth <thuth@redhat.com> Link: https://patch.msgid.link/20250314071013.1575167-36-thuth@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-22ACPI: Fix typosBjorn Helgaas
Fix typos in documentation and comments. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250722132653.GA2781885@bhelgaas Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-07-22Merge tag 'mtk-arm32-for-v6.17' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/arm MediaTek mach ARM32 updates This adds support for the MediaTek MT6572 SoC, found in various old smartphones and tablets from various manufacturers. In particular, this adds a board_dt_compat entry for this SoC and its SMP bring up sequence to enable secondary cores. * tag 'mtk-arm32-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: ARM: mediatek: add MT6572 smp bring up code ARM: mediatek: add board_dt_compat entry for the MT6572 SoC Link: https://lore.kernel.org/r/20250711083656.33538-1-angelogioacchino.delregno@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-07-22ARM: sa110/gpio: convert set_multiple() to returning an integerBartosz Golaszewski
The conversion to using the new GPIO line setter callbacks missed the set_multiple() in this file. Convert it to using the new callback. Fixes: 9c3782118a57 ("ARM: sa1100/gpio: use new line value setter callbacks") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-07-22drm/bridge: ti-sn65dsi86: Remove extra semicolon in ti_sn_bridge_probe()Douglas Anderson
As reported by the kernel test robot, a recent patch introduced an unnecessary semicolon. Remove it. Fixes: 55e8ff842051 ("drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506301704.0SBj6ply-lkp@intel.com/ Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250714130631.1.I1cfae3222e344a3b3c770d079ee6b6f7f3b5d636@changeid
2025-07-22platform/x86: oxpec: Add support for OneXPlayer X1 Mini Pro (Strix Point)Antheas Kapenekakis
The OneXPlayer X1 Mini Pro (which is the Strix Point variant of the Mini) uses the same registers as the X1 Mini, so re-use the quirk. Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://lore.kernel.org/r/20250718163305.159232-2-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86: oxpec: Fix turbo register for G1 AMDAntheas Kapenekakis
Turns out that the AMD variant of the G1 uses different EC registers than the Intel variant. Differentiate them and apply the correct ones to the AMD variant. Fixes: b369395c895b ("platform/x86: oxpec: Add support for the OneXPlayer G1") Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://lore.kernel.org/r/20250718163305.159232-1-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22USB: serial: option: add Foxconn T99W709Slark Xiao
T99W709 is designed based on MTK T300(5G redcap) chip. There are 7 serial ports to be enumerated: AP_LOG, GNSS, AP_META, AT, MD_META, NPT, DBG. RSVD(5) for ADB port. test evidence as below: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e15f Rev=00.01 S: Manufacturer=MediaTek Inc. S: Product=USB DATA CARD S: SerialNumber=355511220000399 C: #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs I: If#=0x6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-07-22platform/x86/intel/pmt: support BMG crashlogMichael J. Ruhl
The Battlemage GPU has the type 1 version 2 crashlog feature. Update the crashlog driver to support this crashlog version. Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-14-michael.j.ruhl@intel.com [ij: make crashlog_type1_ver2 static] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86/intel/pmt: use a version structMichael J. Ruhl
In preparation for supporting multiple crashlog versions, use a struct to keep bit offset info for the status and control bits. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-13-michael.j.ruhl@intel.com [ij: move crashlog_type1_ver0 to its final place & add consts to crashlog_info] Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86/intel/pmt: refactor base parameterMichael J. Ruhl
To support an upcoming crashlog change, use the parent of struct intel_pmt_entry, struct crashlog_entry, as a main parameter. Using struct crashlog_entry will allow for a more flexible interface to control the crashlog feature. - Refactor to use struct crashlog_entry in place of struct intel_pmt_entry - Rename variables from "entry" to "crashlog" Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-12-michael.j.ruhl@intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86/intel/pmt: add register access helpersMichael J. Ruhl
The control register is used in a read/modify/write pattern. The status register is used in a read/check bit pattern. Add helpers to eliminate common code. Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-11-michael.j.ruhl@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86/intel/pmt: decouple sysfs and namespaceMichael J. Ruhl
The PMT namespace includes the crashlog sysfs attribute information. Other crashlog version/types may need different sysfs attributes. Coupling the attributes with the namespace blocks this usage. Decouple sysfs attributes from the name space and add them to the specific entry. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-10-michael.j.ruhl@intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86/intel/pmt: correct typesMichael J. Ruhl
A couple of local variables do not match the return types of some of the functions. Update the mismatched types to match. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-9-michael.j.ruhl@intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86/intel/pmt: re-order trigger logicMichael J. Ruhl
Setting the clear bit or checking the complete bit before checking to see if crashlog is disabled seems incorrect. Check disable before accessing any other bits. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-8-michael.j.ruhl@intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86/intel/pmt: use guard(mutex)Michael J. Ruhl
Update the mutex paths to use the new guard() mechanism. With the removal of goto, do some minor cleanup of the current logic path. Reviewed-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-7-michael.j.ruhl@intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86/intel/pmt: mutex clean upMichael J. Ruhl
The header file for mutex usage and mutex_destroy() cleanup code is absent from the crashlog.c module. Add the header file and mutex_destroy(). Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-6-michael.j.ruhl@intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86/intel/pmt: white space cleanupMichael J. Ruhl
Noticed two white space issues; cleaned them. Reviewed-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-5-michael.j.ruhl@intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22drm/xe: Correct BMG VSEC header sizingMichael J. Ruhl
The intel_vsec_header information for the crashlog feature is incorrect. Update the VSEC header with correct sizing and count. Since the crashlog entries are "merged" (num_entries = 2), the separate capabilities entries must be merged as well. Fixes: 0c45e76fcc62 ("drm/xe/vsec: Support BMG devices") Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-4-michael.j.ruhl@intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22drm/xe: Correct the rev value for the DVSEC entriesMichael J. Ruhl
By definition, the Designated Vendor Specific Extended Capability (DVSEC) revision should be 1. Add the rev value to be correct. Fixes: 0c45e76fcc62 ("drm/xe/vsec: Support BMG devices") Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-3-michael.j.ruhl@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86/intel/pmt: fix a crashlog NULL pointer accessMichael J. Ruhl
Usage of the intel_pmt_read() for binary sysfs, requires a pcidev. The current use of the endpoint value is only valid for telemetry endpoint usage. Without the ep, the crashlog usage causes the following NULL pointer exception: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:intel_pmt_read+0x3b/0x70 [pmt_class] Code: Call Trace: <TASK> ? sysfs_kf_bin_read+0xc0/0xe0 kernfs_fop_read_iter+0xac/0x1a0 vfs_read+0x26d/0x350 ksys_read+0x6b/0xe0 __x64_sys_read+0x1d/0x30 x64_sys_call+0x1bc8/0x1d70 do_syscall_64+0x6d/0x110 Augment struct intel_pmt_entry with a pointer to the pcidev to avoid the NULL pointer exception. Fixes: 045a513040cc ("platform/x86/intel/pmt: Use PMT callbacks") Cc: stable@vger.kernel.org Reviewed-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-2-michael.j.ruhl@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86: samsung-laptop: Expose charge_typesJelle van der Waa
Support the newly introduced charge_types sysfs attribute as a replacement for the custom `battery_life_extender` attribute. Setting charge_types to `Long Life` enables battery life extending mode. This change is similar to the recent Ideapad patch adding support for charge_types. Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com> Link: https://lore.kernel.org/r/20250702182844.107706-1-jvanderwaa@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22ASoC: SDCA: Fix implicit cast from le16Charles Keepax
As the HID wDescriptorLength is explicitly marked as little endian it should be converted to host endian before being used. Fixes: ac558015dfd8 ("ASoC: SDCA: add a HID device for HIDE entity") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507221024.M18hWD6q-lkp@intel.com/ Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250722114705.2816910-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-22remoteproc: xlnx: Disable unsupported featuresTanmay Shah
AMD-Xilinx platform driver does not support iommu or recovery mechanism yet. Disable both features in platform driver. Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> Link: https://lore.kernel.org/r/20250716213048.2316424-2-tanmay.shah@amd.com Fixes: 6b291e8020a8 ("drivers: remoteproc: Add Xilinx r5 remoteproc driver") Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2025-07-22Merge branches 'acpi-debug' and 'acpi-docs'Rafael J. Wysocki
Merge an update related to ACPI debugging and ACPI documentation updates for 6.17-rc1: - Enable CONFIG_ACPI_DEBUG by default to make it easier to get ACPI debug messages from OEM platforms (Mario Limonciello) - Fix parent device references in ASL examples in the ACPI documentation and fix spelling and style in the gpio-properties documentation in firmware-guide (Andy Shevchenko) * acpi-debug: ACPI: Enable CONFIG_ACPI_DEBUG by default * acpi-docs: Documentation: ACPI: Fix parent device references Documentation: firmware-guide: gpio-properties: Spelling and style fixes
2025-07-22Merge branches 'acpi-soc', 'acpi-fan', 'acpi-dptf', 'acpi-pfrut', 'acpi-prm' ↵Rafael J. Wysocki
and 'acpi-tad' Merge updates of assorted ACPI drivers for 6.17-rc1: - Remove an AudioDSP-related ID from the ACPI LPSS driver (Andy Shevchenko) - Replace sprintf()/scnprintf() with sysfs_emit() in the ACPI fan driver and update a debug message in fan_get_state_acpi4() (Eslam Khafagy, Abdelrahman Fekry, Sumeet Pawnikar) - Add Intel Wildcat Lake support to the ACPI DPTF driver (Srinivas Pandruvada) - Add more debug information regarding failing firmware updates to the ACPI pfr_update driver (Chen Yu) - Reduce the verbosity of the ACPI PRM (platform runtime mechanism) driver to avoid user confusion (Zhu Qiyu) - Replace sprintf() with sysfs_emit() in the ACPI TAD (time and alarm device) driver (Sukrut Heroorkar) * acpi-soc: ACPI: LPSS: Remove AudioDSP related ID * acpi-fan: ACPI: fan: Update debug message in fan_get_state_acpi4() ACPI: fan: Replace sprintf() with sysfs_emit() ACPI: fan: Replace sprintf()/scnprintf() with sysfs_emit() in show() functions * acpi-dptf: ACPI: DPTF: Support for Wildcat Lake * acpi-pfrut: ACPI: pfr_update: Add more debug information when firmware update failed * acpi-prm: ACPI: PRM: Reduce unnecessary printing to avoid user confusion * acpi-tad: ACPI: TAD: Replace sprintf() with sysfs_emit()
2025-07-22Merge branch 'acpi-apei'Rafael J. Wysocki
Merge ACPI APEI updates for 6.17-rc1: - Fix iomem-related sparse warnings in the APEI EINJ driver (Zaid Alali, Tony Luck) - Add EINJv2 error injection support to the APEI EINJ driver (Zaid Alali) - Fix memory corruption in error_type_set() in the APEI EINJ driver (Dan Carpenter) - Fix less than zero comparison on a size_t variable in the APEI EINJ driver (Colin Ian King) - Fix check and iounmap of an uninitialized pointer in the APEI EINJ driver (Colin Ian King) - Add TAINT_MACHINE_CHECK to the GHES panic path in APEI to improve diagnostics and post-mortem analysis (Breno Leitao) - Update APEI reviewer records in MAINTAINERS (Rafael Wysocki) - Fix the handling of synchronous uncorrected memory errors in APEI (Shuai Xue) * acpi-apei: ACPI: APEI: handle synchronous exceptions in task work ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered ACPI: APEI: MAINTAINERS: Update reviewers for APEI ACPI: APEI: EINJ: Fix trigger actions ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path ACPI: APEI: EINJ: Fix check and iounmap of uninitialized pointer p ACPI: APEI: EINJ: Fix less than zero comparison on a size_t variable ACPI: APEI: EINJ: prevent memory corruption in error_type_set() ACPI: APEI: EINJ: Update the documentation for EINJv2 support ACPI: APEI: EINJ: Enable EINJv2 error injections ACPI: APEI: EINJ: Create debugfs files to enter device id and syndrome ACPI: APEI: EINJ: Discover EINJv2 parameters ACPI: APEI: EINJ: Add einjv2 extension struct ACPI: APEI: EINJ: Enable the discovery of EINJv2 capabilities ACPI: APEI: EINJ: Fix kernel test sparse warnings
2025-07-22Merge branches 'acpica', 'acpi-proc', 'acpi-processor' and 'acpi-pm'Rafael J. Wysocki
Merge an ACPICA update, ACPI proc interface updates, ACPI processor driver updates, and ACPI power management updates for 6.17-rc1: - Printing the address in acpi_ex_trace_point() is either incorrect during early kernel boot or not really useful later when pathnames resolve properly, so stop doing it (Mario Limonciello) - Address several minor issues in the legacy ACPI proc interface (Andy Shevchenko) - Fix acpi_object union initialization in the ACPI processor driver to avoid using memory that contains leftover data (Sebastian Ott). - Make the ACPI processor perflib driver take the initial _PPC limit into account as appropriate (Jiayi Li). - Fix message formatting in the ACPI processor throttling driver (Colin Ian King). - Clean up general ACPI PM domain handling (Rafael Wysocki) * acpica: ACPICA: Decrease `AcpiExTracePoint` verbosity * acpi-proc: ACPI: proc: Prefer to use octal permission ACPI: proc: Use str_enabled_disabled() helper ACPI: proc: Remove unused header ACPI: proc: Use correct format specifier and drop casting ACPI: wakeup: Drop unneeded casting for sleep_state * acpi-processor: ACPI: processor: throttling: Remove space before newline ACPI: processor: perflib: Fix initial _PPC limit application ACPI: processor: fix acpi_object initialization * acpi-pm: ACPI: PM: Set .detach in acpi_general_pm_domain definition
2025-07-22Merge branch 'octeontx2-af-rpm-misc-feaures'Paolo Abeni
Hariprasad Kelam says: ==================== Octeontx2-af: RPM: misc feaures This series patches adds different features like debugfs support for shared firmware structure and DMAC filter related enhancements. Patch1: Saves interface MAC address configured from DMAC filters. Patch2: Disables the stale DMAC filters in driver initialization Patch3: Configure dma mask for CGX/RPM drivers Patch4: Debugfs support for shared firmware data. ==================== Link: https://patch.msgid.link/20250720163638.1560323-1-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22Octeontx2-af: Debugfs support for firmware dataHariprasad Kelam
MAC address, Link modes (supported and advertised) and eeprom data for the Netdev interface are read from the shared firmware data. This patch adds debugfs support for the same. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://patch.msgid.link/20250720163638.1560323-5-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22Octeontx2-af: RPM: Update DMA maskHariprasad Kelam
CGX/RPM driver supports 48 bits of DMA addressing. Update the DMA mask accordingly. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250720163638.1560323-4-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22Octeontx2-af: Disable stale DMAC filtersSubbaraya Sundeep
During driver initialization disable stale DMAC filters in CGX/RPM set by firmware. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250720163638.1560323-3-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22Octeontx2-af: Add programmed macaddr to RVU pfvfHariprasad Kelam
Octeontx2/CN10k MAC block supports DMAC filters. DMAC filters can be installed on the interface through ethtool. When a user installs a DMAC filter, the interface's MAC address is implicitly added to the filter list. To ensure consistency, this MAC address must be kept in sync with the pfvf->mac_addr field, which is used to install MAC-based NPC rules. This patch updates the pfvf->mac_addr field with the programmed MAC address and also enables VF interfaces to install DMAC filters. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250720163638.1560323-2-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequenceKathiravan Thirumoorthy
The current configuration used for the IPQ5332 M31 USB PHY fails the Near End High Speed Signal Quality compliance test. To resolve this, update the initialization sequence as specified in the Hardware Design Document. Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver") Cc: stable@kernel.org Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250630-ipq5332_hsphy_complaince-v2-1-63621439ebdb@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-07-22dt-bindings: phy: Convert brcm,sr-usb-combo-phy to DT schemaRob Herring (Arm)
Convert the Broadcom Stingray USB PHY binding to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20250627220126.214577-1-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-07-22dt-bindings: phy: Convert ti,da830-usb-phy to DT schemaRob Herring (Arm)
Convert the TI DA830 USB PHY binding to DT schema format. Add "clocks" and "clock-names" which are already in use. As they are always present, make them required as well. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: David Lechner <david@lechnology.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250627220107.214162-1-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-07-22dt-bindings: phy: marvell,mmp2-usb-phy: Drop status from the exampleKrzysztof Kozlowski
Examples should not have the 'status' property and 'okay' is anyway by default. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250701063636.23872-2-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-07-22dt-bindings: phy: mixel, mipi-dsi-phy: Allow assigned-clock* propertiesLiu Ying
assigned-clock* properties can be used by default now, so allow them. Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250707-dt-bindings-phy-mixel-mipi-dsi-phy-allow-assign-clock-properties-v1-1-5e34b257e1ef@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-07-22phy: exynos-mipi-video: correct cam0 sysreg property name for exynos7870Kaustabh Chakraborty
Fix the cam0 sysreg property name (samsung,cam0-sysreg), which has been erroneously declared as samsung,cam-sysreg. This follows the same name used in Exynos5433 PHY. Fixes: 543f5e314282 ("phy: exynos-mipi-video: introduce support for exynos7870") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org> Link: https://lore.kernel.org/r/20250710-exynos7870-mipi-phy-fix-v2-1-5cf50d69c9d7@disroot.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-07-22ibmveth: Add multi buffers rx replenishment hcall supportMingming Cao
This patch enables batched RX buffer replenishment in ibmveth by using the new firmware-supported h_add_logical_lan_buffers() hcall to submit up to 8 RX buffers in a single call, instead of repeatedly calling the single-buffer h_add_logical_lan_buffer() hcall. During the probe, with the patch, the driver queries ILLAN attributes to detect IBMVETH_ILLAN_RX_MULTI_BUFF_SUPPORT bit. If the attribute is present, rx_buffers_per_hcall is set to 8, enabling batched replenishment. Otherwise, it defaults to 1, preserving the original upstream behavior with no change in code flow for unsupported systems. The core rx replenish logic remains the same. But when batching is enabled, the driver aggregates up to 8 fully prepared descriptors into a single h_add_logical_lan_buffers() hypercall. If any allocation or DMA mapping fails while preparing a batch, only the successfully prepared buffers are submitted, and the remaining are deferred for the next replenish cycle. If at runtime the firmware stops accepting the batched hcall—e,g, after a Live Partition Migration (LPM) to a host that does not support h_add_logical_lan_buffers(), the hypercall returns H_FUNCTION. In that case, the driver transparently disables batching, resets rx_buffers_per_hcall to 1, and falls back to the single-buffer hcall in next future replenishments to take care of these and future buffers. Test were done on systems with firmware that both supports and does not support the new h_add_logical_lan_buffers hcall. On supported firmware, this reduces hypercall overhead significantly over multiple buffers. SAR measurements showed about a 15% improvement in packet processing rate under moderate RX load, with heavier traffic seeing gains more than 30% Signed-off-by: Mingming Cao <mmc@linux.ibm.com> Reviewed-by: Brian King <bjking1@linux.ibm.com> Reviewed-by: Haren Myneni <haren@linux.ibm.com> Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250719091356.57252-1-mmc@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22platform/x86/amd: pmc: Add Lenovo Yoga 6 13ALC6 to pmc quirk listMario Limonciello
The Lenovo Yoga 6 13ACL6 82ND has a similar BIOS problem as other Lenovo laptops from that vintage that causes a rather long resume from suspend. Add it to the quirk list that manipulates the scratch register to avoid the issue. Reported-by: Adam Berglund <adam.f.berglund@hotmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4434 Tested-by: Adam Berglund <adam.f.berglund@hotmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250718172307.1928744-1-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86: dell-uart-backlight: Use blacklight power constantThomas Zimmermann
The backlight subsystem has gotten its own power constants. Replace FB_BLANK_UNBLANK with BACKLIGHT_POWER_ON. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250715122643.137027-2-tzimmermann@suse.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22Merge back earlier thermal control updates for 6.17Rafael J. Wysocki
2025-07-22Merge tag 'thermal-v6.17-rc1' of ↵Rafael J. Wysocki
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux Merge thermal driver updates for 6.17-rc1 from Daniel Lezcano: "- Enable the stage 2 shutdown and support to more SPMI variants (Anjelique Melendez) - Constify thermal_zone_device_ops structure when possible in the different thermal drivers (Christophe Jaillet) - Use the dev_fwnode() helper instead of of_fwnode_handle() which is more adequate wherever is possible in the thermal drivers (Jiri Slaby) - Implement and document One-Time Programmable fuse support for the Rockchip driver in order to increase the precision of the measurements (Nicolas Frattaroli) - Change the way the Mediatek LTVS driver stores the initialization data sequence to support different sequences regarding the current platform. Introduce the mt7988 support with a new initialization sequence (Mason Chang) - Document the QCom TSens Milos Temperature Sensor DT bindings (Luca Weiss) - Add the fallback compatible string for MT7981 and MT8516 DT bindings (Aleksander Jan Bajkowski) - Add the compatible string for Tegra210B01 SOC_THERM driver (Aaron Kling)" * tag 'thermal-v6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: dt-bindings: thermal: tegra: Document Tegra210B01 dt-bindings: thermal: mediatek: Add fallback compatible string for MT7981 and MT8516 dt-bindings: thermal: qcom-tsens: document the Milos Temperature Sensor thermal/drivers/mediatek/lvts_thermal: Add mt7988 lvts commands thermal/drivers/mediatek/lvts_thermal: Add lvts commands and their sizes to driver data thermal/drivers/mediatek/lvts_thermal: Change lvts commands array to static const thermal/drivers/rockchip: Support reading trim values from OTP dt-bindings: thermal: rockchip: document otp thermal trim thermal/drivers/rockchip: Support RK3576 SoC in the thermal driver dt-bindings: rockchip-thermal: Add RK3576 compatible thermal/drivers/rockchip: Rename rk_tsadcv3_tshut_mode thermal: Use dev_fwnode() thermal: Constify struct thermal_zone_device_ops thermal/drivers/loongson2: Constify struct thermal_zone_device_ops thermal/drivers/qcom-spmi-temp-alarm: Add support for LITE PMIC peripherals thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 2 PMIC peripherals thermal/drivers/qcom-spmi-temp-alarm: Prepare to support additional Temp Alarm subtypes thermal/drivers/qcom-spmi-temp-alarm: Add temp alarm data struct based on HW subtype thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
2025-07-22phy: qcom: phy-qcom-snps-eusb2: Update init sequence per HPG 1.0.2Luca Weiss
The eUSB2 HPG version 1.0.2 asks to clear bits [7:1] on all targets. Implement that change in the driver to follow. See also https://lore.kernel.org/linux-arm-msm/7d073433-f254-4d75-a68b-d184f900294a@oss.qualcomm.com/ Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250715-sm7635-eusb-phy-v3-4-6c3224085eb6@fairphone.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-07-22phy: qcom: phy-qcom-snps-eusb2: Add missing write from init sequenceLuca Weiss
As per a commit from Qualcomm's downstream 6.1 kernel[0], the init sequence is missing setting the CMN_CTRL_OVERRIDE_EN bit back to 0 at the end, as per the 'latest' HPG revision (as of November 2023). [0] https://git.codelinaro.org/clo/la/kernel/qcom/-/commit/b77774a89e3fda3246e09dd39e16e2ab43cd1329 Fixes: 80090810f5d3 ("phy: qcom: Add QCOM SNPS eUSB2 driver") Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20250715-sm7635-eusb-phy-v3-3-6c3224085eb6@fairphone.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-07-22dt-bindings: phy: qcom,snps-eusb2: document the Milos Synopsys eUSB2 PHYLuca Weiss
Document the Synopsys eUSB2 PHY on the Milos SoC by using the SM8550 as fallback. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20250715-sm7635-eusb-phy-v3-2-6c3224085eb6@fairphone.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-23 21:24:22 +0000