| Age | Commit message (Collapse) | Author |
|---|
|
Add bindings for SAM9X60's slow clock controller.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add documentation for Spectre vulnerability and the mitigation mechanisms:
- Explain the problem and risks
- Document the mitigation mechanisms
- Document the command line controls
- Document the sysfs files
Co-developed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The list of laptops supported by drivers in PDx86 subsystem is quite
big and growing. x86-laptop-drivers.txt contains details of very few
laptop models. Remove it because it does not serve any purpose.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Rob pointed out that one of the examples in the RISC-V 'cpus' YAML
schema results in warnings from 'make dt_binding_check'. Fix these.
While here, make the whitespace in the second example consistent
with the first example.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org> # for fixing the dtc warnings
|
|
Now that we can mark up function() automatically, there is no reason to use
:c:func: and every reason to avoid it. Adjust the documentation to reflect
that fact.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Now that the build system automatically marks up function references, we
don't have to clutter the source files, so take it out.
[Some paragraphs could now benefit from refilling, but that was left out to
avoid obscuring the real changes.]
Acked-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Rather than fill our text files with :c:func:`function()` syntax, just do
the markup via a hook into the sphinx build process.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
J721E SoCs have same I2C IP as OMAP SoCs. Add new compatible to
handle J721E SoCs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Switch the DT binding to a YAML schema to enable the DT validation.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Switch the DT binding to a YAML schema to enable the DT validation.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Add bindings for the I2C controller that can be found in the MediaTek
MT7621/7628/7688 SoCs.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Linux 5.2-rc6
|
|
This patch adds power management descriptions that consumers should
implement it.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq changes for v5.3 from Viresh Kumar:
"This pull request contains:
- Minor fixes for brcmstb driver (Florian).
- New imx-cpufreq driver, its bindings and code around it (Leonard).
- New Raspberry Pi driver (Nicolas).
- Minor fix for s5pv210 driver (Pawel).
- Minor cleanup for armada driver (YueHaibing)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: s5pv210: Don't flood kernel log after cpufreq change
cpufreq: add driver for Raspberry Pi
cpufreq: Switch imx7d to imx-cpufreq-dt for speed grading
cpufreq: imx-cpufreq-dt: Remove global platform match list
cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency
cpufreq: brcmstb-avs-cpufreq: Fix initial command check
cpufreq: armada-37xx: Remove set but not used variable 'freq'
cpufreq: imx-cpufreq-dt: Fix no OPPs available on unfused parts
dt-bindings: imx-cpufreq-dt: Document opp-supported-hw usage
cpufreq: Add imx-cpufreq-dt driver
|
|
Add the device tree bindings document for the NVMEM based reboot-mode
driver.
Signed-off-by: Nandor Han <nandor.han@vaisala.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add compatible string for the core clock on the 98dx1135 switch with
integrated CPU.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add some new clk devm APIs that we've added over time to the devres
documentation.
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The system counter (sys_ctr) is a programmable system counter
which provides a shared time base to the Cortex A15, A7, A53 etc cores.
It is intended for use in applications where the counter is always
powered on and supports multiple, unrelated clocks. The sys_ctr hardware
supports:
- 56-bit counter width (roll-over time greater than 40 years)
- compare frame(64-bit compare value) contains programmable interrupt
generation when compare value <= counter value.
[dlezcano] Fixed over 80 chars length warning
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
ARMv8.5 introduces the FRINT series of instructions for rounding floating
point numbers to integers. Provide a capability to userspace in order to
allow applications to determine if the system supports these instructions.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The InfiniBand docs are plain text with no markups. So, all we needed to
do were to add the title markups and some markup sequences in order to
properly parse tables, lists and literal blocks.
At its new index.rst, let's add a :orphan: while this is not linked to the
main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
ARMv8.5 adds new instructions XAFLAG and AXFLAG to translate the
representation of the results of floating point comparisons between the
native ARM format and an alternative format used by some software. Add
a hwcap allowing userspace to determine if they are present, since we
referred to earlier CondM extensions as FLAGM call these extensions
FLAGM2.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Right now none of the Ingenic-based boards probe this driver from
devicetree. This driver defined three compatible strings for the exact
same behaviour. Before these strings are used, we can remove two of
them.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
STM32 Timers support generic 3 cells PWM bindings to encode PWM number,
period and polarity as defined in pwm.txt.
Fixes: cd9a99c2f8e8 ("dt-bindings: pwm: Add STM32 bindings")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: Amlogic updates for v5.3
Highlights:
- new SoC: S922X (G12B family, A73/A53 big.LITTLE)
- new board: Hardkernel odroid-N2 (SoC: G12B S922X)
- add/use ethernet PHY interrupt/reset lines
- G12A: add/enable audio, PWM, IR, i2c, SD/eMMC, WiFi, bluetooth, network
- gxbb-vega-s95 board: fix WiFi/BT, enable more peripherals
* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (79 commits)
arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line
arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY interrupt line
arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line
arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings
arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line
arm64: dts: meson: g12a: sort sdio nodes correctly
arm64: dts: meson-g12a-x96-max: add sound card
arm64: dts: meson-g12b-odroid-n2: add sound card
arm64: dts: meson: sei510: add sound card
arm64: dts: meson: sei510: add max98357a DAC
ASoC: meson: add tohdmitx DT bindings
arm64: dts: meson: g12a: add the GPIO interrupt controller
arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s
arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/s
arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node
arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node
arm64: dts: meson-g12a-sei510: Enable Wifi SDIO module
arm64: dts: meson-g12a-x96-max: Enable Wifi SDIO Module
arm64: dts: meson-g12a-x96-max: add support for sdcard and emmc
arm64: dts: meson: g12a: add SDIO controller
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add documentation for pin control sleep state on STM32 LPTimer PWM.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
DT documentation for PWM controller added.
Signed-off-by: Wesley W. Terpstra <wesley@sifive.com>
[Atish: Compatible string update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers
soc: Amlogic driver updates for v5.3
- canvas: add support for Meson8*
* tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
soc: amlogic: canvas: add support for Meson8, Meson8b and Meson8m2
dt-bindings: soc: amlogic: canvas: document support for Meson8/8b/8m2
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm ARM Based Driver Updates for v5.3
* Add ACPI support to Qualcomm GENI SE
* Update Qualcomm Maintainers entry to remove David Brown as maintainer and
fixup typos and incorrect DT file entry
* Fixup APR domain id usage and making callbacks in non-atomic context
* Add AOSS QMP driver and bindings
* Add power domains for MSM8998 and QCS404 in QCOM RPMPD
* Add corner macros, max state support, and fixups for setting performance state
for Qcom RPMPD
* tag 'qcom-drivers-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: geni: Add support for ACPI
MAINTAINERS: Remove myself as qcom maintainer
soc: qcom: apr: Don't use reg for domain id
soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
soc: qcom: Add AOSS QMP driver
dt-bindings: soc: qcom: Add AOSS QMP binding
qcom: apr: Make apr callbacks in non-atomic context
soc: qcom: rpmpd: Add MSM8998 power-domains
dt-bindings: power: Add rpm power domain bindings for msm8998
soc: qcom: rpmpd: Add QCS404 power-domains
dt-bindings: power: Add rpm power domain bindings for qcs404
soc: qcom: rpmpd: Modify corner defining macros
soc: qcom: rpmpd: Add support to set rpmpd state to max
soc: qcom: rpmpd: fixup rpmpd set performance state
MAINTAINER: Fix Qualcomm ETHQOS ethernet DT file
MAINTAINERS: fix typo in file name
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The 98DX1135 is similar to the 98DX4122 except the MPP options differ.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT bindings for 5.3:
- Add vendor prefix for Purism SPC.
- Add bindings for i.MX8MQ EVK Board, Purism Librem5 devkit and i.MX7
Meerkat96 Board.
- Add LS1028A specific compatible into qDMA bindings doc.
- Move Emtrion i.MX6 board bindings to schema.
- Add missing schemas for i.MX7ULP and i.MX1/31/35 bindings.
* tag 'imx-bindings-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add missing schemas for i.MX1/31/35
dt-bindings: arm: fsl: Add back missing i.MX7ULP binding
dt-bindings: arm: Move Emtrion i.MX6 board bindings to schema
dt-bindings: arm: fsl: Add the imx8mq boards
dt-bindings: Add an entry for Purism SPC
dt-bindings: fsl-qdma: Add LS1028A qDMA bindings
dt-bindings: arm: Document 96Boards Meerkat96 devicetree binding
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for 5.3
- switch to new sckc bindings
- convert soc bindings to json-schema
* tag 'at91-5.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: arm: Convert Atmel board/soc bindings to json-schema
ARM: dts: at91: sama5d3: switch to new sckc bindings
ARM: dts: at91: at91sam9rl: switch to new sckc bindings
ARM: dts: at91: at91sam9g45: switch to new sckc bindings
ARM: dts: at91: at91sam9x5: switch to new sckc bindings
ARM: dts: at91sam9261ek: remove unused chosen nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.3, round 1
Highlights:
----------
MPU part:
-Add stm32mp157a-avenger board support:
This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
, 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards:
2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet
10/100/1000, WiFi 5 GHz & 2.4GHz, ...
-Add STMFX support en stm32mp157c-ev1 and enable joystick connected on
it.
-Add I2S and SAI support on stm32mp157c.
-Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards
(EV1 and DK2 inherit of it).
-Add camera support:
-Add DCMI support on stm32mp157c SOC
-Enabled OV5640 camera support on stm32mp157c-ev1 board
-Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1
board.
MCU part:
-Add STMFX support en stm32746g-eval and enable connections on it:
leds and joystick
* tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (27 commits)
ARM: dts: stm32: replace rgmii mode with rgmii-id on stm32mp15 boards
ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A
dt-bindings: arm: stm32: Document Avenger96 devicetree binding
dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema
ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157
ARM: dts: stm32: add sai id registers to stm32mp157c
ARM: dts: stm32: add power supply of rm68200 on stm32mp157c-ev1
ARM: dts: stm32: enable display on stm32mp157c-dk1 board
ARM: dts: stm32: Add I2C 1 config for stm32mp157a-dk1
ARM: dts: stm32: enable OV5640 camera on stm32mp157c-ev1 board
ARM: dts: stm32: add DCMI pins to stm32mp157c
ARM: dts: stm32: add DCMI camera interface support on stm32mp157c
ARM: dts: stm32: enable Vivante GPU support on stm32mp157a-dk1 board
ARM: dts: stm32: enable Vivante GPU support on stm32mp157c-ed1 board
ARM: dts: stm32: Add Vivante GPU support on STM32MP157c
ARM: dts: stm32: add i2s pins muxing on stm32mp157
ARM: dts: stm32: add i2s support on stm32mp157c
ARM: dts: stm32: add sai pins muxing on stm32mp157
ARM: dts: stm32: add sai support on stm32mp157c
ARM: dts: stm32: add jedec compatible for nor flash on stm32mp157c-ev1
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt
Renesas ARM Based SoC DT Bindings Updates for v5.3
* Renesas Gen3 DWC HDMI TX Encoder
- Add RZ/G2M (r8a774a1) support
* Renesas R-Car Compare Match Timer (CMT)
- Add R-Car H3 (r8a7795), M3-N (r8a77965) and E3 (r8a77990) support
* Renesas R-Car CAN FD Controller
- Add R-Car M3-N (r8a77965) and E3 (r8a77990), and RZ/G2E (r8a774c0) support
* Renesas R-Car CAN Controller
- Add RZ/G2M (r8a774a1) support
- Correct RZ/G2 clocks
* Vendor prefixes: Add vendor prefix for HopeRun
* Renesas SoCs and boards: Add HopeRun RZ/G2[M] boards
* tag 'renesas-dt-bindings-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
dt-bindings: display: renesas: Add r8a774a1 support
dt-bindings: timer: renesas, cmt: Document r8a779{5|65|90} CMT support
dt-bindings: can: rcar_canfd: document r8a774c0 support
dt-bindings: can: rcar_canfd: document r8a77990 support
dt-bindings: can: rcar_canfd: document r8a77965 support
dt-bindings: can: rcar_can: Add r8a774c0 support
dt-bindings: can: rcar_can: Fix RZ/G2 CAN clocks
dt-bindings: Add vendor prefix for HopeRun
dt-bindings: arm: renesas: Add HopeRun RZ/G2[M] boards
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of arm64 DT changes, this time with:
- Some fixes for the DT schemas that were added during this release
- Wifi support for the H6
- LRADC suppport for the A64
- Some background work on A64 boards, to enable various devices such
as touchscreens, PMIC, audio, wifi, etc.
* tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Add DMA node
arm64: dts: allwinner: a64: Add lradc node
dt-bindings: input: sun4i-lradc-keys: Add A64 compatible
arm64: dts: allwinner: h6: add r_watchog node
arm64: dts: allwinner: h6: add watchdog node
dt-bindings: watchdog: add Allwinner H6 watchdog
arm64: dts: allwinner: a64: Enable audio on Teres-I
arm64: dts: allwinner: a64: bananapi-m64: Enable PMIC USB power supply
arm64: dts: allwinner: axp803: add USB power supply node
arm64: dts: allwinner: a64: Add pinmux for RGB666 LCD
arm64: dts: allwinner: a64: orangepi-win: Add wifi and bluetooth nodes
arm64: dts: allwinner: h6: add PIO VCC bank supplies for Pine H64
arm64: dts: allwinner: a64-oceanic-5205-5inmfd: Enable GT911 CTP
arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node
arm64: dts: allwinner: a64: move I2C pinctrl to dtsi
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches:
- Some work on the BPi M2-Berry to support various devices
- Convert some bindings to a schema, and a lot of fixes reported by
the schemas we introduced.
- A few other fixes here and there
* tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
dt-bindings: pwm: Convert Allwinner PWM to a schema
ARM: dts: sun8i: r40: Change the RTC compatible
ARM: dts: sun8i: v3s: Add external crystals accuracy
ARM: dts: sun8i: v3s: Fix the RTC node
ARM: dts: sun6i: Add external crystals accuracy
ARM: dts: sun6i: Fix RTC node
ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface)
ARM: dts: gr8-evb: Fix RTC vendor
ARM: dts: sun7i: icnova-swac: Fix the model vendor
ARM: dts: sun8i: a711: Change LRADC node names to avoid warnings
ARM: dts: sun7i: olimex-lime2: Enable ac and power supplies
ARM: dts: sun6i: Add default address and size cells for SPI
ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT
dt-bindings: bus: Convert Allwinner RSB to a schema
ARM: dts: sun8i: r40: bananapi-m2-ultra: Remove regulator-always-on
ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller
ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add binding doc for i.MX8MN pinctrl driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Somewhere in all the patchsets before, this cleanup got lost.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20190624091539.13512-1-Jason@zx2c4.com
|
|
into drm-next
Picking up pace on the upstreaming of Komeda driver, with quite a lot
of new features added this time. On top of that we have the small
cleanups and improved usage of the debugfs functions. Please pull!
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621095349.GI17204@e110455-lin.cambridge.arm.com
|
|
Fix documentation that mention xdpsock_kern.c which has been
replaced by code embedded in libbpf.
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Update bindings to support for qcom,pm8998-pon which uses gen2 pon
Cc: Andy Gross <agross@kernel.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add vendor compatibles for specific implementation of Mali Utgard
(Exynos3250, Exynos4-family) and Midgard (Exynos5433, Exynos7).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
|
|
Currently during soft reboot(kexec_file_load) boot command line
arguments are not measured. Define hooks needed to measure kexec
command line arguments during soft reboot(kexec_file_load).
- A new ima hook ima_kexec_cmdline is defined to be called by the
kexec code.
- A new function process_buffer_measurement is defined to measure
the buffer hash into the IMA measurement list.
- A new func policy KEXEC_CMDLINE is defined to control the
measurement.
Signed-off-by: Prakhar Srivastava <prsriva02@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Added documentation for Infineon PXE1610 driver
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Since two new sysfs interface files are created for umwait control, add
an ABI document entry for the files:
/sys/devices/system/cpu/umwait_control/enable_c02
/sys/devices/system/cpu/umwait_control/max_time
[ tglx: Made the write value instructions readable ]
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Cc: "Borislav Petkov" <bp@alien8.de>
Cc: "H Peter Anvin" <hpa@zytor.com>
Cc: "Andy Lutomirski" <luto@kernel.org>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Link: https://lkml.kernel.org/r/1560994438-235698-6-git-send-email-fenghua.yu@intel.com
|
|
There seems to be some confusion surrounding three PHY interface modes,
specifically 1000BASE-X, 2500BASE-X and SGMII. Add some documentation
to phylib detailing precisely what these interface modes refer to.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We want the fixes and this resolves a merge issue as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here too.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
