| Age | Commit message (Collapse) | Author |
|---|
|
Like others, the MediaTek DisplayPort controller provides an
auxiliary bus: import the common dp-aux-bus.yaml in this binding
to allow specifying an aux-bus subnode.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
It is currently impossible to enable ipv6 forwarding on a per-interface
basis like in ipv4. To enable forwarding on an ipv6 interface we need to
enable it on all interfaces and disable it on the other interfaces using
a netfilter rule. This is especially cumbersome if you have lots of
interfaces and only want to enable forwarding on a few. According to the
sysctl docs [0] the `net.ipv6.conf.all.forwarding` enables forwarding
for all interfaces, while the interface-specific
`net.ipv6.conf.<interface>.forwarding` configures the interface
Host/Router configuration.
Introduce a new sysctl flag `force_forwarding`, which can be set on every
interface. The ip6_forwarding function will then check if the global
forwarding flag OR the force_forwarding flag is active and forward the
packet.
To preserve backwards-compatibility reset the flag (on all interfaces)
to 0 if the net.ipv6.conf.all.forwarding flag is set to 0.
Add a short selftest that checks if a packet gets forwarded with and
without `force_forwarding`.
[0]: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
Link: https://patch.msgid.link/20250722081847.132632-1-g.goller@proxmox.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert fsl,vf610-mscm-ir.txt to yaml format.
Additional changes:
- remove label at example dts.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250724190342.1321632-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add fsl,icoll.yaml for i.MX23 and i.MX28.
Also add a generic fallback compatible string "fsl,icoll" for legacy
devices, which have existed for over 15 years.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250724164624.1271661-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add missing description for AMD/Xilinx interrupt controller. The binding is
used by Microblaze before dt-binding even existed but never been
documented properly.
IP acts as primary interrupt controller on Microblaze systems or can be
used as secondary interrupt controller on ARM based systems like Zynq,
ZynqMP, Versal or Versal Gen 2. Also as secondary interrupt controller on
Microblaze-V (Risc-V) systems.
Over the years IP exists in multiple variants based on attached bus as OPB,
PLB or AXI that's why generic filename is used.
Property xlnx,kind-of-intr is in hex because every bit position corresponds
to interrupt line. Controller support mixing edge or level interrupts
together and this is the property which distinguish them.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/2b9d4a3a693f501d420da88b8418732ba9def877.1753354675.git.michal.simek@amd.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
'cxl' is missing from the path to the clear_poison attribute. Add it.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250724224308.2101255-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
List the version information reported by the kvaser_usb driver
through devlink.
Suggested-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250725123452.41-12-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
List the version information reported by the kvaser_pciefd driver
through devlink.
Suggested-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250725123230.8-11-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Rather confusingly, setting all Transparent Huge Page sysfs settings to
"never" does not in fact result in THP being globally disabled.
Rather, it results in khugepaged being disabled, but one can still obtain
THP pages using madvise(..., MADV_COLLAPSE).
This is something that has remained poorly documented for some time, and
it is likely the received wisdom of most users of THP that never does, in
fact, mean never.
It is therefore important to highlight, very clearly, that this is not the
case.
[lorenzo.stoakes@oracle.com: update transhuge page to mention MADV_COLLAPSE]
Link: https://lkml.kernel.org/r/d54d1dfb-f06d-4979-983b-73998f05867e@lucifer.local
Link: https://lkml.kernel.org/r/20250721155530.75944-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document the new DAMON sysfs file, refresh_ms, on the ABI document.
Link: https://lkml.kernel.org/r/20250717055448.56976-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document the new DAMON sysfs file, refresh_ms, on the usage document.
Link: https://lkml.kernel.org/r/20250717055448.56976-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of using '0' and '1' for napi threaded state use an enum with
'disabled' and 'enabled' states.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-4-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_sync: fix double free in 'hci_discovery_filter_clear()'
- hci_event: Mask data status from LE ext adv reports
- hci_devcd_dump: fix out-of-bounds via dev_coredumpv
- ISO: add socket option to report packet seqnum via CMSG
- hci_event: Add support for handling LE BIG Sync Lost event
- ISO: Support SCM_TIMESTAMPING for ISO TS
- hci_core: Add PA_LINK to distinguish BIG sync and PA sync connections
- hci_sock: Reset cookie to zero in hci_sock_free_cookie()
drivers:
- btusb: Add new VID/PID 0489/e14e for MT7925
- btusb: Add a new VID/PID 2c7c/7009 for MT7925
- btusb: Add RTL8852BE device 0x13d3:0x3618
- btusb: Add support for variant of RTL8851BE (USB ID 13d3:3601)
- btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano
- btusb: QCA: Support downloading custom-made firmwares
- btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
- nxp: add support for supply and reset
- btnxpuart: Add support for 4M baudrate
- btnxpuart: Correct the Independent Reset handling after FW dump
- btnxpuart: Add uevents for FW dump and FW download complete
- btintel: Define a macro for Intel Reset vendor command
- btintel_pcie: Support Function level reset
- btintel_pcie: Add support for device 0x4d76
- btintel_pcie: Make driver wait for alive interrupt
- btintel_pcie: Fix Alive Context State Handling
- hci_qca: Enable ISO data packet RX
* tag 'for-net-next-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (42 commits)
Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections
Bluetooth: hci_event: Mask data status from LE ext adv reports
Bluetooth: btintel_pcie: Fix Alive Context State Handling
Bluetooth: btintel_pcie: Make driver wait for alive interrupt
Bluetooth: hci_devcd_dump: fix out-of-bounds via dev_coredumpv
Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()'
Bluetooth: btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
Bluetooth: btusb: Sort WCN6855 device IDs by VID and PID
Bluetooth: btusb: QCA: Support downloading custom-made firmwares
Bluetooth: btnxpuart: Add uevents for FW dump and FW download complete
Bluetooth: btnxpuart: Correct the Independent Reset handling after FW dump
Bluetooth: ISO: Support SCM_TIMESTAMPING for ISO TS
Bluetooth: ISO: add socket option to report packet seqnum via CMSG
Bluetooth: btintel: Define a macro for Intel Reset vendor command
Bluetooth: Fix typos in comments
Bluetooth: RFCOMM: Fix typos in comments
Bluetooth: aosp: Fix typo in comment
Bluetooth: hci_bcm4377: Fix typo in comment
Bluetooth: btrtl: Fix typo in comment
Bluetooth: btmtk: Fix typo in log string
...
====================
Link: https://patch.msgid.link/20250723190233.166823-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another wireless update:
- rtw89:
- STA+P2P concurrency
- support for USB devices RTL8851BU/RTL8852BU
- ath9k: OF support
- ath12k:
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- iwlwifi: some FIPS interoperability
- brcm80211: support SDIO 43751 device
- rt2x00: better DT/OF support
- cfg80211/mac80211:
- improved S1G support
- beacon monitor for MLO
* tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (199 commits)
ssb: use new GPIO line value setter callbacks for the second GPIO chip
wifi: Fix typos
wifi: brcmsmac: Use str_true_false() helper
wifi: brcmfmac: fix EXTSAE WPA3 connection failure due to AUTH TX failure
wifi: brcm80211: Remove yet more unused functions
wifi: brcm80211: Remove more unused functions
wifi: brcm80211: Remove unused functions
wifi: iwlwifi: Revert "wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions"
wifi: iwlwifi: check validity of the FW API range
wifi: iwlwifi: don't export symbols that we shouldn't
wifi: iwlwifi: mld: use spec link id and not FW link id
wifi: iwlwifi: mld: decode EOF bit for AMPDUs
wifi: iwlwifi: Remove support for rx OMI bandwidth reduction
wifi: iwlwifi: stop supporting iwl_omi_send_status_notif ver 1
wifi: iwlwifi: remove SC2F firmware support
wifi: iwlwifi: mvm: Remove NAN support
wifi: iwlwifi: mld: avoid outdated reorder buffer head_sn
wifi: iwlwifi: mvm: avoid outdated reorder buffer head_sn
wifi: iwlwifi: disable certain features for fips_enabled
wifi: iwlwifi: mld: support channel survey collection for ACS scans
...
====================
Link: https://patch.msgid.link/20250724100349.21564-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Zixian Zeng <sycamoremoon376@gmail.com>:
Add support SPI NOR flash memory controller for SG2042, using upstreamed
SG2044 SPI NOR driver.
Tested on SG2042 Pioneer Box, read, write operations.
Thanks Chen Wang who provided machine and guidance.
|
|
Add doorbell test case.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: Reworded the testcase description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-8-57683fc7fb25@nxp.com
|
|
Merge series from Fabrizio Castro <fabrizio.castro.jz@renesas.com>:
This series adds support for the Renesas RZ/V2H RSPI IP.
|
|
Convert lpc1850-cgu.txt to yaml format.
Additional changes:
- remove extra clock source nodes in example.
- remove clock consumer in example.
- remove clock-output-names and clock-clock-indices from required list to
match existed dts.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250606162410.1361169-1-Frank.Li@nxp.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250630232625.3700213-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250630232637.3700584-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250630232644.3700781-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250630232652.3701007-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250630232658.3701225-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Merge series from Xianwei Zhao <xianwei.zhao@amlogic.com>:
Introduced support for the new SPI IP (SPISG). The SPISG is
a communication-oriented SPI controller from Amlogic,supporting
three operation modes: PIO, block DMA, and scatter-gather DMA.
Add the drivers and device tree bindings corresponding to the SPISG.
|
|
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250630232617.3699954-1-robh@kernel.org
[sboyd@kernel.org: Update to korg]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
No double colon is necessary in the description. Fix it for all bindings
so future bindings won't have the same copy-paste mistake.
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/lkml/20250625150458.GA1182597-robh@kernel.org/
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250717-bindings-double-colon-v1-1-c04abc180fcd@fairphone.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc8).
Conflicts:
drivers/net/ethernet/microsoft/mana/gdma_main.c
9669ddda18fb ("net: mana: Fix warnings for missing export.h header inclusion")
755391121038 ("net: mana: Allocate MSI-X vectors dynamically")
https://lore.kernel.org/20250711130752.23023d98@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/icssg/icssg_prueth.h
6e86fb73de0f ("net: ti: icssg-prueth: Fix buffer allocation for ICSSG")
ffe8a4909176 ("net: ti: icssg-prueth: Read firmware-names from device tree")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* for-next/feat_mte_store_only:
: MTE feature to restrict tag checking to store only operations
kselftest/arm64/mte: Add MTE_STORE_ONLY testcases
kselftest/arm64/mte: Preparation for mte store only test
kselftest/arm64/abi: Add MTE_STORE_ONLY feature hwcap test
KVM: arm64: Expose MTE_STORE_ONLY feature to guest
arm64/hwcaps: Add MTE_STORE_ONLY hwcaps
arm64/kernel: Support store-only mte tag check
prctl: Introduce PR_MTE_STORE_ONLY
arm64/cpufeature: Add MTE_STORE_ONLY feature
|
|
'for-next/misc', 'for-next/acpi', 'for-next/debug-entry', 'for-next/feat_mte_tagged_far', 'for-next/kselftest', 'for-next/mdscr-cleanup' and 'for-next/vmap-stack', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: (23 commits)
drivers/perf: hisi: Support PMUs with no interrupt
drivers/perf: hisi: Relax the event number check of v2 PMUs
drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
drivers/perf: hisi: Simplify the probe process for each DDRC version
perf/arm-ni: Support sharing IRQs within an NI instance
perf/arm-ni: Consolidate CPU affinity handling
perf/cxlpmu: Fix typos in cxl_pmu.c comments and documentation
perf/cxlpmu: Remove unintended newline from IRQ name format string
perf/cxlpmu: Fix devm_kcalloc() argument order in cxl_pmu_probe()
perf: arm_spe: Relax period restriction
perf: arm_pmuv3: Add support for the Branch Record Buffer Extension (BRBE)
KVM: arm64: nvhe: Disable branch generation in nVHE guests
arm64: Handle BRBE booting requirements
arm64/sysreg: Add BRBE registers and fields
perf/arm: Add missing .suppress_bind_attrs
perf/arm-cmn: Reduce stack usage during discovery
perf: imx9_perf: make the read-only array mask static const
perf/arm-cmn: Broaden module description for wider interconnect support
...
* for-next/livepatch:
: Support for HAVE_LIVEPATCH on arm64
arm64: Kconfig: Keep selects somewhat alphabetically ordered
arm64: Implement HAVE_LIVEPATCH
arm64: stacktrace: Implement arch_stack_walk_reliable()
arm64: stacktrace: Check kretprobe_find_ret_addr() return value
arm64/module: Use text-poke API for late relocations.
* for-next/user-contig-bbml2:
: Optimise the TLBI when folding/unfolding contigous PTEs on hardware with BBML2 and no TLB conflict aborts
arm64/mm: Elide tlbi in contpte_convert() under BBML2
iommu/arm: Add BBM Level 2 smmu feature
arm64: Add BBM Level 2 cpu feature
arm64: cpufeature: Introduce MATCH_ALL_EARLY_CPUS capability type
* for-next/misc:
: Miscellaneous arm64 patches
arm64/gcs: task_gcs_el0_enable() should use passed task
arm64: signal: Remove ISB when resetting POR_EL0
arm64/mm: Drop redundant addr increment in set_huge_pte_at()
arm64: Mark kernel as tainted on SAE and SError panic
arm64/gcs: Don't call gcs_free() when releasing task_struct
arm64: fix unnecessary rebuilding when CONFIG_DEBUG_EFI=y
arm64/mm: Optimize loop to reduce redundant operations of contpte_ptep_get
arm64: pi: use 'targets' instead of extra-y in Makefile
* for-next/acpi:
: Various ACPI arm64 changes
ACPI: Suppress misleading SPCR console message when SPCR table is absent
ACPI: Return -ENODEV from acpi_parse_spcr() when SPCR support is disabled
* for-next/debug-entry:
: Simplify the debug exception entry path
arm64: debug: remove debug exception registration infrastructure
arm64: debug: split bkpt32 exception entry
arm64: debug: split brk64 exception entry
arm64: debug: split hardware watchpoint exception entry
arm64: debug: split single stepping exception entry
arm64: debug: refactor reinstall_suspended_bps()
arm64: debug: split hardware breakpoint exception entry
arm64: entry: Add entry and exit functions for debug exceptions
arm64: debug: remove break/step handler registration infrastructure
arm64: debug: call step handlers statically
arm64: debug: call software breakpoint handlers statically
arm64: refactor aarch32_break_handler()
arm64: debug: clean up single_step_handler logic
* for-next/feat_mte_tagged_far:
: Support for reporting the non-address bits during a synchronous MTE tag check fault
kselftest/arm64/mte: Add mtefar tests on check_mmap_options
kselftest/arm64/mte: Refactor check_mmap_option test
kselftest/arm64/mte: Add verification for address tag in signal handler
kselftest/arm64/mte: Add address tag related macro and function
kselftest/arm64/mte: Check MTE_FAR feature is supported
kselftest/arm64/mte: Register mte signal handler with SA_EXPOSE_TAGBITS
kselftest/arm64: Add MTE_FAR hwcap test
KVM: arm64: Expose FEAT_MTE_TAGGED_FAR feature to guest
arm64: Report address tag when FEAT_MTE_TAGGED_FAR is supported
arm64/cpufeature: Add FEAT_MTE_TAGGED_FAR feature
* for-next/kselftest:
: Kselftest updates for arm64
kselftest/arm64: Handle attempts to disable SM on SME only systems
kselftest/arm64: Fix SVE write data generation for SME only systems
kselftest/arm64: Test SME on SME only systems in fp-ptrace
kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace
kselftest/arm64: Allow sve-ptrace to run on SME only systems
kselftest/arm4: Provide local defines for AT_HWCAP3
kselftest/arm64: Specify SVE data when testing VL set in sve-ptrace
kselftest/arm64: Fix test for streaming FPSIMD write in sve-ptrace
kselftest/arm64: Fix check for setting new VLs in sve-ptrace
kselftest/arm64: Convert tpidr2 test to use kselftest.h
* for-next/mdscr-cleanup:
: Drop redundant DBG_MDSCR_* macros
KVM: selftests: Change MDSCR_EL1 register holding variables as uint64_t
arm64/debug: Drop redundant DBG_MDSCR_* macros
* for-next/vmap-stack:
: Force VMAP_STACK on arm64
arm64: remove CONFIG_VMAP_STACK checks from entry code
arm64: remove CONFIG_VMAP_STACK checks from SDEI stack handling
arm64: remove CONFIG_VMAP_STACK checks from stacktrace overflow logic
arm64: remove CONFIG_VMAP_STACK conditionals from traps overflow stack
arm64: remove CONFIG_VMAP_STACK conditionals from irq stack setup
arm64: Remove CONFIG_VMAP_STACK conditionals from THREAD_SHIFT and THREAD_ALIGN
arm64: efi: Remove CONFIG_VMAP_STACK check
arm64: Mandate VMAP_STACK
arm64: efi: Fix KASAN false positive for EFI runtime stack
arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth()
arm64/gcs: Don't call gcs_free() during flush_gcs()
arm64: Restrict pagetable teardown to avoid false warning
docs: arm64: Fix ICC_SRE_EL2 register typo in booting.rst
|
|
The 'next' operator is a unary operator. It is defined as: "next time, the
operand must be true".
Support this operator. For RV monitors, "next time" means the next
invocation of ltl_validate().
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/9c32cec04dd18d2e956fddd84b0e0a2503daa75a.1752239482.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add documents describing linear temporal logic runtime verification
monitors and how to generate them using rvgen.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/be13719e66fd8da147d7c69d5365aa23c52b743f.1751634289.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Monitor synthesis from deterministic automaton and linear temporal logic
have a lot in common. Therefore a single document should describe both.
Change da_monitor_synthesis.rst to monitor_synthesis.rst. LTL monitor
synthesis will be added to this file by a follow-up commit.
This makes the diff far easier to read. If renaming and adding LTL info is
done in a single commit, git wouldn't recognize it as a rename, but a file
removal and a file addition.
While at it, correct the old dot2k commands to the new rvgen commands.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/d91c6e4600287f4732d68a014219e576a75ce6dc.1751634289.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The logic there which adds a dependency note to Sphinx cache
is not taking into account that the build dir may not be
the source dir. This causes a performance regression:
$ time make O=/tmp/foo SPHINXDIRS=admin-guide htmldocs
[OUTDATED]
Added: set()
Changed: {'abi-obsolete', 'abi-removed', 'abi-stable-files', 'abi-obsolete-files', 'abi-stable', 'abi', 'abi-removed-files', 'abi-testing-files', 'abi-testing', 'gpio/index', 'gpio/obsolete'}
Removed: set()
All docs count: 385
Found docs count: 385
real 0m11,324s
user 0m15,783s
sys 0m1,164s
To get the root cause of the problem (ABI files reported as changed),
I used this changeset:
diff --git a/Documentation/conf.py b/Documentation/conf.py
index e8766e689c1b..ab486623bd8b 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -571,3 +571,16 @@ def setup(app):
"""Patterns need to be updated at init time on older Sphinx versions"""
app.connect('config-inited', update_patterns)
+ app.connect('env-get-outdated', on_outdated)
+
+def on_outdated(app, env, added, changed, removed):
+ """Track cache outdated due to added/changed/removed files"""
+ print("\n[OUTDATED]")
+ print(f"Added: {added}")
+ print(f"Changed: {changed}")
+ print(f"Removed: {removed}")
+ print(f"All docs count: {len(env.all_docs)}")
+ print(f"Found docs count: {len(env.found_docs)}")
+
+ # Just return what we have
+ return added | changed | removed
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Closes: https://lore.kernel.org/linux-doc/c174f7c5-ec21-4eae-b1c3-f643cca90d9d@gmail.com/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/e25673d87357457bc54ee863e97ff8f75956580d.1752752211.git.mchehab+huawei@kernel.org
|
|
The x86-specific functions kvm_guest_{enter,exit}_irqoff() were removed
and replaced by the generic guest_state_{enter,exit}_irqoff() in commit
ef9989afda73 ("kvm: add guest_state_{enter,exit}_irqoff()") and commit
b2d2af7e5df3 ("kvm/x86: rework guest entry logic").
Update the references in the entry/exit handling documentation.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nicolas Saenz Julienne <nsaenz@amazon.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250723075134.105132-1-ajd@linux.ibm.com
|
|
Commit 415c7451872b ("md: Remove deprecated CONFIG_MD_FAULTY") removed
the md-faulty driver, so drop the outdated reference from the
fault-injection documentation.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250723102835.232740-1-vignesh.raman@collabora.com
|
|
Add dt-bindings for the RSPI IP found inside the Renesas RZ/V2H(P)
SoC.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250704162036.468765-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add microchip,sam9x7-ssc to DT bindings documentation.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250610065005.64070-1-varshini.rajendran@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SPISG is a new communication oriented SPI controller of Amlogic, which
supports PIO, block DMA and scatter-gather DMA three operation modes.
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20250718-spisg-v5-1-b8f0f1eb93a2@amlogic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With further testing, directly using the spi-sg2044-nor driver on SG2042
does not work. SG2042 is found to lack full compatibility with SG2044.
SG2044 has OPT register and it's necessary to write but SG2042 does not.
Due to other possible hardware detail differences, it is better
to bind SG2042 independently.
Fixes: 8450f1e0d3d0 ("spi: dt-bindings: spi-sg2044-nor: Add SOPHGO SG2042")
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang
Link: https://patch.msgid.link/20250720-sfg-spifmc-v4-1-033188ad801e@gmail.com
Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch supports to readahead more blocks in erofs_readdir(), it can
enhance readdir performance in large direcotry.
readdir test in a large directory which contains 12000 sub-files.
files_per_second
Before: 926385.54
After: 2380435.562
Meanwhile, let's introduces a new sysfs entry to control readahead
bytes to provide more flexible policy for readahead of readdir().
- location: /sys/fs/erofs/<disk>/dir_ra_bytes
- default value: 16384
- disable readahead: set the value to 0
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250721021352.2495371-1-chao@kernel.org
[ Gao Xiang: minor styling adjustment. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Thanks to the meta buffer infrastructure, metadata-compressed inodes are
just read from the metabox inode instead of the blockdevice (or backing
file) inode.
The same is true for shared extended attributes.
When metadata compression is enabled, inode numbers are divided from
on-disk NIDs because of non-LTS 32-bit application compatibility.
Co-developed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Bo Liu (OpenAnolis) <liubo03@inspur.com>
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250722003229.2121752-1-hsiangkao@linux.alibaba.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO, Power and SoC due for the v6.17 merge window
|
|
The RK806 PMIC allows to configure its reset/restart behavior whenever
the PMIC is reset either programmatically or via some external pins
(e.g. PWRCTRL or RESETB).
The following modes exist:
- 0; restart PMU,
- 1; reset all power off reset registers and force state to switch to
ACTIVE mode,
- 2; same as mode 1 and also pull RESETB pin down for 5ms,
For example, some hardware may require a full restart (mode 0) in order
to function properly as regulators are shortly interrupted in this mode.
This is the case for RK3588 Jaguar and RK3588 Tiger which have a
companion microcontroller running on an independent power supply and
monitoring the PMIC power rail to know the state of the main system.
When it detects a restart, it resets its own IPs exposed to the main
system as if to simulate its own reset. Failing to perform this fake
reset of the microcontroller may break things (e.g. watchdog not
automatically disabled, buzzer still running until manually disabled,
leftover configuration from previous main system state, etc...).
Some other systems may be depending on the power rails to not be
interrupted even for a small amount of time[1].
This allows to specify how the PMIC should perform on the hardware level
and may differ between hardware designs, so a DT property seems
warranted. I unfortunately do not see how this could be made generic
enough to make it a non-vendor property.
[1] https://lore.kernel.org/linux-rockchip/2577051.irdbgypaU6@workhorse/
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250627-rk8xx-rst-fun-v4-1-ce05d041b45f@cherry.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Document why the binding uses oneOf when specifying just one of the
interrupt properties is supposed to be enough.
dtschema's fixups.py has special treatment of the interrupts and
interrupts-extended properties, but that appears to work at the top
level only. Elsewhere, an explicit oneOf is required.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250627-s2mpg10-binding-comment-v1-1-f37e5187f0fd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
commit b0a5cde57cf1 ("dt-bindings: mfd: Explain lack of child dependency
in simple-mfd") pointed out that it's a mistake for a child device of
a simple MFD device to depend on the simple MFD device's clock resources.
fsl,imx8qxp-csr.yaml happens to make that mistake. To fix that, remove
fsl,imx8qxp-csr.yaml and use "simple-pm-bus" and "syscon" as the CSR node's
compatible strings in the examples of fsl,imx8qxp-pixel-link-msi-bus.yaml
to replace the wrong compatible strings which include "simple-mfd" and
"fsl,imx8qxp-mipi-lvds-csr". Since fsl,imx8qxp-pixel-link-msi-bus.yaml
as the last user of the CSR compatible strings no longer uses them, it's
safe to remove the fsl,imx8qxp-csr.yaml binding documentation.
Fixes: 9b2c55b5403f ("dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding")
Fixes: c08645ea215c ("dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250620022537.3072877-1-victor.liu@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
phy-lpc18xx-usb-otg to YAML format
Combine the following separate plain text based bindings to YAML:
lpc1850-creg-clk.txt
pc1850-dmamux.txt
phy-lpc18xx-usb-otg.txt
Additional changes:
- remove label in example.
- remove dmamux consumer in example.
- remove clock consumer in example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250602143612.943516-1-Frank.Li@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Convert the Freescale MXS Low-Resoulution ADC (LRADC) device tree
binding documentation to json-schema.
The clocks and #io-channel-cells properties have also been added; They
are present in the respective SoC DTSI files but were missing from the
old mxs-lradc.txt file.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250530160748.2476088-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
and 'ib-mfd-misc-pinctrl-6.17' into ibs-for-mfd-merged
|
|
* arm/smmu/bindings:
dt-bindings: arm-smmu: Remove sdm845-cheza specific entry
dt-bindings: arm-smmu: document the support on Milos
iommu/arm-smmu-qcom: Add SM6115 MDSS compatible
|
|
The GPIO controllers in most Rockchip SoCs are part of power domains
that are always powered on, i.e. PD_BUS or PD_PMU. These always powered
on power domains have typically not been described in the device tree.
Because these power domains have been left out of the device tree there
has not been any real need to properly describe the GPIO controllers
power domain.
On RK3528 the GPIO controllers are spread out among the described
PD_RKVENC, PD_VO and PD_VPU power domains. However, one GPIO controller
belong to an undescribed always powered on power domain.
Add support to describe an optional power-domains for the GPIO
controllers in Rockchip SoCs.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250723085654.2273324-2-jonas@kwiboo.se
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
