| Age | Commit message (Collapse) | Author |
|---|
|
Add smsm node for remoteproc cores.
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Co-developed-by: Luca Weiss <luca@lucaweiss.eu>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250217-msm8226-modem-v5-8-2bc74b80e0ae@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a syscon device node for the TCSR halt regs needed by
modem and other remoteprocs.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250217-msm8226-modem-v5-7-2bc74b80e0ae@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.15:
- New boards support: Variscite VAR-SOM-MX6UL SoM/Concerto, i.MX6
apalis/colibri v1.2, i.MX28 based btt3
- A bunch of TQMa6/7 cleanups from Alexander Stein and Markus Niebel,
ordering DT properties, correcting 3.3V supply, adding partitions
child node to spi-nor, etc.
- A bunch of changes from Fabio Estevam to fix dt-schema warnings on
various boards
- Other small and random changes
* tag 'imx-dt-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
ARM: dts: apalis/colibri-imx6: Add support for v1.2
ARM: dts: apalis/colibri-imx6: Enable STMPE811 TS
ARM: dts: imx6ul: Add Variscite Concerto board support
ARM: dts: imx6ul: Add Variscite VAR-SOM-MX6UL SoM support
ARM: dts: vf610-colibri: Remove compatible from SoM dtsi
ARM: dts: imx6qdl-apalis/colibri: Remove compatible from SoM dtsi
ARM: dts: imx6ul-tqma6ul1: Change include order to disable fec2 node
ARM: dts: imx53-mba53: Fix the PCA9554 compatible
ARM: dts: imx31: Use nand-controller as node name
ARM: dts: vfxxx: Fix the order of the DMA entries
ARM: dts: tqma7: Add partitions subnode to spi-nor
ARM: dts: imx7-tqma7: Add vcc-supply for spi-nor
ARM: dts: tqma6ul: Add partitions subnode to spi-nor
ARM: dts: imx6ul-tqma6ul: Add vcc-supply for spi-nor
ARM: dts: imx6ul-tqma6ul: Order DT properties
ARM: dts: imx6qdl-tqma6: Add partitions subnode to spi-nor
ARM: dts: imx6qdl-tqma6: use sw4_reg as 3.3V supply
ARM: dts: imx6qdl-tqma6: limit PMIC SW4 to 3.3V
ARM: dts: imx6qdl-tqma6: Order DT properties
ARM: dts: imx7d-sdb: Complete WM8960 power supplies
...
Link: https://lore.kernel.org/r/20250312074005.663165-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into soc/dt
TI DaVinci updates for v6.15-rc1
- make GPIO hog names conform to bindings
* tag 'davinci-updates-for-v6.15-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
ARM: dts: ti: davinci: Align GPIO hog name with bindings
Link: https://lore.kernel.org/r/20250311115720.40053-1-brgl@bgdev.pl
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.14, please pull the following:
- Chester fixes the switch port assignments on the ASUS RT-AC3200 and
RT-AC5300 routers
- Phil removes a Device Tree property flagging the BCM2711 ARM timers as
not being configured which would have prevented the use of vDSO on the
Pi 4 running a 32-bit kernel
* tag 'arm-soc/for-6.14/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC5300
ARM: dts: bcm2711: Don't mark timer regs unconfigured
Link: https://lore.kernel.org/r/20250308150528.1900822-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for the thermal sensor (tsens) on the MSM8960 by copying and
modifying the relevant nodes from the APQ8064 dtsi. These changes enable
thermal management.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250227-expressatt-tsens-v4-2-d70afa5a1fd0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Copy bam nodes from qcom-ipq8064.dtsi and change
the reg values to match msm8960.
Co-developed-by: Sam Day <me@samcday.com>
Signed-off-by: Sam Day <me@samcday.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250213-expressatt-bam-v3-1-0ff338f488b2@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Introduce the devicetree for the Plymovent AQM board
(stm32mp151c-plyaqm), based on the STM32MP151 SoC.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250305131425.1491769-5-o.rempel@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add pinmux groups required for the Plymovent AQM board.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250305131425.1491769-4-o.rempel@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/touch controller,
which is EOL, with the TLA2024 ADC and AD7879 touch controller.
Accurately describe the new hardware.
v1.1 of these SoMs is still described by the following DTSI files:
imx6qdl-apalis.dtsi
imx6qdl-colibri.dtsi
v1.2 is now supported by a DTSI that modifies v1.1:
imx6qdl-apalis-v1.2.dtsi
imx6qdl-colibri-v1.2.dtsi
For each carrier board using these modules, a new DTS file was added
that includes the v1.1 DTS and modifies it with this v1.2 DTSI.
The original DTS can be used for modules up to and including v1.1.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable the STMPE811 touchscreen in the SOM dtsi files. The STMPE811 is
part of the SOM. It's self contained within it, therefore, disabling it
is not the correct default behavior.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Variscite Concerto Carrier Board with:
- LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch
display (not configured)
- USB Host + USB OTG Connector
- 10/100 Mbps Ethernet
- miniPCI-Express slot
- SD Card connector
- Audio Headphone/Line In jack connectors
- S-ATA
- On-board DMIC
Product Page: https://www.variscite.com/product/single-board-computers/concerto-board
This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Variscite VAR_SOM-MX6UL SoM with:
- NXP i.MX6 UltraLite SoC
- 128–1024 MB DDR3L
- 8–128 GB eMMC
- 128–512 MB SLC NAND
- Camera Interface
- LVDS / Parallel RGB interfaces (not configured)
- Touch controller (not configured)
- Ethernet RMII interface (not configured)
- On-SoM Wi-Fi/Bluetooth with CYW43353 on SDIO Module (not configured)
- SD/MMC/SDIO interface
- USB Host + USB OTG interface
- I2C interfaces
- SPI interfaces
- PCI-Express 2.0 interface
- on-SoM Audio Codec (not configured)
- S/PDIF interface (not configured)
Product website: https://www.variscite.com/product/system-on-module-som/cortex-a7/var-som-6ul-nxp-imx6ul-6ull-6ulz
Support is handled with a SoM-centric dtsi exporting the default
interfaces along the default pinmuxing to be enabled by the board dts
file.
I tested this on a VAR-SOM-6UL_G2_700C_512R_8N_IT_REV1.3A, which is why
some of the features above are mentioned as "not configured" (I couldn't
test them).
This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SoM cannot be used standalone, this compatible is invalid and it is
always overwritten when this .dtsi file is included, remove it
therefore.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SoM cannot be used standalone, this compatible is invalid and it is
always overwritten when this .dtsi file is included, remove it
therefore.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TQMa6UL1 has only one FEC which needs to be disabled as one of the last
steps.
imx6ul-tqma6ul2.dtsi can't be included in imx6ul-tqma6ul1.dtsi as the
defaults from imx6ul.dtsi will be applied again.
Fixes: 7b8861d8e627 ("ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees")
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
gpio-pca95xx.yaml documents 'nxp,pca9554', so use this compatible
to fix the following dt-schema warning:
failed to match any schema with compatible: ['pca9554']
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to mxc-nand.yaml, the correct node name must be
'nand-controller'.
Change it accordingly to fix the following dt-schema warning:
$nodename:0: 'nand@b8000000' does not match '^nand-controller(@.*)?'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to fsl,dspi.yaml the expected order for describing the dmas
and dma-names properties is "tx" first, followed by "rx".
Adjust it acordingly to fix the following dt-schema warnings:
spi@4002c000: dma-names:0: 'tx' was expected
spi@4002c000: dma-names:1: 'rx' was expected
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present.
Add an empty partitions node which the bootloader will fill with
configured MTD partitions.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
(Q)SPI NOR flash is supplied by 3.3V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present, or in the
spi-nor node itself otherwise.
Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml.
Fix all this by adding an empty partitions node which the bootloader will
fill with configured MTD partitions. Remove the deprecated properties
as well.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
(Q)SPI NOR flash is supplied by 1.8V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
'compatible' and 'reg' are put first.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader may add MTD partitions in this subnode if present.
Add an empty partitions node which the bootloader will fill with
configured MTD partitions. Remove #size-cells from MTD node
because this is deprecated.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This matches the real hardware and allows to remove
the virtual 3.3V regulator.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This is a fixed 3.3V rail supplying several hardware on SOM.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
'compatible' and 'reg' are put first.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
LDO2 is expansion connector supply on STM32MP13xx DHCOR DHSBC rev.200.
LDO5 is carrier board supply on STM32MP13xx DHCOR DHSBC rev.200. Keep
both regulators always enabled to make sure both the carrier board and
the expansion connector is always powered on and supplied with correct
voltage.
Describe ST33TPHF2XSPI TPM 2.0 chip interrupt and reset lines.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20250302152605.54792-1-marex@denx.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Replace the number 2 with the appropriate numerical constant defined in
dt-bindings/interrupt-controller/irq.h.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://lore.kernel.org/r/20250310122402.8795-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
After using the device for a while, Tom reports that he initially described
the switch port labels incorrectly. Apparently, ASUS's own firmware also
describes them incorrectly. Correct them to what is seen on the chassis.
Reported-by: Tom Brautaset <tbrautaset@gmail.com>
Fixes: b116239094d8 ("ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200")
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://lore.kernel.org/r/20250304-for-broadcom-fix-rt-ac3200-switch-ports-v1-1-7e249a19a13e@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
After using the device for a while, Tom reports that he initially described
the switch port labels incorrectly. Correct them.
Reported-by: Tom Brautaset <tbrautaset@gmail.com>
Fixes: 961dedc6b4e4 ("ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300")
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://lore.kernel.org/r/20250303-for-broadcom-fix-rt-ac5300-switch-ports-v1-1-e058856ef4d3@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
During upstream process of Raspberry Pi 4 back in 2019 the ARMv7 stubs
didn't configured the ARM architectural timer. This firmware issue has
been fixed in 2020, which gave users enough time to update their system.
So drop this property to allow the use of the vDSO version of
clock_gettime.
Link: https://github.com/raspberrypi/tools/pull/113
Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250222094113.48198-1-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warnings like:
armada-385-clearfog-gtr-s4.dtb: wifi-disable: $nodename:0: 'wifi-disable' does not match '^.+-hog(-[0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:
kirkwood-openrd-ultimate.dtb: p28: $nodename:0: 'p28' does not match '^.+-hog(-[0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Bind al3000a illuminance sensor found in ASUS TF101
Tested-by: Robert Eckelmann <longnoserob@gmail.com>
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250217140336.107476-4-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Bind DSI devices and MIPI calibration.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-6-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add HDA device binding.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-5-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add ARM PMU node for Tegra114 like it is done for Tegra30 and Tegra124.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-4-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
PLLD is usually used as parent clock for internal video devices, like
DSI for example, while PLLD2 is used as parent for HDMI.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-3-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.15
- Add support for the second and third Ethernet interfaces on the Gray
Hawk Single development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V3U and V4M SoCs,
- Add Watchdog and System Controller support for the RZ/G3E SoC and
the RZ/G3E SMARC Carrier-II EVK development board,
- Add initial support for the Yuridenki-Shokai Kakip and MYIR Remi Pi
boards,
- Add support for the spare UART and PMOD serial ports on the RZ/G3S
SMARC Carrier II board,
- Add a CPU Operating Performance Points table for the RZ/G3S SoC,
- Add boot phase tags on R-Car Gen2/3/4 and RZ/G2 boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
ARM: dts: renesas: r9a06g032: Fix UART dma channel order
arm64: dts: renesas: rzg2: Add boot phase tags
arm64: dts: renesas: rcar: Add boot phase tags
ARM: dts: renesas: rcar-gen2: Add boot phase tags
arm64: dts: renesas: white-hawk-csi-dsi: Use names for CSI-2 data line orders
arm64: dts: renesas: ulcb/kf: Use TDM Split Mode for capture
arm64: dts: renesas: Add initial support for MYIR Remi Pi
arm64: dts: renesas: r9a08g045: Add OPP table
arm64: dts: renesas: r9a09g057: Enable SYS node
arm64: dts: renesas: r9a09g047: Add SYS node
arm64: dts: renesas: r9a08g045: Enable SYS node
arm64: dts: renesas: r8a779f0: Disable rswitch ports by default
arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1
arm64: dts: renesas: rzg3s-smarc: Enable SCIF3
arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches
arm64: dts: renesas: r8a779g0: Restore sort order
arm64: dts: renesas: s4sk: Fix ethernet0 alias for rswitch
arm64: dts: renesas: spider-ethernet: Add ethernetN aliases for rswitch
arm64: dts: renesas: s4sk: Access rswitch ports via phandles
arm64: dts: renesas: spider-ethernet: Access rswitch ports via phandles
...
Link: https://lore.kernel.org/r/cover.1740156747.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.14:
- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
poweroff and iMX8M verdin-dahlia sound-card descriptions
* tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card
arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card
soc: imx8m: Unregister cpufreq and soc dev in cleanup path
ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6
arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply
firmware: imx-scu: fix OF node leak in .probe()
Link: https://lore.kernel.org/r/Z8A+rihFV4K3l8QR@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Set ADC trigger edge type property as interrupt edge rising value.
Signed-off-by: Nayab Sayed <nayabbasha.sayed@microchip.com>
Link: https://lore.kernel.org/r/20250304-sama7g5-hw-trigger-enable-v1-1-61b5618285f0@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-1-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add watchdog timer support for SAMA7D65 SoC.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/05785a34b9181b7debb57c1896cc733bd3088c56.1740675317.git.Ryan.Wanner@microchip.com
[claudiu.beznea: fixed conflict]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Enable shutdown controller to support shutdown and wake up.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/c31c40eb388b2fc0ad6ee17ed2e23bcd04e8e1c8.1740671156.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add SFRBU support to the SAMA7D65 SoC. This is required to change the power
source for backup mode for the SoC.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/dbc51f95f301c106c031fb93f84d0d847e818d91.1740671156.git.Ryan.Wanner@microchip.com
[claudiu.beznea: fixed conflict]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add RTC support for the SAMA7D65 SoC.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/fa1587ffef21a8198317062c15d8eb5c3ca6187c.1740671156.git.Ryan.Wanner@microchip.com
[claudiu.beznea: fixed conflict, keep nodes sorted by their addresses]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add shutdown controller support for SAMA7D65 SoC.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/ffc76b757cd1ba4ca38947f8b30525b848aa8ad7.1740671156.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add Reset Controller support to SAMA7D65 SoC.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/a9620ff11456a1ddfb9c289421606602193ce5b6.1740671156.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
