| Age | Commit message (Collapse) | Author |
|---|
|
Enable SLPI / Sensors DSP present on the SC8280XP platforms / Lenovo
X13s laptop.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-4-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SC8280XP features a SLPI (Sensor Low Power Island) core. Describe it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-3-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Certain /soc@0 subnodes are very out of order. Reshuffle them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-2-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable cpufreq on X1E80100 SoCs through the SCMI perf protocol node.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241030130840.2890904-3-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the cpucp mailbox and sram nodes required by SCMI perf protocol
on X1E80100 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241030130840.2890904-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Jens reported that the sanity checks added to the new ps883x USB retimer
driver breaks USB and display on the HP X14. Turns out the X14 only has
a retimer on one of the ports, but this initially went unnoticed due to
the missing sanity check (and error handling) in the retimer driver.
Drop the non-existing retimer from the devicetree to enable the second
USB port and the display subsystem.
Note that this also matches the ACPI tables.
Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Cc: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250328084154.16759-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On Lenovo ThinkPad T14s, the headset is connected via a HiFi mux to
support CTIA and OMTP headsets. This switch is used to minimise pop and
click during headset type switching.
Enable the mux controls required to power this switch along with wiring up
gpio that control the headset switching.
Without this, headset audio will be very noisy and might see headset
detection errors.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250327100633.11530-7-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable PCIe5 and the SDX62 modem present on some T14s.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250327081427.19693-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
BSS might be uninitialized when entering the startup code, so forbid the
use by the startup code of any variables that live after __bss_start in
the linker map.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-8-ardb+git@google.com
[will: Drop export of 'memstart_offset_seed', as this has been removed]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Accessing BSS will no longer be permitted from the startup code in
arch/arm64/kernel/pi, as some of it executes before BSS is cleared.
Clearing BSS earlier would involve managing cache coherency explicitly
in software, which is a hassle we prefer to avoid.
So move some variables that are assigned by the startup code out of BSS
and into .data.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-7-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
init_pgdir[] is only referenced from the startup code, but lives after
BSS in the linker map. Before tightening the rules about accessing BSS
from startup code, move init_pgdir[] into the __pi_ namespace, so it
does not need to be exported explicitly.
For symmetry, do the same with init_idmap_pgdir[], although it lives
before BSS.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-6-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The values stored in __boot_cpu_mode were changed without updating the
comment. Rectify that.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20250513124525.677736-1-ben.horgan@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
pmd_val(pmd) is redundant because a positive pmd_present(pmd) ensures
a positive pmd_val(pmd) according to their definitions like below.
#define pmd_val(x) ((x).pmd)
#define pmd_present(pmd) pte_present(pmd_pte(pmd))
#define pte_present(pte) (pte_valid(pte) || pte_present_invalid(pte))
#define pte_valid(pte) (!!(pte_val(pte) & PTE_VALID))
#define pte_present_invalid(pte) \
((pte_val(pte) & (PTE_VALID | PTE_PRESENT_INVALID)) == PTE_PRESENT_INVALID)
pte_present() can't be positive unless either of the flag PTE_VALID or
PTE_PRESENT_INVALID is set. In this case, pmd_val(pmd) should be positive
either.
So lets drop the redundant check pmd_val(pmd) and no functional changes
intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250508085251.204282-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
mov_q cannot really move PIE_E[0|1] macros into a general purpose register
as expected if those macro constants contain some 128 bit layout elements,
that are required for D128 page tables. The primary issue is that for D128,
PIE_E[0|1] are defined in terms of 128-bit types with shifting and masking,
which the assembler can't accommodate.
Instead pre-calculate these PIRE0_EL1/PIR_EL1 constants into asm-offsets.h
based PIE_E0_ASM/PIE_E1_ASM which can then be used in arch/arm64/mm/proc.S.
While here also drop PTE_MAYBE_NG/PTE_MAYBE_SHARED assembly overrides which
are not required any longer, as the compiler toolchains are smart enough to
compute both the PIE_[E0|E1]_ASM constants in all scenarios.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250429050511.1663235-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In the case of ICH_LR<n>.HW == 1, bit 41 of LR is just a part of pINTID
without EOI meaning, and bit 41 will be zeroed by the subsequent clearing
of ICH_LR_PHYS_ID_MASK anyway.
No functional changes intended.
Signed-off-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Link: https://lore.kernel.org/r/20250512133223.866999-1-r09922117@csie.ntu.edu.tw
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
If MTE_frac is masked out unconditionally then the guest will always
see ID_AA64PFR1_EL1_MTE_frac as 0. However, a value of 0 when
ID_AA64PFR1_EL1_MTE is 2 indicates that MTE_ASYNC is supported. Hence, for
a host with ID_AA64PFR1_EL1_MTE==2 and ID_AA64PFR1_EL1_MTE_frac==0xf
(MTE_ASYNC unsupported) the guest would see MTE_ASYNC advertised as
supported whilst the host does not support it. Hence, expose the sanitised
value of MTE_frac to the guest and user-space.
As MTE_frac was previously hidden, always 0, and KVM must accept values
from KVM provided by user-space, when ID_AA64PFR1_EL1.MTE is 2 allow
user-space to set ID_AA64PFR1_EL1.MTE_frac to 0. However, ignore it to
avoid incorrectly claiming hardware support for MTE_ASYNC in the guest.
Note that linux does not check the value of ID_AA64PFR1_EL1_MTE_frac and
wrongly assumes that MTE async faults can be generated even on hardware
that does nto support them. This issue is not addressed here.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Link: https://lore.kernel.org/r/20250512114112.359087-3-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM exposes the sanitised ID registers to guests. Currently these ignore
the ID_AA64PFR1_EL1.MTE_frac field, meaning guests always see a value of
zero.
This is a problem for platforms without the MTE_ASYNC feature where
ID_AA64PFR1_EL1.MTE==0x2 and ID_AA64PFR1_EL1.MTE_frac==0xf. KVM forces
MTE_frac to zero, meaning the guest believes MTE_ASYNC is supported, when
no async fault will ever occur.
Before KVM can fix this, the architecture needs to sanitise the ID
register field for MTE_frac.
Linux itself does not use MTE_frac field and just assumes MTE async faults
can be generated if MTE is supported.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Link: https://lore.kernel.org/r/20250512114112.359087-2-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The NanoPi R5S has 4 GPIO LEDs, a RED one for SYStem power and 3 green
LEDs meant to indicate that a cable is connected to either of the
2.5GbE LAN ports or the 1GbE WAN port.
In the NanoPi R5S schematic (2204; page 19) as well as on the PCB and on
the case, SYS is used and not POWER. So replace 'power' with 'sys'.
But keep the 'power_led' label/phandle even though the kernel doesn't
use it, but it may be used outside of it.
The SYStem LED already had "heartbeat" as its default-trigger.
Set the default-trigger to "netdev" for the NICs so they will show when
LAN1/LAN2/WAN is connected and set their default-state to "off".
Also assign labels as close as possible to the labels on the case, while
still being descriptive enough in their own right.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250513170056.96259-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
PP1516 are Touchscreen devices built around the PX30 SoC and companion
devices to PX30-Cobra, again with multiple display options.
The devices feature an EMMC, OTG port and a 720x1280 display with a
touchscreen and camera
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250514150745.2437804-7-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Cobra are Touchscreen devices built around the PX30 SoC using
a variety of display options.
The devices feature an EMMC, network port, usb host + OTG ports and
a 720x1280 display with a touchscreen.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250514150745.2437804-5-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Using snps,reset-* properties to handle the ethernet-phy resets is
deprecated and instead a real phy node should be used.
Move the Ringneck phy-reset properties to such a node
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250514150745.2437804-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Using snps,reset-* properties for handling the phy-reset is deprecated
and instead a real phy node should be defined that then contains the
reset-gpios handling.
To facilitate this, add the core mdio node under the px30's gmac, similar
to how the other Rockchip socs already do this.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250514150745.2437804-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Puma with Haikou
The u2phy0_host port is the part of the USB PHY0 (namely the
HOST0_DP/DM lanes) which routes directly to the USB2.0 HOST
controller[1]. The other lanes of the PHY are routed to the USB3.0 OTG
controller (dwc3), which we do use.
The HOST0_DP/DM lanes aren't routed on RK3399 Puma so let's simply
disable the USB2.0 controllers.
USB3 OTG has been known to be unstable on RK3399 Puma Haikou for a
while, one of the recurring issues being that only USB2 is detected and
not USB3 in host mode. Reading the justification above and seeing that
we are keeping u2phy0_host in the Haikou carrierboard DTS probably may
have bothered you since it should be changed to u2phy0_otg. The issue is
that if it's switched to that, USB OTG on Haikou is entirely broken. I
have checked the routing in the Gerber file, the lanes are going to the
expected ball pins (that is, NOT HOST0_DP/DM).
u2phy0_host is for sure the wrong part of the PHY to use, but it's the
only one that works at the moment for that board so keep it until we
figure out what exactly is broken.
No intended functional change.
[1] https://rockchip.fr/Rockchip%20RK3399%20TRM%20V1.3%20Part2.pdf
Chapter 2 USB2.0 PHY
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-5-4a76a474a010@thaumatec.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The u2phy1_host port is the part of the USB PHY1 (namely the
HOST1_DP/DM lanes) which routes directly to the USB2.0 HOST
controller[1]. The other lanes of the PHY are routed to the USB3.0 OTG
controller (dwc3), which we do use.
The HOST1_DP/DM lanes aren't routed on RK3399 Puma so let's simply
disable the USB2.0 controllers and associated part in USB2.0 PHY.
No intended functional change.
[1] https://rockchip.fr/Rockchip%20RK3399%20TRM%20V1.3%20Part2.pdf
Chapter 2 USB2.0 PHY
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-4-4a76a474a010@thaumatec.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Currently, the onboard Cypress CYUSB3304 USB hub is not defined in
the device tree, and hub reset pin is provided as vcc5v0_host
regulator to usb phy. This causes instability issues, as a result
of improper reset duration.
The fixed regulator device requests the GPIO during probe in its
inactive state (except if regulator-boot-on property is set, in
which case it is requested in the active state). Considering gpio
is GPIO_ACTIVE_LOW for Puma, it means it’s driving it high. Then
the regulator gets enabled (because regulator-always-on property),
which drives it to its active state, meaning driving it low.
The Cypress CYUSB3304 USB hub actually requires the reset to be
asserted for at least 5 ms, which we cannot guarantee right now
since there's no delay in the current config, meaning the hub may
sometimes work or not. We could add delay as offered by
fixed-regulator but let's rather fix this by using the proper way
to model onboard USB hubs.
Define hub_2_0 and hub_3_0 nodes, as the onboard Cypress hub
consist of two 'logical' hubs, for USB2.0 and USB3.0.
Use the 'reset-gpios' property of hub to assign reset pin instead
of using regulator. Rename the vcc5v0_host regulator to
cy3304_reset to be more meaningful. Pin is configured to
output-high by default, which sets the hub in reset state
during pin controller initialization. This allows to avoid double
enumeration of devices in case the bootloader has setup the USB
hub before the kernel.
The vdd-supply and vdd2-supply properties in hub nodes are
added to provide correct dt-bindings, although power supplies are
always enabled based on HW design.
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Cc: stable@vger.kernel.org # 6.6
Cc: stable@vger.kernel.org # Backport of the patch in this series fixing product ID in onboard_dev_id_table in drivers/usb/misc/onboard_usb_dev.c driver
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-3-4a76a474a010@thaumatec.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Even though they will be the same for all boards, i2c and uart aliases
are supposed to live in the individual board files, to not create
aliases for disabled nodes.
So move the newly added aliases for rk3528 over to the Radxa E20C board,
which is the only rk3528 board right now.
Fixes: d3a05f490d04 ("arm64: dts: rockchip: Add I2C controllers for RK3528")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250510220106.2108414-1-heiko@sntech.de
|
|
Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It
seems to be using the same baseboard as the HP OmniBook X 14 so just use
that for now.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Link: https://lore.kernel.org/r/20250429144957.2088284-4-juerg.haefliger@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a label to the sound node to make it easier to override from other
nodes.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Link: https://lore.kernel.org/r/20250429144957.2088284-2-juerg.haefliger@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Only two little a520s share the same L2, every a720 has their own L2
cache.
Fixes: d2350377997f ("arm64: dts: qcom: add initial SM8650 dtsi")
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250405105529.309711-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Qualcomm X Elite Devkit has 2 USB-A ports, both connected to the USB
multiport controller, each one via a separate NXP PTN3222 eUSB2-to-USB2
redriver to the eUSB2 PHY for High-Speed support, with a dedicated QMP
PHY for SuperSpeed support.
Describe each redriver and then enable each pair of PHYs and the
USB controller itself, in order to enable support for the 2 USB-A ports.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250324-x1e001de-devkit-dts-enable-usb-a-ports-v1-1-81153b2d1edf@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add DTS support for Qualcomm qcs6490-rb3gen2 industrial mezzanine board.
Signed-off-by: Sahil Chandna <quic_chandna@quicinc.com>
Signed-off-by: Nirmesh Kumar Singh <quic_nkumarsi@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250323123333.1622860-1-quic_nkumarsi@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit d37e2646c8a5 ("arm64: dts: qcom: x1e80100-pmics: Enable all SMB2360
separately") disables all SMB2360s and let the board DTS explicitly enable
them. The HP OmniBook DTS is from before this change and is missing the
explicit enabling. Add that to get all USB root ports.
Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Cc: stable@vger.kernel.org # 6.14
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250319160509.1812805-1-juerg.haefliger@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable support for download mode to collect RAM dumps in case of a
system crash, allowing post mortem analysis.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250512-ipq5018-syscon-v1-2-eb1ad2414c3c@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable Venus on Lenovo Miix 630 and specify corresponding firmware file.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20250425-miix-630-venus-v2-1-cdfca385a0c8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the PCIe controller and PHY nodes for RDP 432-c2.
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20250514-ipq5018-pcie-v10-2-5b42a8eff7ea@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add phy and controller nodes for a 2-lane Gen2 and
a 1-lane Gen2 PCIe bus. IPQ5018 has 8 MSI SPI interrupts and
one global interrupt.
NOTE: the PCIe controller supports gen3, yet the phy is limited to gen2.
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Signed-off-by: Sricharan R <quic_srichara@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20250514-ipq5018-pcie-v10-1-5b42a8eff7ea@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
There is a typo in sm8350.dts where the node label
mmeory@85200000 should be memory@85200000.
This patch corrects the typo for clarity and consistency.
Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250514114656.2307828-1-alok.a.tiwari@oracle.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Both ports seem to work, just like on other X1E laptops.
Tested with a Type-C-to-HDMI2.0 dock (translating into up to 2 DP lanes
worth of bandwidth).
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250514-topic-romu_dp-v1-1-6242d6acb5e5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These all address issues in devicetree files:
- The Rockchip rk3588j are now limited the same way as the vendor
kernel, to allow room for the industrial-grade temperature ranges.
- Seven more Rockchip fixes address minor issues with specific boards
- Invalid clk controller references in multiple amlogic chips, plus
one accidentally disabled audio on clock
- Two devicetree fixes for i.MX8MP boards, both for incorrect
regulator settings
- A power domain change for apple laptop touchbar, fixing
suspend/resume problems
- An incorrect DMA controller setting for sophgo cv18xx chips"
* tag 'soc-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: amazon: Fix simple-bus node name schema warnings
MAINTAINERS: delete email for Shiraz Hashim
arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeout
arm64: dts: imx8mp: use 800MHz NoC OPP for nominal drive mode
arm64: dts: amlogic: dreambox: fix missing clkc_audio node
riscv: dts: sophgo: fix DMA data-width configuration for CV18xx
arm64: dts: rockchip: fix Sige5 RTC interrupt pin
arm64: dts: rockchip: Assign RT5616 MCLK rate on rk3588-friendlyelec-cm3588
arm64: dts: rockchip: Align wifi node name with bindings in CB2
arm64: dts: amlogic: g12: fix reference to unknown/untested PWM clock
arm64: dts: amlogic: gx: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8b: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8: fix reference to unknown/untested PWM clock
arm64: dts: apple: touchbar: Mark ps_dispdfr_be as always-on
mailmap: Update email for Asahi Lina
arm64: dts: rockchip: Fix mmc-pwrseq clock name on rock-pi-4
arm64: dts: rockchip: Use "regulator-fixed" for btreg on px30-engicam for vcc3v3-btreg
arm64: dts: rockchip: Add pinmuxing for eMMC on QNAP TS433
arm64: dts: rockchip: Remove overdrive-mode OPPs from RK3588J SoC dtsi
arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down
|
|
Add nodes for the DMAC IPs found on the Renesas RZ/V2H(P) SoC.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250423143422.3747702-7-fabrizio.castro.jz@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The H-A133L board is an industrial development board made by Liontron.
It contains a number of dedicated JST connectors, to connect external
peripherals. It features:
- Allwinner A133 SoC (4 * Arm Cortex-A53 cores at up to 1.6 GHz)
- 1 GiB, 2 GiB or 4 GiB of LPDDR4 DRAM
- between 16 and 128 GiB eMMC flash
- AXP707 PMIC (compatible to AXP803)
- 100 Mbit/s RJ45 Ethernet socket, using an JLSemi JL1101 PHY
- XR829 WIFI+Bluetooth chip
- 2 * USB 2.0 USB-A ports, plus three sets of USB pins on connectors
(connected via a USB hub connected to USB1 on the SoC)
- microSD card slot
- 3.5mm A/V port
- 12V power supply
- connectors for an LVDS or MIPI-DSI panel
Add the devicetree describing the board's peripherals and their
connections.
Despite being a devboard, the manufacturer does not publish a schematic
(I asked), so the PMIC rail assignments were bases on BSP dumps,
educated guesses and some experimentation. Dropping the always-on
property from any of the rails carrying it will make the board hang as
soon as the kernel turns off unused regulators.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250505164729.18175-4-andre.przywara@arm.com
[wens@csie.org: fix property in &usbphy; fix comment typo in &usb_otg]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Enable the missing configs to get all devices on the MediaTek Genio
1200, 700, 510 and 350 EVK boards probing, as indicated by the DT
kselftest.
This includes support for:
Genio 1200/700/510/350:
* MT6359/MT6357 PMICs Auxiliary ADC
Genio 1200/700/510:
* MDP3 (video scaling and color space conversion IP block)
* ITE IT5205 Type-C USB Alternate Mode Passive MUX
* Himax HX8279 controller based KD070FHFID078 DSI panel
Genio 700/510:
* Richtek RT1715 USB Type-C PD Controller
Genio 1200:
* MediaTek PCIe PHY
* Mediatek MT6360 USB Type-C Port Controller
Genio 350:
* STARTEK KD070FHFID015 DSI panel
* MediaTek UART DMA controller (APDMA)
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250513-genio-defconfig-v1-1-c3862f91b6b2@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The mediatek display driver fails to probe on mt8173-elm-hana and
mt8183-kukui-jacuzzi-juniper-sku16 in v6.14-rc4 due to missing PHY
configurations.
Commit 924d66011f24 ("drm/mediatek: stop selecting foreign drivers")
stopped selecting the MediaTek PHY drivers, requiring them to be
explicitly enabled in defconfig.
Enable the following PHY drivers for MediaTek platforms:
CONFIG_PHY_MTK_HDMI=m for HDMI display
CONFIG_PHY_MTK_MIPI_DSI=m for DSI display
CONFIG_PHY_MTK_DP=m for DP display
Fixes: 924d66011f24 ("drm/mediatek: stop selecting foreign drivers")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Link: https://lore.kernel.org/r/20250512131933.1247830-1-vignesh.raman@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
lazy_mmu_mode is not supposed to permit nesting. But in practice this
does happen with CONFIG_DEBUG_PAGEALLOC, where a page allocation inside
a lazy_mmu_mode section (such as zap_pte_range()) will change
permissions on the linear map with apply_to_page_range(), which
re-enters lazy_mmu_mode (see stack trace below).
The warning checking that nesting was not happening was previously being
triggered due to this. So let's relax by removing the warning and
tolerate nesting in the arm64 implementation. The first (inner) call to
arch_leave_lazy_mmu_mode() will flush and clear the flag such that the
remainder of the work in the outer nest behaves as if outside of lazy
mmu mode. This is safe and keeps tracking simple.
Code review suggests powerpc deals with this issue in the same way.
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1 at arch/arm64/include/asm/pgtable.h:89 __apply_to_page_range+0x85c/0x9f8
Modules linked in: ip_tables x_tables ipv6
CPU: 6 UID: 0 PID: 1 Comm: systemd Not tainted 6.15.0-rc5-00075-g676795fe9cf6 #1 PREEMPT
Hardware name: QEMU KVM Virtual Machine, BIOS 2024.08-4 10/25/2024
pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __apply_to_page_range+0x85c/0x9f8
lr : __apply_to_page_range+0x2b4/0x9f8
sp : ffff80008009b3c0
x29: ffff80008009b460 x28: ffff0000c43a3000 x27: ffff0001ff62b108
x26: ffff0000c43a4000 x25: 0000000000000001 x24: 0010000000000001
x23: ffffbf24c9c209c0 x22: ffff80008009b4d0 x21: ffffbf24c74a3b20
x20: ffff0000c43a3000 x19: ffff0001ff609d18 x18: 0000000000000001
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000003
x14: 0000000000000028 x13: ffffbf24c97c1000 x12: ffff0000c43a3fff
x11: ffffbf24cacc9a70 x10: ffff0000c43a3fff x9 : ffff0001fffff018
x8 : 0000000000000012 x7 : ffff0000c43a4000 x6 : ffff0000c43a4000
x5 : ffffbf24c9c209c0 x4 : ffff0000c43a3fff x3 : ffff0001ff609000
x2 : 0000000000000d18 x1 : ffff0000c03e8000 x0 : 0000000080000000
Call trace:
__apply_to_page_range+0x85c/0x9f8 (P)
apply_to_page_range+0x14/0x20
set_memory_valid+0x5c/0xd8
__kernel_map_pages+0x84/0xc0
get_page_from_freelist+0x1110/0x1340
__alloc_frozen_pages_noprof+0x114/0x1178
alloc_pages_mpol+0xb8/0x1d0
alloc_frozen_pages_noprof+0x48/0xc0
alloc_pages_noprof+0x10/0x60
get_free_pages_noprof+0x14/0x90
__tlb_remove_folio_pages_size.isra.0+0xe4/0x140
__tlb_remove_folio_pages+0x10/0x20
unmap_page_range+0xa1c/0x14c0
unmap_single_vma.isra.0+0x48/0x90
unmap_vmas+0xe0/0x200
vms_clear_ptes+0xf4/0x140
vms_complete_munmap_vmas+0x7c/0x208
do_vmi_align_munmap+0x180/0x1a8
do_vmi_munmap+0xac/0x188
__vm_munmap+0xe0/0x1e0
__arm64_sys_munmap+0x20/0x38
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x4c/0x16c
el0t_64_sync_handler+0x10c/0x140
el0t_64_sync+0x198/0x19c
irq event stamp: 281312
hardirqs last enabled at (281311): [<ffffbf24c780fd04>] bad_range+0x164/0x1c0
hardirqs last disabled at (281312): [<ffffbf24c89c4550>] el1_dbg+0x24/0x98
softirqs last enabled at (281054): [<ffffbf24c752d99c>] handle_softirqs+0x4cc/0x518
softirqs last disabled at (281019): [<ffffbf24c7450694>] __do_softirq+0x14/0x20
---[ end trace 0000000000000000 ]---
Fixes: 5fdd05efa1cd ("arm64/mm: Batch barriers when updating kernel mappings")
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Closes: https://lore.kernel.org/linux-arm-kernel/aCH0TLRQslXHin5Q@arm.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250512150333.5589-1-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit 5fdd05efa1cd ("arm64/mm: Batch barriers when updating kernel
mappings") enabled arm64 kernels to track "lazy mmu mode" using TIF
flags in order to defer barriers until exiting the mode. At the same
time, it added warnings to check that pte manipulations were never
performed in interrupt context, because the tracking implementation
could not deal with nesting.
But it turns out that some debug features (e.g. KFENCE, DEBUG_PAGEALLOC)
do manipulate ptes in softirq context, which triggered the warnings.
So let's take the simplest and safest route and disable the batching
optimization in interrupt contexts. This makes these users no worse off
than prior to the optimization. Additionally the known offenders are
debug features that only manipulate a single PTE, so there is no
performance gain anyway.
There may be some obscure case of encrypted/decrypted DMA with the
dma_free_coherent called from an interrupt context, but again, this is
no worse off than prior to the commit.
Some options for supporting nesting were considered, but there is a
difficult to solve problem if any code manipulates ptes within interrupt
context but *outside of* a lazy mmu region. If this case exists, the
code would expect the updates to be immediate, but because the task
context may have already been in lazy mmu mode, the updates would be
deferred, which could cause incorrect behaviour. This problem is avoided
by always ensuring updates within interrupt context are immediate.
Fixes: 5fdd05efa1cd ("arm64/mm: Batch barriers when updating kernel mappings")
Reported-by: syzbot+5c0d9392e042f41d45c5@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-arm-kernel/681f2a09.050a0220.f2294.0006.GAE@google.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250512102242.4156463-1-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
make dtbs:
arch/arm64/boot/dts/renesas/r8a779g0.dtsi:1269.24-1283.5: Warning (spi_bus_bridge): /soc/spi@e6ea0000: incorrect #address-cells for SPI bus
also defined at arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts:471.9-486.3
arch/arm64/boot/dts/renesas/r8a779g0.dtsi:1269.24-1283.5: Warning (spi_bus_bridge): /soc/spi@e6ea0000: incorrect #size-cells for SPI bus
also defined at arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts:471.9-486.3
arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
The Sparrow Hawk uses the MSIOF module in I2S mode instead of SPI mode,
triggering a conflict between the SPI bus bindings and dtc:
- Serial engines that can be SPI controllers must use "spi" as their
node names,
- Dtc assumes nodes named "spi" are always SPI controllers.
Fix this by disabling this specific warning for this board.
Fixes: ca764d5321a2cee7 ("arm64: dts: renesas: sparrow-hawk: Add MSIOF Sound support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/20250506192033.77338015@canb.auug.org.au
Suggested-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/fbad3581f297d5b95a3b2813bbae7dba25a523fd.1747039399.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The two alarm LEDs of on the uDPU board are stopped working since
commit 78efa53e715e ("leds: Init leds class earlier").
The LEDs are driven by the GPIO{15,16} pins of the North Bridge
GPIO controller. These pins are part of the 'spi_quad' pin group
for which the 'spi' function is selected via the default pinctrl
state of the 'spi' node. This is wrong however, since in order to
allow controlling the LEDs, the pins should use the 'gpio' function.
Before the commit mentined above, the 'spi' function is selected
first by the pinctrl core before probing the spi driver, but then
it gets overridden to 'gpio' implicitly via the
devm_gpiod_get_index_optional() call from the 'leds-gpio' driver.
After the commit, the LED subsystem gets initialized before the
SPI subsystem, so the function of the pin group remains 'spi'
which in turn prevents controlling of the LEDs.
Despite the change of the initialization order, the root cause is
that the pinctrl state definition is wrong since its initial commit
0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board"),
To fix the problem, override the function in the 'spi_quad_pins'
node to 'gpio' and move the pinctrl state definition from the
'spi' node into the 'leds' node.
Cc: stable@vger.kernel.org # needs adjustment for < 6.1
Fixes: 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
When the guest executes an AT S1E{0,1} from EL2, and that its
HCR_EL2.{E2H,TGE}=={1,1}, then this is a pure S1 translation
that doesn't involve a guest-supplied S2, and the full S1
context is already in place. This allows us to take a shortcut
and avoid save/restoring a bunch of registers.
However, we set HCR_EL2 to a value suitable for the use of AT
in guest context. And we do so by using the value that we saved.
Or not. In the case described above, we restore whatever junk
was on the stack, and carry on with it until the next entry.
Needless to say, this is completely broken.
But this also triggers the realisation that saving HCR_EL2 is
a bit pointless. We are always in host context at the point where
reach this code, and what we program to enter the guest is a known
value (vcpu->arch.hcr_el2).
Drop the pointless save/restore, and wrap the AT operations with
writes that switch between guest and host values for HCR_EL2.
Reported-by: D Scott Phillips <scott@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250422122612.2675672-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
It appears that our S1 PTW is completely oblivious of access faults.
Teach the S1 translation code about it.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20250422122612.2675672-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When an AT S1E* operation fails, we need to report whether the
translation failed at S2, and whether this was during a S1 PTW.
But these two bits are not independent. PAR_EL1.PTW can only be
set of PAR_EL1.S is also set, and PAR_EL1.S can only be set on
its own when the full S1 PTW has succeeded, but that the access
itself is reporting a fault at S2.
As a result, it makes no sense to carry both ptw and s2 as parameters
to fail_s1_walk(), and they should be unified.
This fixes a number of cases where we were reporting PTW=1 *and*
S=0, which makes no sense.
Link: https://lore.kernel.org/r/20250422122612.2675672-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
