summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2019-10-01ARM: dts: qcom: ipq4019: Add SDHCI controller nodeRobert Marko
IPQ4019 has a built in SD/eMMC controller which is supported by the SDHCI MSM driver, by the "qcom,sdhci-msm-v4" binding. So lets add the appropriate node for it. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-01arm: xen: mm: use __GPF_DMA32 for arm64Peng Fan
arm64 shares some code under arch/arm/xen, including mm.c. However ZONE_DMA is removed by commit ad67f5a6545("arm64: replace ZONE_DMA with ZONE_DMA32"). So add a check if CONFIG_ZONE_DMA32 is enabled use __GFP_DMA32. Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2019-10-02ARM: dts: imx6qdl-udoo: Add Pincfgs for OTGMarkus Kueffner
Add Pincfgs to enable the i.MX6's OTG feature for UDOO Signed-off-by: Markus Kueffner <kueffner.markus@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6ull-colibri: Add general wakeup key used on ColibriPhilippe Schenker
This adds the possibility to wake the module with an external signal as defined in the Colibri standard Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6ull: improve can templatesMax Krummenacher
Add the pinmuxing and a inactive node for flexcan1 on SODIMM 55/63 and move the inactive flexcan nodes to imx6ull-colibri-eval-v3.dtsi where they belong. Note that this commit does not enable flexcan functionality, but rather eases the effort needed to do so. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6ull-colibri: Add watchdogPhilippe Schenker
This patch adds the watchdog to the imx6ull-colibri devicetree Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6ull-colibri: reduce v_batt current in power offMax Krummenacher
Reduce the current drawn from VCC_BATT when the main power on the 3V3 pins to the module are switched off. This switches off SoC internal pull resistors which are provided on the module for TAMPER7 and TAMPER9 SoC pin and switches on a pull down instead of a pullup for the USBC_DET module pin (TAMPER2). Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6ull-colibri: Add sleep mode to fecPhilippe Schenker
Do not change the clock as the power for this phy is switched with that clock. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6-colibri: Add missing pinmuxing to Toradex eval boardPhilippe Schenker
This patch adds some missing pinmuxing that is in the colibri standard to the dts. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6-apalis: Add touchscreens used on Toradex eval boardsPhilippe Schenker
This commit adds the touchscreen from Toradex so one can enable it. It is disabled by default because the pins are also used for PWM<B>, PWM<C>, aka pwm2, pwm3 which is the standard use for colibri boards. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6qdl-apalis: Add sleep state to can interfacesPhilippe Schenker
This patch prepares the devicetree for the new Ixora V1.2 where we are able to turn off the supply of the can transceiver. This implies to use a sleep state on transmission pins in order to prevent backfeeding. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxcPhilippe Schenker
This adds the muxing for the optional pins usb-oc (overcurrent) and usb-id. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx7-colibri: Add touch controllersPhilippe Schenker
Add touch controller that is connected over an I2C bus. It is disabled by default because the pins are also used for PWM, which is the standard use for colibri boards. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx7-colibri: fix 1.8V/UHS supportStefan Agner
Add pinmuxing and do not specify voltage restrictions for the usdhc instance available on the modules edge connector. This allows to use SD-cards with higher transfer modes if supported by the carrier board. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx7-colibri: add GPIO wakeup keyStefan Agner
Add wakeup GPIO key which is able to wake the system from sleep modes (e.g. Suspend-to-Memory). Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx7ulp: remove mipi pll clock nodeFancy Fang
According to the IMX7ULP reference manual, the mipi pll clock comes from the MIPI PHY PLL output. So it should not be defined as a fixed clock. So remove this clock node and all the references to it. Signed-off-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: vf610-zii-scu4-aib: Drop "rs485-rts-delay" propertyAndrey Smirnov
LPUART driver does not support specifying "rs485-rts-delay" property. Drop it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: opos6ul/opos6uldev: rework device tree to support i.MX6ULLSébastien Szymanski
Rework the device trees of the OPOS6UL and OPOS6ULDev boards to support the OPOS6UL SoM with an i.MX6ULL SoC. The device trees are now as following: - imx6ul-imx6ull-opos6ul.dtsi common for both i.MX6UL and i.MX6ULL OPOS6UL SoM. - imx6ul-opos6ul.dtsi for i.MX6UL OPOS6UL SoM. It includes imx6ul.dtsi and imx6ul-imx6ull-opos6ul.dtsi. - imx6ull-opos6ul.dtsi for i.MX6ULL OPOS6UL SoM. It includes imx6ull.dtsi and imx6ul-imx6ull-opos6ul.dtsi. - imx6ul-imx6ull-opos6uldev.dtsi OPOS6ULDev base device tree. - imx6ul-opos6uldev.dts OPOS6ULDev board with an i.MX6UL OPOS6UL SoM. It includes imx6ul-opos6ul.dtsi and imx6ul-imx6ull-opos6uldevdtsi. - imx6ull-opos6uldev.dts OPOS6ULDev board with an i.MX6ULL OPOS6UL SoM. It includes imx6ull-opos6ul.dtsi and imx6ul-imx6ull-opos6uldevdtsi. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-01ARM: xen: unexport HYPERVISOR_platform_op functionStefano Stabellini
HYPERVISOR_platform_op() is an inline function and should not be exported. Since commit 15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions"), this causes a warning: WARNING: "HYPERVISOR_platform_op" [vmlinux] is a static EXPORT_SYMBOL_GPL Instead, export the underlying function called by the static inline: HYPERVISOR_platform_op_raw. Fixes: 15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2019-10-01ARM: dts: exynos: Add DMC device to Exynos5422 and Odroid XU3-family boardsLukasz Luba
Add description of Dynamic Memory Controller and PPMU counters to Exynos5422 and Odroid XU3/XU4/HC1 boards. They are used by exynos5422-dmc driver. There is a definition of the memory chip, which is then used during calculation of timings for each OPP. The algorithm in the driver needs these two sets to bound the timings. Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-01ARM: dts: exynos: Add syscon compatible to clock controller on Exynos542xLukasz Luba
In order to get the clock by phandle and use it with regmap it needs to be compatible with syscon. The DMC driver uses two registers from clock register set and needs the regmap of them. Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-01ARM: dts: ux500: Fix up the CPU thermal zoneLinus Walleij
This fixes up the default ux500 CPU thermal zone: - Set polling delay to 0 and explain why - Set passive polling delay to 250 - Remove restrictions from the CPU cooling device, we should use all cpufreq steps to cool down if needed. Link: https://lore.kernel.org/r/20191001074628.8122-1-linus.walleij@linaro.org Fixes: b786a05f6ce4 ("ARM: dts: ux500: Update thermal zone") Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-01crypto: arm/aes-ce - add dependency on AES libraryArd Biesheuvel
The ARM accelerated AES driver depends on the new AES library for its non-SIMD fallback so express this in its Kconfig declaration. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-01crypto: arm/aes-ce - build for v8 architecture explicitlyArd Biesheuvel
The NEON/Crypto Extensions based AES implementation for 32-bit ARM can be built in a kernel that targets ARMv6 CPUs and higher, even though the actual code will not be able to run on that generation, but it allows for a portable image to be generated that can will use the special instructions only when they are available. Since those instructions are part of a FPU profile rather than a CPU profile, we don't override the architecture in the assembler code, and most of the scalar code is simple enough to be ARMv6 compatible. However, that changes with commit c61b1607ed4fbbf2, which introduces calls to the movw/movt instructions, which are v7+ only. So override the architecture in the .S file to armv8-a, which matches the architecture specification in the crypto-neon-fp-armv8 FPU specificier that we already using. Note that using armv7-a here may trigger an issue with the upcoming Clang 10 release, which no longer permits .arch/.fpu combinations it views as incompatible. Reported-by: kbuild test robot <lkp@intel.com> Fixes: c61b1607ed4fbbf2 ("crypto: arm/aes-ce - implement ciphertext stealing ...") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-01ARM: dts: emev2: Add whitespace for GPIO nodesMagnus Damm
It turns out that the GPIO nodes for EMEV2 are missing whitespace, so focus on what is important in life and adjust the coding style to match the rest of the code base. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Link: https://lore.kernel.org/r/156877169225.29395.9771334507494949542.sendpatchset@octo Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-10-01ARM: dts: lager: Replace spaces by TABsGeert Uytterhoeven
Make it easier to compare the file with other similar files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Link: https://lore.kernel.org/r/20190904120114.1894-3-geert+renesas@glider.be
2019-10-01ARM: dts: gose: Replace spaces by TABsGeert Uytterhoeven
Make it easier to compare the file with other similar files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Link: https://lore.kernel.org/r/20190904120114.1894-2-geert+renesas@glider.be
2019-10-01xen/efi: Set nonblocking callbacksRoss Lagerwall
Other parts of the kernel expect these nonblocking EFI callbacks to exist and crash when running under Xen. Since the implementations of xen_efi_set_variable() and xen_efi_query_variable_info() do not take any locks, use them for the nonblocking callbacks too. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-09-30ARM: dts: rockchip: Add cpu id to rk3288 efuse nodeDouglas Anderson
This just adds in another field of what's stored in the e-fuse on rk3288. Though I can't personally promise that every rk3288 out there has the CPU ID stored in the eFuse at this location, there is some evidence that it is correct: - This matches what was in the Chrome OS 3.14 branch (see EFUSE_CHIP_UID_OFFSET and EFUSE_CHIP_UID_LEN) for rk3288. - The upstream rk3399 dts file has this same data at the same offset and with the same length, indiciating that this is likely common for several modern Rockchip SoCs. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20190919142611.1.I309434f00a2a9be71e4437991fe08abc12f06e2e@changeid Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-09-30arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to yKeerthy
Commit 6334150e9a36 ("remoteproc: don't allow modular build") changes CONFIG_REMOTEPROC to a boolean from a tristate config option which inhibits all defconfigs marking CONFIG_REMOTEPROC as a module in compiling the remoteproc and dependent config options. So fix the configs to have CONFIG_REMOTEPROC built in. Link: https://lore.kernel.org/r/20190920075946.13282-5-j-keerthy@ti.com Fixes: 6334150e9a36 ("remoteproc: don't allow modular build") Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Will Deacon <will@kernel.org> [olof: Fixed up all 4 occurrances in this one commit] Signed-off-by: Olof Johansson <olof@lixom.net>
2019-09-30Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A few fixes that have trickled in through the merge window: - Video fixes for OMAP due to panel-dpi driver removal - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7 - Fixing arch version on ASpeed ast2500 - Two fixes for reset handling on ARM SCMI" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: aspeed: ast2500 is ARMv6K reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks
2019-09-30ARM: dts: am4372: Set memory bandwidth limit for DISPCPeter Ujfalusi
Set memory bandwidth limit to filter out resolutions above 720p@60Hz to avoid underflow errors due to the bandwidth needs of higher resolutions. am43xx can not provide enough bandwidth to DISPC to correctly handle 'high' resolutions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-29Merge tag 'fixes-5.4-merge-window' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omap variants Few fixes for ti-sysc interconnect target module driver for no-idle quirks that caused nfsroot to fail on some dra7 boards. And let's fixes to get LCD working again for logicpd board that got broken a while back with removal of panel-dpi driver. We need to now use generic CONFIG_DRM_PANEL_SIMPLE instead. * tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-09-26mm: treewide: clarify pgtable_page_{ctor,dtor}() namingMark Rutland
The naming of pgtable_page_{ctor,dtor}() seems to have confused a few people, and until recently arm64 used these erroneously/pointlessly for other levels of page table. To make it incredibly clear that these only apply to the PTE level, and to align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them to pgtable_pte_page_{ctor,dtor}(). These changes were generated with the following shell script: ---- git grep -lw 'pgtable_page_.tor' | while read FILE; do sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE; sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE; done ---- ... with the documentation re-flowed to remain under 80 columns, and whitespace fixed up in macros to keep backslashes aligned. There should be no functional change as a result of this patch. Link: http://lkml.kernel.org/r/20190722141133.3116-1-mark.rutland@arm.com Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()Tony Lindgren
This code is currently unable to find the dts opp tables as ti-cpufreq needs to set them up first based on speed binning. We stopped initializing the opp tables with platform code years ago for device tree based booting with commit 92d51856d740 ("ARM: OMAP3+: do not register non-dt OPP tables for device tree boot"), and all of mach-omap2 is now booting using device tree. We currently get the following errors on init: omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu omap2_set_init_voltage: unable to set vdd_mpu omap2_set_init_voltage: unable to find boot up OPP for vdd_core omap2_set_init_voltage: unable to set vdd_core omap2_set_init_voltage: unable to find boot up OPP for vdd_iva omap2_set_init_voltage: unable to set vdd_iva Let's just drop the unused code. Nowadays ti-cpufreq should be used to to initialize things properly. Cc: Adam Ford <aford173@gmail.com> Cc: André Roth <neolynx@gmail.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Nishanth Menon <nm@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-25ARM: OMAP2+: Add missing LCDC midlemode for am335xTony Lindgren
TRM "Table 13-34. SYSCONFIG Register Field Descriptions" lists both standbymode and idlemode that should be just the sidle and midle registers where midle is currently unconfigured for lcdc_sysc. As the dts data has been generated based on lcdc_sysc, we now have an empty "ti,sysc-midle" property. And so we currently get a warning for lcdc because of a difference with dts provided configuration compared to the legacy platform data. This is because lcdc has SYSC_HAS_MIDLEMODE configured in the platform data without configuring the modes. Let's fix the issue by adding the missing midlemode to lcdc_sysc, and configuring the "ti,sysc-midle" property based on the TRM values. Fixes: f711c575cfec ("ARM: dts: am335x: Add l4 interconnect hierarchy and ti-sysc data") Cc: Jyri Sarha <jsarha@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Robert Nelson <robertcnelson@gmail.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-25ARM: OMAP2+: Fix missing reset done flag for am3 and am43Tony Lindgren
For ti,sysc-omap4 compatible devices with no sysstatus register, we do have reset done status available in the SOFTRESET bit that clears when the reset is done. This is documented for example in am437x TRM for DMTIMER_TIOCP_CFG register. The am335x TRM just says that SOFTRESET bit value 1 means reset is ongoing, but it behaves the same way clearing after reset is done. With the ti-sysc driver handling this automatically based on no sysstatus register defined, we see warnings if SYSC_HAS_RESET_STATUS is missing in the legacy platform data: ti-sysc 48042000.target-module: sysc_flags 00000222 != 00000022 ti-sysc 48044000.target-module: sysc_flags 00000222 != 00000022 ti-sysc 48046000.target-module: sysc_flags 00000222 != 00000022 ... Let's fix these warnings by adding SYSC_HAS_RESET_STATUS. Let's also remove the useless parentheses while at it. If it turns out we do have ti,sysc-omap4 compatible devices without a working SOFTRESET bit we can set up additional quirk handling for it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-24Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: - a few hot fixes - ocfs2 updates - almost all of -mm (slab-generic, slab, slub, kmemleak, kasan, cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug, sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy, oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap, zsmalloc) * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits) mm/zsmalloc.c: fix a -Wunused-function warning zswap: do not map same object twice zswap: use movable memory if zpool support allocate movable memory zpool: add malloc_support_movable to zpool_driver shmem: fix obsolete comment in shmem_getpage_gfp() mm/madvise: reduce code duplication in error handling paths mm: mmap: increase sockets maximum memory size pgoff for 32bits mm/mmap.c: refine find_vma_prev() with rb_last() riscv: make mmap allocation top-down by default mips: use generic mmap top-down layout and brk randomization mips: replace arch specific way to determine 32bit task with generic version mips: adjust brk randomization offset to fit generic version mips: use STACK_TOP when computing mmap base address mips: properly account for stack randomization and stack guard gap arm: use generic mmap top-down layout and brk randomization arm: use STACK_TOP when computing mmap base address arm: properly account for stack randomization and stack guard gap arm64, mm: make randomization selected by generic topdown mmap layout arm64, mm: move generic mmap layout functions to mm arm64: consider stack randomization for mmap base only when necessary ...
2019-09-24arm: use generic mmap top-down layout and brk randomizationAlexandre Ghiti
arm uses a top-down mmap layout by default that exactly fits the generic functions, so get rid of arch specific code and use the generic version by selecting ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT. As ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT selects ARCH_HAS_ELF_RANDOMIZE, use the generic version of arch_randomize_brk since it also fits. Note that this commit also removes the possibility for arm to have elf randomization and no MMU: without MMU, the security added by randomization is worth nothing. Note that it is safe to remove STACK_RND_MASK since it matches the default value. Link: http://lkml.kernel.org/r/20190730055113.23635-9-alex@ghiti.fr Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: James Hogan <jhogan@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24arm: use STACK_TOP when computing mmap base addressAlexandre Ghiti
mmap base address must be computed wrt stack top address, using TASK_SIZE is wrong since STACK_TOP and TASK_SIZE are not equivalent. Link: http://lkml.kernel.org/r/20190730055113.23635-8-alex@ghiti.fr Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: James Hogan <jhogan@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24arm: properly account for stack randomization and stack guard gapAlexandre Ghiti
This commit takes care of stack randomization and stack guard gap when computing mmap base address and checks if the task asked for randomization. This fixes the problem uncovered and not fixed for arm here: https://lkml.kernel.org/r/20170622200033.25714-1-riel@redhat.com Link: http://lkml.kernel.org/r/20190730055113.23635-7-alex@ghiti.fr Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: James Hogan <jhogan@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24mm: consolidate pgtable_cache_init() and pgd_cache_init()Mike Rapoport
Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem cache for page table allocations on several architectures that do not use PAGE_SIZE tables for one or more levels of the page table hierarchy. Most architectures do not implement these functions and use __weak default NOP implementation of pgd_cache_init(). Since there is no such default for pgtable_cache_init(), its empty stub is duplicated among most architectures. Rename the definitions of pgd_cache_init() to pgtable_cache_init() and drop empty stubs of pgtable_cache_init(). Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Will Deacon <will@kernel.org> [arm64] Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24mm: remove quicklist page table cachesNicholas Piggin
Patch series "mm: remove quicklist page table caches". A while ago Nicholas proposed to remove quicklist page table caches [1]. I've rebased his patch on the curren upstream and switched ia64 and sh to use generic versions of PTE allocation. [1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com This patch (of 3): Remove page table allocator "quicklists". These have been around for a long time, but have not got much traction in the last decade and are only used on ia64 and sh architectures. The numbers in the initial commit look interesting but probably don't apply anymore. If anybody wants to resurrect this it's in the git history, but it's unhelpful to have this code and divergent allocator behaviour for minor archs. Also it might be better to instead make more general improvements to page allocator if this is still so slow. Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24mm: introduce compound_nr()Matthew Wilcox (Oracle)
Replace 1 << compound_order(page) with compound_nr(page). Minor improvements in readability. Link: http://lkml.kernel.org/r/20190721104612.19120-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24mm: introduce page_size()Matthew Wilcox (Oracle)
Patch series "Make working with compound pages easier", v2. These three patches add three helpers and convert the appropriate places to use them. This patch (of 3): It's unnecessarily hard to find out the size of a potentially huge page. Replace 'PAGE_SIZE << compound_order(page)' with page_size(page). Link: http://lkml.kernel.org/r/20190721104612.19120-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24ARM: dts: Fix gpio0 flags for am335x-icev2Tony Lindgren
The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at the interconnect target module level for the modules that have it defined. Otherwise we get the following warnings: dts flag should be at module level for ti,no-idle-on-init dts flag should be at module level for ti,no-reset-on-init Fixes: 87fc89ced3a7 ("ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc") Cc: Lokesh Vutla <lokeshvutla@ti.com> Reported-by: Suman Anna <s-anna@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-23Merge tag 'pci-v5.4-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-09-23ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modulesTony Lindgren
Droid4 needs USB option serial driver for modem, and lm3532 for the LCD backlight. Note that the LCD backlight does not yet get enabled automatically, but needs to be done manually with: # echo 50 > /sys/class/leds/lm3532::backlight/brightness Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-23ARM: omap2plus_defconfig: Enable DRM_TI_TFP410Adam Ford
The TFP410 driver was removed but the replacement driver was never enabled. This patch enableds the DRM_TI_TFP410 Fixes: be3143d8b27f ("drm/omap: Remove TFP410 and DVI connector drivers") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-23Merge branch 'fixes-merge-window-pt2' into fixesTony Lindgren
generated by cgit (git 2.34.1) at 2025-09-22 05:58:37 +0000