summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2019-09-03ARM: scoop: Use the right includeLinus Walleij
This is a GPIO driver so it should include <linux/gpio/driver.h> not <linux/gpio.h> Link: https://lore.kernel.org/r/20190820103429.7028-1-linus.walleij@linaro.org Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'imx-defconfig-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig i.MX defconfig update for 5.4: - Enable pinctrl and clock driver support for i.MX8MN SoC. - Enable SDMA support for i.MX8MQ and i.MX8MM SoC, including FW_LOADER_USER_HELPER and FW_LOADER_USER_HELPER_FALLBACK to support SDMA firmware loading via udev. - Enable module build of i.MX8 DDR PMU driver and ETNAVIV GPU driver. - Enable module build of OV5645 camera driver in imx_v6_v7_defconfig. * tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: CONFIG_DRM_ETNAVIV=m ARM: imx_v6_v7_defconfig: Select the OV5645 camera driver arm64: defconfig: Build imx8 ddr pmu as module arm64: defconfig: Select CONFIG_CLK_IMX8MN by default arm64: defconfig: Select CONFIG_PINCTRL_IMX8MN by default arm64: defconfig: Enable SDMA on i.mx8mq/8mm Link: https://lore.kernel.org/r/20190825153237.28829-7-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'aspeed-5.4-defconfig' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig ASPEED defconfig updates for 5.4 - Enable the new AST2600 in multi_v7 and the aspeed_g5 configs. - Regenerate defconfigs to drop old options - Clean up network options * tag 'aspeed-5.4-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: configs: aspeed_g5: Enable AST2600 ARM: configs: multi_v7: Add ASPEED G6 ARM: configs: aspeed: Refresh defconfigs ARM: configs: aspeed: Enable commonly used network functionality Link: https://lore.kernel.org/r/CACPK8XdyWzghA0QPDzA_MK5FYwhT5afqDJHNdhc8mfD2uk8MfQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'ux500-dts-v5.4-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt More Ux500 device tree updates for the v5.4 kernel: - Drop TV-OUT muxgroup from the HREF pin control - Fix up BU21013 touchpad from Dmitry - Split of AB8500 config in its own DTSI - Drop the unused USB regulator config - Add proper thermal zone for the CPU * tag 'ux500-dts-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: ux500: Update thermal zone ARM: dts: ux500: Remove ab8500_ldo_usb regulator from device tree ARM: dts: ux500: Move ab8500 nodes to ste-ab8500.dtsi ARM: ux500: improve BU21013 touchpad bindings ARM: dts: ux500: Drop TV-out muxgroup on HREFs Link: https://lore.kernel.org/r/CACRpkdZ9Xvx+rg-hFVgG61_i2CdQSs+nZq5FXkkK2-3Ce9ooWg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'mvebu-dt-5.4-1' of git://git.infradead.org/linux-mvebu into arm/dtArnd Bergmann
mvebu dt for 5.4 (part 1) - Disable the kirkwood RTC that doesn't work on the ts219 board * tag 'mvebu-dt-5.4-1' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: ts219: disable the SoC's RTC Link: https://lore.kernel.org/r/878srdzjpj.fsf@FE-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'at91-5.4-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.4 - style cleanup for at91sam9x5 based boards - avoid colliding node and property names * tag 'at91-5.4-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: at91sam9x5dm.dtsi: Style cleanup ARM: dts: at91: at91sam9x5_lcd.dtsi: Style cleanup ARM: dts: at91: at91sam9xx5ek: Style cleanup ARM: dts: at91: at91sam9g15: Style cleanup ARM: dts: at91: kizboxmini: Style cleanup ARM: dts: at91: cosino: Style cleanup ARM: dts: at91: ariettag25: style cleanup ARM: dts: at91: ariag25: Style cleanup ARM: dts: at91: Add label for sam9x5's internal RTC dt-bindings: add vendor prefix "acme" for "Acme Systems srl" ARM: dts: at91: Avoid colliding 'display' node and property names Link: https://lore.kernel.org/r/20190825202642.GA18853@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'imx-dt-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm32 device tree changes for 5.4: - New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310, and PHYTEC phyBOARD-Segin based on i.MX6ULL. - A series from Andrey Smirnov to update vf610-zii boards on I2C pinmux, switch watchdog, GPIO expander IRQ. - Move GIC node into soc node for i.MX6 SoCs. - Add OV5645 camera support for imx6qdl-wandboard board. - Drop unneeded snvs_pwrkey node for imx7d-zii-rpu2 and imx7-colibri. - Use simple-mfd instead of simple-bus for i.MX6 ANATOP. - Move the native-mode property inside the display-timings node for various i.MX25 and i.MX27 boards. - Add EDMA devices for i.MX7ULP SoC. - A series from Stefan Riedmueller to update imx6ul-phytec-segin board on various devices. - Use OF graph to describe the display for opos6uldev board. - Misc random updates on i.MX7/6 boards. * tag 'imx-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: vf610-zii-scu4-aib: Configure IRQ line for GPIO expander ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards ARM: dts: vf610-zii-cfu1: Slow I2C0 down to 100 kHz ARM: dts: pbab01: correct rtc vendor ARM: vf610-zii-cfu1: Add node for switch watchdog ARM: dts: imx6: drop gpmi-nand address and size cells ARM: dts: imx6: replace simple-bus by simple-mfd for anatop ARM: dts: imx6qdl-colibri: add phy to fec ARM: dts: imx7-colibri: add recovery for I2C for iMX7 ARM: dts: imx7-colibri: Add sleep pinctrl to ethernet ARM: dts: imx7-colibri: prepare module device tree for FlexCAN ARM: dts: imx7-colibri: disable HS400 ARM: dts: imx7-colibri: make sure module supplies are always on ARM: dts: imx7d: cl-som-imx7: add compatible for phy ARM: dts: imx7d: cl-som-imx7: make ethernet work again ARM: dts: imx6ul: Add csi node ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings ARM: dts: apf27dev: native-mode is part of display-timings ARM: dts: edb7211: native-mode is part of display-timings ARM: dts: imx27-phytec-phycore-rdk: native-mode is part of display-timings ... Link: https://lore.kernel.org/r/20190825153237.28829-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'aspeed-5.4-devicetree' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.4 New machines: - Facebook Wedge100, Wedge40 and Minipack - Lenovo Hr855xg2 - Wistron Mihawk There's a few other updates, notably some changes to to use the newly added SDHCI driver. * tag 'aspeed-5.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: swift: Add eMMC device ARM: dts: aspeed: Enable first MMC slot on AST2500 EVB ARM: dts: aspeed: Describe SD controllers ARM: dts: aspeed: Add Mihawk BMC platform ARM: dts: aspeed: fp5280g2: Fix power supply address ARM: dts: aspeed: tiogapass: Add Riser card ARM: dts: aspeed: tiogapass: Move battery sensor ARM: dts: aspeed: Add Facebook Wedge100 BMC ARM: dts: aspeed: Add Facebook Wedge40 BMC ARM: dts: aspeed: swift: Fix FSI GPIOs ARM: dts: aspeed: Add SGPM pinmux ARM: dts: aspeed: tiogapass: Add VR devices ARM: dts: aspeed: Add Lenovo Hr855xg2 BMC ARM: dts: aspeed: Add Facebook Minipack BMC Link: https://lore.kernel.org/r/CACPK8XfKHpNYXNE_VRaLeGUQa7-hkmUS0nsPfaeSLE4sckKFHg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'omap-for-v5.4/dt-take2-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt dts changes for omap variants for v5.4 Remove regulator-boot-off properties that we never had in the mainline kernel so they won't do anything. We add stdout-path for gta04, and make am335x-boneblue use am335x-osd335x-common.dtsi file. * tag 'omap-for-v5.4/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-boneblue: Use of am335x-osd335x-common.dtsi ARM: dts: gta04: define chosen/stdout-path ARM: dts: omap3-n950-n9: Remove regulator-boot-off property ARM: dts: am335x-cm-t335: Remove regulator-boot-off property Link: https://lore.kernel.org/r/pull-1566599057-142651@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'v5.3-next-dts32' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt add support for the mt7629 reference board * tag 'v5.3-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mediatek: add basic support for MT7629 SoC Link: https://lore.kernel.org/r/e236f659-2851-21b8-1873-314cd72ed6be@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'sunxi-dt-for-5.4-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner DT changes for 5.4 Our usual pile of patches for the next release, which include mostly: - More fixes thanks to the DT validation using the YAML bindings - IR receiver support on the H6 - SPDIF support on the H6 - I2C Support on the H6 - CSI support on the A20 - RTC support on the H6 - New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC * tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (40 commits) arm64: dts: allwinner: orange-pi-3: Enable WiFi ARM: dts: sunxi: Add missing watchdog clocks ARM: dts: sunxi: Add missing watchdog interrupts arm64: dts: allwinner: h6: Add support for RTC and fix the clock tree ARM: dts: sun7i: Add CSI0 controller arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC) dt-bindings: arm: sunxi: Add compatible for A64 OlinuXino with eMMC ARM: dts: v3s: Change the timers compatible ARM: dts: h3: Change the timers compatible ARM: dts: a83t: Change the timers compatible ARM: dts: a23/a33: Change the timers compatible ARM: dts: sun6i: Add missing timers interrupts ARM: dts: sun5i: Add missing timers interrupts ARM: dts: sun4i: Add missing timers interrupts dt-bindings: mfd: Convert Allwinner GPADC bindings to a schema arm64: dts: allwinner: h6: Introduce Tanix TX6 board dt-bindings: arm: sunxi: Add compatible for Tanix TX6 board arm64: allwinner: h6: add I2C nodes dt-bindings: i2c: mv64xxx: Add compatible for the H6 i2c node. ARM: dts: sunxi: Add mdio bus sub-node to GMAC ... Link: https://lore.kernel.org/r/d97e6252-9dd7-4cf5-a3cf-56f78b0ca455.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'renesas-arm-dt-for-v5.4-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.4 - Fix HSCIF PM Domain on R-Car H1, - PMU support for RZ/G1C. * tag 'renesas-arm-dt-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: r8a77470: Add PMU device node ARM: dts: r8a7779: Use SYSC "always-on" PM Domain for HSCIF Link: https://lore.kernel.org/r/20190823123643.18799-2-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'amlogic-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.4 Highlights - odroid-c1: use MAC address from efuse - add VDD_EE regulator to several boards * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: use the MAC address stored in the eFuse ARM: dts: meson8b: mxq: add the VDDEE regulator ARM: dts: meson8b: odroidc1: add the VDDEE regulator ARM: dts: meson8b: ec100: add the VDDEE regulator ARM: dts: meson8b: add the PWM_D output pin ARM: dts: meson8b: add ethernet fifo sizes Link: https://lore.kernel.org/r/7hzhk3bi96.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'socfpga_dts_updates_for_v5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.4 - Add reset properties for various peripherals - QSPI OCP and DMA on Arria10 - DMA on Agilex/Stratix10 - Update NAND controller bindings to match driver update - Add NAND controller to Stratix10 - VINING FPGA board fixups - Update button mapping - Adjust GMAC1 clock and TXD skew settings - Add missing reset-names for dma controller * tag 'socfpga_dts_updates_for_v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: add missing reset-names for dma ARM: dts: socfpga: Adjust GMAC1 clock and TXD lines skew on VINING FPGA ARM: dts: socfpga: Fix up button mapping on VINING FPGA arm64: dts: stratix10: Add NAND device node ARM: dts: socfpga: update to new Denali NAND binding arm64: dts: agilex/stratix10: Add reset properties for DMA ARM: dts: socfpga: add reset properties for DMA ARM: dts: socfpga: add the QSPI OCP reset property on arria10 Link: https://lore.kernel.org/r/20190819141659.26414-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'v5.4-rockchip-dts32-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt A lot more love for Veyron devices with cleanups in the display and wifi areas and also a 100ms speedup as a delay isn't needed anymore. New boards are Tiger and Fievel from the Veyron family and the Mecer Xtreme Mini S6, which I think is the first consumer-grade rk3229-based device in the kernel. * tag 'v5.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: add device tree for Mecer Xtreme Mini S6 Revert "ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators" ARM: dts: rockchip: Add pin names for rk3288-veyron fievel ARM: dts: rockchip: A few fixes for veyron-{fievel,tiger} ARM: dts: rockchip: Cleanup style around assignment operator ARM: dts: rockchip: add veyron-tiger board ARM: dts: rockchip: add veyron-fievel board dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-{fievel,tiger} ARM: dts: rockchip: consolidate veyron panel and backlight settings ARM: dts: rockchip: move rk3288-veryon display settings into a separate file ARM: dts: rockchip: Limit WiFi TX power on rk3288-veyron-jerry ARM: dts: rockchip: Specify rk3288-veyron-minnie's display timings ARM: dts: rockchip: Specify rk3288-veyron-chromebook's display timings Link: https://lore.kernel.org/r/1611583.rKl1eQBRh8@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'samsung-dt-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.4 1. Add AHCI to Exynos5250, 2. Add camera and GPU power domains to Exynos5422, 3. Minor cleanup. * tag 'samsung-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add CAM power domain to Exynos5422/5800 ARM: dts: exynos: Add G3D power domain to Exynos542x ARM: dts: exynos: Move MSC power domain to the right (sorted) place ARM: dts: exynos: Add port map to Exynos5250 AHCI node ARM: dts: exynos: Use space after '=' in exynos4412-itop-scp-core Link: https://lore.kernel.org/r/20190816163042.6604-2-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'omap-for-v5.4/soc-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc SoC changes for omap variants for v5.4 The first change moves platform-specific asm-offsets.h to arch/arm/mach-omap2 to fix iessu with parallel build with CONFIG_IKHEADERS, and the second change removes a useless kfree. Note that the first change causes a trivial merge conflict with the iommu changes for arch/arm/mach-omap2/Makefile. * tag 'omap-for-v5.4/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init() ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 Link: https://lore.kernel.org/r/pull-1567016893-318461@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'at91-5.4-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/soc AT91 SoC for 5.4 - MAINTAINERS updates - a generated headers parallel build fix * tag 'at91-5.4-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: mailmap: map old company name to new one @microchip.com MAINTAINERS: at91: remove the TC entry MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 Link: https://lore.kernel.org/r/20190825203222.GA22800@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'imx-soc-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc i.MX SoC changes for 5.4: - Drop AR8031 PHY TX delay adjusting from i.MX7D machine code, as it's superfluous due to the recent changes to Atheros AT803X driver. - Select TIMER_IMX_SYS_CTR for arm64 ARCH_MXC platform, since the system counter is needed as broadcast timer for cpuidle support. * tag 'imx-soc-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: stop adjusting ar8031 phy tx delay arm64: Enable TIMER_IMX_SYS_CTR for ARCH_MXC platforms Link: https://lore.kernel.org/r/20190825153237.28829-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'aspeed-5.4-arch' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/soc ASPEED architecture updates for 5.4 This adds support for the new ASPEED AST2600 BMC SoC. * tag 'aspeed-5.4-arch' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: aspeed: Enable SMP boot ARM: aspeed: Add ASPEED AST2600 architecture ARM: aspeed: Select timer in each SoC dt-bindings: arm: cpus: Add ASPEED SMP Link: https://lore.kernel.org/r/CACPK8Xc1aSp5fXL3cEzC9SJsCXG2JwsSPpQrW3a09dkvhCyHHA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'vexpress-update-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/soc ARMv7 Vexpress update for v5.4 Single cleanup patch handling type checks using cppcheck tool (bitwise shift by more than 31 on a 32 bit type) * tag 'vexpress-update-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: ARM: vexpress: Cleanup cppcheck shifting warning Link: https://lore.kernel.org/r/20190814172441.26143-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-02Merge 5.3-rc7 into usb-nextGreg Kroah-Hartman
We need the usb fixes in here for testing Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-02ARM: multi_v7_defconfig: Make MAX77802 regulator driver built-inMarek Szyprowski
Maxim 77802 PMIC is a main PMIC for the following Exynos5 based boards: Odroid XU, Chromebook Pit and Chromebook Pi. Driver for its voltage regulator is needed very early during boot to properly instantiate SD/MMC devices and mount rootfs, so change that driver to be compiled-in. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-09-02ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi ChromebooksMarek Szyprowski
Commit aff138bf8e37 ("ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards") assigned LDO10 to Exynos Thermal Measurement Unit, but it turned out that it supplies also some other critical parts and board freezes/crashes when it is turned off. The mentioned commit made Exynos TMU a consumer of that regulator and in typical case Exynos TMU driver keeps it enabled from early boot. However there are such configurations (example is multi_v7_defconfig), in which some of the regulators are compiled as modules and are not available from early boot. In such case it may happen that LDO10 is turned off by regulator core, because it has no consumers yet (in this case consumer drivers cannot get it, because the supply regulators for it are not yet available). This in turn causes the board to crash. This patch restores 'always-on' property for the LDO10 regulator. Fixes: aff138bf8e37 ("ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-09-02ARM: dts: exynos: Remove not accurate secondary ADC compatibleKrzysztof Kozlowski
The Exynos3250 ADC has its own compatible because of differences from other Exynos SoCs. Therefore it is not entirely compatible with samsung,exynos-adc-v2. Remove the samsung,exynos-adc-v2. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-09-02spi: ep93xx: Repair SPI CS lookup tablesAlexander Sverdlin
The actual device name of the SPI controller being registered on EP93xx is "spi0" (as seen by gpiod_find_lookup_table()). This patch fixes all relevant lookup tables and the following failure (seen on EDB9302): ep93xx-spi ep93xx-spi.0: failed to register SPI master ep93xx-spi: probe of ep93xx-spi.0 failed with error -22 Fixes: 1dfbf334f1236 ("spi: ep93xx: Convert to use CS GPIO descriptors") Cc: stable@vger.kernel.org Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Link: https://lore.kernel.org/r/20190831180402.10008-1-alexander.sverdlin@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-01ARM: multi_v7_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOMAndy Gross
Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all ARCH_QCOM enabled defconfigs to restore the previous expected build behavior. I split this off from the original patch to make this change unique to the multi_v7_defconfig Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-09-01ARM: qcom_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOMJordan Crouse
Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all ARCH_QCOM enabled defconfigs to restore the previous expected build behavior. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-30Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Three fixes for ARM this time around: - A fix for update_sections_early() to cope with NULL ->mm pointers. - A correction to the backtrace code to allow proper backtraces. - Reinforcement of pfn_valid() with PFNs >= 4GiB" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8901/1: add a criteria for pfn_valid of arm ARM: 8897/1: check stmfd instruction using right shift ARM: 8874/1: mm: only adjust sections of valid mm structures
2019-08-30Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "The majority of the fixes this time are for OMAP hardware, here is a breakdown of the significant changes: Various device tree bug fixes: - TI am57xx boards need a voltage level fix to avoid damaging SD cards - vf610-bk4 fails to detect its flash due to an incorrect description - meson-g12a USB phy configuration fails - meson-g12b reboot should not power off the SD card - Some corrections for apparently harmless differences from the documentation. Regression fixes: - ams-delta FIQ interrupts broke in 5.3 - TI am3/am4 mmc controllers broke in 5.2 The logic_pio driver (used on some Huawei ARM servers) got a few bug fixes for reliability. And a couple of compile-time warning fixes" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits) soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST soc: ti: pm33xx: Make two symbols static soc: ti: pm33xx: Fix static checker warnings ARM: OMAP: dma: Mark expected switch fall-throughs ARM: dts: Fix incomplete dts data for am3 and am4 mmc bus: ti-sysc: Simplify cleanup upon failures in sysc_probe() ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack ARM: dts: dra74x: Fix iodelay configuration for mmc3 ARM: dts: am335x: Fix UARTs length ARM: OMAP2+: Fix omap4 errata warning on other SoCs bus: hisi_lpc: Add .remove method to avoid driver unbind crash bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free lib: logic_pio: Add logic_pio_unregister_range() lib: logic_pio: Avoid possible overlap for unregistering regions lib: logic_pio: Fix RCU usage arm64: dts: amlogic: odroid-n2: keep SD card regulator always on arm64: dts: meson-g12a-sei510: enable IR controller arm64: dts: meson-g12a: add missing dwc2 phy-names ARM: dts: vf610-bk4: Fix qspi node description ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7 ...
2019-08-30irqchip/mmp: Mask off interrupts from other coresAndres Salomon
On mmp3, there's an extra set of ICU registers (ICU2) that handle interrupts on the extra cores. When masking off interrupts on MP1, these should be masked as well. We add a new interrupt controller via device tree to identify when we're looking at an mmp3 machine via compatible field of "marvell,mmp3-intc". [lkundrak@v3.sk: Changed "mrvl,mmp3-intc" compatible strings to "marvell,mmp3-intc". Tidied up the subject line a bit.] Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20190822092643.593488-9-lkundrak@v3.sk -- Changes since v1: - Moved mmp3-specific mmp_icu2_base initialization from mmp_init_bases() to mmp3_of_init() so that we don't have to check for marvell,mmp3-intc compatibility twice. - Drop an superfluous call to irq_set_default_host() arch/arm/mach-mmp/regs-icu.h | 3 +++ drivers/irqchip/irq-mmp.c | 48 ++++++++++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+) Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20190822092643.593488-9-lkundrak@v3.sk
2019-08-29dma-mapping: remove arch_dma_mmap_pgprotChristoph Hellwig
arch_dma_mmap_pgprot is used for two things: 1) to override the "normal" uncached page attributes for mapping memory coherent to devices that can't snoop the CPU caches 2) to provide the special DMA_ATTR_WRITE_COMBINE semantics on older arm systems and some mips platforms Replace one with the pgprot_dmacoherent macro that is already provided by arm and much simpler to use, and lift the DMA_ATTR_WRITE_COMBINE handling to common code with an explicit arch opt-in. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Acked-by: Paul Burton <paul.burton@mips.com> # mips
2019-08-29ARM: 8890/1: l2x0: add marvell,ecc-enable property for auroraChris Packham
The aurora cache on the Marvell Armada-XP SoC supports ECC protection for the L2 data arrays. Add a "marvell,ecc-enable" device tree property which can be used to enable this. [jlu@pengutronix.de: use aurora specific define AURORA_ACR_ECC_EN] Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-29ARM: 8886/1: l2x0: support parity-enable/disable on auroraChris Packham
The aurora cache on the Marvell Armada-XP SoC supports the same tag parity features as the other l2x0 cache implementations. [jlu@pengutronix.de: use aurora specific define AURORA_ACR_PARITY_EN] Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-29ARM: 8885/1: aurora-l2: add defines for parity and ECC registersJan Luebbe
These defines will be used by subsequent patches to add support for the parity check and error correction functionality in the Aurora L2 cache controller. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-29ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZEJan Luebbe
The macro name is too generic, so add a AURORA_ prefix. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-29ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardwareJan Luebbe
This include file will be used by the AURORA EDAC code. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-29ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for ClangNathan Huckleberry
The stackframe setup when compiled with clang is different. Since the stack unwinder expects the gcc stackframe setup it fails to print backtraces. This patch adds support for the clang stackframe setup. Link: https://github.com/ClangBuiltLinux/linux/issues/35 Cc: clang-built-linux@googlegroups.com Suggested-by: Tri Vo <trong@google.com> Signed-off-by: Nathan Huckleberry <nhuck@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-28ARM: 8901/1: add a criteria for pfn_valid of armzhaoyang
pfn_valid can be wrong when parsing a invalid pfn whose phys address exceeds BITS_PER_LONG as the MSB will be trimed when shifted. The issue originally arise from bellowing call stack, which corresponding to an access of the /proc/kpageflags from userspace with a invalid pfn parameter and leads to kernel panic. [46886.723249] c7 [<c031ff98>] (stable_page_flags) from [<c03203f8>] [46886.723264] c7 [<c0320368>] (kpageflags_read) from [<c0312030>] [46886.723280] c7 [<c0311fb0>] (proc_reg_read) from [<c02a6e6c>] [46886.723290] c7 [<c02a6e24>] (__vfs_read) from [<c02a7018>] [46886.723301] c7 [<c02a6f74>] (vfs_read) from [<c02a778c>] [46886.723315] c7 [<c02a770c>] (SyS_pread64) from [<c0108620>] (ret_fast_syscall+0x0/0x28) Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-28ARM: dts: ux500: Update thermal zoneLinus Walleij
After moving the DB8500 thermal driver to use device tree we define the default thermal zone for the Ux500 in the device tree replacing the oldstyle hardcoded trigger points. This default thermal zone utilizes the cpufreq driver (using the generic OF cpufreq back-end) as a passive cooling device, and defines a critical trip point when the temperature goes above 85 degrees celsius which will (hopefully) make the system shut down if the temperature cannot be controlled. This default policy can later be augmented for specific subdevices if these have tighter temperature conditions. After this patch we get: /sys/class/thermal/thermal_zone0 (CPU thermal zone) This reports the rough temperature and trip points from the thermal zone in the device tree. By executing two yes > /dev/null & jobs fully utilizing the two CPU cores we can notice the temperature climbing in the thermal zone in response and falling when we kill the jobs. /syc/class/thermal/cooling_device0 (cpufreq cooling) this reports all 4 available cpufreq frequencies as states. Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-27ARM: dts: kirkwood: ts219: disable the SoC's RTCUwe Kleine-König
The internal RTC doesn't work, loading the driver only yields rtc-mv f1010300.rtc: internal RTC not ticking . So disable it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Acked-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-08-26ARM: dts: Drop legacy custom hwmods property for dra7 gpioTony Lindgren
With recent ti-sysc driver changes, we can probe most devices with device tree data only and drop the custom "ti,hwmods" property. We have already added the related device tree data earlier, and have already dropped the platform data. But we have been still dynamically allocating the platform data based on "ti,hwmods" property. With recent ti-sysc driver changes this is no longer needed. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26ARM: dts: Drop legacy custom hwmods property for dra7 mmcTony Lindgren
With recent ti-sysc driver changes, we can probe most devices with device tree data only and drop the custom "ti,hwmods" property. We have already added the related device tree data earlier, and have already dropped the platform data. But we have been still dynamically allocating the platform data based on "ti,hwmods" property. With recent ti-sysc driver changes this is no longer needed. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26ARM: dts: Drop legacy custom hwmods property for dra7 i2cTony Lindgren
With recent ti-sysc driver changes, we can probe most devices with device tree data only and drop the custom "ti,hwmods" property. We have already added the related device tree data earlier, and have already dropped the platform data. But we have been still dynamically allocating the platform data based on "ti,hwmods" property. With recent ti-sysc driver changes this is no longer needed. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26ARM: dts: Drop legacy custom hwmods property for dra7 uartTony Lindgren
With recent ti-sysc driver changes, we can probe most devices with device tree data only and drop the custom "ti,hwmods" property. We have already added the related device tree data earlier, and have already dropped the platform data. But we have been still dynamically allocating the platform data based on "ti,hwmods" property. With recent ti-sysc driver changes this is no longer needed. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26ARM: OMAP2+: Drop legacy platform data for dra7 mcaspTony Lindgren
With recent ti-sysc driver changes, we can probe most devices with device tree data only and drop the custom "ti,hwmods" property. Let's drop the legacy platform data and custom "ti,hwmods" property. We want to do this in a single patch as the "ti,hwmods" property is used to allocate platform data dynamically that we no longer want to do. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26ARM: OMAP2+: Drop legacy platform data for dra7 mcspiTony Lindgren
With recent ti-sysc driver changes, we can probe most devices with device tree data only and drop the custom "ti,hwmods" property. Let's drop the legacy platform data and custom "ti,hwmods" property. We want to do this in a single patch as the "ti,hwmods" property is used to allocate platform data dynamically that we no longer want to do. Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init()Markus Elfring
A null pointer would be passed to a call of the function "kfree" directly after a call of the function "kzalloc" failed at one place. Remove this superfluous function call. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2Masahiro Yamada
<generated/ti-pm-asm-offsets.h> is only generated and included by arch/arm/mach-omap2/, so it does not need to reside in the globally visible include/generated/. I renamed it to arch/arm/mach-omap2/pm-asm-offsets.h since the prefix 'ti-' is just redundant in mach-omap2/. My main motivation of this change is to avoid the race condition for the parallel build (-j) when CONFIG_IKHEADERS is enabled. When it is enabled, all the headers under include/ are archived into kernel/kheaders_data.tar.xz and exposed in the sysfs. In the parallel build, we have no idea in which order files are built. - If ti-pm-asm-offsets.h is built before kheaders_data.tar.xz, the header will be included in the archive. Probably nobody will use it, but it is harmless except that it will increase the archive size needlessly. - If kheaders_data.tar.xz is built before ti-pm-asm-offsets.h, the header will not be included in the archive. However, in the next build, the archive will be re-generated to include the newly-found ti-pm-asm-offsets.h. This is not nice from the build system point of view. - If ti-pm-asm-offsets.h and kheaders_data.tar.xz are built at the same time, the corrupted header might be included in the archive, which does not look nice either. This commit fixes the race. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26ARM: dts: ARM: dts: Configure interconnect target module for am3517sgxAdam Ford
Based on Tony Lindgren's work for omap34xx, this patch applies the same functionality to the AM3517. The following can be tested via sysfs with the following to ensure the SGX module gets enabled and disabled properly: 0x00010201 Bus error Cc: Filip Matijević <filip.matijevic.pz@gmail.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: moaz korena <moaz@korena.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Philipp Rossak <embed3d@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Adam Ford <aford173@gmail.com> [tony@atomide.com: updated subject, dropped rstctrl info] Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2025-09-23 10:10:05 +0000