| Age | Commit message (Collapse) | Author |
|---|
|
Looks like omap34xx OCP registers are not readable unlike on omap36xx.
We use SGX revision register instead of the OCP revision register for
34xx and do not configure any SYSCONFIG register unlike for 36xx.
I've tested that the interconnect target module enables and idles
just fine with PM runtime control via sys:
# echo on > $(find /sys -name control | grep \/5000); rwmem 0x5000fe10
# rwmem 0x50000014 # SGX revision register on 36xx
0x50000014 = 0x00010205
# echo auto > $(find /sys -name control | grep \/5000)
# rwmem 0x5000fe00
And when idled, it will produce "Bus error" as expected.
Cc: Adam Ford <aford173@gmail.com>
Cc: Filip Matijević <filip.matijevic.pz@gmail.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: moaz korena <moaz@korena.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Philipp Rossak <embed3d@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
I've tested that the interconnect target module enables and idles
just fine when probed with ti-sysc with PM runtime control via sys:
# echo on > $(find /sys -name control | grep \/5600)
# rwmem 0x5600fe00 # OCP Revision
0x5600fe00 = 0x40000000
# echo auto > $(find /sys -name control | grep \/5600)
# rwmem 0x5600fe10
# rwmem 0x56000024
Cc: Adam Ford <aford173@gmail.com>
Cc: Filip Matijević <filip.matijevic.pz@gmail.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: moaz korena <moaz@korena.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Philipp Rossak <embed3d@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
I've tested that the interconnect target module enables and idles
just fine when probed with ti-sysc with PM runtime control via sys:
# echo on > $(find /sys -name control | grep \/5601)
# rwmem 0x56000024
0x56000024 = 0x00010200 # SGX540 CORE_REVISION
# echo auto > $(find /sys -name control | grep \/5601)
# rwmem 0x56000024
And when idled, it will produce "Bus error" as expected.
Cc: Adam Ford <aford173@gmail.com>
Cc: Filip Matijević <filip.matijevic.pz@gmail.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: moaz korena <moaz@korena.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Philipp Rossak <embed3d@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's configure the related dts data based on what we have
defined in the legacy platform data.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the custom ti,hwmods dts property. We have already
dropped the platform data earlier and have been allocating it
dynamically.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe cpsw with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property for am3 and am4.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe cpsw with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property for am3 and am4.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
In preparation for dropping legacy platform data and custom ti,hwmods
property, we need to make functional clock available for mdio for the
SoCs so the the mdio driver can find it.
The mdio hardware currently relies on a mdio_hwmod to manage the clock
for omap variants. This is wrong though as there are no separate
sysconfig registers for mdio. All the cpsw related components are just
children of the gmac module.
Note that since mdio is a child of cpsw, just doing pm_runtime_get()
in the mdio driver enables the clock. However, since mdio is also used
by davinci that does not implement runtime PM, let's just add the fck
for now.
Also note that am437x mdio already has a clock, let's update it to
not use the legacy clock naming to unify things further.
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Now that the da8xx fbdev driver supports power control with an actual
regulator, switch to using a fixed power supply for da850-evm.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Instead of enabling the panel backlight in a callback defined in board
file using deprecated legacy GPIO API calls, model the line as a GPIO
backlight device.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
The driver is dedicated to DM646x. So update the description in the top
most comment accordingly.
It must have been derived from dm644x.c, but looks DM646 speecific now.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Logic PD re-spun the L138 and AM1808 SOM's with larger flash.
The m25p80 driver has a generic 'jedec,spi-nor' compatible option
which is requests to use whenever possible since it will read the
JEDEC READ ID opcode.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
We now have a proper clocksource driver for davinci. Switch the dm646x
platform to using it.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
We now have a proper clocksource driver for davinci. Switch the dm644x
platform to using it.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This brings the secondary CPU into Linux. It depends on the setup
performed by ASPEED's u-boot.
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The AST2600 is a Cortex A7 dual core CPU that uses the ARM GIC for
interrupts and ARM timer as a clocksource.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
In preparation for adding the ast2600 which does not use this timer.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
CONFIG_STRICT_KERNEL_RWX is enabled by default with ARMv7.
Turn on HIGHMEM as the EVB has 2GB of RAM, and not all is usable without
hihgmem.
The SoC contains Cortex A7 supporting VFP and has two CPUs.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This adds the ASPEED AST2600 system and associated ASPEED devices so we
get build coverage.
The changes to the UART configuration to ensure the default console
(UART5) works.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Configure IRQ line for SX1503 GPIO expander. We already have
appropriate pinmux entry and all that is missing is "interrupt-parent"
and "interrupts" properties. Add them.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pull dma-mapping fixes from Christoph Hellwig:
"Two fixes for regressions in this merge window:
- select the Kconfig symbols for the noncoherent dma arch helpers on
arm if swiotlb is selected, not just for LPAE to not break then Xen
build, that uses swiotlb indirectly through swiotlb-xen
- fix the page allocator fallback in dma_alloc_contiguous if the CMA
allocation fails"
* tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: fix zone selection after an unaddressable CMA allocation
arm: select the dma-noncoherent symbols for all swiotlb builds
|
|
Add support for i.MX6UL modules from Kontron Electronics GmbH (before
acquisition: Exceet Electronics) and evalkit boards based on it:
1. N6310 SOM: i.MX6 UL System-on-Module, a 25x25 mm solderable module
(LGA pads and pin castellations) with 256 MB RAM, 1 MB NOR-Flash,
256 MB NAND and other interfaces,
2. N6310 S: evalkit, w/wo eMMC, without display,
3. N6310 S 43: evalkit with 4.3" display,
The work is based on Exceet/Kontron source code (GPLv2) with numerous
changes:
1. Reorganize files,
2. Rename Exceet -> Kontron,
3. Rename models/compatibles to match newest Kontron product naming,
4. Fix coding style errors and adjust to device tree coding guidelines,
5. Fix DTC warnings,
6. Extend compatibles so eval boards inherit the SoM compatible,
7. Use defines instead of GPIO and interrupt flag values,
8. Use proper vendor compatible for Macronix SPI NOR,
9. Replace deprecated bindings with proper ones,
10. Sort nodes alphabetically,
11. Remove Admatec display nodes (not yet supported).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fiber-optic modules attached to the bus are only rated to work at
100 kHz, so decrease the bus frequency to accommodate that.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Recent changes to the Atheros at803x driver cause
the approach taken here to stop working because
commit 6d4cd041f0af
("net: phy: at803x: disable delay only for RGMII mode")
and commit cd28d1d6e52e
("net: phy: at803x: Disable phy delay for RGMII mode")
fix the AR8031 driver to configure the phy's (RX/TX)
delays as per the 'phy-mode' in the device tree.
In particular, the phy tx (and rx) delays are updated
again as per the 'phy-mode' *after* the code in here
runs.
Things worked before above commits, because the AR8031
comes out of reset with RX delay enabled, and the
at803x driver didn't touch the delay configuration at
all when "rgmii" mode was selected.
It appears the code in here tries to make device
trees work that incorrectly specify "rgmii", but
that can't work any more and it is imperative since
above commits to have the phy-mode configured
correctly in the device tree.
I suspect there are a few imx7d based boards using
the ar8031 phy and phy-mode = "rgmii", but given I
don't know which ones exactly, I am not in a
position to update the respective device trees.
Hence this patch is simply removing the superfluous
code from the imx7d initialisation. An alternative
could be to add a warning instead, but that would
penalize all boards that have been updated already.
Signed-off-by: André Draszik <git@andred.net>
CC: Russell King <linux@armlinux.org.uk>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
CC: Kate Stewart <kstewart@linuxfoundation.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Leonard Crestez <leonard.crestez@nxp.com>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The rtc8564 is made by Epson but is similar to the NXP pcf8563. Use the
correct vendor name.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
<generated/at91_pm_data-offsets.h> is only generated and included by
arch/arm/mach-at91/, so it does not need to reside in the globally
visible include/generated/.
I renamed it to arch/arm/mach-at91/pm_data-offsets.h since the prefix
'at91_' is just redundant in mach-at91/.
My main motivation of this change is to avoid the race condition for
the parallel build (-j) when CONFIG_IKHEADERS is enabled.
When it is enabled, all the headers under include/ are archived into
kernel/kheaders_data.tar.xz and exposed in the sysfs.
In the parallel build, we have no idea in which order files are built.
- If at91_pm_data-offsets.h is built before kheaders_data.tar.xz,
the header will be included in the archive. Probably nobody will
use it, but it is harmless except that it will increase the archive
size needlessly.
- If kheaders_data.tar.xz is built before at91_pm_data-offsets.h,
the header will not be included in the archive. However, in the next
build, the archive will be re-generated to include the newly-found
at91_pm_data-offsets.h. This is not nice from the build system point
of view.
- If at91_pm_data-offsets.h and kheaders_data.tar.xz are built at the
same time, the corrupted header might be included in the archive,
which does not look nice either.
This commit fixes the race.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20190823024346.591-1-yamada.masahiro@socionext.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Translation faults arising from cache maintenance instructions are
rather unhelpfully reported with an FSR value where the WnR field is set
to 1, indicating that the faulting access was a write. Since cache
maintenance instructions on 32-bit ARM do not require any particular
permissions, this can cause our private 'cacheflush' system call to fail
spuriously if a translation fault is generated due to page aging when
targetting a read-only VMA.
In this situation, we will return -EFAULT to userspace, although this is
unfortunately suppressed by the popular '__builtin___clear_cache()'
intrinsic provided by GCC, which returns void.
Although it's tempting to write this off as a userspace issue, we can
actually do a little bit better on CPUs that support LPAE, even if the
short-descriptor format is in use. On these CPUs, cache maintenance
faults additionally set the CM field in the FSR, which we can use to
suppress the write permission checks in the page fault handler and
succeed in performing cache maintenance to read-only areas even in the
presence of a translation fault.
Reported-by: Orion Hodson <oth@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Since commit ad67b74d2469d9b8 ("printk: hash addresses printed with
%p"), an obfuscated kernel pointer is printed at every boot if
debugging is enabled:
vdso: 1 text pages at base (____ptrval____)
Remove the print completely, as it's useless without the address.
Based on commit 0f1bf7e39822476b ("arm64/vdso: don't leak kernel
addresses").
Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
When you run "make clean" for arm, it never visits mach-* or plat-*
directories because machine-y and plat-y are just empty.
When cleaning, all machine, plat directories are accumulated to
machine-, plat-, respectively. So, let's pass them to core- to
clean up those directories.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
This open-coded nop as mov r0, r0 is a development history
artifact.
First commit b11fe38883d1
("ARM: 6663/1: make Thumb2 kernel entry point more similar
to the ARM one") moved the code around so that the nops
would come before the conditional thumb instructions, as it
turned out that some boot loaders were patching the initial
nop instructions in the kernel. At this point it is clear
that all mov r0,r0 are open-coded nops.
Then commit 81a0bc39ea19 ("ARM: add UEFI stub support")
moved things around and defined __nop for EFI support and
missed this open-coded nop.
commit 06a4b6d009a1
("ARM: 8677/1: boot/compressed: fix decompressor header
layout for v7-M") makes all invocations of __nop be wide,
but that is fine, because this is what we want: the
mov r0,r0 is inside ifndef CONFIG_THUMB2_KERNEL.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Roy Franz <rfranz@marvell.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
This was unclear to me until Russell explained the obvious
that 8 nops are added to offset an a.out image. Reading
git history reveals that thumb kernels first removed the
nops and then kept 7 of them (the last instruction being
a switch to thumb mode) as it turns out that some boot
loaders were using this as a "patch area". Also the magic
numbers after the initial nops and the jump of course
need to stay in the same offset for kernel file
detection.
Make the code easier to understand with a comment.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Roy Franz <rfranz@marvell.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
To use Fastfpe, a user is supposed to enable CONFIG_FPE_FASTFPE
and put downstream source files into arch/arm/fastfpe/.
It is not working for O= build because $(wildcard arch/arm/fastfpe)
checks if it exists in $(objtree), not in $(srctree).
Add the $(srctree)/ prefix to fix it.
While I was here, I slightly refactored the code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Clang produces references to __aeabi_uidivmod and __aeabi_idivmod for
arm-linux-gnueabi and arm-linux-gnueabihf targets incorrectly when AEABI
is not selected (such as when OABI_COMPAT is selected).
While this means that OABI userspaces wont be able to upgraded to
kernels built with Clang, it means that boards that don't enable AEABI
like s3c2410_defconfig will stop failing to link in KernelCI when built
with Clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/482
Link: https://groups.google.com/forum/#!msg/clang-built-linux/yydsAAux5hk/GxjqJSW-AQAJ
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
There is error from cppcheck tool.
"Shifting signed 32-bit value by 31 bits is undefined behaviour errors"
This error is false positive.
change to use BIT() macro for improvement.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
This commit removes the open-coded CPU-offline notification with new
common code. In particular, this change avoids calling scheduler code
using RCU from an offline CPU that RCU is ignoring. This is a minimal
change. A more intrusive change might invoke the cpu_check_up_prepare()
and cpu_set_state_online() functions at CPU-online time, which would
allow onlining throw an error if the CPU did not go offline properly.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
clang warns:
arch/arm/mach-iop13xx/pci.c:292:7: warning: logical not is only applied
to the left hand side of this comparison [-Wlogical-not-parentheses]
if (!iop13xx_atux_pci_status(1) == 0)
^ ~~
arch/arm/mach-iop13xx/pci.c:439:7: warning: logical not is only applied
to the left hand side of this comparison [-Wlogical-not-parentheses]
if (!iop13xx_atue_pci_status(1) == 0)
^ ~~
!func() == 0 is equivalent to func(), which clears up this warning and
makes the code more readable.
Link: https://github.com/ClangBuiltLinux/linux/issues/543
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
In the commit ef41b5c92498 ("ARM: make kernel oops easier to read"),
- .word 0xe92d0000 >> 10 @ stmfd sp!, {}
+ .word 0xe92d0000 >> 11 @ stmfd sp!, {}
then the shift need to change to 11.
Signed-off-by: Lvqiang Huang <Lvqiang.Huang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
A timing hazard exists when an early fork/exec thread begins
exiting and sets its mm pointer to NULL while a separate core
tries to update the section information.
This commit ensures that the mm pointer is not NULL before
setting its section parameters. The arguments provided by
commit 11ce4b33aedc ("ARM: 8672/1: mm: remove tasklist locking
from update_sections_early()") are equally valid for not
requiring grabbing the task_lock around this check.
Fixes: 08925c2f124f ("ARM: 8464/1: Update all mm structures with section adjustments")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The watchdog has a clock on all our SoCs, but it wasn't always listed.
Add it to the devicetree where it's missing.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
The watchdog has an interrupt on all our SoCs, but it wasn't always listed.
Add it to the devicetree where it's missing.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
The CSI controller embedded in the A20 can be supported by our new driver.
Let's add it to our DT.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Unlike the A10 that has 6 timers available, the v3s has only three, with only
three interrupts. Let's change the compatible to reflect that, and add the
missing interrupts.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Unlike the A10 that has 6 timers available, the H3 has only two, with only
two interrupts, just like the A23. Let's change the compatible to reflect
that.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Unlike the A10 that has 6 timers available, the A83t has only two, with
only two interrupts, just like the A23. Let's change the compatible to
reflect that.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Unlike the A10 that has 6 timers available, the A23 and A33 has only two,
with only two interrupts. Let's change the compatible to reflect that.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
The timer unit in the A31 has 6 interrupts available. List all of them.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
The timer unit in the sun5i die has 6 interrupts available. List all of
them.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
