summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2019-11-15ARM: dts: pandora-common: define wl1251 as child node of mmc3H. Nikolaus Schaller
Since v4.7 the dma initialization requires that there is a device tree property for "rx" and "tx" channels which is not provided by the pdata-quirks initialization. By conversion of the mmc3 setup to device tree this will finally allows to remove the OpenPandora wlan specific omap3 data-quirks. Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: <stable@vger.kernel.org> # v4.7+ Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-14ARM: dts: bcm2711-rpi-4: Enable GENET supportStefan Wahren
This enables the Gigabit Ethernet support on the Raspberry Pi 4. The defined PHY mode is equivalent to the default register settings in the downstream tree. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-11-14ARM: dts: bcm2711: force CMA into first GB of memoryNicolas Saenz Julienne
arm64 places the CMA in ZONE_DMA32, which is not good enough for the Raspberry Pi 4 since it contains peripherals that can only address the first GB of memory. Explicitly place the CMA into that area. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-11-14ARM: dts: logicpd-torpedo: Remove unnecessary notes/commentsAdam Ford
There used to be a bug in the video driver that caused the timings for the LCD to calculate in a way on the DM3730 which made it hang. The work around for this bug was to set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 in the kernel. This work around is no longer needed as the video drivers have been corrected. This patch removes the legacy note. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-14ARM: dts: logicpd-torpedo-baseboard: Enable HDQAdam Ford
The baseboard of the Logic PD Torpedo development kit has a socket for a rechargable battery. The battery is monitored by a charger which can communicate of the the 1-wire HDQ pin. This patch enables the pinmux for the HDQ pin. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-14ARM: OMAP2+: Drop useless gptimer option for omap4Tony Lindgren
We have local timers on Cortex-A9, so using the gptimer option makes no sense. Let's just drop it for omap4 to simplify the timer options a bit. If this is really needed, it can be still done by specifying dts properties in the board specific file for assigned-clocks and assigned-clock-parents. This gets us a bit closer to start dropping legacy platform data for gptimers except for timer1 that is used for system clockevent. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-13ARM: dts: exynos: Add support for the touch-sensitive buttons on Midas familySimon Shields
Add support for the capacitive touch-sensitive buttons of the following smartphones: - Samsung Galaxy SIII (I9300) - Samsung Galaxy SIII 4G (I9305) - Samsung Galaxy Note II (N7100) - Samsung Galaxy Note II 4G (N7105) The keycodes correspond to markings on the phone case. Signed-off-by: Simon Shields <simon@lineageos.org> [GNUtoo@cyberdimension.org: Fixed keycodes, modified commit message] Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-11-12Merge tag 'omap-for-v5.5/soc-late-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc Few late SoC changes for v5.5 merge window These changes just clean up few typos, and there is one non-critical correction of missing put_device() after calling of_platform_populate() for display controller. Naturally none of this is urgent and can be merged when suitable. * tag 'omap-for-v5.5/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Add missing put_device() call in omapdss_init_of() OMAP2: fixup doc comments in omap_device ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1 ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize") Link: https://lore.kernel.org/r/pull-1573579927-542764@atomide.com-2 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-12Merge tag 'omap-for-v5.5/dt-late-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Few late dts changes for omaps for v5.5 merge window Let's configure omap3 rng as we can now easily do it with a dts change only by tagging it with status = "disabled" for n900 where it's not accessible. This improves the boot-up time with distros quite a bit with proper entropy source around. There's also another minor update for logicpd-torpedo that does not have USB host pins wired. * tag 'omap-for-v5.5/dt-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: logicpd-torpedo: Disable USB Host ARM: dts: Configure omap3 rng Link: https://lore.kernel.org/r/pull-1573579927-542764@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-13ARM: config: multi_v5: ASPEED SDHCI, SGPIOJoel Stanley
Enable drivers used by the ASPEED AST2400 SoC so the multi v5 defconfig can run on those boards. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-13ARM: configs: multi_v7: ASPEED network, gpio, FSIJoel Stanley
Enable drivers used by the ASPEED SoCs so the multi v7 defconfig can run on those boards. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-13ARM: config: aspeed-g4: Add MMC, and cleanupJoel Stanley
The PCA muxes now depend on I2C_MUX. SPI si now required by SPI-NOR. Add the eMMC driver, and remove the FSI SBEFIFO which is not used on AST2400 systems. The remaining changes are cleanups from regenerating the defconfig. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-13ARM: config: aspeed-g5: Add SGPIO and FSI driversJoel Stanley
These are recently merged drivers for ASPEED systems. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-13ARM: config: aspeed-g5: Enable 8250_DW quirksJoel Stanley
This driver option is used by the AST2600 A0 boards to work around a hardware issue. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-11Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq drivers updates for v5.5 from Viresh Kumar: "This pull request contains: - Updates to ti-cpufreq driver and DT files to support new platforms and migrate from opp-v1 bindings to opp-v2 bindings (H. Nikolaus Schaller and Adam Ford). - Merging of arm_big_little and vexpress-spc drivers and related cleanup (Sudeep Holla). - Fix for imx's default speed grade value (Anson Huang). - Minor cleanup patch for s3c64xx (Nathan Chancellor). - Fix CPU speed bin detection for sun50i (Ondrej Jirman)." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: sun50i: Fix CPU speed bin detection cpufreq: vexpress-spc: find and skip duplicates when merging frequencies cpufreq: vexpress-spc: use macros instead of hardcoded values for cluster ids cpufreq: s3c64xx: Remove pointless NULL check in s3c64xx_cpufreq_driver_init cpufreq: imx-cpufreq-dt: Correct i.MX8MN's default speed grade value cpufreq: vexpress-spc: fix some coding style issues cpufreq: vexpress-spc: remove lots of debug messages cpufreq: vexpress-spc: drop unnessary cpufreq_arm_bL_ops abstraction cpufreq: merge arm_big_little and vexpress-spc cpufreq: scpi: remove stale/outdated comment about the driver ARM: dts: Add OPP-V2 table for AM3517 cpufreq: ti-cpufreq: Add support for AM3517 ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,am3517 DTS: bindings: omap: update bindings documentation ARM: dts: omap34xx & omap36xx: replace opp-v1 tables by opp-v2 for cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
2019-11-11Merge tag 'v5.4-next-dts' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt6323 pmic: add nodes for RTC, keys, codec and power-controller * tag 'v5.4-next-dts' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt6323: add keys, power-controller, rtc and codec Link: https://lore.kernel.org/r/82f16220-d0e1-6e32-088e-c889ef6bdff3@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-11ARM: dts: logicpd-torpedo: Disable USB HostAdam Ford
While the OMAP3 family has a USB Host controller, the Torpedo does not route the host pins off the board rendering it useless. This patch removes the host references. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-11can: mcp251x: get rid of legacy platform dataAndy Shevchenko
Instead of using legacy platform data, switch to use device properties. For clock frequency we are using well established clock-frequency property. Users, two for now, are also converted here. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-11ARM: OMAP2+: Add missing put_device() call in omapdss_init_of()Markus Elfring
A coccicheck run provided information like the following. arch/arm/mach-omap2/display.c:268:2-8: ERROR: missing put_device; call of_find_device_by_node on line 258, but without a corresponding object release within this function. Generated by: scripts/coccinelle/free/put_device.cocci Thus add the missed function call to fix the exception handling for this function implementation. Fixes: e0c827aca0730b51f38081aa4e8ecf0912aab55f ("drm/omap: Populate DSS children in omapdss driver") Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-11OMAP2: fixup doc comments in omap_deviceBen Dooks (Codethink)
The documentation comments in this file are out of date with the code, so fix this to avoid the following warnings: arch/arm/mach-omap2/omap_device.c:133: warning: Function parameter or member 'pdev' not described in 'omap_device_build_from_dt' arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdev_name' description in 'omap_device_build_from_dt' arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdev_id' description in 'omap_device_build_from_dt' arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'oh' description in 'omap_device_build_from_dt' arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdata' description in 'omap_device_build_from_dt' arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdata_len' description in 'omap_device_build_from_dt' arch/arm/mach-omap2/omap_device.c:309: warning: Function parameter or member 'pdev' not described in 'omap_device_get_context_loss_count' arch/arm/mach-omap2/omap_device.c:309: warning: Excess function parameter 'od' description in 'omap_device_get_context_loss_count' arch/arm/mach-omap2/omap_device.c:335: warning: Function parameter or member 'ohs' not described in 'omap_device_alloc' arch/arm/mach-omap2/omap_device.c:335: warning: Function parameter or member 'oh_cnt' not described in 'omap_device_alloc' arch/arm/mach-omap2/omap_device.c:335: warning: Excess function parameter 'oh' description in 'omap_device_alloc' arch/arm/mach-omap2/omap_device.c:335: warning: Excess function parameter 'pdata' description in 'omap_device_alloc' arch/arm/mach-omap2/omap_device.c:335: warning: Excess function parameter 'pdata_len' description in 'omap_device_alloc' arch/arm/mach-omap2/omap_device.c:659: warning: Function parameter or member 'pdev' not described in 'omap_device_register' arch/arm/mach-omap2/omap_device.c:659: warning: Excess function parameter 'od' description in 'omap_device_register' arch/arm/mach-omap2/omap_device.c:682: warning: Function parameter or member 'pdev' not described in 'omap_device_enable' arch/arm/mach-omap2/omap_device.c:682: warning: Excess function parameter 'od' description in 'omap_device_enable' arch/arm/mach-omap2/omap_device.c:713: warning: Function parameter or member 'pdev' not described in 'omap_device_idle' arch/arm/mach-omap2/omap_device.c:713: warning: Excess function parameter 'od' description in 'omap_device_idle' Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-11Merge branch 'omap-for-v5.5/omap1' into omap-for-v5.5/socTony Lindgren
2019-11-11ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1Uwe Kleine-König
All of arch/arm/mach-omap1/Kconfig is enclosed in a big "if ARCH_OMAP1" and so every symbol already has a dependency on ARCH_OMAP1 even without mentioning it in their list of dependencies. Also dependencies on ARCH_OMAP can be dropped as it is selected by ARCH_OMAP1. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-11arch: rely on asm-generic/io.h for default ioremap_* definitionsChristoph Hellwig
Various architectures that use asm-generic/io.h still defined their own default versions of ioremap_nocache, ioremap_wt and ioremap_wc that point back to plain ioremap directly or indirectly. Remove these definitions and rely on asm-generic/io.h instead. For this to work the backup ioremap_* defintions needs to be changed to purely cpp macros instea of inlines to cover for architectures like openrisc that only define ioremap after including <asm-generic/io.h>. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Palmer Dabbelt <palmer@dabbelt.com>
2019-11-11arm: remove ioremap_cachedChristoph Hellwig
No users of ioremap_cached are left, remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2019-11-11dma-direct: provide mmap and get_sgtable method overridesChristoph Hellwig
For dma-direct we know that the DMA address is an encoding of the physical address that we can trivially decode. Use that fact to provide implementations that do not need the arch_dma_coherent_to_pfn architecture hook. Note that we still can only support mmap of non-coherent memory only if the architecture provides a way to set an uncached bit in the page tables. This must be true for architectures that use the generic remap helpers, but other architectures can also manually select it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-11video: backlight: tosa: Use GPIO lookup tableArnd Bergmann
The driver should not require a machine specific header. Change it to pass the GPIO line through a lookup table, and move the timing generator definitions into the drivers itself. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11mfd: db8500-prcmu: Support U8420-sysclk firmwareLinus Walleij
There is a distinct version of the Ux500 U8420 variant with "sysclk", as can be seen from the vendor code that didn't make it upstream, this firmware lacks the ULPPLL (ultra-low power phase locked loop) which in effect means that the timer clock is instead wired to the 32768 Hz always-on clock. This has some repercussions when enabling the timer clock as the code as it stands will disable the timer clock on these platforms (lacking the so-called "doze mode") and obtaining the wrong rate of the timer clock. The timer frequency is of course needed very early in the boot, and as a consequence, we need to shuffle around the early PRCMU init code: whereas in the past we did not need to look up the PRCMU firmware version in the early init, but now we need to know the version before the core system timers are registered so we restructure the platform callbacks to the PRCMU so as not to take any arguments and instead look up the resources it needs directly from the device tree when initializing. As we do not yet support any platforms using this firmware it is not a regression, but as PostmarketOS is starting to support products with this firmware we need to fix this up. The low rate of 32kHz also makes the MTU timer unsuitable as delay timer but this needs to be fixed in a separate patch. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-10Merge tag 'v5.5-rockchip-dts32-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt HDMI-audio support for Veyron devices. * tag 'v5.5-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add HDMI audio support to rk3288-veyron-mickey ARM: dts: rockchip: Add HDMI support to rk3288-veyron-analog-audio Link: https://lore.kernel.org/r/1926436.N9mSsAMzn9@phil Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-10Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A set of fixes that have trickled in over the last couple of weeks: - MAINTAINER update for Cavium/Marvell ThunderX2 - stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for CAN interfaces - i.MX fixes for voltage regulator GPIO mappings, fixes voltage scaling issues - More i.MX fixes for various issues on i.MX eval boards: interrupt storm due to u-boot leaving pins in new states, fixing power button config, a couple of compatible-string corrections. - Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets - A few documentation tweaks and a fix of a memory leak in the reset subsystem" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: update Cavium ThunderX2 maintainers ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 arm64: dts: zii-ultra: fix ARM regulator GPIO handle ARM: sunxi: Fix CPU powerdown on A83T ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend arm64: dts: imx8mn: fix compatible string for sdma arm64: dts: imx8mm: fix compatible string for sdma reset: fix reset_control_ops kerneldoc comment ARM: dts: imx6-logicpd: Re-enable SNVS power key soc: imx: gpc: fix initialiser format ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts arm64: dts: ls1028a: fix a compatible issue reset: fix reset_control_get_exclusive kerneldoc comment reset: fix reset_control_lookup kerneldoc comment reset: fix of_reset_control_get_count kerneldoc comment reset: fix of_reset_simple_xlate kerneldoc comment reset: Fix memory leak in reset_control_array_put()
2019-11-10arm: dts: mt6323: add keys, power-controller, rtc and codecJosef Friedl
support poweroff and power-related keys on bpi-r2 Suggested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Josef Friedl <josef.friedl@speed.at> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-11-10irqchip/gic-v3: Fix __iomem warningBen Dooks (Codethink)
The __iomem attribute should go before the * in the prototype. Move to silence the following sparse warnings: ./arch/arm/include/asm/arch_gicv3.h:340:15: warning: incorrect type in argument 1 (different address spaces) ./arch/arm/include/asm/arch_gicv3.h:340:15: expected void const volatile [noderef] <asn:2> *addr ./arch/arm/include/asm/arch_gicv3.h:340:15: got void * ./arch/arm/include/asm/arch_gicv3.h:343:17: warning: incorrect type in argument 2 (different address spaces) ./arch/arm/include/asm/arch_gicv3.h:343:17: expected void volatile [noderef] <asn:2> *addr ./arch/arm/include/asm/arch_gicv3.h:343:17: got void * ./arch/arm/include/asm/arch_gicv3.h:350:37: warning: incorrect type in argument 2 (different address spaces) ./arch/arm/include/asm/arch_gicv3.h:350:37: expected void volatile [noderef] <asn:2> *addr ./arch/arm/include/asm/arch_gicv3.h:350:37: got void *[noderef] <asn:2> addr drivers/irqchip/irq-gic-v3-its.c:2832:46: warning: incorrect type in argument 2 (different address spaces) drivers/irqchip/irq-gic-v3-its.c:2832:46: expected void *[noderef] <asn:2> addr drivers/irqchip/irq-gic-v3-its.c:2832:46: got void [noderef] <asn:2> * ./arch/arm/include/asm/arch_gicv3.h:340:15: warning: incorrect type in argument 1 (different address spaces) ./arch/arm/include/asm/arch_gicv3.h:340:15: expected void const volatile [noderef] <asn:2> *addr ./arch/arm/include/asm/arch_gicv3.h:340:15: got void * ./arch/arm/include/asm/arch_gicv3.h:343:17: warning: incorrect type in argument 2 (different address spaces) ./arch/arm/include/asm/arch_gicv3.h:343:17: expected void volatile [noderef] <asn:2> *addr ./arch/arm/include/asm/arch_gicv3.h:343:17: got void * ./arch/arm/include/asm/arch_gicv3.h:350:37: warning: incorrect type in argument 2 (different address spaces) ./arch/arm/include/asm/arch_gicv3.h:350:37: expected void volatile [noderef] <asn:2> *addr ./arch/arm/include/asm/arch_gicv3.h:350:37: got void *[noderef] <asn:2> addr Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191017113341.13778-1-ben.dooks@codethink.co.uk
2019-11-08Merge tag 'at91-5.5-defconfig' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig AT91 defconfig for 5.5 - Unselect PIT now that the TCBs can be used at boot time * tag 'at91-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: at91: unselect PIT Link: https://lore.kernel.org/r/20191107222445.GA202433@piout.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-08Merge tag 'at91-5.5-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.5 - New Overkiz Kizbox3 board - Rework of the other Kizbox device trees - New filters for i2c on sama5d4 and sama5d2 * tag 'at91-5.5-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards dt-bindings: arm: at91: Document Kizbox2-2 board binding ARM: dts: at91: sama5d4_xplained: add digital filter for i2c ARM: dts: at91: sama5d2_xplained: add analog and digital filter for i2c ARM: dts: at91: add Overkiz KIZBOX3 board dt-bindings: arm: at91: Document Kizbox3 HS board binding dt-bindings: Add vendor prefix for Overkiz SAS ARM: dts: at91: sama5d2: add an rtc label for derived boards ARM: dts: at91: sama5d27_som1_ek: add mmc capabilities for SDMMC0 Link: https://lore.kernel.org/r/20191108070938.GA215379@piout.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-08Merge tag 'aspeed-5.5-devicetree' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.5 - Lots of work on the AST2600 boards as bringup continues. There's the eval board, and two IBM boards called Tacoma and Rainier - A new flash layout for OpenBMC systems with larger flashes - Better support for the MAC clocking when talking to a NCSI device, making Linux less reliant on u-boot having done the correct thing - LED fixes for vesin and fp5280g2 - SGPIO support - Facebook network BMC cleanup with the common hardware moved to a shared dtsi * tag 'aspeed-5.5-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: (48 commits) ARM: dts: aspeed-g6: Add timer description ARM: dts: aspeed: ast2600evb: Enable i2c buses ARM: dts: aspeed-g5: Add SGPIO description ARM: dts: aspeed: yamp: Use common dtsi ARM: dts: aspeed: minipack: Use common dtsi ARM: dts: aspeed: cmm: Use common dtsi ARM: dts: aspeed: Common dtsi for Facebook AST2500 Network BMCs ARM: dts: aspeed: rainier: gpio-keys for PSU presence ARM: dts: aspeed: rainier: Fix i2c eeprom size ARM: dts: tacoma: Hog LPC pinmux ARM: dts: aspeed: rainier: Enable VUART1 ARM: dts: aspeed: rainier: Add i2c eeproms ARM: dts: aspeed: tacoma: Use 64MB for firmware memory ARM: dts: aspeed: tacoma: Add host FSI description ARM: dts: ast2600evb: Enable UART workaround ARM: dts: aspeed: tacoma: Add UART1 and workaround ARM: dts: aspeed-g6: Add remaining UARTs ARM: dts: aspeed-g6: Fix i2c clock source ARM: dts: aspeed: Add RCLK to MAC clocks for RMII interfaces ARM: dts: aspeed: tacoma: Enable FMC and SPI devices ... Link: https://lore.kernel.org/r/CACPK8Xe8XiJ+oEp3_AXO5Mox-mXWVrOJKQLJMKJxg1WdYCTzMw@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-08Merge remote-tracking branch 'kvmarm/misc-5.5' into kvmarm/nextMarc Zyngier
2019-11-08KVM: arm64: Opportunistically turn off WFI trapping when using direct LPI ↵Marc Zyngier
injection Just like we do for WFE trapping, it can be useful to turn off WFI trapping when the physical CPU is not oversubscribed (that is, the vcpu is the only runnable process on this CPU) *and* that we're using direct injection of interrupts. The conditions are reevaluated on each vcpu_load(), ensuring that we don't switch to this mode on a busy system. On a GICv4 system, this has the effect of reducing the generation of doorbell interrupts to zero when the right conditions are met, which is a huge improvement over the current situation (where the doorbells are screaming if the CPU ever hits a blocking WFI). Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Link: https://lore.kernel.org/r/20191107160412.30301-3-maz@kernel.org
2019-11-07xen: mm: make xen_mm_init staticBen Dooks (Codethink)
The xen_mm_init is not exported or used outside of the file it is declared in, so make it static. This fixes the following sparse warning: arch/arm/xen/mm.c:136:12: warning: symbol 'xen_mm_init' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-11-07xen: mm: include <xen/xen-ops.h> for missing declarationsBen Dooks (Codethink)
Include <xen/xen-ops.h> for xen_{create,destroy}_contigous_region call declarations. Fixes the following sparse warnings: arch/arm/xen/mm.c:119:5: warning: symbol 'xen_create_contiguous_region' was not declared. Should it be static? arch/arm/xen/mm.c:131:6: warning: symbol 'xen_destroy_contiguous_region' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-11-07ARM: dts: aspeed-g6: Add timer descriptionJoel Stanley
The AST2600 has 8 32-bit timers on the APB bus. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-07ARM: dts: aspeed: ast2600evb: Enable i2c busesJoel Stanley
With the exception of i2c10 and i2c11 which conflict with the pins for the third and forth MDIO controllers. i2c0 has an ADT7490 fan controller/thermal monitor device connected. The devicetree describes an adt74490 on i2c0, however bus that it appears on depends on jumper settings, so it may not be present on all EVBs. It is included to assist testing of I2C. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-07ARM: dts: at91: add a dts and dtsi file for kizbox2 based boardsKamel Bouhara
There are several boards available depending on the PCB (3 antennas support and several revison). Add a dtsi file to share common binding between all kizbox2 boards. This patch also add support for the kizbox2-2 variant. Signed-off-by: Kévin RAYMOND <k.raymond@overkiz.com> Signed-off-by: Mickael GARDET <m.gardet@overkiz.com> Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> Link: https://lore.kernel.org/r/20191105212234.22999-2-kamel.bouhara@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-06Merge tag 'qcom-dts-for-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm Device Tree Changes for v5.5 * Add thermal zones and IRQ support for MSM8974 * Add 5vs2 regulator node for PM8941 * Add reboot-mode node, fix sdhci and card detect on MSM8974-FP2 * Add IPQ4019 SDHCI node * tag 'qcom-dts-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: msm8974: thermal: Add thermal zones for each sensor ARM: dts: msm8974: thermal: Add interrupt support ARM: dts: qcom: pm8941: add 5vs2 regulator node ARM: dts: msm8974-FP2: add reboot-mode node ARM: dts: msm8974-FP2: Increase load on l20 for sdhci ARM: dts: msm8974-FP2: Drop unused card-detect pin ARM: dts: qcom: ipq4019: Add SDHCI controller node Link: https://lore.kernel.org/r/1573068840-13098-5-git-send-email-agross@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06Merge tag 'qcom-defconfig-for-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig Qualcomm ARM Based defconfig Updates for v5.5 * Enable OCMEM support * tag 'qcom-defconfig-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: qcom_defconfig: add ocmem support Link: https://lore.kernel.org/r/1573068840-13098-3-git-send-email-agross@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06Merge tag 'imx-defconfig-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig i.MX defconfig update for 5.5: - Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support in imx_v6_v7_defconfig. - Enable newly added S32V234 SoC and its UART driver support in arm64 defconfig. - Built i.MX8QXP SCU key driver as module in arm64 defconfig. - Change AT803X Ethernet PHY driver from module to built-in, so that we can boot i.MX8MM EVK board with rootfs on NFS. * tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: Change CONFIG_AT803X_PHY from m to y ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052 arm64: defconfig: Enable configs for S32V234 arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module ARM: imx_v6_v7_defconfig: Build USB_CONFIGFS into kernel ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX7ULP_WDT by default Link: https://lore.kernel.org/r/20191105150315.15477-7-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06Merge tag 'imx-dt64-tmu-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt LX2160A TMU support for 5.5: - Add TMU (Thermal Monitoring Unit) device node to enable thermal support on LX2160A SoC. * tag 'imx-dt64-tmu-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: lx2160a: add tmu device node ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk ARM: dts: imx7s: Correct GPT's ipg clock source ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' ARM: dts: imx6q-logicpd: Re-Enable SNVS power key arm64: dts: lx2160a: Correct CPU core idle state name arm64: dts: zii-ultra: fix ARM regulator states soc: imx: imx-scu: Getting UID from SCU should have response Link: https://lore.kernel.org/r/20191105150315.15477-6-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06Merge tag 'imx-dt-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree changes for 5.5: - New board support: Netronix E60K02 and Kobo Clara HD, Kontron N6311 and N6411, OPOS6UL and OPOS6ULDev. - Correct speed grading fuse settings and add opp-suspend property for i.MX7D device tree. - Move usdhc clocks assignment from SoC to board level DTS for imx7ulp, and use APLL_PFD1 as usdhc's clock source on imx7ulp-evk board. - Add missing cooling device properties for CPUs for i.MX6/7 SoCs. - Add sensor GPIO regulator and assign power supplies for magnetometer for imx6ul-14x14-evk board. - Replace "simple-bus" with "simple-mfd" for ANATOP device for i.MX6/7 SoCs. - Fix DTC W=1 warnings by not using simple-audio-card,dai-link on imx6qdl-gw551x and imx6q-gw54xx board. - Move to use DRM bindings for the Seiko 43WVF1G panel on imx53-qsb. - A series from Frieder Schrempf to support more i.MX6UL/ULL-based SoMs and boards from Kontron Electronics GmbH. - A few patches from Michal Vokáč to enable more devices support on imx6dl-yapp4 board. - A patch series from Philippe Schenker to improve i.MX6/7 Apalis and Colibri board support. - A patch series from Sébastien Szymanski to update i.MX6 APF6/APF6Dev device tree with more devices added and adopting DRM bindings for display. - Random improvements, clean-up and device additions on various boards. * tag 'imx-dt-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (68 commits) ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix indentation ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent polarity to usb nodes ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path' ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' and 'N6411 S' ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file ARM: dts: imx6ul-kontron-n6310-s: Disable the snvs-poweroff driver ARM: dts: Add support for two more Kontron SoMs N6311 and N6411 ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate file ARM: dts: imx7ulp-evk: Use APLL_PFD1 as usdhc's clock source ARM: dts: imx: add devicetree for Kobo Clara HD ARM: dts: add Netronix E60K02 board common file ARM: dts: vf-colibri: fix typo in top-level module compatible ARM: dts: imx53-qsb: Use DRM bindings for the Seiko 43WVF1G panel ARM: dts: imx53: Spelling s/configration/configuration/ ARM: dts: imx6ul-14x14-evk: Assign power supplies for magnetometer ARM: dts: imx6ul-14x14-evk: Fix the magnetometer node name ARM: dts: imx6ul-14x14-evk: Add sensors' GPIO regulator ARM: dts: imx6ul: Disable gpt2 by default ARM: dts: imx7d: Add missing cooling device properties for CPUs ARM: dts: imx6dl: Add missing cooling device properties for CPUs ... Link: https://lore.kernel.org/r/20191105150315.15477-4-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06Merge tag 'imx-soc-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc i.MX SoC update for 5.5: - Add arm64 Kconfig option for the NXP S32 platform. - Drop imx_anatop_usb_chrg_detect_disable() function which becomes unneeded, since all the necessary charger setup is done by the USB PHY driver now. - Add serial number support for i.MX6/7 SoCs by reading 64-bit SoC unique ID from OCOTP block. - Replace i.MX machine specific coherency exit implementation using the generic v7_exit_coherency_flush() function. * tag 'imx-soc-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: use generic function to exit coherency ARM: imx: Add serial number support for i.MX6/7 SoCs ARM: imx: Drop imx_anatop_usb_chrg_detect_disable() arm64: Introduce config for S32 Link: https://lore.kernel.org/r/20191105150315.15477-2-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06Merge tag 'samsung-soc-5.5' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung mach/soc changes for v5.5 1. Minor cleanups in S3C platforms, 2. Enable newly added EXYNOS_ASV (Adaptive Supply Voltage) driver. * tag 'samsung-soc-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos: Enable exynos-asv driver for ARCH_EXYNOS ARM: s3c: Rename s5p_usb_phy functions ARM: s3c: Rename s3c64xx_spi_setname() function Link: https://lore.kernel.org/r/20191104175902.12224-2-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06Merge tag 'sunxi-dt-for-5.5-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt A few more DT patches for 5.5, mostly: - USB3 support for the H6 - Deinterlacer support for the H3 - eDP Bridge support on the Teres-I - More DT cleanups thanks to the validation * tag 'sunxi-dt-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: Remove useless reset name ARM: dts: sun6i: Remove useless reset-names arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support arm64: dts: allwinner: h6: add USB3 device nodes dt-bindings: Add ANX6345 DP/eDP transmitter binding arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-I dts: arm: sun8i: h3: Enable deinterlace unit ARM: dts: sunxi: h3/h5: Add MBUS controller node dt-bindings: bus: sunxi: Add H3 MBUS compatible Link: https://lore.kernel.org/r/58ad00a8-9579-4811-969a-a74e331ee9a2.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06Merge tag 'sunxi-fixes-for-5.4-3' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt One patch to add back the PMU node that was removed because the interrupts were improper in a previous fixes PR. * tag 'sunxi-fixes-for-5.4-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: Re-add PMU node ARM: sunxi: Fix CPU powerdown on A83T ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend ARM: dts: sun7i: Drop the module clock from the device tree dt-bindings: media: sun4i-csi: Drop the module clock media: dt-bindings: Fix building error for dt_binding_check arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay arm64: dts: allwinner: a64: Drop PMU node arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay Link: https://lore.kernel.org/r/45023fa6-b2bc-4934-b85c-3e7841dde0b1.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit (git 2.34.1) at 2025-09-18 02:13:06 +0000